Swift IoT Tech ST02 Smart Tag User Manual Users manual

Swift IoT Tech (Shenzhen) Co., LTD. Smart Tag Users manual

Users manual

Download: Swift IoT Tech ST02 Smart Tag User Manual Users manual
Mirror Download [FCC.gov]Swift IoT Tech ST02 Smart Tag User Manual Users manual
Document ID3657741
Application ID+o+9x07Q3KXke5a/grodhQ==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize33.68kB (421045 bits)
Date Submitted2017-11-29 00:00:00
Date Available2017-11-29 00:00:00
Creation Date2017-11-27 03:23:32
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2017-11-27 03:23:32
Document TitleUsers manual
Document CreatorMicrosoft® Office Word 2007
Document Author: Tina Tina

Quick Start Guide
Smart Tag
ST02
Setting Up the App
1. Download the SwiftFinder app from the Apple
App Store or the Google Play Store
2. Make sure your Bluetooth on the phone is on
3. Open the SwiftFinder app
4. Follow the prompts to allow SwiftFinder access
to Bluetooth and Location Service so you can
see your things on a map
Removing Battery Insulation Sheet
Your smart tag comes with a battery pre-inserted. Before using the
device, the battery insulation sheet must be removed (Improper removal of
the insulation sheet might end up breaking it, in which case you will need
to open the case and remove scraps of the broken sheet).
Attaching Your Smart Tags to Things
It can be anything that you want to track, like keys, bags, purses, etc.
Linking Your Smart Tags to the App
1. Tap the + button on the Things tab of the app
2. Wait for the app to discover and connect the smart tag
3. Tap the save button on upper right corner
of the app
4. Optionally you can take a picture of the
thing that the smart tag is attached to
and name it
5. Be happy because now you can always find
your stuff!
Replacing Battery
The pre-inserted CR2032 button cell battery is user replaceable. In
case your smart tag runs out of power, please follow the following
instructions to replace the battery.
1. Open the case from the corner as shown in
the image illustrated
2. Remove old battery and insert new battery
with + sign facing up
3. Close the case
Support
For technical support, advanced features, and usage tips, please send
email to: cs@swiftfinder.net
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Anychanges or modifications not expressly approved by the party
responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for aClass B digital device, pursuant to Part 15 of the FCC Rules.
These limits aredesigned to provide reasonable protection against harmful
interference in aresidential installation. This equipment generates, uses
and can radiate radiofrequency energy and, if not installed and used in
accordance with theinstructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user
isencouraged to try to correct the interference by one or more of the
followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requiremen
t. The device can be used in portable
exposure condition without restriction.
FCC ID: 2AMMQ- ST02

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : Tina Tina
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2017:11:27 03:23:32
Modify Date                     : 2017:11:27 03:23:32
Producer                        : Microsoft® Office Word 2007
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AMMQ-ST02

Navigation menu