Sylvania Ssc509D Users Manual TD002.QX33

SSC509D SSC509D

SSC509D to the manual 6ac45b1c-bf37-4ccb-abdd-772fd8037c20

2015-02-04

: Sylvania Sylvania-Ssc509D-Users-Manual-389607 sylvania-ssc509d-users-manual-389607 sylvania pdf

Open the PDF directly: View PDF .
Page Count: 33

Download
Open PDF In Browser	View PDF

TD002.QX33

03.2.6

16:58

Page 1

OWNER’S
MANUAL

9-INCH COLOR TV/DVD

SSC509D

This Owner’s Manual is made of
recycled paper.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

As an ENERGY STAR ®
Partner, our company has
determined that this product meets
the ENERGY STAR ® guidelines for
energy efficiency. ENERGY STAR ® is
a U.S. registered mark.

If you need additional assistance for set-up or operating after
reading owner’s manual, please call TOLL FREE : 1-800-968-3429.
Or visit our WEB SITE at http://www.funai-corp.com
Please read before using this equipment

TD002.QX33

03.2.6

16:58

Page 2

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.

RISK OF ELECTRIC SHOCK
DO NOT OPEN

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.

CAUTION

The caution marking is located on the rear of the cabinet.

IMPORTANT SAFEGUARDS
1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.

Accessoires- Ne placez pas cette TV/DVD sur une table
roulante, un support, un trépied, une console ou une table
instable. Cette TV/DVD risquerait de tomber, pouvant
gravement blesser quelqu'un et l'appareil même pourrait
être sérieusement endommagé. N'utilisez qu'une table
roulante, un support, un trépied, une console ou une table
recommandé par le fabriquant, ou vendu avec la TV/DVD.
Pour n'importe quelle installation de l'appareil, on devra
suivre les instructions du fabriquant et l'on devra utiliser les
accessoires d'installation recommandés par le fabriquant.
L'ensemble combiné de l'appareil avec une table roulante
devra être déplacé avec précaution. Des arrêts brusques,
une force excessive et des surfaces inégales peuvent provoquer le renversement de l'ensemble combiné de
l'appareil/table roulante.

2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All operating and use instructions
should be followed.
5.Cleaning-Unplug TV/DVD from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments-Do not use attachments not recommended by
the TV/DVD manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this TV/DVD near waterfor example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8.Accessories-Do not place this TV/DVD on an unstable cart,
stand, tripod, bracket, or table. The TV/DVD may fall, causing serious injury to someone, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
TV/DVD. Any mounting of the
PORTABLE CART WARNING
AVERTISSEMENT POUR UNE
appliance should follow the manu- TABLE
ROULANTE PORTATIVE
facturer’s instructions and should use
a mounting accessory recommended
by the manufacturer. An appliance
and cart combination should be
moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the appli- S3126A
ance and cart combination to overturn.

9. Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the TV/DVD and to protect it from overheating, and these openings must not be blocked or covered.
The openings should never be blocked by placing the
TV/DVD on a bed, sofa, rug, or other similar surface. This
TV/DVD should never be placed near or over a radiator or
heat register. This TV/DVD should not be placed in a builtin installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions
have been adhered to.
10.Power Sources-This TV/DVD should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For TV/DVDs intended to operate from battery
power, or other sources, refer to the operating instructions.
11.Grounding or Polarization-This TV/DVD is equipped
with a polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.

–2–

EN
0C28

TD002.QX33

03.2.6

16:58

Page 3

F IGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECT RICAL CODE
ANTE NNA
L EAD I N
WI RE
GROUND
CLAMP

A NTENNA
DI SCHARG E UN I T
(NEC SECTION 8 10 -2 0)

EL ECT RI C
SE RV I CE
EQ U I PM EN T
G RO UNDI NG CO NDUCT ORS
(NEC SECTION 8 10 -2 1)

G RO UND CL AM PS
NEC - NATI O NAL EL ECTRI CAL CO DE

POWER SERVI C E G RO UNDI NG
EL EC TR O DE SYST EM
(NEC ART 2 50 , PART H)

S2 8 9 8 A

12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.

19.Damage Requiring Service-Unplug this TV/DVD from
the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.

13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV/DVD, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements
for the grounding electrode. (Fig. A)
14.Lightning-For added protection for this TV/DVD receiver
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the TV/DVD due to lightning and
power-line surges.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.

b. If liquid has been spilled, or objects have fallen into the
TV/DVD.
c. If the TV/DVD has been exposed to rain or water.
d. If the TV/DVD does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV/DVD to its normal operation.
e. If the TV/DVD has been dropped or damaged in any way.
f. When the TV/DVD exhibits a distinct change in performance-this indicates a need for service.
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other hazards.
21.Safety Check-Upon completion of any service or repairs to
this TV/DVD, ask the service technician to perform routine
safety checks to determine that the TV/DVD is in proper
operating condition.
22.Heat-This TV/DVD product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.

16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on
the TV/DVD.
18.Servicing-Do not attempt to service this TV/DVD yourself
as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.

–3–

EN
0C28

TD002.QX33

03.2.6

16:58

Page 4

PRECAUTIONS
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

LASER SAFETY
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to service this device, due to possible eye injury.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.

RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.

This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable
and can be reused. Please dispose of any materials
in accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.

The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
–4–

EN
0C28

TD002.QX33

03.2.6

16:58

Page 5

LOCATION

SUPPLIED ACCESSORY

For safe operation and satisfactory performance of
your TV/DVD, keep the following in mind when
selecting a place for its installation:
• Shield it from direct sunlight and keep it away from
sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top and bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the TV/DVD near strong magnetic fields.
• Avoid moving TV/DVD to locations where temperature differences are extreme.

• Remote Control Unit
(PART NO.: NE207UD)

AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting

SYMBOLS USED IN THIS MANUAL

•
•
•

• 2 AA Batteries
• Indoor Antenna
(PART NO.:
0EMN00723 or 0EMN01183)
• Matching Adapter
(300ohm-75ohm)
(PART NO.: 1813641 or
1780258 or UCPGANTPK004)
• Car Battery Cord
(PART NO.: WPC0202GA001
or WPC0202HHH01)

The following symbols below appear in some headings and notes in this manual, with the following
meanings

it from an AC wall outlet. Grasp it by the plug.
If, by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Do not put your fingers or objects into the
TV/DVD disc loading tray.
Do not place anything directly on top of the unit.

TV
: Description refers to TV operation (in the TV mode).

DVD-V
: Description refers to playback of DVD video discs
(in the DVD mode).

CD
: Description refers to playback of audio CDs
(in the DVD mode).

WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD
which has moisture, it may damage the DVD and
TV/DVD. Therefore when the condensation occurs
inside the unit, turn POWER on and allow at least 2
hours for the unit to dry out.

MP3
: Description refers to playback of MP3 discs
(in the DVD mode).

QUICK
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).

–5–

EN
0C28

TD002.QX33

03.2.6

16:58

Page 6

TABLE OF CONTENTS
C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2
C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4
C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
C OPERATING CONTROLS AND FUNCTIONS . . .8
INSTALLING THE BATTERIES . . . . . . . . . . .9
C PREPARATION FOR USE . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTIONS . . . . . . .10
INDOOR ANTENNA . . . . . . . . . . . . . . . . . . .10
CONNECTING TO EXTERNAL INPUT JACKS .11
CONNECTING TO A STEREO SYSTEM . . . .12
CONNECTING TO AN AMPLIFIER
EQUIPPED WITH DIGITAL INPUT JACKS,
MD DECK OR DAT DECK (for DVD only) . .12
CONNECTING TO A DOLBY DIGITAL
DECODER (for DVD) . . . . . . . . . . . . . . . . . . .13
TV SECTION
C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .14
CHANNEL SET UP FOR THE FIRST TIME . .14
DELETING (OR ADDING) CHANNEL . . . . .14
CHANNEL SET UP AGAIN . . . . . . . . . . . . . .15
SELECTING THE LANGUAGE . . . . . . . . . . .15
C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .16
WATCHING A TV PROGRAM . . . . . . . . . . . .16
DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .16
PICTURE CONTROL . . . . . . . . . . . . . . . . . . .16
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .17
DVD SECTION
C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .18
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .18
DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .18
C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .19
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .19
GENERAL FEATURES . . . . . . . . . . . . . . . . . .19
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .19
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .19
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
STEP BY STEP PLAYBACK . . . . . . . . . . . . .20
FAST FORWARD/REVERSE SEARCH . . . . .20
SLOW FORWARD / SLOW REVERSE . . . . .20
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .21
TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .21
TITLE / CHAPTER SEARCH . . . . . . . . . . . . .21
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .21
MARKER SETUP SCREEN . . . . . . . . . . . . . .21
C SPECIAL PLAYBACK FUNCTION . . . . . . . .22
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .22
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .22
C PLAYING A MP3 DISC . . . . . . . . . . . . . . . . . .23
MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . .23
TRACK SELECTION . . . . . . . . . . . . . . . . . . .23
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23
C CHANGING THE SETTINGS . . . . . . . . . . . .24
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .24
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .24
STEREO SOUND MODE . . . . . . . . . . . . . . . .24
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .24
BLACK LEVEL SETTING . . . . . . . . . . . . . . .24
VIRTUAL SURROUND . . . . . . . . . . . . . . . . .24
C THE ON-SCREEN INFORMATION . . . . . . .25
C CHANGING THE DVD SETUP ITEMS . . . .26
LANGUAGE SETTING . . . . . . . . . . . . . . . . .26
DISPLAY SETTING . . . . . . . . . . . . . . . . . . . .27
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .27
PARENTAL CONTROL . . . . . . . . . . . . . . . . .28
C TROUBLESHOOTING GUIDE . . . . . . . . . . .29
C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .31
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .31
C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .32
C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

–6–

EN
0C28

TD002.QX33

03.2.6

16:58

Page 7

FEATURES
TV Mode

DVD Mode

• 181 channel capability PLL frequency synthesiz-

¡Dolby Digital sound

This player can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby Digital
decoder.

er tuner with direct station call

(A converter may be necessary to view scrambled
cable channels.)

¡Still/fast/slow/step playback

• Infrared remote control
• Trilingual on screen menu display selectable in

Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.

English, Spanish, or French

¡Random playback for audio CD and MP3

¡Sleep Timer

The Sleep Timer function enables you to shut off the power
without pressing POWER after a desired time period.

This player can shuffle the order of tracks to play them in
random order.
¡Program playback for audio CD and MP3

¡Auto Shut Off Function

If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the TV will turn itself off
automatically.

You can program the order of tracks to play them in any
desired order.
¡DVD menus in a desired language

You can display DVD menus in a desired language, if
available on a DVD.
¡Screen saver/Auto power-off functions

The screen saver program starts when there is no input
from the player for five minutes in the stop mode. When
the screen saver program is activated for 15 minutes, the
power is automatically turned off.
¡Subtitles in a desired language

You can select a desired language for the display subtitles,
if that language is available on a disc.
¡Selecting a camera angle

You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode

You can select the desired audio language and sound mode,
if different languages and modes are available on a disc.
¡Parental lock

You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs

This player automatically detects if the loaded disc is
DVD, audio CD or MP3 on disc.
¡On-screen display

Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡Search
Chapter search / Title search / Track search / Time search
¡Repeat
Chapter / Title / Track / Group / All / A-B
¡Zoom

Magnified screen can be displayed.
¡Marker

The part designated by user can be called back.
¡Resume Play

User can resume to playback from the part at which the
play was stopped.
¡Virtual Surround
¡Bit rate indication
¡DRC (Dynamic range control)

–7–

You can control the range of sound volume.

EN
0C28

TD002.QX33

03.2.6

16:58

Page 8

OPERATING CONTROLS AND FUNCTIONS
[Fig. 1]

TV/DVD FRONT PANEL

[Fig. 3]

TV/DVD REAR VIEW
DC 13.2V

ANT.
L
VIDEO

AUDIO

POWER

VOLUME

STOP

CHANNEL

SKIP

PLAY

SKIP

PAUSE

AUDIO OUT

OPEN/CLOSE HEADPHONE

COAXIAL

1 2

6 7 8 9 10111213 14

POWER PICTURE SELECT

9
11
10

13
34
CH.

VOL.

6
9
+100

+10

SKIP

ZOOM

MUTE

PLAY
REV

DISC
MENU

SLOW

12
ENTER
SETUP

TITLE

RETURN

CLEAR SEARCH MODE REPEAT

A-B

AUDIO

ANGLE

32
31
30
29

MODE

15
24
25

8
33

DISPLAY

23
20
21
22

35
19
18

FWD
STOP

PAUSE

OPEN/
CLOSE

SLEEP

38 39

[Fig. 2]

REMOTE CONTROL

4
36

SUBTITLE

28
27
26

1. Disc loading tray
2. VIDEO input Jack [page 11]
Connect to the video output jack of a video
camera or VCR.
3. AUDIO L/R input Jacks [page 11]
Connect to the audio output jacks of a video
camera or VCR.
4. POWER Button [page 14]
Press to turn the power on and off.
5. VOLUME K/L (VOL. m/n) Buttons
Press to control the volume level for the DVD and TV.

6. CHANNEL K/L (CH.K/L) Buttons [page 14]
Press to select memorized channel.
Press to change to TV mode when DVD mode.
7. Remote Sensor Window
8. STOP Button [page 19]
Stops operation of the disc.
9. SKIP H Button [page 21]
Plays back from the beginning of the current
chapter or track.
SEARCH (REV) E Button (Front Panel)
[page 20]
During playback or in the pause mode, press and
hold button down for a few seconds to change
reverse playback speed.
10. PLAY Button [page 19]
Starts playback of the disc contents.
Press to change to DVD mode when TV mode.
11. SKIP G Button [page 21]
Plays back from the beginning of the next chapter
or track.
SEARCH (FWD) D Button (Front Panel)
[page 20]
During playback or in the pause mode, press and
hold button down for a few seconds to change forward playback speed.
12. PAUSE Button [page 20]
Pauses the current disc operation.
13. OPEN/CLOSE Button [page 19]
Press to insert discs into or remove them from the
tray.
14. HEADPHONE Jack
To connect headphone (not supplied) for personal
listening.

–8–

EN
0C28

TD002.QX33

03.2.6

16:58

Page 9

15. MODE Button [pages 22-24]
Activates program playback or random playback mode
when playing CDs or MP3.
16. Number Button
TV Mode: [page 14]
Press two digits to directly access the desired
channel.
Remember to press a "0" before a single digit
channel.
+100 Button–
Press to select cable channels which are equal or
greater than number 100.
DVD Mode: [page 21]
Press to enter the desired number.
+10 Button–
Press to enter the desired numbers which are
equal or greater than number 10.
17. SLEEP Button [page 17]
Press SLEEP to display the sleep timer and start
the function. The shut off time can be determined
by the number of times you press this button. (0,
30, 60, 90, or 120 minutes)
18. REV h Button [page 20]
Press to view the DVD picture in fast reverse
motion. Press PAUSE, then press this button to begin
slow motion playback. Press this button repeatedly
to change the reverse speed of slow motion.
FWD g Button [page 20]
Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback.
Press this button repeatedly to change the forward
speed of slow motion.
19. ZOOM Button [page 20]
Expands the picture to fill the entire screen.
20. SETUP Button [pages 14, 26-28]
Press to enter or exit the TV menu or DVD setup
mode.
21. TITLE Button [page 19]
Displays the title menu.
22. CLEAR Button [pages 21-23]
Resets a setting.
23. DISPLAY Button
TV Mode:
Press to display the channel number on the
screen. If you press it again, the channel number
will disappear.
DVD Mode: [page 25]
Displays the current status on the TV screen for
checking purposes.
24. SEARCH MODE Button [page 21]
Press to locate a desired point.
25. AUDIO Button [page 24]
Press to select a desired audio language or sound
mode.
26. SUBTITLE Button [page 24]
Press to select a desired subtitle language.
27. REPEAT Button [page 22]
Repeats playback of the current disc, title, chapter
or track.
28. ANGLE Button [page 24]
Press to change the camera angle to see the

sequence being played back from a different angle.
29. REPEAT A-B [page 22]
Repeats playback of a selected section.
30. RETURN Button [page 24]
Returns to the previous operation.
31. ENTER Button [pages 14, 19]
Press to accept a setting.
32. Arrow Buttons
TV Mode: [page 14]
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode: [page 19]
Use when making settings while watching the
display on a TV screen.
33. DISC MENU Button [page 19]
Displays the menus in the DVD.
34. SELECT Button [pages 11, 19]
Press to change to TV mode, external input mode
or DVD mode.
NOTE: When you select the DVD mode by this
button, press PLAY or OPEN/CLOSE first.
Otherwise, the DVD features are not operated.
35. MUTE Button
Press MUTE to turn off the sound
portion of the TV program. (Volume level display
turns LIGHT RED from LIGHT BLUE.) Press
MUTE again or press VOL. m or n to restore
sound.
36. PICTURE Button [page 16]
Press to enter picture adjustment mode.
37. Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect
to a standard AC outlet.
38. AUDIO L/R output Jack
Connect to the analog audio input of an external
amplifier or decoder.
39. COAXIAL digital audio out Jack (DVD Audio
Only)
Connect to the digital input of an external
amplifier or decoder.
40. ANT. in Jack
Connect to an antenna, cable system, or satellite
system.
41. DC 13.2V Jack
Connect to the Car Battery Cord.

INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.

NOTES
¡Do not mix alkaline and manganese batteries.
– 9 –¡Do not mix old and new batteries.

EN
0C28

TD002.QX33

03.2.6

16:58

Page 10

PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
Satellite Box or
OUT
Cable Box
(Not supplied)

VHF/UHF Antenna
(Not supplied)

From Cable System or
Satellite Dish

VHF Antenna
(Not supplied)

UHF Antenna
(Not supplied)

From
Cable System

DC 13.2V

ANT.
L
AUDIO OUT

VHF/UHF

COAXIAL

or Combiner
(Not supplied)

ANT.

or
75-ohm Coaxial
Cable (Not supplied)

Flat twin-lead cable

[Fig. 4]

Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
NOTE:
Before plugging the an antenna into the ANT. IN jack of the TV/DVD, check that
the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin
into the ANT. IN jack of the TV/DVD.

Bent pin
Cable

Plug

(Needs to be straightened)(Straight pin)

VHF/UHF COMBINED ANTENNA

CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITE BOX

A VHF UHF 75 ohm combination antenna can be
connected to ANT terminal.

VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.

CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your TV/DVD without a converter box.
Use the TV/ DVD Remote Control to select channels.

If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown here.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the TV/ DVD Remote Control.
TO VIEW A SCRAMBLED/UNSCRAMBLED
CHANNEL
1.Set the TV/DVD channel selector to the output
channel of the Cable Converter Box or Satellite
Box. (Ex. CH3)
2.Select the channel to view at your Cable Converter
Box or Satellite Box.

INDOOR ANTENNA
The Indoor Antenna (supplied) is detachable. Insert the stem of the antenna into the
hole on the upper-back portion of the TV/DVD. Connect the Indoor Antenna to the
TV/DVD as shown in the diagram. For the best reception, fully extend the Indoor
Antenna and make the necessary adjustments. (Avoid touching the top section when
adjusting.)
NOTE:
The connection of an Indoor antenna may not always give acceptable TV reception.

Indoor Antenna
(Supplied)
Flat twin-lead cable
Matching
Adapter
(Supplied)

DC 13.2V

ANT.
L
AUDIO OUT
R

COAXIAL

ANT.

– 10 –

[Fig. 5]
EN
0C28

TD002.QX33

03.2.6

16:58

Page 11

CONNECTING TO EXTERNAL INPUT JACKS
When you watch a program recorded on an another
source (VCR or video camera), use the audio/video
input jacks on the front of the TV/DVD.
Connect the audio/video output
jacks of another source to the
AUX
AUDIO L/R and VIDEO jacks of
this TV/DVD. Then press SELECT
until "AUX" appears on the screen.
NOTE:
• When you connect a monaural VCR (another
source) to this TV/DVD, connect the Audio output
jack of the monaural VCR (another source) to the
AUDIO L jack of this TV/DVD. The audio will
output in both L and R channel equally.

[Front of the TV/DVD]
VIDEO

AUDIO

POWER

[Another source] To the audio
output jacks

Audio/Video
cables
(not supplied)

VIDEO

AUDIO

etc.
To the video
output jack

[Fig. 6]

MOBILE CONNECTION
WARNING: The driver should never watch the TV/DVD while operating a motor vehicle.
CAUTION:
• When used in moving vehicle, be sure that the unit is secure at all the times to prevent injury.
Consult a professional installer.
• If you use the TV/DVD with the vehicle’s engine off, recharge the vehicle’s battery after about
every 4 hours of use to prevent it from running down. After you finish using the TV/DVD be
sure you unplug the car-battery cord from the cigarette-lighter socket.
• Do not use this TV/DVD while driving.
• Do not leave this TV/DVD in a car.
• This TV/DVD is not designed for use in a car.

1) The supplied indoor antenna is adequate when
your vehicle is stationary. For best reception on
the road, use a high-quality VHF/UHF mobile TV
antenna.
2) Attach the car battery cord to the DC13.2V(12V)
connector on the back of the TV/DVD. Then, connect the other end to your vehicle’s cigarettelighter socket.
To the vehicle's
cigarette-lighter socket
VHF/UHF Combination
Mobile Antenna
(Not supplied)

NOTES:

• Be sure your vehicle has a 13.2-volt (12-volt), neg•
•
•
•
•
•

ative-ground electrical system.
Be sure you use only the supplied car battery cord.
Using another cord could damage the TV/DVD.
Be sure the socket is free of ashes and other debris.
Be sure to push the car battery cord’s plug completely into the cigarette-lighter socket.
Always unplug the car battery from the cigarettelighter socket before you unplug it from the
TV/DVD.
You must disconnect the car battery cord from the
TV/DVD before you can use the AC power.
Be sure to replace the fuse with only the same type,
6A, 250V.

Car battery cord
(Supplied)
ANT.
DC13.2V

DC 13.2V

ANT.
L
AUDIO OUT
R

COAXIAL

– 11 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 12

CONNECTING TO A STEREO SYSTEM
Stereo system

DC 13.2V

L
AUDIO OUT
ANT.
L

AUDIO OUT
R

COAXIAL

To ANALOG AUDIO INPUT jacks
To Right (red) and Left (white)
AUDIO OUT jacks

[Fig. 7]
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the
TV/DVD.
• The monaural sound is output from the stereo system when the TV/DVD is in the TV mode.

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.

Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.

DC 13.2V

L
AUDIO OUT
ANT.
L

AUDIO OUT
R

COAXIAL

To COAXIAL DIGITAL
AUDIO INPUT jack

To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)

[Fig. 8]
NOTES:
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 27 to set DOLBY
DIGITAL to OFF.)

– 12 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 13

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)
If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to
a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality
surround sound as enjoyed in movie theaters.
Use audio coaxial digital cables available at retail for the audio connections.

Front speaker
(left)

Center
speaker

Front speaker
(right)

DC 13.2V

Dolby Digital decoder

To COAXIAL DIGITAL
AUDIO INPUT jack

L
AUDIO OUT
ANT.
L

AUDIO OUT
R

COAXIAL

Surround
speaker
(left)

Surround
speaker
(right)

Subwoofer

To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack

[Fig. 9]

NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
(See page 27 to set DOLBY DIGITAL to ON.)
• Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup
mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the
speakers.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.

– 13 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 14

TV SECTION

SET UP FOR USE
You can program the tuner to scan all the channels you receive in your area.
NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just
select the TV/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3). Then
select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE
FIRST TIME

DELETING (OR ADDING)
CHANNEL

TV
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)

Plug in the TV/DVD power cord

Plug the TV/DVD power cord into a
standard AC outlet.
NOTE:
• If some digits appear in the corner of
the screen, press POWER without
unplugging the power cord.

Press SETUP on the remote control.
Press K or L to point to “CHANNEL SET UP”.
Then, press ENTER.

Turn on the TV/DVD

- TV SETUP -

Select “CHANNEL SET UP”

B CHANNEL SET UP
LANGUAGE [ENGLISH]

Press POWER to turn on the TV/DVD.

2
3

Select the On Screen
Language

– SET UP –
B LANGUAGE
[ENGLISH] ESP

Press K or L to point to “LANGUAGE”.
Then, press ENTER to select
“ENGLISH” or “ESP”=Spanish or
“FRA” =French. “[ ]” indicate the selected language.
FRA

Select “ADD/DELETE CH”

Press K or L to point to
“ADD/DELETE CH”.
Then, press ENTER.

– CHANNEL SET UP –
B ADD / DELETE CH (TV)
AUTO PRESET

AUTO PRESET

Begin auto preset

– SET UP –

Press K or L to point to “AUTO
PRESET”. Then, press ENTER.
The tuner scans and memorizes all
active channels in your area.
NOTES:
• The TV/DVD distinguishes between standard TV
channels and cable(CATV) channels.
• The TV/DVD may memorize TV channels as
CATV channels if reception conditions is poor. If
this happens, try AUTO PRESET action again
when reception conditions are better. See “CHANNEL SET UP AGAIN” on page 15.
LANGUAGE
[ENGLISH] ESP

FRA

Enter the desired channel number

Press K or L until your desired
channel number appears. (You can
also use Number or CH. K/L to
enter it.) (Example: CH8)

08
ADD / DELETE

B AUTO PRESET

Added channel: Light blue.
Deleted channel: Light red.

• To delete another channel, repeat steps [3] and [4].
• If you press ENTER again, the channel is memorized again.

After scanning

The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you can
select the desired channel directly with Number or
CHANNEL(CH.) K or L.

Delete (or add) it from (into) memory

Press ENTER. The channel number changes to light
red. The channel is deleted from memory.

Exit the channel setup mode

Press SETUP on the remote control to returns to TV
mode.
NOTE: To confirm that channel(s) has been deleted
or added, press CHANNEL(CH.) K or L.

– 14 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 15

CHANNEL SET UP AGAIN
TV

Select “CHANNEL SET UP”

Press SETUP on the remote control.
Press K or L to point to “CHANNEL SET UP”.
Then, press ENTER.

Begin auto preset

- TV SETUP -

B CHANNEL SET UP
LANGUAGE [ENGLISH]

– CHANNEL SET UP –

Press K or L to point to “AUTO
PRESET”. Then, press ENTER.
The tuner scans and memorizes all
the active channels in your area.
NOTES:
• The TV/DVD distinguishes between standard TV
channels and cable(CATV) channels.
• The TV/DVD may memorize TV channels as
CATV channels if reception conditions is poor. If
this happens, try AUTO PRESET action again
when reception conditions are better.
ADD / DELETE CH (TV)

B AUTO PRESET

After scanning

The tuner stops on the lowest memorized channel.

SELECTING THE LANGUAGE
TV
NOTE: This function effects only the language on
the screen menu and not the audio source.

Select “LANGUAGE”

Press SETUP on the remote control.
Press K or L to point to “LANGUAGE”.
Then, press ENTER to select
“ENGLISH” or “ESPAÑOL”=
Spanish or “FRANÇAIS”= French.

- TV SETUP -

CHANNEL SET UP
B LANGUAGE [ENGLISH]

Exit the Language mode

Press SETUP on the remote control to return to TV
mode.
NOTE: If Spanish or French is selected accidentally,
1) Press SETUP on the remote control.
2) Press K or L to point to “IDIOMA [ESPAÑOL]”
or “LANGAGE” [FRANÇAIS].
3) Press ENTER to select your desired language.
4) Press SETUP to exit.
– 15 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 16

TV OPERATION
WATCHING A TV PROGRAM

PICTURE CONTROL

TV
The TV/DVD’s picture controls – BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.

Turn on the TV/DVD

Press POWER to turn on the TV/DVD.

Select the channel number

Press CHANNEL(CH.) K or L to select your desired
channel number or press Number on the remote control.
Note for using the Number on the remote control:
¡When selecting cable channels which are higher
than 99, press +100 first, then, press the last two
digits. (Example: to select channel 125, first press
“+100” then press “2” and “5”).
¡You must precede single-digit channel numbers
with a zero (For example: 02, 03, 04 and so on).
Remember:
¡If the TV/DVD is connected to a cable box or
satellite box, the TV/DVD must be on CH3 or
CH4, then the channel to be viewed must be selected on the cable box or satellite box.

Make sure ...
• TV/DVD power must be turned on.

Select “PICTURE CONTROL”

Press PICTURE on the remote control.

Select item you want to adjust

Press K or L until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
BRIGHT

–PPPPPPPCPPPPPPP+

Adjust sound

Press VOLUME(VOL.) X or Y to
adjust the volume.

3
VOLUME

C CC C C C CCCCCCCCCC

NOTE:
• If you press the CHANNEL(CH.) o or p in the
DVD mode, you can change the TV channels.
Even if you turn off the TV/DVD in the DVD
mode, when you turn it on again, it will go into the
TV mode.

Adjust the picture control

Press B or s to adjust to your desired level within
5 seconds.
NOTE:
• At step 3, the picture adjustment display will disappear from the TV screen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step [1].

COLOR

s
to decrease
brightness
to decrease
contrast
to pale

B
to increase
brightness
to increase
contrast
to brilliant

TINT
SHARPNESS

to purple
to soft

to green
to clear

BRIGHT

DEGAUSSING
Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.

CONTRAST

• If there is a power failure of any kind, the unit will
retain its memory for this feature.

– 16 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 17

SLEEP TIMER
TV
The Sleep Timer function enables you to shut off the power
without pressing POWER after a desired time period.

Set “SLEEP TIMER”

Press SLEEP on the remote control.
You may change the sleep time
with pressing SLEEP on the remote
control repeatedly. The timer is set
up to 120 minutes, 30 minutes each
time SLEEP is pressed.

SLEEP 120 MINUTE

To cancel the sleep timer:
Press SLEEP repeatedly until "SLEEP 0 MINUTE"
is displayed.
NOTES:
• When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
• To view the time left for sleep timer press SLEEP
once when SLEEP display disappears. After 10
seconds, display will disappear again.

– 17 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 18

DVD SECTION

ABOUT THE DISCS
PLAYABLE DISCS

DISC TYPES

The following discs can be played back on this TV/DVD.

[DVD]
Data on a DVD is divided into sections called "titles", and
then into subsections called "chapters", each of which is
given a title or chapter number. Playback conditions are
preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If
a function you selected does not run as desired, refer to
the manual accompanying the disc.

¡DVD video

¡DVD-R/RW*

¡DVD+R/RW*

¡Audio CD

¡CD-R/RW*

¡MP3*

* Depending on the types or the writing method of the
medium some discs can not be played.
• Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs
made on personal computers, or on DVD recorders may
not be played back properly due to the factors such as
scratches, dirt or special properties of the disc.
• Discs made on personal computers may not be played
back properly due to the different environment or the
settings of the application you use. We recommend
always to use the standardized, rightly formatted discs.
(Please contact the sales agency for more detail).
This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as
PAL or SECAM.
¡Some discs include region codes as shown below.

Example
Title 1

Title 2

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2

[AUDIO CD]
Data on an audio CD is divided into sections called
“tracks”, each of which is given a track number.

Example
Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

¡The number inside the symbol refers to a region of the

world, and a disc encoded in a specific region format
can only be played back on TV/DVD with the same
region code.
The following discs cannot be played back on this
TV/DVD.
¡DVD with region codes other than 1 or ALL.

[MP3]
Data on an MP3 is divided into sections called "groups",
and then into subsections called "tracks", each of which is
given a group or track number.

¡DVD-ROM
¡DVD-RAM (Never play back, otherwise malfunc-

Example
Group 1

tion may result.)
¡CD-ROM

Track 1

Track 2

Track 3

Group 2
Track 4

Track 1

Track 2

¡VSD
¡CDV (Only plays back the audio part.)
¡CD-G (Only plays back the sound.)
¡CD-I (Never play back, otherwise malfunction

may result.)
¡SACD
¡Photo CD (Never play back, otherwise malfunc-

tion may result.)
¡Video CD (Never play back, otherwise malfunc-

tion may result.)

Any other discs without compatibility indications.

– 18 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 19

PLAYING A DISC
BASIC PLAYBACK
DVD-V

GENERAL FEATURES
CD

Getting started
¡Turn on the power of amplifier and any other com-

ponents, if necessary.

1 Press POWER.
¡The power will turn on.
2 Press OPEN/CLOSE to open disc loading

DVD may contain menus to navigate the disc and
access special features. Press appropriate numerical
key or use Arrow (L/K/B/s) to highlight your selection in the DVD main menu and press ENTER to confirm.
NOTES
¡Select DVD mode by pressing SELECT on the
remote control. Then, press PLAY or OPEN/CLOSE
before you operate the DVD functions.
¡Unless stated, all operations described are based on

remote control use. Some operations can be carried
out using the menu bar on the TV screen.

tray.

3 Place the chosen disc in the tray, with the
label facing up.

DISC MENU
DVD-V
1 Press DISC MENU.
¡The DVD main menu will appear.
2 If the feature is not available,

4 Press PLAY.
¡The tray will close automatically, and playback will

then start from the first chapter or track of the disc.
If the playback does not start automatically, press
PLAY.
¡When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to “TITLE MENU”.

symbol

may appear on the TV screen.

3 If disc menu is available on the disc, audio
language, subtitle options, chapters for the
title and other options will appear for selection.

4 Press Arrow (L/K/B/s) to select an item,
and ENTER to confirm selection.

5 Press STOP to stop playback.

TITLE MENU
NOTES
¡When the DVD mode has been switched to the TV
mode, the DVD mode shuts down first and then TV
picture and sound appears in about 4 seconds.
Similarly, when POWER is pressed to turn off in the
DVD mode, this mode shuts down first and then the
TV/DVD’s power is turned off.
¡A “prohibited icon” may appear at
the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc.
¡With DVDs that use titles for playback program signals, playback may start from the second title, or it
may skip these titles.
¡During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a malfunction.

DVD-V
1 Press TITLE.
¡The title menu will appear.
2 If the feature is not available,

symbol

may appear on the TV screen.

3 Press Arrow (L/K/B/s) to select an item,
and ENTER to confirm selection.

CALLING UP A MENU SCREEN
DURING PLAYBACK
For DVD-Vs
¡Press DISC MENU to call up the DVD menu.
¡Press TITLE to call up the title menu.

NOTE
¡Contents of menus and corresponding menu operations may vary between discs. Refer to the manual
accompanying the disc for details.
EN
– 19 –
0C28

TD002.QX33

03.2.6

16:58

Page 20

SLOW FORWARD /
SLOW REVERSE

RESUME
DVD-V

DVD-V

1 During playback, press STOP.
¡Resume message will appear on the TV screen.

1 During playback, press PAUSE.
2 Press FWD g or REV h.

2 Press PLAY, playback will resume from the

3 Press FWD g or REV h repeatedly to

point at which playback was stopped.
¡To cancel resume, press STOP twice.
¡If turn off the TV/DVD, resume function will be

select the required speed: 1/16, 1/8, 1/2 of
the normal playback.

cancelled.

4 To return to normal playback, press PLAY.

PAUSE
DVD-V

Note for using buttons on the main unit:
Press PAUSE, then, press and hold down the SKIP G/
SEARCHg or SKIPH /SEARCHh on the
TV/DVD for a few seconds to begin Search in 1/16
speed of the normal playback. Press and hold down
again to change speed to 1/8. Repeat this procedure to
change to 1/2.

1 During playback, press PAUSE.
¡Playback will pause and sound will be muted.
2 To continue playback, press PLAY.

ZOOM

STEP BY STEP PLAYBACK

DVD-V

DVD-V
The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.

1 During playback, press PAUSE.
¡Playback will pause and sound will be muted.

1 Press ZOOM during playback.
¡Playback will continue.

2 The disc goes forward by one frame each
time PAUSE is pressed.

2 Press ZOOM repeatedly to select the

3 To exit step by step playback, press PLAY.

required zoom factor: ZOOM1, ZOOM2,
ZOOM3, or OFF.

FAST FORWARD/REVERSE
SEARCH
DVD-V

3 Use the Arrow (K/ L/s/ B) to move the
zoomed picture across the screen.

MP3

4 To exit zoom mode, press ZOOM to OFF.

1 During playback, press FWD g or REV
h repeatedly to select the required forward
or reverse speed: x2, x8, x50, x100.

¡For audio CDs, the speed is fixed at ×16.
¡For MP3, the speed is fixed at ×8.

NOTES
¡Zooming function does not work while disc menu is
shown.
¡Zooming function is not available on some discs.

2 To return to normal playback, press PLAY.
Note for using buttons on the main unit:
During playback, press and hold down the SKIP G /
SEARCHg or SKIPH /SEARCHh on the
TV/DVD for a few seconds to begin Search in x2
speed. Press and hold down again to change speed to
x8. Repeat this procedure to change to x50 and x100.

– 20 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 21

SEARCH FUNCTION
TRACK SEARCH

TIME SEARCH
CD

DVD-V

There are three ways to begin playback on an Audio
CD at a specific Track.

1 During playback, press SEARCH MODE
three times (CD: twice) to display the Time
Search on the TV screen.

Using Number on the remote control

2 Within 30 seconds, enter a desired disc

1 Press Number to enter the desired Track
number.
¡Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number

time using Number on the remote control.
¡Playback will start at the specified time.
¡Press CLEAR to erase the incorrect input.

(eg. track 3, press 3).
¡To play track 26, press +10, 2, 6.

MARKER SETUP SCREEN
DVD-V

Using SEARCH MODE

1 Press SEARCH MODE.
¡The track search display appears.

Use markers to memorise your favorite places on a
disc.

2 Within 30 seconds, select a desired track
1 Press SEARCH MODE four times (CD: three

number using Number on the remote control.

times) during playback.
¡The display screen and Markers will appear on the

¡For single digits press 0 first.
¡Playback will start at the selected track.

TV screen.

Using SKIP H G
During playback, press SKIP G to move the next
track. Press it repeatedly to skip subsequent tracks.
Press SKIP H to go back to beginning of the current
track. Press it repeatedly to go to the previous tracks.
¡If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the
next track.
NOTE
¡SKIP H G are not available when playback is

2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “- : - - : - -”
appears in the display.

3 When reaches the desired point, press
ENTER.
¡The Title or Track and elapsed playing time will

appear in the TV screen.

4 To return to the Marker later, press SEARCH
MODE four times (CD: three times) during
playback and Arrow (s/ B) to choose the
desired marker, then press ENTER.

TITLE / CHAPTER SEARCH
DVD-V
1 Press SEARCH MODE once for the Chapter
search, twice for the Title search during
playback.
/2

NOTES
¡Opening the disc tray or turning off the power or
select AC at step 2 and press ENTER will erase all
Markers.
¡To clear a marker, using Arrow (s/ B), position the
cursor on to the marker number to be cleared and
press CLEAR.
¡You can mark up to 10 points.

2 Enter the desired chapter/title number using

5 Press SEARCH MODE or RETURN to exit.

Number on the remote control.
¡Playback will start at the selected Chapter or Track.
¡Press CLEAR to erase the incorrect input.
¡For single digits press 0 first.

– 21 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 22

SPECIAL PLAYBACK FUNCTION
REPEAT

PROGRAM

REPEAT is available only during playback.

REPEAT TITLE / CHAPTER
DVD-V
To activate the repeat function, press REPEAT
during playback.
¡The repeat mode changes as described below every

time you press the button.
CHAPTER
(current chapter repeat) (current title repeat)

OFF
(repeat off)

NOTES
¡Repeat Title/Chapter is not available with some
scenes.
¡The REPEAT setting will be cleared when moving
to other title or chapter.

1 In stop mode, press MODE.
¡The PROGRAM screen will appear.
2 Press ▲ or ▼ to select a track, then press
ENTER.
¡Press CLEAR to erase the

TOTAL

most recently entered program.

3 Repeat step 2 until you have selected all the
tracks you want to play in the program.

4 Press PLAY to play the programmed tracks.

REPEAT TRACK
CD
To activate the repeat function, press REPEAT
during playback.
¡The repeat mode changes as described below every

time you press the button.
(current track repeat)

You may determine the order in which tracks will play.

(entire disc repeat)

OFF
(repeat off)

NOTES
¡Repeat setting will be cleared when moving to other
track.
¡Repeat playback does not function during repeat AB playback.

NOTES
¡While the program is being played back, the STOP
works as follows.
¡Press STOP once and then PLAY again, playback
will restart from the point where STOP was pressed.
(Program continued)
¡Press STOP twice and then PLAY again, playback will
restart from the track in the usual way. (Program cleared)
¡Up to 99 programs can be entered.
¡If you like to repeat the current track in the program,
press REPEAT repeatedly until
TRACK appears
during playback. If you like to repeat the entire program press REPEAT repeatedly until
ALL
appears during playback.

RANDOM PLAYBACK

REPEAT A-B
DVD-V

1 Press REPEAT A-B at your chosen starting

This shuffles the playing order of tracks instead of
playback in the sequence.

point.
¡

A- appears briefly on the TV screen.

2 Press REPEAT A-B again at your chosen

1 In stop mode, press MODE twice.
¡RANDOM screen appears.
RANDOM
CD [AUDIO]

end point.
¡

A-B appears briefly on the TV screen, and the
repeat sequence begins.

TOTAL 0:45:55

RANDOM PROGRAM
- - no indication - -

PLAY

3 To exit the sequence, press REPEAT A-B.
2 Press PLAY to start random playback.
NOTES
¡The repeat A-B section can only be set within the cur- NOTE
rent title (for DVDs), or current track (for audio CDs). ¡If you like to repeat the current track in the random
selection, press REPEAT repeatedly until
¡Repeat A-B is not available with some scenes in DVD.
TRACK appears during playback. If you like to
¡To cancel the A point which was set, press CLEAR.
repeat the entire random selection press REPEAT
¡Repeat A-B playback does not function during title,
repeatedly until
ALL appears during playback.
chapter, track or all repeat playback.
EN
– 22 –
0C28

TD002.QX33

03.2.6

16:58

Page 23

PLAYING A MP3 DISC
MP3 PLAYBACK

TRACK SELECTION
MP3

MP3

When a CD with MP3 files is in the TV/DVD, the
MP3 menu will appear on the TV screen in stop mode.

1 Press SEARCH MODE during playback.
¡The FILE LIST will appear.

1 In stop mode, press Arrow (K/L) to select

2 Select a desired track using Arrow
(K/L/s/B).

the desired group track.
¡If a group is selected, press B

or ENTER to go on to the
track selection screen. Press
Arrow (K/L) to choose a
track, then press ENTER.
¡If a track is selected, press
ENTER to start playing
tracks. Starting from the one you’ve just chosen the
subsequent tracks will be played.
¡Choose FIRST PLAY to start playback from the
beginning of the listed tracks.
¡Press TITLE to return to the first item.

¡Press B when you want to go to the next hierarchy.
¡Press s when you want to go back to the previous

hierarchy.

3 Press PLAY to start playback.
NOTES
¡Press SEARCH MODE to exit.
¡Some selections may take a while to be recognized.

PROGRAM
MP3

2 Press STOP to stop playback.
NOTES
¡Folders are known as Groups; files are known as
Tracks.
¡MP3 files are accompanied by 3 icon.
¡Maximum of 255 folders can
be recognized.
¡Maximum of 256 files can be recognized.
¡Up to 8 hierarchies can be created.
This player recommends the use of files recorded at
the below specifications:
¡Sampling frequency: 44.1kHz or 48kHz
¡Constant bit rate: 112kbps ~ 320kbps.

This feature allows you to program an MP3 disc to
play in a desired sequence.

1 In stop mode, press MODE.
¡The PROGRAM screen will appear.
2 Select a desired track using Arrow
(K/L/s/B). Then, press ENTER.
¡Press B when you want to go to the next hierarchy.
¡Press s when you want to go back to the previous

hierarchy.
¡Press CLEAR to erase the most recently entered pro-

gram.

3 Repeat step 2 until you have selected all the
Tracks you want to play in the program.

4 Press PLAY to start programmed playback.

RANDOM PLAYBACK
MP3
1 In stop mode, press MODE twice.
¡RANDOM screen appears.
2 Press PLAY to start random playback.

– 23 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 24

CHANGING THE SETTINGS
SUBTITLE LANGUAGE

CAMERA ANGLE

DVD-V

The DVD allows you to select a language for subtitles
during DVD disc (if available) playback.

Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the (
) icon appears on the
screen.

1 Press SUBTITLE during playback.
2 Press SUBTITLE repeatedly to select your
desired subtitle language.
¡The subtitle language will be displayed on the dis-

play bar at the top of the screen.

1 Press ANGLE during playback.
¡The selected angle will be displayed on the display
bar at the top of the screen.

2 Press ANGLE repeatedly to select your

3 To turn off subtitles, press SUBTITLE

desired angle.

repeatedly until OFF appears.

NOTES
¡Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
¡If the desired language is not shown after pressing
SUBTITLE several times, the disc does not have
subtitles in that language.
¡If you choose a Language that has a 3 letter language
code, the code will be displayed every time you
change the Subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead.
(Refer to page 26.)

AUDIO LANGUAGE

BLACK LEVEL SETTING
DVD-V
Adjust the Black Level Settings to make the black
parts of the picture brighter.

1 Press MODE during playback.
ON

2 Press ENTER to switch ON/OFF.
DVD-V

The TV/DVD allows you to select a language during
DVD disc (if multi language available) playback.

ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.

3 Press MODE twice or RETURN to exit.

VIRTUAL SURROUND

1 Press AUDIO during playback.
2 Press AUDIO repeatedly to select your

DVD-V

desired language.

NOTE
¡Pressing AUDIO may not work on some DVDs with
multiple audio languages (e.g. DVDs which allow
audio language setting on the disc menu).

MP3

You can enjoy stereophonic visual space on your existing stereo system.

1 Press MODE twice (CD/MP3: once) during
playback.

STEREO SOUND MODE

OFF

CD
1 Press AUDIO repeatedly during playback to
select between STEREO, L-CH or R-CH.
¡STEREO - both right and left channels are active

2 Press ENTER to set it 1 (Natural effect) or 2
(Emphasized effect) or OFF.

3 Press MODE or RETURN to exit.

(stereo)
NOTE (for CD play only)
L-CH - only left channel is active
¡Virtual Surround will not be effective if the sound
R-CH - only right channel is active
mode is set to something other than STEREO.
NOTE
¡If the Virtual Surround setting is ON, the sound
mode will be fixed to STEREO, and can not be
EN
– 24 –
changed.
0C28

TD002.QX33

03.2.6

16:58

Page 25

THE ON-SCREEN INFORMATION
DVD-V

MP3

You can check the information about the current disc by pressing DISPLAY on the remote control.

For DVD-Vs

For audio CDs

1 Press DISPLAY during playback to show

current Chapter.

the current Track.
¡The elapsed and remaining playing time of the cur-

¡The elapsed and remaining

playing time of the current
chapter will be displayed.

9/49

rent track will be displayed.

0:00:00 -0:00:00

2 Press DISPLAY again to show current Total
2 Press DISPLAY again to show current Title.
¡The elapsed and remaining playing time of the cur-

Track.
¡The elapsed and remaining playing time of the cur-

rent title will be displayed.

rent total track will be displayed.

3 Press DISPLAY again.
¡The BIT RATE and the current repeat setting will be

3 Press DISPLAY again to exit the display.

displayed.
¡If you are playing a dual layered disc, the layer num-

ber will also be displayed (L0: Layer 0 is playing.
L1: Layer 1 is playing).

4 Press DISPLAY again to exit the display.

For MP3
1 Press DISPLAY during playback.
¡The name of the file currently in play will be displayed.

2 Press DISPLAY again to show the track
number, the repeat status, and the playback
status at the top of the screen.
¡

will be displayed when repeat play has been
selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates Disc repeat

3 Press DISPLAY again to exit the display.

– 25 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 26

CHANGING THE DVD SETUP ITEMS
LANGUAGE SETTING
DVD-V
Language options are not available with some discs.

1 Press SETUP twice in STOP mode so that
the DVD SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,

then SETUP twice.

QUICK SETUP
TV MODE
DOLBY DIGITAL

4:3 LETTER BOX
ON

2 Press B to select CUSTOM, then press
ENTER.
¡CUSTOM mode will appear.

3 Press Arrow (s/ B) to select LANGUAGE,
then press ENTER to confirm.

LANGUAGE
AUDIO
SUBTITLE
DISC MENU

ORIGINAL
OFF
ENGLISH

4 Press Arrow (K/ L) to select the next items,
then press ENTER.

AUDIO:
¡Sets the audio language.
SUBTITLE:
¡Sets the subtitle language.
DISC MENU:
¡Sets the language for DVD menu.

5 Press Arrow (K/ L) to select a setting, then
press ENTER.
¡If OTHER is selected on the AUDIO, SUBTITLE or

DISC MENU screen, press four-digit number to
enter the code for the desired language. (Refer to the
language code list below.)
¡Only the languages supported by the disc can be
selected.

6 Press SETUP to exit.
NOTE
¡Language Setting for Audio and Subtitle is not available with some discs. Then use the AUDIO and the
SUBTITLE button. Details are on page 24.

Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish

TO CHANGE THE ON-SCREEN MENUS
You can access the TV SETUP menu by pressing
SETUP from the DVD mode. Refer to “Selecting the
Language” on page 15 to changing the on-screen
menus.
¡In case of selecting from the DVD mode, you cannot
select “CHANNEL SET UP” menu.

Code Language
A-B

Code
L-N

4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767

Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu

5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267

If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Audio or Subtitle language setting on page 24. If
you choose any other languages, ‘---’ will be displayed
instead. (3 letter language code is written in bracket.)

– 26 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 27

DISPLAY SETTING

AUDIO SETTINGS
DVD-V

You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.

1 Press SETUP twice in STOP mode so that
the DVD SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,

Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD
discs.

1 Press SETUP twice in STOP mode so that
the DVD SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,

then SETUP twice.

then SETUP twice.
QUICK SETUP
TV MODE
DOLBY DIGITAL

QUICK SETUP
TV MODE
DOLBY DIGITAL

4:3 LETTER BOX
ON

2 Press B to select CUSTOM, then press
ENTER.
¡CUSTOM mode will appear.

3 Press Arrow (s/ B) to select AUDIO, then
press ENTER to confirm.

3 Press Arrow (s/ B) to select DISPLAY, then
press ENTER to confirm.

AUDIO
DRC
OFF
DOLBY DIGITAL
ON
DOWN SAMPLING ON

DISPLAY
4:3 LETTER BOX
TV MODE
ANGLE ICON
ON
AUTO POWER OFF ON

4 Press Arrow (K/ L) to select the below
items, then press ENTER.

TV MODE: QUICK
¡Press Arrow (K/L) for an item selection, then press
ENTER.
¡Select 4:3 LETTER BOX for a black bars appears
on top and bottom of the screen.
¡Select 4:3 PAN & SCAN for a full height picture
with both sides trimmed.
¡The default setting is 4:3 LETTER BOX.
ANGLE ICON:
¡Press ENTER repeatedly to turn Angle icon ON or
OFF.
¡The default setting is ON.
AUTO POWER OFF:
¡Press ENTER repeatedly to turn Auto Power off ON
or OFF.
¡The default setting is ON and it will turn the
TV/DVD to off automatically after 15 minutes of no
use.

DRC (Dynamic Range Control):
¡To compress the range of sound volume.
¡The default setting is OFF.
DOLBY DIGITAL: QUICK
Set to On when the unit is connected to a Dolby Digital
Decoder.
(ON: Output by Dolby Digital)
(OFF: Convert the Dolby Digital to PCM (2 channel
stereo))
¡The default setting is ON.
DOWN SAMPLING:
¡Set to ON when outputting in 48 kHz.
¡The default setting is ON.
When playing disc with copyright Protection
¡If you select OFF, copyright protection will be activated and sound will be down sampled at 48kHz.

5 Press SETUP to exit.

– 27 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 28

PARENTAL CONTROL
DVD-V

CONTROL LEVELS
¡ALL

Parental Control limits the disc viewing that exceed
your settings. (with a password or playback will stop.)
This feature allows you to prevent discs with alternative scenes from being played by your children.

All parental lock is cancelled.
¡Level 8

DVD software of any grade (adult/general/children)
can be played back.
¡Levels 7 to 2

PARENTAL LEVEL
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s ratings exceed the level you set.

Only DVD software intended for general use and
children can be played back.
¡Level 1

Only DVD software intended for children can be
played back, with those intended for adult and
general use prohibited.

1 Press SETUP twice in STOP mode so that
the QUICK SETUP menu appears.
¡ If the menu does not appear, press PLAY, STOP,

then SETUP twice.

IF YOU FORGET THE PASSWORD
1 Press 4, 7, 3, 7 at step 4. Then enter your

QUICK SETUP
TV MODE
DOLBY DIGITAL

4:3 LETTER BOX
ON

new password.
¡Password will be cleared and parental level will be

set to ALL.

2 Press B to select CUSTOM, then press
ENTER.

2 Proceed the above Steps 5-7 again.

3 Press Arrow (s/B) to select PARENTAL,
then press ENTER.

PARENTAL
PARENTAL LEVEL ALL

4 Enter your four-digit password then press
ENTER.

5 Press Arrow (K/ L) to select PARENTAL
LEVEL, then press ENTER.

6 Press Arrow (K/ L) to select the desired
level.

7 Press SETUP to exit
NOTES
¡When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the
password from the second time onward.
¡To change the password, press Arrow (K/L) to
select CHANGE at step 5, then press ENTER. Enter
the four-digit pass-word, then press ENTER.
¡With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡Record the password in case you forget it.

– 28 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 29

TROUBLESHOOTING GUIDE
If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the
player, consulting the following checklist.
Problem
No power.
The TV/DVD does not respond to
the remote control.

Corrective Action
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote.
• You have to be within 23 feet of the TV/DVD.
• Check if the correct mode is selected. If not switch the mode by
pressing SELECT on the remote control,whichever you need.

TV Mode
Problem
No Picture or Sound

Bars On Screen
Picture Distorted or Blurred
Picture Rolls Vertically
Lines or Streaks in Picture
No Color

Poor Reception on Some Channels
Ghosts in Picture

Weak Picture

Sound OK, Picture Poor

Picture OK, Sound Poor
Different color marks on screen.

Corrective Action
Try
a
new
channel,
if
OK,
then possible station trouble.
•
Make
sure
the
power
is
turned
on.
•
• Press SELECT on the remote control to select TV mode. Then try
other TV feature.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust COLOR control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust CONTRAST & BRIGHT control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to terminal on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust CONTRAST & BRIGHT control.
• Try a new channel, if OK, then possible station trouble.
• Check for local interference.
• Magnetism from nearby appliances and geomagnetism might affect
the color of the TV picture. Move the TV/DVD away from the appliances, the TV/DVD can repair itself automatically. If you want to
repair immediately, unplug the TV/DVD power cord, then plug it in
again 30 minutes or so later.

– 29 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 30

DVD Mode
Problem

Corrective Action
• Connect the video cables firmly.
• Insert a correct video disc that plays on this TV/DVD.
• Press SELECT on the remote control to select DVD mode. Next,
press PLAY or OPEN/CLOSE. Then, try other DVD feature.
• Insert the disc.
Disc cannot be played.
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental lock or change the control level.
• Connect the audio cables firmly.
No sound.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This TV/DVD does not support DTS audio. This is not a malfunction.
No DTS audio is output.
.
• There are some cases where pictures may be slightly distorted, which are not a
Distorted picture
sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
• The selected language is not available for audio or subtitles on the DVD.
does not match the set up
This is not a malfunction
The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera
angles. This is not a malfunction
Audio or subtitle language cannot be • The DVD does not contain audio source or subtitles in the selected
changed
language. This is not a malfunction.
“Prohibited icon” appears on the
• That operation is prohibited by the player or the disc.
screen, prohibiting an operation
This is not a malfunction.
CD sound dropout
• Scratched disc. Replace the disc with unscratched one.
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction

No picture.

NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.

– 30 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 31

MAINTENANCE
CABINET CLEANING

SERVICING

• Wipe the front panel and other exterior surfaces of

• Should your TV/DVD become inoperative, do not

•

the TV/DVD with a soft cloth immersed in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/DVD. Such chemicals
may cause damage and discoloration to the
exposed surfaces.

try to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord, and please call our help line at 1-800968-3429, to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

• If the player still does not perform properly when it is operated while referring to the relevant sections and to
"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult
your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING
• Use discs which have the following logos on them.
(Optical audio digital discs.)
Recordable

ReWritable

• Handle the discs so that fingerprints and dust do

• To clean-off, use a soft cloth.
• Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive cleaning agents.

not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it
is not used.

– 31 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 32

SPECIFICATIONS
GENERAL SPECIFICATIONS
TV
CRT :

9 inch in-line gun,
90˚ deflection tube
Television system:
NTSC-M
TV Standard
Closed caption system: §15.119/FCC
Channel coverage:
VHF:
2 ~ 13
UHF:
14 ~ 69
CATV:
2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System:
181 channel
frequency synthesized
tuning system
Channel access:
Direct access keyboard,
programmable
scan and up/down

ELECTRICAL SPECIFICATIONS
Sound output:

OTHER SPECIFICATIONS
Terminals
Antenna input:
Video input:
Audio L/R input:
Headphone:
Coaxial digital
audio output
(only DVD):
Analog audio L/R
output:
Remote control:
Operating
temperature:
Power requirement :

DVD
Discs:
DVD video, Audio CD
Output signal format: NTSC color
Frequency response
(output jack)
DVD (linear sound): 20 Hz to 22 kHz
(sample rate: 48 kHz)
20 Hz to 44 kHz
(sample rate: 96 kHz)
CD:
20 Hz to 20 kHz
Signal-to-noise ratio
(S/N ratio)(output jack)
CD:
100 dB (EIAJ)
Dynamic range
(output jack)
DVD (linear sound): 85 dB
CD:
84 dB (EIAJ)
Total distortion factor
CD:
0.07% (EIAJ)
Wow and flutter:
Below the measurement
limitation (+/-0.001%
W PEAK) (EIAJ)

2 speakers, 1W, 8 ohm

Power consumption :
(Maximum)
Dimensions:
Weight:

VHF/UHF/CATV
75 ohm unbalanced (F-type)
RCA connector [ 1
RCA connector [ 2
1/8” stereo (3.5 mm)
One pin jack,
500m Vpp (75 ohm)
RCA connector [ 2
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
AC 120V/60Hz
DC 13.2V
AC 55W / DC 60W
H:12-1/4” (311mm)
W:10-7/8” (276mm)
D:12-1/2” (318mm)
17.6 lbs (8.0 kg)

• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will be English.

– 32 –

EN
0C28

TD002.QX33

03.2.6

16:58

Page 33

LIMITED WARRANTY
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or
workmanship as follows:

DURATION:
PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.

LABOR:

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.

LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to
any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED
SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI
AUTHORIZED SERVICE FACILITY.

IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.

ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest SYLVANIA Authorized Service Center or for general service procedure,
please call 1-800-968-3429 or write to the following:
FUNAI CORPORATION, INC.
Customer Service
100 North Street; Teterboro, NJ 07608

Tel :1-800-968-3429
http://www.funai-corp.com
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in Malaysia

0EMN02110
TD002UC ★★★★★

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2003:02:06 17:02:26Z
Modify Date                     : 2005:05:24 17:34:55-07:00
Page Count                      : 33
Creation Date                   : 2003:02:06 17:02:26Z
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : 
Mod Date                        : 2005:05:24 17:34:55-07:00
Metadata Date                   : 2005:05:24 17:34:55-07:00
Creator                         : 
Title                           : TD002.QX33
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools

Sylvania Ssc509D Users Manual TD002.QX33

SSC509D SSC509D

SSC509D to the manual 6ac45b1c-bf37-4ccb-abdd-772fd8037c20

Navigation menu

Versions of this User Manual:

Views

Navigation