Symbol Technologies CC4137 User Manual OEMRadio
Symbol Technologies Inc OEMRadio
Users Guide
802.11b OEM
Direct Sequence
Radio Card
Product Picture(s) Here
802.11b OEM
Direct Sequence
Radio Card
© 2001 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability,
function, or design.
Symbol does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which Symbol products might
be used. An implied license exists only for equipment, circuits, and subsystems
contained in Symbol products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc.
Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Patents
This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No. 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805;
4,736,095; 4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532;
4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617;
5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148;
5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162;
5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162;
5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924;
5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081;
5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891;
5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322;
5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810;
5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852;
5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851;
5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500;
5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520;
5,823,812; 5,828,050; 5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617;
5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420;
5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,031,830; 6,036,098;
6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,068,190; 6,082,621;
6,084,528; 6,088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678;
6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426;
6,186,400; 6,188,681; 6,209,788; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647;
6,308,061; 6,250,551; 6,295,031; D305,885; D341,584; D344,501; D359,483; D362,453;
D363,700; D363,918; D370,478; D383,124; D391,250; D405,077; D406,581; D414,171;
D414,172; D418,500; D419,548; D423,468; D424,035; D430,158; D430,159; D431,562;
D436,104.
Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875;
1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832;
France 81/03938; Italy 1,138,713.
rev. 11/01
1
Quick Reference
Regulatory Information
All Symbol devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as
required.
Any changes or modifications to Symbol Technologies equipment,
not expressly approved by Symbol Technologies, could void the
user's authority to operate the equipment.
Applying the Regulatory Country Stamp
A regulatory label is applied to the card.The regulatory label
signifies that the card is approved for use in the following
countries:
For approved countries other than those listed above, a sheet of
adhesive country stamps may be enclosed within the package.
To apply the country stamp:
1. Peel the stamp appropriate to the country where the card
is used.
United States
Canada
Australia
Japan
Europe
Austria Belgium Croatia
Denmark Estonia Finland
France Germany Greece
Iceland Ireland Italy
Liechtenstein Luxembourg Netherlands
Norway Portugal Spain
Sweden Switzerland United Kingdom
2
QRG Title
2. Apply the country stamp on the bottom right-hand corner of
the regulatory label.
For countries that have not received regulatory approval, an
adhesive country stamp is not enclosed. Refer to http://
www.symbol.com/wireless for the latest list of approved countries.
Operation of the device without a regulatory label or the
correct country stamp is illegal.
FCC RF Exposure Guidelines
Handheld Devices:
This device was tested for typical body-worn
operations with the holster providing a minimal spacing
of 2.0 cm from the body to the back of the terminal/
antenna. To maintain compliance with FCC RF exposure
compliance requirements, use only belt-clips, holsters, or similar
accessories that maintain a 2.0 cm separation distance between
the user's body and the back of the terminal, including the
antenna. The use of third-party belt-clips, holsters, and similar
accessories should not contain metallic components in its
assembly. The use of these accessories that do not satisfy these
requirements may not comply with FCC RF exposure compliance
requirements, and should be avoided.
Affix country stamp here.
3
Quick Reference
Remote and Standalone Antenna Configurations
To comply with FCC RF exposure requirements,
antennas that are mounted externally at remote
locations or operating near users at stand-alone
desktop of similar configurations must operate with a minimum
separation distance of 20 cm from all persons.
Wrist Worn Devices:
To comply with FCC RF exposure requirements, this
device must be worn on the user's wrist while it is in
use. Other operating configurations that have not been
tested should be avoided.
Radio Frequency Interference Requirements
Note: For a Class B Device:
Note: This equipment has
been tested and found to
comply with the limits for a
Class B digital device,
pursuant to Part 15 of the
FCC rules. These limits are
designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
4
QRG Title
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for
help.
Note: For a Class A Device: (Note: Symbol devices are normally
Class B)
Note: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
Radio Frequency Interference Requirements - Canada
Devics with integrated radios
This device complies with RSS 210 of Industry & Science Canada.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Marking and European Economic Area (EEA)
RLAN's (2.4GHz) for use through the EEA have the following
restrictions:
5
Quick Reference
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 -2.4835 GHz
• France, equipment is restricted to 2.4465 -2.4835 GHz fre-
quency range
• Belgium outside usage, the equipment is restricted to 2.460
-2.4835 GHz frequency range
• Italy requires a user license for outside usage.
Statement of Compliance for radio devices
Symbol Technologies, Inc., hereby, declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. A Declaration of Conformity
may be obtained from http://www2.symbol.com/doc/
Statement of Compliance for radio devices integrated
into terminals
Symbol Technologies, Inc., hereby, declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC.
Declaration of Conformities may be obtained from http://
www2.symbol.com/doc/
Other Countries
2.4GHz Radio Devices:
Mexico - Restrict Frequency Range of : 2.450 - 2.4835 GHz.
72-12345-01
Revision A— July 2000
Symbol Technologies, Inc. One Symbol Plaza Holtsville, NY 11742-1300
Service Information
Before you use the unit, it must be configured to operate in your facility’s network and
run your applications.
If you have a problem running your unit or using your equipment, contact your
facility’s Technical or Systems Support. If there is a problem with the equipment, they
will contact the Symbol Support Center:
For the latest version of this guide go to:http://www.symbol.com/manuals.
United States11-800-653-5350
1-631-738-2400 Canada 905-629-7226
United Kingdom 0800 328 2424 Asia/Pacific 337-6588
Australia 1-800-672-906 Austria/Österreich 1-505-5794
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
France 01-40-96-52-21 Germany/Deutchland 6074-49020
Italy/Italia 2-484441 Mexico/México 5-520-1835
Netherlands/Nederland 315-271700 Norway/Norge 66810600
South Africa 11-4405668 Spain/España +913244000
Sweden/Sverige 84452900
Latin America
Sales Support 1-800-347-0178 Inside US
+1-561-483-1275 Outside US
Europe/Mid-East
Distributor Operations Contact local distributor or call
+44 208 945 7360
1Customer support is available 24 hours a day, 7 days a week.