Viper Shovelnose Sn18wd Wet Dry Vac Parts And Operators Manual

: Sweepscrub Viper-Shovelnose-Sn18Wd-Wet-Dry-Vac-Parts-And-Operators-Manual viper-shovelnose-sn18wd-wet-dry-vac-parts-and-operators-manual 1281 file product_file

Open the PDF directly: View PDF .
Page Count: 13

Download
Open PDF In Browser	View PDF

VIPER

SHOVELNOSE
WET & DRY VAC

www.usviper.com

OWNERS MANUAL
IMPORTANT: READ OWNERS MANUAL CAREFULLY
Please fill out & return your warranty card!

MODEL#

SN18WD

SERIAL#

VIPER NORTH AMERICA
P.O. BOX 104
HAMILTON, MI 49419
(866) 418-4737
(866) 41 - VIPER

VIPER ...exceptional
value
REV.06(12-09)
VA41129

CONGRATULATIONS on your purchase of a Viper product,
and welcome to the V.I.P. family. We appreciate your
business and will do everything in our power to keep you
happy with your purchase for many years to come.

As part of the V.I.P. family, you are entitled to the best
protection by one of the most comprehensive warranties in
the industry.

Thank-you for purchasing Viper products!

Tom Vander Bie, CEO

TABLE OF CONTENTS
Safety Precautions

4

Handle Assembly

5

Machine Operation

6

Machine Maintenance & Storage

7

Parts Lists
Wiring Diagram

8-13
14

SAFETY PRECAUTIONS
!!! This machine must be grounded!
Grounding provides the path of least
resistance for electrical current. To
reduce the risk of electrical shock
should the machine malfunction, the
machine has a special grounding plug.
Do not remove the ground pin under
any circumstances!

- Without bag / filters in place.
- With the use of extension cords.
2) Before operating machine:
- Make sure all safety devices are
in place and operate properly.
3) When using machine:
- Do not run machine over cord.
- Do not pull machine by cord or
plug.
- Do not pull cord around sharp
edges or corners.
- Turn power switch to “off “ prior
to unplugging machine.
- Do not unplug by pulling on the
cord.
- Do not stretch cord.
- Do not handle plug with wet
hands.
- Keep cord away from heated
surfaces.
- Do not pick up burning or
smoking debris such as
cigarettes, matches or hot
ashes.
- Report machine damage or
faulty operation immediately.

This machine is intended for commercial
use. It is constructed for use in an
indoor environment and is not intended
for any other use. Use only
recommended accessories.
All operators shall read, understand
and exercise the following safety
precautions:

4) Before leaving or servicing machine:
- Turn off machine.
- Unplug cord from outlet.

1) Do not operate machine:
- Unless trained and authorized
- Unless you have read and
understand operators manual
- In flammable or explosive areas.
- With damaged cord or plug.
- If not in proper operating condition.
- In outdoor areas.
- In standing water.

5) When servicing machine:
- Unplug cord from outlet.
- Use manufacturer supplied or
approved replacement parts.

4

HANDLE ASSEMBLY
HANDLE ASSEMBLY INSTRUCTIONS

Figure 4

Figure 1

Figure 2

Figure 3
Attaching Handle
1] Remove handle from ship position and remove upper handle mounting screws
from machine (Figure 1).
2] Realign handle as shown and replace screws & washers (Figure 2).
3] Attach rear hose dump clamp (Figure 3).
4] Attach front mount squeegee (Figure 4).

5

Operation of Wet & Dry Vacuum
machine.
* Read operators manual thoroughly prior to
operating or servicing this machine.

* The shovelnose wet –dry vacuum includes
the GV25014”bubble buster” blue nylon foam
suppression bag. This bag must be used in all
wet pick-up applications. Failure to use the bag
will void the warranty on the vacuum motor.

WET PICKUP
1] Remove vacuum head and remove the cloth
or paper filter from vacuum, install the
bubble buster.
2] While vacuum head is removed, check to
make sure that the float shut-off is
unobstructed and fully functional.
3] Replace vacuum head and latch it in place.
4] Connect vacuum hose to inlet on the
machine body.
5] Attach appropriate accessory tool for the
job to be completed.
6] Plug power cord into a grounded outlet.

DRY PICKUP
1] Remove vacuum head and bubble buster,
and be sure the cloth or paper filter is
properly installed.
* Do not operate machine without bag or filter
properly installed.
2] Replace vacuum head and latch it in place.
3] Connect vacuum hose to inlet on the
machine body.
4] Attach appropriate accessory tool for the
job to be completed.
5] Plug power cord into a grounded outlet.

* Do not use an extension cord in conjunction
with the standard power cord.
7] If using the front-mounted squeegee
assembly, be sure that squeegee is attached
to front of machine.
8] If using the front-mounted squeegee
assembly, lower squeegee to the floor by
depressing the top half of the pedal [rear of
the machine] forward with your foot.
9] Turn power switch to “on” position.
10] During wet pickup, the float shut-off will
automatically prevent water from entering
the recovery tank once the recovery tank is
full.

* Do not use an extension cord in conjunction
with the standard power cord.
6] Turn power switch to “on” position.
7] Check the filter bag periodically to see if it is
full. For optimal performance, replace bag
when it is 3/4 full.
DRAINING THE RECOVERY TANK
1] Unplug machine from power outlet.
2] Transport machine to nearest floor drain or
bucket.
3] Remove drain hose from rear of machine.
Remove ball plug from drain hose, and drain
the contents of the tank.
4] After the contents have drained, remove
the vacuum head and rinse recovery tank
with clean water.
5] Replace the ball plug on the drain hose and
hang hose back on the rear of the machine.

* If foam develops in the recovery tank during
wet vacuuming, use de-foamer chemical to
help eliminate the foam. Foam will not activate
the float shut-off, and therefore, may cause
vacuum motor damage.
11] To raise the squeegee assembly back to
transport position, depress the bottom half of
the pedal [rear of the machine] downward with
your foot.

l To prevent odors in the recovery tank,
remove the vacuum head when machine is
not in operation to allow air to circulate.

* Be sure that the handle is properly
assembled on machine body prior to operating

6

MAINTENANCE
To keep the machine performing well for many
years,
please
follow
the
following
maintenance procedures.

* Always confirm that the machine is

unplugged prior to performing any
maintenance or repairs.
1] Drain and rinse recovery tank after each
use.
2] Clean float shut-off after each use.
3] Check bag to see if it is full after each use.
Replace bag when it is 3/4 full.
4] Clean outside of machine with a mild
cleaner.
5] Check power cord for any damage. If any .
6] Clean squeegee blades with a cloth.
* Do not use your fingers to wipe the blades!
7] Check vacuum hose for holes and clogs.
8] Lubricate wheels, casters and axles with a
water resistant lubricant every month.
9] Check machine for loose or missing nuts
and bolts, and replace as necessary.
* After each use in a wet pick-up application,
remove the GV25014 “Bubble Buster” blue
nylon foam suppression bag and rinse it with
clean water. This will aid in preventing any
build-up which can reduce air flow.

STORAGE
1] Unplug machine from power source.
2] Store in upright position in a dry area.
3] Store with squeegee assembly off the
ground.
4] Store with vacuum head off unit so that
tank may breathe.

7

PARTS LIST
SN18WD

8

VACUUM GROUP PARTS LIST FOR SN18WD
DIA
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

PART
NUMBER

DESCRIPTION

GT10004

HANDLE

VF40994

READ MANUAL LABEL

VA21544A

SERIAL TAG

VA20453

DECAL, WARNING

GT10003B

COVER, VAC HEAD

GT13001

ST5 x 12，PH

GT10019

UPPER COVER, MOTOR

GT13004

ST5 x 20，PH

GT13034

ST5 x 50，PH

GT13033

ST5 x 44，PH

VA13470

ST3 x 16，PH

VA21517

CLAMP, BLOCK

VA65001

CABLE，POWER

VA21521

GROMMET,POWER CORD

VA91346

ON/OFF SWITCH

GV15002

MOUNTING COVER, MOTOR

FC25002A

MOUNTING PLATE，MOTOR

VA41032

GASKET, MOTOR

ZD49000A

VAC MOTOR，115V

GV25002

SEAL PLATE

NO
REQ'D
1
1
1
1
1
3
1
1
4
6
2
1
1
1
1
1
1
2
1
1

21 GV15004A

MOUNTING BASE，MOTOR

1

22
23
24
25
26
27
28
29
30

GV15006

GASKET, MOUNTING PLATE

GV25010

FILTER SCREEN

GV25013

WATER GUARD

GV25006

TRUMPET

GV25003

POLE, BALL

VF14090

"O" RING

GV25009

BALL

GV0014

VACUUM FILTER ASSY

GV25014

BUBBLE BUSTER

1
1
1
1
1
1
1
1
1

9

PARTS LIST
SN18WD

10

TANK GROUP PARTS LIST FOR SN18WD
DIA
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42

PART
NUMBER
VF47035A
VA75001
GT13022
VF13474A
VA21595
VA14010
VA14004
VA13483
VA21514
VA21513A
VA85018
VA91342
VF13600
VF13495
VA75005
VA75013
VA85003
VA75006
VA75007
VA85002
VA75008
VA13471
VA85001
VA75009
VV20501
VA85007
VA75010
VA13491
VA85005
VA85004
VA91345-8
VF13516
VA14001
VA75011
VA75012
VA75003
VV60113S
VA75004
VV10011
VA14002
VA75002
VV10113
VA93208A
GV70034
VA20104A

DESCRIPTION
"VIPER" LOGO
TANK
NUT, M5, NYLON INSERT
WASHER
CATCH
SCREW, M5 x 20
SELF-TAPPING SCREW, ST4 x 20
WASHER
GASKET
INTAKE
HOSE ASSEMBLY
3.5" CASTER
WASHER
SCREW, M6 x 16
LEAF SPRING
AXLE
KNOB
MOUNTING PLATE, PICK-UP TOOL
BUMPER
BODY, PICK-UP TOOL 24"
BODY, PICK-UP TOOL 30"
SELF-TAPPING SCREW, ST5 x 10
CLAMP, BLADE, 24"
CLAMP, BLADE, 30"
SCREW, M5 x 14, PH
BLADE, 24"
BLADE, 30"
SCREW, M8 x 25
LOCK
AXLE, WHEEL
WHEEL, 2"
WASHER
LOCK
AXLE, MOUNTING PLATE
PEDAL
AXLE, PEDAL
WASHER
10" WHEEL
CAP, AXLE, WHEEL
SCREW, M10 x 50
HANDLE
CLAMP 2"
DRAIN HOSE
CLAMP, DRAIN HOSE
PLUG DRAIN HOSE

11

NO
REQ'D
2
1
4
6
2
4
4
4
1
1
1
2
10
6
1
1
2
1
2
1
1
2
1
1
6
2
2
2
4
2
2
8
4
1
1
1
2
2
2
6
1
1
1
1
1

ACCESSORIES

12

ROLLER

ACCESSORIES PARTS LIST FOR SN18WD
DIA
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

PART
NUMBER

DESCRIPTION

VA20803

DUSTING TOOL

VA20248

TUBE

VA20209

WAND

GV0040-D

DRY PICK-UP TOOL

GV0040-W

WET PICK-UP TOOL

VA20207-8

RUBBER BLADES, 400mm

VA20207-5A

SEAT, BLADE, 400mm

VA20413

PIN, WHEEL

VA20207-4

SEAT, WHEEL

VA20207-3

CLIP, FLOOR TOOL ADAPTER

VA20207-2

FLOOR TOOL ADAPTER(38mm)

VA20806

CREVICE TOOL

VA20201

MACHINE END

VA20202

THREADED INSERT

VA20203

CLIP RING

VA20206

ANGLED HOSE END, 38mm

VA20288

HOSE ASSY

VA00001

24" FRONT MOUNT SQUEEGEE ASSY

18 VA00002
VA00005

19 VA75020
20 VA75020-1
21 VA20246

30" FRONT MOUNT SQUEEGEE(OPTIONAL)ASSY
24" DRY PICK-UP TOOL ASSY(OPTIONAL)
CLOTH BAG,DUST(OPTIONAL)
CLIP, CLOTH BAG(OPTIONAL)
ROLLER

o

13

NO
REQ'D
1
2
1
1
1
2
2
2
2
1
1
1
1
2
2
1
1
1
1
1
1
1
2

Wiring Diagram
SN18WD
Switch
Black

Blue

White

White

Green

G/Y

SJT 16/3C
Power
Supply
Cord

14

Motor



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23
Create Date                     : 2009:03:23 15:28:14+08:00
Creator Tool                    : pdfFactory Pro www.pdffactory.com
Modify Date                     : 2012:01:12 09:29:48-05:00
Metadata Date                   : 2012:01:12 09:29:48-05:00
Format                          : application/pdf
Creator                         : Jiang
Producer                        : pdfFactory Pro 3.10 (Windows XP Professional Chinese)
Document ID                     : uuid:ef6f4585-9132-4716-a824-4f2e6c9f0b81
Instance ID                     : uuid:86422304-6b00-c440-80ce-6469cbad6573
Has XFA                         : No
Page Count                      : 13
Author                          : Jiang

EXIF Metadata provided by EXIF.tools