Symbol Technologies 2164436 WLAN Module User Manual 6526102a

Symbol Technologies Inc WLAN Module 6526102a

Contents

User information

© 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability, function, or
design.
Symbol does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any
patent right or patent, covering or relating to any combination, system, apparatus, machine,
material, method, or process in which Symbol products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Symbol products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other
product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Patents
This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;4,758,717; 4,760,248; 4,806,742;
4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183;
5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904;
5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628;
5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361;
5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812;
5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441;
5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679;
5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835;
5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500;
5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064;
5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059;
5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098;
6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483;
6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428;
6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061;
6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119;
6,348,773; 6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478;
D383,124; D391,250;D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035;
D430,158; D430,159; D431,562; D436,104.
Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European
Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713
rev. 06/02
Warranty
(A) Warranty Symbol Technologies (hereafter “Seller”) hardware Products are warranted against defects in workmanship
and materials for a period of twelve (12) months from the date of shipment, unless otherwise provided by Seller in writing,
provided the Product remains unmodified and is operated under normal and proper conditions. Warranty provisions and
durations on software, integrated installed systems, Product modified or designed to meet specific customer specifications
(“Custom Products”), remanufactured products, and reconditioned or upgraded products, shall be as provided in the
applicable Product specification in effect at the time of purchase or in the accompanying software license.
(B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold by Seller for use in the service and maintenance
of Products) are warranted against defects in workmanship and materials for a period of thirty (30) days from the date of
shipment. Spare parts may be new or originate from returned units under the conditions set forth in subsection D below.
(C) Repair of Symbol-branded hardware For repairs on Symbol-branded hardware Products under this Agreement,
including repairs covered by warranty, the repair services provided are warranted against defects in workmanship and
materials on the repaired component of the Product for a period of thirty (30) days from the shipment date of the repaired
Product, or until the end of the original warranty period, whichever is longer.
(D) Product Service Products may be serviced or manufactured with parts, components, or subassemblies that originate
from returned products and that have been tested as meeting applicable specifications for equivalent new material and
Products. The sole obligation of Seller for defective hardware Products is limited to repair or replacement (at Seller’s option)
on a “return to service depot” basis with prior Seller authorization. Customer is responsible for shipment to the Seller and
assumes all costs and risks associated with this transportation; return shipment to the Customer will be at Seller's expense.
Customer shall be responsible for return shipment charges for product returned where Seller determines there is no defect
(“No Defect Found”), or for product returned that Seller determines is not eligible for warranty repair. No charge will be made
to Buyer for replacement parts for warranty repairs. Seller is not responsible for any damage to or loss of any software
programs, data or removable data storage media, or the restoration or reinstallation of any software programs or data other
than the software, if any, installed by Seller during manufacture of the Product.
(E) Original Warranty Period Except for the warranty applying solely to the repaired component arising from a repair
service as provided in Section C above, the aforementioned provisions do not extend the original warranty period of any
Product that had either been repaired or replaced by Seller.
(F) Warranty Provisions The above warranty provisions shall not apply to any Product (i) which has been repaired,
tampered with, altered or modified, except by Seller’s authorized service personnel; (ii) in which the defects or damage to
the Product result from normal wear and tear, misuse, negligence, improper storage, water or other liquids, battery leakage,
use of parts or accessories not approved or supplied by Symbol, or failure to perform operator handling and scheduled
maintenance instructions supplied by Seller; (iii) which has been subjected to unusual physical or electrical stress, abuse, or
accident, or forces or exposure beyond normal use within the specified operational and environmental parameters set forth
in the applicable Product specification; nor shall the above warranty provisions apply to any expendable or consumable
items, such as batteries, supplied with the Product.
EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS WARRANTIES STATED ABOVE, SELLER DISCLAIMS ALL
WARRANTIES ON PRODUCTS FURNISHED HEREUNDER INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR USE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN
DURATION TO THE LIMITED WARRANTY PERIOD. SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES, FOR SUCH PRODUCTS, SOME EXCLUSIONS OR
LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY.
The stated express warranties are in lieu of all obligations or liabilities on the part of Seller for damages, including but not
limited to, special, indirect or consequential damages arising out of or in connection with the use or performance of the
Product or service. Seller’s liability for damages to Buyer or others resulting from the use of any Product or service furnished
hereunder shall in no way exceed the purchase price of said Product or the fair market value of said service, except in
instances of injury to persons or property.
END-USER LICENSE AGREEMENT
• You have acquired a device ("DEVICE") that includes software licensed by Symbol Technologies from
Microsoft Licensing Inc. or its affiliates ("MS"). Those installed software products of MS origin, as
well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE")
are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not
sold. All rights reserved. SOFTWARE includes software already installed on the DEVICE ("DEVICE
Software") and MS software contained on the CD-ROM disk ("Companion CD").
• IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE
DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SYMBOL TECHNOLOGIES FOR
INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE
SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE
YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:
•DEVICE Software. You may use the DEVICE Software as installed on the DEVICE.
•COMPANION CD. A Companion CD is included with your DEVICE, and you may install and use the
Microsoft® ActiveSync® 3.7 component on one (1) or more computers to exchange information with
one (1) or more computing devices that contain a compatible version of the Microsoft® Pocket PC
Software 2002 operating system. For other software component(s) contained on the Companion CD,
you may install and use such components only in accordance with the terms of the printed or online
end user license agreement(s) provided with such component(s). In the absence of an end user
license agreement for particular component(s) of the Companion CD, you may install and use only one
(1) copy of such component(s) on the DEVICE or a single computer with which you use the DEVICE.
•Microsoft® Outlook® 2002. If Microsoft Outlook 2002 is included with your DEVICE, the following
terms apply to your use of Microsoft Outlook 2002: (i) regardless of the information contained in the
"Software Installation and Use" section of the online EULA you may install one (1) copy of Microsoft
Outlook 2002 on one (1) computer to use, exchange data, share data, access and interact with the
DEVICE, and (ii) the EULA for Microsoft Outlook 2002 is between Symbol Technologies and the end
user - not between the PC manufacturer and end user.
•Security Updates/Digital Rights Management. Content providers are using the digital rights
management technology contained in this SOFTWARE ("DRM") to protect the integrity of their content
("Secure Content") so that their intellectual property, including copyright, in such content is not
misappropriated. Portions of this SOFTWARE and third party applications such as media players use
DRM to play Secure Content ("DRM Software"). If the DRM SOFTWARE's security has been
compromised, owners of Secure Content ("Secure Content Owners") may request that MS revoke the
DRM SOFTWARE's right to copy, display and/or play Secure Content. Revocation does not alter the
DRM SOFTWARE's ability to play unprotected content. A list of revoked DRM SOFTWARE is sent to
your computer whenever you download a license for Secure Content from the Internet. You therefore
agree that MS may, in conjunction with such license, also download revocation lists onto your
computer on behalf of Secure Content Owners. MS will not retrieve any personally identifiable
information, or any other information, from your computer by downloading such revocation lists.
Secure Content Owners may also require you to upgrade some of the DRM components in this
SOFTWARE ("DRM Upgrades") before accessing their content. When you attempt to play such
content, MS DRM SOFTWARE will notify you that a DRM Upgrade is required and then ask for your
consent before the DRM Upgrade is downloaded. Third party DRM Software may do the same. If
you decline the upgrade, you will not be able to access content that requires the DRM Upgrade;
however, you will still be able to access unprotected content and Secure Content that does not
require the upgrade.
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
•Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting
recognition component(s), you should
understand that speech and handwriting recognition are inherently statistical processes and that
errors can occur in the component's recognition of your handwriting, and the final conversion into
text. Neither Symbol Technologies nor its suppliers shall be liable for any damages arising out of
errors in the speech and handwriting recognition process.
•Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse
engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity
is expressly permitted by applicable law notwithstanding this limitation.
•Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product.
The DEVICE Software installed in read only memory ("ROM") of the DEVICE may only be used as part
of the DEVICE.
•Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as
multiple translations and/or multiple media versions (e.g., in the user documentation and in the
software). Even if you receive multiple versions of the EULA, you are licensed to use only one (1) copy
of the DEVICE Software.
•NO RENTAL. Except if specifically authorized by Symbol Technologies for leased hardware, you may
not rent, lease, or lend the SOFTWARE.
APPROVED ADDITIONAL TEXT IF THE DEVICE IS LEASED:
•LEASED HARDWARE. In the event that you receive the DEVICE under the terms of a lease from
Symbol Technologies or Symbol Technologies' third-party representative, the following additional
terms shall apply: (i) you may not transfer the SOFTWARE to another user as part of the transfer of
the DEVICE, whether or not a permanent transfer of the SOFTWARE with the DEVICE is otherwise
allowed in this EULA; (ii) your rights with respect to any SOFTWARE upgrades shall be as determined
by the lease you signed for the DEVICE; and (iii) you may not use the SOFTWARE after your lease
terminates, unless you purchase the DEVICE from Symbol Technologies.
•Software Transfer. You may permanently transfer all of your rights under this EULA only as part of
a sale or transfer of the DEVICE, provided you retain no copies, you transfer all of the SOFTWARE
(including all component parts, the media and printed materials, any upgrades, this EULA and, if
applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms of this EULA. If
the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.
•Termination. Without prejudice to any other rights, Symbol Technologies or MS may terminate this
EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy
all copies of the SOFTWARE and all of its component parts.
UPGRADES AND RECOVERY MEDIA.
•DEVICE Software. If the DEVICE Software is provided by Symbol Technologies separate from the
DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is
labeled "For Upgrade Purposes Only" you may install one (1) copy of such DEVICE Software onto the
DEVICE as a replacement copy for the existing DEVICE Software, and use it in accordance with this
EULA.
•COMPANION CD. If any software component(s) is provided by Symbol Technologies separate from
the DEVICE on CD ROM disk(s) or via web download or other means, and labeled "For Upgrade
Purposes Only", you may (i) install and use one (1) copy of such component(s) on the computer(s) you
use to exchange data with the DEVICE as a replacement copy for the existing Companion CD
component(s).
COPYRIGHT. All title and intellectual property rights in and to the SOFTWARE (including but
not limited to any images, photographs, animations, video, audio, music, text and "applets,"
incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the
SOFTWARE, are owned by MS or its suppliers (including Microsoft Corporation). You may not
copy the printed materials accompanying the SOFTWARE. All title and intellectual property
rights in and to the content which may be accessed through use of the SOFTWARE is the
property of the respective content owner and may be protected by applicable copyright or
other intellectual property laws and treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this EULA are reserved by MS and its
suppliers (including Microsoft Corporation).
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export
jurisdiction. You agree to comply with all applicable international and national laws that
apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-
user, end-use and destination restrictions issued by U.S. and other governments. For
additional information, see: http://www.microsoft.com/exporting/.
PRODUCT SUPPORT. Product support for the SOFTWARE is not provided by MS, its parent
corporation, Microsoft Corporation, or their affiliates or subsidiaries. For product support,
please refer to Symbol Technologies support number provided in the documentation for the
DEVICE. Should you have any questions concerning this EULA, or if you desire to contact
Symbol Technologies for any other reason, please refer to the address provided in the
documentation for the DEVICE.
NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE
NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE.
THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR
PARTICULAR JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED
WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE PRINTED MATERIALS.
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to
ensure that you are adhering to your company's safety programs to prevent
employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
For Vehicle installations and use
1. An air bag inflates with great force. DO NOT place objects, including either installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates, serious injury could result.
2. Position your device within easy reach. Be able to access your device without removing your eyes
from the road.
3. Do not take notes or use the device while driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your primary responsibility, driving safely.
Phones/Terminals (placed to ear or used with headset)
To comply with RF safety requirements use the specific belt clip. All other belt clips should
be avoided and may not comply with RF safety requirements. The FCC has granted an
Equipment Authorization for these model phones with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR information on these model phones is
on file with the FCC and can be found under the Display Grant section of http://
www.fcc.gove/oet/fccid.
Cell Phone/ Terminal Warnings
Safety on the Road
When driving a car, driving is your first responsibility. Check the laws and regulations on the
use of wireless phones in the areas where you drive. Always obey them. When using your
wireless device / phone behind the wheel of a car, practice good common sense and
remember the following tips:
1. Give full attention to driving -- driving safely is your first responsibility;
2. Get to know your wireless device and any features such as speed dial and redial. If available, these
features help you to place your call without taking your attention off the road.
3. When available, use a hands free device.
4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.
5. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call
while moving, dial only a few numbers, check the road and your mirrors, then continue.
6. Do not engage in stressful or emotional conversations that may be distracting. Make people you
are talking with aware you are driving and suspend conversations that have the potential to divert
your attention from the road.
7. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2
in Europe) or other local emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless
of any security codes and depending on a network, with or without a SIM card inserted.
8. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-
1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to
do for you.
9. Call roadside assistance or a special non-emergency wireless assistance number when necessary.
If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless number.
10. Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt
of a call on public roads, is not permitted.
11. "The wireless industry reminds you to use your device / phone safely when driving".
Service Information
Before using the unit, it must be configured to operate in the facility’s network and run your
applications. If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the equipment, they will
contact the Symbol Support Center:
For the latest version of this guide go to:
http://www.symbol.com/manuals
United States 1-800-653-5350
1-631-738-2400
Canada 905-629-7226
United Kingdom 0800 328 2424 Asia/Pacific +65-6796-9600
Australia 1-800-672-906 Austria/Österreich 1-505-5794-0
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
France 01-40-96-52-21 Germany/Deutchland 6074-49020
Italy/Italia 2-484441 Mexico/México 5-520-1835
Netherlands/Nederland 315-271700 Norway/Norge +47 2232 4375
South Africa 11-8095311 Spain/España 91 324 40 00
Inside Spain
Sweden/Sverige 84452900 +34 91 324 40 00
Outside Spain
Latin America
Sales Support
1-800-347-0178 Inside US
+1-954-255-2610 Outside US
Europe/Mid-East
Distributor Operations
Contact local distributor or call
+44 118 945 7360
72-65261-02
Revision A — November 2003
MC9000-K/S
Windows® Mobile 2003 Software for Pocket PCs
Licensing, Patent and Regulatory Information
Effect on Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles (including safety systems). Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment that has
been added to your vehicle.
Effect on Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles (including safety systems). Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment that has
been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including either installed or
portable wireless equipment, in the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury
could result.
Safety on Aircraft
You are required to switch OFF mobile phones when on board an aircraft as operation may
be dangerous and illegal.
Pacemakers
It is recommended by pacemaker manufacturers that a minimum of 15cm (6 inches) be
maintained between a handheld wireless phone and a pacemaker to avoid any possible
interference with the pacemaker. These recommendations are consistent with independent
research and recommendations by Wireless Technology Research.
Persons with Pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker
when turned ON
• Should not carry the device in a breast pocket
• Should use the ear furthest from the pacemaker to minimise the potential for
interference.
If you have any reason to suspect that interference is taking place, turn OFF your device
Hearing Aids
The device may interfere with some hearing aids. In the event of interference you may want
to consult your hearing aid supplier to discuss solutions.
Other Medical Devices
The device transmits radio frequency energy and has the potential to interfere with
inadequately protected medical devices. Consult your physician or the manufacturer of the
device to see if the particular device has sufficient protection.
It is good practice to turn OFF the device within a hospital or other medical facility where
sensitive medical equipment is in use. In some countries, this is a legal requirement applying
to all mobile phones and related equipment.
Warning Notices
Please observe all warning notices with regard to the usage of mobile phones.
Potentially Hazardous Atmospheres
You are advised not to use this device at a refuelling point. You are reminded of the need to
observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas
where the air contains chemicals or particles (such as grain, dust, or metal powders) and any
other area where you would normally be advised to turn off your vehicle engine.
Regulatory Information
All Symbol devices are designed to be compliant with rules and regulations in locations they
are sold and will be labeled as required. Any changes or modifications to Symbol
Technologies equipment, not expressly approved by Symbol Technologies, could void the
user's authority to operate the equipment.
Radio Modules
This device contains approved radio modules. These modules are identified below:
• Symbol RLAN (11Mbps DSSS) radio module, Type: 21-64436
• Siemens GSM GPRS MC45 module, or Sierra Wireless EM3420 module
• Symbol Bluetooth Module, Type: 21-64381.
This device incorporates the International Roaming feature (IEEE802.11d) which will
ensure the product operates on the correct channels for the particular country of use.
This device contains the following Bluetooth™ qualified subsystems:
• BTID: B01285
• BTID: B00813
Power Supply
Use only a Symbol-approved power supply output rated 11-16 Vdc and minimum 2A. The
power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous.
Benutzen Sie nur eine Symbol Technologies genehmigt in den Ausgabe: 11-16Vdc und
minimum 2A. Die Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben.
FCC Exposure Guidelines
Safety Information
The device complies with Internationally recognized standards covering Specific Absorption
Rate (SAR) related to human exposure to electromagnetic fields from radio devices.
Reducing RF Influence - Use Properly
It is advisable to use the device only in the normal operating position and it is recommended that
no part of the human body be allowed to come too close to the antenna during operation of the
equipment.
Handheld Devices
This device was tested for typical body-worn operation. A minimum separation distance of 1 cm
must be maintained between this device and the body. The use of third-party belt-clips, holsters,
and similar accessories should not contain metallic components in its assembly. The use of these
accessories that do not satisfy these requirements may not comply with FCC RF exposure
compliance requirements, and should be avoided.
Laser Devices
Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-
1:1994+A11:1996. The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose.
The following statement is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure. Class 2 laser scanners use a low
power, visible light diode. As with any very bright light source, such as the sun, the
user should avoid staring directly into the light beam. Momentary exposure to a Class
2 laser is not known to be harmful.
Scanner Labeling
LASERLICHT - NICHT IN DEN STRAHL BLICKEN.
LASER KLASSE 2
LUMI¨RE LASER -NE PAS REGARDER DANS
LE FAISCEAU APPAREIL  LASER DE CLASSE 2.
CAUTION-LASER LIGHT. DO NOT STARE INTO BEAM.
CLASS 2 LASER PRODUCT 630-680 nM, 1 mW
Laser Labels
In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:
ENGLISH HEBREW
CLASS 1 CLASS 1 LASER PRODUCT
CLASS 2 LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
DANISH / DANSK ITALIAN / ITALIANO
KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE 1 PRODOTTO AL LASER DI CLASSE 1
KLASSE 2 LASERLYF CLASSE 2 LUCE LASER
SE IKKE IND I STRÅLEN NON FISSARE IL RAGGIOPRODOTTO
KLASSE 2 LASERPRODUKT AL LASER DI CLASSE 2
DUTCH / NEDERLANDS NORWEGIAN / NORSK
KLASSE 1 KLASSE-1 LASERPRODUKT KLASSE 1 LASERPRODUKT, KLASSE 1
KLASSE 2 LASERLICHT KLASSE 2 LASERLYS IKKE STIRR INN I LYSSTRÅLEN
NIET IN STRAAL STAREN LASERPRODUKT, KLASSE 2
KLASSE-2 LASERPRODUKT
FINNISH / SUOMI PORTUGUESE / PORTUGUÊS
LUOKKA 1 LUOKKA 1 LASERTUOTE CLASSE 1 PRODUTO LASER DA CLASSE 1
LUOKKA 2 LASERVALO CLASSE 2 LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
ÄLÄ TUIJOTA SÄDETTÄ PRODUTO LASER DA CLASSE 2
LUOKKA 2 LASERTUOTE
FRENCH / FRANÇAIS SPANISH / ESPAÑOL
CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASE 1 PRODUCTO LASER DE LA CLASE 1
CLASSE 2 LUMIERE LASER CLASE 2 LUZ LASER
NE PAS REGARDER LE RAYON FIXEMENT NO MIRE FIJAMENTE EL HAZ
PRODUIT LASER DE CLASSE 2 PRODUCTO LASER DE LA CLASE 2
GERMAN / DEUTCH SWEDISH / SVENSKA
KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASS 1 LASERPRODUKT KLASS 1
KLASSE 2 LASERSTRAHLEN KLASS 2 LASERLJUS STIRRA INTE MOT STRÅLEN
NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT KLASS 2
LASERPRODUKT DER KLASSE 2
Radio Frequency Interference Requirements
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio Transmitters
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Label Marking: The Term “IC:” before the radio certification only signifies that Industry Canada
technical specifications were met.
CE Marking and European Economic Area (EEA)
RLAN's (2.4GHz) for use through the EEA have the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835
GHz
• France, equipment is restricted to 2.4465 -2.4835 GHz frequency range
• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range
• Italy requires a user license for outside usage.
Bluetooth™ for use through the EEA have the following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835
GHz
• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range
• Italy requires a user license for outside usage.
Statement of Compliance
Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/
EEC. Declaration of Conformities may be obtained from: http://www2.symbol.com/doc/
Other Countries
Mexico - Restrict Frequency Range to: 2.450 - 2.4835 GHz.
Israel - Restrict Frequency Range to: 2.418 - 2.457 GHz.
Sri Lanka - Restrict Frequency Range to: 2.400 - 2.430 GHz.
Battery Information
Symbol rechargeable battery packs are designed and constructed to the highest standards
within the industry. However, there are limitations to how long a battery can operate or be
stored before needing replacement. Many factors affect the actual life cycle of a battery pack,
such as heat, cold, harsh environmental conditions and severe drops.When batteries are stored
over six (6) months, some irreversible deterioration in overall battery quality may occur. Store
batteries discharged in a dry, cool place, removed from the equipment to prevent loss of
capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year
or longer, they should be charged and discharged at least once a year. If an electrolyte leakage
is observed, avoid any contact with affected area and properly dispose of the battery. Replace
the battery when a significant loss of run time is detected. Standard warranty period for all
Symbol batteries is 30 days, regardless if the battery was purchased separately or included as
part of the mobile computer or bar code scanner. For more information on Symbol batteries,
please visit: http://mysymbolcare.symbol.com/battery/batbasics1.html.

Navigation menu