Sylvania 6620LDT User Manual LCD TV/DVD Manuals And Guides L0606448
SYLVANIA TV/VCR or DVD Combo Manual L0606448 SYLVANIA TV/VCR or DVD Combo Owner's Manual, SYLVANIA TV/VCR or DVD Combo installation guides
User Manual: Sylvania 6620LDT 6620LDT SYLVANIA LCD TV/DVD - Manuals and Guides View the owners manual for your SYLVANIA LCD TV/DVD #6620LDT. Home:Electronics Parts:Sylvania Parts:Sylvania LCD TV/DVD Manual
Open the PDF directly: View PDF 
.
Page Count: 44
| Download | |
| Open PDF In Browser | View PDF |
SYLVANIA
OWNER'S MANUAL
{20 inch)
--.- -_.-_• .....
-
WARNING:
TO REDUCE
THE RISK
OF FIRE OR ELECTRIC
SHOCK,
DO NOT EXPOSE
THIS APPLIANCE
TO RAIN OR MOISTURE,
THIS
|
CAUTION
|
SYMBOL
SHOCK
CAUTION:
TO REDUCE
THE RISK
SERVICING
TO QUALIFIED
The caution marking
SERVICE
IS PRESENT
THIS SYMBOL
OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK).
USER SERVICEABLE
PARTS INSIDE. REFER
INDICATES
DANGEROUS
VOLTAGE
CONSTITUTING
A RISK
THAT
OF ELECTRIC
WITHIN
INDICATES
THIS
UNIT.
THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE
INSTRUCTIONS
IN THE
NO
LITERATURE
APPLIANCE.
PERSONNEL
ACCOMPANYING
THE
is located on the rear of the cabinet.
PORTANT SAFEGUARDS
I.
2.
3.
4.
5.
6.
7.
Read instructions - All the safety and operating instructions should
be l_ad before the appliance ix operated.
Retain Instructions - The st@ty and operating instructions should
be l_tained for flmu_ refel_nce.
10. Power Sources - This unit should be operated only from the type of
power sourc'e indicated on the marking label. If you are not slu> of
the type of power supply to your home, consult your appliance dealer or local power company. For the units intended to operate from
battery powm: or other sources, rei)r to the operating instructions.
11. (;rounding or Polarization - This unit ix equipped with a polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the plug
fldly into the outlet, try reversing the plug. If the plug should still
fail to fit, contact your electrician to replace your obsolete outlet.
Do not dermalthe safety purpose of the polarized plug.
12. Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by' items placed
upon or against them, paying particular attention to coMs at plugs,
convenience receptacles, m_dthe point where they exit from the
appliance.
13. Outdoor Antenna grounding - If an outside antenna or cable system ixconnected to the unit. be sure the antmma or cable system ix
grounded so as to pmvide some protection against voltage surges
and built-up static charges. Mlicle 810 of the National Electrical
Code. ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and suppolling structm>, grounding of
the lead-in wire to an m_tennadischm?aeunit. size of grounding conductors, location of _mtenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. (Fig. A)
Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
Follow Instructions - All operating and use instructions should be
followed.
Cleaning - Lh_plug tire unit ti'orn tire wall outlet betore cleaning.
Do not use liquid cleaners or aerc)sol cleaners. Use a damp cloth
tor cleaning.
EXCEPTION: A product thai is meant for uninterrupted service
and, that flor some specific reason, such as the possibility' of the loss
of an authorization code for a CATV converiel: ix nN intended to be
unplugged by the user fMrcloturing or any other purpose, may
exclude the l_t)rence to unplugging the appliance in the cleaning
description otherwise required in item 5.
AttaehmenN - Do not use attachments not recommended by the
unit manufac'turer as they may cause hazards.
Water and Moisture - Do not use this unit near water - for exampie, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, _mdthe like. p..................
Accessories - Do not place this unit on an unstable
cart, st_md,tripod, bracket, or table. The unit may
fall. causing serious injury to someone, and serious
damage to the appli_mce.Use only with a cart, st_md,
tripod, brac'ket, or table recommended by the manufacturel_ or sold with the unit. A W mounting of the appliance should
follow the manufac'tm>r's instructions and should use a mounting
accessory recommended by the manufac'tul_r. An appliance _mdcart
combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cml combination to overturn.
FIGURE
A
EXAMPLE
OF ANTENNA GROUNDING
AS PER
NATIONAL
ELECTRICAL
CODE
Amenbles - Cet appareil ne doit _lre placd que sur _,_0¢_0
.................
UM nmuble (avec OU sans
roulettes) l'ecommandd
appaREI_
Les¢OM_SaNTE8
ETMEUBLEa ROULFTE_
par le thbricant. Si vous l'installez sur un meuble _
roulettes, d@lacez los deux ensembles a_ec pr&
caution. UMarr_t brusque, l'utilisation d'une forc'e
excessive et des surfaces irrdguli_res risquent de
ddstabiliser l'ensemble et de le renversel:
_entilation - Slots and openings in the cabinet and the back or bof
tom al_ provided for ventilation _mdto ensm_ reliable operation of
the unit and to protect it fl'om overheating, and these openings must
not be blocked or covered. The openings should never be blocked
by placing the unit on a bed. sofa. rug, or other similar surface. This
unit should never be placed near or over a radiator or heat l_gister.
This unit should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufi,cturer's instructions have been adhered to.
EN
-
(NECSECTION_10 21_
NEC N_tIONALELECTRICa_CODE
82898A
2-
ELECTRODE SYSTEM
(NECART250PA_T_I
14.Lightning-For added protection for this unit receiver during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it fi'om the wall outlet and disconnect tile antenna or cable system. This will prevent damage
to the unit due to lightning and power-line surges.
15.Power Lines-An outside antenna system should not be located
in tile vicinity of overhead power lines or other electric light
or power circuits, or where it call fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
16.O_erloading-Do not overload wall outlets and extension
cords as this call result ill a risk of fire or electric shock.
17.Object and Liquid Entry-Never push ol!jects of any kind
into this unit through openings as they may touch dangerous
voltage points or short out paris that could result ii1a fire or
electric shock. Never spill liquid of any kind on the unit.
18.Serqeing-Do not attempt to service this unit yourself as opening
or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19.Damage Requiring SerQce-Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under tile following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into tile unit.
c. If tile unit has been exposed to rain or water.
d. If the trait does not operate normally by following the operating instructions. Adjust only those controls that are coveted by the operating instructions, as improper adjustment
of other controls may result in damage and will ofien
require extensive work by a qualified technician to restore
the unit to its normal operation.
e. If the unit has been dropped or damaged ill ally way.
f. When the unit exhibits a distinct change in perfonnance,
this indicates a need for service.
20.Replacement
Parts-When replacement parts ale required, be
sure the service technician has used replacement parts specified by the manufacturer that have tile same characteristics as
tile original part. l Jnauthorized substitutions may result ill fire,
electric shock, injury to persons or other hazards.
21 .Safety Check-Upon completion of any service or repairs to this
unit, ask the service teclmician to perform routine safety checks
to determine that the unit is ill proper operating condition.
22.Heat-This
unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
IMPORTANT
LASER SAFETY
Tiffs unit employs a laser. Only a qualified service person
should remove the cover or attempt to service this device,
due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
COPYRIGHT
INFORMATION
Unauthorized
copying, broadcasting,
and lending of discs are prohibited.
public perfommnce
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is iutended lk_r home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
FCC WARNING- This equipment
may generate or use
radio frequency energy. Changes or modifications
to this
equipment may cause harmful interference unless the modifications are expressly approved in the owner's manual.
The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
RADIO-TV
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil num6rique de la classe B est conforme h la
norme NMB-003 du Canada.
LOCATION:
NISM.
INTERFERENCE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential
iustallation. This equipment generates, uses, and call radiate
radio frequency energy and, if not installed and used in
accordance
with tile instructions,
may cause harnfful interference to radio communications.
However, there is no guarantee that interference
will not
occur in a particular
installation.
If this equipment does
cause harmful interference
to radio or television
reception,
which can be determined
by turning the equipment
off and
on, the user is encouraged
to try to correct the interference
by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Conuect tile equipment into all outlet on a circuit
cut from ttmt to which the receiver is connected.
4) Consult tile dealer or an experienced radio_V
differ-
technici_m for help.
INSIDE, NEAR THE DECK MECHA-
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION: POUR I_VITERLES CHOC I_LECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISEET
POUSSER JUSQU'AU FOND.
A NOTE ABOUT RECYCLING
Tiffs product's packaging materials are recyclable and call
be reused. Please dispose of any materials ill accordance
with your local recycling regulations.
Batteries should never be thrown away or incinerated but
disposed of ill accordance with your local regulations conceming chemical wastes.
The serial number of this product may be l_und on tile back of tile unit. No other unit has the same serial number as yours.
You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification ill case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase
from
Dealer Address
Dealer Phone No.
Model
No.
Serial No.
-3-
EN
.IPPLIED ACCESSORIES
Remote Control Unit
Batteries
( NE240UD )
2 AA Batteries
Owner's Manual
( IEMN21900
)
" If you need to replace these accessories,
please refer to the PART NO. under the illustrations mad call our
help line mentioned on the front page.
,, Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators
(Splitter). Contact your local electronics store for these items.
For safe operation and satisfactory
performtmce of
your unit, keep the following in mind when selecting
a place for its installation:
,, The stand of this TV is
folded when you purchased.
Place this TV face-down
on a flat surface covered
with the soft cloth.
Moisture condensation may occur inside the unit when
it is moved from a cold place to a warm place or after
heating a cold room or under conditions of high humidity. If a DVD is played in a unit which has moisture, it
may damage the DVD and the unit. Therefi_re when the
condensation occurs inside the unit, turn the unit on
and allow at least 2 hours for the unit to dry out.
,, Bend the stand slowly to
forward until it clicks.
The following symbols
ings in this manual.
,, If you want to fold the sttmd again,
insert a thin rod into the hole in
the right side of the st_md as
illustrated, bend the stand backward while you keep pushing the
hole.
,, Shield it from direct sunlight and
keep it away from sources of intense heat.
,, Avoid dusty or humid places.
,, Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes at the top or bottom of the unit. Do not place
the unit on a carpet because this will block the
ventilation holes.
in some head-
: Description refers to playback
(in the DVD mode).
of DVD video discs
: Description refers to playback
(in the DVD mode).
of Audio CDs
S NPLMP.3j
: Description refers to playback of CD-RW/-R
MP3 files (in the DVD mode).
,,
*
,,
,,
Install unit in a horizontal position.
Avoid locations subject to strong vibration.
Do not place the unit near strong magnetic fields.
Avoid moving the unit to locations where
temperature
differences are extreme.
,, Be sure to remove a disc trod unplug the AC power
cord from the outlet before carrying the unit.
with
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
You can adjust the stand to chtmge the angle of the
TV (-5 ° to 10°).
_5°
10 °
,, Do not htmdle the power cord with wet hands.
,, Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.
,, If by accident, water is spilled on your unit, unplug
the power cord immediately
and take the unit to our
Authorized Service Center for servicing.
,, Do not put your fingers or objects into the unit disc slot.
,, Do not place anything directly on top of the unit.
i i
il
i
I
EN
below appear
-4-
i
,
OF CONTENTS
PRECAUTIONS
IMPORTANT
................................
SAFEGUARDS
......................
SUPPLIED ACCESSORIES
LOCATION
2
2
.......................
4
.................................
................
MOISTURE
WARNING
........................
SYMBOLS
USED IN THIS MANUAL
..............
TILT STAND .................................
FEATURES
..........................
...................................
21
21
SPECIAL
4
A-B REPEAT
4
PROGRAM
CONTROLS
INSTALLING
AND FUNCTIONS
THE BATTERIES
PREPARATION
..........
CHANGING
..................
FOR USE ........................
ANTENNA/CABLE
CONNECTION
EXTERNAL CONNECTION
................
.....................
7
THE SETTINGS
LANGUAGE
26
9
BLACK LEVEL SETTING
...........................
VIRTUAL SURROUND
28
[]
PARENTAL CONTROL
13
[]
OTHER SETTINGS
..................
MTS (Multi-Channel Television Sound) System ......
V-CHIP SET UP .............................
13
INITIALIZE
14
LANGUAGE
14
15
[]
TV RATING SET UP ......................
15
[]
MPAA RATING SET UP
16
[]
CHANGE
...................
ACCESS CODE
MENU LANGUAGE
.................
..........................
16
16
DISCS ............................
17
PLAYABLE DISCS ...........................
17
UNPLAYABLE
17
DISCS
........................
PLAYING A DISC ..............................
18
DISC MENU
...............................
19
TITLE MENU ...............................
19
RESUME
19
..................................
...................................
STEP BY STEP PLAYBACK
SLOW FORWARD / SLOW REVERSE
....................................
29
....................
29
......................
30
MAINTENANCE
SPECIFICATIONS
DESIGNATIONS
GUIDE
............................
.............................
...................................
..........................
31
.............
....................
...............................
DISC HANDLING
30
......................
31
32
35
35
35
36
Back Cover
19
...................
FAST FORWARD / FAST REVERSE
ZOOM
28
.......................
18
BASIC PLAYBACK ...........................
PAUSE
......................
CODE LIST
TROUBLESHOOTING
WARRANTY
ABOUTTHE
....................
.................................
CABLE CHANNEL
ESPAI_IOL
28
28
13
SYSTEM
27
SETTING
AUDIO SETTINGS
CLOSED CAPTION
.................
............................
[]
..............................
26
THE DVD SET UP ITEMS ..............
12
SLEEP TIMER
26
........................
INFORMATION
CUSTOM MENU
11
......................
DISPLAY SETTING
.......................
25
25
ANGLE
[]
BACK LIGHT SETTING
25
CAMERA
11
.........................
25
..........................
WATCHING A TV PROGRAM
CONTROL
24
.....................
LANGUAGE
PICTURE
24
.......................
[]
SET UP ..........................
23
........................
11
CHANNEL
23
................................
INITIAL SET UP .............................
..................
23
9
10
.................
.................
STEREO SOUND MODE ......................
CHANGING
AND SETTINGS
22
...............................
THE ON-SCREEN
TV OPERATION
FUNCTION
AUDIO LANGUAGE
8
22
...................
..................................
RANDOM PLAYBACK
6
...................
.............................
PLAYBACK
REPEAT
SUBTITLE
OPERATING
SEARCH
SET UP SCREEN
4
5
21
TITLE / CHAPTER
MARKER
4
...........................
TRACK SEARCH ............................
TIME SEARCH
4
TO AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
TABLE OF CONTENTS
SEARCH FUNCTION
.............
............
19
20
20
20
-5-
EN
ES
TV Mode
I
® MTS/SAP Tuner
® Auto power off system-If there is no air signal input
fiom the antenna terminal and no operation fur 15
minutes, the unit will turn itself off automatically.
• Sleep thner-Allows you to have the unit automatically turn off at a desired time.
® V-CHIP-Enables parents to prevent their children
from watching inappropriate material on TV.
* Infrared remote control
® Trilingual on screen TV setup display available in
English, Spanish or French
* 181 channel eapabilRy PLL frequency synthesizer
tuner with direct station call (A converter may be
necessary to view- scrambled cable chmmels.)
* Closed Caption Deeoder-Yun
may view specially
labeled (cc) TV programs, movies, news, etc. with
either a dialogue caption or text display added to
tile program.
DVD Mode
I
* Parental
• Dolby Digital sound
This unit czm htmdle Dolby Digital Multi-chzumel surround sound when connected to a Dolby Digital
decoder.
You can set the control level to limit playback
discs which may not be suitable for children.
This unit automatically
detects
DVD, Audio CD or CD-RW/-R
if the loaded disc is
with MP3 files.
,, On-screen display
Information
about the current operation can be displayed on a TV screen, allowing you to confirm
the currently active functions (such as program
playback), on the TV screen using the remote control.
,, Random playback for Audio CD and MP3
This unit can shuffle the order of tracks to play
them in random order.
,, Program playback for Audio CD and MP3
Yuu can program the order of tracks to play them
in troy desired order.
* Search
Chapter search /Title search /Track search /Time
search
,, DVD menus in a desired language
* Repeat
Chapter / Title / Track / Group / All / A-B
Yuu can display DVD menus in a desired language, if available on a DVD.
saver
o
Zoom
Allows you to enlarge video image.
If the screen saver program is set to ON, it starts
when there is no input from the unit fur 5 minutes
in stop mode.
" Marker
The part designated by user can be called back.
,, Subtitles iu a desired lauguage
Yuu can select a desired lmlguage for the display
subtitles, if that language is available on a disc.
,, Resume Play
User ctm resume to playback frum the part at
which the play was stopped.
,, Virtual Surround
,, Selecting a camera augle
Yuu can select the desired camera mlgle, if a disc
contains sequences recorded from difl'erent mlgles.
* Bit rate indication
,, Choices for audio lauguage and souud mode
Yuu can select the desired audio language mid
sound mode, if different lmlguages and modes are
available on a disc.
EN
of
,, Automatic detection of discs
,, Still/fast/slow/step playback
Various playback modes are available including
still pictures, fast forward/reverse, slow motion and
step frames.
.Screeu
lock
,, DRC (Dynamic
You can control
-6-
range control)
the range of sound volume.
3 CONTROLS
AND FUNCTIONS
E NOTE
] • When you select DVD mode, press [PLAY 1>] or [EJECT
[,Otherwise,
the DVD features are not operated.
_]
]
first or insert a disc into the disc slot.
=REMOTE CONTROL
9.SETUP button (El2, E28)
Press to enter or exit the setup menu of TV/DVD.
10. TITLE button (El9)
Press to display the title menu.
11. CLEAR button (P.21)
Press to clear/cancel
a setting currently entered.
Press to clear "DISC INSIDE" display.
12. MODE button (P.24)
Press to call up the program/random
screen in
stop mode.
Press to call up the Black Level Setfing/Virtual
Surround screen during playback.
13. SEARCH MODE button (E21)
Press to locate a desired point.
14. AUDIO button
For TV mode (El4): Press to select TV sound
mode (STEREO/SAP/MONO).
For DVD mode (R25): Press to select a desired
audio Emguage (if available).
15. EJECT A button (E]8)
Press to remove a disc from the unit.
15
16
17
18
19
2O
21
22
7
23
24
25
8
9
10
11
26
12
28
16. SELECT button (El 1)
Press to select the TV mode, external input mode
or DVD mode.
13
14
29
30
17. CH. A/V
buttons (Ell)
Press to select memorized
27
18. VOL. A / V buttons (E ll)
Press to control the volume
and TV.
[Fig. 1]
I.POWER buttou (Ell, P.18)
Press to turn tile power on and off.
2.PICTURE button (El3)
Press to adjust the picture.
3.Number
buttons (El 1, R21)
Press to select a desired chmmel number directly.
+100 button (For TV mode)
Press to select channels higher than 99.
+10 button (For DVD mode)
Press to enter desired numbers higher than 9.
4.SLEEP button (El3)
Press to set the Sleep Timer.
5.SKIP I_1 / I_1_t buttons (R21)
Press once to skip chapters/tracks to a desired point.
&PLAY [2> button (RIB)
Press to playback the disc.
7.PAUSE III button (El9)
Press to pause the current disc operation.
8. DISPLAY button
For TV mode (El4):
Press to display the current channel number on
the TV screen.
For DVD mode (R27):
Press to display the current status on the TV screen.
chmmels.
level for the DVD
19. MUTE button (El 1)
Press to mute the sound or press it again to
restore sound.
20. ZOOM button (E20)
Press to enlarge the part of a DVD-reproduced
image.
21. REVOlt button (R20)
Press to view the DVD picture in fast/slow
reverse motion.
FWD _
button (R201
Press to view in fast/slow
tbrward motion.
22. STOP • button (ElS)
Press to stop operation of the disc.
23. DISC MENU button (Rig)
Calls up the DVD menu.
24. ENTER button (El2, E19)
Press to accept a setting.
25. • (Up) / • (Down) / _1 (Left) / I_ (Right) buttons
(El2, El9)
Press to select or adjust menu items.
-7-
EN
26. RETURN button (P22)
Press to return to the previous
29. REPEAT button (P.23)
Repeats playback of the current
chapter, group or track.
30. SUBTITLE button (P.25)
Press to select a desired subtitle
screen in the setup
menLi.
27. A-B button (R23)
Press to repeat the playback of a selected section.
28. ANGLE button (R26)
Press to change the camera angle to see file
sequence being played back flom a different angle
(if available).
disc, title,
hmguage.
- CONTROL PANEL
31. MENU button
31 323334 35
36 3738
Press to enter or exit the setup menu of TV/DVD.
32. STOP • button (RIB)
Press to stop operation of the disc.
33. PLAY _ button (P.18)
Press to playback of the disc.
34. EJECT A button
Press to remove
35. VOLUME V / A
Press to control
and TV.
(P.lg)
a disc from the unit.
buttons (Pl 1)
the volume level for the DVD
36. CHANNEL • / • buttons
Press to select memorized
(P.ll)
channels.
37. SELECT button (P.l1)
Press to select to TV mode, external
or DVD mode.
input mode
38. POWER button (P.ll, RIB)
Press to turn the power on and off.
39. Remote sensor window
[Fig. 2]
1
39
BATTERY
Open the battery compartment cover by
pressing the cover on the remote control unit
in the direction of the arrow.
2
Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by
the polarity (+/-) markings.
3
Replace the cover.
PRECA
UTIONS
,, Be sure to follow the correct polarity as indicated
in the battery compartment. Reversed batteries
may cause damage to the device.
,, Do not mix different types of batteries together
(e.g. Alkaline _md Carbon-Zinc) or old bmteries
with fresh ones.
,, If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
,, Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture.
NOTE
,, We do not recommend
the use of universal remote controls. Not all of the functions may be controlled
with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the m_mufacturer of the universal remote control.
EN
- 8-
FOR USE
] • Cables
],,For
ffNOTE
used
your
[,before
here
safety
moving
are
and
commercially
to avoid
available.
damages
to the unit,
unplug
the antenna
cable
from
the ANT
jack
]
the unit.
- ANTENNA/CABLE
CONNECTION
IF YOU HAVE A JACK ON THE WALL
Connect the TV to the wall-mounted tmtenna jack
with an RF cable (commercially available).
[Rear of d_is Ill/it]
IF YOU
Connect
HAVE
A WIRED
the TV to the wired
CABLE
antenna
cable.
_- NOTE
• Before plugging
unit, check
straighten
into the ANT.jack
flae pin as illustrated,
the ANT jack
fi'onl Cable
the antenna
of the
that the pin is not bent. If it is bent,
then plug flae pin into
of the unit.
Bent pin
TV signal
or Ai/tenlla
Plug
(Needs to be
straightened)
- CABLE/SATELLITE
(Straight
pin)
BOX CONNECTION
WHEN
BOX
USING
CABLE
BOX/SATELLITE
If your cable service supplies you with a convener
box or if you use a satellite system, you can use the
basic connection shown above.
Chamlel selection must be made with the converter
c:_,bl_Box
ol Salellhe
box or satellite
box.
This
means
that
chtmnels
cannot
Box
be changed
using
the remote
control
of this unit.
75 ohm
Coaxial Cable
h'om Cable Company
or Salellhe dish
I
NOTE
ote to CATV
This reminder
guidelines
system
system
installer:
is provided
for proper
of the buikting
to call the CATV system
grounding
and in particular,
installer's
specifies
as close to the point of cable entry
attention
to Article
that the cable ground
820-40
of the NEC that provides
shall be connected
to the grounding
as practical.
-9-
EN
You can connect
equipment.
this unit to your own Audio/Video
,, Be sure to turn off the power
the system before connecting
AUDIO
,, Refer to the Owner's Manuals
to be connected to the unit.
VIDEO2
--- NOTE
to all components
in
tmother componeut.
for the equipment
When you use the external input, select "VIDEO1" or
"VIDE02" by pressing [SELECT]. (Refer to page 11.)
• To use the VIDEO1 input jacks, select "VIDEO1 ".
,, To use the VIDEO2 input jacks, select "VIDEO2".
VIDEO1
_J
VIDEO1 INPUT
Audio
Cible
Use tiffs connection if your own A/V equipment (e.g.
VCR) has Video output and Audio out jacks. When
using S-Video cable, better picture is available.
'
_
Video OR
Cabh.'
Video C _sselte
S-Video Cable
(OUT)[
Recorder
1
_. NOTE
],, If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO Ljack of this unit.
[,, If you connect Videojack and S-VIDEO jack simultaneously,the S-VIDEO jack is given priority over the VIDEO jack.j
VIDEO2 INPUT
Use this connection if your own A/V equipment (e.g.
video camera, video game) has Component Video
output (_ Pb, Pr) jacks. You cml enjoy the best picture with this connection.
• L'X
Conlponenl
-AUDIO
Video Clble
(OUT)
Audio ('able
(OUT)
Video Camera
OUTPUT
To coaxial
You can enjoy DVD sound with more
presence by connecting digital audio
equipment
such as Dolby Digital decoder.
digital
audio input jack
Home Audio System
Dolby
Digital
decoder
NOTE
" Theaudiusourceon a discin a DolbyDigitalMulti-channel
surroundformatcaunutbe recurdedasdigitalsoundby anMDurDATdeck.
,, If connectedto a DolbyDigitaldecoder,set"DOLBYDIGITAL'
to "BITSTFIEAM"
foraudiooutputinthe setupmode.(Referto page29.)
,, Unlessconnectedto a Dolby Digital decoder set "DOLBYDIGITAl"to "PCM"for audio output in the setup mode.Playing
a unit using incorrectsettingsmay generatenoise distortionand may also damage the speakers.(Refer to page 29.)
Manufactured
are trademarks
EN
under license from Dolby Laboratories'
of Dolby Laboratories'
- 10 -
'Dolby'
and the double'D symbol
OPERATION AND SETTINGS
if)
Z
1
When you turn oll the power for the first time,
the SELECT LANGUAGE
screen is displayed.
Select the language for screen display and perform
auto programming
of the channels.
_.-
Press[POWER] to turn on the unit.
Z
<
NOTE
• If theTV screenshowssnow
...........
noise and there is no operation PLEASECH_CKTOSEEI_THE
for more than 5 seconds,
"HELPFUL HINTS" appears.
Follow the instructions listed on-screen.
After antenna or cable connection is
completed, connect the power cord
into a standard AC outlet.
Z
o
p-
p_OpERky......................
OONNECTED
2
DID
YOU
PERFORM
_
...........................
OWNERS
MANUAL
AUTO
OR
PRESET
OEAR
PANEL
OH
?
<
FOR
° .....................
• If those settingsdo not work properly,please call our
help line on the front page of this owner's manual.
f any digits are displayed in the comer of the
creem press [POWER] without unplugging
he power cord.
2
2
Press [POWER] to turn on the unit.
Press [CH. • / v] or the Number buttons
select the desired channel number.
to
(LTP__T3C.T3]
3 Press one of the keys listed
below to select the desired
language of on-screen menu.
• ENGLISH: [OH.•]
• ESPAIqOL: [CH. T]
• FRAN_AIS: [VOL. A]
4
NOTE
For channelnumberselectionwithnumberbuttons:
Confirm the antenna (or cable) I
...........
connection and press [ell: •]./_;_L_T_'y_",_%_
.......
Tile tune1, ctm. trod memorize. /
all active chtumels in your area. /
"
£
'
£
'
5 When the scanning is
completed, the tuner stops
on the lowest memorized
channel.
£
• To select single-digit channel number, press
[0] first. (e.g. Press [0] [2] for ch_mnel 2.)
• To select cable channels which are higher
than 99, press [+100/+10] first.
(e.g. Press [+1001+10] [2] [5] for channel 125.)
INORDERTOPER_ORM
Press [VOL./k/V]
ume level.
I_
(Example)
• If [MENU] is pressed during channel scanmng,
tile tuner stops scanning trod tile lowest memorized channel is displayed.
• The INITIAL SETUP menu is displayed
every time you turn on the unit unless the
scanning is completed.
• In case no channel can be
received by tile dlmmel scanning, "NO TV SIGNALS" is
..........
displayed on tile screen. Turn
off tile unit and check tile
antenna connection, then
follow steps 1 to 5 again.
• You can change the setting after completing
INITIAL SET UP by LANGUAGE
menu or
CHANNEL SET UP menu. (Refer to
"MENU LANGUAGE"
on page 16 or
"CHANNEL
SET UP" on page 12).
VOLt_M_
vol-
2O
llllllm.......
CH 15 ]
NOTE
to select the desired
• Press [MUTE] to insttmtly mute file sound.
Press it again to restore tile previous volume level.
NOTE
you press tell. • / _'] in tile DVD mode,
/you cml change tile TV channels. Even if you
|turn
off tile unit in tile DVD mode, when you
[,turn it on again, it will go into the TV mode.
]•If
TO WATCH
CABLE
OR SATELLITE
CHANNEL
If tile unit is connected to a cable box or satellite
box, press [CH. • / _'] to select CH3 or CH4
according to tile output channel setting of tile device
and select desired channel on that device.
TO WATCH EXTERNAL
INPUT
When tm extemal equipment is connected to
AUDIO/VIDEO input jacks on the right side, press
[SELECT] or [CH. • / _'] repeatedly
until
"VIDEO1" or "VIDEO2" appears on tlle screen.
' 11 =
EN
cf_x
ADDING/DELETING
A UTO CHANNEL
CHANNELS
The chtmnels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted chamlel into the memory again.)
PROGRAMMING
As the initial setting, this unit has memorized all
chtumels, including the ones not available in your
area. This feature automatically puts only available
chtmnels into the memory.
1
Press [SETUP] then press [A] or [v] to point
to "CHANNEL SET UP".
tu_
1
Press [SETUP] then press [A] or [v] to point
to "CHANNEL SET UP".
SETUP
_"
_
,\
j
SETUP
_
CHANIqEL SET UP
_
I_
I_
CAPTION........
[OFF][
.......
V-CH_PSET UP
]
I_ CHANNEL
V-CHIp
SET SET
Up UP
CAPTION
2 Press [ENTER] then press [M or [v] to point
to "ADD/DELETE CH".
[OFF]
BACK
u_Hr[sR_Hq
¢-b
CHANNEC SET UP
2 Press [ENTER] then press [•] or [v] to point
to "AUTO PRESET CH".
[_
3
_E_ENT_
I_
\ £_-3
/
£z3
I_
............
\
\
/
ADD/ OECETE OH (CATV)
i_
3
............
[
/
AUTO PRE_ET OH
Press [ENTER] then press the Number buttons or [CH. • / V] to select the desired
channel number.
Press [ENTER].
• The tuner scans and memorizes all the active
chamlels in your area.
• The tuner stops on the lowest memorized channel.
4
(- NOTE
I • When "AUTO
|where
there is
[SIGNAl"
will
,completion
of
PRESET CH" is activated
no TV signal input, "NO TV
appear on the display after the
channel scanning.
Press [ENTER] then the channel number
turned to red. The channel is deleted from
memory. If the channel number turned to
blue, the channel is added into memory.
•To delete another ch_mnel, repeat steps 3 to 4.
• If you press [ENTER] again, the channel is
memorized again.
• The unit may recognize CATV chtmnels to be
TV chamlels if reception condition is poor. In
this case, check the antenna connection and try
"AUTO PRESET CH" again when reception
conditions are better.
Added channel : Light blue
Deleted channel
: Light red
• Auto channel programming
is NOT necessary
when connected
to a cable box or satellite
box. Just select the channel for cable box or
satellite input (ex. CH3 or CH4) on the unit,
then select your desired channel on the cable
box or satellite box.
5 Press [SETUP] to exit the menu.
SETUP
• To confirm that channel(s) has(have) been
NOTE or added, press [OH. • / V].
deleted
EN
- 12-
1
1
I
Press [SETUP] then press [A] or [T] to point
to "BACK LIGHT".
- TV SET UP
_SKIP
_
ZOOM
MUTE
C_t Cut _t
[_
2
o,sP_¥
/
(5
Z
I-I'nl
Cf)
a
Z
LANGUAGE [OFF]
[ENGLISH]
CAPTION
BACK LIGHT [BRIGHT]
Press [ENTER] then press [_1] or [1_] to
select to "BRIGHT", "NORMAl" or "DARK".
\
Ct
$EARCHM3DE_REPD_T
AB
)
_o
/
3 Press [SETUP].
¢t
are used for following
_J
f_
operation.
The unit's picture controls, brightness, contrast,
color, tint and sharpness, are preset to factory speci-
The Sleep Timer function turns off the unit without
using [POWER]
after a desired period of time.
fications. Although they are usually the best, you
may need to make some further adjustments
for a
more natural looking image.
1
/
OHANNEL SETUP
V OHIP SET UP
Z
C _ C t Ct
buttons
"\
!R_TUR.
Ct
• Shaded
\
\
sEtuP Tm-E
\
CLEAR
SETUP
/
1
Press [SLEEP].
Press [PICTURE] then press [A] er [T] to select
the desired control "BRIGHTNESS", "CONTRAST',
"COLOR", "TINT' or "SHARPNESS".
\.
\
2 Press [SLEEP]
/
BRIGHTNESS
__
_HHHIHH_H+
2 Press [_1] or [1_] to adjust
level within 5 seconds.
repeatedly
to your desired
SLEEP
• Each press increases
to 90 minutes.
\
/
the time
After 5 seconds,
the Sleep
disappear
automatically.
BRIGHTNESS
to decrease
to increase
CONTRAST
brightness
to decrease
contrast
brightness
to increase
contrast
COLOR
to pale
to brilliant
TINT
SHARPNESS
to purple
to soft
to green
to clear
until the desired
sleep time is displayed.
If you
select
setting
is canceled.
"SLEEP
by
Timer
0 MINUTE",
10 minutes
setting
Sleep
up
will
Timer
• Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
V"NOTE
I"
The picture control displa)
L
cally after 10 seconds unless you press any buttons.
will disappear automati-
1
-13-
EN
,-- NOTE
"Even if there is a power failure of any
kind, the unit will retain its memory for
this feature.
You can view specially labeled (cc) TV programs,
movies, news and pre-recorded
tapes with either a
dialogue caption or text display.
CAPTION mode: You ctm watch dramas, movies _md
news while captioning the dialogues and the contents
of news.
TEXT mode: You can watch half screen text informa-
TO SELECT
tion if you want.
1-2: You may get these captions or text information
by selecting either "1" or "2". "2" is usually used for
a second l_mguage if available.
1
TV SOUND
[
J
MODE
Press [AUDIO] repeatedly to select the MTS
output mode.
NOTE
" Not all programs are broadcast with closed captions. Your unit is designed to provide error-free
closed captious from high quality _mtenna, cable
and VCR signals. Conversely, poor quality signals are likely to result in caption errors or no
captious at all. Common signal conditions which
may cause caption errors are listed below:
-- Automobile
ignition noise
-- Electric motor brash noise
• The output mode changes as described below
every time you press [AUDIO].
STEREO _
SAP* ._-
MONO
I
-- Weak snowy reception on TV screen
-- Multiplex signal reception displaying picture
ghosts or airplane flutter
,, If the unit displays a black box on the TV
screen, this metros that the unit is set to the
TEXT mode. To clear screen, select
"CAPTION1", "CAPTION2"
or "OFF".
* Second Audio Program
Sometimes
broadcasters
audio to the programs
(SAP):
add another
ch_mnel of
they air. This is usually
a
secondary language or perhaps a radio station.
• After 5 seconds, the current audio status will
disappear from the TV screen.
NOTE
• The initial setting is "STEREO".
]
,, This setting is saved even if the unit is turned
oft"or the AC cord is unplugged.
J
TO CHECK
1
Press [SETUP] then press [A] or [v] to point
to "CAPTION".
THE SOUND
STATUS
By pressing [DISPLAY], the status shown below
will appear on the display when you receive a broadcast on the unit tuner ch_mnel you are watching.
CH 123
SETUP
C--_
/
_
_
_'
CHAN*,_ELSeT uP
I_
I_
•
........
V_GHIp
_3)
*{E;qc- ,SH]
UP
CAPTION SET /OFF/
BACK L_GHT _B*q_GH]' 1
L
2
Press [ENTER] repeatedly to select the
desired caption menu "CAPTION1",
"CAPTION2", "TEXT1" or "TEXT2".
OHANNEL
SET
OAPTION SET
V.OHIp
BACK UGHT
1) When a program is broadcast in stereo,
"STEREO" appears on the TV screen.
2) When a program is broadcast in second audio,
"SAP" appears on the TV screen.
UP
{OAPTtONI
UP
[a_tGHr]
_2)
--l)
] .......
TV SET UP
" If you select "OFF", Closed Caption System setring is canceled.
3
EN
3) When a program broadcast both in stereo and second audio, "STEREO/SAP" appears on the TV
screen.
Press [SETUP] to exit the menu.
- 14 -
TV RATING SET UP
Follow steps 1 to 3 in the V-CHIP SET UP.
4 Press [A] or [v] to select the desired TV rating to be blocked then press [ENTER] repeatedly to set "BLOCK" or "VIEW".
/
\
@\
/
I_
C_D
TV Y
TV ¥7 (
)
TV_3
TV PG(
TV 14 (
TV_A(
)
)
)
¢/)
Z
pl=-
[VlSW]
[WEW]
[WEW]
[WSW]
[WSW]
[WEW]
¢0
Z
<
Shaded
buttons
are used for following
Rating Category Explanations
Appropriate for all children
Appropriate for children seven and older
Geueral Audience
TV-PG
TV-14
Parental Guidance suggested.
Unsuitable for children under 14
TV-MA
Mature audience only
operation.
Selection
TV-Y
TV-Y7
TV-G
SETUP
j
_
"_\
j
SET
TV Y7 (
)
_,- TV_
TV4_G (DLSV)
TV
2
5
]C42d55_C_1
,, For the first time set-up or in the event the unit
has lost power, enter the default code of 0000.
"MPAA RATING" or "CHANGE CODE" then
\.
/
TV RATING:
[BLOCK]
[BLOCK]
Rating Category
FV
Fantasy Violence
TV-PG, TV-14, TV-MA
D
Suggestive Dialog
L
Coarse Language
S
Sexual Situation
V
Violence
press [ENTER].
/
(LSV)
[v_w]
[BLOCK]
[BLOCK]
When you select the ratings of TV-Y7, TV-PG,
TV-14 or TV-MA you will have the option of
setting sub rating categories.
Press [A] or [v] to select a rating with subratings you wish to block, then press
[ENTER] twice.
Press [A] or [v] to select a sub-rating, then
press [ENTER] to set it to "BLOCK" or "VIEW".
Selection
TV-Y7
3 Press [A] or [v] to select "TV RATING",
i_
tal
m
• When you set the lowest mfing to "VIEW", all
other ratings will automatically be available
for viewing.
[BRIGHT]
Press [ENTER] then press the Number
Buttons to enter the access code.
..........
14 (DLSV}
TV_dA
CAPTION
v CH_P SET[OFF]
UP
L_GHT
n-
Up-
CHANNEL SET UP
SACK
D-
,, When you select a rating trod set it to
"BLOCK", the higher rmings will be blocked
automatically. The lower ratings will be available for viewing.
Press [SETUP] then press [A] or [v] to point
to "V-CHIP SET UP".
- TV
o
,-- NOTE
V-CHIP
SET UP
This feature enables parents to prevem their children
from watching inappropriate material on TV. When
you try to access a program which is blocked, "PROTECTED PROGRAM by ..." messageappearson
the TV screen.
1
Z
TV RATING
..........
Explanations
(TV-PG, TV-14 only)
See [] TV RATING SET UP
MPAA RATING: See [] MPAARATINGSETUP
CHANGE CODE: See [] CHANGE
ACCESSCODE
[-The blocked sub-ratings will appear next to
/the
rating category in the "TV RATING"
_-. NOTE
_
- 15 -
]
menl.i.
EN
6
Press [SETUP] to exit the menu.
,, Make sure you enter exactly the same new code
in the "CONFIRM CODE" space as one in the
"NEW CODE" space. If they are different, the
"NEW CODE" space is cleared for redoing.
SETUP
NOTE
5 Press [SETUP] to exit the menu.
,, To chtmge the rating, the TV must be turned
to an unprotected program. If "PROTECTED
PROGRAM by ..." appears on the screen,
please change the channel to a station that is
not protected.
[]
MPAA RATING
SETUP
NOTE
• Your personal access code will be erased _md
will return to the default (0000) when a
power failure occurs or when you turn off the
power using a wall switch. If you have forgotten the code, unplug the power cord for 10
seconds to restore the access code to 0000.
SET UP
Follow steps 1 to 3 in the V-CHIP SET UP on page
15.
4 Press [A] or [v] to point to your desired item,
then press [ENTER] to select "BLOCK" or
"VI EW".
1
/
\
_ _3
I_
NC
Press [SETUP] then press [A] or [v] to point
to "LANGUAGE".
[wEw]
[wEw]
-TVSETUP-
17
/BLOCK]
IBLOCK]
X
[BLOoq[WEW]
/
{_
Selection
G
Rating Category
General Audience
PG
PG- 13
Parental Guidance suggested
Unsuitable for children under
R
NC-17
Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted
X
Mature
audience
13
\
/
_ LANGUAG_ENGLISH]
CAPTION
[_F_
BACKUGHT[_R_GHT]
only
Press [ENTER] repeatedly to select
"ENGLISH", "ESPANOE'= Spanish or
"FRAN(_AIS"= French.
3
Press [SETUP] to exit the menu.
......
-- NOTE
,, This ffmction effects only the ltmguage on the
screen menu and not the audio source.
,, If for some reason the menu is in Spanish or
French, press [SETUP], press [A] or [_'] to
point to "IDIOMA [ESPANOL]" or "LANGAGE [FRAN(_AIS]', then press [ENTER]
repeatedly to select desired language, then
press [SETUP].
CODE
Follow steps 1 to 3 in the V-CHIP SET UP on page
15.
Press the Number buttons to enter your
desired access code in the "NEW CODE"
space, then enter the same code in the
"CONFIRM CODE" space. When completed,
the menu will return to "V-CHIP SET UP".
NEW O00E
{C_T2
(_T2(_g2[
tC_2C_-JC_JI _
EN
\
2
SETUP
4
/
C_
5 Press [SETUP] to exit the menu.
ACCESS
SETUP
Explanations
,, When you select a rating and set it to "BLOCK",
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
,, When you set the lowest rating to "VIEW", all other
ratings will automatically be available for viewing.
CHANGE
C-) '_
CHANNELSETUP
- 16 -
IT THE DISCS
Playable
discs
Mark(logo)
Regi
....
de
Recorded
signals
Disc type
il Disc size
DVD-Video
* 1,2,4,6,1O,ll
DVD-RW
DVD-R
Digital video
(MPEG2)
* 1,3,4,5,
617,9,1o
DVD+RW
DVD+R
* 1,3,4,5,
6,8,9,10
Audio CD
n .......
* 4 5 10
,
;;
_J0_[_
,
#leltAL
--
Digital
audio
;;
_Oal8
,
CD-RW
CD-R
*456910
5 inches
n .......
n ......
_J0_
_
_J0_[_
_
n ......
n .....
isa trademark of DVD
_
Example
(12cm)
Di_,ital audio
_ or
::
::
MP3
MP3
::
::
J Example
•
Group 1
_1_ Group2
2oo_
t IT_o_
_I_4 J_°_447_
_IJ_
Format/Logo LicensingCorporation.
If vou cannot play back a disc which bears one of the marks above, check the following notes.
*] : This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.
*3: Discs recorded in the VR (Video Recording)
format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible
recording conditions, characteristics
of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized
discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*7: Youmay play back the unfinalized DVD-R/RW disc recorded in the video Ibmmt on our brm)d's DVD recorder. However depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized cml be played back.
Unfinalized
discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
*9: Ifthere istoo much recording space left on a disc (the used pollion is less titan 2-3/1(_
'' (55ram) across), it may nut play,back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.
* 11 : The number inside the symbol refers to a region of the world and a disc encoded in a specific region format c_m only be played back on unit with the same region code.
,, NEVER play back the following discs. Otherwise,
the unit may result in malfunction.
DVD-RAM
/ CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM
for personal computers / CD-ROM for personal computers
,, Never insert a disc which is broken or whose form is abnormal
(other than 5 inch (12cm)
® On the following disc, the sound MAY NOT be heard.
Super Audio CD
ll 3 the sound recorded on the normal CD layer can be delivered.
e sound recorded on the high density Super Audio CD layer cannot
• Any other discs
without compatit)ilitv
round
disc).
be delivered.
indications
- 17 -
EN
cat)
O
121
I£1
I-1-21
3 A DISC
_SKIP_
,, Shaded
GETTING
ZOOM
buttons
NOTE
• When tile DVD mode has been switched to the
TV mode, the DVD mode shuts down first mid
then the TV picture and sound appears in about
4 seconds. Similarly, when [POWER] is
pressed to turn off in the DVD mode, this mode
shuts down first guld then the unit is turned off.
MUTE
are used for following
,, "(_)" may appear at the top-right on the TV
screen during operation, warning that a prohinted operation has been encountered
by the
DVD or the disc.
,_ With DVDs that use titles for playback program signals, playback may stari from the
second title or it may skip these titles.
• During the playback of a two layered disc,
pictures may stop for a moment. This happens
when the I st layer switches to the 2nd layer.
This is not a malfunction.
operation.
MP3PLArBACK
STARTED
YDVa£ 6Bj
Turn on the power
nents, if necessary.
1 Press
of amplifier
[POWER]
1 In stop mode, press
[A] or [V] to select
and _my other compo-
J NF3j
[DISC
MENU],
the desired
then press
group or track.
FIL_7
LIST
then the power will turn on.
mMP_
_
C_b
_
C*_
E_I
_ld_rn_m_ 2
fdde
naF_e
4
file n_ffre 1
m_ld_rn_
3
2 Open the disc door manually.
3
* If a group is selected, press [1_] or [ENTER] to go
on to the track selection screen. Press ['_] to go
back to previous screen.(except for the top page.)
* If a track is selected, press [ENTER] to start
playing tracks. Starting from the one you've just
chosen the subsequent tracks will be played.
®If the entire file list cmmot be displayed at once
on a screen, "_" appears to go to the next page.
,_Press [TITLE] to return to the top file of the
highest hieramhy in the program _md file list.
Inserta disc with the label facing back of the unit to
start playingit. By simply placingthe disc gently into
the slot, it will be loaded automatically.
2
Press [STOP II]
to stop playback.
NOTE
,_Playback will start fi'om the first chapter/track of the disc.
,_If the playback does not start automatically,
press [PLAY D].
* When you playback a DVD which features a
title menu, it may appear on the screen. In this
case, refer to "TITLE MENU" on page 19.
4 Press
[STOP II] to stop playback.
5 Press [EJECT A] to remove the disc from the unit.
EJECT
EN
- 18-
•
•
•
•
Polders are known as Groups; files are known as Tracks.
MP3 files are accompanied
by [] icon.
Maximum of 255 folders c_m be recognized.
Maximum of 999 files czm be recognized.
Up to 8 hierarchies c_m be created.
This unit recommends
the use of tiles recorded
at the below specifications:
Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 32kbps _ 320kbps
For MP3 file recorded in Variable Bit Rate (VBR),
the unit may not display the actual elapsed time.
1 Press [DISC MENU].
1 During playback, press [STOP m].
MENU
DISC
• The DVD main menu will appear.
• If the feature is not available, @ symbol may
appear on the TV screen.
• If disc menu is available on the disc, audio language, subtitle options, chapters for the title and
other options will appear for selection.
• Resume message will appear on the TV screen.
2 Press [j.], iv], ['_1 or [_] to select an item
and press [ENTER] to confirm selection.
\
Press
[PLAY D], playback
will resume
from
the point at which playback was stepped.
/
• To cmlcel resume, press [STOP m] twice.
®For MP3, playback will resume from the beginning of the current track.
,_The resume information stays on even when the
power is turned off.
1 Press [TITLE].
Paj
• The title menu will appeal:
• If the feature is not available,
appear on the TV screen.
1 During playback, press [PAUSE 11].
@ symbol may
2 Press [_.], ['v], [-_] or [1_] to select an item
then press [ENTER] to confirm selection.
• Playback will pause and sound will be muted.
2 To continue playback, press [PLAY C>1.
\
/
o
CALLING
DURING
UP A MENU
PLAYBACK
Or)
a
SCREEN
Z
Press [DISC MENU] to call up the DVD menu or
press [TITLE] to call up the title menu.
During playback, press [PAUSE ill.
[ • Contents of menu and correspondhlg
menu
[ operations may vary between discs. Refer to
cNOTE
)
[ the manual accomp_mying the disc for details.
CilD
PAUSE
• Playback will pause and sound will be muted.
The disc goes brward
by one frame each
time [PAUSE 11] is pressed.
To exit step by step playback, press [PLAY D].
- 19-
EN
1 During playback, press [FWD _]
[REV _-_].
The Zoom funcfion allows you to enlarge the video
hnage and to p_m through the enlarged hnage.
or
1 Press [ZOOM] during playback.
•"_
• Playback
1" or "_-_ 1" appears on the screen.
2
2 To select another speed, repeat step 1 until
your required speed number appears on the
screen.
• For DVDs, fast forward/reverse search speed is
different depending on the disc. Approximate
speed is l(x2), 2(x8), 3(x20), 4(x50) and
5(x 100).
• For Audio CDs and CD-RW/-R with MP3 files,
approximate speed is l(x2), 2(x8) and 3(x30).
3 To return
will continue.
Press [ZOOM] repeatedly to select the
required zoom factor: ZOOM1, ZOOM2,
ZOOM3 or OFF.
3 Press [j,],
[_'], [_1] or [_l to move the
zoomed picture across the screen.
\
to normal playback, press [PLAY L>].
/
c-,)
4
To exit zoom mode, press [ZOOM] to OFF.
ZOOM
NOTE
• Zoomh'lg function does not work while disc
menu is shown.
• Zooming function is not available on some
discs.
• It may take several seconds to slide the
zoomed picture.
• The picture may be distorted if you operate
other funcfions repeatedly (ex. [PAUSE | |] or
[REV -',9-_1],etc.) in the zoom mode.
1 During playback, press [PAUSE |1].
PAUSE
2 Press [FWD P.-_,_]or [REV _-_].
* "I_
1" o1"" "11111"appears on the screen.
3 To select another speed, repeat step 2 until
your required speed number appears on the
screen.
,, Slow- forward or reverse speed varies with the
disc. Approximate speed is 1(1/16), 2(1/8) and
3(1/2).
4 To return to normal playback, press [PLAY L>].
EN
- 20 -
FUNCTION
2 Within 30 seconds, select the desired track
number using the Number buttons.
ECab
SLEEP
_SKIP
I
+100
_
ZOOM
MUTE
* To select single-digit track number, press [0]
first if the total number of track in the disc is 10
or morn. (e.g. Press [0] [3] for track number 3.)
,, Playback will stml at the selected track.
During playback, press [SKIP _1] to move the next
track. Press it repeatedly to skip subsequent tracks.
Press [SKIP I_1"_]to go back to beginning of the current track. Press it repeatedly to go to the previous
tracks.
* If [SKIP 1_1"9/ _'_1] is pressed while the playback is paused, the playback will be paused
again after skipping to the next track.
C-_
SETUP
TrrLE
_,
/RETURN
C-_ C-b Cv_
CLEAn
S_RCH_:_EREPEAT
A-[_D
C-b C-b
• Shaded
buttons
are used for following
operafion.
I • [SKIP I'q_ /_1]
are not operative when
J M MP'3j uNOTE
LPlayback
is stopped.
1
Z
O
I-
o
Thele guethlee ways to begin playback on gulAudio CD guld
CD-RW/-R with MP3 files at a specifictrack.
Z
ii
"1-
1 Press the Number buttons
desired track number.
o
n"
to enter the
nl
Press [SEARCH MODE[ once for the Chapter
search, twice for the Title search during playback.
o
Or)
121
[_p
,, Playback will start at the selected track.
®To select single-digit track number, press single
number. (e.g. Press [31 for track number 3.)
®To select track numbers which am higher than 9,
press [+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for track number
25.)
C_2
SEARCHMOOE
®The track search display
C7__ once
SD_CHMODE
_2
1
Within 30 seconds, enter the desired chapter/
title number using the Number buttons.
@
* Playback will stag at the selected chapter or
title.
* Press [CLEARI to erase the incorrect input.
,, To select single-digit chapter/title number, press
[0] first if the total number of chapter/title in the
disc 10 or more. (e.g. Press [0] [2] for
cfiapter/fitle 2.)
1 Press [SEARCH MODE[.
{_C)
:D
appears.
- 21 -
EN
YAD W
Use markers to memorize your favorite places on a disc.
1 During playback, press [SEARCH MODE]
repeatedly to display the Time Search on the
TV screen.
_-_
repeatedly!l,/_
1 Press [SEARCH MODE] repeatedly during
playback to display the Marker screen.
................
C-_
2 Within 30 seconds, enter a desired disc time
repeatedly n!_ ___._7
2 Press [_] or [_] to select 1, 2, 3, 4, 5, 6, 7,
8, 9, or 10 and ensure that"_ _ _ _ : _ _ : _ _"
appears in the display.
using the Number buttons.
___ LT3
"RANDOM" screen appears.
_T3
/
@>
\
2 Press [PLAY l;>] to start random playback.
/
Press [CLEAR] to erasethe most recently
entered track.
®If the entire Program c_mnot be displayed at
once on a screen, "1_,-I" appears to go to the next
page m_d "1_11_11"
appears to go back to the previous page.
While an MP3 folder is open:
®Press [ _I_] when you want tu go to the next
hierarchy.
* Press ['_1] when you want to go back to the
previous hierarchy.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4 Press [PLAY L>] to play the programmed tracks.
NOTE
®While the program is being played back,
pressing [STOP will works as follows.
• Press [STOP II] once and then [PLAY [;>]
again, playback will restart from the point
where [STOP Ill] was pressed. (Program continued)
• Press [STOP m] twice _md then [PLAY D]
again, playback will restart from the track in
the usual way. (Program canceled)
• Up to 99 tracks can be entered.
• To erase all tracks in the program at once, select
"ALL CLEAR" at the bottom of the list at step 2.
,, If you like to repeat the current track in the
pr(_ram, press [REPEAT] several times until
"_l_dTRACK" appears during playback. If you
like to repeat the entire program press
[REPEAT] several times until "[_] ALl"
appears during playback.
EN
- 24 -
NOTE
,, If you like to repeat the current track in the random selection, press [REPEAT] several times
until "[_ TRACK" appears during playback. [f
you like to repeat the entire random selection
press [REPEAT] several times until "[_ ALl"
appears during playback.
THE SETTINGS
s_P
CLEAR
T_LE
\
/REAR,
SD_RCHMODE_EPE,_T
MODE
• Shaded
AUDIO
buttons
SUBTI]I_E
_,LB i
The unit allows you to select a language during DVD
disc (if multi languages are available) playback.
ANGLF
are used for following
operation,
1 Press [AUDIO] during playback.
! __U_i_
The unit allows you to select a language for subtitles
during DVD disc (if available) playback.
O
t/ ...................................................................................................................
_.
_
.......
........
2 Press [AUDIO] repeatedly to select your
desired language.
Or)
Z
C_
E
1 Press [SUBTITLE] during playback.
SUBTITLE
_
i _e,;_
lal
if)
lal
"1I--
_-= NOTE
I.Pressing [AUDIO] ma3 not work on some
[DVDs
with multiple audio languages (e.g.
[DVDs
which allow audio language setting on
_']
J_
Z
• The subtitle language will appear on the display
bar at the top of the TV screen.
Lthe
disc menu).
Z
2 Press [SUBTITLE] repeatedly to select your
desired subtitle language.
O
Z
SUBTITLE
O
I-
3 To turn
off subtitles, press [SUBTITLE]
repeatedly until "OFF" appears.
SUBTITLE
o
1 Press [AUDIO] repeatedly during playback to
select between "STEREO", "L-ch" or "R-ch".
Z
I.I.
o
NOTE
_
Pressing [SUBTITLE] may not work on
some DVDs with multiple subtitle languages.
In this case, set it on the disc menu.
(Operation varies between discs. Refer to the
manual of the disc.)
• If the desired language is not shown after
pressing [SUBTITLE] several times, the disc
does not have subtitles in that language.
• When "NOT AVAILABLE" appears on the TV
screen, it means no subtitle is recorded on the
!_u_,_U_Z)
° x---f......... __..
--
lab
STERE() :Both right and left channels are active
L-ch :
R-ch :
(stereo)
Only left channel is active
Only right channel is active
.-I
scelle,
®If you choose a language that has a 3 letter
language code, the code will be displayed
every time you change the Subtitle language
setting. If you choose any other languages,
"---" will be displayed instead. (Refer to page
31.)
- 25 -
_.1
EN
JJLM MP'3j
Some DVD discs contain
scenes which have been shot
simultaneously
from various angles. Yon cm_ change
the camera angle when tile "{_" icon appears on the
screen.
Yon cgm enjoy surround-sound
ers on this unit.
effect over two speak-
1 Press [MODE] repeatedly during playback
then press [ENTER] to set it "1", "2" or "OFF".
1 Press [ANGLE] during playback.
_OD_repeatedly
=1__
L_
• The selected angle will be displayed on the display bar at the top of the screen.
Natural effect
2:
Emphasized effect
OFF: Original Sound
,, If the "ANGLE ICON" setting is "OFF" in tile
"OTHERS" menu, the "_" icon will not
appear. (Refer to page 30.)
2 Press [ANGLE]
desired angle.
l:
.................
2 Press [MODE] to exit.
repeatedly to select your
• Yon can also exit the menu by pressing
[RETURN].
--- NOTE
For CD play only:
_,Villual Surround will not be effective if tile
sound mode is set to something other than
"STEREO". (Refer to "STERE() SOUND
MODE" on page 25.)
Adjust the Black Level Settings
parts of the picture brighter.
to make
tile black
1 Press [MODE] during playback then press
[ENTER] to switch "ON" or "OFF".
ON: Makes tile dark palls brighter.
OFF: Shows the original picture as recorded.
(]Initial setting)
2 Press
[MODE] twice or [RETURN]
_twme
MODE
.
to exit.
OR RETURN
@
-"- NOTE
* The setting will be saved even if the unit
turned off.
EN
is
"l
/
J
- 26 -
ON-SCREEN
Dispa¥
/
INFORMATION
\
Press [DISPLAY] again to show current Total
Track.
ALL:
I
® Shaded
You can
buttons
check
are used for following
the information
about
tile
......
_
Currenttrack number/ Totaltracks
operation.
current
whenthe repeatsettingis active
T: Trackrepeat
cA: AllTracksrepeat
A=B:
A-B repeat
Currentrepeatsettingappearsonly
Remainingtime of the entiredisc
Elapsedtime of the entiredisc
disc
by pressing [DISPLAY].
Fo,vvv-v,
3
Press [DISPLAY] again to exit.
1 Press [DISPLAY] during playback to show
current Chapter.
Angle icon,appearsonly whenavail[_able
Z
O
on the DVD
i
:
rllr_Current
playbackstatus
_
Remainingtime of the currentchapter
i
i
_CH(Chapter):
Elapsedtime of thecurrentchapter
I • When 3ou are pin3 ing a disc in PROGRAM
|or
RANDOM mode, "_ PROGRAM" (or
r__ NOTE
:
L"RANDOM')
will be displayed at step 2.
]
Z
Currentchapternumber/Totalchapters
_l_3J
For MP3
2 Press [DISPLAY] again to show current Title.
O
Z
LIJ
ILl
O
1 Press [DISPLAY] during playback.
Remainingtime of the currenttitle
Z
:
Elapsedtime ofthe currenttitle
TT(Title):
Currenttitle number/Total titles
3
O
Ir,_--Current playbackstatus
........
I
..r
;llrbna_iiep?_2_.filecurrentlyin play
Press [DISPLAY] again.
o3
Press [DISPLAY] again.
_'a _[_
_
1_
I
Layernumbers,appearsonlywhen
playinga two-layeredDisc
L0: Layer0 is playing
II_ v3:.0:o_:_5
_
I _
I v
LI: Layer1 is playing
'Currentrepeatsettingappearsonly
whenthe repeatsettingis active
C: Chapterrepeat/ = T:Title repeat/
A=B: A-B repeat
4 Press
_Elapsed
[DISPLAY] again to exit.
i
w
o3
_T: Trackrepeat
G:Group (folder)repeat
A: Discrepeat
playingtime of the current
track
_
3
'BIT RATE:The amountof audioand
video datacurrentlybeing read
z
TR(Track):
:T. ,-'_ Currenttrack number/ Totaltracks
_Current
repeatsetting,if active
"r
Z
i
Press [DISPLAY] again to show the
current playback mode.
(Only
Whell
you
are
playil/g
a disc
ill
PROGRAM
Z
or
RANDOM mode.)
or
For Audio
CDs
_G_I
4 Press [DISPLAY] again to exit.
1 Press [DISPLAY] during playback to show the
current Track.
:
11_4/12,.O:03:21;0:02:15._T
]___
I
=
_TR(Traok):
_
_
Currentplaybackstatus
[
Remainingtime of the currenttrack
Elapsedtime of the currenttrack
Currenttrack number/ Totaltracks
- 27 -
EN
31NG THE DVD SET UP ITEMS
QUICK
MENU
LANGUAGE
"TV MODE" or "DOLBY
DIGITAl" from the QUICK menu quickly. To
access tile QUICK menu, select "QUICK"
instead of "CUSTOM" at step 1 •
®
SETTING
You can select the
Follow steps I to 2 in the
_y_,,
,_'
.
3 Press [_,] or [V] to select the desired
then press [ENTER].
TV SET UP MENU IN DVD MODE
•
You can access the TV SETUP menu by pressing [SETUP] from the DVD mode, and select
only "LANGUAGE" and "BACK LIGHT".
[_
/
\
\
/
I_
item
_o_,_,._L
I
_,SOME_U
E_L,SB
_L..*_E_
SUBTITLE
OFF
AUDIO:
Sets the audio hmguage.
SUBTITLE:
Sets the subtitle hmguage.
DISC MENU: Sets the l_mguage for DVD menu.
SEeP T_LE
\
/_UB.
U2__
U-)
4 Press [a,] or [T] to select a setting then press
[ENTER].
@
®Shaded buttons are used for following operation.
You can chgmge the DVD player's settings.
1 In stop mode, press [SETUP] twice, [T] to
select "CUSTOM" then press [ENTER].
®If "OTHER" is selected on the "AUDIO',
"SUBTITLE" or "DISC MENU" screen, press
four-digit number to enter the code for the
desired language. (Refer to page 31 .)
• If the menu does not appear, press [PLAY L>]/
first, then press [STOP m]. Make sure the
[
disc is in stop mode, then slowly press
]
[SETUP] twice.
,, Only the languagessupportedby the disc can be selected.
5 Press [SETUP] to exit the menu.
(-_
J
SETUP
NOTE
2 Press [A] or [v] to select the desired item
then press [ENTER] to confirm.
Language Setting for Audio and Subtitle are
not valid for some discs due to default setting
of the disc. In this case, set them by pressing
[AUDIO] and [SUBTITLE]. (Refer to page
25.)
,, If you select a language that is not supported
by the disc, subtitle will automatically be set
OFF m_d the first item of the audio hmguages
will be automatically set.
/
IIi_#_,,_s_°_
_
].[_
C;3
Refer to the pages below to set up each item.
LANGUAGE: See _ LANGUAGE SETTING
DISPLAY:
See [] DISPLAY SETTING
AUDIO:
See [_AUDIO
SETTINGS
EN
]
FRENCH
SPANISH
NOTE
PARENTAL:
OTHERS:
_
SETUP
twice,*.
,.,,._q
SETUP
See _PARENTAL
CONTROL
See [] OTHER SETTINGS
_DISPLAY
SETTING
Follow steps 1 to 2 in the
- 28 -
_
_;',__ _
DRC (Dynamic Range Control):
3 Press [a,] or [T] to select the below items then
press [ENTER].
_-_
sETuP
\°
Lwb
-
MODE
®To compress the r_mge of soft tu loud sound.
* The default setting is "ON".
DOWN SAMPLING:
TV MODE:
You can chgmge celtain aspects of the DVD display
screens
guld on-screen
messages on the TV screen.
DRC
_00_
NNsETUP
ON
I DOL_D,_,_L
_ITET_EAM
L
4:_LETTER
BOXi
• ON : Output in 48 kHz. (default)
- OFF : Output the original sound.
When playing disc with copyright protection
• If you select "OFF", copyright protection will be
actiwtted _md sound will be down sampled at
48kHz,
uT°
......
• 4:3 LETTER BOX (default): To show black bars
on top and bottom of the screen.
• 4:3 PAN & SCAN: To show a full height picture
with both sides trimmed.
DOLBY DIGITAL:
Set to "BITSTREAM" when the unit is connected
STILL MODE:
This function allows you to adjust picture resolution grad quality in the still mode.
to a Dolby Digital Decoder.
SETUp
TV MODE
DRC
DOWNSAMPLING
4:3 LETTERBOX
_
ON
ON
BITSTREAM
AUTO
• AUT() (default): Automatically select the best
resolution setting (FRAME or FIELD) based on
the data characteristics of the pictures.
®FIELD: Select "FIELD" when the pictures are
still unstable even if "AUTO" is selected.
FIELD stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data.
- FRAME: Select "FRAME" to display relatively
motionless pictures in higher resolution.
FRAME improves the picture quality, although it
may unstabilize the pictures due to simultaneous
output of two field data.
4 Press [SETUP] to exit the menu.
- BITSTREAM: Output a Dolby Digital signal (default)
- PCM:
Convert the Dolby Digital to PCM
(2 channel stere())
I-ILl
€/)
121
SETUP
PARENTAL
121
ILl
CONTROL
Parental Control limits the discs viewing that exceed
your setting (with a password or playback will stop).
This feature allows you to prevent discs with alternative scenes from being played by your children.
AUDIO SETTINGS
Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD
discs.
Follow steps 1 to 2 in the
page 28.
on
Follow steps 1 to 2 in the
page 28.
_ _,'_i_i_;_;_
_ on
3 Enter your four-digit password then press
[ENTER].
[
:3 Press [M or [T] to select the below items then
(LTPLTPLW2)
press [ENTER].
\
\
• Press [4], [7], [31, [7] then enter your password
if you forget the password.
/
q;-)
ILl
4 Press [SETUP] to exit the menu.
PARENTAL LEVEL
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc's ratings exceed the level you set.
SETUp
€/)
- 29-
EN
I-Z
Z
ANGLE ICON:
®Press [ENTER] repeatedly to turn Angle icon
"ON" or "OFF".
®The default setting is "ON".
SCREEN SAVER:
,, Press [ENTER] repeatedly to turn Scmen Saver
"ON" or "OFF".
®The default setting is "OFF".
4 Press [_] or ['v] to select "PARENTAL LEVEl"
then press [ENTER].
/
\
_
ALL
5 Press [A] or [T] to select the desired
then press [ENTER].
/
level
®If you select "ON", the screen saver program
star*,swhen them is no input from the unit for 5
minutes in stop mode.
\
@\
/'_
4
Press
6 Press [SETUP] to exit the menu.
[SETUP]
to exit the menu.
SETUP
SETUP
NOTE
This allows you to return all selections of SETUP
(except fur "PARENTAl"
and menu language)
to
their default settings.
,, When doing this for the first time, enter _my 4
digits. (except for 4737) That number will be
used as the password. (in the event you forget
the password, see below)
* To change the password, press [_,] or [V] to
select "PASSWORD
CHANGE" at step 4
then press [ENTER]. Enter the four-digit
password, then press [ENTER].
,, With some DVDs, it may be difficult to find
if they am compatible with parental control.
Be sure to check if the parental control function operates in the way that you have set.
* Record the password in case you forget it.
1 Press [SETUP] twice in stop mode so that the
"INITIALIZE" menu appears.
SETUP
twice
2
/
CONTROL LEVELS
®ALL
All parental controls are c_mceled.
• Level 8
DVD soflwam of any grade (adult/general/chiklmn)
can be played back.
• Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
® Level 1
Only DVD software intended for children can be
played back, with those intended for adult and general use prohibited.
OTHER
3
_:_
....
\
EN
twice
All the settings (except for "PARENTAl" grad
menu language) will be cleamd.
* To c_mcel the initialization, select "NO".
4 Press [SETUP] to exit the menu.
on
ON
/
C;;-)
/
d_b
eo_
....
\
\
_\
Press [,_] or ['v] to select the below items then
press [ENTER].
q,,-)
Press [A] or [_'] to select "YES" then press
[ENTER] twice.
[_3
_J
\
/
SETTINGS
Follow steps 1 to 2 in the
page 28.
3
Press [a,] or [T] to select "INITIALIZE" then
press [ENTER].
J--- ...........
- 30 -
SETUP
Language
Language
Code
Language
Code
Language
Abkhazian
Afar
Afrikaans
Code
4748
4747
4752
Finnish
French
Frisian
Galician
5255
5264
5271
5358
Lingala
Lithuanian
Macedonian
Malagasy
5860
5866
5957
5953
Shona
Sindhi
Singhalese
Siswat
Code
6560
6550
6555
6565
Albanian
Amharic
Arabic
Armenian
Assamese
8583
4759
4784
5471
4785
Georgian
German
[GER]
Greek
[GRE]
Greenlandic
Guarani
5747
5051
5158
5758
5360
Malay
Malayalam
Maltese
Maori
Marathi
5965
5958
5966
5955
5964
SIovak
SIovenian
Somali
Spanish
Sundanese
6557
6558
6561
5165
6567
Aymara
4771
Gujarati
5367
Moldavian
5961
SwaMi
Azerbaijani
Bashkir
4772
4847
Hausa
Hebrew
5447
5589
Mongolian
Nauru
5960
6047
Swedish
Basque
Bengali;Bangla
Bhutani
5167
4860
5072
Hindi
Hungarian
5455
5467
Nepali
Norwegian
6051
6061
Tagalog
Tajik
Tamil
6658
6653
6647
Bihari
Bislama
4854
4855
Icelandic
Indonesian
5565
5560
Occitan
Oriya
6149
6164
Breton
4864
Interlingua
5547
Oromo(Afan)
6159
Bulgarian
Burmese
Byelor
ussian
4853
5971
4851
5759
4947
Interlingue
Inupiak
Irish
[IRI]
Italian
[ITA]
Japanese
[JPN]
Javanese
5551
5557
5347
5566
5647
5689
Panjabi
Pashto;Pushto
Persian
Polish
[POLl
Portuguese
Quechua
6247
6265
5247
6258
6266
6367
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
6866
6651
6654
4861
6655
6661
6865
6664
6657
6669
7254
4961
5464
4965
5047
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
5760
5765
5757
6469
5771
Rhaeto-Romance
Romanian
[RUM]
Russian
[RUS]
S
Samoan
6459
6461
6467
6058
5160
5161
5166
Kirundi
Korean
Kurdish
6460
5761
5767
A-B
C=E
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
[CHI]
[CZE]
[DAN]
Dutch
[DUT]
English
[ENG]
Esperanto
Estonian
[FIN]
[FRE]
[HUN]
I-K
[ICE]
[KOR]
Faroese
5261
Laothian
Latin
Fiji
5258
Latvian;Lettish
[POR]
5861
5847
Sangho
Sanskrit
Scots
Gaelic
Serbian
Serbo-Croatian
Sesotho
5888
Setswana
L=N
F-H
[NOR]
O-R
[SPA]
6569
[SWE]
6568
T
[TUR]
U=Z
6559
Ukrainian
Urdu
Uzbek
Vietnamese
6757
6764
6772
6855
6553
6547
5350
6564
6554
6566
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
6861
4971
8981
7054
5655
7181
8860
Zulu
7287
If yon choose a language that has a 3 letter language code, the code will be displayed every time yon change the
AUDIO or SUBTITLE language setting above. If 37o8choose any other languages, '---' will be displayed instead. (,3
letter language code is written in bracket.)
w
o..
If you subscribe to cable TV, the chtumels are displayed as 1-125. Cable comDulies often designate channels
with letters or letter-number combinations. Please check with your local cable compmly. The following is a
chart of common cable channel designations.
CATVchannel 5A
TVDisplay
1
CATVchannel C
TVDisplay
16
CATVchannel R
TVDisplay
31
2
3
4
5
6
7
8
9
10
11
12
13
A
B
2
3
4
5
6
7
8
9
10
11
12
13
14
15
w
21:
i-=
D
E
F
G
H
I
J
K
L
M
N
0
P
Q
17
18
19
20
21
22
23
24
25
26
27
28
29
30
S
T
U
V
W
W+l
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Z
CATVchannelW+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24
TVDisplay
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
CATVchannelW+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39
TVDisplay
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
CATVchannelW+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54
TVDisplay
76
77
78
79
80
CATVchannelW+55 W+56 W+57 W+58 A-5
TVDisplay
91
92
93
94
95
81
82
83
84
A-4
A-3
A-2
A-1
96
97
98
99
85
86
87
88
89
90
W+59 W+60 W+61 W+62 W+63 W+64
100
101
102
103
104
105
CATVchannelW+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79
TVDisplay
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
CATVchanneW+80 W+81 W+82 W+83 W+84
TVDisplay
121
122
123
124
125
- 31 -
F=
w
EN
Z
JBLESHOOTING
GUIDE
]Ifthe unit does not perform properly when operated as instructed in this Owner's Mgmual, check the unit, consulting the following checklist.
PROBLEM
No power
No operation by infrared remote
control
CORRECTIVE
ACTION
* Make sure tile power plug is connected to an AC outlet.
, Make sure the power is turned on.
, Check if the power plug is connected to an AC outlet.
* Check the batteries in the remote control.
*Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote control.
. Refer to the infrared signal on page 34.
. You have to be within 23 feet (7m) of the unit.
. Check if the correct mode is selected. If not, switch the mode by
pressing [SiZLECT], whichever you need.
I TV Mode ]
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
)ossibilities. Before arranging for service, check these items. I/could save your time and money.
PROBLEM
No picture or sound
No picture or poor picture on the
unit
No sound or poor sound
Bars on screen
Picture distorted or blurred
Picture rolls vertically
Lines or streaks in picture
No color
Poor reception on some channels
Ghosts in picture
Weak picture
EN
CORRECTIVE
ACTION
* Make sure tile AC cord is connected to an AC outlet.
• Check antenna connection.
• Press [SrZL_ZCT] to select TV mode.
Then try other TV feature.
• Let the unit program its tuner memory.
*Adjust direction or replace antenna.
• Adjust picture controls.
• Check for broken pin of the antenna cable.
• Adjust volume control on remote control or main unit.
• Press [MUTE] to restore sound.
• l[foutside antenna is being used, check for broken wire.
• Check for local interference.
* Try a new channel, if OK, then possible station trouble.
• l[foutside antenna is being used, check for broken wire.
• Try a new- chmmel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• ]Isantenna connected to jack on the back of the set?
• ]Ifoutside antemm is being used, check for broken wire.
" Adjust "COLOR" control.
• Try a new chmmel, if OK, then possible station trouble.
* Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
* Try a new chmmel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust "CONTRAST" & "BRIGHTNESS" control.
- 32 -
PROBLEM
SoundOK,picturepoor
Picture
CLOSED
Misspelling
by infrared
CAPTION
remote
in captions
[*
scrambled
• Make sure the AC coM is connected
• Check batteries in remote control.
PROBLEM
Text is not shown in its entirety or
a delay occurs from what is being
said.
Captions
boxes
ACTION
channel, if OK, then possible station trouble.
connected to jack on the back of the set?
antenna is being used, check for broken wire.
local interference.
•Adjust "CONTRAST"
& "BRIGHTNESS"
control.
•Try a new chmmel, if OK, then possible station trouble.
• Check for local interference.
OK, sound poor
No operation
control
CORRECTIVE
• Try a new
• Is antenna
• If outside
• Check for
with white
POSSIBLE
to an AC outlet.
REMEDY
• Error committed by the closed captioning production company.
Possible in a live broadcast. Not in case of a prerecorded
program.
• A few seconds of delay is common for live broadcast.
° Display capacity may not exceed 220 words per minute. If a dialogue
exceeds that rate, selective editing is used to insure that the captions
remain up-to-date with the current TV screen dialogue.
° Caused
by interferences
of building,
power
lines, thunderstorms,
etc.
No captions in a program which
must contain closed caption
• The broadcast may use a time compression
process to speed up the
program. The decoder cmmot read the compressed
information
and
captions will be lost.
Black box in the TV screen
• You are in TEXT mode. Select a CAPTION
"CAPTION2")
or Caption "OFF".
-. NOTE
The LCD panel is mgmufacmred
Lmay
mode ("CAPTION1
",
_
to provide many 3 ears of useful life. OccasionaH 3 a few non active pixels
appear as a fixed point of blue, green or red. This is not to be considered
- 33 -
a defect in the LCD screen.
J
EN
DVD Mode ]
PROBLEM
CORRECTIVE
No picture
•
•
•
•
Disc cannot be played
ACTION
Insert a correct video disc that plays on this unit.
Press [SELECT] to select DVD mode, then try other DVD feature.
Insert the disc.
Clem] the disc.
•
•
•
•
•
•
•
•
Place the disc correctly, with the label facing back of the unit.
Cancel the parental control or change the control level.
No sound
Connect the audio cables firmly.
Turn the power of the audio component on.
Correct the audio output settings.
Correct the input settings on the audio component.
This unit does not support DTS audio. This is not a malfunction.
No DTS audio is output
Them am some cases where pictures may be slightly distol_,ed, which
Distolled picture
am not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
• The selected language is not available for audio or subtitles on the
DVD. (This is not a malfunction.)
does not match the set up
The camera _mgle cannot be ch_mged • The DVD does not contain sequences recorded from different camera
angles. (This is not a malfunction.)
Audio or subtitle ltmguage cannot be • The DVD does not contain audio source or subtitles in the selected
changed
language. (This is not a malfunction.)
"Prohibited icon" appears on the
• That operation is prohibited by the unit or the disc.
screen, prohibiting an operation
(This is not a malfunction.)
CD sound dropout
• Scratched disc. Replace the disc with gm unscratched one.
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
Disc cannot be inserted
• Check if any disc is already in.
Disc cannot be taken out
• Unplug and plug again the power cord to the outlet, and then press
[EdECT _] on the remote control.
• Press and hold [EJECT
on the unit for more than 5 seconds.
NOTE
* Some functions am not available in specific modes, but this is not a malfunction.
this Owner's Manual for details on correct opemfions.
,, Playback
from a desired track and random
IR SIGNAL
playback
are not available
during program
CHECK
Use the AM radio or the digital camera to check if the remote control
properly sends out the infrared signal. It will help to define the cause of malfunction.
Usin_ AM radio
.Tune
the AM radio to no broadcasting
band.
Press any button on remote control toward the radio.
If the radio receives the signal from remote control properly,
the sound will flutter.
Using d_idi_ita|camera
(including
huilt-in
camera
of cellular
.Press and hohl any button or] remote
a digital camera. The remote control
if you confirm
EN
infrared
light through
phone)
control toward
is working
the digital
camera.
- 34 -
Read the description
playback.
in
CABINET
CLEANING
* Wipe the front panel and other exterior surfaces of the
unit with a soft cloth immersed in lukewarm water and
wrung dry.
® Handle the discs so that fingerprints
adhere to the surfaces of the discs.
and dust do not
® Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals
may cause damage
and discoloration
to the exposed surfaces.
SERVICING
® Should yore" unit become inoperative,
do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off. unplug the power cord and
please ('all our help line mentioned
on the front page,
to locate an Authorized
Service Center.
IF THE
LASER
OPTICAL
PICKUP
* Always store the disc in its protective case when it is not used.
UNIT
L$ DIRTY
* If the m_it still does not perform properly when it is operated, while referring to the relevant sections and to
"TROUBLESHOOTING
GUIDE" in this Owner's
Manual, the laser optical pickup unit may be dirty.
Consult your dealer or an Authorized
Service Center for
inspection and cleaning of the laser optical pickup unit.
PICTURE
SCREEN
* To clean-off, use a soft cloth.
* Do not use a hard cloth since this will mar the disc.
® Wipe the disc in a straight line fronl center to edge.
* Never wipe with a circular motion.
* Do not use detergent or abrasive cleaning agents.
CLEANING
* If the liquid crystal display panel should require cleaning, wipe it with a cotton or soft cloth. Before cleaning
the picture screen, disconnect
the power cord.
ECIFICATiONS
GENERAL
SPECIFICATIONS
ELECTRICAL
Sound
OTHER
LCD :
20 inch
Television system :
Closed caption system
Channel coverage:
VHF:
UHF:
CATV:
Tuning
System:
Channel
access:
Product
Discs:
type:
:
NTSC-M
§15.119/FCC
2- 13
14 - 69
2 _13, A - W,
W+I _ W+84,
A-5 _ A-l, 5A
181 channels
frecluency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
DVD Player
DVD video, Audio CD
CD-RW/-R
with MP3 files
SPECIFICATIONS
output:
2 speakers,
IW, 8 ohm
SPECIFICATIONS
Terminals
Antenna
input:
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
Mini DIN 4-pin jack
RCA connector X 1
RCA connector X 4
S-Video input:
Video input:
Audio L/R input:
Component
video input:
One pin jack (Y), IVpp (75 ohm)
Two pin jacks (Pr)/(Pb), 700mVpp (75 ohm)
Coaxial digital audio output:
One pin jack, 500mVpp (75 ohm)
Headphone:
1/8" stereo (3.5ram)
Remote control:
Digital encoded
infrared light system
Operating
5°C to 40°C
temperature:
(41 °F_ 104°F)
AC 120V, 60Hz
Power requirements:
Power consumption
61W
(Maximum):
LCD:
20"
Dimensions:
H :18-5/16"
(465mm)
W :23-3/8"
(594mm)
D : 9-1/8"
(23hnm)
Weight:
14.81bs. (6.7kg)
* Designs and specifications are subject to change without uotice.
* If there is a discrepancy hetweeu languages, the default lauguage
- 35 -
will be Euglish.
EN
[] INDICE
.....................................
[] CONTROLES
DE OPERACION
Y FUNCII)NES
.....
PARA INSERTAR LAS PILAS ....................
[] PREPARACION
PARA LA UTILIZACION
..........
CONEXIONES
DE ANTENA/CABLE
..............
CONEXION EXTERNA .........................
36
36
37
38
38
39
SECCION DE TV
[] OPERA CION DE TV Y AJUSTES .................
INSTALAC10N
INICIAL ........................
PARA MIRAR UN PROGRAMA DE TV ............
AJUSTE DE CANAL ...........................
1D1OMA DE MEN(I ............................
40
4(1
40
41
41
SECCION
DE DVD
[] REPRODUCCION
DE UN DISCO ................
REPRODUCCI()N
BASICA ......................
MEN() DE DISCO .............................
REANUDACION
..............................
42
42
43
43
INTROLES DE OPERACION Y FUNCIONES
] * Para elegir el modo de DVD presione prhnero [PLAY D] o [EJECT __], o introduzca un disco en la ranu
(7 NOTA
1
_ra.
De ntra manera, el DVD no funcionarfi.
- MANDO A DISTANCIA
• Para saber c6mo funciona el mando a distancia, consulte la [FigA ] de la pfigina 7.
1. Bot6n POWER
Presione para encender y apagar la unidad.
2. Botdn PICTURE
Presione para ajustar la imagen.
3. Botones num6ricos
Presione para seleccionar directamente el nfmero
de canal deseado.
Bot6n +100 (para modo TV)
Presione para seleccionar cmmles cuyo nfimero
sea superior a 99.
Botdn +10 (para modo DVD)
Presione para intrnducir los nfimeros superiores a
9 deseados.
4.Botdn SLEEP
Presione para ajustar el temporizador de reposo.
5.Botones SKIP I_1_ / I1_'1
Pmsione una vez para omitir capitulos o pistas y
desplazarse aun punto especffico.
6.Botdn PLAY[2>
Presione para reproducir el disco.
7.Botdn PAUSE |!
Presione para hacer una pausa en la reproduccidn
del disco actual.
8. Botdn DISPLAY
Para modo TV :
Presione pare visualizm"el nfimern actu_d de cml_den
la pmltgdladel televisol:
Para modo DVD :
Presione pare visnalizm el estado actual en la pro>
talla del televisol:
9.Botdn SETUP
Presione pare entmr o salir del menfi de configuracidn del TV/DVD.
10. Botdn TITLE
Presione para visualizar el menfi de tflulos.
ES
- 36
11. Bot6n CLEAR
Presione para cancelar o borrar un ajuste introducido actuahnente.
Presione para borrar la pantalla "DISCO ADENTRO".
12. Bot6n MODE
Presinne para visualizar la pmmflla de la reproduccidn programada o la de reproduccidn
aleatoria en el modo de parada.
Presione para visualizar la Dmtalla de ajuste del
nivel del negro o la pantalla de sonido envolvente
durante la reprnducci6n.
13. Botdn SEARCH MODE
Presione para localizar un punto deseado.
14. Botdn AUDIO
Para modo TV: Presione para seleccionar el
modo de sonido de TV (ESTEREO/SAP/MONO).
Para modo DVD: Presione para seleccionar un
idioma de audio deseado (si estfi disponible).
15. Bot6n EJECT
Presione para extraer un disco de la unidad.
16. Bot6n SELECT
Presione para seleccionar el modo TV, modo de
entrada extema o modo de DVD.
17. Botones CH. _, / 'V
Pmsione para seleccionar c_males memorizados.
18. Botones VOL. A / V
Presione para controlar el nivel de volumen del
DVD y el televisor.
19. Botdn MUTE
Presione para silenciar el sonido. Presi6nelo de
nuevo para restablecer el sonido.
20. Bot6n ZOOM
Presione para ampliar la palle de la imagen reprnducida en un DVD.
-
26.
21.Bot6nREV-_
Presione
paraverla imagen
ellDVDenretroceso
o enc_mara
lentademtroceso.
27.
Bot6nFWD _1_
Presione para mover en awmce rfipido o en
cfimara lenta en el disco.
28. Botdn ANGLE
Presione para cambiar el {mgulo de la c{unara y
ver la secuencia que se estfi reproduciendo
desde
un {tngulo difemnte (si existe).
29. Botdn REPEAT
Repite la reproduccidn
del disco, tftnlo, capflulo,
grupo o pista actual.
30. Botdn SUBTITLE
Presione para seleccionar el idioma de los subtftulos.
22. Bot6n STOP m
Pmsione para detener la reproducci6n del disco.
23. Bot6n DISC MENU
Muestra el mend del DVD.
24. Bot6n ENTER
Presione para establecer un ajuste.
25. Botones A (Arriba)/V (Abajo)/'11 (Izquierda) /
_b- (Dereeha)
Presione para seleccionar o ajustar los ftems del
menfi.
- PANEL
* Para
DE CONTROL
vet la ilustraeidn
del panel
de control,
vaya a la pfigina
31. Botdn MENU
Presione pare entrar o s_dir del menfi de configuraci6n del TV/DVD.
1
8, [Fig. 2].
36. Botones CHANNEL V / _,
Presione para seleccionar canales
37. Bot6n SELECT
32. Bot6n STOP m
Presione para detener la reproduccidn
del disco.
33. Bot6n PLAY
Presione para reproducir el disco.
34. Bot6n EJECT __
Presione para extraer un disco de la unidad.
35. Botones VOLUME V / A
Presione para controlar el nivel de volumen del
DVD y el televisol:
1
Bot6n RETURN
Presione para volver a la pantalla anterior en el
mend de configuraci6n.
Bot6n A-B
Presione para repetir la reproducci6n
de una seccidn seleccionada.
memorizados.
Presione para seleccionar el modo TV, modo de
entrada externa o modo de DVD.
38. Botdn POWER
Presione para encender y apagar la unidad.
39. Ventanilla del sensor de mando a distancia
PRECAUCIONES
INSERTAR
LAS
Abra la cubierta del compartimiento de las
pilas empujando la cubierta del mando a distancia en el $entido de la flecha.
A LA HORA
PILAS
DE
,, Asegfirese de seguir la polaridad correcta, tal como
se indica en el compal_,imiento
de las pilas. Si se
colocml las pilas con la polaridad invel_,ida se
pueden ocasionar &uSos a la unidad.
2 Inserte 2 pilas "AA" en el compartimiento de
las pilas, en el sentido indicado pot las marcas de polaridad (+/-).
* No mezcle distintos tipos de pilas (ej. alcalina
carb6n-zinc)
o pilas viejas con nuevas.
3 Vuelva a porter la cubierta.
y de
o Si no va a usarse la unidad dur_mte un perfodo
largo de tiempo, quite las pilas para prevenir dafios
o lesiones ocasionadas
pot posibles fngas de las
pilas.
® No intente recargar las pilas que no sean para
recargar; pueden sobrecalentarse
y estropearse.
]*No
|con
|
se recomienda el nso de mandos a distancia universales.
No todas las fnnciones pneden controlarse
un mando a distancia universal.
decide usar un mando a distancia universal con esta unidad, sea consciente de qne el ndmero de cddigo
suministrado
NOTA
pnede no adecuarse a la unidad. En este caso. llame al fabricante del mando a distancia uni- ]
L
versal.
/si
37
ES
"IN PARA LA UTILIZACION
*Los cables utilizados aqul estfin disponibles
en los comercios.
I_- ® Para
su
seguridad
y
para
evitar
dafios
a
la
unidad,
desconecte
NOTA
antes de trasladar
la unidad.
- CONEXIONES
el cable de antena de la toma
ANT
]
DE ANTENA/CABLE
SI TIENE
UNA TOMA DE PARED
Conecte el televisor a la toma de antena de pared con
el cable RF (disponible en los comercios).
[Parle posterior de
esle tmklad I
SI TIENE
CABLE
DE HILOS
Conecte el televisor al cable de antena.
NOTA
,' Antes de conect_u" la antena en la tOl'ilaANT de la unidad,
COlnpruebe que la patina no estd torcida. Si 1o estfi, ponga la
patilla recta tal corno se rnuestra en la ilustracidn
y a contin-
uacidn conecte la patilla a la toma ANT de la unidad.
desde
Sefill
cable
o Anten
Patilla torcida
del TV
i
COlIeCIOF
(Debe
recta)
- CONEXION CON CAJA DE CONVERTIDOR/CAJA
(patil|a
ponerse
recta)
DE SAT_:LITE
CUANDO
SE USA UNA CAJA DE CONVERTIDOR/CAJA
DE SATELITE
Ip.,,"p,,_,,'"_d,._._,,.
_._id
<
Si su compafifa
de televisidn
una caja de convepridor
satdlite,
podrfi utilizar
muestra
anteriormente.
por cable
le suministra
o si usa un sistema
de
la conexi6n
bfisica que se
(@1 de c/m_ertidol
.... !i_d,, _,_li_,.
La selecci6n
de los canales
deberfi hacerse
caja de convertidor
o caja de satdlite.
Esto
que no es posible
mando
a dist_mcia
(able
cambiar
de canal
de la unidad.
con la
significa
utilizando
el
coaxial
de 75 ohmk)s
desde Compafiia de Cable o
plato del sat_lile
NOTA
Para
el instalador
de sistemas
• Esta nota tiene la finalidad
Artlculo
820-40
ticular,
especifica
de entrada
ES
de la NEC,
CATV:
de llamar
que la tierra
del cable como
la atencidn
que proporciona
del instalador
recomendaciones
del cable debe conectarse
de sistemas
al sistema
sea posible.
- 38 -
CATV para que tenga en cuenta
para hacer una conexidn
de puesta
a tierra apropiada
a tierra del edificio,
tan cerca
el
y, en pardel punto
Puede conectar esta unidad a su equipo de audio/vfdeo.
,, Asegfrese de apagar todos los componeutes del
sistema antes de conectar otto componeute.
" Consulte los manuales de iustrucciones de los
componentes que va a conectar a la unidad.
_- NOTA
Cuando utilice las tomas de entrada externa, seleccione
"AUX1"o "AUX2" presionando[SELECT]. (Consulte
la p_gina 40.)
• Para utilizar la tomas VI[DEOI, seleccione
"AUX1 ".
• Para utilizar la tomas VIDEO2, seleccione
"AUX2"
AUDIO
VIDEO2
VIDEO1
- ENTRADA DE V|DEO1
Cable de audio (SALIDA)
Use esta conexidn si su propio equipo A/V (ej.
videograbadora) tiene tomas de salida de audio y
video. Cuando se usa un cable Video-S, se obtiene
una imagen mejor.
rJ 1
'"blec
"de°
'e'SaL'OA /
_L_+f_
_:[[_(INj
CableVIDEO-S
(SAL1DAIL
1
Vid_o_,-,b,,do,.J
_-- NOTA
J
la toma VIDE()
y la toma S-VIDEO
simultfineamente,se
da prioridad
a la S-VIDEO.
l ,,e Si conecta
su propioequipoes
monofdnico(s61o
tiene unatoma
de audio),conecteel
cablede audioa
la tomaAUDIOL de esla unidad.|
- ENTRADA DE VIDEO2
Use esta conexi6n si el equipo A/V (ei. videocfimara
u videojuego) tiene tomas de salida de video COM-
de
i
_ Cable audio
I
componente
PONENTE (Y,Pb,Pr). Podrfi disfrutar de una mejot
hnagen cou esta conexi6n.
Videoc_imara
(SALIDA)
| Cable de x'Neo
Podr_ disfrutar de un sonido de DVD con
mils pmsencia desconect_mdo el equipo de
audio digital, tal como el descodificador
Dolby Digital.
- SALIDA DE AUDIO
Atoma de ENTRADA
DIGITAL COAX1AL
DE AUD10
Equipo
domdstico
Descodificador
de: audio
Dolby
Digital
,-- NOTA
* La fuente de audio de un disco en formato ambiental multictmal Dolby Digital no puede ser grabado
como sonido digital por una platina MD o DAT.
,, Si conecta un descodificador Dolby Digital, t_iuste la funcidn "DOLBY DIGITAU a "BITSTREAM" para
salida de audio en el modo de configm'acidn.
o A menos que se haga la conexidn a un decodificador "DOLBY DIGITAl" a "PCM" para salida de audio
en el modo de configuracidn.
La reproduccidn en una unidad utilizando _iustes incorrectos puede generar ruido y distorsidn, y tambi4n
puede provocar &uSos a los altavoces.
Fabricadobajo lieencia de DolbyLaboratories,"Dolby" y el s!mbolo de la done D son marcascomercialesde
39
ES
DE TV Y AJUSTES
1
CuaMo se endende la unMad pot primera vez, se
muestra la pmltalla de SELECT LANGUAGE.
Selecdone el idksma de visualizaci6n de Dmtalla y
eiecute la autoprogramaci6n del canal.
1 Despues de finalizar la conexi6n de la
antena o del cable, conecte el cable de
alimentaci6n a una toma estfindar de CA.
C-)
F
NOTA
Si la pantalla del TV nmestra WRI_IOU
...............
E aNVEN_CABL_Sr_TmTE
•ntel_elenc
"
" a.S de nieve" y
2 WRI_IOUg
.................
PR_ aUTO¢_'Esra
no ffmciona bien durante
d_E2_£,i_7
...............
mils de 5 segundos,
_..........................
aI alecela SUGERENCIAS UT][LES".
Siga las instrucciones de la pantalla.
* Si este ajuste no ftmciona correctamente,
llame a nuestro teldfono de asistencia (en la
portada en este manual del usuario).
DEL OBUARIO O PANEL TRABERO PkRA
NOTA
• Si se visualiza alg(m dfgito en llt esquhm de llt|
pmltalla, presione [POWER] sin desconectar
el cable de alimentacfaon.
J
2
Presione [POWER] para encender la unidad.
2 Presione [CH. a, / T] o los botones numOrieos
para seleccionar el nOmero de canal deseado.
Presione [POWER] para encender la unidad.
_ZD
3
Presione cualquier tecla para
sebccionar
el idioma del
_o............
..................
@@
®ENGLISH: [OH. A]
,, ESPAIqOL: [CH. _']
,, FRAN_AIS: [VOL. A]
4 Confirme la conexi6n de la antena I
...................
o
del
cable
resione
CH
A
.....................
(
.
.) Y P
[
El, mtonlzad( 1ex I ]ora 3
/
memoriza todos los clmales
=
activos
].
/
_TZ{LIg_EE_E;
.........
o
@
NOTA
Para seleccionar el nfimero de canal mediante los botches num@icos:
, Para seleccionar un nfimero de cmml de un
solo dfgito, presione primero [0] (ej. Para el
canal 2, presione [0] [2]).
, Para seleccionar canales pot cable cuyos nOmeros
scan superiores a 99, presione primero[+100l+l 0]
(ej. Para el canal 125, presione [+100/+10] [2] [5]).
de su zona.
3 Presione [VOk. A / V] para seleccionar el
nivel de volumen deseado.
Cuando la exploraci6n ha
CA151
finalizado, el sintonizador se
detiene en el canal
!|||||==========
memorizado mils bajo.
(Ejemplo)
NOTA
* Presione [MUTE]para silenciar el sonkto al instante.
,,Si [MENU] se presiona durante la exploraci6n
Vuelva a presionaflo para restaurar el nivel de
voiumen
anterior.
de cana]es, el sintonizador interrumpe la
exploraci6n y se muestra el clmal memorizado
NOTA
%
mils bajo.
* Si presiona [CH. _ / _] ell el modo DVD,
]
*El menfl INSTALACION 1NICIAL se muestra
puede cambiar los canales del televisor. [llcltlso
si apaga la mndad ell el modo DVD, cuando
cada vez que usted enciende la unidad a menos
vuelve a encenderlo se pondrfi ell el modo TV.
que la exploraci6n se haya finalizado.
PA'RA VER UN CANAL POR CABLE 0 SATELITE
*En caso de que no pueda
recibirse ningfincanal mediante
Si la unidad estfi conectada a una caja de convertidor o
la expM'aci6nde canales, "NO
....... _......
caja de sat6lite, presione [CH. _, / V] para seleccionar
HAYSENAL DE TV" aparece
CA3 o CA4 segdn el ajuste de carol de salida del
en pantalla. Apague la unidad y
aparato, y seleccione en 61 el canal deseado.
compruebe la conexidn de la
PARA VER SENALES
DE ENTRADA
DE
antena; a continuacidn, siga los pasos 1 a 5 otra vez.
UN DISPOSITIVO
EXTERNO
*Puede cambiar el despufisde finalizar la INSTACuando conecte un equipo externo alas tomas de
LACION INICIAL mediante el menfi IDIOMA o el
entrada Clelanteras AUDIO/VIDEO, presione
menfiAJUSTE DE CANAL.(Consulte "IDIOMA DE
[SELECT] o [OH. _, / _'] repetidamente hasta que
MEN(I "o "AJUSTE DE CANAL" en phgina 41).
' 40 !tparezca en la Dmtalla "AUX1" o "AUX2".
ES
/
VOLOMEN
211
J
PROGRAMACION
AUTOM/_TICA
DE CANAL
De acuerdo con la configuraci6n de f_brica, esta
unidad ha memorizado todos los canales, incluidos
los que no esttln disponibles en su localidad. Esta
funci6n solo pone autom_ificamente en memoria los
canales disponibles.
1 Presione [SETUP] y a continuaci6n presione
[A] o [_'] para se_alar "AJUSTE DE CANAU'.
TV pREp
L_
SETUP
@
[_
_"
_
ml_
AJUSTE
_
_\
_
1 Presione [SETUP] y a continuaci6n presione
[A] o [_'] para seleccionar el "IDIOMA".
TV
SETUP
[_
_
_
C-2,
AJUSTE
PREp
DE CANAL
...................
TIT/ILO
AJUSTE
I FB
DE V_HIP
.....
2 Presione [ENTER] repetidamente para seleccionar "ENGLISH" = ingles, "ESPANOU' o
"FRANQAIS"= frances.
DE V
CANAL
CHiP
T_,_LO'O'O_A
EOm
[ESPA_OL]
LUZ OE FONDO [BIqlLL©]
Cv2
:3 Presione [SETUP] para sad del men0.
2 Presione [ENTER] y a continuaci6n presione
[A] o [v] para se_alar "PREA. AUTO CA.".
AJUSTE
/
\
PREA
AUTO
,-- NOTA
DE CANAL
AGREGAR/BORRAR
I_
SETUP
- Esta funci6n selecciona s61o el idioma del
menO de pantalla; no la fuente de audio.
- Si pot alguna raz6n el mend estd en espariol o
en franc_s, presione [SETUP], luego [A] o
[_'] para seleccionar "LANGUAGE [ENGLISH]" o "LANGAGE [FRANQAIS]', y a
continuaci6n presione [ENTER] repetidamente pare seleccionar el idioma deseado y
luego pmsione [SETUP].
CA (OAT'/)
CA
",,,. j
3 Presione [ENTER].
®E1 sintonizador explora y memoriza todos los
c_umles activos de su localidad.
* El sintonizador se detiene en el canal memorizado
inferior.
--NOTA
- Cuando estd activado "PREA. AUTO CA."
donde no hay entrada de serial de TV, aparecerfi "NO HAY SEi_AL DE TV" en la pantalla despu6s de completarse la exploraci6n
de los cmmles.
®La unidad puede mconocer canales CATV como
canales de TV si las condiciones de recepci6n
son malas. En este caso, compruebe la conexi6n
de la gu_tenay vuelva a intentar "PREA. AUTO
CA." cu_mdo las condiciones de recepci6n
lnejoFen,
* La autoprogramaci6n
del canal NO es necesaria cuando la unidad est_ conectada a una
caja de convertidor o caja de satdlite. S61o
tiene que seleccionar el canal para caja de
convertidor o entrada de satglite (ej. CA3 o
CA4) de la unidad y a continuaci6n seleccione
el canal que desee en la caja de convertidor o
la caja de satdlite.
- 41 -
ES
CClON DE UN DISCO
5
Precione [EJECT ,L] para extraer la disco de
la unidad,
EJECT
_"
_SKIP_
ZOOM
MUTE
NOTA
• Cualdo el modo DVD se ha cambiMo al modo
TM el modo DVD se desactiva primero y a
continuaci6n apamce la hnagen y suena el
sonido en el TV al cabo de unos 4 segundos.
De la misma manera, cuando se pmsiona
[POWER] para apagar la unidad en el modo
DVD, este modo se desactiva primero y a continuaci6n se apaga la unidad.
,, Puede apamcer "_)" en la pmle superior
demcha de la pgmtalla del TV durante su funcionamiento, que avisa de que el DVD o el
disco hart
encontrado una operaci6n prohibida.
• Con los DVD que utilizan tftulos para sefiales
de mproducci6n programada, la reproducci6n
puede empezar desde el segundo tftulo y
puede omitir estos tftulos.
• Durgmte la reproducci6n de un disco de dos
capas, las imfigenes pueden detenerse durante
un rato. Esto ocurm cu_mdo la 1"capa cambia
a la 2". No se tram de una anomaHa.
i,
DISC
,, Los botones sombreados se utilizan paralas siguientes operaciones,
PARA
EMPEZAR
Si es necesario, encienda el amplificador y cuMquier
otro
compor_er_te,
1 Presione
[POWER]
2 Abra la bandeja
para encender
la unidad.
REPRODUCCION
DE MP3
J
3j
1 En el modode parada,presione[DISCMENU]y precione
[A] o [V] paraseleccionarel grupoo pistaque desee.
del disco manualmente.
LISTADE ARCHIVOS
N FO_E_ I N_BRE DED=S_
<_
3
_
_
Nor{b
e de cafp_a
I
4
No,,bo do_,,hi_o21
_ Notfb edeawhivo
introduzcael disco elegido con la etiqueta hacia la
parte trasera de la unidad para reproducirlo.AI
presionarsuavementeel disco para introducirloen la
ranura,su reproducci6nempezarfi automfiticamente.
®La reproducci6n empezar_ desde el prhner cap(tulo/pista del disco.
,, Si la reproducci6n no empieza automfiticamente,
presione [PLAY L>].
* Cuando reproduzca un DVD que incluya un
menfi de tftulos, este menfi puede aparecer en
pantalla.
4 Presione [STOP m] para detener la reproducci6n.
ES
_,_)
N°",_ e de art hiv° 3
<'>> I _
* Si ha selecciona un grupo, presione [1_] o
[ENTER] para ira la pantalla de selecci6n de
pistas. Presione [._] para volver a la pantalla
m_terior (excepto la pdgina superior).
* Si ha seleccionado una pista, presione [ENTER]
para empezar a reproducir pistas. Si empieza pot
la que acaba de elegir se mproducirtln las pistas
siguientes.
,, Si no puede visualizarse enseguida en pgmtalla la
lista entera de archivos, apamce la "_7"para ir a la
p(tgina siguiente.
®Presione [TITLE] para volver al archivo superior
de la jerarqufa mils alta del programa y de la
lista de amhivos.
2
-42 -
Presione [STOP _] para detener la reproducci6n.
]1
,-- NOTA
• Las carpetas se conocen como grupos; los
archivos, como pistas.
®Los archivosMP3 van acoinpafiados de [] iconos.
• Se puede reconocer un mgximo de 255 carpetas.
• Se puede reconocer tln m_iximode 999 archivos.
• Pueden crearse hasta 8 jerarqufas.
Se recomienda para esta unidad el uso tie archivos
grabados segfin las especificaciones siguientes:
• Frecuencia de muestreo: 44,1 kHz o 48kHz
• Velocidad de transmisi6n de bits constante:
32kbps N 320kbps
• Para archivos MP3 grabados en velocidad de translnisidn tie bits variable (VBR), la unidad puede no
mostrm el tiempo real trtuascurrido.
Y MP,3
1 Durante la reproduccidn,
presione [STOP Ill.
* Aparecerfi el mensaje de regmudacidn en la pantalla del TV.
2 Presione [PLAY D], la reproduccidn continuarfi desde el punto donde se par6 la reproducci6n.
1 Presione [DISC MENU].
MENU
DiSC
(U2
,, Aparecerfi el mentl principal de DVD.
,, Si esta funci6n no estfi disponible, (_) el sfinbo1o puede apamcer en la pantalla del televisor.
* Si el menll de disco estfi disponible en el disco,
apamcemn las opciones de idioma de audio, de
subt/tulos, cap(tulos del tfmlo y otras para su
selecci6n.
®Para cancelar el modo de reanudaci6n, presione
dos veces [STOP m].
,, Para MP3, la reproducci6n se reanudarfi desde el
principio de la pista actual.
• La infonnacidn de reanudacidn permanece activada incluso cugmdo apaga el intermptor principal.
2 Presione [A], [T], [_1] o [_1 para seleccionar
un item y presione [ENTER] para confirmar la
selecci6n.
C?D
\
/
- 43 -
ES
SYLVANIA
LIMITED
FUNA1 CORP. will repair this product,
as follows:
fl'ee of charge
WARRANTY
in the USA in the event of defect in materials
or workmanship
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace de*)ctiveparts
(late of original retad purchase.
Certain parts and LCD
warranty.
LABOR:
FUNAI
original
LIMITS
THIS
CORR will provide
retail purchase.
the labor without
charge
without charge for one (1) year from tile
image burn-in are not covered under this
for a period
of ninety
(90) days from the (late of
AND EXCLUSIONS:
WARRANTY
1S EXTENDED
ONLY
TO
THE
ORIGINAL
RETAIL
RECEIPT OR OTHER PROOF OF ORIGINAL
RETAIL PURCHASE
WILL
THE PRODUCT
TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty
shall not be extended
to any other person
PURCHASER.
BE REQUIRED
A PURCHASE
TOGETHER
WITH
or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized
service center. This limited warranty does not apply to any product
not purchased
and used in the United States.
This warranty only covers failures due to defects in material or workmanship
which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations
or product not
supplied by FUNAI CORR, or damage which results from accident,
misuse, abuse, mishandling,
misapplication,
alteration,
faulty installation,
improper
maintenance,
commercial
use such as hotel, rental or office use of this
product or damage which results fl'om fire, flood, lightning or other acts of God.
THIS WARRANTY
DOES NOT COVER PACKING
CONTROL),
ANY COSMETIC
PARTS, COMPLETE
MATERIALS,
ASSEMBLY
ANY ACCESSORIES
(EXCEPT
REMOTE
PARTS, DEMO OR FLOOR MODELS.
FUNAI CORR AND ITS REPRESENTATIVES
OR AGENTS
SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL,
INDIRECT
OR CONSEQUENTIAL
DAMAGES
ARISING
OUT OF OR OCCASIONED
BY THE
USE OF OR THE INABILITY
TO USE THIS PRODUCT.
THIS WARRANTY
IS MADE IN LIEU OF ALL
OTHER
WARRANTIES,
EXPRESS
OR IMPLIED,
AND OF ALL OTHER LIABILITIES
ON THE PART OF
FUNA1,
ALL OTHER
WARRANTIES
INCLUDING
THE WARRANTY
OF MERCHANTABILITY
AND
FlTNESS
FOR A PARTICULAR
PURPOSE,
ARE
HEREBY
DISCLAIMED
BY FUNAI
AND
ITS
REPRESENTATIVES
IN THE UNITED STATES.
ALL WARRANTY
INSPECTIONS
AND REPAIRS
SERVICE
CENTER.
THIS WARRANTY
IS ONLY
AUTHORIZED
SERVICE CENTER.
MUST
BE PERFORMED
VALID WHEN THE UNIT
BY AN AUTHORIZED
IS CARRIED-IN
TO AN
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNA1
CORR
ATTENTION:
FUNAI CORR RESERVES THE RIGHT TO MODIFY ANY DESIGN
WITHOUT PRIOR NOTICE.
WARRANTY
STATEMENT
REGARDING
NON AUTHORIZED
OF THIS PRODUCT
REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER.
FUNA1 CORR will not reimburse you for any service done by unauthorized service providers without prior
written approval.
To locate your nearest
please contact us at:
AUTHORIZED
SERVICE
CENTER
or for
general
service
inquiries,
FUNA1 CORPORATION
Customer Service
Tel :1-800-968-3429
http://www.SylvaniaConsumerElectronics.com
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
1EMN21900
L2650UA ***_
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 44 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Thu Apr 05 16:38:33 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools