Sylvania 6240VE User Manual VCR Manuals And Guides L0520738

SYLVANIA VCR Manual L0520738 SYLVANIA VCR Owner's Manual, SYLVANIA VCR installation guides

User Manual: Sylvania 6240VE 6240VE SYLVANIA VCR - Manuals and Guides View the owners manual for your SYLVANIA VCR #6240VE. Home:Electronics Parts:Sylvania Parts:Sylvania VCR Manual

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

SYLVANIA
Owner's

Video

i,yeo
need
addi ope
al aO
aeeie*ance
afteri
reading

ManNam

Cassette

this owner's
r_sories,

manual

or to order
pleasecall

replace'

TOLL
FREE:1-8'0o-ese-z42e
IIIli• 3)

Recorder

or visit our web site at http://www.funaFcorp.com

4)
"

1. Before using your VCR
Cable
Signal
= or
"!""-',,1'""_,,,,,_

(Back

A_na
[1

Hint

mfcharmed
3 is already
occupied
for broadcasting,
II • 1) Set your TV to channel 4 .............................
II " 2) Insert a pre-recorded tape into the VCR.

,,,,,,,,
. The RF output channel may
not change when you adjust
Press the PLAY button once.
tracking during playback. In
After a few seconds, press the PLAY button on the VCR for 3 seconds,
this case, stop the playback,
The RF output channel will change to channel 4 from channel 3 and you will
and start the playback again.
see a playback picture.
After that, press the PLAY button on the VCR for 3 seconds
When a picture does not appear on the TV screen, repeat step [4].
again.
Press the STOP button to stop playback.

You can use the AUDIO OUT jack and
VIDEO OUT iack on the back of the
VCR if your TV has AudioNideo Input
iacks. In this case, you need to set the
TV to external Line Input Mode. Please
refer to your TV's owner's manual.

=_Back of VCR)

(Back

of TV

(not sup?lied)

(Back of VCR)

(Back of TV)

RF Cable

Plug the AC power

(supplied)

cords of the VCR and TV into the AC outlets.

AUDIO OUT jack
Connect the audio cable to the audio in jack
efacamcorder,
anotherVCR,
asteree

amplifier, or an audio system,

[8'1

_Ul__

i
•
Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot
be changed on the VCR. Youcan view or record ONLY the
channels you have selected on the cable box or the satellite
box.
• While you are recording, only the recorded channel can
be viewed.
To select channels of the cable box or satellite box

i Select this connection when you want to change channels
i on the VCR. With this connection, you may watch one
:"channel while recording another.
i •You may not view or record a scrambled channel.

.: To select channels of the cable box or satellite box
i 1)At the cable box or satellite box, select channel 3 or 4
:" (the same channel as the VCR's RF output channel.)
1)Turn on the VCR by pressing the POWER button, and i • Refer to "RF Output Channel".
i 2)At the TV, select the same channel as the output chain
then, press the VCR/TV button.The POWER and the
nel (3 or 4) of the cable box or satellite box.
VCR/TV indicators on the front panel will light on. Then,
press the CHANNEL buttons to select channel 3 or 4
i 3)Turn on the VCR by pressing the POWER button, and
:"
then,
press the VCR/TV button .The POWER and
(the same channel as the output channel d the cable
box or satellite box).
i VCR/TV indicators on the front panel will light on. Then,
• If you use the channel 4, you need to change the VCR's i select the channel you want to view or record.
RF output to channel 4. Refer to "RF Output Channel". i To play back a tape
2) At the TV, select channel 3 or 4 (the same channel as i Follow the steps 1) to 2) above. Then, play back a tape.
you have selected at step 1).
_ • Refer to "Playback" on page 5.
3) At the cable box or satellite box, select the channel you i To view one channel while recording another
want to view or record.
! 1)While you are recording on the VCR, press the VCR/TV but*
:" ton so that the VCR/TV indicator disappears on the VCR.
i 2)At the cable box or satellite box, select the channel you
want to view.

f
_ _, d

• Remote control
(NA371UD) with
Two AA batteries

/audiosource.

I._ool
;_

(_o'.

Connect

".*

_tj L,
I_,o_o/

..................

VIDEO OUT jack
Connect the video cable to the video in jack
of a camcorder, another VCR, or a TM

AUDIO IN jack
Connect the audio cable from the audio out
[_jackofacamcerder
anetherVCR
oran

/
/
/
/

• RF Cable
• Owner's Manual
(WPZ0901TM002) (0VMN03900)

your antenna

or cable box.

ANT OUT jack
_
Connect the RF cable (supplied) to
'"__:_--;_theantenna
n Putjackon
YourTV •
VIDEO IN lack
Connect th'e video cable from the video out
jack of a camcerder, anotherVCR
or an
audio-visual source
aser disc player,
vioeo disc 3layer, etc.).

Install two AA batteries

/z'b..

(supplied)

polarity

matching

the

.'-_ .">_

indicated e

the bottom of the
remote control.

-,.4_

Printed in China
0VMN03900/HF310UD

*****

2. mmportant Safeguards
I WARNING:

To
#0 REDUCE
NOT EXPOSE
THERISK
THIS APPLIANCE
OFFIREORELECTRIC
TO RAIN OR
SHOCK,
MOISTURE,

The lightning
flash with arrowhead
syrnbo_, within
an equi_atera_
triangle,
is
intended
to alert the user to the presence
of uninsulated
"dangerous
voltage"
,within the product's
enclosure
that may be of sufficient
magnitude
to constitute
a risk of e_ectrie shock
to persons.
The exclamation
point within an equilatera_
user to the presence
of important
operating
instructions
in the literature
accompanying

1. Read InstructionsAll the safety and operating
instructions should be read before the appliance
is operated.
2. Retain Instructions-The
safety and operating
instructions should be retained for future reference.
3. Heed Warnings- All warnings on the appliance
and in the operating instructions should be
adhered to.
4. Follow InstructionsAll operating and use
instructions should be followed.
5. CleaningUnplug this video product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and, that for some specific
reason, such as the possibility of the loss of an
authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6. AttachmentsDo not use attachments not recommended by the video product manufacturer
as they may cause hazards.
7. Water and Moisture- Do not use this video
product near water, for example, near a bath
tub, wash bowl, kitchen sink or laundry tub in a
wet basement, or near a swimming pool, and
the like.
8. AccessoriesDo not place this video product
on an unstable cart, stand, tripod bracket, or
table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart,
stand, tripod, bracket, or table recommended by

triangle
is intended
and maintenance
the product.

to alert the
(servicing)

12. Power Cord ProtectionPower supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to
cords at plugs, convenience
receptacles,
and
the point where they exit from the appliance.

17. Object and Liquid Entry- Never push objects
of any kind into this video product through any
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the video product.

13. Outdoor Antenna GroundingIf an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical
Code, ANSI/NFPA No. 70 provides information
with regard to proper grounding of the mast and
supporting
structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors,
location of antenna-discharge unit, connection to grounding electrodes,
and requirements
for the grounding electrode.
(Fig. A)
FIGUREA

18. ServicingDo not attempt to service this video
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.

the manufacturer, or sold with the video product.
EXAMFLE
OFANTENNA
GROUNDING
Any mounting of the appliance should follow the
ASPERNATIONAL
ELECTRICAL
CODE
manufacturer's instructions and should use a
mounting accessory recommended by the manufacturer. An appli_0_._EC_RT_A_.B'<_
ance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance
and cart combination to overturn.
_
9, VentilationSlots and openings in the cabinet
are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings
must not be blocked or covered. The openings
should never be blocked by placing the video
product on a bed, sofa rug, or other similar surface. This video product should not be placed in
a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources-This
video product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your appliance dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the
operating instructions.

a. When the power-supply
aged.

cord or plug is dam-

b. If liquid has been spilled, or objects have fallen
into the video product.
c. If the video product has been exposed to rain or
water.
d. If the video product does not operate normally
by following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the video product to its
normal operation.
e. If the video product has been dropped or damaged in any way.

POWER

(NEC

ART

SERVICE

250,

f. When the video product exhibits a distinct
change in performance-this
indicates a need for
service.

GROUNDING

PART

GROUND CLAMP
NEC N_rIONAL ELECTRICAL CODE
$2898A

14, LightningFor added protection for this video
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges.
15. Power Lines- An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep
from touching such power lines or circuits as
contact with them might be fatal.

11. Grounding
or Polarization-This
video product
is equipped with a polarized alternating-current
line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.

19. Damage Requiring Service- Unplug this video
product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:

20. Replacement
Parts- When replacement parts
are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
21. Safety Check- Upon completion of any service
or repairs to this video product, ask the service
technician to perform safety checks to determine
that the video product is in proper operating
condition.
22. Heat- This video product should be situated
away from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.

16, OverloadingDo not overload wall outlets,
extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

-2-

3. Preset for Use
To Select a Channel

-MENUV

You can select a channel by directly
pressing the Number buttons on the
remote control.

on the TV and set
Iilf_ channel 3.

I• If channel 3 is already occupied for broad[ casting, see"RF Output Channel" section.

IPOWER

emote Co_}o

TV Screen

LANGUAGE

SELECT

"\l
'
II

STOP

PLAy

I_,-

[1_

ENGLISH

[ON]

FRANCAIS

Notes
tons:

for using the Number

•

• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press 1,1,7)
• You must precede
single-digit
channel
numbers
with a zero (For
example:
02, 03, 04 and so on).

F_i

III STOP

LAyIb"

AUTO

SET

_" MANUAL

_Please

wait for a few minutes.

After scanning...
, The tuner stops on the lowest memorized
channel.
, You can select only the channels memorized
in VCR by using ttie CHANNEL buttons.
, If "AUTO SET UP" appears on the TV screen
again, check the calSleconnections. Then,
press the F.FWDbutton once again.

• Repeat these steps only.if there was a
power failure or if the VL,R has been
unplugged for more than 30 seconds.

F FWD_

•

MANUAL
STOP

PLAYI_

SET

CHANNEL

MON33TH;L_:::Ty2EAR4

F FWD=*,=

the current month

MONTH

.........
r

DAY

__o_I

MINUTE

CLOCK

Select the channel to be
added or deleted.

YEAR

os / i 5: .....
HOUR

AM/PM

MONTH

DAY

YEAR

looo
HOUR
05

(CATV)

:ADD

CLOOKSET
/

MINUTE
40

_MPM
_MAM
: _
PM

Select "AM" or "PM"

SET

Select the current day

en.

To exit the CLOCK SET

_&!LREW

_ FWD J._

[

MANUAL

SET

]

c°c:MP
t

MONTH
03
/

....

Seect ADD or DELETE

_,:tt;,

If you accidentally select Spanish or French
and need English: Press the MENU button
and choose SELEC. IDIOMA, or SELECTION LANGUE. Press the F.FWDbutton,
and select ENGLISH. Finally, press the
C.RESET/EXlT button.

;

I
3_

.... :ADD

Hint

PLAy.

2) Select "LANGUAGE SELECT" by pressing
the PLAY or STOP button. Then, press the
EFWD button.
3) Select "ENGLISH", "FRANCAIS" or
"ESPANOL" by pressing the PLAY or STOP
button. Then, press the C.RESET/EXlT button.

SET UP

1) Press the MENU button until the main
menu appears.

button to exit

F FWD_

I_I/T,'TOP

To Chanqethe On-ScreenLanquaqe

[• Refer to "Hint for Cable Box or
I Satellite Box"section on page 1.

If the clock is not set, the
_,s=_" CLOCK SET screen
(' ) appears when you press
\_the
MENU button, n th s
case, go to step [2].
F FWD=._

CH 01

Press the MENU

PLAyII_

F FWD =_

2) Select "CHANNEL SET UP" by pressing the
PLAY or STOP button. Then, press the
EFWD button.

................
AUTO SET UP .................

STOP

_or_°
,
•

1) Press the MENU button until the main
menu appears.

3) Select "AUTO SET UP" by pressing the
PLAY or STOP button. Then, press the
EFWD button. After scanning, the tuner
stops on the lowest memorized channel.

-MENUAUTO REPEAT
[OFF]
CHANNEL SET UP
• " CLOCK
TIMER PROGRAMMING
SET
LANGUAGE
SELECT

_.,

but-

To Preset the Channel Aqain

FFWD_

ME_E_NU

TIMER PROGRAMMING
AUTO REPEAT
[OFF]
_- CHANNEL SET UP
CLOCK SET
LANGUAGE
SELECT

HOUR

DAY
15

To exit the

o_s_

:MINUTE

Hin t............................
,,, ,,,,,,,,,
,,,,,,,,
ii i:ii'}

Select the current year
F FWD

YEAR
[2004

• T,To
go back one step, press the REW button

• (during the steps [2] to [7].)
Yourclock setting will be lostif there is a
power failure or if the VCR has been
I unplugged for more than 30 seconds.

menu.
EN

4. Precautions
Install Location
For safety and optimum performance of
,our VCR:
Install the VCR in a horizontal and stable position. Do not place anything
directly on top of the VCR. Do not
place the VCR directly on top of the TV.
Shield it from direct sunlight and keep
away from sources of intense heat.
Avoid dusty or humid places. Avoid
places with insufficient ventilation for
proper heat dissipation. Do not block
the ventilation holes on the sides of th_
VCR. Avoid locations subject to strong
vibration or strong magnetic fields.

Important Copyriqht Information
Unauthorized recording or use of broadcast television programming, video tape,
film or other copyrighted material may
violate applicable copyright laws. We
assume no responsibility for the unauthorized duplication, use, or other acts
which infringe upon the rights of copyright owners.

If you are having problems operating your product even though you have followed
the instructions in this manual, check the following list of problems and corrective
actions. You may be able to solve the problem yourself.
PROBLEM

CORRECTIVE

No power.

• Make sure the power plug is connected
• Make sure the power is turned on.

Timer recording

is impossible.

Cannot go into Recording

A Note about Recyclinq
This product's packaging materials are
recyclable and can be reused. Please
dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away
Avoidthe Hazards of Electrical Shock and or incinerated but disposed of in accorFire
dance with your local regulations conDo not handle the power cord with wet cerning chemical wastes.
hands.
Note to the Cable TV System Installer
Do not pull on the power cord when
disconnecting it from AC wall outlet.
This reminder is provided to call the
Grasp it by the plug.
Cable TV system installer's attention to
Article 820-40 of the National Electrical
Moisture Condensation Warninq
Code, which provides guidelines for
Moisture condensation may occur inside proper grounding - in particular, specifythe unit when it is moved from a cold
ing that the cable ground shall be conplace to a warm place, or after heating a nected to the grounding system of the
cold room or under conditions of high
building, as close to the point of cable
humidity. Do not use the VCR at least for entry as possible.
2 hours until its inside is dry.
CAUTION:
FCCWarninq
TO PREVENT ELECTRIC SHOCK,
This equipment may generate or use
MATCH WIDE BLADE OF PLUG TO
radio frequency energy. Changes or
WIDE SLOT, FULLY INSERT.
modifications to this equipment may
ATTENTION:
cause harmful interference unless the
POUR I_VlTER LES CHOC
modifications are expressly approved in
I_LECTRIQUES, INTRODUlRE LA
the instruction manual. The user could
LAME LA PLUS LARGE DE LA
Eosethe authority to operate this equipFICHE DANS LA BORNE CORREment if an unauthorized change or modi- SPONDANTE DE LA PRISE ET
fication is made.
POUSSER JUSQU'AU FOND.

mode.

ACTION
to an AC outlet.

• Make sure the timer recording is set correctly.
• Make sure the power is off.
• Make sure the VCR clock is set correctly.
• Make sure the tape has a record tab. If needed,
cellophane tape.

cover the hole with

Playback picture is partially noisy.

• Adjust tracking control for a better picture by pressing the CHANNEL
buttons.

No playback picture (only sound
can be heard.)

• Head cleaning may be necessary. Refer to "Auto Head Cleaning"
page 8.
• Make sure the VCR is not in the Menu mode.

No or poor playback picture.

• Turn on the TV and set the TV to channel 3. If channel 3 is already
occupied for broadcasting, change the RF output to channel 4, and
change the TV channel to channel 4. (See RF Output Channel" on
page 1 for the detail.)
• Fine tune the channel reception on your TV.

TV programs
really.

• Re-check the ANT. IN and ANT. OUT connections. See page 1.
• Press the VCR/TV button on the remote control so that the VCR/TV
indicator on the VCR disappears.

cannot be seen nor-

No VCR operation from the
infrared Remote Control.

• Make sure the power plug is connected
• Check batteries in remote control.

Video or color fades in and out when • You cannot copy a copyrighted
making a copy of a video tape.
guard protection.

Video Heads :
Operating

temperature

Converter

output :

Four Heads
: 41°F-104°F
(5°C~40°C)
VHF Channel 3 or 4.

to an AC outlet.

video tape. You are experiencing

copy

Power requirement : 120V, 60Hz
Power consumption : 14 Watts
Dimensions :
W 14-3/16" (360mm)
H 3_5/8" (92ram)
D 8-9/16" (216mm)
Weight :
4.0 Ibs. (1.8 Kg.)
(approx.)

• Designs and specifications are subject to change without notice and legal obligation.
• If an explanation in the Owner's Manual is not consistent across languages, please
refer to the English version.
4

5. Playback

7. Other Operations

Before:
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupiedfor broadcasting,see "RF Output Channel"section.

To cue or review picture during playback (Picture Search)
Press the F.FWD or REW button.
• Press it again and the VCR will now
search in super high speed. (in the
LP/SLP modes only)

To play back in slow motion
Press the SLOW button during playback
or the still mode.
• If the noise bar appears on the TV
screen, you can reduce it by pressing
the CHANNEL buttons.

To freeze the picture on TV screen
durinq playback (Still mode)
Press the PAUSE/STILL button. Each
time you press the button, the picture will
be forwarded by one frame.
• If the picture begins to vibrate vertically
during the still mode, stabilize the picture by pressing the CHANNEL buttons.
• If the picture is distorted or rolling vertically, adjust the vertical hold control on
your TV, if equipped.
Counter Reset
Press the C.RESET/EXIT button.

To temporarily
stop recording
(Pause mode)
Press the PAUSE/STILL button.
• During the rec pause mode, five I
marks appear on the TV screen. Each |
mark represents one minute.
• Press it again to resume recording.

01::_

o4>
OOOO

/PLA "

..........
'`
V

_,/sToP
\

......
0%, ix

/
x\

_,,

6. Recording & OTR (One Touch Recording)
Before:
Turn on the TV and set it to
channel 3.
• If channel3 is alreadyoccupiedfor
F_q
broadcasting,see "RF OutputChannel"section.

I. Toreturnto playbackfromthePictureSearch/Still/Slow
mode,pressthe PLAYbutton.

8. On-Screen
2

_//
_o

[ SP

///To

c.t2]_

call up the main

_'_

speed

IO Fl

[]

2///To

select

'_'•/REO

You can select a fixed recording time by pressing the REC/OTR button repeatedly•

Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its record tab. To record
on it later, cover the ho!e with cellophane
tape.

-MENUj_

._1_-

::
_

_j/To
Record

tab

an item

_or_

........

CLOCK SET
LANGUAGE
SELECT

.ST_

4_,

PROGRAMMING
t I_- TIMER "MENU"

Oeeiredchannel
g ...... _8
' Selectthedesiredtape

Operations

ooo,=

.......
:

When a tape reaches its end during playback, fast-forward, or recording (except
timer recording and One Touch
Recording), the tape will automatically
rewind to the beginning. After rewinding
finishes, the VCR will eject the tape and
turn itself to off.

oHi_li_J_Pausemodewillbeautomatically
cancelledafter5 minutesto preventdamageto thetapeandthe

s s@

Auto Rewind

[]

TIMER PROGRAMMING
AUTO REPEAT
[OFF]
I_- CHANNEL SET UP
LANGUAGE
SELECT
CLOCK SET

decide

_"_

CHANNEL

SET UP

Od_b

AUTO SET UP
7
'_'\ i_%

I_ MANUAL

,4C:)

STOP _
E_ex-EeT-"
....ii 6ST{_TO_
y .....IE

_-_T°

-5-

SE_#.

OOOO

SET UP

exit the menu

_,,,,
\\

OR
"\

[]

9. Recording

Features

,,Insert a tape with its record tab into the VCR.
the desired
our)

_- TIMER PROGRAMMING
AUTO REPEAT
[OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE
SELECT
__

• If there is a power failure or the VCR has been unplugged for more than 30 sec-

mSlOP

PLAY_

the clock setting and all timer settings will be lost.
rONET,MEPROGRAM
lli • onds,
If the tape runs out before the end time, the VCR will switch to the Stop mode

19/

start

PROGRAM

PROGRAM
DATE

NUMBER
O 5 / O 3 4 MO_

t_°'_
(_

-MENU-

or (_

START
END

wo_.

TIME
TIME

REC

SPEED

indicator will flash.
R22RAMNOI o2t%%N

• If a tape is not in the VCR or does not have the record tab, the TIMER indicator
flashes and timer recording cannot be performed. Please insert a recordable tape.
• When all the Timer Recording are completed, the TIMER indicator flashes,
_[
SP___I.SLP
REC SPEED
SB
I_
__"
To play or eject the recorded tape, press the POWER button first, and then
SelectthedesiredrecordingspeedI -" press the PLAY or EJECT button.
sTADRT T'ME
CHANNEL

CHANNEL
--

F FWD _

immediately, eject the tape and the VCR power will be turned off. The TIMER

,sTop

ONE TIME

O 7 :: _ _
t 6

PM /

Select the
minute

_
•

To cancel

a Timer

Recording

Press the STOP/EJECT
I PROGRAM
DATE
.STOP=

PLAY_

NUMBER
/

STADRT TIIMM_ __::

CHANNEL

/_fTurn
....

Hin:t
UP

pLAy

IRS_
NUMBER

_'_

PROGRAM
DATE

NUMBER
05/03

END
TIME
STARTTIME

MON

Select"AM"or "PM"

epeat the procedure in steps
5 and 6 to set the end time.

F FWD _,_

F FWD_

the desired
'

_,vo_

TIME

END

TIME

REC

month

PROGRAM

DATE
START

0 5 rj
-2
:

SPEED

_elect the desired

day

aSlOe

PLAy_

_or

_,_A_ •Youcan programone
,
year inadvance.
FFWD_

(Back of Recording VCR*)

@ OUT

F FWD _.

3elect"ONCE","DAILY"
(Men-Fr0,or "WEEKW"

ONE TIME

(Back of Playing VCR)

video

tapes
(Back of TV)

_n_TO,p
1

I
I

[" ONE
P

IISTO

LAy I,-

END
or

TIME PROGRAM

PROGRAM
DATE

NUMBER
05/03

TIME

1
MON

08:30

07:30

CHANNEL
STARTTIME

_-'_ Selectthedesiredchannel
• If you haveconnectedtheVCR to a cable
boxor satellitebox asthe ConnectionA
onpage1, selecttheVCR to channel3 or
4 (the RFoutputchannelofthe VCR).
Then,select thedesiredchannelat the
cableboxor satellitebox.Leavethe cable
boxor satellitebox on for timerrecording.
F FWD_*.

_"_O UT

To Check, Correct, or Cancel a
Timer Program

__:__
L_
O7:30;PM

I"'..... _,)_l --'PMjI

ONCE
DAI_
WEEN_

p_¥_

recordings
of copyrighted
of copyright
laws.

/°NET'MEPR°GRAM
11
lIST

Select

::: ::

Warning:
Unauthorized
may be an infringement

•To gobackonestep,presstheREWbutton
(duringthesteps[3] to [9].)

F FWD _

ms/oP

on the VCR.

off the VCR _°.2w._;

or recording
o_,_--_
•TIMERindicatorontheVCRlightsup.

F FWD_,_

number

that is in progress

- -

PROGRAM

button

1) Turn the power on by pressing
the POWER button.
2) Select main menu by pressing
the MENU button.
3) Select "TIMER PROGRAMMING" by pressing the PLAY or
STOP button. Then, press the
RFWD button.
4) Select the program number
which you want to check by
pressing the PLAY or STOP button. The details of the program
you selected will appear on the
TV screen.
• Go to the digit you want to
change by pressing the RFWD
or REW button.Then, enter correct numbers by pressing the
PLAY or STOP button.
• You may cancel the entire program by pressing the REW button while the program number
flashes.
5) Press the C.RESET/EXIT button
to exit.
6) Press the POWER button to
return to timer stand-by mode.

_/
AudioNideo CaMes
(notsupplied)

RF Cable
(supplied)

*Front input jacks are also available

1) Insert a pre-recorded tape into the playing VCR.
2) Insert a tape with its record tab into the recording VCR.
3) Press the SPEED button on the remote control of the recording VCR
to select the desired recording speed (SP/SLP).
4) Select the "LI" or "L2"position on the recording VCR.
• To use the input jacks on the back of the VCR, select "L1" position by
pressing [0], [0], [1] on the remote control or the CHANNEL buttons.
• To use the input jacks on the front of the VCR, select "L2" position by
pressing [0], [0], [2] on the remote control or the CHANNEL buttons.
5) Press the REC/OTR button on the recording VCR.
6) Begin playback of the tape in the playing VCR.
7) To stop recording, press the STOP/EJECT button on the recording
VCR, then stop playback of the tape in the playing VCR.

Hint

..........................................................

• Forbestresultsduringdubbing,usetheVCR'sfrontpanelcontrolswheneverpossible.
The
remotecontrolmightaffectthe playingVCR'soperation.
• Alwaysusevideo-qualityshieldedcableswithRCA-typeconnectors.
Standardaudiocablesare
notrecommended.
• Youcan usea videodiscplayer,satellitereceiver,or otheraudio/videocomponent
withAN outputsinplaceof theplayingVCR.
• "LI" or "L2"is foundbeforethelowestmemorized
channel.(Example:
CH02)
EN

t0. Special

Features

You can specify the time for
fast forwarding or rewinding.

You can specify the number of
programs to be skipped.

You can repeat playback of a
whole tape automatically.

,, Insert a tape into the VCR.

• Insert a tape into the VCR.
/_

.......
,.

-MENUi_ AUTO REPEAT
[OFF]
CHANNEL SET UP
TIMER PROGRAMMING
CLOCK
SET
LANGUAGE
SELECT

.......
_

[ xl

STOP

PLAY_-

(Once)

[ X2 (Twice)

o, lq

Select the desired length
of time for fast forwarding
or rewinding

, To
......

CURRENTPROGRAM

01 ~ 20

TIMER PROGRAMMING
AUTO REPEAT
[ON]
CHANNELSETUP
CLOCK SET
LANGUAGESELECT
-MENU-

02
02

0:01 ~ 9:59
(1 minute-9
hours
and 59 minutes)

13/To

rewind
_REW

DEX

03
MAR_'_IK "_1

i To fast forward
i

IAOTO E/ EA'"

FFWD_

Hicnantc_i
............................................
u,o Repeat,
[1]-[2]::::::::::::
follow
""" steps
;;
T0oREW
rewind

ToF FWD_
fast forward
After

After searching,

searching,

above, Then, press the F,FWD button so
that [OFF] appears beside AUTO REPEAT.
I Press the C.RESET/EXlT button to exit.
• If menu remains on the TV screen at step
I [3], press the C.RESET/EXlT button to exit.

ly rP A " 1 1
The VCR records an index mark at the
beginning of the recording when you make
a recording. There should be time gap
[ between index marks for the Index Search.

Hint

for Timer

& Index

I These functions are not available during recording.
I • Press the STOP button to stop the search.
• If the end of the tape is reached during a Search, the VCR will cancel the search and rewind the
ape.

-7-

11. information
Funai Corporation
will exchange
is option, in the event of defect
ship as follows:
EXCHANGE
1-90

DAYS:

or repair this product, al
in materials
or worKman-

DURATION:
FUNAI CORPORATIOh
for a new unit withou[

wJJJ excnange
charge for a De n-

od of ninety (90) days from
original
retail purcnase.
91-365

DAYS:

FUNAI

CORPORATION

for a factory-ser\
unit for a charge

the date

will

excnange

ce-io-new-eonaliion
of a retallel3 price

unit

for the period of ninety one (91) days io
three hundred
sixty five (365) days from
me date 3f orlglaal
retail 3urcnase.
REPAIR

DURATION:

LABOR:

FUNAI

CORPORATION

provide

labor without charge for a period o]
ninety (90) days from the date of original rata
Durcnase.
PARTS:

FUNAI CORPORATION
will provide
paris Io replace defective
earls wlinoui
charge for a period of one 1 year from
the date of original retail 3urcnase.
Certair
BaRs are excluded from tnl2
warranly

LIMITS

AND

OR OTHER PROOF OF ORIGINAL
RETAIL PURCHASE
WILL BE REQUIRED
TOGETHER
WITH THE PRODUCT TO OBTAIN EXCHANGE
OR SERVICE
UNDER

THIS WARRANT_

This

warranty

shall

not De extended

s voJa and of no effect

Ders on the proaucI

FUNAI

CORPORATION

are alierec

to any oiner
if any serial

replaced,

person
num-

defaced

missing.This
SYLVANIA
Limited warranty
applies only to
proauci purchased
and used in the United States.

damage

WhiCh occurs

in salDmen[,

or failures

DAMAGES
ARISING
OUT OF OR OCCASIONED
THE USE OF OR THE INABILITY
TO USE THIS

BY
PROD-

UCT THIS WARRANTY
OTHER WARRANTIES

Jse of this proauci,
flood,

llgninmg

misuse, abuse, mishandling,
misfaulty ]nsiallauon.
improper mainuse sucn as noieL rental or office
or damage

or other

INSPECTIONS

AND

REPAIRS

BE PERFORMED
BY A FUNAI AUTHORIZED
TER, THIS WARRANTY
IS VALID WHEN THE
UCT IS DELIVERED
PREPAID
RIZED SERVICE
FACILIT_

TO A FUNAI

wnlcn

resulis

from

fire

Auto Head Cmeaning

Should your VCR become inoperative, do not
try to correct the problem by yourself. There
are no user-serviceable parts inside. Turn off,
unplug the power plug, and please call our
help line mentioned on page 1 to locate an
Authorized Service Center.

Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt
accumulated on the video heads after long periods of use, or the usage of rental or worn tapes
can cause this problem. If a streaky or snowy picture appears during playback, the video heads in
your VCR may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the

Cmeaning

Wipe the front panel and other exterior surfaces of the VCR with a soft cloth immersed
m lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
insecticide liquid near the VCR. Such chemicals may cause damage and discoloration to
the exposed surfaces.

CLAIMED
BY FUNAI CORPORATION
AND ITS REPRESENTATIVES
OR AGENTS
IN THE UNITED
STATES
ALL WARRANTY

Servicing

Cabinet

IS MADE IN LIEU OF ALL
INCLUDING
THE WARRANTY

OF MERCHANT
ABILITY,
AND FITNESS
FOR A PARTICULAR
PURPOSE.
THAT ARE HEREBY DIS-

MUST
CENPROD-

AUTHO-

problem, please call our help line mentioned on
page 1 to locate an Authorized Service Center.
NOTES:
Remember to read the instructions included with
the video head cleaner before use.
Clean video heads only when problems occur.

IMPORTANT:
THIS LIMITED WARRANTY
LEGAL RIGHTS
YOU MAY

GIVES YOU SPECIFIC
HAVE OTHER RIGHTS

PREPARACION

INC.

SERVICE CENTER
Vail

Ness

Avenue

Torrance.

90501

Tel :1-800-968-3429
http://www.funai-corp,com
Head Office: 100 North Street Teterboro. NJ 07608
PLEASE
DO NOT SHIPYOUR
UNITTOTHE
TETERBORO

pot

NOTES: Cuando utilice su nueva
videograbadora por primera vez, oen el
case de ser necesario despu6s de producirse un fallo en la alimentaci6n, la
videograbadora se pondrA inicialmente en e!
mode de prea]uste cuando se pulse
[POWER].
1. Encienda el televisor y ponga el televisor
en el canal 3=
2. Pulse [POWER] pard encender la
videograbadora.
3. Seleccione "ENGLISH",
"FRANCAIS"(French)
o "ES PAKIOL"
seLec.IDIOMA
(Spanish) pulsando
ENGUSH
[PLAY] o [STOP]. Y
FRANCAIS
luego pulse [RFWD].
_- ESPANOL [ON]
4. Pulse una vez
[RFWD].
El sintonizador explora
y memoriza todos los canales activos de su
zona. Tras la exploraci6n, el sintonizador se
detiene en el canal memorizado m_s baio.

ATTENTION:
FUNAI CORPORATION RESERVES THE
RIGHT TO MODIFY ANY DESIGN OF THIS
PRODUCT WITHOUT PRIOR NOTICE.
For information about your product, or for
information on how to exchange or repair your
product, telephone or write to the following:
FUNAI CORPORATION,

PREPARACION DEL RELOJ

DE CANALES

(La antena o la caja de televisi6n
cable debera estar conectada_

TO OBTAIN SATISFACTION
WITH THE EXCHANGE
OR REPAIR OF THIS PRODUCT.
PLEASE
CONTACT
EUNAI CORPORATION

19900

tJnlcn are caused by repairs, alterauons
or Earls not
supplied
b} FUNAI CORPORATION.
or damage wnlcn
results from acclaenL
application,
alteration,
ienance
commercial

ITS REPRESENTATIVES
FOR

This Broduct Is produced
for home use and this warranty
_n]_ covers failures due to defects in matenal or WORKmanshJu, which occur during normal use. It does not
cover

AND

OR AGENTS
SHALL IN NO EVENT BE LIABLE
ANY GENERAL.
INDIRECT
OR CONSEQUENTIAL

THAT VARY FROM STATE TO STATE
IF AT ANY TIME
DURING THE WARRANTY
PERIOD YOU ARE UNABLE

EXCLUSIONS:

THIS WARRANTY
IS EXTENDED
ONLY TO THE ORIGENAL RETAIL PURCHASER,
A PURCHASE
RECEIPT

This warrant,
_r transferee.

THIS WARRANTY
DOES NOT COVER PACKING
MATERIALS.
ANY ACCESSORIES
[EXCEPT
REMOTE
CONTROL
UNITS ,, ANY COSMETIC
PARTS COMPLETE ASSEMBLY
PARTS. DEMONSTRATION
OR
FLOOR MODELS.

ADDRESS.

acts of God,

-8-

f= Pulse [MENU] hasta que aparezca

menu principal. (Si el re% no estA puesto
en hera y se pulsa [MENU], el menu
AJUSTE

DE RELOJ aparece en primer

lugar. En este case, siga el paso 3.)
2. Pulse [PLAY] o [STOP] para indicar a
"AJUSTE DE RELOJ". Luego, pulse [RFWD].
3.
i_;[A_io[_-i_]:
Luego, pulse [F.FWD].
Pulse repetidamente [PLAY] o [STOP]
Luego, pulse IF FWD]
Luego, pulse [F.FWD].
Luego, pulse [F.FWD].
Luego, pulse IF FWD]

cionamiento

e! reloj.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 8
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Thu Apr 05 00:57:33 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Sylvania 6240VE User Manual VCR Manuals And Guides L0520738

SYLVANIA VCR Manual L0520738 SYLVANIA VCR Owner's Manual, SYLVANIA VCR installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation