Sylvania Ssc191 Users Manual T7205.QX33

SSC191 SSC191

SSC191 pdf_14950

SSC191 to the manual 42ddb572-f923-41a1-b495-ad2d660fb4d4

2015-02-04

: Sylvania Sylvania-Ssc191-Users-Manual-389669 sylvania-ssc191-users-manual-389669 sylvania pdf

Open the PDF directly: View PDF .
Page Count: 40

19-INCH COLOR TV/VCR

SSC191

OWNER’S

MANUAL

As an ENERGY STAR

Partner, our company has

determined that this product meets

the ENERGY STAR guidelines for

energy efficiency. ENERGY STAR is

a U.S. registered mark.

If you need additional assistance for set-up or operating

after reading owner’s manual, please call

TOLL FREE : 1-800-968-3429.

Please read before using this equipment

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

This Owner’s Manual is made of

recycled paper.

T7205.QX33 01.3.19 10:26 AM Page 1

1.Read instructions-All the safety and operating instructions

should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

should be followed.

5.Cleaning-Unplug TV/VCR from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possi-

bility of the loss of an authorization code for a CATV con-

verter, is not intended to be unplugged by the user for clean-

ing or any other purpose, may exclude the reference to

unplugging the appliance in the cleaning description other-

wise required in item 5.

6.Attachments-Do not use attachments not recommended by

the TV/VCR manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/VCR near water-

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool,

and the like.

8.Accessories-Do not place this TV/VCR on an unstable cart,

stand, tripod, bracket, or table. The TV/VCR may fall, caus-

ing serious injury to someone, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the

TV/VCR. Any mounting of the

appliance should follow the manu-

facturer’s instructions and should

use a mounting accessory recom-

mended by the manufacturer. An

appliance and cart combination

should be moved with care.Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

AMEUBLES- Cet appareil ne doit

être placé que sur un meuble (avec

ou sans roulettes) recommandé par

le fabricant. Si vous l’installez sur

un meuble à roulettes, déplacez les

deux ensembles avec précaution.

Un arrêt brusque, l’utilisation

d’une force excessive et des sur-

faces irrégulières risquent de désta-

biliser l’ensemble et de le renverser.

9. Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the TV/VCR and to protect it from overheat-

ing, and these openings must not be blocked or covered.

The openings should never be blocked by placing the

TV/VCR on a bed, sofa, rug, or other similar surface. This

TV/VCR should never be placed near or over a radiator or

heat register. This TV/VCR should not be placed in a built-

in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions

have been adhered to.

10.Power Sources-This TV/VCR should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For TV/VCRs intended to operate from battery

power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/VCR is equipped

with a polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

- 2 - EN

1B15

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

The caution marking is located on the rear of the cabinet.

IMPORTANT SAFEGUARDS

PORTABLE CART WARNING

S3126A

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

T7205.QX33 01.3.19 10:26 AM Page 2

- 3 - EN

1B15

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV/VCR, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect to

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements

for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/VCR receiver

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the TV/VCR due to lightning and

power-line surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this TV/VCR through openings as they may touch dan-

gerous voltage points or short out parts that could result in

a fire or electric shock. Never spill liquid of any kind on

the TV/VCR.

18.Servicing-Do not attempt to service this TV/VCR yourself

as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to quali-

fied service personnel.

19.Damage Requiring Service-Unplug this TV/VCR from

the wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the

TV/VCR.

c. If the TV/VCR has been exposed to rain or water.

d. If the TV/VCR does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the TV/VCR to its normal operation.

e. If the TV/VCR has been dropped or damaged in any way.

f. When the TV/VCR exhibits a distinct change in perfor-

mance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21.Safety Check-Upon completion of any service or repairs to

this TV/VCR, ask the service technician to perform routine

safety checks to determine that the TV/VCR is in proper

operating condition.

22.Heat-This TV/VCR product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

GROUND CLAMPS

NEC - NATIONAL ELECTRICAL CODE

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

S2898A

WIRE

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ELECTRODE SYSTEM

(NEC ART 250, PART H)

SERVICE

EQUIPMENT

CLAMP

ANTENNA

LEAD IN

ANTENNA

POWER SERVICE GROUNDING

GROUND

ELECTRIC

FIGURE A

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

T7205.QX33 01.3.19 10:26 AM Page 3

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be deter-

mined by turning the equipment off and on, the

user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment

and receiver.

3) Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

4) Consult the dealer or an experienced radio/TV

technician for help.

- 4 - EN

1B15

PRECAUTIONSPRECAUTIONS

LOCATION

For safe operation and satisfactory performance of

your TV/VCR, keep the following in mind when

selecting a place for its installation:

•Shield it from direct sunlight and keep it away

from sources of intense heat.

•Avoid dusty or humid places.

•Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes

at the top and bottom of the unit. Do not place the

unit on a carpet because this will block the ventila-

tion holes.

•Install unit in a horizontal position.

•Avoid locations subject to strong vibration.

•Do not place the TV/VCR near strong magnetic fields.

•Avoid moving TV/VCR to locations where temper-

ature differences are extreme.

•Do not handle the power cord with wet hands.

•Do not pull on the power cord when disconnecting

it from an AC wall outlet. Grasp it by the plug.

•If, by accident, water is spilled on your unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

•Do not put your fingers or objects into the

TV/VCR cassette holder.

•Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cold room or under conditions of

high humidity. If a tape is played in a TV/VCR

which has moisture, it may damage the tape and

TV/VCR. Therefore when the condensation occurs

inside the unit, turn the POWER button on and allow

at least 2 hours for the unit to dry out.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast televi-

sion programming, video tape, film or other copy-

righted material may violate applicable copyright

laws. We assume no responsibility for the unautho-

rized duplication, use, or other acts which infringe

upon the rights of copyright owners.

FCC WARNING- This equipment may gener-

ate or use radio frequency energy. Changes or

modifications to this equipment may cause

harmful interference unless the modifications

are expressly approved in the instruction man-

ual. The user could lose the authority to oper-

ate this equipment if an unauthorized change

or modification is made.

The serial number of this product may be found on the back of the unit. No other TV/VCR has the same serial

number as yours. You should record the number and other vital information here and retain this book as a per-

manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

T7205.QX33 01.3.19 10:26 AM Page 4

- 5 - EN

1B15

TABLE OF CONTENTS

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

CIMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

CPRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

AVOID THE HAZARDS OF ELECTRICAL

SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .4

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

CFEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

CSUPPLIED ACCESSORIES . . . . . . . . . . . . . . .6

CVIDEO CASSETTE . . . . . . . . . . . . . . . . . . . . .7

COPERATING CONTROLS AND FUNCTIONS 8

CPREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10

INSTALLING THE BATTERIES . . . . . . . . . . .11

EXTERNAL INPUT MODE . . . . . . . . . . . . . .11

CSET UP FOR USE . . . . . . . . . . . . . . . . . . . . .12

CHANNEL SET UP FOR THE FIRST TIME .12

DELETING (OR ADDING) CHANNEL . . . . .12

CHANNEL SET UP AGAIN . . . . . . . . . . . . . .13

SELECTING THE LANGUAGE . . . . . . . . . . .13

DAYLIGHT-SAVING TIME . . . . . . . . . . . . . .13

CLOCK SET UP (AUTO / MANUAL) . . . . . .14

CON SCREEN DISPLAY . . . . . . . . . . . . . . . . .16

CSPECIAL FEATURES . . . . . . . . . . . . . . . . . .16

REAL TIME TAPE COUNTER . . . . . . . . . . . .16

AUTO REWIND-EJECT . . . . . . . . . . . . . . . . .16

CTV OPERATION . . . . . . . . . . . . . . . . . . . . . . .17

WATCHING A TV PROGRAM . . . . . . . . . . . .17

GAME MODE . . . . . . . . . . . . . . . . . . . . . . . . .17

DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .17

PICTURE CONTROL . . . . . . . . . . . . . . . . . . .17

CLOSED CAPTION SYSTEM . . . . . . . . . . . .18

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .19

CMTS(Multi-Channel Television sound)SYSTEM .21

CHECKING THE SELECTED MTS MODE . .21

MTS RECORDING/MONITOR MODE . . . . .21

SELECTING THE MTS SYSTEM . . . . . . . . .22

CPLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .23

NORMAL PLAYBACK . . . . . . . . . . . . . . . . . .23

TRACKING ADJUSTMENT . . . . . . . . . . . . . .23

SLOW MOTION . . . . . . . . . . . . . . . . . . . . . . .23

PICTURE SEARCH . . . . . . . . . . . . . . . . . . . .23

STILL PICTURE . . . . . . . . . . . . . . . . . . . . . . .23

VERTICAL HOLD CONTROL . . . . . . . . . . . .23

CSPECIAL PLAYBACK . . . . . . . . . . . . . . . . . .24

RENTAL PLAYBACK . . . . . . . . . . . . . . . . . . .24

AUTO REPEAT PLAYBACK . . . . . . . . . . . . .24

CSEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

ZERO RETURN . . . . . . . . . . . . . . . . . . . . . . .25

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .25

INDEX SEARCH . . . . . . . . . . . . . . . . . . . . . . .26

CRECORDING . . . . . . . . . . . . . . . . . . . . . . . . .27

NORMAL RECORDING . . . . . . . . . . . . . . . . .27

SKIPPING UNWANTED SCENES DURING

RECORDING . . . . . . . . . . . . . . . . . . . . . . . . .27

OTR (One Touch Recording) . . . . . . . . . . . . . .28

COPYING A VIDEO CASSETTE

(Requires a VCR or camcorder) . . . . . . . . . . . .28

CTIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

AUTOMATIC TIMER RECORDING . . . . . . .29

TIMER PROGRAM EXTENSION . . . . . . . . .30

HINTS FOR AUTOMATIC TIMER

RECORDING . . . . . . . . . . . . . . . . . . . . . . . . .31

AUTO RETURN . . . . . . . . . . . . . . . . . . . . . . .31

WAKE UP TIMER . . . . . . . . . . . . . . . . . . . . . .31

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .31

CMAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .32

CTROUBLESHOOTING GUIDE . . . . . . . . . . .33

CSPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .34

CCABLE CHANNEL DESIGNATIONS . . . . . .34

CWARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

CONTROLES DE OPERACIÓN Y

SUS FUNCIONES . . . . . . . . . . . . . . . . . . . . . .35

CONEXIONES DE ANTENA/CABLE . . . . . .36

MODO DE ENTRADA EXTERNA . . . . . . . . .36

INSTALACIÓN DE LAS PILAS . . . . . . . . . . .36

PREPARACIÓN DE CANALES POR

PRIMERA VEZ . . . . . . . . . . . . . . . . . . . . . . . .37

AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . .37

INDICE

T7205.QX33 01.3.19 10:26 AM Page 5

- 6 - EN

1B15

FEATURES

•

Hi-Fi system

–The Hi-Fi stereo recording system

offers you excellent sound quality with a dynamic

range of 80dB, frequency response from 20Hz to

20kHz, and 0.005% wow and flutter.

•

Rotary 4-head Record/Playback System–Four heads

ensure excellent picture quality and special effects playback.

•Index Search–

Fast-forwards to start of next recording.

•Slow Motion–View recorded program at slower

than normal speed. Control the playback speed

slowness by pressing the F.FWD button to go

faster, or the REW button to go slower.

•Infrared remote control

•Bilingual on screen menu display selectable in

English or Spanish

•

Real time counter–This shows the elapsed recording

or playback time in hours, minutes, and seconds.

The

“–” indication will appear when the tape is rewound

further than the tape counter position “0:00:00”.

•181 channel capability PLL frequency synthesiz-

er tuner with direct station call–(A converter may

be necessary to view scrambled cable channels.)

•Auto Clock Setting–Allows you to set the clock

function from a PBS broadcast station.

•Closed caption system–You may view specially

labeled (cc) TV programs, movies, news, prere-

corded tapes, etc. with either a dialogue caption or

text display added to the program.

•Game mode–Automatically sets external input

mode and allows TV/VCR display to be suitable

for use with TV games.

•Auto power on and off system–Automatically

turns on the TV/VCR when you insert the cassette,

turns off after auto-rewind, and ejects when the

beginning of the tape is reached.

•Auto rewind when the end of a tape is

reached–This function doesn’t occur when using

timer recording.

•2 Step picture search operation–You can view a

video program at a high speed or super high speed

in either a forward or reverse direction in LP and

SLP mode. For SP mode only high speed.

•Three different playback tape speeds : SP/LP/SLP

•Two different recording tape speeds : SP/SLP

•Auto Head Cleaner–Automatically cleans video

heads as you insert or remove a cassette.

•Zero Return–The tape returns to counter of

0:00:00 by rewinding or fast forwarding.

•Still–“Freeze” the picture at any time, for close

viewing of a particular scene.

•Digital Auto Tracking (DTR)–Automatically

adjusts the tracking for each tape you play.

•Rental play mode–Improves playback picture

quality from worn tapes, such as rental tapes.

•Auto repeat–Allows you to repeat the playing of a

tape indefinitely without pressing the PLAY button.

•Time search–Let you set the TV/VCR to advance

the tape by entering the desired playback time you

want to skip.

•OTR (One Touch Recording)–Instant timed

recording from 30 to 480 minutes is possible at the

push of the REC/OTR button.

•1 Year, 8 events (including Daily and Weekly

Timer Recording)–The built-in timer allows you to

record up to 8 programs at different times on dif-

ferent channels up to 1 year in advance. The Daily

timer allows recordings to be made of daily broad-

casts, and the Weekly timer allows recording to be

made once a week up to the end of the tape.

•Auto return–After timer recording is finished, the

TV/VCR can return to the beginning of the recording.

•Wake up/Sleep timer–Allows you to have the

TV/VCR automatically turn on or off at a desired time.

•Timer Program Extension–Allow you to shift the

time schedule for automatic timer recording.

•V-CHIP–Enables parents to prevent their children

from watching inappropriate material on TV.

SUPPLIED ACCESSORIES

•

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-968-3429.

•Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators

(Splitter). Contact your local electronics store for these items.

•We do not recommend the use of universal remote controls. Not all of the functions may be controlled with

a universal remote control. If you decide to use a universal remote control with this unit, please be aware

that the code number given may not operate this unit. In this case, please call the manufacturer of the uni-

versal remote control.

Remote Control Unit 2 AA Batteries

PART NO.

(N0146UD)

T7205.QX33 01.3.19 10:26 AM Page 6

- 7 - EN

1B15

VIDEO CASSETTE

This TV/VCR will operate with any cassette that has the mark. For best results, we

recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

REMOVING A CASSETTE

1)In the Stop mode, press the EJECT button on the

remote control or press the STOP/EJECT button on

the TV/VCR. The cassette will eject.

2)Pull the cassette out of the cassette compartment.

3)Store the cassette in its case as shown.

PRECAUTIONS

•Avoid moisture. Moisture condensation may occur

on the tape if it is moved from a cold place to a

warm place or visa versa. Before using a tape with

these conditions, to avoid damage of the tape and

your TV/VCR, wait until the tape has warmed to

room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and magnetic

fields.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in

gently, but continuously, on the center-back of the

cassette until it is drawn into the TV/VCR. The

TV/VCR will automatically turn on.

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from : SP

mode (Standard Play) or SLP mode (Super Long

Play).

The table below shows the maximum recording/play-

back time using T60, T120 or T160 tapes in each

mode.

Note: You can play back a tape recorded in LP mode

(Long Play).

Tape Speed Recording/Playback Time

Type of tape

T60 T120 T160

SP mode 1 hour 2 hours 2-2/3 hours

SLP mode 3 hours 6 hours 8 hours

ERASE PREVENTION

You can prevent accidental

erasing of recording by

breaking off the tab on the

back edge of the cassette.

If you decide to record on

the tape again, cover the

hole with plastic tape.

CORRECT

Window

WRONG

Tab

Transparent Tape

T7205.QX33 01.3.19 10:26 AM Page 7

- 8 - EN

1B15

OPERATING CONTROLS AND FUNCTIONS

NOTE:

•We do not recommend the use of universal remote controls. Not all of the functions may be controlled with

a universal remote control.

If you decide to use a universal remote control with this unit, please be aware that the code number given

may not operate this unit. In this case, please call the manufacturer of the universal remote control.

- TV/VCR FRONT PANEL - [Fig.1]

1VIDEO input jack– Connect to the video output

jack of your video camera or another VCR.

2AUDIO input jacks– Connect to the audio output

jacks of your audio equipment, video camera or

another VCR.

3HEADPHONE jack– Connects to headphones (not

supplied) for personal listening. The size of jack is

1/8” monaural (3.5mm).

4STOP button– Press to stop the tape motion.

EJECT button– Press in the Stop mode to remove

tape from TV/VCR.

Lbutton–

•Press to select setting modes from the on screen

menu.

•Press to enter digits when setting program.

(for example: setting clock or timer program)

5REW button– Press to rewind the tape, or to view

the picture rapidly in reverse during playback

mode. (Rewind Search)

sbutton–

•Press to select a mode from a particular menu.

(for example: LANGUAGE or USER’S SET UP)

6PLAY button– Press to begin playback.

Kbutton–

•Press to select setting modes from the on screen

menu.

•Press to enter digits when setting program.

(for example: setting clock or timer program)

- REMOTE CONTROL - [Fig.2]

1 92 34 5 6 7 8 131011 1412

STOP/EJECT REW PLAY F.FWD REC/OTR CHANNEL VOLUME POWER

VIDEO HEADPHONE

AUDIO

POWER WAKE-UP

/SLEEP

123

456

789

+100

EJECT

CHANNEL

RETURN

REW

PLAY

STOP

F.FWD

GAME

RECORD

PAUSE/STILL

SPEED

SLOW

CHANNEL

T-PROG.

CLEAR

COUNTER

RESET

DISPLAY MUTE

VOLUME

15 11

T7205.QX33 01.3.19 10:26 AM Page 8

- 9 - EN

1B15

- REAR VIEW - [Fig.3]

ANT.

7F.FWD button– Press to rapidly advance the tape,

or to view the picture rapidly in forward during

playback mode. (Forward Search)

Bbutton–

•When setting program (for example: setting clock

or timer program), press to determine your selec-

tion and proceed to the next step you want to input.

•Press to determine setting modes from on screen

menu.

•Press to select a mode from a particular menu.

(for example: LANGUAGE or USER’S SET UP)

8REC button– Press for manual recording.

OTR button– Activates One Touch Recording.

(only on the TV/VCR)

9RECORD indicator– Flashes during recording.

Lights up in the Stand-by mode for Timer

Recording.

10 Remote Sensor Window– Receives the infrared

signals from the remote control.

11 CHANNEL K/ Lbuttons–

Press to select the

desired channels for viewing or recording, listening

of FM radio.

You may display the main menu on the TV screen

by pressing repeatedly this button on the TV/VCR.

TRACKING function– Press to minimize video

‘noise’ (lines or dots on screen) during playback

or Slow mode. (See page 23.)

VOLUME XX/ YYbuttons– Adjust the volume level.

13 POWER button– Press to turn TV/VCR on and

off. Press to activate timer recording.

14 Cassette compartment

15 Number buttons– Press to select desired channels

for viewing or recording. To select channels from

1 to 9, first press the 0 button and then 1 to 9.

+100 button– When selecting cable channels which

are higher than 99, press this button first, then press

the last two digits. (To select channel 125, first press

the “+100” button then press “2” and “5”).

16 MENU button– Press to display the main menu on

the TV screen.

17 DISPLAY button– Display the counter or the cur-

rent channel number and current time on the TV

screen. (See page 16.)

18 SPEED button– Press to choose the desired

recording speed:SP/SLP.

19 T-PROG. CLEAR button– Press to cancel a set-

ting of timer program. (See page 30.)

COUNTER RESET button– Press to reset counter

to 0:00:00.

20 GAME button– Sets the game mode and external

input mode at the same time. (See page 17.)

SLOW button– Press to start slow motion playback.

22 PAUSE/STILL button– Press to temporarily stop

the tape during the recording or to view a still pic-

ture during playback.

Frame Advance function– Press to advance the

picture one frame at a time during Still mode.

23 MUTE button– Mutes the sound. Press it again to

resume sound.

24 CHANNEL RETURN button– Press to go back to

the previously viewed channel. For example,

pressing this button once will change channel dis-

play from 3 (present channel) to 10 (previously

viewed channel), and pressing it a second time

will return from 10 to 3.

25 WAKE UP/SLEEP button– Sets the Wake up or

Sleep Timer. (See page 31.)

26 Power cord– Connect to a standard AC outlet

(120V/60Hz).

27 ANT. terminal– Connect to an antenna or cable

system.

T7205.QX33 01.3.19 10:26 AM Page 9

- 10 - EN

1B15

PREPARATION FOR USE

ANTENNA/CABLE

CONNECTIONS

VHF/UHF COMBINED ANTENNA

The VHF/UHF Rod Antenna (not supplied) is detach-

able. Insert the stem of the antenna into the hole on

the upper-back portion of the TV/VCR.Connect the

VHF/UHF Rod Antenna or VHF/UHF Combination

Antenna to the ANT. terminal of the TV/VCR as

shown in the diagram below.For the best reception,

fully extend the VHF/UHF Rod Antenna and make

the necessary adjustments. (Avoid touching the top

section when adjusting.)

NOTE:

Before plugging the Rod antenna into antenna termi-

nal, check that the pin is not bent. If it is bent,

straighten the pin as illustrated, then plug the pin into

antenna terminal. CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connects

directly to your TV/VCR without a converter box.

By using this connection you can:

1) Use the TV/VCR remote to select channels.

2) Program one or more unscrambled channels for

Automatic Timer Recording.

NOTE: This unit will ONLYrecord and view the

same channel.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor

antenna.

ANT.

Bent pin

Cable Plug

(Needs to be straightened) (Straight pin)

ANT.

NOTE:

The connection of an indoor antenna may not always

give acceptable TV reception.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connect-

ed to the grounding system of the building as close to the point of cable entry as practical.

ANT.

Antenna/Cable Connections Continued on the Next Page.

[Fig.4]

[Fig.5]

[Fig.6]

Rod Antenna

(Not supplied)

VHF/UHF Antenna

(Not supplied)

VHF/UHF

Combiner

(Not

supplied)

Flat twin-lead cable

UHF Antenna

(Not supplied)

VHF Antenna (Not supplied)

From Cable System

75-ohm Coaxial

Cable (Not

supplied)

T7205.QX33 01.3.19 10:26 AM Page 10

- 11 - EN

1B15

CABLE WITH CONVERTER/

DESCRAMBLER BOX OR SATELLITE

BOX

If your cable service supplies you with a converter

box or if you use a satellite system, you can use the

basic connection shown here.

By using this connection you can also record scram-

bled channels. However, channel selection must be

made with the converter box or satellite box. This

means that channels cannot be changed using the

TV/VCR Remote Control. Unattended timer record-

ing is limited to one channel at a time.

ANT.

OUT

ANT.

[Fig.7]

From Cable System

or Satellite Dish

75-ohm Coaxial

Cable

(Not supplied)

Satellite Box or

Cable Box (Not supplied)

TO RECORD A SCRAMBLED/UNSCRAM-

BLED CHANNEL

1. Set the TV/VCR channel selector to the output

channel of the Cable Converter Box or Satellite

Box. (Ex. CH3)

2.Select the channel to record from your Cable

Converter Box or Satellite Box.

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing

the cover on the remote unit in the direction of the

arrow.

2)Insert 2 “AA” penlight batteries into the battery

compartment in the direction indicated by the

polarity (+/-) markings.

3)Replace the cover.

EXTERNAL INPUT MODE

When using an external input signal (another VCR or

video camera), connect the player’s audio/video out-

put cables to the AUDIO L/R IN/ VIDEO IN jacks of

your TV/VCR. Then press the CHANNEL Kor L

button until “AUX” appears on the screen.

AUX

T7205.QX33 01.3.19 10:26 AM Page 11

- 12 - EN

1B15

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just

select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then

select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

Plug in the TV/VCR power cord

Plug the TV/VCR power cord into a

standard AC outlet.

NOTE:

•If some digits appear in the corner of

the screen, press the POWER button

without unplugging the power cord.

Turn on the TV/VCR

Press the POWER button to turn on the TV/VCR.

Select “ENGLISH” or “ESPAÑOL”

Select “ENGLISH” or

“ESPAÑOL”=Spanish using the

F.FWD/Bor REW/sbutton. “[ ]”

indicate the selected language.

Begin auto preset

Press the PLAY/Kor STOP/Lbut-

ton to point to “AUTO PRESET”.

Then press the F.FWD/Bbutton.

The tuner scans and memorizes all

active channels in your area.

NOTES:

•The TV/VCR distinguishes between standard TV

channels and cable channels.

•If you want to play or record a video tape

BEFORE presetting the tuner, you must press the

MENU button on the remote control. To preset the

tuner again, see “CHANNEL SET UP AGAIN” on

page 13.

•The TV/VCR may recognize TV channels to be

CATV channels by the receiving conditions. In this

case, try auto preset again in the fine receiving

conditions.

After scanning

The tuner stops on the lowest memorized channel.

If you want to recall the selected channels, you can

select the desired channel directly with the remote

control number buttons or CHANNEL Kor L.

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch

can be deleted from the memory. (Of course, you can

add the deleted channel into the memory again.)

Select “CHANNEL SET UP”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “CHANNEL SET

UP”.

Then, press the F.FWD/Bbutton.

Select “ADD/DELETE CH”

Press the PLAY/Kor STOP/Lbut-

ton to point to “ADD/DELETE

CH”.

Press the F.FWD/Bbutton.

Enter the desired channel number

Press the PLAY/Kor STOP/Lbut-

ton until your desired channel num-

ber appears. (You can also use the

number buttons or the CHANNEL

K/Lbutton to enter it) (Example:

CH8)

Delete (or add) it from (into) memory

Press the F.FWD/Bor REW/sbutton. The channel

number changes to light red. The channel is deleted

from memory.

•To delete another channel, repeat steps [3] and [4].

•If you press the F.FWD/Bor REW/sbutton

again, the channel is memorized again.

Exit the channel setup mode

Press the MENU button on the remote control to

returns to TV mode.

NOTE: To confirm that channel(s) has been deleted

or added, press the CHANNEL Kor Lbutton.

Added channel: Light blue.

Deleted channel: Light red.

– SET UP –

BLANGUAGE

[ENGLISH] ESPAÑOL

AUTO PRESET

– SET UP –

LANGUAGE

[ENGLISH] ESPAÑOL

BAUTO PRESET

–M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

BCHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– CHANNEL SET UP –

BADD / DELETE CH (TV)

AUTO PRESET

ADD / DELETE

T7205.QX33 01.3.19 10:26 AM Page 12

- 13 - EN

1B15

CHANNEL SET UP AGAIN

Make sure ...

•Press the POWER button to turn on the TV/VCR.

Select “CHANNEL SET UP”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “CHANNEL SET

UP”.

Then, press the F.FWD/Bbutton.

Begin auto preset

Press the PLAY/Kor STOP/Lbut-

ton to point to “AUTO PRESET”.

Then, press the F.FWD/Bbutton.

The tuner scans and memorizes all

the active channels in your area.

After scanning

The tuner stops on the lowest memorized channel.

SELECTING THE LANGUAGE

Make sure ...

•Press the POWER button to turn on the TV/VCR.

NOTE: This function effects only the language on

the screen menu and not the audio source.

Select “LANGUAGE”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “LANGUAGE”.

Select “ENGLISH” or “ESPAÑOL”

Select “ENGLISH” or “ESPAÑOL”= Spanish using

the F.FWD/Bor REW/sbutton.

Exit the Language mode

Press the MENU button on the remote control to

return to TV mode.

NOTE: If for some reason the menu is in Spanish,

press the MENU button on the remote control, press

the PLAY/Kbutton to point to “IDIOMA

[ESPAÑOL]”, then press the F.FWD/Bbutton, then

press the MENU button on the remote control.

DAYLIGHT-SAVING TIME

Select this feature and the TV/VCR’s clock automati-

cally will advance one hour in April, then reverse one

hour in October.

When Daylight-Saving Time is ON, the clock will

change automatically as follows:

•First Sunday of April : At 2 AM the clock imme-

diately changes to 3 AM. Any timer programming

you have set to occur between 2 AM and 3 AM

will not record.

•Last Sunday of October : At 2 AM the clock

immediately changes to 1 AM.

Make sure ...

•Press the POWER button to turn on the TV/VCR.

Select “SETTING CLOCK”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “SETTING

CLOCK”.

Then, press the F.FWD/Bbutton.

Set “D.S.T.” (Daylight-Saving Time) to [ON]

Press the PLAY/Kor STOP/Lbut-

ton to point to “D.S.T.”.

Then, press the F.FWD/Bor

REW/sbutton until [ON] appears.

Exit the Daylight-Saving Time mode

Press the MENU button on the remote control to

return to TV mode.

TO CANCEL THE DAYLIGHT-SAVING

TIME

Repeat steps [1] to [2], select [OFF] using the

F.FWD/Bor REW/sbutton.

–M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

BCHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– CHANNEL SET UP –

ADD / DELETE CH (TV)

BAUTO PRESET

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

BLANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

BSETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– SETTING CLOCK –

AUTO CLOCK [ON]

AUTO CLOCK CH [AUTO]

MANUAL CLOCK SET

BD.S.T. [ON]

T7205.QX33 01.3.19 10:26 AM Page 13

- 14 - EN

1B15

CLOCK SET UP

(AUTO / MANUAL)

Set the clock accurately for proper automatic timer

recording. If the Public Broadcasting Station (PBS) is

available in your area, follow “AUTO CLOCK SET-

TING”. If it is not, follow “MANUAL CLOCK SET-

TING”.

AUTO CLOCK SETTING

You can have the TV/VCR set the clock automatical-

ly by using the Public Broadcasting Station (PBS)

channel in your area. Once you have set the clock by

using the following procedure, the TV/VCR will

automatically monitor the correct time and date being

broadcast by the PBS station in your area, using a

new service called Extended Data Service (XDS).

Make sure ...

•TV/VCR power must be turned on.

•Confirm that the antenna connections are correct.

•The cable converter box must be turned on if your

TV/VCR is connected directly to it. (See NOTES:)

•The channel is properly set in advance. (See page

13.)

NOTES:

•Auto clock setting only needs to be set once. But it

can be done again if the clock’s time has become

incorrect for some reason.

•If the TV/VCR is connected directly to a cable

converter box or satellite box, the local PBS station

must be selected on the cable box itself, and the

TV/VCR must be set to the output channel of the

cable converter box or satellite box (usually chan-

nel 3 or 4), to be able to set up or correct the clock

automatically.

If you do not know what your local PBS station is,

then follow “Manual Clock Settings” on page 15.

The TV/VCR cannot control the channels of the

cable converter box or satellite box.

Select “SETTING CLOCK”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “SETTING

CLOCK”.

Then, press the F.FWD/Bbutton.

Set “AUTO CLOCK” to [ON]

Press the F.FWD/Bor REW/s

button repeatedly until [ON]

appears.

Enter the channel number for the PBS station

Press the PLAY/Kor STOP/Lbut-

ton to point to “AUTO CLOCK

CH”.

Then press the F.FWD/Bor

REW/sbutton until the channel

number for your local PBS station

appears.

If you do not know the PBS channel number, leave it

set to [AUTO] which is located before [2]. The

TV/VCR will search automatically all available

channels for the local PBS station, and will select

that channel.

Exit the Auto Clock Setting

Press the MENU button on the remote control to

return to TV mode.

Turn off the TV/VCR

Turn the TV/VCR off. Because the Auto Clock func-

tions automatically while the TV/VCR is off.

If you choose [AUTO],

•the TV/VCR must search until the PBS channel is

found. It must scan each channel for a couple of

seconds to determine if that channel is transmitting

the XDS signal.

•if the time, that is automatically set by this selected

PBS station is incorrect, it may not be your local

PBS station, but one from a different time zone. Or

there is a case that no channel is broadcasting the

XDS signal in your area, as shown by no time. In

these cases, you must manually enter the correct

local PBS station, or set the clock manually and

turn off the Auto Clock Setting feature.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

BSETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– SETTING CLOCK –

BAUTO CLOCK [ON]

AUTO CLOCK CH [AUTO]

MANUAL CLOCK SET

D.S.T. [OFF]

– SETTING CLOCK –

AUTO CLOCK [ON]

AUTO CLOCK CH [AUTO]

MANUAL CLOCK SET

BD.S.T. [OFF]

T7205.QX33 01.3.19 10:26 AM Page 14

- 15 - EN

1B15

MANUAL CLOCK SETTING

Make sure ...

•TV/VCR power must be turned on.

In the example below, the clock is to be set to:

DATE May 1st, 2001

SETTING TIME 5:40PM

Select “SETTING CLOCK”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “SETTING

CLOCK”.

Then, press the F.FWD/Bbutton.

Select “MANUAL CLOCK SET”

Press the PLAY/Kor STOP/Lbut-

ton to point to “MANUAL CLOCK

SET”.

Then, press the F.FWD/Bbutton.

Select the month

Press the PLAY/Kor STOP/Lbut-

ton until your desired month

appears. (Example: May →05)

Then, press the F.FWD/Bbutton.

Select the day

Press the PLAY/Kor STOP/Lbut-

ton until your desired day appears.

(Example: 1st →01)

Then, press the F.FWD/Bbutton.

Select the year

Press the PLAY/Kor STOP/Lbut-

ton until your desired year appears.

(Example: 2001)

Then, press the F.FWD/Bbutton.

Select the hour

Press the PLAY/Kor STOP/Lbut-

ton until your desired hour appears.

(Example: 5, PM)

Then, press the F.FWD/Bbutton.

Select the minute

Press the PLAY/Kor STOP/Lbut-

ton until the desired minute

appears. (Example: 40)

Start the clock

Press the MENU button on the

remote control.

Although seconds are not displayed,

they begin counting from 00 when

you press the MENU button on the

remote control. Use this feature to synchronize the

clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power

failure for more than 30 seconds, you may have to

reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock,

1)Follow steps [1] and [2].

2)Select where you want to change using the

F.FWD/Bor REW/sbutton.

3)Enter correct numbers using the PLAY/Kor

STOP/Lbutton.

4)Press the MENU button on the remote control to

start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on

your cable system, select “AUTO CLOCK” and

press the F.FWD/Bor REW/sbutton to turn [OFF]

this function. Then you can manually adjust the

clock.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

BSETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– SETTING CLOCK –

AUTO CLOCK [ON]

AUTO CLOCK CH [AUTO]

BMANUAL CLOCK SET

D.S.T. [OFF]

– MANUAL CLOCK SET –

MONTH DAY YEAR

0 5 / – – – – – – – – –

HOUR MINUTE

– – : – – – –

– MANUAL CLOCK SET –

MONTH DAY YEAR

0 5 / 0 1 – – – – – – –

HOUR MINUTE

– – : – – – –

– MANUAL CLOCK SET –

MONTH DAY YEAR

0 5 / 0 1 TUE 2 0 0 1

HOUR MINUTE

– – : – – – –

– MANUAL CLOCK SET –

MONTH DAY YEAR

0 5 / 0 1 TUE 2 0 0 1

HOUR MINUTE

0 5 : – – PM

– MANUAL CLOCK SET –

MONTH DAY YEAR

0 5 / 0 1 TUE 2 0 0 1

HOUR MINUTE

0 5 : 4 0 PM

5:40 PM

T7205.QX33 01.3.19 10:26 AM Page 15

- 16 - EN

1B15

ON SCREEN DISPLAY

To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote

control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:

When the Closed Caption mode is OFF:

•Counter mode: After 5 seconds, only the counter

remains. To clear it, press the DISPLAY button.

•Clock mode: After 5 seconds, only the clock and

the channel number remain. To clear them, press

the DISPLAY button.

When the Closed Caption mode is ON:

•The On Screen Display disappear after 5 seconds.

•This is true even if the MUTE button is pressed, or

the PAUSE/STILL button is pressed while record-

ing.

OFF mode Clock/Counter mode

SPECIAL FEATURES

REAL TIME TAPE COUNTER

This shows the elapsed recording or playback time in

hours, minutes, and seconds. (The displayed time will

not change on a blank tape or blank portions on the

tape.)The “–” indication will appear when the tape has

rewound further than “0:00:00” on the tape counter.

AUTO REWIND-EJECT

•When the end of a tape is reached during record-

ing, playback, or fast-forward, the tape will auto-

matically rewind to the beginning. After rewinding

finishes, the TV/VCR will eject the tape and turn

itself to off.

•This function is operative when Repeat Play is set

to the [OFF] position.

•The tape will not auto-rewind during timer record-

ing or One Touch Recording.

STOP 5:40 PM

CH2

SP COUNT 0:12:34

STOP STOP

SP SPCOUNT 0:12:34

COUNT 0:12:34

5:40PM

CH2

5:40PM

CH2

Counter

remains

Clock & Channel

remains

After 5 seconds After 5 seconds

OFF mode Counter mode Clock mode

T7205.QX33 01.3.19 10:26 AM Page 16

- 17 - EN

1B15

TV OPERATION

DEGAUSSING

Magnetism from nearby appliances might affect the

color of the TV picture.

If this happens, move this unit away from the appli-

ance. If the color is still not correct, disconnect power

cord from AC outlet then reconnect it after 30 minutes.

WATCHING A TV PROGRAM

Turn on the TV/VCR

Press the POWER button to turn on the TV/VCR.

Select the channel number

Press the CHANNEL Kor Lbutton to select your

desired channel number or press the number buttons

on the remote control.

Remember: If the TV/VCR is connected to a cable

box or satellite box, the TV/VCR must be on CH3 or

CH4, then the channel to be viewed must be selected

on the cable box or satellite box.

Adjust sound

Press the VOLUME XXor YYbutton

to adjust the volume.

REW/sF.FWD/B

BRIGHT to decrease to increase

brightness brightness

CONTRAST to decrease to increase

contrast contrast

COLOR to pale to brilliant

TINT to purple to green

SHARPNESS to soft to clear

GAME MODE

This function enables you to decrease the TV screen

contrast and making it suitable for use with a TV

GAME.

NOTE: This function can not be set during recording.

Press the GAME button on the

remote control. “GAME” appears

on the screen.

When you press the GAME button;

•The TV/VCR comes on automatically if it is off.

•The TV/VCR will be in external input mode auto-

matically.

TO CANCEL THE GAME MODE

Press the GAME button or CHANNEL Kor Lbut-

ton on the remote control.

PICTURE CONTROL

The TV/VCR’s picture controls – BRIGHT, CON-

TRAST, COLOR, TINT and SHARPNESS – are

preset to factory specifications. Although they are

usually the best, you may need to make some further

adjustments for a natural looking image.

NOTES:

•Procedures must be followed within 5 seconds or

the Picture Control mode will be cancelled.

•When setting the Picture Control, the Game mode

will be cancelled.

Make sure ...

•TV/VCR power must be turned on.

Select “PICTURE CONTROL”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to ”PICTURE CON-

TROL”.

Then, press the F.FWD/Bbutton.

Select item you want to adjust

Press the PLAY/Kor STOP/Lbut-

ton until desired control is dis-

played.

BRIGHT

CONTRAST

COLOR

TINT

SHARPNESS

Adjust the picture control

Press the F.FWD/Bor REW/sbutton to adjust to

your desired level.

•If there is a power failure of any kind, the unit will

retain its memory for this feature.

VOLUME 20

C C C C C C C C C C C C

GAME

– M E N U –

TIMER PROGRAMMING

BPICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

BRIGHT

– PPPPPPPPPPPPPPCCPPPPPPPPPPPPPP +

T7205.QX33 01.3.19 10:26 AM Page 17

- 18 - EN

1B15

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV programs,

movies, news, pre-recorded tapes with either a dia-

logue caption or text display.

CAPTION mode: By choosing the caption mode, you

can watch dramas, movies and news while captioning

the dialogues and the contents of news.

TEXT mode: By choosing the text mode, you can

watch half screen text information if you want.

1-2: You may get these captions or text information

by selecting either “1” or “2”. Caption “2” is used,

usually for a second language if available.

NOTE:

Not all programs are broadcast with closed captions.

Your television is designed to provide error free

closed captions from high quality antenna, cable and

VCR signals. Conversely, poor quality signals are

likely to result in caption errors or no captions at all.

Common signal conditions which may cause captions

errors are listed below:

•Automobile ignition noise

•Electric motor brush noise

•Weak snowy reception on TV screen

•Multiplex signal reception displaying picture

ghosts or airplane flutter.

•Playback of poorly recorded or worn VCR tapes.

NOTE:

If the TV/VCR displays a black box

on the TV screen, this means that

the TV/VCR is set to the TEXT

mode. To clear screen, select [CAP-

TION1], [CAPTION2] or [OFF].

Make sure ...

•TV/VCR power must be turned on.

Select “CAPTION”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “CAPTION”.

Select your desired caption menu

Press the F.FWD/Bor REW/s

button until your desired caption

menu appears.

([CAPTION1], [CAPTION2],

[TEXT1] or [TEXT2])

Exit the caption setting mode

Press the MENU button on the remote control to

return to TV mode.

TO CANCEL THE CLOSED CAPTION

SYSTEM

Repeat steps [1] and [2], select [OFF] using the

F.FWD/Bor REW/sbutton. Press the MENU but-

ton on the remote control to return to TV mode.

WHEN THE CLOSED CAPTION MODE

IS ON

The On-Screen Display will disappear after 5 sec-

onds.

•This is also true when the MUTE button is pressed,

and when the PAUSE/STILL button is pressed

while recording.

•If there is a power failure of any kind, the unit will

retain its memory for this feature.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

BCAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCKB

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

BCAPTION [CAPTION1]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

T7205.QX33 01.3.19 10:26 AM Page 18

- 19 - EN

1B15

V-CHIP SET UP

V-CHIP enables parents to prevent their children

from watching inappropriate material on TV.

V-CHIP reads the ratings for programming (except

for news and sports programs, unedited movies on

premium cable channels, and Emergency Broadcast

System signals), then denies access to programming

if the program’s rating meets the limitations you

select. In this case, “PROTECTED PROGRAM by

...” message appears on the TV screen.

To block ratings, follow the steps below.

•Programming may be rated by the Motion Picture

Association of America (MPAA) or according to

the Television Parental Guidelines. In order to

block any inappropriate programming, set your

limits in both places (MPAA RATING and TV

RATING).

TV RATING SET UP

Make sure ...

•TV/VCR power must be turned on.

Select “V-CHIP SET UP”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “V-CHIP SET UP”.

Then, press the F.FWD/Bbutton.

Select “TV RATING”

Press the PLAY/Kor STOP/Lbut-

ton to point to “TV RATING”.

Then, press the F.FWD/Bbutton.

Select your desired item

Press the PLAY/Kor STOP/Lbut-

ton to point to your desired item.

Then, press the F.FWD/Bbutton to

select [BLOCK] or [VIEW].

•When you select the rating category and turn it

[BLOCK], the higher rating will turn [BLOCK]

automatically. Also, the lower rating will turn

[VIEW] automatically.

•When you turn “TV-Y” to [VIEW], the all ratings

will turn to [VIEW] automatically.

Selection Rating Category Explanations

TV-Y Appropriate for all children

TV-Y7 Appropriate for children seven and older

TV-G General Audience

TV-PG Parental Guidance suggested.

TV-14 Unsuitable for children under 14

TV-MA Mature audience only

When you select TV-Y7, TV-PG, TV-14, or TV-MA

and you press the F.FWD/Bbutton, the sub-ratings

will appear on the TV screen.

If you select the rating category (example: TV-PG)

and turn it [BLOCK] or [VIEW], the sub-ratings

(example: V for Violence) will turn [BLOCK] or

[VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW]

individually when the rating category is set to

[BLOCK].

To set the sub-ratings individually, follow the steps

below.

•When you select [TV-Y7]:

Press the STOP/Lor PLAY/K

button to select “FV” (Fantasy

Violence).

Then, press the F.FWD/Bbutton

to select [BLOCK] or [VIEW].

•When you select [TV-PG], [TV-14] or [TV-MA]:

Press the STOP/Lor PLAY/K

button to select “D”(Suggestive

Dialog), “L”(Coarse Language),

“S”(Sexual Situation), or

“V”(Violence). Then, press the

F.FWD/Bbutton to select

[BLOCK] or [VIEW].

Note: When you select [TV-MA], “D” does not

appear on the TV screen.

•The sub-ratings which set to

[BLOCK] appears next to the rat-

ing category in the TV RATING

menu.

Exit the V-Chip setting mode

Press the MENU button on the remote control to

return to original mode.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

BV-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– V-CHIP SET UP –

BTV RATING

MPAA RATING

BTV–Y [VIEW]

TV–Y7 ( ) [VIEW]

TV–G [VIEW]

TV–PG ( ) [VIEW]

TV–14 ( ) [VIEW]

TV–MA( ) [VIEW]

TV–Y7 [BLOCK]

BFV [BLOCK]

TV–PG [BLOCK]

BD [BLOCK]

L [BLOCK]

S [BLOCK]

V [BLOCK]

BTV–Y [VIEW]

TV–Y7 ( ) [VIEW]

TV–G [VIEW]

TV–PG (DLSV) [BLOCK]

TV–14 (DLSV) [BLOCK]

TV–MA ( LSV) [BLOCK]

T7205.QX33 01.3.19 10:26 AM Page 19

Select your desired item

Press the PLAY/Kor STOP/Lbut-

ton to point to your desired item.

Then, press the F.FWD/Bbutton to

select [BLOCK] or [VIEW].

•When you select the rating cate-

gory and turn it [BLOCK], the higher rating will

turn [BLOCK] automatically. Also, the lower rat-

ing will turn [VIEW] automatically.

•When you turn “G” to [VIEW], the all ratings will

turn to [VIEW] automatically.

Exit the V-Chip setting mode

Press the MENU button on the remote control to

return to original mode.

- 20 - EN

1B15

MPAA RATING SET UP

Make sure ...

•TV/VCR power must be turned on.

Select “V-CHIP SET UP”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “V-CHIP SET UP”.

Then, press the F.FWD/Bbutton.

Select “MPAA RATING”

Press the PLAY/Kor STOP/Lbut-

ton to point to “MPAA RATING”.

Then, press the F.FWD/Bbutton.

Selection Rating Category Explanations

G General Audience

PG Parental Guidance suggested.

PG-13 Unsuitable for children under 13

R Restricted; under 17 requires accompa-

nying parent or adult guardian

NC-17 No one under 17 admitted

X Mature audience only

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

BV-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– V-CHIP SET UP –

TV RATING

BMPAA RATING

G [VIEW]

PG [VIEW]

PG–13 [VIEW]

BR [BLOCK]

NC–17 [BLOCK]

X [BLOCK]

T7205.QX33 01.3.19 10:26 AM Page 20

- 21 - EN

1B15

MTS(Multi-Channel Television sound)SYSTEM

You can record or listen to a program in MTS stereo.

CHECKING THE SELECTED MTS MODE

When you play a VHS tape, or receive a broadcast

on the TV/VCR tuner channel you are watching, the

status shown below will appear when you press the

DISPLAY button on the remote control.

PLAY B12:00AM

HIFI CH 123

STEREO/SAP

SP COUNT 0:00:00

1] When a program is broadcast in stereo, STEREO

appears on the TV screen.

2] When a program is broadcast in second audio,

SAP appears on the TV screen.

3] When a program broadcast both in stereo and sec-

ond audio, STEREO and SAP appear on the TV

screen.

NOTE: Although a program may be broadcast in

both stereo and second audio, you cannot

record in both stereo and second audio at

the same time.

4] While the TV/VCR is set in HIFI stereo mode and

playback mode. HIFI appears on the TV screen.

While the TV/VCR is set in monaural(MONO)

mode, HIFI disappears from the TV screen.

NOTE: If you play non-HIFI tapes while the

TV/VCR is set in HIFI, HIFI will disappear

from the TV screen and the TV/VCR will

play automatically in monaural.

MTS RECORDING/MONITOR MODE

Type of broadcast Display on STEREO/SAP Hi-Fi audio track(2-channel) Normal audio

the TV screen SELECTION L-channel R-channel track

Regular -None- -Invalid- Mono Mono Mono

(monaural audio)

Stereo broadcast STEREO -Invalid- L R L+R

Bilingual broadcast SAP STEREO* Main audio Main audio Main audio

program program program

SAP* Sub audio Sub audio Sub audio

program program program

Stereo & Bilingual STEREO STEREO* L R L+R

broadcast SAP SAP* sub audio sub audio sub audio

program program program

*You must select the recording mode in TV AUDIO [STEREO] or [SAP] when you record a broadcast.

SAP Second Audio Program, which means your

program, can also be received in a second

language or sometimes a radio station.

HIFI High Fidelity which produces better sound

than standard stereo TV/VCRs.

T7205.QX33 01.3.19 10:26 AM Page 21

- 22 - EN

1B15

SELECTING THE MTS SYSTEM

Make sure ...

•TV/VCR power must be turned on.

TO SELECT HIFI MODE

Select “USER’S SET UP”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “USER’S SET UP”.

Then, press the F.FWD/Bbutton.

Select“VCR AUDIO”

Press the PLAY/Kor STOP/Lbut-

ton to point to“VCR AUDIO”.

Then, press the F.FWD/Bbutton.

Select [HIFI]

Press the F.FWD/Bor REW/s

button until [HIFI] appears.

To return to TV mode

Press the MENU button on the remote control to

return to TV mode.

NOTES:

•Nomally, “HIFI” should be selected for playback-

with HIFI sound.

• When you play non-HIFI tapes, the TV/VCR will

play automatically in the monaural mode.

•The TV/VCR records automatically MTS broad-

casts in HIFI stereo sound unless you select SAP

mode recording before you begin recording.

TO SELECT STEREO, SAP, OR MONO

Select “USER’S SET UP”

Press the “MENU” button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “USER’S SET

UP”.Then, press the F.FWD/B

button.

Select “TV AUDIO”

Press the PLAY/Kor STOP/Lbut-

ton to point to“TV AUDIO”. Then,

press the F.FWD/Bbutton.

Select [STEREO], [SAP], or [MONO]

Press the F.FWD/Bor REW/sbutton until

[STEREO], [SAP], or [MONO] appears.

To return to TV mode

Press the MENU button on the remote control to

return to TV mode.

NOTES:

• You must select the recording mode,either TV

AUDIO [STEREO] or [SAP] when you record a

broadcast.

Refer to “MTS RECORDING/MONITOR MODE”.

• If you select second audio when second audio is not

available, the TV/VCR will record normal audio.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

BUSER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

BUSER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– USER’S SET UP –

RENTAL [OFF]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

BVCR AUDIO [HIFI]

TV AUDIO [STEREO]

– USER’S SET UP –

RENTAL [OFF]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

VCR AUDIO [HIFI]

BTV AUDIO [STEREO]

– USER’S SET UP –

RENTAL [OFF]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

BVCR AUDIO [HIFI]

TV AUDIO [STEREO]

TO SELECT MONO MODE

You can change the selection to “MONO” if you

want to listen to HIFI tapes in normal audio play-

back.

1) Press the MENU button on the remote control.

Press the PLAY/Kor STOP/Lbutton to point to

“USER’S SET UP”.Then, press the F.FWD/B

button.

2) Press the PLAY/Kor STOP/Lbutton to point to

“VCR AUDIO”. Then, press F.FWD/Bbutton.

3) Press the F.FWD/Bor REW/sbutton until

[MONO] appears.

4) Press the MENU button on the remote control to

return to TV mode.

T7205.QX33 01.3.19 10:26 AM Page 22

- 23 - EN

1B15

PLAYBACK

NORMAL PLAYBACK

Make sure ...

•TV/VCR power must be turned on.

Insert a prerecorded tape

If the erase-protection tab has been removed, the

TV/VCR will start playback automatically.

To begin playback

Press the PLAY button.

To stop playback

Press the STOP button when play-

back is completed.

TRACKING ADJUSTMENT

•Tracking adjustment will be set automatically

(Digital Tracking function) when you start play-

back.

•However when playing pre-recorded tapes or tapes

recorded on units other than your own, noise lines

(black and white streaks) may appear on the play-

back picture. If this occurs, you can adjust the

tracking control manually by pressing the CHAN-

NEL Kor Lbutton until the streaks disappear. To

return to the DTR function, stop the tape once and

start playback again.

•You can reduce the noise lines by pressing the

CHANNEL Kor Lbutton in slow mode, too.

Tracking adjustment in Slow mode will not be set

automatically.

NOTE:

•In Still mode, press the SLOW button and press the

CHANNEL Kor Lbutton until streaks disappear.

To return to Still mode, press the PAUSE/STILL

button again.

PICTURE SEARCH

This feature is very useful in finding or skipping over

a particular scene on a tape. In this mode, the sound

will be muted.

1)You may view a video tape at a high speed in

either a forward or reverse direction by pressing

the F.FWD or REW button. (in the SP / LP / SLP

modes)

2)Press it again and the TV/VCR will now search in

super high speed. (in the LP / SLP modes only)

NOTE: Tapes recorded in the SP or LP mode will

display a noise bar on the TV screen and the pic-

ture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

STILL PICTURE

You can view a still picture on the TV screen during

playback (the Still mode). Press the PAUSE/STILL

button during playback. Only tapes recorded in the

SLP mode will show the least amount of lines.Press

the PLAY button to return to playback.

NOTES:

•You can advance the picture one frame at a time by

pressing the PAUSE/STILL button during the Still

mode.

•If it is left in the Pause mode for more than five

minutes, the TV/VCR will automatically switch to

the Stop mode.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins

to vibrate vertically, stabilize the picture by pressing

the CHANNEL Kor Lbutton.

NOTE:

If there are video noise lines on the screen, see Tracking

Adjustment section.

SLOW MOTION

Press the SLOW button to reduce the playback speed.

The TV/VCR mutes the sound during slow motion.

Press the PLAY button to return to normal playback.

NOTE: If it is left in the Slow mode for more than

five minutes, the TV/VCR will automatically go into

the Stop mode.

PLAY B

STOP

T7205.QX33 01.3.19 10:26 AM Page 23

- 24 - EN

1B15

SPECIAL PLAYBACK

This function enables you to improve the picture

quality when playing back worn cassettes such as

rented tapes.

Select “USER’S SET UP”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “USER’S SET UP”.

Then, press the F.FWD/Bbutton.

Set “RENTAL” to [ON]

Press the PLAY/Kor STOP/Lbut-

ton to point to “RENTAL”.

Press the F.FWD/Bor REW/s

button until [ON] appears.

Exit the Rental setting

Press the MENU button on the remote control to

return to the TV mode.

Start playback

Press the PLAY button to start playback. “RENTAL

PLAY B” appears.

•Once you select the Rental mode, it stays in effect

even after you turn off the TV/VCR.

TO CANCEL THE RENTAL MODE

Repeat steps [1] and [2], select [OFF] using the

F.FWD/Bor REW/sbutton on the remote control.

Press the MENU button on the remote control to

return to TV mode.

If there is a power failure of any kind, the unit

will retain its memory for this feature.

Make sure ...

•TV/VCR power must be turned on.

•Insert a prerecorded tape.

•Before playback, follow steps below.

RENTAL PLAYBACK

The TV/VCR has the auto repeat function that allows

you to repeat a tape indefinitely without touching the

PLAY button.

ALL REPEAT: Repeat playback from the beginning

to the end of the tape.

BLANK REPEAT: Repeat playback from the begin-

ning to a blank part, which is blank for more than

10 seconds.

Select “USER’S SET UP”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “USER’S SET UP”.

Then, press the F.FWD/Bbutton.

Select “ALL” or “BLANK”

Press the PLAY/Kor STOP/Lbut-

ton to point to “REPEAT PLAY”.

Press the F.FWD/Bor REW/s

button repeatedly until your desired

selection [ALL] or [BLANK]

appears.

Exit the Repeat Play setting

Press the MENU button on the remote control to

return to the TV mode.

Start playback

Press the PLAY button to start the Repeat Play.

”REPEAT PLAY B” appears.

•Once you select the Repeat Play mode, it stays in

effect even after you turn off the TV/VCR.

•If the Rental mode is set [ON], the “RENTAL

PLAY B” display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the

F.FWD/Bor REW/sbutton on the remote control.

Press the MENU button on the remote control to

return to TV mode.

If there is a power failure of any kind, the unit

will retain its memory for this feature.

AUTO REPEAT PLAYBACK

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

BUSER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– USER’S SET UP –

BRENTAL [ON]

REPEAT PLAY [OFF]

AUTO RETURN [OFF]

VCR AUDIO [HIFI]

TV AUDIO [STEREO]

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

BUSER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– USER’S SET UP –

RENTAL [OFF]

BREPEAT PLAY [ALL]

AUTO RETURN [OFF]

VCR AUDIO [HIFI]

TV AUDIO [STEREO]

T7205.QX33 01.3.19 10:26 AM Page 24

- 25 - EN

1B15

Make sure ...

•TV/VCR power must be turned on.

•Insert a tape.

This function allows you to search easily a beginning

point that you want to review by rewinding or fast

forwarding.

NOTE:

Zero Return WILL NOT work on a blank tape or a

blank portion of a tape.

Stop a tape at your desired point

Rewind or fast forward the tape to the beginning

point at which you want to review.

Reset the counter to 0:00:00

Press the COUNTER RESET button repeatedly.

Begin recording or playback

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is

completed.

To activate “ZERO RETURN” mode

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “ZERO RETURN”.

Then, press the F.FWD/Bbutton.

The counter will appear on the TV screen.

The tape will automatically stop when the counter

returns to 0:00:00.

ZERO RETURN

The Time Search function makes it possible to quick-

ly advance the tape to your desired position simply

by entering the exact amount of playback time you

want to skip.

NOTES:

•Time Search can be set up to a maximum of 9

hours 50 minutes (9:50) by 10 minutes at a time.

TIME SEARCH

•This function will not operate in recording mode.

•This function is not operative when a cassette tape

is not inserted in the TV/VCR.

In the example below: To watch a program after 2

hour 50 minutes from the present position, in either

direction.

Insert a tape.

Select “TIME SEARCH” mode

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “TIME SEARCH”.

Then, press the F.FWD/Bbutton.

Enter your desired time

Press the PLAY/Kor STOP/Lbut-

ton until your desired time appears.

(Example: “2:50” stands for 2 hours

50 minutes)

If you wish to cancel the Time

Search at this point, press the MENU button on the

remote control.

Begin Time Search

By pressing the REW/sor F.FWD/Bbutton, the

TV/VCR will rewind or fast forward to the specified

point.

The time counts down as the searching progresses.

When 0:00 is reached, the tape will start playback

automatically.

TO CANCEL THE TIME SEARCH at this

point

Press the STOP/EJECT button on the TV/VCR or the

remote control. This will delete the selected time.

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

BZERO RETURN

TIME SEARCH

INDEX SEARCH

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

BTIME SEARCH

INDEX SEARCH

TIME SEARCH

2 : 50

T7205.QX33 01.3.19 10:26 AM Page 25

- 26 - EN

1B15

INDEX SEARCH

This feature provides a method of indexing the start-

ing point so that it can be easily returned to in either

fast forward or rewind mode.

•The index mark will be made automatically when

the REC button is pressed. It will also be marked at

the starting point of Timer recording and OTR.

•The index mark will not be recorded if the

PAUSE/STILL button is pressed and released dur-

ing recording.

•The time gap between making the index marks on

the tape should be greater than 1 minute for SP

recording, 2 minutes for LP recording and 3 min-

utes for SLP recording.

•In some cases, the index mark at the beginning of

video tape cannot be detected.

Example: You are watching program number 4 and

want to fast forward to program number 7. You

must skip three programs.

Select “INDEX SEARCH”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “INDEX SEARCH”.

Then, press the F.FWD/Bbutton

Enter your desired number

Press the PLAY/Kor STOP/Lbut-

ton until the number of programs

that you want to skip appears.

(Example: “03” for 3 programs)

•The Index Search mode will be

canceled if the procedures are not

activated in 30 seconds.

Begin Index Search

Press the REW or F.FWD button. The TV/VCR

begins rewinding or fast forwarding to the beginning

of desired program.

NOTE: Every time an index signal is skipped, the

number in the program indicator decreases by one.

After Index Search

When the preset program is reached, the TV/VCR

will start playback automatically.

•A video cassette must be inserted in the TV/VCR

for this function to work.

•The number of Index Searches can be set up to 20.

•

This function will not operate in the recording mode.

•When you want to cancel the Index Search while

in progress, press the STOP button.

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7

4321123

End of tape

Beginning of tape

CURRENT PLAYBACK PROGRAM

INDEX MARK

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

BINDEX SEARCH

INDEX SEACH

0 3

T7205.QX33 01.3.19 10:26 AM Page 26

- 27 - EN

1B15

RECORDING

Make sure ...

•TV/VCR power must be turned on.

•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to

the point at which you want to begin recording.)

NOTE: This unit will ONLYrecord and view the same channel.

You can ONLYwatch the same TV program that is

being recorded.

Select the channel to be recorded

Press the number buttons on the

remote control or the CHANNEL

Kor Lbutton.

Remember: If the TV/VCR is con-

nected to a cable box or satellite

box, the TV/VCR must be on CH3 or CH4, then the

channel to be recorded must be selected on the cable

box or satellite box.

Select the tape speed

Press the SPEED button to select

the desired tape speed (SP/ SLP).

Begin recording

Press the RECORD button.

Stop recording

Press the STOP button when recording is completed.

NORMAL RECORDING

Press the PAUSE/STILL button to

temporarily stop recording.

Press the PAUSE/STILL or

RECORD button to resume record-

ing.

NOTES:

•After five minutes, the TV/VCR will automatically

switch to the Recording mode to prevent tape dam-

age.

•If “CLOSED CAPTION (ON)” is selected, the On-

Screen Display will appear for 5 seconds, then dis-

appear.

SKIPPING UNWANTED

SCENES DURING RECORDING

CH 10

REC

PAUSE

T7205.QX33 01.3.19 10:26 AM Page 27

- 28 - EN

1B15

This function enables you to set a recording length

simply by pressing the REC/OTR button on the

TV/VCR.

Make sure ...

•TV/VCR power must be turned on.

•Insert a cassette tape with its erase prevention tab

in place. (If necessary, rewind or fast forward the

tape to the point at which you want to begin

recording.)

NOTES:

•This function CANNOT be done from the remote

control.

•Recording starts immediately when the REC/OTR

button is pressed.

•When the REC/OTR button is pressed 18 times, the

TV/VCR returns to the Normal Recording mode.

•To stop the OTR operation, press the STOP button

on the TV/VCR or on the remote control.

•To show the remaining time, press the DISPLAY

button on the remote control so that “OTR”

appears on the TV screen. (It will show up momen-

tarily then disappear.)

•Recording stops when 0:00 is reached.

•Please note that in the SLP mode maximum record-

ing time, assuming the tape is started at the begin-

ning, is 8 hours using T-160 (or 6 hours using T-

120).

•If the tape runs out before the end time, the

TV/VCR will switch to the Stop mode immediate-

ly, ejects the tape and turns itself off.

Select the channel to be recorded

Press the number buttons on the remote control or

the CHANNEL Kor Lbutton.

Remember: If the TV/VCR is connected to a cable

box or satellite box, the TV/VCR must be on CH3 or

CH4, then the channel to be recorded is selected on

the cable box or satellite box.

Select the tape speed

Press the SPEED button to select the desired tape

speed (SP/ SLP).

Begin OTR

Press the REC/OTR button on the

TV/VCR as many times as needed.

The recording length will be deter-

mined by the number of times you

press the REC/OTR button. Each additional push will

increase the recording time by 30 minutes. It is set up

to 8 hours.

OTR (One Touch Recording) Push(es) Display Recording length

1 push (normal recording)

2 pushes 0:30 30 minutes

3 pushes 1:00 60 minutes

17 pushes 8:00 480 minutes

You can make copies of video tapes made by friends

or relatives for your enjoyment.

Connect your TV/VCR and a Source (Playing) VCR

using the following diagram.

1)Insert a pre-recorded video cassette into the Source

(Playing) VCR or camcorder.

2)Insert a blank video cassette, or one you want to

record over, into the TV/VCR’s cassette compart-

ment.

3)Press the SPEED button on remote control for the

TV/VCR to select the desired recording speed

(SP/SLP).

4)Press the CHANNEL Kor Lbutton on the

TV/VCR until “AUX” appears on the screen.

5)Press the RECORD button on the TV/VCR.

6)Begin playback of the tape in the source (Playing)

VCR or camcorder.

NOTE: For best results during dubbing, use the

TV/VCR’s front panel controls whenever possible.

The remote control might affect the source (Playing)

VCR’s playback operation.

COPYING A VIDEO CASSETTE

(Requires a VCR or camcorder)

WARNING: Unauthorized recordings of

copyrighted video tapes may be an

infringement of copyright laws.

VIDEO HEADPHONE

AUDIO

VIDEO

OUT

AUDIO

OUT

[Fig.8]

[Ex: Source (playing)

VCR or camcorder]

Audio/Video

adapter cable

(not supplied)

[The TV/VCR]

OTR(2 : 30)

T7205.QX33 01.3.19 10:26 AM Page 28

TIMER

You may set the TV/VCR to start and end a record-

ing while you are away. You can set 8 programs to

record on specific days, daily or weekly within a 1

year period.

In the example below, the timer is being set to record:

DATE: July 6th, 2001

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL: CH61

TAPE SPEED: SP

Make sure ...

•If a cable box or satellite box is connected with the

TV/VCR you will be limited to record only one

channel. And the channel selector on the TV/VCR

must be selected to the output channel of the boxes

CH 3 or CH 4 and then the actual channel to be

recorded must be selected on the boxes.

•Clock must be set to the correct time and date

before setting the timer.

•TV/VCR power must be turn on to program it.

•Insert a cassette tape with its erase prevention tab

in place. (If necessary, rewind or fast forward the

tape to the point at which you want to begin

recording.)

•The channel you want to record is properly set in

advance. (See page 13.)

Avoid over lap of programs ...

There is a chance that a program will not be record-

ed. when programs overlap;

•The program with an earlier start has priority.

•Once the earliest program finishes, the overlapping

programs will begin recording in sequence.

•The illustration below demonstrates the sequence

of recordings.

Program 1 10:00AM - 11:00AM

Program 2 9:00AM - 10:00AM

Program 3 9:30AM - 12:00PM

Select “TIMER PROGRAMMING”

Press the MENU button on the remote control.

Confirm “TIMER PROGRAMMING” is pointed by

pressing the PLAY/Kbutton.

AUTOMATIC TIMER

RECORDING

9:00AM 10:00AM 12:00PM

Program 1

10:00AM-11:00AM

Program 2

9:00AM-10:00AM

Program 3

9:30AM-12:00PM

11:00AM

Recording Sequence

*Recording period is SHADED

And press the F.FWD/Bbutton.

•If you have not yet set the clock,

“MANUAL CLOCK SET”

appears. If so, follow stops [3] to

[8] on page 15. Then set the timer

recording.

Select your desired program position (1~8)

Press the PLAY/Kor STOP/Lbut-

ton to select the desired program

position.

Then, press the F.FWD/Bbutton.

Set the channel number

Press the PLAY/Kor STOP/Lbut-

ton until the desired channel num-

ber appears.

(Example: CH61)

Then, press the F.FWD/Bbutton.

Remember: If the TV/VCR is connected to a cable

box or satellite box, the TV/VCR must be on CH3 or

CH4, then the channel to be recorded is selected on

the cable box or satellite box.

Select once, every day or weekly recording

For once recording :

Press the PLAY/K(up) button

until the desired date appears.

(Example: “7/06” for July 6th).

Then, press the F.FWD/Bbut-

ton.

For every day recording : To record a TV program

at the same time on the same channel every day.

(Example: Monday through Sunday)

Press the STOP/L(down) button

until “EVRY DAY” appears.

Then, press the F.FWD/Bbut-

ton.

For weekly recording : To record a TV program at

the same time on the same channel every week.

(Example: every Monday)

Press the STOP/L(down) button

until “EVRY” and your desired

day of the week appear together.

Then, press the F.FWD/Bbut-

ton.

– M E N U –

BTIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B- - -/- - - - - -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 -/- - - - - -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 EVRY DAY -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/06 FRI -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 EVRY MON -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

- 29 - EN

1B15

T7205.QX33 01.3.19 10:26 AM Page 29

To shift the time schedule of an automatic timer

recording.

1)Press the POWER button.

2)Repeat step [1] on page 29.

3)Press the RECORD button and select the desired

program using the PLAY/Kor STOP/Lbutton.

4)Press the RECORD button again.

Each additional push will shift forward the

begin/end time for recording by 10 minutes. When

the recording is already in progress, each additional

push will shift forward the end time only. If you

want to cancel while setting, press the

PAUSE/STILL button on the remote control. The

recording time returns to the original time.

NOTE: When you shift forward the time schedule

during recording, the recording speed will automati-

cally be set to the SLP mode.

5)Press the F.FWD/Bor REW/sbutton to exit the

setting menu. Then press the MENU button on the

remote control to return to original mode.

TO CORRECT A PROGRAM

•While setting a program; press the REW/sbut-

ton to go back one step and enter the correct num-

bers using the PLAY/Kor STOP/Lbutton.

•After setting a program;

1)Press the POWER button.

2)Repeat steps [1] - [2] on page 29.

3)Press the F.FWD/Bbutton (or press the REW/s

button to go back one step) until the part you

want to correct begins flashing, then make the

changes pressing the PLAY/Kor STOP/Lbut-

ton.

4)Press the POWER button to set automatic timer

recording.

TO CANCEL AN AUTOMATIC TIMER

RECORDING

•After setting a program;

1)Press the POWER button.

2)Repeat steps [1] ~ [2] on page 29 and select a

program you want to cancel.

3)Press the T-PROG. CLEAR button.

4)Press the MENU button on the remote control to

return to TV mode.

•While recording is in progress;

1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

Set beginning hour

Press the PLAY/Kor STOP/Lbut-

ton until the desired hour appears.

(Example: “ 7, PM” for 7:30PM)

Then, press the F.FWD/Bbutton.

Set beginning minute

Press the PLAY/Kor STOP/Lbut-

ton until the desired minute

appears. (Example: “30” for

7:30PM)

Then, press the F.FWD/Bbutton.

Set end hour

Press the PLAY/Kor STOP/Lbut-

ton until the desired hour appears.

(Example: “8, PM” for 8:50PM)

Then, press the F.FWD/Bbutton.

Set end minute

Press the PLAY/Kor STOP/Lbut-

ton until the desired minute

appears. (Example: “50” for

8:50PM)

Then, press the F.FWD/Bbutton.

Set the tape speed

Press the PLAY/Kor STOP/Lbut-

ton until the desired tape speed

appears. (Example: SP)

Finish setting the program

Press the F.FWD/Bor REW/sbutton. The program

is now completed.

•To set another program, repeat steps [2] to [10].

•Press the MENU button on the remote control to

return to original mode.

Set the timer

Press the POWER button to set automatic timer

recording. The TIMER REC indicator lights up.

•You must turn off the TV/VCR to activate auto-

matic timer recording.

If power is not turned off and you continue watch-

ing TV, “TIMER REC STANDBY” starts flashing

on the TV screen 2 minutes before the programmed

start time.

TIMER PROGRAM EXTENSION

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/06 FRI 7:12PM-:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/06 FRI 7:30PM-:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/06 FRI 7:30PM8:30PM- -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/06 FRI 7:30PM8:50PM- -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/06 FRI 7:30PM8:50PMSP

- - -/- - - - - -:- - -:- - - -

- 30 - EN

1B15

T7205.QX33 01.3.19 10:26 AM Page 30

- 31 - EN

1B15

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator

goes off.

2)Press the MENU button on the remote control.

3)Confirm “TIMER PROGRAMMING” is pointed.

4)Press the F.FWD/Bbutton. The details of pro-

grams appear on the TV screen.

5)Press the MENU button on the remote control to

return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

•Make sure the channel you want to record is prop-

erly set in advance.

•It is not necessary to press the RECORD button for

timer recording.

•Recording begins automatically at the Start time.

•If you are recording using a Timer mode, you may

not operate the unit manually.

•The erase-prevention tab on the cassette must be in

place (or you must put tape over the hole).

•If the erase-prevention tab is removed, the cassette

will be ejected when the POWER button is pressed

to off.

•If the tape runs out before the end time, the

TV/VCR will switch to the Stop mode immediate-

ly, and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished,

the beginning of the recorded program(s) can be

searched for automatically.

Select “USER’S SET UP”

Press the MENU button on the

remote control.

Press the PLAY/Kor STOP/Lbut-

ton to point to “USER’S SET UP”.

Then, press the F.FWD/Bbutton.

Set “AUTO RETURN” to [ON]

Press the PLAY/Kor STOP/Lbut-

ton to point to “AUTO RETURN”.

Press the F.FWD/Bor REW/s

button until [ON] appears.

Auto Return will begin

When all the timer recordings are completed, the

TV/VCR will rewind to the beginning of the record-

ed program(s).

NOTE:

•If you press the POWER button while tape is

rewinding, the Auto Return will stop.

Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN

MODE

Repeat steps [1] and [2], select [OFF] using the

F.FWD/Bor REW/sbutton.

If there is a power failure of any kind, the unit

will retain its memory for this feature.

WAKE UP TIMER

The Wake Up Timer function turns on the TV/VCR

without using the POWER button after a desired

period of time.

NOTES:

•Use the remote control for this procedure.

•Clock must be set to the correct time before setting

the timer.

•If you want to select [TAPE], you must insert a

cassette tape in the TV/VCR. The tape will start

playback automatically on your desired time.

Select “WAKE UP TIMER”

Press the WAKE UP/SLEEP button

on the remote control once, and

confirm “ON/OFF” is pointed.

Press the F.FWD/Bor REW/s

button until [ON] appears.

Select “TV” or “TAPE”

Press the PLAY/Kor STOP/Lbut-

ton until to point to “TV/TAPE”.

Press the F.FWD/Bor REW/s

button, and select [TV] or [TAPE].

– M E N U –

TIMER PROGRAMMING

PICTURE CONTROL

SETTING CLOCK

CHANNEL SET UP

BUSER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– USER’S SET UP –

RENTAL [OFF]

REPEAT PLAY [OFF]

BAUTO RETURN [ON]

VCR AUDIO [HIFI]

TV AUDIO [STEREO]

WAKE UP BON/OFF [ON]

TIMER TV/TAPE [TV]

TIME [12:00AM]

WAKE UP ON/OFF [ON]

TIMER BTV/TAPE [TV]

TIME [12:00AM]

T7205.QX33 01.3.19 10:26 AM Page 31

Set wake up time

Press the PLAY/Kor STOP/Lbut-

ton until to point to “TIME”.

Press the F.FWD/Bor REW/s

button until your desired wake up

time appears.

Each additional push will increase (or decrease) the

time by 10 minutes.

Exit the Wake Up Timer setting

Press the MENU button on the remote control to

return to TV mode.

TO CANCEL THE WAKE UP TIMER

Repeat step [1] but select [OFF].

CABINET CLEANING

•Wipe the front panel and other exterior surfaces of

the TV/VCR with a soft cloth immersed in luke-

warm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insec-

ticide liquid near the TV/VCR. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

AUTO HEAD CLEANING

•Automatically cleans video heads as you insert or

remove a cassette, so you can see a clear picture.

•Playback picture may become blurred of interrupt-

ed while the TV program reception is clear. Dirt

accumulated on the video heads after long periods

of use, or the usage of rental or worn tapes can

cause this problem.

If a streaky or snowy picture appears during play-

back, the video heads in your TV/VCR may need

to be cleaned.

SLEEP TIMER

The Sleep Timer function turns off the TV/VCR

without using the POWER button after a desired

period of time.

NOTE:

•This function does not operate during Recording

mode.

Select “SLEEP TIMER”

Press the WAKE UP/SLEEP button on the remote

control until “SLEEP TIMER” appears.

Set sleep time

Press the PLAY/K, STOP/L,

F.FWD/Bor REW/sbutton until

your desired sleep time appears.

Each additional push will increase

the time by 30 minutes up to 120

minutes.

Press the MENU button on the remote control to exit

the Sleep Timer setting.

TO CANCEL THE SLEEP TIMER

Press the WAKE UP/SLEEP button on the remote

control until “SLEEP TIMER” appears.

To view the time left for sleep timer press the WAKE

UP/SLEEP button twice, then press the MENU but-

ton on the remote control to exit the sleep timer set-

ting.

MAINTENANCE

1.Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the prob-

lem, please call our help line at 1-800-968-3429, to

locate an Authorized Service Center.

NOTES:

•Remember to read the instructions included with

the video head cleaner before use.

•Clean video heads only when problems occur.

SERVICING

•Should your TV/VCR become inoperative, do not

try to correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord, and please call our help line at 1-800-

968-3429, to locate an Authorized Service Center.

SLEEP TIMER [2:00]

WAKE UP ON/OFF [ON]

TIMER TV/TAPE [TV]

BTIME [12:00AM]

- 32 - EN

1B15

T7205.QX33 01.3.19 10:26 AM Page 32

TROUBLESHOOTING GUIDE

If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR,

locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to

remedy the problem.

PROBLEM CORRECTIVE ACTION

No power. •Make sure the AC cord is connected to an AC outlet.

•Make sure the power is turned on.

No picture and sound. •Make sure the AC cord is connected to an AC outlet.

•Check antenna connection.

•Let the TV/VCR program its’ tuner memory.

No picture or poor picture on •Adjust direction or replace antenna.

TV/VCR. •Adjust picture controls.

No sound or poor sound. •Adjust volume control on remote control or main unit.

•Press the MUTE button to restore sound.

Timer recording is not possible. •Make sure the timer recording is set correctly.

•Make sure the power is off.

•Make sure the TV/VCR clock is set correctly.

Cannot go into Record mode. •Make sure the tape has an erase-prevention tab. If need, cover the

•hole with plastic tape.

Playback picture is partially noisy. •Adjust tracking control for a better picture using the CHANNEL K

•or Lbutton on the TV/VCR.

No picture but the audio is OK in •Head cleaning may be necessary. Refer to “AUTO HEAD

playback. •CLEANING” on page 32.

No operation by infrared Remote •Make sure the AC cord is connected to an AC outlet.

Control. •Check batteries in remote control.

Video or color fades in and out •You can not copy a copyrighted video tape. You are experiencing

when making a copy of a video tape

.•copy guard protection.

CLOSED CAPTION PROBLEM POSSIBLE REMEDY

My TV/VCR is showing captions • You are watching a live broadcast and spelling errors made by the

that are misspelled. •closed captioning production company may pass through uncorrected.

•A prerecorded program will not show any misspelled words because

• of the normal time available for editing the captions.

My TV/VCR will not show the text • Captions that are delayed a few seconds behind the actual dialogue

in its entirety or there is a delay of •are common for live broadcast. Most captioning production companies

what is being said. •can display a dialogue to a maximum of 220 words per minute. If a

•dialogue exceeds that rate, selective editing is used to insure that the

•captions remain up-to-date with the current TV screen dialogue.

My captions are scrambled with • Interference caused by building, power lines, thunderstorms, etc.

white boxes on the TV screen. •may cause scrambled or incomplete captions to appear.

My program guide listed a TV show

• Broadcasters may at times use a time compression process to speed

as being closed captioned but none •up the actual program so that additional advertising time can be

of the captions were displayed. •given. Since the decoder cannot read the compressed information,

•captions will be lost.

My prerecorded video tape does not

• The video tape was either an illegal copy or the tape duplicating

show any captions. The tape box •company accidentally left out the captioning signals during the

mentions it being closed captioned. •copying process.

My TV screen shows a black box • You are in the TEXT mode. Select CAPTION mode to CAPTION

on certain channels. •[OFF].

- 33 - EN

1B15

T7205.QX33 01.3.19 10:26 AM Page 33

SPECIFICATIONS

GENERAL SPECIFICATIONS

CRT : 19 inch in-line gun, 90˚

deflection tube

Television system : NTSC-M

Closed caption system :§15.119/FCC

Video Heads : Rotary four-head

Tape width : 1/2 inch

Tape speed

SP : 33.40mm/sec.

LP : 16.67mm/sec.

SLP : 11.12mm/sec.

Tuner channel

TV VHF Low : #2~#6

TV VHF High : #7~#13

TV UHF : #14~#69

CATV

VHF : 5A

MID band : A5~A1, A~I

SUPER band : J~W

HYPER band : W+1~W+84

FM : 88~108MHz

Terminals

Antenna input : VHF/UHF 75 ohms

unbalanced

Video input : RCA connector [1

Audio input : RCA connector [1

Earphone : 1/8” monaural (3.5 mm)

ELECTRICAL SPECIFICATIONS

Video input level : 0.5~2.0Vp-p

Audio input level : -15dBs

Video S/N ratio : More than 46dB

Audio S/N ratio : More than 43dB

OTHER SPECIFICATIONS

Power requirement : AC 120V/60Hz

Power consumption : 90W

Dimensions : H:19-5/8” (498mm)

W:19-3/16” (487mm)

D:18-11/16” (474mm)

Weight : 44.1 lbs (20kg)

•Designs and specifications are subject to change

without notice and without our legal obligation.

•If there is a discrepancy between languages, the

default language will be English.

CABLE CHANNEL DESIGNATIONS

If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels

with letters or letter-number combinations. Please check with your local cable company. The following is a

chart of common cable channel designations.

TV Display

CATV channel

TV Display

W+80 W+81 W+82 W+83 W+84

W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79

W+55 W+56 W+57 W+58 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64

W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54

W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39

W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24

A-5

R S T U V W W+1 W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9

CDEFGHI JKLMNOPQ

5A 2 3 4 5 6 7 8 9 10 11 12 13 A B

123456789101112131415

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

106 107 108 109 110 111 112 113 114 115 116 117 118 119 120

121 122 123 124 125

CATV channel

- 34 - EN

1B15

T7205.QX33 01.3.19 10:26 AM Page 34

- 35 - ES

1B15

1Toma de auriculares (HEADPHONE)– Para

conectar los auriculares (no suministrados) y escuchar

en privado. La toma es mono y tiene un tamaño de 3,5

mm.

2Toma de entrada de audio (AUDIO)– Conéctela a

la toma de salida de audio de su equipo de audio,

videocámara u otra videograbadora.

3Toma de entrada de vídeo (VIDEO)– Conéctela a

la toma de salida de vídeo de su videocámara u otra

videograbadora.

4Botón de parada (STOP)– Púlselo para detener la

cinta.

Botón de expulsión (EJECT)–Púlselo en el modo

de parada para expulsar la cinta del

televisor/videograbadora.

Botón L–

•Púlselo para seleccionar los modos de ajuste desde el

menúde la pantalla.

•Púlselo para introducir dígitos cuando establezca un

programa.

(Por ejemplo: Para ajustar el reloj o establecer un pro-

grama de temporizador)

5Botón de rebobinado (REW)– Púlselo para rebobi-

nar la cinta, o para ver la imagen en retroceso rápido

durante el modo de reproducción. (Búsqueda con

rebobinado)

Botón s–

•Púlselo para seleccionar un modo desde un menúpar-

ticular.

(Por ejemplo: IDIOMA o ADJUST DE USER)

6Botón de reproducción (PLAY)– Púlselo para ini-

ciar la reproducción.

Botón K–

•Púlselo para seleccionar los modos de ajuste desde el

menúde la pantalla.

•Púlselo para introducir dígitos cuando establezca un

programa.

(Por ejemplo: Para ajustar el reloj o establecer un pro-

grama de temporizador)

7Botón de avance rápido (F.FWD)– Púlselo para

avanzar rápidamente la cinta, o para ver la imagen en

avance rápido durante el modo de reproducción.

(Búsqueda con avance rápido)

Botón B–

•Cuando establezca un programa (por ejemplo: para

ajustar el reloj o para establecer un programa de tem-

porizador), púlselo para determinar su elección y vaya

al paso siguiente que quiera introducir.

•Púlselo para determinar los modos de ajuste desde el

menúde la pantalla.

•Púlselo para seleccionar un modo desde un menúpar-

ticular.

(Por ejemplo: IDIOMA o ADJUST DE USER)

8Botón de grabación (REC)– Púlselo para iniciar la

grabación manual.

Botón de grabación de un toque (OTR)– Activa

la grabación de un toque. (Sólo en el televisor/videograbadora)

9Indicador de grabación (RECORD)– Parpadea

durante la grabación.

Se enciende en el modo de espera de la grabación con

temporizador.

10 Ventanilla sensora del mando a distancia–

Recibe las señales infrarrojas procedentes del mando a

distancia.

11 Botones de canales (CHANNEL K/ L)– Púlselos

para seleccionar los canales deseados para ver o grabar.

Se puede mostrar el menú principal en la pantalla del

televisor pulsando repetidamente este botón del televi-

sor/videograbadora.

Función de seguimiento– Pulse los botones para

minimizar el ruido de vídeo (líneas o puntos en la pan-

talla) durante la reproducción.

12 Botones de volumen (VOLUME XX/ YY)– Ajustan

el nivel del volumen.

13 Botón de la alimentación (POWER)– Púlselo

para encender y apagar el televisor/videograbadora.

Púlselo para activar la grabación con temporizador.

14 Compartimiento del videocasete

15 Botones numerados– Púlselos para seleccionar los

canales deseados para ver o grabar. Para seleccionar

canales del 1 al 9, pulse primero el botón 0 y luego el

botón 1 a 9.

Botón +100– Cuando seleccione canales de televisión

por cable cuyo número sea superior al 99, pulse

primero este botón, y luego pulse los dos últimos dígi-

tos. (Para seleccionar el canal 125, pulse primero el

botón “+100” y luego el “2” y el “5”.)

16 Botón de menú (MENU)– Púlselo para visualizar el

menúprincipal en la pantalla del televisor.

17 Botón del visualizador (DISPLAY)– Visualiza el

contador o el número del canal actual y la hora actual

en la pantalla del televisor.

18 Botón de velocidad de cinta (SPEED)– Púlselo

para elegir la velocidad de grabación deseada: SP/SLP.

19 Botón T-PROG. CLEAR– Púlselo para cancelar un

programa de temporizador.

Botón de reposición del contador (COUNTER

RESET)– Púlselo para reponer el contador a 0:00:00.

20 Botón de juego (GAME)– Establece el modo del

juego y el modo de entrada externa al mismo tiempo.

21 Botón de cámera lenta (SLOW)– Pulselo para

activar la reproducción a cámera lenta.

22 Botón de pausa/imagen fija (PAUSE/STILL)–

Púlselo para detener temporalmente la cinta durante la

grabación o para ver una imagen fija durante la repro-

ducción.

CONTROLES DE OPERACIÓN Y SUS FUNCIONES

NOTA:

No recomendamos utilizar mandos a distancia universales. No todas las funciones pueden ser controladas mediante un

mando a distancia universal. Si decide utilizar un mando a distancia universal con esta unidad, tenga en cuenta que con el

número de código dado tal vez no se pueda controlar la unidad. En este caso, póngase en contacto con el fabricante del

mando a distancia universal.

Consulte las figuras 1-3 de las páginas 8 y 9.

T7205ES.QX33 01.3.19 10:27 AM Page 35

- 36 - ES

1B15

CONEXIONES DE ANTENA/CABLE

ANTENA COMBINADA DE VHF/UHF

La antena de varilla de VHF/UHF (no incluído) es

desmontable. Inserte el vástago de la antena en el agujero

de la parte trasera superior del televisor/videograbadora.

Conecte la varilla de antena de VHF/UHF o la antena com-

binada de VHF/UHF al terminal ANT. del

televisor/videograbadora.

ANTENAS SEPARADAS DE VHF/UHF

En algunos lugares será necesario utilizar una antena exte-

rior.

CABLE SIN CONVERTIDOR/DESCODIFICADOR

Utilice esta conexión si su sistema de televisión por cable

se conecta directamente a su televisor/videograbadora sin

convertidor.Utilizando esta conexión usted podrá:

1)Utilizar el mando a distancia del televisor/videograbado-

ra para seleccionar canales.

2)Programar uno o más canales sin codificar para realizar

la grabación automática con temporizador.

NOTA: Con esta unidad SÓLO se podrá grabar y ver un

mismo canal al mismo tiempo.

CABLE CON CONVERTIDOR/DESCODIFICADOR

O CONVERTIDOR DE EMISIONES VÍA SATÉLITE

Si su servicio de televisión por cable le suministra un con-

vertidor, o si usted utiliza un sistema de emisiones vía

satélite, usted podrá utilizar las conexiones básicas.

Utilizando estas conexiones, usted también podrá grabar

canales codificados. Sin embargo, la selección de los

canales deberá hacerse con el convertidor de televisión por

cable con el convertidor de emisiones vía satélite. Esto sig-

nifica que los canales no podrán ser cambiados con el

mando a distancia del televisor/videograbadora. La

grabación inatendida se limita a un canal cada vez.

PARA GRABAR UN CANAL

CODIFICADO/DESCODIFICADO

1. Ajuste el selector de canales del televisor/videograbado-

ra al canal de salida del convertidor de televisión por

cable o del convertidor de emisiones vía satélite. (Ej.:

CA3)

2. Seleccione el canal que desee grabar de su convertidor

de televisión por cable o del convertidor de emisiones

vía satélite.

MODO DE ENTRADA EXTERNA

1)Abra la tapa del compartimiento de las pilas del mando

a distancia presionándola en el sentido de la flecha.

2)Inserte 2 pilas tamaño “AA” en el compartimiento de las

pilas, en el sentido indicado por las marcas de polaridad

(+/-).

3)Vuelva a poner la tapa.

Cuando utilice una señal de entrada externa (otra

videograbadora o una videocámara), conecte los cables de

salida de audio/vídeo del equipo de reproducción a las

tomas AUDIO L/R IN/VIDEO IN de su

televisor/videograbadora. Y luego pulse el botón CHAN-

NEL Ko Lhasta que “AUX” aparezca en la pantalla.

Usted puede programar el temporizador para que explore

todos los canales que puedan recibirse en su zona.

INSTALACIÓN DE LAS PILAS

23 Botón de silenciamiento (MUTE)– Silencia el

sonido. Púlselo de nuevo para recuperar el sonido.

24 Botón de retorno de canal (CHANNEL

RETURN)– Púlselo para volver al canal anterior. Por

ejemplo, pulsando una vez este botón, la visualización

del canal cambiará de 3 (canal actual) a 10 (canal ante-

rior), y al pulsarlo por segunda vez, el canal cambiará

del 10 al 3.

25 Botón del temporizador despertador/para

dormir (WAKE-UP/SLEEP)– Ajusta el tempo-

rizador para despertarse/dormir.

26 Cordón de alimentación– Conéctelo a la toma de

CA estándar (120V/60Hz).

27 Terminal de antena (ANT.)– Para conectar una

antena o sistema de televisión por cable.

Consulte la figura 4-7 en la página 10 y 11.

T7205ES.QX33 01.3.19 10:27 AM Page 36

- 37 - ES

1B15

PREPARACIÓN DE CANALES POR

PRIMERA VEZ

1) Enchufe el cable de alimentación del

televisor/videograbadora en una toma de CA estándar.

NOTA: Si aparezcan algunos digitos en el rincón de la

pantalla, pulse el botón POWER sin desenchufar el cable

de alimentación.

2) Pulse el botón POWER para encender el

televisor/videograbadora.

3) Seleccione “ENGLISH” o “ESPAÑOL” utilizando el

botón F.FWD/Bo REW/s. “[ ]” indica el idioma

seleccionado.

4) Pulse el botón PLAY/Ko STOP/Lpara señalar

“AUTOPRESELECCION”.

Luego pulse el botón F.FWD/B. El sintonizador explo-

rará y memorizará todos los canales activos de su área.

NOTAS:

•El televisor/videograbadora distingue entre los canales

de televisión estándar y los canales de televisor por

cable.

•Si desea reproducir o grabar una cinta ANTES de prea-

justar el sintonizador, usted tendrá que pulsar el botón

MENU en el mando a distancia. Para preajustar de

nuevo el sintonizador, consulte “REPETICIÓN DE LA

PREPARACIÓN DE CANALES”.

•La unidad de televisor/videograbadora puede reconocer

los canales de TV como ellos de TV por cable a causa

de los condiciones de recepción. En este caso, pruebe el

preajuste automático de nuevo en los condiciones finas

de recepción.

5) El sintonizador se para en el canal memorizado más

bajo. Si desea recuperar canales seleccionados, usted

podrá seleccionar directamente el canal deseado con los

botones numerados del mando a distancia o con los

botones CHANNEL Ko L.

Cerciórese...

•La alimentación del televisor/videograbadora deberá

estar conectada.

En el ejemplo de abajo, el reloj va a ajustarse así:

FECHA: 1 de mayo de 2001

HORA: 5:40 PM

1) Pulse el botón MENU en el mando a distancia.

Pulse el botón PLAY/Ko STOP/Lpara indicar

“AJUSTE RELOJ”.

Luego, pulse el botón F.FWD/B.

2) Pulse el botón PLAY/Ko STOP/Lpara indicar

“AJUSTE MANUAL RELOJ”.

Luego, pulse el botón F.FWD/B.

3) Pulse el botón PLAY/Ko STOP/Lhasta que aparezca

el mes deseado. (Ejemplo: Mayo - 05)

Luego, pulse el botón F.FWD/B.

4) Pulse el botón PLAY/Ko STOP/Lhasta que aparezca

el día del mes deseado. (Ejemplo: 1 - 01)

Luego, pulse el botón F.FWD/B.

5) Pulse el botón PLAY/Ko STOP/Lhasta que aparezca

el año deseado. (Ejemplo: 2001)

Luego, pulse el botón F.FWD/B.

6) Pulse el botón PLAY/Ko STOP/Lhasta que aparezca

la hora deseada. (Ejemplo: 5, PM)

Luego, pulse el botón F.FWD/B.

7) Pulse el botón PLAY/Ko STOP/Lhasta que aparezca

el minuto deseado. (Ejemplo: 40)

8) Pulse el botón MENU en el mando a distancia. Aunque

los segundos no se visualizan, éstos empiezan a contar

desde 00 cuando se pulsa MENU en el mando a distan-

cia. Utilice esta función para sincronizar el reloj con la

hora correcta.

AJUSTE DEL RELOJ

T7205ES.QX33 01.3.19 10:27 AM Page 37

- 38 - ES

1B15

MEMO

T7205ES.QX33 01.3.19 10:27 AM Page 38

- 39 - ES

1B15

MEMO

T7205ES.QX33 01.3.19 10:27 AM Page 39

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials

or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded

from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail

purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply

to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product

not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplica-

tion, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this

product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-

TIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED

SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHO-

RIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITH-

OUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or for general service procedure,

please call 1-800-968-3429 or write to the following:

FUNAI CORPORATION, INC.

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-968-3429

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in Malaysia 0EMN01834

T7205UF * * * * *

T7205BCV.QX33 01.3.19 10:27 AM Page 40

Sylvania Ssc191 Users Manual T7205.QX33

SSC191 SSC191

SSC191 pdf_14950

SSC191 to the manual 42ddb572-f923-41a1-b495-ad2d660fb4d4

Navigation menu

Versions of this User Manual:

Views

Navigation