SWITCHMATE HOME SM003 Switchmate User Manual 15 TSM003 UserMan

Switchmate Home, LLC Switchmate 15 TSM003 UserMan

15_TSM003 UserMan

Finally, smart lightingmade easyInstall two AA batteries into the back of SwitchmateLaunch the App and walk through the simple installationDownload the free Switchmate App from the Google Play or Apple App store onto your phoneAndroid 4.4+Compatibility:iPhone 5 and above/iOS 8.0+132InstallationSnap Switchmate with the “top” sticker facing up - over your light switch with the light switch and the Switchmate inthe “up/sTOP position”4Q:  I am having trouble getting my    smartphone to connect to my   SwitchmateA:  Different phones may behave    differently when connecting to    Switchmate. When experiencing   difficulties, TURN OFF WIFI then    try the following steps:  1.  Close the Switchmate App and    restart the App – try to connect  2  Turn Bluetooth off then on –     try to connect  3.  Restart Smartphone – try to   connect  4.  Reset Switchmate by taking the    batteries out and put them back    in – try to connect  5.  Uninstall the App and download    it again.TroubleshootingFor further troubleshooting please contact us at: www.SwitchmateHome.com/supportONONononononononQSG 2017 AprilDesigned in CaliforniaSwitchmate Bright*Remove “TOP”    sticker once   installedTOPON
Switchmate Home, LLCModel: TSM003FCC ID: 2AICR-SM003FCC WarningThis  device  complies  with  part 15 of the FCC Rules .Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)  his device must accept any interference received,  including interference that may cause undesired operation.NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The equipment has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction. IC WarningThis  device  complies  with  Industry  Canada  license-exempt RSS  standard(s).  Operation  is  subject  to  the  following  two conditions:  (1)  This  device  may  not  cause  harmful  interference, and  (2)  this  device  must  accept  any  interference,  including interference that may cause undesired operation of the device.Avis d’Industrie CanadaLe présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorisée aux deux conditions suivantes: 1) I'appareil ne doit pas produire de brouillage; et 2) I'utillsateur de I'appareil doit accepter brouillage radio électrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil.Switchmate ®

Navigation menu