Symbol Technologies CA5090 VoIP Phone with 802.11 a/b/g Radio User Manual
Symbol Technologies Inc VoIP Phone with 802.11 a/b/g Radio
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 826103 |
| Application ID | tZlAWFkPZctTYLzFuEoBgQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 39.38kB (492291 bits) |
| Date Submitted | 2007-08-07 00:00:00 |
| Date Available | 2007-08-07 00:00:00 |
| Creation Date | 2003-05-06 15:03:59 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2007-05-14 15:07:48 |
| Document Title | untitled |
| Document Creator | FrameMaker 7.0 |
This product is covered by one or more patents. For patent information go to: www.symbol.com/patents. Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Symbol pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http:// www.symbol.com/environmental_compliance. Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Symbol al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.symbol.com/environmental_compliance. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. Before use the Pharma Stand must be assembled and the digital imager scanner must be configured to operate in your facility’s network and run your applications. Symbol reserves the right to make changes to any product to improve reliability, function, or design. Service Information © 2007 SYMBOL TECHNOLOGIES, INC. All rights reserved. Waste Electrical and Electronic Equipment (WEEE) For the complete Symbol hardware product warranty statement, go to:: http://www.symbol.com/warranty. Warranty • Provide adequate clearance 72-96711-01 Rev. A - February 2007 English: For EU Customers: All products at the end of their life must be returned to Symbol for recycling. For information on how to return product, please go to: http://www.symbol.com/environmental_compliance. • Provide adjustable workstations CD50 Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment. Only use Symbol approved and UL Listed accessories, battery packs and battery chargers. • Reduce or eliminate direct pressure If you have a problem assembling the stand, operating the digital imager scanner or using your equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Symbol Global Customer Interaction Center. No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Symbol products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Symbol products. Local langauge translations are available at the following website: http://www.symbol.com/services/manuals/. • Reduce or eliminate excessive force • Reduce or eliminate vibration Regulatory Guide All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Caution: • Perform tasks at correct heights For the latest Symbol Global Customer Interaction Center contact information, go to: www.symbol.com/contactsupport. Regulatory Information • Maintain a natural position • Keep objects that are used frequently within easy reach For the latest version of this and all Symbol guides go to: http://www.symbol.com/manuals. • Reduce or eliminate repetitive motion Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.symbol.com/environmental_compliance. Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Symbol zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http:// www.symbol.com/environmental_compliance. Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Symbol'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http:// www.symbol.com/environmental_compliance. Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Symbol al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: http://www.symbol.com/environmental_compliance.. Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Symbol Technologies, Inc. One Symbol Plaza Holtsville, N.Y. 11742-1300 http://www.symbol.com Ergonomic Recommendations Patents Health and Safety Recommendations Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source. This guide is available in local languages, translations can be downloaded from the following website: http://www.symbol.com/ services/manuals/. • Provide a suitable working environment Radio Modules • Improve work procedures. The device contain approved radio module(s). These module(s) are identified below. Symbol 802.11 a/b/g radio card, Model: 21-92955 Country Approvals Regulatory markings are applied to the device signifying the radio (s) are approved for use in the following countries: United States, Canada, Australia, Japan and Europe. Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is available at http:// www2.symbol.com/doc/. Note 1: For 2.4GHz Products: Europe includes, Austria, Belgium, Czech Republic, Croatia, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Note 2: The use of 5GHz RLAN's have varying restrictions of use; please refer to the Symbol Declaration of Conformity (DoC) for details. Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Safety in Hospitals Wireless devices transmit radio frequency energy and may affect medical electrical equipement. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilitlies. These requests are designed to prevent possible interference with sensitive medical equipement. Pacemakers Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers: • Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON • Should not carry the device in a breast pocket • Should use the ear furthest from the pacemaker to minimise the potential for interference. • If you have any reason to suspect that interference is taking place, turn OFF your device Hearing Aids The wireless device may interfere with some hearing aids. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Other Medical Devices Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device. RF Exposure Guidelines Safety Information Reducing RF Exposure - Use Properly It is advisable to use the device only in the normal operating position. International The device complies with Internationally recognised standards covering Specific Absorption Rate (SAR) related to human exposure to electromagnetic fields from radio devices. Handheld Devices Power Supply Radio Frequency Interference Requirements-FCC Use only a Symbol approved power supply 50-14000-148R output rated 12 Vdc and minimum 3.3 A. The power supply is certified to EN60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Batteries For products with user accessible re-chargeable batteries Please follow the local regulations when disposing of re-chargeable batteries. Taiwan - Recycling This device was tested for typical body-worn operation. Use only Symbol tested and approved belt-clips, holsters, and similar accessories to ensure FCC Compliance. The use of third-party beltclips, holsters, and similar accessories may not comply with FCC RF exposure compliance requirements, and should be avoided. • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001. EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. EN60825-1:1994+ A1:2002 +A2:2001 Hearing Aid Compatibility IEC60825-1:1993+A1:1997+A2:2001 This device is marked HAC showing compliance with the applicable requirements of FCC Part 68 and CS03-Part 5. Laser Devices The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations: • Consult the dealer or an experienced radio/TV technician for help. Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Wireless Devices -Countries Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. Scanner Labeling • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Country Roaming Ad-Hoc Operation Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to Indoor Use Only, any other use will make the operation of this device illegal. Frequency of Operation - FCC and IC The use in the UNII (Unlicensed National Information Infractructure) band 1 5150-5250 MHz band is restricted to Indoor Use Only; any other use will make the operation of this device illegal. The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware. Cet appareil numérique de la classe B est conforme à la norme NMB003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area (EEA) The use of 2.4GHz RLANs, for use through the EEA, have the following restrictions: • Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz • France, outside usage is restricted to 2.4 - 2.454 GHz. • Italy requires a user license for outside usage. The use of 5GHz RLAN's has varying restrictions for use within the EEA; please refer to the Symbol Declaration of Conformity (DoC) for details at http://www2.symbol.com/doc/. Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www2.symbol.com/doc/. Other Countries Mexico - Restrict Frequency Range to: 2.450 - 2.4835 GHz. Sri Lanka - Restrict Frequency Range to: 2.400 - 2.430 GHz.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Mode : UseOutlines XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : FrameMaker 7.0 Modify Date : 2007:05:14 15:07:48-04:00 Create Date : 2003:05:06 15:03:59Z Metadata Date : 2007:05:14 15:07:48-04:00 Format : application/pdf Title : untitled Document ID : uuid:0591194b-0a0d-4750-a24e-8c45508c9d73 Instance ID : uuid:d69e76b5-5a56-4ac1-96ba-fca3a9908ab4 Page Count : 2 Creator : FrameMaker 7.0EXIF Metadata provided by EXIF.tools