Symbol Technologies 2164381 Bluetooth Module User Manual Quick start guide

Download:
Mirror Download [FCC.gov]
Document ID	485375
Application ID	xSi2pihXJdnWNgfW3oQFgg==
Document Description	Quick start guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	150.08kB (1875990 bits)
Date Submitted	2004-11-04 00:00:00
Date Available	2004-11-04 00:00:00
Creation Date	2004-10-17 19:58:12
Producing Software	Mac OS X 10.3.5 Quartz PDFContext
Document Lastmod	2004-10-22 10:16:26
Document Title	Quick start guide
Document Creator	Illustrator

SYM.001.04_
NG/S OSG Poster
75x 33. 75" flat
folds to match
dummy provided
. BLACK
. PANTONE 787
PEBF ,,,,,
§ymbol®
The BrterpriseMobiIityComparry "’
http://www.symlrol.com/narcode
See Product Reference Etude for more information
PUS TIN WORK AREA
Please relerto the LS 3479 Product Relerence Guide Troubleshooting section lorfunher inlormation
JoanneLnanozkiny
1 Tether Plate
2 LED Indicators
3 Scan Window
4 Scan Trigger
No power to scanner
Check battery
Scanner notoaired to host—connected cradle
Parrthe scanner to the cradle (using the
PAIR bar code on the cradle)
End cap not secured correctly
;\
Turn end cap to secure
Cradle not programmed for correct host interface
Check scanner host parameters or
edit options
Interface cable is loose
Scanner notprugramrned
for bar code tyne
;\
Ensure scanner is programmed
to read type of bar code being
scanned
Check for loose cable
connections
If dam is still not transmitting to host it may be necessary to recycle power on the cradle
lllllllllllllll
SET DEFAULTS
lllllllllllllIllllllllllllllllll
UNPAlR/DISCONNECT
%/
MM
llllllIlllllIllllllllllllllllllllll
HlD KEVBOARD EMULATlON
lBM HANDHELD USB
EMAGXXfiosILtm-zsfi
IlllllllIill||llllllllllllllllllllllll
PORT EB
PORT 9B
MnfiidJNF-dsfl-HDW
llllllllll ||llllllllllllllllllllll
IBM PC/AT and IBM PC COMPATlBLE
35:232 Host Types
STANDARD RS-ZSZ
lCL RS-ZSZ
NIXDORF RS-ZSZ MODE A
FUJITSU RS-ZSZ
OPOS/JPOS
Bar code unreadable
Ensure bar code is not defaced:
try scanning test bar code ofsame
bar code type
Paired cradle host communication parameters do not match the host's nararneters
;\
Check cradle host parameters oredrt options
Distance between scanner
and bar code incorrect
Move scanner closer to
or further from bar code
_S.na.n.u.er_Emul.aIion.l:l.msllyp.es\
llllllllllllllllllllllllllllll
SCANNER EMULATION
MWH
IlllllllIllllllllllllllllllllllllIll
SYMBOL WAND
ENABLE CONVERT TO CODE 39
DlSABLE CONVERT TO CODE 39
\—/
_ _
Illlllllllllllllllllllll
SCAN OPTIONS

\ ENTER /
,,,,, PERF
SYM.MI.II4_
NGIS RUG Poster
15 X 33.7 " flat
folds to match
dummy pro vided
. BLACK
. PANTHNE 187
PEHF ,,,,,
PUS T IN WORK AREA
for Low Scanning
ALTERNATE LEFT
AND RIGHT KNEES
©2004 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol resenies the rightto make changes to any productto improve reliability, function, or
design. Symbol does notassume any productliability arising out or, or in connection widt,the
application oruse or any product circuit orapplicadon described herein. No license is granted,
either expressly or by implication, estoppel, or otherwise under any patentright or patent.
covering or relating to any combination, system, apparatus, machine, material, method, or process
in which Symbol products might be used. All implied license exists only lor eguipment. circuits,
and subsystems contained in symbol products. Symbol and the Symbol logo are registered
trademarks ofoimbolTechnologies, inc. other productnames mentioned indtis manual maybe
trademarks or registered trademarks or their respective companies and are hereby
acknowledged.
Symbol Technologies, lnc., one Symbol Plaza, iloltsville, n.v. 11741-1300, htgrdlwwwsymbolcom
Patents
This product may be cmrered in one or more US. and foreign Patents. For patent inrormation go
to: www.symbol.com/patents
Ergonomic Recommendations
caution.- In order to avoid or minimize the potential risk or ergonomic injury lollow the
recommendations below. Consult with your local Health a Salety Manager to ensure diatyou are
adhering to your company's safety programs to prevent employee injury.
- Reduce or eliminate repetitive motion
- Maintain a naturaVneutral position
- Reduce or eliminate excessive lorce
~ Keep objects thatare used lreguendy within easy reach
~ Perlorm tasks at correct heights
~ Reduce oreliminate vibration
- Reduce or eliminate direct pressure
- Provide adjustable workstations
- Provide adeguate clearance
~ Provide a suitable working environment
~ improve work procedures.
Regulatory Information
All symbol devices are designed to be compliantwidt rules and regulations in locations they are
sold and will be labeled as required. Any changes or modilicadons to SymbolTechnologies
eguipment. not expressly approved by Symbol Technologies, could void the user‘s audiorityto
operate the eguipment
Regulatory Information is available in French, ltalian, oerman, Spanish (Spaini, Portuguese,
Japanese, Korean, and simplilied Chinese. Please see Web site:
httpllwwwsymbolcomlmanuals and Ioohoryour specilic product.
Service Information
Refnre ynlr use. the. lrnit, it must he configured to operate in ynllr facility’s
network and run your applications.
Ifyou have a problem running your unitor using your equipment, contact
yourfacility's Technical or Systems Support If there is a problem with the
equipment. they will contactthe Symbol Support Center:
United States 1-800-653-5350 or 1-631-738-2400
Canada 905-629-7226
United Kingdom 0800 328 2424
Asia/Pacific +05-6790-9600
Australia 1-000-672-906
Austria/Usterreich 01-5055794-0
Denmark/Danmark 7020-1710
Finland/Suomi 9 5407 580
France 01-40-96-52-21
Germanv/Deutschland 5074-49020
Italy/Italia 2-484441
Mexico/Mexico 5-520-1835
Netherlands/Nederland 315-271700
Norway/Norge +47 2232 4375
South Africa 11-8095311
Spain/Espafia 91 324 40 00llnside Spain)
+34 91324 40 00 (Outside SDain)
Sweden/Sverige DB 445 29 00
1-800-347-0178 (Inside US)
+1 -954-255-261 0 (Outside US)
Europe/Mid-East Distributor Operations
Contactlocal distributororcall +44 118 945 7380
Latin America Sales Support
For the latestversion ofdtis guide go to: httpd/wwwsymbolcom/manuals.
f? or,
L {Li Fr'
http://www.symlrol.com/Irarcode
AVOID EXTREME
WRIST ANGLES
AVOID BENDING
AVOID REACHING
CountryAppmvaI
Regulatory markings are applied to the device signifying the radio (s) are approved for use in the
following countries: United States, Canada, Australia, Japan a Europe‘.
Please refer to the Symbol Declaration of Conformity (DoCl for details of other country markings. This is
available at httpd/wwasymbolcom/docl.
Hote‘: For 2.sz Products: Europe includes, Austria, Belgium, Czech Republic, Croatia, Cyprus,
Denmark, Estonia, Rnland, France, Germany Greece, Hungary, lceland, lreland, ltaly, Latvia,
Liechtenstein, Lidtuania, Luxembourg, Malta, Nedterlands, Norway, Poland, Portugal, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland anddte United Kingdom.
Radio Modules
The LS 3478 Scanners contain an approved radio module. This module is the Symbol Bluetooth radio
Type: tremor
Bluetootlr Devices
This product is an approved Bluetooth device. BTID:BT(]17M
operation or the device without regulatory approval is illegal.
Power Supply
Use only a Symbolapproved power supply 507140007101 output rated 9 Vdc and minimum 1 A. The
power supply is certified to Enomso with SEN outputs. Use of alternative power supply will invalidate
any approval given to this device and may be dangerous.
FCC/Ell RF Exposure Guidelines
Saratyrnfomrariorr
The device complies with lnternadonally recognised standards covering Specilic Absorption Rate (SARi
related to human exposure to electromagnetic lields from radio devices.
Reducing rrrErrpoaurc - Use Property
it is advisableto usethe device oniyindie normal operating position.
uarrdrrordnovicos:
To comply with FCC RF exposure requirements, this device must be operated in the hand. other operating
configurations should be avoided.
Radio Frequency Interference Requirements
Radio Transmitters rPart rs!
FC we to mow ll:.2:l:f.211llliso“"ttizitlillmlilfis
W'th FCC Standards iiithis device may notcause harmlul interference, and
(1) this device must accept any interference received,
including interlerence that may cause undesired
operation.
FOR HOME OR OFFICE USE
Radio Frequency Interference Requirements — Canada
Radio Tr-mrnitters
This device complies with RSS 210 of Industry & Science Canada. Operation is subjectto the following
two conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interlerence received, including interlerence thatmay cause undesired operation.
Label Marking: The Term “IC:' belore the radio certilicadon only signilies that industry Canada technical
specifications were met
(6
Marking and European Economic Area (EEA)
Bluetooth lorusethroughdie EEA havethefollovving restrictions:
- Maximum radiated transmit power of 10mW El RP in the frequency range 1.400 4.4335 GHz
- Belgium outside usage, the eguipment is restricted to 2.450 4.4335 GHz lreguency range
~ ltaly requires a user license lor outside usage.
Star-mart orcompriancr
Symbol Technologies, lnc., hereby, declares that this device isin compliance with the essential
requirements and other relevant provisions ofoirectivas reset/EC, mas/EEC and 73/23/EEL‘.
declaration of Conformio'es may be ohtairied from htIpJ/www2.symbol.conr/doc/
SmMUse
Low-madivm-high beep Shorthiplilieep 4Ionglowbeaps 4shorthigh baaps
l l I I
Power up Ear code decoded [if Transmission error va battery
decode beeper enabled] detected, data is ignored indication
Short low-high heap High-low heap Long low-high heap
Scanner has paired wnh Scanner has unpaired Unsuccessful pairing
the cradle lrom the cradle attempt
Mamm—
Higlrrlowehighrlow beep High-low heap Long low-high beep
Successful parameter Conect programming
setting seguence performed
lnconectprogramming
seguence or Cancel
bar code scanned
IE!” I' .
Standacdflse
W Green Red
No powerapplied to Bar code successfully
scanner, or scanner is decoded
on and ready to scan
Chiming—USE
Datatransmisslorl
error or scanner malfunction
Green Slow Flash Green FastF/ash Red Hash
Scanner charging in slow
mode (used when Cradle
is powered from use bus)
Scanner charging in rapid
mode (used when Cradle
is powered rrorn external
power supply)
Charging problem
Extended Range Scanning
SYMBUL TECHNOLOGIES, INC {Iii ntlrtri‘il’i‘rirri Hill fii‘i‘l‘ (Ul‘l‘l I’trrr‘t ll/nl)’ lfr’i7l1
Local Contact:
Laser Labels
In accordance with Clause 5, IEC 825 and EN60825,the following
information is provided to the user:
EIIEIJSH HEIEW
CLASSI CLASS I LASER PRODUCT lfllffimw lnm
CLASS 1 LASER LIGHT 1m 1m 1 my.
no uoT STARE luro BEAM mmmegwgw
CLASS 2 LASER PRooUCT 1 nm 1m mo
punish/emu rrrturwrrrriurirro
KLASSE1 KLASSE1 LASEHPRDDUKT
KLASSE1 LASERLVF
SE IKKE IND I STRALEN
KLASSE 1 LASEHFRDDUKT
CLASSEI PRDDITITD AL LASER DI CLASSEI
CLASSE 2 LUCE LASER
NON FISSARE IL RAGEIDPRDDU'ITD
AL LASER DI CLASSE 1
onion I HEDERLAIIII‘
KLASSE1 KLASSE-1 LASERFRDDUKT
KLASSE 2 LASERIJCHT
rrorrrrirecwr I rrorisrt
KLASSE1 LASERPRDDUKT, msser
KLASSE 2 LASERLVS IKKE STIRR run ILVSSTHALEN
NIEI' IN STRAAL STAREN LASERPRDDUKT, KLASSE 1
KLASSE-1 LASERPRDDUKT
FIHHISH ISUDIRI FDR'IIIGU'E I PDII'I'IIGUES
LUDKKA‘I LUDKKAI LASERTUDTE
LUDKKAZ LASERVALD
CLASSE1 FRDDUTD LASER DA CLASSE1
HASSEI LUZDELASEHNADHXARD RAID LUMINDSD
ALATUI-IDTA SADEITA PRDDUTD LASER DA CLASSE !
LUDKKA 2 LASERTUDTE
"leach/mucus SPANISH I ESFAfiDI.
CLASSE1 PRDDUIT LASER DE CLASSEI CLASE1 PRDDUCTD LASER DE LACLASE1
CLASSE 2 LUMIERE LASER CLASE 2 LUZ LASER
IEPASmLERNDNRXHIIENT ND MIRE FIJAMENTE EL HAZ
PRDDUIT LASER DE CLASSEI PRDDUCTD LASER DE LACLASEZ
GERMAN I DEUTSCII SWEDISH I SVENSHA
KLASSE1 LASERPHDDUKT DER KLASSE1 KLASS1 LASERPRDDUKT KLASS‘I
KLASSE I LASERSTRAHLEN KLASS I LASERLJUS S'I1RIIA INTE MDT STRALEN
NICHT DIREKT IN DEN mERSTRAHL LASERPRIJDUKT KLASS 2
scrotum
LASERPRDDUKT DER KLASSE 2
JAPANESE] E|=t=§ earnest/miter!
fill Silb—f—Ilona Ii Italicized:
£2! b—‘lf—dfifil 2 as iflflmfiufi!
dcfieaoemvcht‘eu 2flililcf‘flt
2: b—f—ldd
Laser Devices
Symbol products using lasers comply with US 21CFR1040.10, and
IE0825-1:1993, EN80825-1:1994+A1 1:1998. The laser classification is
marked on one otthe labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose. The following statement is required to comply with US and
international regulations:
Caution: Use of controls, adjustments or performance of procedures other
than those specified herein may resultin hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
Iightsource, such as the sun, the user should avoid staring directlyinto the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Scanner Labeling
eeeee PERF

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d7601327-792a-4923-8fe8-fcd234231840
Producer                        : Mac OS X 10.3.5 Quartz PDFContext
Create Date                     : 2004:10:17 19:58:12-04:00
Modify Date                     : 2004:10:22 10:16:26-04:00
Metadata Date                   : 2004:10:22 10:16:26-04:00
Creator Tool                    : Illustrator
Document ID                     : uuid:30d69f16-e7ed-4514-814e-eca0e79c8c9a
Format                          : application/pdf
Creator                         : Illustrator

EXIF Metadata provided by EXIF.tools