Sweepscrub Taski Swingo 5000 Rider Floor Scrubber Specifications User Manual

User Manual: Sweepscrub Taski-Swingo-5000-Rider-Floor-Scrubber-Specifications taski-swingo-5000-rider-floor-scrubber-specifications 2601 file product_file sweepscrub

Open the PDF directly: View PDF .
Page Count: 2

Key features:

• Unmatched productivity

• Powerful cleaning and drying results

• Total reliability

• Intelligence

Unmatched productivity

The patented Intelliflow system ensures always the right amount of

cleaning solution on the floor and leads to significant water savings.

These, in combination with the large 200 L tank and a high cleaning

speed of 7.5Km/h radically increase productivity and reduce the

number of time-consuming tank filling stops. The unique all wheel

steering makes the machine very agile to easy manoeuvre in congested

areas.

Powerful cleaning and drying results

The patented W-shaped squeegee follows the floor profile and allows

perfect water pick-up even in curves, while turning and on uneven

or structured floors. Special squeegee blades and a direct suction

line allow pick-up of small debris without clogging. This results in

both exceptional cleaning and immediate drying results, and hence a

consistently high and improved floor appearance.

Total Reliability

Engineered for durability and hard cleaning tasks, the TASKI swingo

5000 is constructed with high tech material and long life components

that increase machine uptime and reduce repair cost. All components

which need frequent maintenance are colour coded in yellow and can

be removed easily without tools. These features allow trouble-free

operation with a minimum of operator training needed and enhance

machine’s uptime.

Intelligence

The superior ergonomic design ensures operatives can work in a safe

and comfortable position. Good visibility and self adjusting squeegee

ensures ‘clean to edge’ performance. Low noise levels can be lowered

further by using the ECO mode, ideal for daytime cleaning.

TASKI®

swingo 5000

Large ride-on automatic scrubber drier

www.sealedair.com

Description

Theoretical performance 7875 m2/h Dimensions (L x W x H)

(height above driver’s seat)

178x109x140cm

Working width 105cm

Squeegee width 129cm Turning circle 200cm

Solution tank - flex tank (nominal) 200L Ramp with full tank w/o cleaning 15%

Recovery tank - ex tank (nominal) 210L Brush system 4x28cm

Rated voltage 24 V Brush pressure min. - max. 60-90Kg

Battery capacity 240-360 Ah/C5 Cleaning speed / Transportation speed 7.5Km/h / 8.0Km/h

Battery autonomy (nominal) 4.5-6.5h Sound level 67dB(A)

Machine weight ready for use

w/240 Ah batteries, 75 Kg driver

790Kg Electrical protection class III

Splash water protection class IPX3

Approvals CE/CB Test certificate

TASKI swingo 2500

Model SKU Number

TASKI swingo 5000 7518373

© Sealed Air Corporation 2014. All rights reserved. 21165 03/14 en

Description SKU Number Description SKU Number

Pad drive harpoon grip 28 cm 7510634 Battery tray 24V/360Ah 7518216

Scrubbing brush standard 28 cm 7519395 Flash light set 4128992

Scrubbing brush washed concrete 28 cm 7510632 Front headlight set 4128994

Scrubbing brush abrasive 28 cm 7510633 Drainage pump set 4129878

TASKI IntelliDose kit for swingo 4000/5000 7518212 Chassis protection set with protection wheels 4129878

Charger SPE 24V/30A Gel 230V Euro 7518213 Protection roof FOPS* 4129883

Battery traction block 6V/240Ah 7518215 Drain hose long 7519046

Battery traction tray 6V/330Ah 7519292 * In combination with chassis protection 4129882

Description of Features

BMS (Battery Management System): The optional on-board charger prevents deep discharging of the battery and monitors the charging process. It is

available for up to 330 Ah gel batteries only.

Intellifow (Cleaning Solution Dosing): The IntelliFlow system allows for a speed-dependent supply of cleaning solution. This feature ensures that the

amount of solution dosed onto the floor is always constant—no matter how fast the machine is operating. The result? No puddles in curves and turn as

well as a significant saving in cleaning solution, leading to significantly increased productivity of the machine.

ECO mode: ECO refers to energy saving by reducing the suction power with a simultaneous noise reduction of the suction motor that allows for day

time cleaning in noise sensitive environments like hospitals.

START/STOP program: All machine settings like solution flow level, brush pressure, ECO mode etc. are stored when finishing your cleaning operation

with this button and are recalled for starting your further operation. This feature ensures an immediate start with mostly same cleaning operations.