Symbol Technologies 4121GPRS Radio data terminal with 3 included radios User Manual

Symbol Technologies Inc Radio data terminal with 3 included radios

Contents

User guide

4121GPRSTerminalPreliminary
DIAD IVTerminal© 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved.Symbol reserves the right to make changes to any product to improve reliability, function, or design.Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Symbol products might be used. An implied license only exists for equipment, circuits, and subsystems contained in Symbol products.Symbol, the Symbol logo, and Spectrum24 are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.Symbol Technologies, Inc.One Symbol PlazaHoltsville, N.Y. 11742-1300http://www.symbol.comPatentsThis product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098; 6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061; 6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119; 6,348,773; 6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250;D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035;D430,158; D430,159; D431,562; D436,104.Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713rev. 06/02Preliminary
1Quick ReferenceIntroductionThe 4121GPRS Terminal is a durable hand-held or vehicle-mount radio data terminal. You can enter data by using the custom keypad, bar code scanner, or a combination of the two. You can transmit data from the terminal immediately by the radio link to a host computer.The main features of this terminal include:• Ergonomic design with illuminated color LCD display•Windows® CE Operating System• Intel XScaleTM application processor technology• Wireless Personal Area Network (WPAN), Wireless Local Area Network (WLAN) and optional Wireless Wide Area Net-work (WWAN) radios• 1-Dimensional scanning capability• Color TFT LCD display• Touch screen• Printing support• IrDA-compliant interface for printing and communications.• Speaker and Microphone • Acoustic Modem and Dialer • Indicator• Power Management• Diagnostics• Application Software Loader• Systems Software Loader• Application Program Interfaces.Preliminary
2DIAD IVTerminalAbout This GuideThis guide provides instructions for the set up and operation of the terminal. The following topics are included:•Accessories on page 2•Parts of the Terminal on page 3•Getting Started on page 3•Charging the Internal Battery on page 4•Operating the Terminal on page 4•Maintaining the Terminal on page 5•Troubleshooting on page 6•Regulatory Information on page 8.AccessoriesThe following optional accessories are available from Symbol Technologies:• Belt Attachment• DIAD IV Depot Charger•Stylus• DIAD IV Vehicle Holder.Preliminary
3Quick ReferenceParts of the TerminalNote: The battery status LED lights only when the battery is charging in the DIAD IV Depot Charger. When the ter-minal is not charging, this LED is application depen-dent.Getting StartedBefore the terminal is used for the first time:1. Remove the protective film covers from the LCD display and battery charging contacts.2. Charge the internal battery using the DIAD IV Depot Charg-er. Before using the terminal for the first time, a full charge cycle is recommended. This can take up to six hours.ExitwindowLCDdisplayScankeysStop completekeyKey state keyEscapekeyDelete keySpeakerKey state indicatorPhotosensorBatterystatus LEDMicrophoneSpace keyBackspace keySoft keycycle keyPreliminary
4DIAD IVTerminalCharging the Internal BatteryThe terminal is shipped with a discharged internal battery. To fully charge the battery before using the terminal for the first time, store the terminal in the DIAD IV Depot Charger for up to six hours. While the battery charges, the battery status LED on the terminal is solid yellow. When the battery is fully charged, the battery status LED turns solid green.Refer to the DIAD IV Depot Charger Quick Reference Guide (p/n 72-59198-xx) for detailed charging information and battery status LED indicators.Operating the TerminalPowering the Terminal On/OffPress any key to power the terminal on. To turn power off, pressA + K + X simultaneously or let the terminal time out.Calibrating the Touch ScreenThe terminal prompts you to calibrate the touch screen when you first power on the terminal or after a cold boot.1. As the screen instructs, carefully press and hold the stylus or your finger tip on the center of each target. Repeat as the tar-get moves around the screen.2. When the calibration is complete, press the Stop Complete key or tap the screen to accept the settings.Preliminary
5Quick ReferenceScanningThe terminal has an integrated scanner which collects data by scanning bar codes.AimingNote: The scanner performs best when it is not exactly per-pendicular to the bar code. To scan bar codes with the terminal:1. Aim the scanner at the bar code.2. Press the scan key. Ensure the red scan beam covers the entire bar code.Maintaining the TerminalThe terminal is factory-sealed and contains no user-serviceable parts. Only qualified Symbol Service Centers should service the terminal. Clean the casing, keyboard, and display window by wiping with a soft cloth. If necessary, use the following Oasis products:• Plasti-Kleen (Oasis part number 2200105656)• Allstar Film Free (Oasis part number 15361).Never use solvents or abrasive cleaners. You may damage the display or keyboard. Never use a pressure hose to clean the unit.Preliminary
6DIAD IVTerminalTroubleshootingProblem Cause SolutionThe terminal does not power on or shuts off suddenly.Battery not charged. Recharge the terminal’s battery us-ing the charger.Cannot see char-acters on display. The terminal’s not powered on. Press any key to power on the ter-minal.Tapping the screen or icons does not activate the correspond-ing feature.LCD screen not aligned correctly. Align the screen (see Calibrating the Touch Screen on page 4).The terminal is not fully charged. The terminal was removed from the depot charger too soon.Reinsert the terminal into the charging bay and allow for full charge.The terminal not charging. The depot charg-er is not on or plugged in.Ensure the depot charger is plugged in and is powered on.The terminal con-tacts are covered or dirty.Clean the terminal contacts and re-move any obstructions.The charger bay pogo pins are damaged.Replace the pogo pins.The terminal is not fully inserted into the charging bay.Ensure the terminal is correctly ori-ented and push the terminal fully into the charging bay.Preliminary
7Quick ReferenceThe terminal does not accept scan input.Unreadable bar code. Ensure the symbol is not defaced.Distance be-tween exit window and bar code is in-correct.Ensure you are within proper scan-ning range.Battery needs re-charging. Recharge the terminal’s battery us-ing the depot charger.Scan exit window or IrDA window may need clean-ing.Clean the windows by wiping with a soft cloth.Problem Cause SolutionPreliminary

Navigation menu