Sylvania Dvc850C Users Manual

DVC850C DVC850C

DVC850C to the manual bf618956-98ca-4c4d-8ed8-efa5d3bcf9d2

2015-02-04

: Sylvania Sylvania-Dvc850C-Users-Manual-389346 sylvania-dvc850c-users-manual-389346 sylvania pdf

Open the PDF directly: View PDF .
Page Count: 48

OWNER’S

MANUAL

If you need additional assistance for set-up or operating

after reading owner’s manual, please call

TOLL FREE : 1-800-968-3429

Please read before using this equipment.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

DVD PLAYER with VIDEO CASSETTE RECORDER

DVC850C

–2–EN

1L25

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to

possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO

NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the pres-

ence of important operating and maintenance

(servicing) instructions in the literature accom-

panying the appliance.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER SER-

VICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.

The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA

FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

–3–EN

1L25

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instruc-

tions should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

5. Cleaning - Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the pos-

sibility of the loss of an authorization code for a CATV

converter, is not intended to be unplugged by the user for

cleaning or any other purpose, may exclude the reference

to unplugging the appliance in the cleaning description

otherwise required in item 5.

Attachments - Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

7. Water and Moisture- Do not use this video product near

water, for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swim-

ming pool, and the like.

Accessories - Do not place this video product on

an unstable cart, stand, tripod, bracket, or table.

The video product may fall, causing serious

injury to a child or adult, and serious damage to

the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the video product. Any mounting of the appliance

should follow the manufacturer's instructions and should use

a mounting accessory recommended by the manufacturer.

An appliance and cart combination should be moved with

care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provid-

ed for ventilation and to ensure reliable operation of the

video product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the video product on a

bed, sofa, rug, or other similar surface. This video product

should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

10. Power Sources - This video product should be operated

only from the type of power source indicated on the mark-

ing label. If you are not sure of the type of power supply

to your home, consult your appliance dealer or local power

company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is

equipped with a polarized alternating-current line plug (a

plug having one blade wider than the other). This plug will

fit into the power outlet only one way. This is a safety fea-

ture. If you are unable to insert the plug fully into the out-

let, try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or

cable system is connected to the video product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with regard to

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-dis-

charge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

14. Lightning - For added protection for this video product

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This

will prevent damage to the video product due to lightning

and power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this video product through any openings as they may

touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of

any kind on the video product.

18. Servicing - Do not attempt to service this video product

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service - Unplug this video product

from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

c. If the video product has been exposed to rain or water.

If the video product does not operate normally by follow-

ing the operating instructions. Adjust only those controls

that are covered by the operating instructions as an improp-

er adjustment of other controls may result in damage and

will often require extensive work by a qualified technician

to restore the video product to its normal operation.

If the video product has been dropped or damaged in any way.

f. When the video product exhibits a distinct change in per-

formance this indicates a need for service.

20. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock or other hazards.

21. Safety Check - Upon completion of any service or repairs

to this video product, ask the service technician to perform

safety checks to determine that the video product is in

proper operating condition.

22. Heat - This video product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND

CLAMP

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

S2898A

–4–EN

1L25

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of all materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local

regulations concerning chemical wastes.

The serial number of this product may be found on the back of the DVD/VCR player. This serial number is

unique to your machine. You should record the number and other vital information here and retain this book as

a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

ABOUT COPYRIGHT

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by claims of certain U.S. patents and

other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copy-

right protection technology must be authorized by Macrovision Corporation, and is intended for home and other

limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some headings and notes in this manual, with the following meanings

: refers to playback of video cassette tapes.

: refers to playback of DVD video discs.

: refers to playback of audio CDs.

: refers to playback of MP3 discs.

MP3

DVD

VCR

SUPPLIED ACCESSORIES

Remote control

(NA200UD)

Two AA batteries A/V cables

(approx. 3 feet (100 cm)

long) (WPZ0102TM015) WPZ0901TM002

Coaxial Cable

–5–EN

1L25

TABLE OF CONTENTS

■ LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3

ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SYMBOLS USED IN THIS MANUAL. . . . . . . . . . . . . . . . . . 4

■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

■ PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PLAYABLE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

DISC TYPES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

■ OPERATING CONTROLS AND FUNCTIONS. . . . . . . . . . . 9

DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

DISPLAYS DURING OPERATION . . . . . . . . . . . . . . . . . . . 12

LOADING THE BATTERIES. . . . . . . . . . . . . . . . . . . . . . . . 12

■ VIDEO/DVD SWITCHING . . . . . . . . . . . . . . . . . . . . . . . . . 13

■ HOOKUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

DVD/VCR TO TV CONNECTION. . . . . . . . . . . . . . . . . . . . 14

SETTING THE CH3/CH4 SWITCH . . . . . . . . . . . . . . . . . . . 14

CONNECTING TO A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT

JACK OR COMPONENT VIDEO IN JACKS. . . . . . . . . . . . 14

CONNECTING TO AN AMPLIFIER EQUIPPED WITH

DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT

DECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CONNECTING TO A DOLBY DIGITAL DECODER OR

DTS DECODER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

CONNECTING TO AN ANALOG AUDIO. . . . . . . . . . . . . . 16

■ SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

AUTOMATIC CHANNEL SET UP. . . . . . . . . . . . . . . . . . . . 17

TO CHANGE THE ON-SCREEN LANGUAGE . . . . . . . . . . 18

CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

■ PLAYBACK FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

NORMAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . 19

SEARCH FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

■ RECORDING FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . 20

VIEWING AND RECORDING THE SAME PROGRAM. . . 20

OTR (One Touch Recording). . . . . . . . . . . . . . . . . . . . . . . . . 20

TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

HINTS FOR TIMER RECORDING . . . . . . . . . . . . . . . . . . . 21

■ SPECIAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

COPYING A VIDEO TAPE. . . . . . . . . . . . . . . . . . . . . . . . . . 22

MTS (Multi-Channel Television Sound) SYSTEM . . . . . . . . 22

AUTO REWIND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

REAL TIME TAPE COUNTER. . . . . . . . . . . . . . . . . . . . . . . 23

INDICE

■ CONTROLES DEL FUNCIONAMIENETO Y SUS FUNCIONES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

■ CAMBIO DE VCR/DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

■ CONEXIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

DVD/VCR A CONEXIÓN DE TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

AJUSTANDO EL CONMUTADOR CH3/CH4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

CONECTANDO A UN TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

CONECTADO A UN TV QUE TIENE TOMA DE ENTRADA DE S-VÍDEO o TOMAS DE ENTRADA DE VÍDEO COMPONENTE

. . . 46

CONECTANDO A UN AMPLIFICADOR EQUIPADO CON TOMAS DE ENTRADA DIGITAL, TALES COMO PLATINA MD O PLATINA DAT

. 46

CONECTANDO A UN DESCODIFICADOR DIGITAL DOLBY O DESCODIFICADOR DTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

CONECTANDO A UN AUDIO ANALÓGICO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

■ PREPARACIÓN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

PREPARACIÓN DE CANAL AUTOMÁTICA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

PREPARACIÓN DE RELOJ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

REPRODUCIENDO UN DVD, VIDEO O UN CD AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

■ PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

PLAYING A DVD VIDEO OR AN AUDIO CD . . . . . . . . . . 23

USING THE DVD MENUS . . . . . . . . . . . . . . . . . . . . . . . . . 23

USING THE TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . 24

PAUSING PLAYBACK OR DISPLAYING A STILL

PICTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

RESUMING PLAYBACK FROM THE POINT WHERE

PLAYBACK STOPPED . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

STEPPING THROUGH FRAMES . . . . . . . . . . . . . . . . . . . . 24

FAST FORWARD/REVERSE . . . . . . . . . . . . . . . . . . . . . . . . 25

SLOW MOTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

STARTING FROM A DESIRED TRACK . . . . . . . . . . . . . . . 25

PLAYING FROM A DESIRED TITLE OR A CHAPTER . . . 25

STARTING FROM A DESIRED TIME COUNT. . . . . . . . . . 26

MARKER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

RANDOM (Audio CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

PROGRAM (Audio CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ZOOM PLAYBACK (enlargement on-screen) . . . . . . . . . . . . 28

PLAYING AN MP3 DISC. . . . . . . . . . . . . . . . . . . . . . . . . . . 29

CHANGING THE ON-SCREEN DISPLAY DURING

MP3 DISC PLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

PLAYING A DESIRED TRACK FROM AN MP3 DISC . . . 30

PLAYING AN MP3 DISC RANDOMLY . . . . . . . . . . . . . . . 30

PLAYING AN MP3 DISC IN A PROGRAM. . . . . . . . . . . . . 30

■ SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

CHANGING THE AUDIO LANGUAGE OR SOUND

MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

CHANGING THE SUBTITLE LANGUAGE . . . . . . . . . . . . 32

CHANGING THE CAMERA ANGLE

(Multi-Angle Pictures). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . . . . 33

BLACK LEVEL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . 33

TruSurround SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

■ CHANGING THE SETUP ITEMS. . . . . . . . . . . . . . . . . . . . 34

LANGUAGE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

DISPLAY SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

AUDIO SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

■ LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . 38

■ TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . . . . 39

■ HANDLING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . 40

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

■ SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

–6–EN

1L25

FEATURES

Mode

¡Dolby Digital sound

This player can handle Dolby Digital surround sound

with 5.1 channels when connected to a Dolby Digital

decoder.

¡Still/fast/slow/step playback

Various playback modes are available including still pic-

tures, fast forward/reverse, slow motion and step frames.

¡Random playback for audio CD and MP3

This player can shuffle the order of tracks to play them in

random order.

¡Program playback for audio CD and MP3

You can program the order of tracks to play them in any

desired order.

¡DVD menus in a desired language

You can display DVD menus in the desired language, if

available on the DVD.

¡Screen saver/Auto power-off functions

The screen saver program starts when there is no input

from the player for five minutes in the stop mode. When

the screen saver program has been activated for 30 min-

utes, the screen saver is automatically turned off.

¡Subtitles in a desired language

You can select the desired language for the subtitle dis-

play, if that language is available on the disc.

¡Selecting a camera angle

You can select the desired camera angle, if the disc con-

tains sequences recorded from different angles.

¡Choices for audio language and sound mode

You can select the desired audio language and sound

mode, if different languages and modes are available on

the disc.

¡Parental lock

You can set the control level to limit playback of discs

which may not be suitable for children.

¡Automatic detection of discs

This player automatically detects if the loaded disc is

DVD, audio CD or MP3 on disc.

¡Playing an MP3 disc

You can enjoy MP3 files which are recorded on CD-

R/RW.

¡Direct Search

You can search for the desired title, chapter, and track with

the Number buttons during playback or in stop mode.

DVD

¡On-screen display

Information about the current operation can be displayed

on the TV screen, allowing you to confirm the currently

active functions (such as program playback), on the TV

screen using the remote control.

¡DTS (Digital Theater System)

You can enjoy 5.1 channel surround system developed by

the Digital Theater System co. which reproduces the orig-

inal sound as truthfully as possible.

¡Search

Chapter search

: Search for a chapter designated by user is

possible.

Title search: Search for a title designated by user is pos-

sible.

Track search: Search for a track designated by user is

possible.

Time search: Search for a time designated by user is

possible.

¡Repeat

Chapter: Repeated playback of the chapter of the

disc being played is possible.

Title: Repeated playback of the title of the disc

being played is possible.

Track: Repeated playback of the track of the disc

being played is possible.

Disc

(audio CD)

: Repeated playback of the entire disc being

(MP3) played is possible.

A-B: Playback of the section between A and B

(designated by user) is possible.

Album: Repeated playback of the album of the

MP3 disc being played is possible.

¡Zoom

A×2 and ×4 magnified screen can be displayed.

¡Marker

A part designated by user can be called back.

¡Resume Play

User can resume playback from the part at which the play

was stopped even if the power is turned off.

¡SRS TruSurround

You can enjoy a stereophonic virtual space on your exist-

ing stereo system.

¡Component Video Out Jacks

Jacks located on the back of the DVD/VCR are used to

send high-quality video to a TV via Component Video In

Jacks.

¡Dimmer

Brightness of the display can be varied.

¡Bit rate indication

¡DRC (Dynamic range control)

You can control the range of sound volume.

This unit employs TruSurround system

of SRS Labs, Inc. as virtual

technology.

TruSurround and the symbol are trademarks of

SRS Labs, Inc.

TruSurround technology is incorporated under license

from SRS Labs, Inc.

–7–EN

1L25

Mode

Hardware specifications

¡Auto Head Cleaner

¡4 Head HiFi Stereo

¡Bilingual on-screen menu display selectable in

English, French, or Spanish

¡181 channel capability PLL frequency synthesiz-

er tuner with direct station call

(A cable converter box may be necessary to view scram-

bled cable channels.)

Automatic functions

¡Auto power on system

Automatically turns the DVD/VCR on when you insert the

cassette.

¡Digital Auto Tracking (DTR)

VCR

INSTALLATION LOCATION

For safety and optimum performance of your DVD/VCR:

• Install the DVD/VCR in a horizontal and stable posi-

tion. Do not place anything directly on top of the

DVD/VCR. Do not place the DVD/VCR directly on top

of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes

on the sides of the DVD/VCR. Avoid locations subject

to strong vibration or strong magnetic fields.

Playback

¡S-VHS Quasi Playback (SQPB)

(Allows you to view a tape recorded in S-VHS format.)

¡Auto Repeat

¡2 Step Picture Search Operation

¡Index Search

¡Time Search

Recording

¡1 Year, 7 events (including Daily and Weekly Timer

Recording)

¡OTR (One Touch Recording)

PRECAUTIONS

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your DVD/VCR,

unplug the power cord immediately and take the unit to

our Authorized Service Center for servicing.

• Do not put your fingers or objects into the DVD/VCR

cassette holder.

MOISTURE CONDENSATION WARNING

Moisture condensation may occur inside the unit when it is

moved from a cold place to a warm place, or after heating a

cold room or under conditions of high humidity. Do not use

the DVD/VCR at least for 2 hours until its inside is dry.

–8–EN

1L25

ABOUT THE DISCS

The following discs can be played back on this

DVD/VCR.

This player conforms to the NTSC color system. You can-

not play discs recorded in other color systems such as

PAL or SECAM.

¡Some discs include region codes as shown below.

¡The number inside the symbol refers to a region of the

world, and a disc encoded in a specific region format

can only be played back on DVD/VCR with the same

region code.

The following discs cannot be played back on this

DVD/VCR.

¡DVD with region codes other than 1 or ALL.

¡DVD-ROM

¡DVD-RAM (Never attempt to play back,

otherwise a malfunction may result.)

¡CD-ROM

¡VSD

¡CDV (Only plays back the audio part.)

¡CD-G (Only plays back the sound.)

¡CD-R/CD-RW

(Only plays back discs on which audio CD or

MP3 are recorded.)

¡CD-I

(Never attempt to play back, otherwise a mal-

function may result.)

¡SACD

¡Photo CD

(Never attempt to play back, otherwise a mal-

function may result.)

¡Video CD

(Never attempt to play back, otherwise a mal-

function may result.)

Any other discs without compatibility indications

PLAYABLE DISCS

DVD

Video

12 cm

Approx. 4 h

(single-sided)

Approx. 80 min

(single-sided)

8 cm

Logo Maximum

Playback Time

ContentsDisc Type

Sound

and

Pictures

Disc Size

74 min

Approx. 8 h

(double-sided)

Approx. 160 min

(double-sided)

12 cm

20 min

8 cm

(singles)

Audio

CD Sound

[DVD]

Data on a DVD is divided into sections called "titles", and

then into subsections called "chapters", each of which is

given a title or chapter number. Playback conditions are

preset on some DVD video discs, and these playback con-

ditions take priority over user operations on this player. If

a function you selected does not run as desired, refer to

the manual accompanying the disc.

DISC TYPES

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4

[AUDIO CD]

Data on an audio CD is divided into sections called

“tracks”, each of which is given a track number.

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

[MP3]

Data on an MP3 is divided into sections called "albums",

and then into subsections called "tracks", each of which is

given an album or track number.

Example

Album 1 Album 2

Track 1 Track 2 Track 1 Track 2Track 3 Track 4

–9–EN

1L25

OPERATING CONTROLS AND FUNCTIONS

OPEN/CLOSE

STOP SKIP/REV PLAY FWD/SKIP

DVD OPERATION VCR OPERATION

STOP/EJECT

REW PLAY F.FWD REC/OTR

OUTPUT

POWER

VIDEO

AUDIO

TIMER

SET

VCR/TV

CST.IN

CHANNEL

1 2 3 64 87 9

1113

FRONT PANEL

REMOTE CONTROL

123

456

789

010

SPEED AUDIO

POWER

SKIP/CH.

SLOW

VCR/TV

+100

DISPLAY PAUSE

PLAY

STOP

RECORD

ENTER

RETURNTITLE

SETUP

CLEAR/

C.RESET

ZOOMMODE

ANGLE

MODE

REPEAT

SUBTITLE

DVD VCR

35 36

41 40

43 44

1. Disc loading tray

2. DVD OUTPUT Light (Green) [page 13]

This light appears when the DVD output mode is

selected. You can only watch DVDs when the green

DVD OUTPUT Light is on. To make the green DVD

OUTPUT light come on, press the DVD button on

the remote control or the OUTPUT button on the

front panel.

3. VCR OUTPUT Light (Green) [page 13]

This light appears when the VCR output mode is

selected. You can only watch tapes when the green

VCR OUTPUT light is on. To make the green VCR

OUTPUT light come on, the VCR button on the

remote control or the OUTPUT button on the front

panel.

4. CASSETTE COMPARTMENT

5. REC/OTR Light [page 20]

Lights up during recording.

6. TIMER SET Light [page 21]

This light glows when the DVD/VCR is in standby

mode or off for a timer recording or during a One-

Touch Recording. It flashes if the TIMER SET but-

ton is pressed for a timer recording, but there is no

tape in the DVD/VCR. It flashes when all timer

recordings or One-Touch Recordings are finished.

7. POWER Button [page 17]

Press to turn the power on and off.

8. POWER Light

Lights up when the power is on.

9. VIDEO In Jack

Connect a video cable coming from the video out

jack of a camcorder, another VCR, or a video source

(laser disc player, camcorder, etc.) here.

10. AUDIO In Jacks

Connect audio cables coming from the audio out jacks

of a camcorder, another VCR, or an audio source here.

11. TIMER SET Button [page 21]

Press to put the DVD/VCR into standby mode for a

timer recording.

12. CASSETTE IN Light [page 19]

Lights up when a cassette is in the DVD/VCR.

13. VCR/TV Light [page 17]

Lights up when the DVD/VCR is in the VCR posi-

tion, and goes off when it is in the TV position.

14. CHANNEL Buttons [page 17]

In VCR mode, press to change TV channels on the

DVD/VCR; press to adjust the tracking during nor-

mal or slow motion playback; press to remove verti-

cal jitter in a Still picture.

15. REC/OTR Button (VCR) [page 20]

Press once to start a recording. Press repeatedly to

start a One-Touch Recording.

16. F.FWD Button (VCR) [page 17]

Press to rapidly advance the tape, or view the picture

rapidly in forward during playback. (Forward

Search). When setting program (For example:setting

clock or timer program), press to determine your

selection and proceed to the next step you want to

input. Press to determine the setting modes from the

on screen menu. Press to add or delete channel num-

bers during channel preset.

17. PLAY Button (VCR) [page 17]

Press to begin playback. Press to enter digits when

setting program (For example: setting clock or timer

program). Press to select the setting modes from the

on screen menu.

18. REW Button (VCR) [page 18]

Press to rewind the tape, or to view the picture rapid-

ly in reverse during the playback mode (Rewind

Search). Press to cancel a setting of timer program.

Press to correct digits when setting program (For

–10 –EN

1L25

example: setting clock or timer program). Press to

add or delete channel numbers during channel preset.

19.

STOP/EJECT Button (VCR) [

page 21

]

●EJECT Button

Press to remove the tape from the VCR.

●STOP Button

Press to stop the tape motion. Press to enter digits

when setting program (For example:setting clock

or timer program). Press to select the setting

modes from the on screen menu.

20. OUTPUT Button [page 13]

Press to select DVD mode or VCR mode.

●You can switch the output mode either by pressing

the OUTPUT button on the front panel, or by

pressing the DVD or the VCR button on the remote

control. However, if you press the OUTPUT but-

ton on the front panel first, you need to re-select

the corresponding mode by pressing the DVD

or the VCR button on the remote control.

21.

FWD/SKIP Button (DVD) [page 25]

Plays back from the beginning of the next chapter or

track. Hold down to fast forward playback.

22. PLAY Button (DVD) [page 23]

Press to begin playback.

23. SKIP/REV Button (DVD) [page 25]

Plays back from the beginning of the current chapter

or track. Hold down to fast reverse playback.

24. STOP Button (DVD) [page 23]

Stops operation of the disc.

25. OPEN/CLOSE Button [page 23]

Press to insert discs into or remove them from the tray.

26. Display, Remote Sensor Window

27. SPEED Button [page 20]

Press to select the VCR’s recording speed (SP or SLP)

28. POWER Button

Press to turn the power on and off.

29. Number Buttons

●DVD mode [page 25]

Press to directly select a Track (Audio CD) for

playback.

Press to program Tracks (Audio CD) for playback.

●VCR mode [page 25]

Press to select TV channels on the DVD/VCR.

To select channels, enter channel numbers as a

two-digit number for the quickest results. For

example, to select channel 6, press 0 then 6.

+100 Button:

If you want to select channels 100 and above, press

this button first, then press the last two digits. For

example, to select channel 125, press +100 button

first, then press 2 and 5.

30. DISPLAY Button

●DVD mode [page 13]

Press to access or remove the display screen during

DVD or Audio CD playback.

●VCR mode [page 13]

Press to access or remove the VCR’s on-screen sta-

tus display.

31. DVD Button [page 13]

Press to select DVD mode for the remote control.

●You can switch the output mode either by pressing

the OUTPUT button on the front panel, or by

pressing the DVD or the VCR button on the remote

control. However, if you press the OUTPUT but-

ton on the front panel first, you need to re-select

the corresponding mode by pressing the DVD

or the VCR button on the remote control..

32. hButton

●DVD mode

Press to view the DVD picture in fast reverse

motion or to reverse playback of an Audio CD.

●VCR mode

Press to rewind the tape, or to view the picture

rapidly in reverse during the playback mode

(Rewind Search). Press to cancel a setting of

timer program. Press to correct digits when setting

program (For example: setting clock or timer pro-

gram). Press to add or delete channel numbers

during channel preset.

33. Stop Button

Press to stop the tape motion. Press to enter digits

when setting program (For example: setting clock or

timer program). Press to select the setting modes

from the on screen menu.

34. RECORD Button

Press once to start a recording. Or, press repeatedly

to start a One-Touch Recording.

35. MENU Button

●DVD mode [page 23]

Press to display the menu of the Disc.

●VCR mode [page 17]

Press to access the VCR menu.

36. TITLE Button

37. SETUP Button [page 34]

Press to enter the setup mode.

38. ZOOM Button [page 28]

Enlarges part of a DVD-reproduced image.

39. MODE Button [pages 26]

Activates program playback or random playback

mode when playing CDs or MP3. Sets Black level or

SRS TruSurround.

40. SUBTITLE Button [page 32]

Press to select the desired subtitle language.

41. ANGLE Button [page 32]

Press to change the camera angle to see the sequence

being played back from a different angle.

42. REPEAT Button [page 27]

Repeats playback of the current disc, title, chapter or

track.

43. A-B REPEAT Button [page 27]

Repeats playback of a selected section.

44. SEARCH MODE Button

●DVD mode [page 25]

Press to access or remove the Search display,

which allows you to go directly to a specific

Title/Chapter/Track/Time.

●VCR mode [page 19]

Press to perform a Time Search or an Index Search.

45. CLEAR/C.RESET Button

●DVD mode [page 26]

Press to reset the setting.

●VCR mode [page 18]

Press to reset the counter. Press to exit from the

MENU screen.

46. RETURN Button

Returns to the previous operation.

47. Arrow Buttons

Use when making settings while watching the

display on a TV screen.

48. ENTER Button

Press to accept a setting.

–11 –EN

1L25

49. gButton

●DVD mode

Press to fast forward the Disc. Press the Pause but-

ton, then press the FWD button to begin slow

motion playback. Press the FWD button repeated-

ly to change the forward speed of slow motion.

●VCR mode

Press to rapidly advance the tape, or view the pic-

ture rapidly in forward during playback (Forward

Search). When setting program (For example: set-

ting clock or timer program), press to determine

your selection and proceed to the next step you

want to input. Press to determine the setting

modes from the on screen menu. Press to add or

delete channel numbers during channel preset.

50. PLAY Button

●DVD mode

Press to begin playback.

●VCR mode

Press to begin playback. Press to enter digits when

setting program (For example: setting clock or

timer program). Press to select the setting modes

from the on screen menu.

51. VCR Button [page 13]

Press to select VCR mode for the remote control.

●You can switch the OUTPUT mode either by

pressing the OUTPUT button on the front panel, or

by pressing the DVD or the VCR button on the

remote control. However, if you press the OUTPUT

button on the front panel first, you need to re-

select the corresponding mode by pressing the

DVD or the VCR button on the remote control.

52. PAUSE Button

●DVD mode [page 24]

Press to pause Disc playback. Press repeatedly to

advance the DVD picture step by step (or one

frame at a time).

●VCR mode [page 19]

While recording, press to temporarily stop the

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

CbR

AUDO

VIDEO

CH3 CH4

ANT - OUT

6766 65 64 63 62 61

5857 59 60

recording (pause). Press a second time to resume

normal recording. You can not pause a One-Touch

Recording. Or, press during tape playback to

freeze the picture. Press to advance the picture one

frame at a time during still mode.

53. SLOW Button [page 19]

During tape playback, press to view the video tape in

slow motion. Press again to resume normal playback.

This button does not affect DVD playback.

54. VCR/TV Button [page 21]

Use to select VCR or TV position. If the VCR/TV

light appears on the front of the DVD/VCR, it is in

VCR position (in either VCR or DVD mode). If the

VCR/TV light doesn’t appear on the front of the

DVD/VCR, it is in TV position.

●VCR Position

When the green VCR OUTPUT light appears on the

front of the DVD/VCR, use the VCR to watch a tape,

watch a TV program while recording it, or watch a

TV broadcast using the CHANNEL or the Number

buttons to change channels at the DVD/VCR.

When the green DVD OUTPUT light appears on

the front of the DVD/VCR, use the DVD/VCR to

view Disc playback or menus.

●TV Position

Use to watch TV (changing channels at the TV) or

watch one program while recording another.

55. SKIP/CH. Buttons

●DVD mode

Press to skip Chapters or Tracks.

●VCR mode

Press to change TV channels on the DVD/VCR.

56. AUDIO Button [page 31]

Press to select a desired audio language or sound mode.

57. AC Power Cord

Connect to a standard AC outlet to supply power

to the DVD/VCR.

58. AUDIO IN Jacks

Connect audio cables coming from the audio out

jacks of a camcorder, another VCR, or an audio

source here.

59. DVD/VCR AUDIO OUT Jacks

Connect the supplied audio cables here and to the

Audio In jacks of a television or other audio

equipment.

60. COMPONENT VIDEO OUT Jacks

Connect optional component video cables here

and to the component Video In jacks of a televi-

REAR VIEW

Notes

¡To use the remote control to operate the DVD/VCR

and its features, press the DVD button on the remote

control before pressing other DVD buttons. Verify

that the green DVD OUTPUT Light is on.

¡To use the remote control to operate the VCR and its

features, press the VCR button on the remote control

before pressing other VCR buttons. Verify that the

green VCR OUTPUT Light is on.

–12 –EN

1L25

DISPLAY DISPLAYS DURING

OPERATION

LOADING THE BATTERIES

Lit when the inserted

disc is being played back.

Lights up when a

CD is inserted on

the tray.

Lights up when a DVD

is inserted into the tray.

Lights up when the

inserted disc comes

to a pause.

Lit when the

A-B repeat function

is on.

Lit when the

repeat function is on.

Displays how long the current title

or track has been playing. When a

chapter or track is switched, the

number of the new title, chapter or

track is displayed.

Power on

No disc inserted

Tray open

Tray closed

Loading the Disc

Power off

1. Open the battery compartment

cover.

2. Insert two AA batteries, with each

one oriented correctly.

3. Close the cover.

Notes

¡Do not mix alkaline and manganese batteries.

¡Do not mix old and new batteries.

sion.

61. COAXIAL Jack

Connect an optional coaxial digital audio cable

here and to the Coaxial Digital Audio In jack of a

decoder or audio receiver.

62. S-VIDEO OUT Jack

Connect an optional S-Video cable here and to

the S-Video In jack of a television.

63. DVD/VCR VIDEO OUT Jack

Connect the yellow video cable (supplied) here

and to the TV’s Video In jack.

64. VIDEO IN Jack

Connect a cable coming from the video out jack

of a camcorder, another VCR, or an audio-visual

source (laser disc player, video disc player, etc.)

here.

65. CH3/CH4 Switch

Set to channel 3 or 4 to use your TV with your

DVD/VCR.

66. ANT-IN (Antenna In) Jack

Connect your antenna, Cable Box, or Direct

Broadcast System.

67. ANT-OUT (Antenna Out) Jack

Use the supplied RF coaxial cable to connect this

jack to the ANTENNA IN Jack on your TV.

Notes

¡The S-VIDEO OUT jack, COAXIAL jack, OPTI-

CAL jack, and COMPONENT VIDEO OUT jacks

are only useful in DVD mode.

–13 –EN

1L25

VCR/DVD SWITCHING

Since this product comprises VCR and DVD players, it is necessary to select the correct

output mode.

OPEN/CLOSE

STOP SKIP/REV PLAY FWD/SKIP

DVD OPERATION VCR OPERATION

STOP/EJECT

REW PLAY F.FWD REC/OTR

OUTPUT

POWER

VIDEO

AUDIO

TIMER

SET

VCR/TV

CST.IN

CHANNEL

LAY FWD/SKIP

VD OPERATION VCR OPERATIO

STOP/EJECT

REW

OUTPUT

123

456

789

010

SPEED AUDIO

POWER

SKIP/CH.

SLOW

VCR/TV

+100

DISPLAY PAUSE

PLAY

STOP

RECORD

ENTER

RETURNTITLE

SETUP

CLEAR/

C.RESET

ZOOMMODE

ANGLE

MODE

REPEAT

SUBTITLE

DVD VCR

DVD button

VCR button

OUTPUT button

DVD OUTPUT Light

VCR OUTPUT Light

Press the VCR button on the remote control.

(Verify that the VCR OUTPUT Light is lit.)

SWITCHING TO VCR MODE

Notes

¡Pressing only the OUTPUT button on the front panel does not switch the mode of the remote control. You

always need to select the correct mode on the remote control too.

Press the DVD button on the remote control.

(Verify that the DVD OUTPUT Light is lit.)

SWITCHING TO DVD MODE

–14 –EN

1L25

FOR TVs WITH S-VIDEO INPUT JACK

Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy higher quality pic-

tures.

The S-Video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in order to

use the VCR features or view TV channels on the DVD/VCR, you still need to either connect the RF coaxial cable

between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable as

described earlier (Fig.1). To connect the supplied RF coaxial cable, see “DVD/VCR TO TV CONNECTION”

above.

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

AUDO

VIDEO

CH3 CH4

ANT - OUT

To S-VIDEO OUT jackTo S-VIDEO INPUT jack

To Right (red) and Left (white)

AUDIO OUT jacksAUDIO INPUT jacks

A/V-compatible or

wide screen TV

[Fig. 2]

CONNECTING TO A TV THAT HAS AN

S-VIDEO INPUT JACK OR COMPONENT VIDEO IN JACKS

CONNECTING TO A TV

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

AUDO

VIDEO

CH3 CH4

ANT - OUT

A/V-compatible or

wide screen TV

To VIDEO OUT jack

To VIDEO INPUT jack

To Right (red) and Left (white)

Antenna/Cable signal

To ANT. IN

of TV

AUDIO INPUT jacks AUDIO OUT jacks

[Fig. 1]

Notes

¡Connect the DVD/VCR directly to a TV. If the A/V cables are connected to a VCR, pictures may be

distorted due to the copy protection system.

DVD/VCR TO TV CONNECTION

1. Disconnect the AC power cord of the TV from the

AC outlet.

2. Disconnect the antenna or cable from the TV.

3. Connect the antenna or cable to the ANT-IN jack of

the DVD/VCR.

4. Connect the DVD/VCR to the TV using the coaxial

cable.

5. Plug the AC power cords of the DVD/VCR and TV

into the AC outlets.

ANT - IN

CH3 CH4

ANT - OUT

[VHF/UHF

combination antenna] [Back of the DVD/VCR]

IN OUT

[Cable box or satellite box]

[Indoor antenna] [Back of the

UHF/VHF combination TV]

UHF/VHF

Coaxial cable

(supplied)

From Cable or

Satellite Company

If your TV does not have A/V terminals:

When the DVD/VCR is in the VCR Playback mode or

when the DVD/VCR is in the VCR mode, your TV will

receive signals from the DVD/VCR on either channel

3 or channel 4. To use the DVD/VCR with your TV, set

the selector switch to CH3 or CH4 (which is located in

the back of your DVD/VCR), whichever is not used for

normal broadcasts in your area. Then set your TV to

the same channel.

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that pro-

vides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected

to the grounding system of the building, as close to the point of cable entry as practical.

ANT - IN

CH3 CH4

ANT - OUT

[Back of the DVD/VCR]

CH3 CH4

SETTING THE CH3/CH4

SWITCH

HOOKUPS

–15 –EN

1L25

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

AUDO

VIDEO

CH3 CH4

ANT - OUT

A/V-compatible

wide screen TV

To COMPONENT VIDEO

INPUT jacks

To COMPONENT VIDEO

OUT jacks

To Right (red) and Left (white)

AUDIO INPUT jacks

To Right (red) and Left (white)

AUDIO OUTPUT jacks

[Fig. 3]

FOR TVs WITH COMPONENT VIDEO IN JACKS

Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher qual-

ity pictures.

The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in

order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coax-

ial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video

cable as described earlier (Fig. 1). To connect the supplied RF coaxial cable, see “DVD/VCR TO TV CONNEC-

TION” on page 14.

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS SUCH AS MD DECK OR DAT DECK

Use an audio coaxial digital cables (not included) for the audio connections.

Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.

Amplifier equipped with digital

input jacks, MD deck,

DAT deck, etc.

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

AUDO

VIDEO

CH3 CH4

ANT - OUT

To COAXIAL DIGITAL

AUDIO INPUT jack

To COAXIAL DIGITAL

AUDIO OUT jack

Notes

¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital

sound by an MD or DAT deck.

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.

¡Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD disc using incorrect set-

tings may generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital and

DTS to on)

[Fig. 4]

–16 –EN

1L25

CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER

If using this DVD/VCR to play a DVD disc in 5.1 channel Dolby Digital surround, or DTS surround formats,

the DVD/VCR outputs a Dolby Digital, or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack.

By hooking the DVD/VCR up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic

ambience with powerful and high-quality surround sound of a professional standard such as can be heard in

movie theaters.

Use an audio coaxial digital cables (not included) for the audio connections.

Front speaker

(left)

Center speaker Front speaker

(right)

Surround

speaker

(left)

Surround

speaker

(right)

Subwoofer

Dolby Digital,

DTS decoder

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

AUDO

VIDEO

ANT - OUT

To COAXIAL DIGITAL

AUDIO OUT jack

To COAXIAL DIGITAL

AUDIO INPUT jack

CH3 CH4

[Fig. 5]

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

Notes

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.

¡If the output is Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio

output in the setup mode.

¡If the output is DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode.

¡Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out-

put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also

damage the speakers.

“DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems Inc.

Notes

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR.

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

AUDO

VIDEO

CH3 CH4

ANT - OUT

To Right (red) and Left (white)

AUDIO OUT jacks

Stereo system

To ANALOG AUDIO INPUT jacks

CONNECTING TO AN ANALOG AUDIO

[Fig. 6]

5 Begin channel preset by pressing the F.FWD

button once. The tuner scans and memorizes

all active channels in your area.

¡The DVD/VCR distinguishes

between standard TV channels

and cable channels.

6 After scanning, the tuner stops on the lowest

memorized channel.The TV screen returns to

TV mode.

¡If “AUTO SET UP” appears on the TV screen again,

check the cable connections. Press the F.FWD but-

ton once again and the DVD/VCR will begin preset

again.

–17 –EN

1L25

AUTOMATIC CHANNEL SET UP

SETUP

The DVD/VCR can automatically program the tuner to

scan only the channels which are available in your area.

¡Channel memory programming is NOT needed

when the DVD/VCR is connected to a cable box or

a satellite box as in "DVD/VCR TO TV CONNEC-

TION" on page 14. In this case, set the CH3/CH4

Switch (which is located on the back of your VCR)

to either CH3 or CH4, whichever is not used for nor-

mal broadcasts in your area. Then set your TV to the

same channel. The channel you want to record or

view will be selected from the cable or the satellite

box.

¡Follow the steps below once. Repeat only if there is

a power failure or if the DVD/VCR is unplugged for

more than 30 seconds. (In these cases, the pro-

grammed channels are erased.)

¡You must follow the steps below before attempting to

play or record a video tape.

1 You need to connect the antenna or cable to

the DVD/VCR first. Then, connect the DVD

/VCR power plug to a standard AC outlet.

2 Turn on the TV and set the TV to channel 3 or

¡Now set the CH3/CH4 switch on the back of the

DVD/VCR to match the channel selected on the TV.

3 Turn on the DVD/VCR by pressing the

POWER button. Both the POWER and the

VCR/TV light will come on.

4 Select the On Screen Language (“ENGLISH”,

“FRANCAIS”or “ESPAÑOL”) by pressing the

PLAY or the STOP button.

Then, press the F.FWD but-

ton.

VCR

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using the

CHANNEL(o/p) buttons or by directly pressing the

Number buttons on the remote control.

Note for using the Number buttons:

¡When selecting cable channels which are higher than

99, press [+100] first, then press the last two digits.

¡You must precede single-digit channel numbers with

a zero (For example: 02, 03, 04 and so on).

TO PRESET THE CHANNELS AGAIN

1 Press the MENU button until the main menu

appears. (If you have already set the clock,

you only have to press it once. If not, you

have to press it twice).

2 Select “CHANNEL SET UP”by pressing the

PLAY or the STOP button. Then, press the

F.FWD button.

3 Select “AUTO SET UP”by pressing the PLAY

or the STOP button. Then, press the F.FWD

button.

¡After scanning, the tuner stops on the lowest memo-

rized channel.

AUTO SET UP

CH 01

–18 –EN

1L25

CLOCK SET UP

Set the clock accurately for proper automatic timer

recording. We suggest that you use a TV or radio sta-

tion as your time source.

1 Press the MENU button twice to call up the

main menu. (If you have already set the

clock, you only have to press it once).

¡If the clock is not set, the CLOCK SET menu

appears first. In this case, follow step [3].

2 Select "CLOCK SET" by pressing the PLAY

or the STOP button. Then, press the F.FWD

button

3 Set the clock.

¡To go back one step, press the REW button.

4 Start the clock by pressing the

CLEAR/C.RESET or the F.FWD button.

VCR

CLOCK SET

MONTH DAY YEAR

03 / 18 MON 2002

HOUR MINUTE AM/PM

05 : 40 PM AM

1) Set the month

Press the PLAY button or the STOP button repeatedly.

Then, press the F.FWD button.

2) Set the day

Press the PLAY button or STOP repeatedly.

Then, press the F.FWD button.

3) Set the year

Press the PLAY button or the STOP button repeatedly.

Then, press the F.FWD button.

The day of the week will appear automatically.

4) Set the hour

Press the PLAY button or the STOP button repeatedly.

Then, press the F.FWD button.

5) Set the minute

Press the PLAY button or the STOP button repeatedly.

Then, press the F.FWD button.

6) Set AM or PM

Press the PLAY button or the

STOP button repeatedly.

TO CHANGE THE ON-SCREEN

LANGUAGE

1 Press the MENU button twice to call up the

main menu. (If you have already set the

clock, you only have to press it once).

2 Select "LANGUAGE SELECT" by pressing

the PLAY or the STOP button.Then, press the

F.FWD button.

3 Select "ENGLISH", "FRANCAIS" or

"ESPAÑOL" by pressing the PLAY or the

STOP button. Then, press the

CLEAR/C.RESET button.

VCR

TO ADD/DELETE CHANNELS

When scanning, some channels may be skipped due to

a weak signal. In such cases, you can add the channels

to the DVD/VCR memory manually.

1 Press the MENU button until the main menu

appears. (If you have already set the clock,

you only have to press it once. If not you

have to press it twice).

2 Select "CHANNEL SET UP" by pressing the

PLAY or the STOP button. Then, press the

F.FWD button.

3 Select "MANUAL SET UP" by pressing the

PLAY or the STOP button. Then, press the

F.FWD button.

4 Enter the desired channel number by press-

ing the PLAY or the STOP button.

5 Add or Delete it from memory by pressing the

F.FWD or the REW button so that "ADD" or

"DELETE" flashes on the TV screen accord-

ingly.

6 Exit the Preset mode by pressing the

CLEAR/C.RESET button.

- MENU -

TIMER PROGRAMMING

AUTO REPEAT

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

[OFF]

[ON]

PICTURE SEARCH

If you want to skip or repeat a scene during playback,

press the F.FWD or the REW button.

¡Press it again and the DVD/VCR will now search at

super high speed. (in the LP/SLP modes only).

INDEX SEARCH

The index signal is recorded on the tape automatically

when the recording is started. If you want to view a

recording at a specific start point, this can be done easily.

1 Press the SEARCH MODE button so that the

Index Search menu appears.

2 Enter your desired number by pressing the

PLAY or the STOP button

within 30 seconds.

3 Press the F.FWD or the REW button to start

index search.

¡If you want to go in the forward direction, press the

F.FWD button. If you want to go in the reverse

direction, press the REW button.

¡After index search, the DVD/VCR will play the tape

automatically.

TIME SEARCH

This feature allows you to fast forward or rewind the

tape for the desired length of time.

1 Press the SEARCH MODE button twice so

that the Time Search menu appears.

2 Enter your desired time to

skip by pressing the PLAY

or the STOP button within

30 seconds.

3 Press the F.FWD or the REW button to start

time search.

If you want to go in the forward direction, press the

F.FWD button.

¡If you want to go in the reverse direction, press the

REW button.

¡After time search, the DVD/VCR will play the tape

automatically.

VCR

–19 –EN

1L25

PLAYBACK FUNCTION

NORMAL PLAYBACK

1 Insert a prerecorded tape. The DVD/VCR will

turn on, and the VCR/TV Light

and the CST IN Light comes

on.

¡If the safety tab has been removed, the DVD/VCR

will start playback automatically.

Turn on the TV and set the TV to channel 3 or 4.

¡Now set the CH3/CH4 switch on the back of the

DVD/VCR to match the channel selected on the TV.

3 Begin playback by pressing the PLAY button.

¡Tracking adjustment will be done automatically

(Digital Tracking function) when you start playback.

To adjust the tracking manually, press the CHAN-

NEL(o/p) buttons on the DVD/VCR.

¡When a tape has reached the end, the DVD/VCR

will automatically rewind the tape to the beginning,

and eject the tape.

¡S-VHS Quasi Playback (SQPB): This unit allows

you to view a tape recorded in S-VHS format.

(Noise lines may appear on the picture.)

4 To stop playback, press the STOP button.

VCR

PAUSE/STILL/SLOW

You can freeze the picture on TV screen by pressing

the PAUSE button during playback.

¡You can advance the picture by one frame at a time

by pressing the PAUSE button during the Still mode.

¡If the picture begins to vibrate vertically during the

still mode, stabilize the picture by pressing the

CHANNEL(o/p) buttons.

¡If the picture is distorted or rolling vertically, adjust

the vertical hold control on your TV, if so equipped.

You can watch in the slow motion by pressing the

SLOW button during playback or the still mode.

¡If a noise bar appears on the TV screen, you can

reduce it by pressing the CHANNEL(o/p) buttons.

¡After the DVD/VCR has been in Still/Slow mode for

5 minutes, it will stop automatically to protect the

tape and the video head from damage.

¡To return to playback, press the PLAY button.

AUTO REPEAT PLAYBACK

This feature allows you to play a tape over and over.

1 Select main menu by pressing the MENU

button.

VCR

SEARCH FUNCTIONS

2 Select "AUTO REPEAT" by pressing the

PLAY or the STOP button.

3 Begin auto repeat playback by pressing the

F.FWD button so that [ON] appears next to

"AUTO REPEAT".

¡If the on-screen menu still remains, press the

CLEAR/C.RESET button to exit the menu.

To cancel the Auto repeat mode, press the F.FWD button at

step [3] so that [OFF] appears next to "AUTO REPEAT".

TIME SEARCH

2 : 50

INDEX SEARCH

–22 –EN

1L25

COPYING A VIDEO TAPE

SPECIAL FEATURES

You can make copies of video tapes made by friends or

relatives for your enjoyment.

Warning:

Unauthorized recordings of copyrighted video tapes

may be an infringement of copyright laws.

Connect the recording DVD/VCR (this unit), the play-

ing VCR (another source) and your TV using the fol-

lowing diagram.

¡You can use the AUDIO/VIDEO input jacks on the

front panel of the DVD/VCR instead of using the

jacks on the back.

1 Insert a pre-recorded tape into the playing

VCR.

2 Insert a tape with a safety tab into the

recording VCR.

3 Press the SPEED button on the recording

VCR to select the desired recording speed

(SP/SLP).

When you use the A/V input jacks on the back of the

DVD/VCR, select "L1" position by pressing [0], [0], [1]

on the remote control or the CHANNEL(o/p) buttons.

When you use the A/V input jacks on the front of the

DVD/VCR, select "L2" position by pressing [0], [0], [2]

on the remote control or the CHANNEL(o/p) buttons.

Note

“L1” and “L2” are found before the lowest memo-

rized channel. (Example: CH2)

Press the REC/OTR button on the recording VCR.

5 Begin playback of the tape in the playing

VCR.

¡For best results during dubbing, use the

DVD/VCR’s front panel controls whenever possi-

ble. The remote control might affect the playing

DVD/VCR’s operation.

VCR

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

AUDO

VIDEO

3CH 4CH

ANT - OUT

ANT in

[TV set]

(Use for monitoring)

Coaxial cable

(supplied)

[Playing VCR]

(another source)

Audio/Video cables

(not supplied)

OUT

AUDIO VIDEO

LEFT

RIGHT

[Recording VCR]

(this unit)

MTS (Multi-Channel Television

Sound) SYSTEM

When you play a VHS tape, or receive a broadcast on the

DVD/VCR tuner channel you are watching, the current

status will appear when you press

the DISPLAY button on the

remote control. When you record a

MTS broadcast signal, you need to

set it to MTS mode.

1)* When a program is broadcast in stereo,

STEREO appears. When a program is

broadcast in second audio, SAP appears.

Although a program may be broadcast in both stereo

and sub audio, you must select the Recording mode to

TV STEREO or SAP before you record a broadcast.

2)* While the VCR is set in HiFi stereo mode,

HiFi appears on the TV screen. While the

VCR is set in monaural (MONO) mode,

HiFi disappears from the TV screen.

¡If you play non-HiFi tapes while the VCR is set in

HiFi, HiFi will disappear from the TV screen and the

VCR will automatically play in monaural.

VCR

¡Always use video-quality shielded cables with

RCA-type connectors. Standard audio cables are not

recommended.

¡You can use a video disc player, satellite receiver, or

other audio/video component with A/V outputs in

place of the playing VCR.

TO MONITOR THE RECORDING

Turn on the TV and set the TV to channel 3 or 4.

¡Now set the CH3/CH4 switch on the back of the

DVD /VCR to match the channel selected on the TV.

2 Press the VCR/TV button on the recording

VCR so that the VCR/TV Light comes on.

MTS RECORDING/MONITOR MODE

Type of

broadcast Hi-Fi audio track

(2-channel) Normal audio

track

Regular

(monaural audio)

-None- Mono

Stereo

broadcast STEREO L+R

Bilingual

broadcast

SAP Main audio

program

Sub audio

program

Stereo &

Bilingual

broadcast

STEREO

SAP L+R

STEREO/SAP

Selection

-Invalid-

- nvalid-

TV STEREO*

SAP*

TV STEREO*

SAP*

L-channel

Mono

Main audio

program

Sub audio

program

Sub audio

program

R-channel

Mono

Main audio

program

Sub audio

program

Sub audio

program Sub audio

program

Display on the

TV screen

STOP 12:00AM

CH 32

STEREO

SAP

SP 0:00:00 HIFI

1)*

2)*

–23 –EN

1L25

PLAYING A DVD VIDEO

OR AN AUDIO CD

Getting started

Turn on the power of the TV, amplifier and any other

components which are connected to the DVD/VCR.

(Change the input system to suite the DVD/VCR, and

check that the sound volume is correct).

1 Press the POWER button.

¡The power will turn on.

Check that the DVD OUTPUT Light is lit. If not

press the DVD button on the remote control to

switch to DVD/VCR mode.

2 Press the OPEN/CLOSE button.

¡The disc loading tray will open.

3 Place a disc into the tray.

¡Make sure the disc is sitting properly in the correct

recess, with the label side up.

4 Press the PLAY button.

¡The tray will close automatically, and playback will

then start from the first chapter or track of the disc.

You need to press the PLAY button only when the

tray has been closed by pressing the OPEN/CLOSE

button.

¡If your DVD has a title menu, it may appear on the

screen. In this case, refer to “USING THE DVD

MENUS” in the next section, or “USING THE

TITLE MENU” on page 24.

5 Press the STOP button to stop play.

CDDVD

Notes

¡A“prohibited icon” may appear at

the top-right on the TV screen

during operation, warning that a

prohibited operation has been

encountered by the DVD/VCR or

the disc.

¡If a disc is dirty or has scratches, the pictures may

appear distorted and the playback operation may

stop. In such cases, clean the disc and unplug the

power cord and then plug it again before resuming

playback.

¡With DVDs that use titles for playback program

signals, playback may start from the second title, or

it may skip these titles.

¡During the playback of a two layered disc, pictures

may stop for a moment. This happens when the 1st

layer switches to the 2nd layer. This is not a mal-

function.

PLAYING A DISC

USING THE DVD MENUS

Some DVDs contain their own menus, such as a guid-

ance menu which describes the contents of the disc or

a selection menu for sound, language and other cus-

tomized settings.

1 Press the MENU button.

¡The DVD menu will appear.

2 Select the desired title.

¡Press the arrow buttons (L/K/B/s) to change the

setting, and then press the ENTER button.

3 Playback will start from the selected title.

DVD

AUTO REWIND

When a tape reaches the end during recording, play-

back, or fast-forward, the tape will automatically

rewind to the beginning. After rewinding finishes, the

DVD/VCR will eject the tape.

¡The DVD/VCR will not rewind the tape automati-

cally during timer recording or One Touch

Recording.

REAL TIME TAPE COUNTER

¡This shows the elapsed recording or playback time

in hours, minutes, and seconds. (The displayed time

will not change during blank portions of the tape.)

¡The indication will appear when the tape is rewound

further than “0:00:00” on the tape counter.

–24 –EN

1L25

USING THE TITLE MENU

With a DVD containing a title menu, you can select the

desired titles from the menu.

1 Press the TITLE button.

¡The title menu will appear.

¡With some discs, a title menu may appear automati-

cally. In this case, skip to step 2.

2 Select the desired title.

¡Press the arrow buttons (L/K/B/s) to select a

desired title, and then press the ENTER button.

CALLING UP A MENU SCREEN

DURING PLAYBACK

For DVDs

¡Press the MENU button to call up the DVD menu.

¡Press the TITLE button to call up the title menu.

Note

¡The contents of menus and corresponding menu

operations may vary between discs. Refer to the

manual accompanying the disc for details.

DVD

PAUSING PLAYBACK OR

DISPLAYING A STILL PICTURE

1 Press the PAUSE button during playback.

¡Playback will pause, with sound

muted.

2 Press the PLAY button to resume playback.

CDDVD

STEPPING THROUGH FRAMES

1 Press the PAUSE button while playback is

paused.

¡The next picture frame is dis-

played with sound muted each

time the button is pressed.

2 Press the PLAY button to resume playback.

DVD

RESUMING PLAYBACK FROM

THE POINT WHERE

PLAYBACK STOPPED

Press 'PLAY' to play from here.

To play the beginning, press 'STOP' first

and then 'PLAY'.

1 Press the STOP button during playback.

¡Playback will stop, and then appear the resuming

message at the center.

2 Press the PLAY button. Playback will start

from the point where the previous playback

session was stopped.

Note

¡The resume function can be reset by pressing the

STOP button twice or by opening the disc loading

tray.

CDDVD

1 Press the FWD gor the REV hbutton

during playback.

¡For DVDs, pressing the FWD gor REV hbut-

ton cycles the playback speed in four steps. In the

case of DVDs, the sound will mute.

¡For audio CDs, the playback speed is fixed at ×16.

2 Press the PLAY button to return to normal

playback speed.

CDDVD

–25 –EN

1L25

FAST FORWARD/REVERSE

You can also press the SEARCH

MODE button and use the Number

buttons to enter the track number.

When the track number is entered in the entry box,

playback of the desired track will start automatically.

x30

x60

x30

x60

REV Button Button

FWD

SLOW MOTION

1 Press the FWD gbutton while playback is

paused. (Sound remains muted.)

¡Slow motion mode will be activated.

¡Pressing the FWD gbutton cycles the playback

speed in three steps. Select the appropriate speed

while referring to the speed indication on the screen.

2 Press the PLAY button to return to normal

playback speed.

Notes

¡Slow playback is not available with audio CDs.

¡Reverse slow motion is not available.

¡Slow playback from a TITLE to other TITLE is not

possible.

DVD

×1/16

×1/8

×1/2

Button

FWD

STARTING FROM A DESIRED

TRACK

1 Press the Number buttons to enter the

desired track number.

The selected track will be located, and playback will start.

TR : 5

PLAYING FROM A DESIRED

TITLE OR A CHAPTER

TRICKS WITH THE SKIP BUTTONS (H, G)

If the SKIP button Gis pressed during playback

or while playback is paused, the current track will

be skipped and the next track will start. If the SKIP

button His pressed once, the beginning of the

current track will be located for replay. If the SKIP

button His pressed again within 2 seconds

after playback begins, the previous track will be

located.

There are two ways you can jump to a desired title or

a chapter.

By using the ‘SEARCH MODE’button.

1 Press the ‘SEARCH MODE’button.

¡The title/chapter search display will be displayed.

2 If you wish to perform a title search, select

‘TT’. If you wish to perform a chapter search,

select ‘CH’with K/Lbuttons.

3 Enter the desired title or chapter number

with the Number buttons (If you are entering

a single digit number press “0”first).

¡When you finish entering the number, the selected

title or chapter will start automatically

Notes

¡If you didn’t press “0” before entering the single

digit number, you have to press ENTER to go to the

desired title or the chapter.

DVD

TT : 1/ 2

CH __ / 49

TT : _/ 12

CH : 12/ 49

–26 –EN

1L25

STARTING FROM A DESIRED

TIME COUNT

1 Press the SEARCH MODE button twice dur-

ing playback or while paused.

2 Press the Number buttons to set the desired

time count.

¡Example: 1 hour, 23 minutes and

30 seconds

1 →2 →3 →3 →0

CDDVD

By using only the Number buttons.

TITLE SEARCH:

Directly enter the desired title number with the

Number buttons with playback stopped.

CHAPTER SEARCH:

1 Directly enter the desired chapter number

with the Number buttons when the disc is

being played or paused.

¡When you finish entering the number, the selected

title or chapter will start automatically.

Notes

¡Play back from a desired title or chapter is not avail-

able with some DVDs.

¡If the title being played does not display the chapter

number, that means the chapter search function is

not available with that title.

TIME 1:23:30

TOTAL 1:29:00

Notes

¡For a DVD, Time Search in Title is effective. (But

Time Search in Chapter is ineffective.)

¡For a CD, Time Search in Track is effective. (But

Time Search in the entire disc is ineffective.)

¡Playback from a desired time count is not available

with some discs or if the unit is in stop mode.

¡If the wrong numbers are entered, press the

CLEAR/C.RESET button and re-enter the correct

numbers.

MARKER

RANDOM (Audio CD)

1 Press the MODE button in stop mode.

¡The program setting menu screen will appear.

2 Press the MODE button again.

You can define the part to be called back.

1 Press the SEARCH MODE button three

times during playback.

Set the marker

¡Using the cursor (s/B) buttons,

position the cursor on to the

marker number shown as “NOT SET”. Press the

ENTER button when the screen to be reviewed

appears. The marked time will be displayed. Up to

5 points can be marked.

Call back the marker

¡Using the cursor (s/B) buttons, position the cursor

on to the marker number to be called back and press

the ENTER button.

Clear the marker

¡Using the cursor (s/B) buttons, position the cursor

on to the marker number to be cleared and press the

CLEAR/C.RESET button.

To clear all markers, place the cursor on “AC” (All

clear markers) and press the ENTER button.

2 Press the SEARCH MODE button or the

RETURN button to exit the display.

CDDVD

RANDOM

EXIT : MODESTART : PLAY

3 Press the PLAY button. Random playback

will then start.

Note

¡Program playback is not available during random

playback.

TRICKS WITH THE SKIP BUTTONS (H, G)

If the SKIP button Gis pressed during playback or

while playback is paused, the current chapter will be

skipped and the next chapter will start. If the SKIP

button His pressed once, the beginning of the cur-

rent chapter will be located for replay. If the SKIP

button His pressed again within 2 seconds after

playback begins, the previous chapter will be locat-

ed.

1 2 3 4 5 AC

NOT SET

–27 –EN

1L25

REPEAT

1 Press the REPEAT button during playback.

For DVDs

¡A single title or chapter can be played back repeat-

edly.

¡Pressing the REPEAT button cycles the display on

the screen as follows.

For audio CDs

¡The whole disc or a single track can be played back

repeatedly.

¡Pressing the REPEAT button cycles the display on

the screen through Off, Track and All.

CDDVD

The current title is

played back repeatedly.

REPEAT

[OFF]

REPEAT

[CHAPTER]

REPEAT

[TITLE]

The current chapter is

played back repeatedly.

No repeat playback.

The whole disc is

played back repeatedly.

REPEAT

[ALL]

REPEAT

[TRACK] The current track is

played back repeatedly.

No repeat playback.

REPEAT

[OFF]

If the REPEAT button is pressed once dur-

ing program/random playback, the current

track will be played back repeatedly.

If the REPEAT button is pressed again, the

program/random playback will be per-

formed repeatedly.

Notes

¡Repeat playback is not available with some discs.

¡The REPEAT setting will be cleared when moving

to an other title, chapter or track.

¡Repeat playback does not function during A-B

repeat playback.

You can define a section to be played back repeatedly.

Press the A-B REPEAT button during playback.

¡The starting point (A) will then be

selected.

2 Press the A-B REPEAT button again at the

end point (B) of the desired section.

¡The selected section will be

played back repeatedly.

3 To exit A-B repeat playback, press the A-B

REPEAT button and set it to OFF.

Notes

¡With DVDs, the A-B repeat section can be set only

within the current title.

¡With audio CDs, the A-B repeat section can be set

within the current track.

¡A-B repeat is not available with some scenes in

DVD.

¡To cancel the A point which was set, press the

CLEAR/C.RESET button.

¡A-B repeat playback does not function when title,

chapter, or repeat (all) playback has been set.

CDDVD

A-B REPEAT

REPEAT

[ A - ]

REPEAT

[ A - B ]

REPEAT

[ OFF ]

–28 –EN

1L25

PROGRAM (Audio CD)

Press the MODE button in stop mode.

¡The program screen will appear.

PROGRAM TIME 0:00:00 1/1

RANDOM

: MODE

EXIT

: RETURN

START: PLAY

DELETE

: CLEAR

2 Press the Number buttons to enter the

desired track numbers.

¡50 programs can be displayed

at once on the screen. Press

“L” to go to the next page.

3 Press the PLAY button.

¡Playback will start in the programmed order.

¡While the program is being played back, the STOP

button works as follows.

¡Press the STOP button once and then press the

PLAY button again. Playback will restart from the

point where the STOP button was pressed. (Program

continued)

TO CLEAR THE PROGRAM

1 Press the STOP button twice, and the pro-

gram will be cleared.

Notes

¡Adding programs is not possible during program

playback. You must stop the current playback before

such operations can be carried out.

¡Press the CLEAR/C.RESET button to cancel a pro-

gram. The most recently entered program will then

be deleted.

¡Up to 99 programs can be entered.

¡Playback from a desired track and random playback

are not available during program playback.

¡Program settings will be cleared when the power is

turned off or the disc loading tray is opened.

¡Press the MODE button to check the programmed

setting.

¡The programs will be cleared when you turn the

power off.

02 05 07 04 10 14 06 15 21 08

20 28 10 25 35 12 30 42 11 34

49 16 40 58 18 45 63 01 03 _

PROGRAM TIME 2:07:43 1/1

RANDOM

: MODE

EXIT

: RETURN

START: PLAY

DELETE

: CLEAR

ZOOM PLAYBACK

(enlargement on-screen)

Images can be enlarged on the screen to your taste.

1 Press the ZOOM button during playback.

¡The image will be enlarged at the center of the

screen.

¡Pressing the ZOOM button cycles the zooming

images in two steps.

DVD

ZOOM [x4]ZOOM [x2] ZOOM [OFF]

2 When the cursor (K/L/s/B) button is

pressed during zoom play, the part to be zoomed

moves.

¡The zooming frame can be moved from the center 4

steps to the right, 4 steps to the left, 4 steps to the

top, and 4 steps to the bottom when times 2 zoom-

ing. The frames will move 6 steps when times 4

zooming.

¡The current position will be displayed on the right-

bottom of the screen. Press the ENTER button, and

the display will disappear.

Note

¡Zooming function does not work while the disc

menu is being shown.

Insert an MP3 file recorded on disc.

¡The MP3 menu screen is displayed.

¡Folders are referred to as

“Albums” and files are

referred to as “Tracks”.

¡“+” appears at the beginning

of the album name.

MP3

–29 –EN

1L25

PLAYING AN MP3 DISC

¡If all the tracks cannot be displayed at once on the

screen, “L” appears to go to the next page. If there

is a previous page, “K” appears on screen. To the

left of “L”, the current page and the total number of

pages are displayed.

¡The player can recognize 255 albums and tracks

altogether.

2 Using the K/Lbuttons, select a album or a

track to be played.

[When a TRACK is selected]

Starting from the selected track,

the rest of the tracks will be

played in order.

[When an ALBUM is selected]

Press the Bbutton. The track selection screen shows

up. Using the K/Lbuttons, select the tracks to be

played.

¡Choose “FIRST PLAY”, and the albums and tracks

will be played from the beginning of the disc.

¡Press the TITLE button, and the top hierarchy will

be called back.

¡Albums can be played up to the 8th hierarchy.

3 Press the PLAY button.

¡Playback will start.

4 To stop playing, press the STOP button.

FIRST PLAY

+ALBUM01

+ALBUM02

+ALBUM03

+ALBUM04 1/15

VOLUME LABEL

START

PLAY

SELECT:

ENTER:

RETURN:

+ALBUM11

+ALBUM12

+ALBUM13

+ALBUM14

+ALBUM15

ALBUM01

START

PLAY

SELECT:

ENTER:

RETURN:

CHANGING THE ON-SCREEN

DISPLAY DURING MP3 DISC PLAY

The information on an MP3 disc in play can be

checked.

Press the DISPLAY button during playback.

¡The track currently being

played will be highlighted.

2 Press the DISPLAY button again.

¡The album name being displayed will be replaced by

the elapsed time of the track.

¡will be displayed when repeat play has been

selected.

T: Track repeat

Album (folder) repeat

D: Disc repeat

MP3

TRACK11

TRACK12

TRACK13

TRACK14

TRACK15

ALBUM NAME A

3 Press the DISPLAY button again, and the dis-

play screen disappears.

TRACK11

TRACK12

TRACK13

TRACK14

TRACK15

0:02:31 A

Press the MODE button in STOP mode.

¡The program screen is displayed.

MP3

–30 –EN

1L25

PLAYING AN MP3 DISC

RANDOMLY

Press the MODE button twice in STOP mode.

¡The random setting menu screen will appear.

2 Press the PLAY button.

¡Random play will begin.

MP3

RANDOMRANDOM

EXIT

: MODE

START

: PLAY

1 P

ress the SEARCH MODE button during play-

back.

¡The SEARCH menu is displayed.

¡The track currently being played or in RESUME ON

will be highlighted. In the case of RESUME OFF,

the first track of the disc will be highlighted.

¡Press the RETURN button, and the SEARCH menu

disappears.

2 Using the K/Lbuttons, select the track to

be played. Then press the PLAY button to

start playing.

Notes

¡During play, a desired track can be searched for

directly. Just enter the track number with the

Number buttons.

¡If the track number entered is not available, the “dis-

able” symbol appears and the direct search mode is

cancelled.

¡Playback cannot be started from a desired time

count.

MP3

PLAYING A DESIRED TRACK

FROM AN MP3 DISC PLAYING AN MP3 DISC IN A

PROGRAM

2 Use the ARROW buttons (L/K) to select a

track. Then press the ENTER button to save

it in a program.

¡When an album name is highlighted, press the L

button, and the next hierarchy is displayed.

¡Press the Kbutton to go back to the previous hier-

archy.

¡If the entire program cannot be displayed at once on

the screen, “L” appears to go to the next page.

3 When the program has been selected, press

the PLAY button.

¡The program will begin.

Notes

¡Press the CLEAR/C.RESET button, and the last-

programmed entry will be deleted.

¡Press the RETURN button, and the program screen

will be displayed and the program stored in memo-

ry.

¡The program setting will be cancelled when the

power is turned off or the disc tray is opened.

RANDOM: MODE

EXIT

: RETURN

START

: PLAY DELETE: CLEAR

+ALBUM01

+ALBUM02

+ALBUM03

TRACK01

TRACK02

PROGRAM-FOLDER NAME

1/11 1/1

RANDOM: MODE

EXIT

: RETURN

START

: PLAY DELETE: CLEAR

+ALBUM11

+ALBUM12

TRACK11

TRACK12

TRACK13

TRACK11

PROGRAM - ALBUM01

1/11 1/1

+ALBUM01

TRACK11

TRACK12

TRACK13

TRACK14

ALBUM NAME

1/15

START

PLAY

SELECT:

ENTER:

RETURN:

RANDOM: MODE

EXIT

: RETURN

START

: PLAY DELETE: CLEAR

+ALBUM51

+ALBUM52

TRACK51

TRACK52

TRACK63

TRACK11

TRACK52

TRACK31

TRACK22

TRACK03

PROGRAM - ALBUM05

1/11 2/3

–31 –EN

1L25

SETTINGS

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

The DVD/VCR has a function which allows you to

select the desired audio language and sound mode.

For DVDs

1 Press the AUDIO button during playback.

¡The current audio status will appear at the top.

2 Press the AUDIO button repeatedly until you

see the language of your choice.

¡The audio language mode can be changed only if the

disc is recorded with a multiple language setting.

CDDVD

Notes

¡Pressing the Audio button may not work on some

DVDs with multiple audio languages (e.g. DVDs

which allow audio language setting on the disc

menu). Operation varies between discs, so refer to

the manual accompanying the disc.

¡The current audio language and sound mode will be

displayed when you first press the AUDIO button.

¡If the desired language is not shown after pressing

the Audio button several times, the disc does not

have an audio source in that language.

¡The audio language resets to the one which was

selected in the setup mode every time the power is

turned on or discs are replaced. If that language is

not available on a disc, a language defined by the

disc will be selected.

¡The screen display will disappear after about 5

seconds.

¡If you use DIGITAL AUDIO OUT jack, the sound

mode of audio CDs can not be changed.

AUDIO 1.ENG DolbyD 5.1CH 48k/3

AUDIO 2.FRE DolbyD 5.1CH 48k/3

AUDIO 3.JPN DolbyD 5.1CH 48k/3

HELLO Bon jour

For audio CDs

Press the AUDIO button during playback.

¡Pressing the AUDIO button cycles the sound mode

through STEREO, L-CH and R-CH.

Both right and left channels

are active (stereo).

AUDIO STEREO

Only the left channel is active.

AUDIO L-CH

AUDIO R-CH Only the right channel is active.

–32 –EN

1L25

CHANGING THE CAMERA

ANGLE (Multi-Angle Pictures)

The DVD/VCR has a function which allows you to

select the desired camera angle.

Press the ANGLE button during playback.

¡If the disc contains sequences recorded from differ-

ent camera angles, the angle icon ( ) will appear

at the top-right of the screen. You can change the

camera angle when the icon appears on the screen.

¡The camera angle cannot be changed if the disc does

not contain sequences recorded from different

camera angles.

Press the ANGLE button while the angle

number is shown on the screen.

Notes

¡The screen display will disappear after about 5

seconds.

¡The current camera angle will be displayed when

you first press the ANGLE button.

DVD

Angle 1

Angle 2

Angle 8

ANGLE 1 / 8

ANGLE 2 / 8

ANGLE 8 / 8

The DVD/VCR has a function which allows you to

select the desired language for subtitles.

1 Press the SUBTITLE button during playback,

and then press the SUBTITLE button to select the

desired subtitle language.

¡The subtitle language can be changed if the subtitles

are recorded in multiple languages on the DVD

being played.

¡The subtitle language cannot be changed if the

subtitles are recorded in a single language on the

DVD being played.

¡Pressing the SUBTITLE button cycles the subtitle

language from SUBTITLE 1, SUBTITLE 2 and all

the languages recorded.

¡The current subtitle mode will be displayed when

you first press the SUBTITLE button.

¡Press the SUBTITLE button, and then press the cur-

sor (s/B) button to set it to on or off.

DVD

Subtitle 1

Subtitle 2

OFF

SUBTITLE 1.ENG/6

SUBTITLE 2.FRE/6

SUBTITLE OFF

HELLO Bon jour

CHANGING THE SUBTITLE

LANGUAGE

¡It may take time to display the subtitles in the

selected language.

¡The screen display will disappear after about 5

seconds.

¡When “SUBTITLE NOT AVAILABLE” appears on

screen, it means that no subtitle has been recorded.

Notes

¡Some discs allow subtitle language setting on the

disc menu. (Operation varies between discs, so refer

to the manual accompanying the disc.)

¡If the desired language is not shown after pressing

the SUBTITLE button several times, the disc does

not have subtitles in that language.

¡The subtitle language resets to the one which was

selected in the setup mode, every time the power is

turned on or discs are replaced. If that

language is not available on a disc, a language

defined by the disc is selected.

–33 –EN

1L25

CHANGING THE ON-SCREEN

DISPLAY

TT 1/2 0:00:00 -1:23:45

TT(Title):

Current title number

/ the total number of

titles.

TIME:

Elapsed time of the

current title and remaining

time of the current title.

You can check the information regarding the disc by

pressing the DISPLAY button on the remote control.

For DVDs

Press the DISPLAY button during playback.

CDDVD

Press the DISPLAY button again.

¡Use the Number button to start from the desired

chapter.

3 Press the

DISPLAY

button again.

4 Press the

DISPLAY

button

or the RETURN but-

ton to exit the display.

CH 7/49 0:01:46 -0:03:27

CH (Chapter):

Current chapter number

/ the total number of

chapters.

TIME:

Elapsed time of the

current chapter and

remaining time of the

current chapter.

BIT RATE

BIT RATE indicator will appear.

BIT RATE shows the quantity of

information which is recorded on the DVD.

CL0

Layer number (*)

L0: Layer 0 is playing

L1: Layer 1 is playing

Current Repeat setting

C: Chapter repeat

T: Title repeat

A B: A-B repeat

* appears when a layered disc is playing.

For audio CDs

Press the DISPLAY button during playback.

TR 4/12 0:03:21 -0:02:15 B

TR (Track):

Current track number

/ the total number of

tracks.

TIME:

Elapsed time of the

current track and

remaining time of

the current track.

Press the DISPLAY button again.

ALL 4/12 0:13:45 -0:45:40 B

ALL:

Current track number

/ the total number of

tracks.

TIME:

Elapsed time of the

current disk and

remaining time of

the current disc.

3 Press the

DISPLAY

button

or the RETURN but-

ton to exit the display.

You can select the BLACK LEVEL ON to make the

black areas of the picture brighter.

Press the MODE button during playback.

¡The setup screen is displayed.

Press the ENTER button to turn it on or off.

¡ON: This makes the dark parts brighter. (Default:

ON)

OFF: The original picture which is recorded on the

disc will be shown.

¡Press the RETURN button to exit the display.

BLACK LEVEL SETTINGS

BLACK LEVEL : ON

You can enjoy stereophonic sound system when you

playback Dolby Digital and PCM 48 kHz sound.

Press the MODE button twice during playback.

¡The setup screen will appear.

Press the ENTER button to set it on or off.

ON: TruSurround ON.(Default : OFF)

OFF: TruSurround OFF.

¡Press the DISPLAY button ( you may have to press

it more than once), or press the RETURN button to

exit the display.

¡SRS TruSurround is available only when the

DVD/VCR is connected to a TV or a stereo using the

red and white AUDIO OUT jacks on the DVD/VCR.

TruSurround SETTINGS

SRS TruSurround ON

¡Use the Number buttons to start from a desired track.

DVD

–34 –EN

1L25

Press the SETUP button

in STOP mode

¡The setup screen is displayed.

2 Press the K/Lbuttons to select Language,

and then press the ENTER button.

3 Press the K/Lbuttons to select an item, and

then press the ENTER button.

AUDIO:

(Voice is played in selected language.)

SUBTITLE:

(Subtitles are shown in selected language.)

DISC MENU:

(The disc menu appears in selected language.)

DVD

PLAYER MENU:

(The on-screen display appears in selected language.)

Press the

K/L

buttons to select a desired

item, and then press the ENTER button.

¡If “OTHER” is selected on the AUDIO, SUBTITLE

or DISC MENU setting screen, the Language Code

setting screen will appear. Press the Number buttons

to enter the desired language code while referring to

the list on page 38.

5 Press the SETUP button.

¡The setup mode will be canceled and the ordinary

screen is displayed.

Notes

¡Language Setting for Audio and Subtitle is not avail-

able with some discs, so use the Audio and the

Subtitle button. Details are on pages 31 and 32.

¡You can also select an item by entering the number

besides it using the Number buttons.

¡When you change the setup items, press the STOP

button if you are in playback mode.

¡While the setup menu is shown, you can not open or

close the tray.

CHANGING THE SETUP ITEMS

LANGUAGE SETTINGS

LANGUAGE

DISPLAY

AUDIO

PARENTAL

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

Please enter a 4-digit Language code.

- - - -

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

LANGUAGE CONTROLS

DISC MENU

LANGUAGE CODE

LANGUAGE

DISPLAY

AUDIO

PARENTAL

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

AUDIO ORIGINAL

SUBTITLE OFF

DISC MENU ORIGNAL

PLAYER MENU ENGLISH

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

LANGUAGE CONTROLS

AUDIO ORIGINAL

SUBTITLE OFF

DISC MENU ORIGNAL

PLAYER MENU ENGLISH

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

LANGUAGE CONTROLS

AUDIO ORIGINAL

SUBTITLE OFF

DISC MENU ORIGINAL

PLAYER MENU ENGLISH

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

LANGUAGE CONTROLS

AUDIO ORIGINAL

SUBTITLE OFF

DISC MENU ORIGNAL

PLAYER MENU ENGLISH

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

LANGUAGE CONTROLS

ANGLE ICON (Default: ON)

Display or not display the Angle icon on the screen.

AUTO POWER OFF (Default: ON)

Set or not set to turn off after the screen saver is started and

no keys are pressed for 35 minutes.

BACKGROUND COLOR (Default: BLUE)

Select blue or gray.

Press the

K/L

buttons to select a desired

item, and then press the ENTER button to

change the setting.

5 Press the SETUP button.

¡The setup mode will be canceled and the ordinary

screen will appear.

Notes

¡You can also select an item by entering the number

besides it using the Number buttons.

–35 –EN

1L25

Press the SETUP button in STOP mode.

¡The setup screen will appear.

2 Press the K/Lbuttons to select DISPLAY

and then press the ENTER button.

3 Press the K/Lbuttons to select an item, and

then press the ENTER button.

TV ASPECT (Default: 4:3 LETTER BOX)

4:3 LETTER BOX: Wide screen with black bars on top and

bottom

4:3 PAN & SCAN: Full height picture, trimmed both sides

16:9 WIDE: If wide screen TV is connected

PANEL DISPLAY (Default : BRIGHT)

Adjust the brightness of the display of the unit.

Auto: Stays dim only during playback.

DVD

DISPLAY SETTINGS

LANGUAGE

DISPLAY

AUDIO

PARENTAL

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

LANGUAGE

DISPLAY

AUDIO

PARENTAL

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

TV ASPECT 4:3 LETTER BOX

PANEL DISPLAY BRIGHT

ANGLE ICON ON

AUTO POWER OFF ON

BACKGROUND BLUE

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DISPLAY CONTROLS

TV ASPECT 4:3 LETTER BOX

PANEL DISPLAY BRIGHT

ANGLE ICON ON

AUTO POWER OFF ON

BACKGROUND BLUE

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DISPLAY CONTROLS

1.BRIGHT

2.DIMMER

3.AUTO

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DISPLAY CONTROLS

PANEL DISPLAY

TV ASPECT 4:3 LETTER BOX

PANEL DISPLAY BRIGHT

ANGLE ICON ON

AUTO POWER OFF ON

BACKGROUND BLUE

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DISPLAY CONTROLS

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DISPLAY CONTROLS

TV ASPECT 4:3 LETTERBOX

PANEL DISPLAY BRIGHT

ANGLE ICON ON

AUTO POWER OFF ON

BACKGROUND BLUE

1.4:3 LETTER BOX

2.4:3 PAN & SCAN

3.16:9 WIDE

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DISPLAY CONTROLS

TV ASPECT

TV ASPECT 4:3 LETTER BOX

PANEL DISPLAY BRIGHT

ANGLE ICON ON

AUTO POWER OFF ON

BACKGROUND BLUE

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DISPLAY CONTROLS

Press the SETUP button in STOP mode.

¡The setup screen will appear.

2 Press the K/Lbuttons to select Audio and

then press the ENTER button.

3 Press the K/Lbuttons to select an item, and

then press the ENTER button.

DRC (Default: OFF)

On: DRC

(Dynamic Range Control)

¡This function is for controlling the range of sound

volume. By compressing the range of sound volume,

it is possible not only to suppress the output of loud

sound at night and but also to raise the volume of

low sound.

¡This function is effective only for the sound record-

ed by Dolby Digital recording.

Dolby Digital (default: ON)

On : Output by Dolby Digital

Set to On when the unit is connected to a Dolby

Digital Decoder.

DVD

–36 –EN

1L25

DTS (Default: OFF)

On : Output DTS sound

Set to On when the unit is connected to DTS

Decoder.

Down Sampling (Default: AUTO)

Set the output for the DVD

recorded in PCM 96 kHz (96 kHz or 48 kHz)

¡Press the K/L buttons to select an item, and then

press the ENTER button.

When playing a disc with copyright protection

¡If you select 96 kHz, copyright protection will be

activated and no sound will come out. If you select

AUTO, sound will be down sampled at 48 kHz.

Press the SETUP button.

¡The setup mode will be canceled and the ordinary

screen will appear.

AUDIO SETTINGS

LANGUAGE

DISPLAY

AUDIO

PARENTAL

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

LANGUAGE

DISPLAY

AUDIO

PARENTAL

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DRC OFF

DOLBY DIGITAL ON

DTS OFF

DOWN SAMPLING AUTO

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

AUDIO CONTROLS

DRC OFF

DOLBY DIGITAL ON

DTS OFF

DOWN SAMPLING AUTO

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

AUDIO CONTROLS

SETUP MENU

AUDIO OPTIONS

1.DRC

OFF

DOLBY DIGITAL ON

DTS OFF

DOWN SAMPLING AUTO

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

DRC OFF

DOLBY DIGITAL ON

DTS OFF

DOWN SAMPLING AUTO

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

AUDIO CONTROLS

SET-UP

AUDIO CONTROLS

DOWN SAMPLING

AUTO

48kHz

96kHz

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

When Parental Level is selected

¡Press the K/Lbuttons to select an

item from “ALL” or 8 to 1 and

then press the ENTER button.

Press the SETUP button.

¡The setup mode will be canceled and the ordinary

screen will appear.

–37 –EN

1L25

CONTROL LEVELS

ALL

All parental lock is cancelled.

Level 8

DVD software of any grade (adult/general/children)

can be played back.

Levels 7 to 2

Only DVD software intended for general use and

children can be played back.

Level 1

Only DVD software intended for children can be

played back, with those intended for adult and

general use prohibited.

Notes

¡With some DVDs, it may be difficult to find if they

are compatible with parental lock. Be sure to check

if the parental lock function operates in the way that

you have set.

¡Record the password in case you forget it.

IF YOU FORGET THE PASSWORD

1) Press 4, 7, 3, and 7 at Step 3.

¡Password will be cleared and parental level will be

set to ALL.

2) Proceed the above Steps 3-5 again.

Press the SETUP button in STOP mode.

¡The setup screen will appear.

2 Press the K/Lbuttons to select PARENTAL,

and then press the ENTER button.

3 Press the Number buttons to enter a 4-digit

password (you can use any 4-digits except

for 4737), and then press the ENTER button.

¡This number will be used as the password from the

second time onward.

¡By entering the password, you can then change the

control level and password settings.

¡If you want to change the password, select

“CHANGE” and enter a new password. Then press

the ENTER button.

Press the

K/L

buttons to select an item, and

then press the ENTER button.

DVD

PARENTAL LOCK

LANGUAGE

DISPLAY

AUDIO

PARENTAL

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

Please enter a 4-digit password.

- - - -

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

PARENTAL CONTROLS

PASSWORD

PARENTAL LEVEL ALL

CHANGE

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

PARENTAL CONTROLS

ALL

[NC-17]

[R]

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

PARENTAL CONTROLS

PARENTAL LEVEL

LANGUAGE

DISPLAY

AUDIO

PARENTAL

SET-UP

EXIT

: SETUP

CANCEL

: RETURN

SELECT:

/ SET

: ENTER

–38 –EN

1L25

LANGUAGE CODE LIST

No. Language Country code

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali; Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish [DAN]

German [GER]

Bhutani

Greek [GRE]

English [ENG]

Esperanto

Spanish [SPA]

Estonian

Basque

Persian

Finnish [FIN]

Fiji

Faroese

French [FRE]

Frisian

Irish [IRI]

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian [HUN]

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic [ICE]

Italian [ITA]

Hebrew

Japanese

Yiddish

Japanese [JPN]

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean [KOR]

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laothian

Lithuanian

4747

4748

4752

4759

4764

4765

4771

4772

4847

4851

4853

4854

4855

4860

4861

4864

4947

4961

4965

4971

5047

5051

5072

5158

5160

5161

5165

5166

5167

5247

5255

5256

5261

5264

5271

5347

5350

5358

5360

5367

5447

5455

5464

5467

5471

5547

5551

5557

5560

5565

5566

5569

5647

5655

5669

5747

5757

5758

5759

5760

5761

5765

5767

5771

5847

5860

5861

5866

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

No. Language Country code

Latvian; Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch [DUT]

Norwegian [NOR]

Occitan

(Afan) Oromo

Oriya

Panjabi

Polish

Pashto; Pushto

Portuguese [POR]

Quechua

Rhaeto-Romance

Kirundi

Romanian [RUM]

Russian [RUS]

Kinyarwanda

Sanskrit

Sindhi

Sangho

Serbo-Croatian

Singhalese

Slovak

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswat

Sesotho

Sundanese

Swedish [SWE]

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish [TUR]

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Chinese [CHI]

Zulu

5868

5953

5955

5957

5958

5960

5961

5964

5965

5966

5971

6047

6051

6058

6061

6149

6159

6164

6247

6258

6265

6266

6367

6459

6460

6461

6467

6469

6547

6550

6553

6554

6555

6557

6558

6559

6560

6561

6563

6564

6565

6566

6567

6568

6569

6647

6651

6653

6654

6655

6657

6658

6660

6661

6664

6665

6666

6669

6757

6764

6772

6855

6861

6961

7054

7161

7254

7267

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change

the Audio or Subtitle language setting on pages 31 and 32. If you choose any other languages, ‘---’will be dis-

played instead. (3 letter language codes are written in square brackets.)

–39 –EN

1L25

TROUBLESHOOTING GUIDE

If the DVD/VCR does not perform properly when operated as instructed in this Owner's Manual, check the

player consulting the following checklist.

PROBLEM CORRECTIVE ACTION

No power. • Make sure the power plug is connected to an AC outlet.

• Make sure the power is turned on.

The player does not respond to. •Check if the power plug is connected to an AC outlet.

the remote control. •Check the batteries in the remote control.

.• Aim the remote control directly at the remote sensor. If necessary, remove all the

obstacles between the sensor and the remote.

• You have to be within 7 m of the player.

• Check if the correct mode is selected. If not switch the mode by pressing the DVD or

the VCR button, whichever you need, on the remote control.

Timer recording is impossible. •Make sure the timer recording is set correctly.

• Make sure the power is off.

• Make sure the DVD/VCR clock is set correctly.

Cannot go into Record mode. •Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.

•Put he player in VCR mode. Press the VCR button on the remote control so that the green

VCR OUTPUT light is lit.

Playback picture is partially noisy

.•

Adjust tracking control for a better picture by pressing the CHANNEL button on the

DVD/VCR.

Cannot view a tape but the • Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.

audio is OK.• Make sure the DVD/VCR is not in the Menu mode.

No, or poor, playback picture. •Select channel 3 or 4 on your TV, then press the VCR/TV button so that the VCR/TV

indicator on the VCR comes on.

• Fine tune your TV.

TV programs cannot be seen • Re-check the ANT. IN and ANT. OUT connections. See page 14.

normally. • Press the VCR/TV button so that the VCR/TV indicator on the DVD/VCR disappears.

• Press the VCR button on the remote control to put it in the VCR mode. Check if the green

VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.

The VCR/TV light goes off.

Video or color fades in and out •

You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

when making a copy of a video tape.

Cannot remove the tape. •Check if the player is in the VCR mode. If not, press the VCR button on the remote control

to switch the mode.

No picture. •Connect the video cables firmly.

•Insert a correct video disc that plays on this player.

• Press the DVD button on the remote control. Check if the DVD OUTPUT Light is lit. Then

try other DVD feature buttons.

Disc cannot be played.•Insert the disc.

•Clean the disc.

• Place the disc correctly, with the label side up.

• Cancel the parental lock or change the control level.

No sound.•Connect the audio cables firmly.

•Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

Distorted picture.•Connect the player directly to the TV.

•

There are some cases where pictures may be slightly distorted, which are not a sign of a mal-

function.

• Although pictures may stop for a moment, this is not a malfunction.

Audio or subtitle language •

The selected language is not available for audio or subtitles on the DVD.

does not match the set up

This is not a malfunction

( )

The camera angle cannot be

changed. •The DVD does not contain sequences recorded from different camera angles.

This is not a malfunction.

Audio or subtitle language

cannot be changed. •The DVD does not contain audio source or subtitles in the selected language.

This is not a malfunction.

“Prohibited icon”appears on the

screen, prohibiting an operation.

•That operation is prohibited by the player or the disc.

This is not a malfunction.

Notes

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this

Owner’s Manual for details on correct operations.

¡Playback from a desired track and random playback are not available during program playback.

–40 –EN

1L25

HANDLING PRECAUTIONS

SERVICING

Should your DVD/VCR become inoperative, do not try

to correct the problem by yourself. There are no user-

serviceable parts inside. Turn off, unplug the power

cord, and please call our help line at 1-800-968-3429 to

locate an Authorized Service Center.

CABINET CLEANING

¡Wipe the front panel and other exterior surfaces of

the DVD/VCR with a soft cloth immersed in

lukewarm water and wrung dry.

¡Never use a solvent or alcohol. Do not spray

insecticide liquid near the DVD/VCR. Such

chemicals may cause damage and discoloration to

the exposed surfaces.

AUTO HEAD CLEANING

• Automatically cleans video heads as you insert or remove a

cassette, so you can see a clear picture.

• Playback picture may become blurred or interrupted while

the TV program reception is clear. Dirt accumulated on the

video heads after long periods of use, or the usage of

rental or worn tapes can cause this problem. If a streaky or

snowy picture appears during playback, the video heads in

your DVD/VCR may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a

good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem,

please call our help line at 1-800-968-3429 to locate an

Authorized Service Center.

NOTES:

• Remember to read the instructions included with the video

head cleaner before use.

• Clean video heads only when problems occur.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

¡If the player still does not perform properly when it is operated while referring to the relevant sections and to the

TROUBLESHOOTING GUIDE in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your

dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

¡Use discs which have the following logos on them.

(Optical audio digital discs.)

¡Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

¡Always store the disc in its protective case when it is

not used.

¡To clean-off, use a soft cloth.

¡Do not use a hard cloth since this will mar the disc.

¡Wipe the disc in a straight line from center to edge.

¡Never wipe with a circular motion.

¡Do not use detergent or abrasive cleaning agents.

DISC HANDLING

–41 –EN

1L25

SPECIFICATIONS

Product type: DVD player with Video Cassette Recorder

Discs: DVD video

Audio CD

Video Cassette tape

Converter output: VHF Channel 3 or 4.

Power source: 120 V AC +/- 10%, 60 Hz +/- 0.5%

Power consumption: 25 W (standby: 7.2 W)

Operating temperature: 5°C to 40°C

Dimensions: W 17-1/8” (435 mm)

H 4” (99 mm)

D 10-1/2” (266 mm)

Weight: 8.8 lbs (4 kg)

¡Designs and specifications are subject to change without notice.

¡If there is a discrepancy between languages, the default language will be English.

–42 –SP

1L25

CONTROLES DEL FUNCIONAMIENTO Y SUS FUNCIONES

OPEN/CLOSE

STOP SKIP/REV PLAY FWD/SKIP

DVD OPERATION VCR OPERATION

STOP/EJECT

REW PLAY F.FWD REC/OTR

OUTPUT

POWER

VIDEO

AUDIO

TIMER

SET

VCR/TV

CST.IN

CHANNEL

1 2 3 64 87 9

1113

PANEL DELANTERO

PANEL REMOTO

123

456

789

010

SPEED AUDIO

POWER

SKIP/CH.

SLOW

VCR/TV

+100

DISPLAY PAUSE

PLAY

STOP

RECORD

ENTER

RETURNTITLE

SETUP

CLEAR/

C.RESET

ZOOMMODE

ANGLE

MODE

REPEAT

SUBTITLE

DVD VCR

35 36

41 40

43 44

1. Bandeja de carga del disco

2. Luz DVD OUTPUT (verde)

Esta luz aparece cuando el DVD/VCR está en modo DVD.

Usted sólo puede mirar DVDs cuando la Luz DVD OUT-

PUT verde está encendida. Para hacer que la Luz DVD

OUTPUT verde se encienda, presione el Botón DVD en el

control remote o el Botón OUTPUT en el panel delantero.

3. Luz VCR OUTPUT (Verde)

Esta luz aparece cuando el DVD/VCR está en el modo

VCR. Usted puede sólo mirar cintas cuando la Luz VCR

OUTPUT verde está encendida. Para hacer que la Luz VCR

OUTPUT verde se encienda, presione el Botón VCR en el

control remote o el Botón OUTPUT en el panel delantero.

4. CASSETTE COMPARTMENT

5. Luz REC/OTR

Se enciende durante la grabación.

6. Luz TIMER SET

Esta luz brilla cuando el DVD/VCR está en el modo espera

o apagada para una grabación con temporizador o durante

una grabación de Un-Toque, Parpadea si se presiona Botón

TIMER SET para una grabación con temporizador, pero no

hay cinta en el DVD/VCR. Parpadea cuando todas las

grabaciones con temporizador o grabaciones de Un-Toque

han terminado.

7. Botón POWER

Presione para conectar y desconectar la alimentación.

8. Luz POWER

Se enciende cuando la alimentación está conectada.

9. Toma VIDEO IN

Conecte aquí un cable de videó procedente de la toma de

salida de videó de un camcorder, otro VCR o una fuente de

videó (reproductor de discos láser, camcorder, etc.).

10. Tomas AUDIO IN

Conecte aquí cables de audio procedentes de las tomas de sali-

da de audio de un camcorder, otro VCR o una fuente de audio.

11. Botón TIMER SET

Presione para poner el DVD/VCR en modo de espera para

una grabación con temporizador.

12. Luz CASSETTE IN

Se enciende cuando un cassette está en el DVD/VCR.

13. Luz VCR/TV

Se enciende cuando el DVD/VCR está en la posición VCR,

y se apaga cuando está en la posición TV.

14. Botones CHANNEL

En el modo VCR, presione para cambiar canales TV en el

DVD/VCR; presione para ajustar el seguimiento durante

reproducción de movimiento normal o lento; presione para

remover fluctuaciones verticales en una imagen fija.

15. Botón REC/OTR (VCR)

Presiones una vez para iniciar una grabación. Presione

repetidamente para iniciar un grabación de Un-Toque.

16. Botón F.FWD (VCR)

resione para avanzar rápidamente la cinta o ver la

imagen rápidamente en avance durante reproduc-

ción. (Búsqueda en Avance). Cuando ajuste progra-

ma. (Por ejemplo: ajuste reloj o programa con tem-

porizador), presione para determinar su selección y

proceder al siguiente paso que usted desea entrar.

Presione para determinar los modos de ajuste del

menú en pantalla. Presione para añadir o cancelar

números de canal durante preajuste de canal.

17. Botón PLAY (VCR)

resione para comenzar reproducción. Presione para

entrar dígitos cuando ajuste programa. (Por ejemplo:

ajuste reloj o programa con temporizador). Presione

para seleccionar los modos de ajuste del menú en

pantalla.

18. Botón REW (VCR)

resione para rebobinar la cinta o para ver la imagen

rápidamente en inversión durante el modo de repro-

ducción.(Búsqueda en Rebobinado). Presione para

cancelar un ajuste de programa con temporizador.

Presione para corregir dígitos cuando ajuste progra-

ma. (Por ejemplo: ajuste de reloj o programa con

temporizador). Presione para añadir o cancelar

números de canal durante preajuste de canal.

19. Botón STOP/EJECT (VCR)

●Botón de expulsión

Púlselo para sacar el videocasete de la

videograbadora.

●

Botón Stop

Presione detener el movimiento de la cinta.

–43 –SP

1L25

Presione para entrar dígitos cuando ajuste progra-

ma. (Por ejemplo: ajuste reloj o programa con tem-

porizador). Presione para seleccionar los modos de

ajuste del menú en pantalla.

20. Botón OUTPUT

Presione para seleccionar el modo DVD o el modo VCR.

● Usted puede cambiar el modo de salida ya presionando

el Botón OUTPUT en el panel delantero o ya presionan-

do el Botón DVD o VCR en el control remote. Sin

embargo, si usted presiona el Botón OUTPUT en el

panel delantero primero, usted necesita volver a

seleccionar el modo correspondiente presionando el

Botón DVD o el Botón VCR en el control remote.

21. Botón FWD/SKIP (DVD)

Reproduce desde el inicio del siguiente capítulo o pista.

Retenga abajo para avanzar rápidamente la reproducción.

22. Botón PLAY (DVD)

Comienza la reproducción del contenido del disco.

23. Botón SKIP/REV (DVD)

Reproduce desde el inicio del capítulo o pista actual.

Retenga abajo para reproducción inversa rápida.

24. Botón STOP (DVD)

Detiene la operación del disco.

25. Botón OPEN/CLOSE

Presione para insertar discos en o removerlos de la bandeja

de disco.

26. Ventanilla de Sensor Remoto, Visualización

27. Botón SPEED

Presiona para seleccionar la velocidad de grabación de

VCR (SP o SLP)

28. Botón POWER

Presione para conectar y desconectar la alimentación.

29. Botones numéricos

●Modo DVD

Presione para seleccionar directamente una Pista (CD de

Audio) para reproducción.

Presione para programar Pistas (Dcde Audio) para repro-

ducir.

●Modo VCR

Presione para seleccionar canales de TV en el DVD/VCR.

Para seleccionar canales, entre números de canal como un

número de dos dígitos para los resultados más rápidos.

Por ejemplo, para seleccionar canal 6, presione 0.6.

Botón +100:

Si usted desea seleccionar canales 100 y arriba, presione

este Botón primero, luego presione los dos dígitos últi-

mos. Por ejemplo, para seleccionar canal 125, presione

Botón “+100” primero, luego presione “2” y “5”.

30. Botón DISPLAY

●Modo DVD

Presione para tener acceso o remover la pantalla de visu-

alización durante reproducción DVD o CD de audio.

●Modo VCR

Presione para tener acceso o remover visualización de

estado en pantalla de VCR.

31. Botón DVD

Presione antes de utilizar el control remote para funciones

DVD.

32. Botón h

●Modo DVD

Presione para ver la imagen DVD en movimiento de

inversión rápida o para invertir la reproducción de un

DC de Audio.

●Modo VCR

Presione para rebobinar la cinta o para ver la ima-

gen rápidamente en inversión durante el modo de

reproducción.(Búsqueda en Rebobinado). Presione

para cancelar un ajuste de programa con tempo-

rizador. Presione para corregir dígitos cuando

ajuste programa. (Por ejemplo: ajuste de reloj o

programa con temporizador). Presione para añadir

o cancelar números de canal durante preajuste de

canal.

33. Botón Stop

Presione detener el movimiento de la cinta.

Presione para entrar dígitos cuando ajuste progra-

ma. (Por ejemplo: ajuste reloj o programa con tem-

porizador). Presione para seleccionar los modos de

ajuste del menú en pantalla.

34. Botón RECORD

Presione para iniciar una grabación. O, presione repetida-

mente para iniciar una grabación de Un-Toque.

35. Botón MENU

●Modo DVD

Presione para visualizar el menú del Disco.

●Modo VCR

Presione para tener acceso al menú VCR.

36. Botón TITLE

37. Botón SETUP

Presione para entrar el modo de preparación.

38. Botón ZOOM

Amplía parte de una imagen reproducida-DVD.

39. Botón MODE

Activa modo de reproducción de programa o reproducción

aleatoria cuando se reproducen CDs o MP3. Ajusta Nivel

de negro o TruSurround SRS.

40. Botón SUBTITLE

Presione para seleccionar un idioma de subtítulo deseado.

41. Botón ANGLE

Presione para cambiar el ángulo de cámara para ver la

secuencia que se está reproduciendo desde un ángulo difer-

ente.

42. Botón REPEAT

Repite la reproducción del disco, título, capítulo o pista

actual.

43. Botón A-B REPEAT

Repite la reproducción de una sección seleccionada.

44. Botón SEARCH MODE

●Modo DVD

Presione para tener acceso o remover la indicación de

búsqueda, que le permite ir directamente a un

Título/Capítulo/Pista/Tiempo especificado.

●Modo VCR

Presione para avanzar o rebobinar rápidamente la cinta a

una longitud específica de tiempo.

45. Botón CLEAR/C.RESET

●Modo DVD

Presione para reponen el ajuste.

●Modo VCR

Presione para reponer el contador. Presione para salir de

la pantalla MEMU.

46. Botón RETURN

Vuelve a la operación previa.

47. Botones de flecha

Utilice cuando haga ajustes mientras mira la indicación en

una pantalla de TV.

48. Botón ENTER

Presione para aceptar un ajuste.

49. Botóng

●Modo DVD

Presione para avanzar rápidamente el Disco. Presione el

Botón PAUSE, luego presione el Botón FWD iniciar a

reproducción en movimiento lento. Presione el Botón

FWD repetidamente para cambiar la velocidad de

avance del movimiento lento.

●Modo VCR

resione para avanzar rápidamente la cinta o ver la

imagen rápidamente en avance durante reproduc-

ción. (Búsqueda en Avance). Cuando ajuste pro-

grama. (Por ejemplo: ajuste reloj o programa con

–44 –SP

1L25

temporizador), presione para determinar su selec-

ción y proceder al siguiente paso que usted desea

entrar. Presione para determinar los modos de

ajuste del menú en pantalla. Presione para añadir o

cancelar números de canal durante preajuste de

canal.

50. Botón PLAY

Presione para comenzar reproducción. Presione para

entrar dígitos cuando ajuste programa. (Por ejemplo:

ajuste reloj o programa con temporizador). Presione

para seleccionar los modos de ajuste del menú en

pantalla.

51. Botón VCR

Presione antes de utilizar el control remote para fun-

ciones de VCR.

52. Botón PAUSE

●Modo DVD

Presione para pausar la reproducción de Disco. Presione

repetidamente para avanzar la imagen DVD paso a paso

(o un fotograma cada vez).

●Modo VCR

Mientras graba, presione para detener provisionalmente

la grabación (pausa). Presione por segunda vez para

reanudar la grabación normal. Usted no puede pausar

Grabación de Un-Toque. O, presione durante la repro-

ducción de cinta para congelar la imagen.

53. Botón SLOW

Durante la reproducción de cinta, presione mirar la cinta de

videó a movimiento lento. Presione de nuevo para reanudar

la reproducción normal. Este Botón no afecta la reproduc-

ción DVD.

54. Botón VDR/TV

Utilice para seleccionar la posición VCR o TV. Si la Luz

VCR/TV aparece en la parte delantera del DVD/VCR, está

en la posición VCR (en cualquier modo VCR o DVD). Si

la Luz VCR/TV no aparece en la parte delantera del

DVD/VCR, está en la posición TV.

●Posición VCR

Cuando la Luz VCR OUTPUT verde aparece en la parte

delantera del DVD/VCR, utilice la VCR para mirar una cinta,

para mirar un programa de TV mientras lo graba o para mirar

una radiodifusión de TV utilizando los botones CHANNEL o

Numéricos para cambiar canales en la DVD/VCR.

Cuando la Luz DVD/VCR aparece en la parte delantera de la

DVD/VCR, utilice el DVD/VCR para mirar la reproducción

de Disco o menús.

●Posición de TV

Utilice para mirar TV (cambiando canales en el TV) o

para mirar un programa mientras graba otro.

55. Botones SKIP/CH

●Modo DVD

Presione para saltar Capítulos o Pistas.

●Modo VCR

Presione para cambiar canales de TV en la DVD/VCR.

ANT - IN

DVD/VCR

OUT

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COAXIAL

S-VIDEO

OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

CbR

AUDO

VIDEO

CH3 CH4

ANT - OUT

6766 65 64 63 62 61

5857 59 60

56. Botón AUDIO

Presione para seleccionar un idioma de audio deseado o

modo de sonido.

57. Cordón de Alimentación AC

Conecte a una toma de corriente AC estándar para sum-

inistrar corriente al DVD/VCR.

58. Tomas AUDIO IN

Conecte aquí los cables de audio procedentes de las

tomas de salida de audio de un camcorder, otra VCR o

una fuente de audio.

59. Tomas DVD/VCR AUDIO OUT

Conecte aquí los cables de audio provistos y a las tomas

de entrada de audio de un televisor u otro equipo de

audio.

60. Tomas COMPONENT VIDEO OUT

Conecte aquí los cables de videó componente

opcionales y a las tomas de entrada de Videó compo-

nente de un televisor.

61. Toma COAXIAL

Conecte aquí un cable de audio digital coaxial opcional

y a la toma de entrada Audio Digital Coaxial de un

descodificador o receptor de audio.

62. Toma S-VIDEO OUT

Conecte aquí un cable de S-Videó opcional y a la toma

de entrada de S-Videó de un televisor.

63. Toma DVD/VCR VIDEO OUT

Conecte aquí el cable de videó amarillo (provisto) y a la

toma de entrada de Videó de TV.

64. Toma VIDEO IN

Conecte un cable procedente de la toma de salida de

videó de un camcorder, otra VCR o una fuente de audio-

visual (reproductor de disco láser, reproductor de disco

de videó, etc.) aquí.

65. Cambio CH3/CH4

Ajuste a canal 3 ó 4 para utilizar su TV con su

DVD/VCR.

66. Toma ANTI-IN (Entrada de Antena)

Conecte su antena o cable aquí.

67. Toma ANT-OUT (Salida de Antena)

Utilice el cable coaxial RF provisto para conectar esta

toma a la Toma ANTENNA IN en su TV.

Caja de cables o Sistema de Radiodifusión Directa.

VISIÓN TRASERA

Notas

¡Para utilizar el control remote para operar el DVD/VCR y

sus funciones, presione el Botón DVD en el control remote

antes de presionar otros botones DVD. Verifique que la

Luz DVD OUTPUT verde está encendida.

¡Para utilizar el control remote para operar la VCR y sus

funciones, presione el Botón VCR en el control remote

antes de presionar otros botones VCR. Verifique que la

Luz VCR OUTPUT verde está encendida.

Notas

¡La toma S-VIDEO OUT, toma COAXIAL, toma

OPTICAL y tomas COMPONENT VIDEO OUT

son sólo útiles en el modo DVD.

–45 –SP

1L25

CAMBIO DE VCR/DVD

Como este producto se utiliza del reproductor VCR y DVD, es necesario cambiar uno del

otro.

OPEN/CLOSE

STOP SKIP/REV PLAY FWD/SKIP

DVD OPERATION VCR OPERATION

STOP/EJECT

REW PLAY F.FWD REC/OTR

OUTPUT

POWER

VIDEO

AUDIO

TIMER

SET

VCR/TV

CST.IN

CHANNEL

LAY FWD/SKIP

VD OPERATION VCR OPERATIO

STOP/EJECT

REW

OUTPUT

123

456

789

010

SPEED AUDIO

POWER

SKIP/CH.

SLOW

VCR/TV

+100

DISPLAY PAUSE

PLAY

STOP

RECORD

ENTER

RETURNTITLE

SETUP

CLEAR/

C.RESET

ZOOMMODE

ANGLE

MODE

REPEAT

SUBTITLE

DVD VCR

DVD button

VCR button

OUTPUT button

DVD OUTPUT Light

VCR OUTPUT Light

Presione el Botón VCR en el control remote.

(Verifique que la Luz VCR OUTPUT está enendida.)

CAMBIO AL MODO VCR

Notas

¡Presionando sólo el Botón OUTPUT en el panel delantero no cambia el modo del control remote. Usted siem-

pre necesita seleccionar el modo correcto en el control remote, también.

Presione el Botón DVD en el control remote.

(Verifique que la Luz DVD OUTPUT está encendida)

CAMBIO AL MODO DVD

–46 –SP

1L25

CONECTADO A UN TV QUE TIENE TOMA DE ENTRADA DE S-

VÍDEO o TOMAS DE ENTRADA DE VÍDEO COMPONENTE

CONECTANDO A UN TV

DVD/VCR A CONEXIÓN DE TV

1. Desconecte el cordón de alimentación AC del toma de

corriente AC.

2. Desconecte la antena o cable del TV.

3. Conecte la antena o cable a la toma ANT.IN del

DVD/VCR.

Conecte el DVD/VCR al TV utilizando el cable coaxial.

5. Enchufe los cordones de alimentación CA del

DVD/VCR y TV dentro de las tomas de corriente AC.

Si su TV no tiene terminales A/V:

Cuando el DVD/VCR está en modo de Reproducción

VCR o cuando el DVD/VCR está en el modo VCR. su

TV recibirá señales del DVD/VCR en cualquiera de

los canales 3 ó 4. Para utilizar el DVD/VCR con su TV,

ponga el conmutador selector en CH3 o CH4 (que está

ubicado en la parte trasera de su DVD/VCR),

cualquiera no se utilice para radiodifusiones normales

en su área. Luego, ajuste su TV al mismo canal.

AJUSTANDO EL CONMUTADOR

CH3/CH4

CONEXIONES

CONECTANDO A UN AMPLIFICADOR EQUIPADO CON TOMAS DE

ENTRADA DIGITAL, TALES COMO PLATINA MD O PLATINA DAT

Por favor, vea la [Fig. 4] en la página 15 para detalles.

Por favor, vea la [Fig.1] en la página 14 para detalles.

Por favor, vea la [Fig. 2] en la página 14 para detalles.

CONECTANDO A UN DESCODIFICADOR DIGITAL DOLBY O

DESCODIFICADOR DTS

Por favor, vea la [Fig. 5] en la página 16 para detalles.

CONECTANDO A UN AUDIO ANALÓGICO

Por favor vea la [Fig. 6] en la página 16 para detalles.

PREPARACIÓN DE CANAL AUTOMÁTICA

PREPARACIÓN

1 Conecte el TV y ponga el TV en el canal 3 ó 4.

2 Conecte el DVD/VCR presionando [POWER].

Ambas Luces POWER y VCR/TV se encen-

derán.

Seleccione el Idioma en la pantalla (“INGLÉS”,

“FRANCÉS”o “ESPAÑOL”) presionando [PLAY] o

[STOP]. Luego, presione [F.FWD].

4 Inicie canal preajustado presionando [F.FWD]

una vez. El sintonizador explora y memoriza

todos los canales activos de su área.

5 Después de explorar, el sintonizador de

detiene en el canal memorizado más bajo. La

pantalla de TV retorna al modo TV.

VCR

–47 –SP

1L25

PREPARACIÓN DE RELOJ

Ajuste el reloj con precisión para grabación con tempo-

rizador automática adecuada. Le sugerimos que usted utilice

un TV o estación de radio como su fuente de tiempos.

1 Presione [MENU] dos veces para llamar el menú

principal. (Si usted ha ajustado ya el reloj, usted

sólo tiene que presionarlo una vez).

¡Si el reloj no está ajustado, aparece primero el menú

CLOCK SET. En este caso, siga el paso [3].

2 Seleccione “CLOCK SET”presionando [PLAY]o

[STOP]. Luego, presione [F.FWD]

3 Ajuste el reloj.

¡Para retroceder un paso, presione [REW]

4 Ponga en marcha el reloj presionando

[CLEAR/C.RESET] o [F.FWD].

VCR

AJUSTE DE RELOJ

MES DIA AÑO

03 / 18 LUN 2002

HORA MINUTO AM/PM

05 : 40 PM AM

1) Ajuste el mes

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

2) Ajuste el día

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

3) Ajuste el año

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

El día de la semana aparecerá automáticamente.

4) Ajuste la hora

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

5) Ajuste el minuto

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

6) Ajuste el AM o PM

Presione [PLAY] o [STOP]

repetidamente.

REPRODUCIENDO UN DVD,

VIDEO O UN CD AUDIO

Para empezar

Conecte la alimentación del TV, amplificador y

cualquier otro componente que se encuentre conectado

al DVD/VCR. (Cambie el sistema de entrada para que

se adapte DVD/VCR y compruebe que el volumen de

sonido sea correcto).

1 Presione el Botón POWER.

¡La alimentación se conectará.

Compruebe que la Luz DVD OUTPUT está encen-

dida. Si no, presione el Botón DVD en el control

remote para cambiar el modo DVD/VCR.

2 Presione el Botón OPEN/CLOSE.

¡La bandeja de carga del disco se abrirá.

3 Ponga un disco en la bandeja.

¡Asegúrese de que el disco está asentado correcta-

mente, con el lado de la etiqueta arriba.

4 Presione el Botón PLAY.

¡La bandeja se cerrará automáticamente, y la repro-

ducción empezará luego desde el primer capítulo o

pista del disco. Usted necesita presionar el Botón

PLAY sólo cuando la bandeja se ha cerrado presion-

ando el Botón OPEN/CLOSE.

5 Presione el Botón STOP para detener la

reproducción.

CDDVD

REPRODUCCIÓN DE UN DISCO

0VMN03030

H9227UD ★★★★★

Printed in China

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or

workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this

warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail

purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to

any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not

supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,

alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this

product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE

PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE

UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI

CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or for general service procedure,

please call 1-800-968-3429 or write to the following:

FUNAI CORPORATION, INC.

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-968-3429

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Sylvania Dvc850C Users Manual

DVC850C DVC850C

DVC850C to the manual bf618956-98ca-4c4d-8ed8-efa5d3bcf9d2

Navigation menu

Versions of this User Manual:

Views

Navigation