Sylvania 6260VE User Manual VCR Manuals And Guides L0530747
SYLVANIA VCR Manual L0530747 SYLVANIA VCR Owner's Manual, SYLVANIA VCR installation guides
User Manual: Sylvania 6260VE 6260VE SYLVANIA VCR - Manuals and Guides View the owners manual for your SYLVANIA VCR #6260VE. Home:Electronics Parts:Sylvania Parts:Sylvania VCR Manual
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
SYLVANIA
Owner's
Manuam
Video Cassette
Recorder
If you need additional
operating
assistance
after
reading this owner's
manual or to order replacement accessories,
please call
TOLL FREE : 1-800-968-3429
or visit our web site at
http://www.SylvaniaConsu
met Electronics.corn
1. Before using your VCR
(Back
of VCR}
If channel 3 is already occupied for broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into the VCR.
3) Press the PLAY button once.
• 4) After a few seconds, press the PLAY button on the VCR for 3 seconds.
• • The RF output channel will change to channel 4 from channel 3 and you
will see a playback picture.
• • When a picture does not appear on the TV screen, repeat step [4].
change when you adjust tracking during playback. In this case,
stop the playback, and start the
After that,
press
o playbackagain.
he RF output channel
may
not
the PLAY button on the VCR for
3 seconds again.
You can use the AUDIO OUT jacks and
VIDEO OUT jack on the back of the
VCR if your TV has AudioNideo Input
jacks. In this case, you need to set the
TV to external Line Input Mode. Please
refer to your TV's owner's manual.
(Back of VCR)
(Back of TV)
RF Cable (supplied)
Plug
the AC
power
cords
of the VCR
and
TV
into the
AC outlets.
AUDIO OUT jacks
Connect the audio cables to the audio in
acks of a camcorder, another VCR, a stereo
_
/
amplifier, or an audio system.
r_,}
_mll
lll=q'
I
AUDIO IN jacks
Connect the audio cables from the audio
[_out
acks of a camcorder
another VCR or
i II
4
/an
_j_f_m
/NL
I
Select this connection when you want to change channels
on the VCR. With this connection, you may watch one
channel while recording another.
• You may not view or record a scrambled channel.
To select channels of the cable box
1) At the cable box, select channel 3 or 4 (the same
channel as the VCR's RF output channel.)
• Refer to "RF Output Channel".
1) Turn on the VCR by pressing the POWER button, and
2)
At the TV, select the same channel as the output chanthen, press the VCR/TV button.The POWER and the
nel (3 or 4) of the cable box.
VCR/TV indicators on the front panel will light on.
Then, press the CHANNEL buttons to select channel 3 3) Turn on the VCR by pressing the POWER button, then
press the VCR/TV button. The POWER and VCR/TV
or 4 (the same channel as the output channel of the
indicators on the front panel will light on. Then, select
cable box or satellite box).
the channel you want to view or record.
• If you use the channel 4, you need to change the
VCR's RF output to channel 4. Refer to "RF Output
i To play back a tape
Channel".
Follow the steps 1) to 2) above. Then, play back a tape.
2) At the TV, select channel 3 or 4 (the same channel as
• Refer to "Playback" on page 5.
you have selected at step 1).
To view one channel while recording another
3) At the cable box or satellite box, select the channel you 1) While you are recording on the VCR, press the VCR/TV
want to view or record.
button so that the VCR/TV indicator disappears on the
VCR.
2) At the cable box, select the channel you want to view.
VIDEO OUT jack
Connect the video cable to the video in jack /
of a camcorder, another VCR, or a TV.
_ _Connect
_the
I
I
IN jack
your antenna or cabb box.
thJe RF cable (supplied)to
antenna input jack on your TV.
VIDEO IN lack
Connect th'e video cable from the video oul
jack of a camcorder
another VCR. or ar
8--
• Remote control
(NA371UD /
NA375UD) with
Two AA batteries
ANT
_£_Connect
[};/
'_°_
Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot
be changed on the VCR. You can view or record ONLY the
channels you have selected on the cable box or the satellite
box.
• While you are recording, only the recorded channel
can be viewed.
To select channels of the cable box or satellite box
audiosource.
audio-visua
sourceelc.L
(laser disc player,
video disc player,
• RF Cable
• Owner's Manual
(WPZ0901TM002) (0VMN03901)
Install two AA batteries
(supplied) matching the
"'/_--'b_
J_
polarity indicated o
the bottom of the
remote control.
Printed in China
0VMN03901
/HF410UD,
HJ410UD
****
2. mmportant Safeguards
WARNING:
To NOT
DO
REDUCE
EXPOSE
TNER
TH_S
SKAPPUANCE
OFRREORELECTR=C
TO RAiN ORSNOOK,
MOISTURE,
I
I
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL,
The
¢auf_iolll
_atking
is
leeal;ed
on
_the
i'ea_t
o4 _the
I
cabifle_,
The %htning
flash with arrowhead
symbol,
within an equilateral
triangle,
is
intended
to alert the user to the presence
of uninsulated
"dangerous
vokage"
,within the product's
enclosure
that may be of sufficient
magnitude
to constitute
a risk of e_ectric shock
to persons.
The exclamation
point within an equilateral
user to the presence
of important
operating
instructions
in the literature
accompanying
triangle
is intended
and maintenance
the product.
to alert the
(servicing)
12. Power Cord ProtectionPower supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to
cords at plugs, convenience
receptacles,
and
the point where they exit from the appliance.
17. Object and Liquid Entry- Never push objects
of any kind into this video product through any
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the video product.
13. Outdoor Antenna GroundingIf an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical
Code, ANSl/NFPA No. 70, provides information
with regard to proper grounding of the mast and
supporting
structure,
grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors,
location of antenna-discharge unit, connection to grounding electrodes,
and requirements
for the grounding electrode.
(Fig. A)
18. ServicingDo not attempt to service this video
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
FIGURE
1. Read InstructionsAll the safety and operating
instructions should be read before the appliance
is operated.
2, Retain InstructionsThe safety and operating
instructions should be retained for future reference.
3. Heed Warnings- All warnings on the appliance
and in the operating instructions should be
adhered to.
4. Follow InstructionsAll operating and use
instructions should be followed.
5. CleaningUnplug this video product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and, that for some specific
reason, such as the possibility of the loss of an
authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6. AttachmentsDo not use attachments not recommended by the video product manufacturer
as they may cause hazards.
7. Water and Moisture- Do not use this video
product near water, for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and
the like.
8. AccessoriesDo not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart.
stand, tripod, bracket, or table recommended by
the manufacturer or sold with the video product.
Any mounting of the appliance should follow the
manufacturer's instructions and should use a
mounting accessory recommend,_r_,EOA,_A_<,_
ed by the manufacturer. An appliance and cart combination should
be moved with care. Quick stops
excessive force, and uneven surfaces may cause the appliance
and cart combination to overturn.
_*
9. VentilationSlots and openings in the cabinet
are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating and these openings
must not be blocked or covered. The openings
should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface. This video product should not be placed in
a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources- This video product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your appliance dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the
operating instructions.
11. Grounding or Polarization- This video product
is equipped with a polarized alternating-current
line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to
fit. contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
-2-
A
a. When the power-supply
aged.
cord or plug is dam-
b. If liquid has been spilled, or objects have fallen
into the video product.
c. If the video product has been exposed
water.
EXAMPLE
OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL
CODE
[ DISCHARGE UNIT
J
(NEO SECTION 810-21}
(NEC ART 25/N PAR'[ H}
19, Damage Requiring
Service- Unplug this video
product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
GROUND CLAMP
NEC NATIONAL ELECTRICAL CODE
$2898A
14. LightningFor added protection for this video
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges.
15. Power Lines- An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep
from touching such power lines or circuits as
contact with them might be fatal.
to rain or
d. If the video product does not operate normally
by following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the video product to its
normal operation.
e. If the video product has been dropped or damaged in any way.
f. When the video product exhibits a distinct
char]ge in performance-this
indicates a need for
service.
20, Replacement
Parts- When replacement parts
are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
21. Safety Check- Upon completion of any service
or repairs to this video product, ask the service
technician to perform safety checks to determine
that the video product is in proper operating
condition.
22. Heat- This video product should be situated
away from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
16. OverloadingDo not overload wall outlets,
extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
EN
3. Preset for Use
To Select a Channel
_
....................
You can select a channel by directly
pressing the Number buttons on the
remote control,
I• If channel 3 is already occupied for broadI casting, see"RF Output Channel" section.
',
LANGUAGE
"\
I
STOP
=
I_
PLAYI_
[ON1
FRANCAIS
....................
for using
the Number
but-
•
STOP
PLAy
I,,-
AUDIO
I_
(_i)
[ON]
_F_
•
F FWD
_
.............
AUTO SET
• STOP
CH
AUTO
SET
ll.-MANUAL
r
STEREO
ISTOP
PLAy Ira,-
..........
:-
Press
the
ME.U
ii'iiil
I•
I
l•
I
I•
I
I
The tuner stops on the lowest memorized
I
channel
]
you,can select only the channels memorized 1
in VCR by using the CHANNEL buttons.
I
If "ALITOSET UP" appears on the TV/screen I
again, checkthe cable connections.Then,
I
press the EFWD button once again.j
CHANNEL
30
CATV
......
.......
13/
,,
;
" [
• If you accidentally select Spanish or French
and need English: Press the MENU button
and choose SELEC. IDIOMA, or SELECTION LANGUE. Press the EFWD button,
and select ENGLISH. Finally,press the
C.RESET/EXlT button.
D'_Y MoNYEARo
:
4
--
F FWD=._
cMONTH;
LD1OA5
IYEA
R
4/
r CLOCKS T
• STOP
PLAy I_-
MONTH
or
HOUR
DAY
I 4i_F
_W
MINUTE
AM/PM
2:
,_
S_
HOUR:MINUTE
_)_4/P M M
"
X_.X Sele_
t_e
added or deleted.
F FWD_,,_
[
MANUAL
CHANNF_L
I
YEAR
0
SET UP
11
I_p
p
r
H!nt
o5
.........
b,_/
F FWD
_Please
waitfora few minutes. I
IAf_e_,scanning...
]
MoONTH
F FWD_
SET UP
.....ADD
2) Select "LANGUAGE SELECT" by pressing
the PLAY or STOP button. Then, press the
EFWD button.
j_j_
/ OLOCKSE
......
......
MANUAL
1) Press the MENU button until the main
menu appears.
I'Refer to "Hint for Cable Box or
Satellite Box"section on page 1.
16/
_..
UP
0b_{;_b
01 I
3) Select "ENGLISH", "FRANCAIS" or
"ESPANOL" by pressing the PLAY or STOP
button. Then, press the C.RESET/EXlT button.
F FWD
..... IMON::OOKS%
II
UP
SET
4
F FWDI,-_
3) Select "AUTO SET UP" by pressing the
PLAY or STOP button. Then, press the
EFWD button. After scanning, the tuner
stops on the lowest memorized channel.
I
F MO NTHC LD1OA_:: IY2EAR
[ON]
or_ '_'j ° If the clock is not set, the
_'_._'% CLOCK SET screen
_ ) appears when you press
_._the
MENU button. In this
case, go to step [2].
I_
To Chanqe the On-ScreenLanquaqe
button to exit
PLAyI_
c.....L..T..
pLAy I,-
2) Select "CHANNEL SET UP" by pressing the
PLAY or STOP button. Then, press the
EFWD button.
UP
TV
ISTO
1) Press the MENU button until the main
menu appears.
FFWDb_
SAP
I_-
F FWD_,,_
To Preset the Channel Aqain
\
PLAy
....
ESPAi_4OL
"\
STOP
'
UP
AUTO REPEAT
[OFF]
CHANNEL
SET UP
_" CLOCK
TIMER PROGRAMMING
SET
LANGUAGE
SELECT
AUDIO OUT
OUT
TV STEREO
SAP
• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press 1,1,7)
• You must precede
single-digit
channel numbers
with a zero (For
example:
02, 03, 04 and so on).
SELECT
ENGLISH
Notes
tons:
-MENU-
TIMER PROGRAMMING
AUTO REPEAT
[OFF]
CHANNEL
SET UP
-MENUCLOCK SET
LANGUAGE SELECT
30
(OATV)
Select "ADD" or "DELETE"
_I_:_
I
[
_
CLOCK
ql
SFT
s l,.
HOUR
:MINUTE
z
if_ screen.
o exit the CLOCK SET
FWD_I_
A M/PM
Hint
,#
[
,T,Togo back one step, press the nEW button
• (during the steps [2] to [7].)
Your clock setting will be lost if there is a
power failure or if the VCR has been
[ unplugged for more than 30 seconds.
y
To exit the
menu.
-3-
°O__/"_
RxESTET
i
_
_-_
EN
4. Precautions
i
Install Location
For safety and optimum performance of
rour VCR:
Install the VCR in a horizontal and stable position. Do not place anything
directly on top of the VCR. Do not
place the VCR directly on top of the TV.
Shield it from direct sunlight and keep
it away from sources of intense heat.
Avoid dusty or humid places. Avoid
places with insufficient ventilation for
proper heat dissipation. Do not block
the ventilation holes on the sides of the
VCR. Avoid locations subject to strong
vibration or strong magnetic fields.
Important Copyriqht Information
Unauthorized recording or use of broadcast television programming, video tape,
film or other copyrighted material may
violate applicable copyright laws. We
assume no responsibility for the unauthorized duplication, use, or other acts
which infringe upon the rights of copyright owners.
A Note about Recyclinq
This product's packaging materials are
recyclable and can be reused. Please
dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away
Avoid the Hazards of Electrical Shock and or incinerated but disposed of in accorFire
dance with your local regulations conDo not handle the power cord with wet cerning chemical wastes.
hands.
Note to the Cable TV Svstem Installer
Do not pull on the power cord when
disconnecting it from AC wall outlet.
This reminder is provided to call the
Grasp it by the plug.
Cable TV system installer's attention to
Article 820-40 of the National Electrical
Moisture Condensation Warninq
Code, which provides guidelines for
Moisture condensation may occur inside
proper grounding - in particular, specifythe unit when it is moved from a cold
ing that the cable ground shall be conplace to a warm place, or after heating a nected to the grounding system of the
cold room or under conditions of high
building, as close to the point of cable
humidity. Do not use the VCR at least for entry as possible.
2 hours until its inside is dry.
CAUTION:
FCC Warninq
TO PREVENT ELECTRIC SHOCK,
This equipment may generate or use
MATCH WIDE BLADE OF PLUG TO
radio frequency energy. Changes or
WIDE SLOT, FULLY INSERT.
ATTENTION:
modifications to this equipment may
cause harmful interference unless the
POUR €:VITER LES CHOC
modifications are expressly approved in
€:LECTRIQUES, INTRODUIRE LA
the instruction manual. The user could
LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRElose the authority to operate this equipment if an unauthorized change or modi- SPONDANTE DE LA PRISE ET
fication is made.
POUSSER JUSQU'AU FOND.
If you are having problems operating your product even though you have followed
the instructions in this manual, check the following list of problems and corrective
actions. You may be able to solve the problem yourself.
PROBLEM
CORRECTIVE
ACTION
No power,
Make sure the power plug is connected
Make sure the power is turned on.
Timer recording is impossible,
Make sure the timer recording is set correctly.
Make sure the power is off.
Make sure the VCR clock is set correctly.
Cannot go into Recording
Make sure the tape has a record tab, If needed
cellophane tape,
mode.
Playback picture is partially
noisy.
No playback picture (only sound
can be heard,)
No or poor playback
picture,
to an AC outlet,
cover the hole with
Adjust tracking control for a better picture by pressing
buttons,
the CHANNEL
Head cleaning may be necessary. Refer to "Auto Head Cleaning" on
page 8.
Make sure the VCR is not in the Menu mode.
° Turn on the TV and set the TV to channel 3. If channel 3 is already
occupied for broadcasting, change the RF output to channel 4, and
change the TV channel to channel 4, (See RF Output Channel" on
page 1 for the detail,)
Fine tune the channel reception on your TV.
TV programs cannot be seen normally.
Re-check the ANT. IN and ANT. OUT connections, See page 1.
Press the VCR/TV button on the remote control so that the VCR/TV
indicator on the VCR disappears,
No VCR operation from the
infrared Remote Control.
Make sure the power plug is connected
Check batteries in remote control,
Video or color fades in and out when ° You cannot copy a copyrighted
making a copy of a video tape.
guard protection.
Video Heads :
Operating temperature
Converter output :
Four Heads
: 41°F~104°F
(5°C~40°C)
VHF Channel 3 or 4.
to an AC outlet,
video tape, You are experiencing
copy
Power requirement : 120V, 60Hz
Power consumption : 14 Watts
Dimensions :
W 14-3/16" (360mm)
H 3-5/8" (92ram)
D 8-9/16" (216mm)
Weight :
4.0 Ibs. (1.8 Kg.)
(approx.)
• Designs and specifications are subject to change without notice and legal obligation.
• If an explanation in the Owner's Manual is not consistent across languages, please
refer to the English version.
4-
EN
5. Playback
Before:
7. Other Operations
Turn on the TV and set it to
channel 3.
-If channel3 is already occupied for broadcasting, see "RF OutputChannel"section.
[_]_
1
2
ooo
3
8680
[ PLAYI_,
V
Hint
_,x,
i
i? [ i[ )););:
[E,EOT_-• When a tape without recordtab is inserted,the VCR will start playbackauto-
/ STOP
maticallyat step [1].
• Trackingwillbe automaticallyadjustedupon playback.Toadjust the trackingmanually,presstheCHANNELbuttons.
To cue or review picture during playback (Picture Search)
Press the F.FWD or REW button.
• Press it again and the VCR will now
search in super high speed. (in the
LP/SLP modes only)
To play back in slow motion
Press the SLOW button during playback
or the still mode.
• If the noise bar appears on the TV
screen, you can reduce it by pressing
the CHANNEL buttons.
To freeze the picture on TV screen
durinq playback (Still mode)
Press the PAUSE/STILL button. Each
time you press the button, the picture will
be forwarded by one frame.
• If the picture begins to vibrate vertically
during the still mode, stabilize the picture by pressing the CHANNEL buttons.
• If the picture is distorted or rolling vertically, adjust the vertical hold control on
your TV, if equipped.
Counter Reset
Press the C.RESET/EXlT button.
To temporarily
stop recording
(Pause mode)
Press the PAUSE/STILL button.
• During the rec pause mode, five |
marks appear on the TV screen. Each II
mark represents one minute.
• Press it again to resume recording.
6. Recording & OTR (One Touch Recording)
Auto Rewind
When a tape reaches its end during playback, fast-forward, or recording (except
timer recording and One Touch
Recording), the tape will automatically
rewind to the beginning. After rewinding
finishes, the VCR will eject the tape and
turn itself to off.
Before:
Turn on the TV and set it to
channel 3.
If channel3 is alreadyoccupiedfor
broadcasting,see "RF OutputChanneFsection. [_
±_JECT
W_th
t_
_e;rl°t÷
6
COl/iia)
--
6 6
6_
_JScm_r
CH126,o6
8. On-Screen
V._
1
2
3
7
8
9
-q
1
_To
call up the main menu
_,
\,.
_ii
0
I
3_
.....
\ _ desiredchann, _
_
0
0
S
S
......................................
. speed
Selectthedesiredtape 3_]°
_]o _
_ _
"\\ _
MENU
[]
2_To
iii
¸¸i,i
'i'¸¸
You can select a fixed recording time by pressing the REC/OTR button repeatedly.
on it later, cover the hole with cellophane
tape.
P_¥_
_or
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its record tab. To record
_
:
_To
Record tab
f
select
=sTo_
"%_
Operations
an item
_1
%
-MENU-
[]
AUTO
[OFF]
TIMER REPEAT
PROGRAMMING
!I_CHANNEL SET UP
]_
,
k\'
_" TIMER PROGRAMMING
AUTO REPEAT
[OFF]
CHANNEL
SET UP
CLOCK -MENUSET
LANGUAGE
SELECT
_
LANGUAGE
SELECT
CHANNEL
SET UP
eLoeN
SET
decide
1
FF_
2
3
8
9
1
OC_
L,_X"
,
AUTO SET UP
_" MANUAL SET UP
7
0000
MENU
_oo_
_X
STOP
\
'_
Q\
|
EJECT A
[ EJECT
"
",
&
• Ifyou haveconnectedtheVCRto a cableboxor satellitebox,referto"Hintfor
CableBoxor SatelliteBox"sectionon page1.
4_,_To
SE%_
i
0
slow _g_
f
@
exit the menu
OR
[]
EN
9. Recording
Features
olnsert a tape with its record tab into the VCR.
19/
-MENU-
_
TIMER PROGRAMMING
AUTO REPEAT
[OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
[ON]
SAP
MENU
elect the desired
time (hour)
=sic'
p_¥_
(_
ONE TIME
or _)
CHANNEL
END
TIME
REO SPEED
roNET,MEPRoGRAM
ql
ISTOP
pLAy I_,_
..............
PROGRAM
DATE
PROGRAM
NUMBER
05/03
START TIME
07_0
_r_
F FWD_
start
]
PROGRAM
DATE
NUMBER
05/03
4
1
MON
]
T RTT,ME
07:30
PM
or
END
TIME
CHANNEL
4 MON
_-
08:30
_16
PM
REC SPEED #p
I ".....
- -
1
Selectthedesiredrecordingspeed
Select the
minute
2_
ISTOP
PLAY_
,
_o_
PROGRAM
NUMBER
DATE
/
START TIME
:
END
.........
:x
TIME
S_
_p_
number
:4 _!
_
i
i
To cancel a Timer Recording that is in progress
Press the STOP/EJECT button on the VCR.
=
or
__
• If there is a power failure or the VCR has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If the tape runs out before the end time, the VCR will switch to the Stop mode
immediately, eject the tape and the VCR power will be turned off. The TIMER
indicator will flash.
• If a tape is not in the VCR or does not have the record tab, the TIMER indicator
flashes and timer recording cannot be performed. Please insert a recordable tape.
• When all the Timer Recording are completed, the TIMER indicator flashes.
To play or eject the recorded tape, press the POWER button first, and then
press the PLAY or EJECT button.
l_!urn
\
:--
I,TIMER ndcatorontheVCR
FFWD_
pr_am
off the VCR r_
or recording
\
t"°t"°t"°t"°t"_L
_ )7
ghts up.
Warning:
Unauthorized
may be an infringement
recordings
of copyrighted
of copyright
laws.
video
tapes
(Back of TV)
(ONETIMEPROGRAM
/
F FWD_.
.STOP
PLAY_
DPARTCEG
RAM
NUM5B/EoR3 4MO N
To Check, Correct, or Cancel a
Timer Program
I::': W)
[
,
\._Select "AM"or "PM"
F F-l,a]D
(Mon-Fd),or "WEEKLY"
_
procedure
in steps 1
5 epeat
and 6 the
to set
the end time.
FFWD_
F FWD
_
Select the desired month
slop
(_
PLA¥_
or
_
ONE TIME
PROGRAM
/ PRTOF
GRAM NUM5BER_4MO
N
START TIME
- - :C
_ _
]
II STOP
/
or
_
Select
ISTOP
_or
the desired
day
p_y_
_
,,
.You can programone
yearinadvance.
F FWD _
D-<>
PLAY I_,_
=
PROGRAM
NUMBER
DATE
05/03
START TIME
07:30
4
/
MON
PM
CHANNEL
__END
TIME
08:30
PM
:
_-_ Selectthedesiredchannel
Ifyou haveconnectedtheVCRto a cable
box or satelliteboxas theConnectionA
on page1, selecttheVCRto channel3 or
4 (the RF output channelofthe VCR).
Then,selectthedesiredchannelat the
cableboxor satellitebox Leavethe cable
box or satelliteboxon for timerrecording,
F FWD_-_
1) Turn the power on by pressing
the POWER button.
2) Select main menu by pressing
the MENU button.
3) Select "TIMER PROGRAMMING" by pressing the PLAY or
STOP button. Then, press the
RFWD button.
4) Select the program number
which you want to check by
pressing the PLAY or STOP button. The details of the program
you selected will appear on the
TV screen.
• Go to the digit you want to
change by pressing the RFWD
or REW button. Then, enter correct numbers by pressing the
PLAY or STOP button.
• You may cancel the entire program by pressing the REW button while the program number
flashes.
5) Press the C.RESET/EXlT button
to exit.
6) Press the POWER button to
return to timer stand-by mode.
*Front input jacks are also available
1) Insert a pre-recorded
tape into the playing VCR.
2) Insert a tape with its record tab into the recording VCR.
3) Press the SPEED button on the remote control of the recording VCR
to select the desired recording speed (SP/SLP).
4) Select the "LI" or "L2"position on the recording VCR.
• To use the input
pressing [0], [0],
• To use the input
pressing [0], [0],
jacks on the back
[1] on the remote
jacks on the front
[2] on the remote
of the VCR, select "L1" position by
control or the CHANNEL buttons.
of the VCR, select "L2" position by
control or the CHANNEL buttons.
5) Press the REC/OTR button on the recording VCR.
6) Begin playback of the tape in the playing VCR.
7) To stop recording, press the STOP/EJECT button on the recording
VCR, then stop playback of the tape in the playing VCR.
Hint
Forbestresultsduringdubbing,usetheVOR'sfrontpanelcontrolswheneverpossible.
The
remotecontrolmightaffecttheplayingVCR'soperation.
Alwaysusevideo-qualityshieldedcableswithRCA-typeconnectors.
Standardaudiocablesare
not recommended.
•Youcanuse avideodiscplayer,satellitereceiver,or otheraudio/video
component
withAN outputsin placeofthe playingVCR.
• "LI" or "L2"is foundbeforethelowestmemorized
channel.(Example:
CH02)
EN
t0. Special
11. MTS System
(Multi-Channel Television Sound)
Features
You can specify the time for
fast forwarding or rewinding+
You can specify the number of
programs to be skipped+
,, hsert a tape into the VCR.
,, hsert a tape into the VCR.
You can repeat playback of a
whole tape automatically.
• Insert a tape into the VCR.
-MENU-
V_2
::2.'_
F_
:?:;
.....
< ....
TIME SFABCH
•
I xl (Once)
I x2 (Twice) L
F
STOP
PLAYI_
TIMER PROGRAMMING
I_- AUTO REPEAT
[OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE
SELECT
AUDIO OUT
TV STEREO
[ON]
SAP
Select the desired length
of time for fast forwarding
or rewinding
-MENU-
CURRENT
01 ~ 20
PROGRAM
,+TOP I%t Rq
O2
0:01~ 9:59
(1 minute~9 hours
and 59 minutes)
02
01
01
STEREO
O3
MAR}K'_
i To fast forward
rAUTO"E"EAT"
1
44REW
Stereo
broadcast
qnwlid-
Bilin ual
broa_st
TVSTEREO
(n_ail_audio program)
SAP
(second audio plogram)
Stereo &
Bilingual
broadcast
1
(stereo
for Time
Search
non Hi
k
Uoha_nel
Fi tapes
R-ehm,
Monaural
nel
Monaura_
.......
Monaural
Hi.Fi tapes
lecorded
in
14i: Fi t!ereo
Hi FitaP_
reco, ded main
audio
Main
program
audio
Mairl
program
Second
,audio } Second
program
i
STOP
Main
audio
program
audio
program
-MENU-
V_EEN2
•
audio
program
pLAyI_
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL
SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
{ON]
SAP
TV STEREO
main audio p_ogmm)
SAP
(second audio plogram)
After searching,
W r"LA+ l
• T_To
cancel Auto Repeat, follow steps [1]-[2]
above, Then, press the EFWD button so
that [OFF] appears beside AUTO REPEAT
I Press the C.RESET/EXlT button to exit.
• If menu remains on the TV screen at step
3, press the C.RESET/EXT button to ext.
ISTOP
PLAY
I1,-
TIMER PROGRAMMING
AUTO REPEAT [OF_
CHANNELSETUP
CLOCKSET
LANGUAGE
SELECT
AUDIO OUT
TVSTEREO
[ON]
SAP
STO
F FWD
& Index
Search
LAYI_
I AUO,OO
_" HIFI
[ON]
Select "TV STEREO" or
"SAP"
_
To exit the menu.
Hint
STEREO
T'y4 oi ;+;;;d_;_#
-MENU-
F FWD_
_
I PLAY.
qnwlid-
• If you have connected a
stereo TV to this VCR, select
"STEREO".
• If you have connected a
monaural TV to this VCR,
select "MONO".
F FWD
44REW
After searching,
STEREO/SAP
£el_tion
Regul_
_Ol,auralaudi01
-None-
To fast forward
F FWD_
_4///
Tyrol
broadcast
D& layonthe
T_ screen
s_%;o
To rewind
To rewind
INDEX
TIMER PROGRAMMING
I_- AUTO REPEAT
[ON]
CHANNEL
SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
[ON]
SAP
• When you receive a broadcast on the VCR, you can
check the type of the broadcast by pressing the DISPLAY
button.
• When "TV STEREO" or
"SAP" selection is valid,
select them by following
steps. This selection is needed when you record the program.
• SAP means Second Audio
Program (usually second language).
3L_To
exit the menu.
I These functions are not available during recording.
I • Press the STOP button to stop the search.
• If the end of the tape is reached during a Search, the VCR will cancel the search and rewind the
ape.
-7-
EN
t 2. information
Funai Corporation
will excnange
[s ODUOn. in the event of defect
snip as follows:
EXCHANGE
1-90
DURATION:
DAYS:
DAYS:
retail
_ .ircnase,
FUNAI CORPORATION
will exchange
for a factory-servlce-To-new-conaltlOr
unit for a charge of a retailed Drlce unit
for the period of ninety one (9r } days to
tnree hundred
sixty five
tne date of original rein
REPAIR
(365) days
purcdase.
from
DURATION:
LABOR:
FUNAI
CORPORATION
will
3rovlae
me
_abor without cnarge for a period of
ninety (go) days from the date of original fetal 3urenase,
PARTS:
FUNAI
CORPORATION
Darts 1o reDlace
will
defective
3rOvlde
parts wlmout
cnarge for a Period of one _1) year from
the date of original retail purchase,
Certain
parts
are excluded
from
[nls
warranty.
LIMITS
AND
THIS WARRANTY
IS EXTENDED
ONLY TO THE ORIGINAL RETAIL PURCHASER,
A PURCHASE
RECEIPT
UCT TO OBTAIN
THIS WARRANTY
This warranty
or transferee,
OF ORIGINAL
TOGETHER
EXCHANGE
RETAIL PURCHASE
WITH THE PROD-
OR SERVICE
shall not be extended
UNDER
to any omer
Derson
This warranty
is void and of no effect if any serial numBets on me oroduct are altered, reolacea,
defaced or
missing
This SYLVANIA
Limited warranty
applies
Droauct Durcnasea ana used in the United States,
only to
This product is produced
for home use _na mls warranty
only covers failures due to defects in matenal or WORKmansnlp
wnlcn occur aunng normal
use. It does not
cover damage which occurs in sh umem. or failures
wnlcn are caused
by repairs, alterations,
or parts nol
supptled by FUNAI CORPORATION.
or damage
wnlcn
results from accidenl
application,
alteration,
tenance commercial
use of this
flood,
Product.
lightning
misuse, abuse, mishandling,
misfaulty 3s[allaTion. improper mainuse sucn as notel rental or office
or damage
or omer
Servicing
Auto Head Cleaning
FUNAI CORPORATION
AND ITS REPRESENTATIVES
OR AGENTS SHALL IN NO EVENT BE LIABLE FOE
ANY GENERAL
INDIRECT
OR CONSEQUENTIAL
DAMAGES
ARISING
OUT OF OR OCCASIONED
BY
Should your VCR become inoperative, do not
try to correct the problem by yourself. There
are no user-serviceable parts inside. Turn off,
unplug the power plug, and please call our
help line mentioned on page 1 to locate an
Authorized Service Center.
THE USE OF OR THE
UCT. THIS WARRANTY
Cabinet
Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt
accumulated on the video heads after long periods of use, or the usage of rental or 'worntapes
can cause this problem. If a streaky or snowy picture appears during playback, the video heads in
your VCR may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the
problem, please call our help line mentioned on
page 1 to locate an Authorized Service Center.
NOTES:
. Remember to read the instructions included with
the video head cleaner before use.
Clean video heads only when problems occur.
PARTS.
DEMONSTRATION
INABILITY
IS MADE
OR
TO USE THIS PRODIN LIEU OF ALL
OTHER WARRANTIES
INCLUDING
THE WARRANTY
OF MERCHANT
ABILITY
AND FITNESS
FOR A PARTICULAR
CLAIMED
PURPOSE
BY FUNAI
RESENTATIVES
STATES.
THAT ARE HEREBY
DISCORPORATION
AND ITS REP-
OR AGENTS
ALL WARRANTY
IN THE
INSPECTIONS
AND
UNITED
REPAIRS
MUST
BE PERFORMED
BY A FUNAI AUTHORIZED
CENTER, THIS WARRANTY
IS VALID WHEN THE PRODUCT IS DELIVERED
PREPAID TO A FUNAI AUTHORIZED
SERVICE
IMPORTANT:
THIS LIMITED
LEGAL
which
results
from
fire.
Cleaning
Wipe the front panel and other exterior surfaces of the VCR with a soft cloth immersed
in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
insecticide liquid near the VCR. Such chemicals may cause damage and discoloration to
the exposed surfaces.
FACILITY.
WARRANTY
RIGHTS
YOU MAY
GIVES
HAVE
YOU SPECIFIC
OTHER
RIGHTS
THAT VARY FROM STATE TO STATE IF AT ANY TIME
DURING THE WARRANTY
PERIOD YOU ARE UNABLE
EXCLUSIONS:
OR OTHER
PROOF
WILL BE REQUIRED
THIS WARRANTY
DOES NOT COVER PACKING
MATERIALS
ANY ACCESSORIES
EXCEPT
REMOTE
CONTROL
UNITS
ANY COSMETIC
PARTS COMPLETE ASSEMBLY
FLOOR
MODELS.
FUNAI COqPORATION
will exchange
for a new unit without charge for a penca of ninety (90) days from the date of
original
91-365
or repair [ns product,
at
Jn matenals
or workman-
TO OBTAIN SATISFACTION
WITH THE EXCHANGE
OR REPAIR OF THIS PRODUCT
PLEASE
CONTACT
FUNAI CORPORATION.
ATTENTION:
FUNAI CORPORATION RESERVES THE
RIGHT TO MODIFY ANY DESIGN OF THIS
PRODUCT WITHOUT PRIOR NOTICE
For information about your product or for
information on how to exchange or repair you[
product, telephone or write to the following:
FUNAI CORPORATION.
INC.
SERVICE
CENTER
19900 Van Ness Avenue. Torrance. CA 9050"
Tel :1-800-968-3429
http:llwww.SylvaniaConsumerElectronics,com
Head Office: 100 North Street. Teterboro NJ 07608
PLEASE
DO NOT SHIP YOUR
UNIT TO THE
TETERBORO
ADDRESS
acts of God.
-8-
PREPARACK)N DE CANALES
(La antena o la caja de televisiGn pot
came debera estar conectada)_
NOTES: Cuando utilice su nueva
videograbadora pot primera vez, o en e!
caso de ser necesario despu_s de producirse un fallo en la alimentaciGn, la
videograbadora se pondr4 inicialmente en el
modo de prea]uste cuando se pulse
[POWER].
!. Encienda el televisor y ponga el televisor
en el canal 3.
2. Pulse [POWER] para encender la
videograbadora.
3. Seleccione "ENGLISH",
"FRANCAIS"(French)
o "ESPAi_OL"
SELEC.
IDIOMA
(Spanish) pulsando
ENGLISH
[PLAY] o [STOP],Y
FRANCAIS
luego pulse [EFWD].
_. ESPAiIOL [ON]
4. Pulse una vez
[RFWD].
E! sintonizador exp!ora
y memoriza todos los canales activos de su
zona. Tras la exploraci6n, el sintonizador se
detiene en el canal memorizado m4s bajo.
PREPARACION DEL RELOJ
1=Pulse [MENU] hasta que aparezca el
menu principal. (Si el reloi no est4 puesto
en hora y se pulsa [MENU], el menO
AJUSTE DE RELOJ aparece en primer
lugar. En este caso, siga el paso 3.)
2. Pulse [PLAY] o [STOP] para indicar a
"AJUSTE DE RELOJ'L Luego, pulse [RFWD].
Luego, pulse [F.FWD]
[_Yi o iSfS_i:.......
Luego, pulse [F.FWD]
Pulse [epetidalnente PLAY o STOP
Luego, pulse [F FWD]
Luego, pulse [F.FWD]
Ril]_,_rg}iii_.,8,;i_
iF'_Y;_,[gfBPj:........
Luego, pulse [F.FWD]
1
...............................
MES
DIA
, Para volver atr4s un
03 / 15 LUN 2004
paso, pulse [REW].
4. Pulse [RFWD] para
poner en fun-
HORAMINUTO
_M!PM
05 : 40
pM
AM
\_-PM
cionamiento
el reloi.
J
Ai_lO /
EN
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 8 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Thu Apr 05 03:45:40 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools