Windsor Admiral 8 Carpet Extractor Operator Manual
2016-12-28
: Sweepscrub Windsor-Admiral-8-Carpet-Extractor-Operator-Manual windsor-admiral-8-carpet-extractor-operator-manual 1761 file product_file
Open the PDF directly: View PDF 
.
Page Count: 3
WINDSOR
MAINTENANCE
86372310
01)
Drain and rinse recovery
tank and solution tank.
05)
Vent the recovery tank to let
dry.
04)
Store brush in the recov-
ery tank bearing side up.
02) Clean brush, brush hous-
ing, and vacuum shoe.
06)
Remove spray jets and soak
in a solution of hot water
and vinegar overnight.
03) INSPECT BRUSH:
When the
black brush bristles reach the
height of the yellow indicator
bristles replace the brush.
AdmirAl 8
WINDSOR
MAINTENANCE
00000000
WINDSOR
OPERATION
86372310
01)
Install jets and brush.
05) Adjust the handle to a
comfortable position.
04)
FOR SPOTTING: hook up
vacuum line and solution
line if necessary.
02)
Remove recovery tank and
ll solution tank with ex-
traction rinse or fresh water.
Replace recovery tank.
06) Turn the brush motor on.
03)
Make sure that all three prongs are on the
main body of the provided cord. If one of
the prongs is missing, notify your supervi-
sor. Plug into outlet and control panel and
twist to lock.
07)
Adjust the brush height dial
setting by setting until you
hear the pitch of the motor
change.
AdmirAl 8
WINDSOR
MAINTENANCE
00000000
WINDSOR
OPERATION
86372310
08)
Turn vacuum motor on.
11) Unplug the cord from the
wall and the machine
when nished.
09)
Choose continuous or inter-
mittent spray. Press buttons
on handle to control spray on
intermittent mode.
10) Overlap 2-3” on every pass
and on intermittent spray
release button and continue
pulling for 1 foot before mak-
ing a new pass.
AdmirAl 8
