Sprite 16 Pro Brochure

: Sweepscrub Sprite 16 16 Pro Brochure Sprite_16___16_Pro_Brochure 1019 file product_file

Open the PDF directly: View PDF .
Page Count: 4

Sprite® 16 &

Sprite® 16 Pro

Wet-Dry Tank Vacuums

Designed for Stripping Floors… Fast

Smart cleaning.

A Nilfisk-Advance Brand

Versatile cleaning and stripping systems

designed for significant time and labor savings.

The enhanced Advance Sprite® 16 is the wet/dry tank vacuum that cleans and saves. Saves money, that is. Don’t waste

expensive time and labor on mops and buckets. For powerful, simple, quiet and efficient cleaning, put the Sprite 16 to

work on your floors. New features include a clear cover to allow workers to see the water and chemical level in the

tank, and a short pig-tail cord attaches to your 50 foot cable, eliminating the need to wrap a long cord around the

machine between uses. Plus, the Advance Sprite® 16 Pro is available with the same impressive wet/dry vacuum

capabilities along with a stripper dispensing tool and features designed to reduce the time it takes to strip floors.

Ideal applications include:

• Hospitals and Healthcare Facilities

• Schools and Universities

• Building Service Contractors

• Government Buildings and Installations

• Supermarkets

• Shopping Malls

• Warehouses

• Distribution Centers

• Retail Stores

• Airports

Wet-Dry Tank Vacuums with

Floor Stripping Features

Dependable Design

The Advance Sprite 16 consists of a powerful, yet quiet,

70 dB A, 1.3 hp 2 stage, by-pass motor, located under the

tank for protection from water and debris. The tank holds

16 gallons and is constructed of rugged and corrosion-

resistant polyethylene material. The tank conveniently

pivots on a hinge to dump contents, or drain through a

built-in hose. The entire tank lifts off for cleaning and

allows total access for motor service or maintenance.

Wet Pick-up

Sprite

16 picks up water faster than machines featuring a

hose and wand, effectively cleaning—even in tight spots.

The 24 inch front-mounted chemical resistant squeegee

maneuvers right up to walls and into corners, picking up

water and debris in both forward and reverse motion. A

simple-to-use floor pedal raises or lowers the squeegee,

making transport a snap. A oat system stops recovery to

prevent tank overflow.

Dry Pick-Up

For dry pick-up, insert a sock filter and use any of the dry

pick-up accessories. A washable exhaust lter helps

assure dust containment.

Floor Stripping

Get higher productivity, less mess, more even application,

decreased operator fatigue and increased safety, with the

Sprite 16 Pro. Designed for floor stripping applications,

the Sprite 16 Pro adds the ultimate stripping tool to the

versatile features of the Sprite 16, allowing users to

efficiently lay down and then pick up stripper solution.

The solution flows down to the floor via gravity and a

stripper applicator tool ensures that it is applied evenly

when the operator pulls the machine back. No power is

required. Once the stripper is applied and scrubbed to

loosen the floor finish, the squeegee tool replaces the

stripping tool and the machine is simply plugged in and

pushed forward to suck up the stripper/floor finish slurry

and any rinse water used.

Sprite® 16

Sprite® 16 Pro

Roto-molded poly tank is hinged for

tip-and-pour emptying. The tank can be

completely removed from the base for

easy clean-out.

Clear tank cover provides the

ability to see the water and

foam levels in the tank

Sock filter is placed over the

float assembly for dry pick-up

Tough polyethylene construction

and a functional design assure

durability and dependability

Drain hose facilitates easy

discarding of contents

Standard 24 inch front-mounted

squeegee easily maneuvers into

tight spaces, picking up water

in forward or reverse motion

Built-in float system automatically cuts

off the vacuum airflow when the tank

fills with liquid, preventing overflow

Simple design gives direct access to modular

vacuum motor. Four bolts and motor are

released for service or replacement.

The front mounted squeegee can increase

productivity by 80 percent over manual

pick-up tools.

The base features an easy-to-use rugged

on/off switch. A pedal for operating

the front mounted tool assemblies

is also included.

The standard 36 inch stripper applicator

delivers uniform chemical stripper

application.

The Sprite 16 Pro stripper dispenser

assembly includes provisions for routine

clean out and maintenance.

Cleanable, reusable filter keeps

exhaust air clean and muffles

vacuum motor sound

Roto-molded handle allows

ergonomic use by all personnel

New pig-tail cord attaches to your

50 foot cable, eliminating the

need to wrap a long cord around

the machine between uses

1.3 hp motor is conveniently

located under the tank for

protection from water and debris

Large rear wheels allow easy

transport, even up or down stairs

Front caster wheels provide for

easy transport

Sprite® 16 Pro

A Nilfisk-Advance Brand

Technical Specifications

Models Sprite® 16 Sprite® 16 Pro

Motor 1.3 hp, 115 V / 60 Hz, 2 stage

Air Flow 91 ft3/min (2,577 L/min)

Sealed Waterlift 88 in (223 cm)

Sound Level 70 dB A

Construction Roto-molded polyethylene tank

Tank Capacity 16 gal (60 L) actual working

Squeegee Width 24 in (61 cm), optional 30 in (76 cm)

Squeegee Pick-up Rate 11,500 ft2/hr (1,068 m2/hr)

Stripper Dispenser Width --- 36 in (91 cm)

Stripper Dispensing Rate --- 20,400 ft2/hr (1,895 m2/hr)

Stripper Solution Coverage --- 4,000 - 5,000 ft2/tankful

Power Cable 50 ft (15 m) detachable

Wheels 10 in x 1.75 in (25 cm x 4.5 cm) rear

4 in x 1 in (10 cm x 2.5 cm) front casters

Dimensions

Height (Dome) 35 in (89 cm)

Height (Handle) 39.5 in (100 cm)

Width 17 in (43 cm)

Length 40.5 in (103 cm)

Net Weight 77 lb (35 kg) 79 lb (36 kg)

Shipping Weight 85 lb (39 kg) 87 lb (40 kg)

Part Numbers 56381746 56381727

Specifications are subject to change without notice.

Productivity

Increase your staff’s efficiency with the Sprite® 16 wet/dry tank vacuum. The 24 inch

front mounted squeegee can increase productivity by 80% over manual pick up

tools, cleaning up to 11,500 square feet (1,068 m2) per hour. The tip-and-pour

feature makes these rugged, versatile wet/dry vacuums convenient to use. Plus,

the Sprite 16 Pro is available to cut down the time it takes to lay down stripper by

50-75%, completing 5,000 square feet (464 m2) in 15 minutes on a single tank.

Accessories and options

• The Advance Sprite 16 comes standard

with a 24 inch front mounted squeegee

and a wide range of optional accessories.

• The Advance Sprite 16 Pro additionally

includes the 36 inch stripper dispenser

assembly. This assembly and the

squeegee are front mounted and are

easily changed out.

Smart cleaning.

Our products are designed using innovative

technologies that increase productivity and

drive down the cost to clean.

Maintain peak performance with Nilfisk

Genuine OEM Parts.

A Nilfisk-Advance Brand www.advance-us.com

14600 21st Avenue North

Plymouth, MN 55447-3408

www.advance-us.com

Phone 800-850-5559

Fax 800-989-6566

240 Superior Boulevard

Mississauga, Ontario, Canada L5T 2L2

www.nilfisk-advance.ca

Phone 800-668-8400

Fax 800-263-5111

©2012 Nilfisk-Advance, Inc. Form L0809A 9-10-12