Symbol Technologies CS4070 Bluetooth Dongle User Manual

Symbol Technologies Inc Bluetooth Dongle

Users Manual

CS4070 ScannerQuick Reference Guide
2 CS4070 ScannerNo part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Symbol Technologies. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice.The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Symbol Technologies grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Symbol Technologies. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Symbol Technologies. The user agrees to maintain Symbol Technologies’ copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.Symbol Technologies reserves the right to make changes to any software or product to improve reliability, function, or design.Symbol Technologies does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.No license is granted, either expressly or by implication, estoppel, or otherwise under any Symbol Technologies intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Symbol Technologies products.Symbol® is a registered trademark, and The Enterprise Mobility Company is a trademark of Symbol Technologies, Inc. All other trademarks and service marks are proprietary to their respective owners. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners. Symbol Technologies, Inc.One Motorola PlazaHoltsville, New York 11742-1300http://www.motorolasolutions.com
Quick Reference Guide 3IntroductionThe CS4070 Scanner captures and stores bar codes for a variety of uses, and transmits bar code data to a host via USB connection or Bluetooth.This document provides basic instructions for setting up, programming, and using CS4070 scanners. The scanner is available in the following configurations:• CS4070SR - Standard range, cordless Bluetooth• CS4070HC - Healthcare, cordless BluetoothEach scanner includes a micro USB host cable. Cradles are also available for mounting, charging, and host connection.Scanner WindowScan/Add KeyLEDBluetooth Key / LEDDelete KeyBattery Level LEDsBattery Level KeyMicro USB Port
4 CS4070 ScannerCharging Before using the CS4070 for the first time, charge the battery using the micro USB cable or a cradle until all four green charging LEDs light. Charge time is approximately three hours for a fully discharged battery.Charging via USB Host Cable1. Insert the micro USB connector on the cable in the interface port on the scanner.2. Connect the other end of the host cable to a USB port on the host PC, or to a USB power adapter plugged into an AC outlet.
Quick Reference Guide 5Charging via Charging Cradle1. Connect the single-slot or 8-slot charging cradle to power. 2. Insert the CS4070 into a device slot to begin charging.The CS4070 begins charging. The charge status LEDs light to indicate progress. See User Indications on page 12 for charging indications.Refer to the CS4070 Scanner Product Reference Guide for information on accessories.
6 CS4070 ScannerCharging Spare Batteries1. Connect the single-slot cradle or 8-slot spare battery charger to power. 2. Insert the battery into a spare battery slot with the charging contacts facing down, contacting the charging pins in the cradle.The charge LED on the cradle lights to show the charge status.Connecting to a HostBatch ConnectionThe micro USB cable enables communication between the CS4070 and a PC, and charges the battery in the CS4070.See Charging via USB Host Cable on page 4 for connection instructions.Bluetooth ConnectionPairingThe CS4070 supports Serial Port Profile (SPP) and Human Interface Device (HID) protocols. Note To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host.
Quick Reference Guide 7To pair to a Bluetooth-enabled host:1. Press the scan button (+) to wake the scanner.2. Press and hold the Bluetooth button for five seconds. The scanner beeps and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.3. On the host, launch the Bluetooth pairing application and place the application into discover Bluetooth device mode. Refer to the CS4070 Scanner Product Reference Guide for pairing examples.4. Select the CS4070 from the discovered device list. The Bluetooth application may prompt you to scan a PIN it generated, or for you to create and then scan the PIN.5. Scan PIN Entry Bar Codes on page 8 that correspond to the PIN, then scan Enter.The Bluetooth button blinks slowly to indicate that the scanner paired with the host.UnpairingTo unpair the scanner and host, press the Bluetooth button. Upon unpairing, the Bluetooth button stops blinking.Note Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable re-establishes Bluetooth pairing. Note To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host.
8 CS4070 ScannerPIN Entry Bar Codes012345
Quick Reference Guide 96789Enter
10 CS4070 ScannerBluetooth Communication OptionsTo set up the scanner for communication with a host using a standard Bluetooth profile, scan one of the following bar codes.•Bluetooth HID Profile (default): The scanner emulates a keyboard.•Bluetooth Serial Port Profile (SPP):The scanner emulates a serial connection. •Bluetooth SSI Profile: The scanner uses SSI.*Bluetooth HID ProfileBluetooth SPPBluetooth SSI Profile
Quick Reference Guide 11ScanningTo scan a bar code:1. Aim the scanner at the bar code. 2. Press the scan (+) button.3. Ensure the aiming dot is centered on the bar code.The scanner beeps and the LED turns green to indicate a successful decode. See User Indications for beeper and LED definitions.Note The scanner cannot scan bar codes when it is connected to the host via the USB cable.
12 CS4070 ScannerDeleting Bar CodesIn batch mode, to delete a bar code aim the scanner at the bar code and press the delete ( - ) button.User IndicationsNote Bar codes cannot be deleted in Bluetooth mode.Function User Action LED BeeperScan item bar codePress scan (+) buttonFlashing green -> solid greenShort high toneBattery status: Full charge (12 hours in a busy environment)Press battery charge button4 green N/ABattery status: approximately 3/4 charge3 green N/ABattery status:approximately1/2 charge2 green N/ABattery status: approximately1/4 charge1 green N/ADelete bar code Hold delete (-) buttonFlashing amber -> solid amberShort medium toneDelete - item doesn't existFlashing amber -> solid redLong short shortClear All (with Delete and Clear All enabled)Hold delete (-) button (if enabled) 3 seconds past scan timeFlashing amber -> solid amber2 long medium tones
Quick Reference Guide 13USB connection to hostConnect scanner to hostFlashing amber - charging; solid green - chargedLow highData protection toggle (when enabled)Hold both scan (+) and delete (-) buttons for 6 secondsNone -> solid amberShort long shortBluetooth radio enable (discover-able)Hold Bluetooth button for 5 secondsRapidly flashing blue LED Short beepBluetooth radio pairedSlowly flashing blue LED Short low highBluetooth radio out of host rangeBlue LED is off Short high lowBluetooth radio returns to host rangePress any button Slowly flashing blue LED Short low highFunction User Action LED Beeper
14 CS4070 ScannerTransmitting Bar Code Data to HostTransferring Data via USB CableThe BarcodeFile.txt file within the \Scanned Barcodes directory on the scanner stores scanned (batch) bar code data. Connect the scanner to the host via USB cable or the charging cradle and use Windows Explorer to navigate to the scanner. Copy the bar code data file to the host.To clear the bar code data, delete the BarcodeFile.txt file from the scanner, or scan the Clear Data bar code in the Product Reference Guide.Transferring Data via BluetoothWhen the scanner is paired to a host via Bluetooth, data transmits to the host after each scan and is not stored on the scanner unless the scanner moves out of range of the host. In this case, if the scanner does not re-pair with the host within the timeout period, it stores data in a batch file. This data must be manually copied to the host.Note The scanner also supports an autorun feature where you can build an autorun.inf file to automatically copy data to the host upon connection.
Quick Reference Guide 15TroubleshootingProblem Possible SolutionsImager comes on, but scanner does not decode the bar code.Ensure the scanner is programmed to read the type of bar code being scanned.Ensure the symbol is not defaced. Scan other bar codes of the same bar code type. Move scanner closer to or further from bar code.Scanner LED turns solid red for a few seconds.Charge the battery. See Charging on page 4.Scanner does not fully charge. Ensure the scanner is connected to a powered USB hub (5V, 500mA max).Bluetooth LED turns off.Scanner is out of range; move closer to the host and press any button to re-pair with the host.Scanner emits long beeps for 5 seconds when scanning a bar code.Memory is full; download bar code data to the host and clear the memory.
16 CS4070 ScannerRegulatory InformationThis device is approved under Symbol Technologies, Inc.This guide applies to Model Number CS4070.All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: http://www.motorolasolutions.com/supportAny changes or modifications to Symbol equipment, not expressly approved by Symbol, could void the user's authority to operate the equipment.CAUTION: Only use Symbol approved and UL Listed accessories, battery packs and battery chargers.Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry before connecting to an external power source.Declared maximum operating temperature: 40°C.Bluetooth® Wireless Technology This is an approved Bluetooth® product. For more information or to view End Product Listing, please visit https://www.bluetooth.org/tpg/listings.cfmWireless Device Country ApprovalsRegulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe.Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is available at http://www.motorolasolutions.com/doc.Note: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.Operation of the device without regulatory approval is illegal.
Quick Reference Guide 17Health and Safety RecommendationsErgonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury.• Reduce or eliminate repetitive motion• Maintain a natural position• Reduce or eliminate excessive force• Keep objects that are used frequently within easy reach• Perform tasks at correct heights• Reduce or eliminate vibration• Reduce or eliminate direct pressure• Provide adjustable workstations• Provide adequate clearance• Provide a suitable working environment• Improve work procedures.Warnings for Use of Wireless DevicesPlease observe all warning notices with regard to the usage of wireless devices.Safety in AircraftSwitch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight. Safety in HospitalsWireless devices transmit radio frequency energy and may affect medical electrical equipment.Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment.PacemakersPacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research.
18 CS4070 ScannerPersons with Pacemakers:• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.• Should not carry the device in a breast pocket.• Should use the ear furthest from the pacemaker to minimize the potential for interference.• If you have any reason to suspect that interference is taking place, turn OFF your device. Other Medical DevicesPlease consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.RF Exposure Guidelines Safety InformationReducing RF Exposure - Use Properly Only operate the device in accordance with the instructions supplied.InternationalThe device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. For information on "International" human exposure to electromagnetic fields refer to the Declaration of Conformity (DoC) at http://www.motorolasolutions.com/doc.For further information on the safety of RF energy from wireless devices - see http://responsibility.motorolasolutions.com/index.php/downloads/located under Wireless Communications and Health.EuropeHandheld Devices This device was tested for typical body-worn operation. Use only Symbol tested and approved belt-clips, holsters, and similar accessories to ensure EU Compliance.US and CanadaHandheld Devices (that cannot be body worn in a belt clip/holster): To comply with FCC RF exposure requirements, this device must be operated in the hand with a minimum separation distance of 20 cm or more from a person’s body. Other operating configurations should be avoided.Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
Quick Reference Guide 19NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.Laser DevicesLED DevicesFor LED devices which have been evaluated to IEC 62471 and comply with the Exempt Risk Group, no product labeling requirements apply. However, the following statement is required to comply with US and international regulations:LED Compliance Statement:Classified as "EXEMPT RISK GROUP" according to IEC 62471:2006 and EN 62471:2008BatteriesTaiwan - RecyclingEPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.Battery InformationCAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions.Use only Symbol approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:Symbol 83-97300-01 (3.7 Vdc, 950 mAh)Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry.However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.
20 CS4070 ScannerWhen batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half of full charge.Replace the battery when a significant loss of run time is detected.Standard warranty period for all Symbol batteries is 30 days, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Symbol batteries, please visit: http:/mysymbolcare.symbol.com/battery/batbasics1.htmlBattery Safety Guidelines• The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment.• Follow battery usage, storage, and charging guidelines found in the user's guide.• Improper battery use may result in a fire, explosion, or other hazard.• To charge the mobile device battery, the battery and charger temperatures must be between +32 ºF and +104 ºF (0 ºC and +40 ºC).• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact the Global Customer Support Center.• For devices that utilize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF logo or have completed the USB-IF compliance program.• Do not disassemble or open, crush, bend or deform, puncture, or shred.• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, explosion, or other hazard.• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.• Battery usage by children should be supervised.• Please follow local regulations to promptly dispose of used re-chargeable batteries.• Do not dispose of batteries in fire.
Quick Reference Guide 21• Seek medical advice immediately if a battery has been swallowed.• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice.• If you suspect damage to your equipment or battery, contact the Global Customer Support Center support to arrange for inspection.Radio Frequency Interference Requirements- FCCNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for help.Radio Transmitters (Part 15)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
22 CS4070 ScannerRadio Frequency Interference Requirements- CanadaThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Marking and European Economic Area (EEA)Bluetooth® Wireless Technology for use through the EEA has the following restrictions:• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 - 2.4835 GHzStatement of ComplianceSymbol hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity may be obtained from http://www.motorolasolutions.com/doc.Japan (VCCI) - Voluntary Control Council for InterferenceClass B ITE
Quick Reference Guide 23Korea Warning Statement for Class B ITEOther CountriesBrazil (UNWANTED EMISSIONS - ALL PRODUCTS)Regulatory declarations for CS4070 - BRAZILFor more information consult the website www.anatel.gov.brDeclarações Regulamentares para CS4070 - BrazilNota: A marca de certificação se aplica ao Transceptor, modelo CS4070. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.brEste equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução n°242/2000 e atende aos requisitos técnicos aplicados, incluindo os limites de exposição da Taxa de Absorção Específica referente a campos elétricos, magnéticos e eletromagnéticos de radiofrequência, de acordo com as Resoluções n° 303/2002 e 533/2009.Este dispositivo está em conformidade com as diretrizes de exposição à radiofrequência quando posicionado pelo menos 20 centímetros de distância do corpo. Para maiores informações, consulte o site da Anatel.ChileEste equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnéticas.기 종 별 사 용 자 안 내 문B급 기기( 가정용 방송통신기자재 )이 기기는 가정용 (B 급 ) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며 , 모든 지역에서 사용할 수 있습니다 .
24 CS4070 ScannerChina通过访问以下网址可下载当地语言支持的产品说明书http://www.motorolasolutions.com/CN-ZH/Pages/Contact_Us#support_tabMexicoRestrict Frequency Range to: 2.450 – 2.4835 GHz.La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.S. KoreaFor a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expression should be displayed:무선설비는 운용 중 전파혼신 가능성이 있음당해 무선설비 는전파혼 신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .Taiwan 臺灣低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。減少電磁波影響，請妥適使用SAR 標準值 2.0W/kg ；送測產品實測值為：0.08W/kgTurkeyBu cihaz Türkçe karakterlerin tamamını ihtiva eden ETSI TS 123.038 V8.0.0 (veya sonraki sürümün kodu) ve ETSI TS 123.040 V8.1.0 (veya sonraki sürümün kodu) teknik özelliklerine uygundur.
Quick Reference Guide 25UkraineДане обладнання відповідає вимогам технічного регламенту №1057, № 2008 на обмеження щодо використання деяких небезпечних речовин в електричних та електронних пристроях.Thailand  .Waste Electrical and Electronic Equipment (WEEE)English: For EU Customers: All products at the end of their life must be returned to Symbol for recycling. For information on how to return product, please go to: http://www.motorolasolutions.com/recycling/weee.Български: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат на Symbol за рециклиране. За информация относно връщането на продукти, моля отидете на адрес: http://www.motorolasolutions.com/recycling/weee.Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skončení jejich životnosti vrátit společnosti Symbol k recyklaci. Informace o způsobu vrácení produktu najdete na webové stránce: http://www.motorolasolutions.com/recycling/weee.Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til recirkulering, når de er udtjent. Læs oplysningerne om returnering af produkter på: http://www.motorolasolutions.com/recycling/weee.Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Symbol zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://www.motorolasolutions.com/recycling/weee.Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Symbol'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.motorolasolutions.com/recycling/weee.Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Symbol al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite: http://www.motorolasolutions.com/recycling/weee.
26 CS4070 ScannerΕλληνικά : Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να επιστρ έφονται στην Symbol για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή ενός π ροϊόντος, επισκεφθείτε τη διεύθυνση http://www.motorolasolutions.com/recycling/weee στο Διαδίκτυο.Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à Symbol pour recyclage. Pour de plus amples informations sur le retour de produits, consultez : http://www.motorolasolutions.com/recycling/weee.Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere restituiti a Symbol al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito Web: http://www.motorolasolutions.com/recycling/weee.Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Symbol“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.motorolasolutions.com/recycling/weee.Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Symbol otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Symbol, lūdzu, skatiet: http://www.motorolasolutions.com/recycling/weee.Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Symbol vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://www.motorolasolutions.com/recycling/weee weboldalra.Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Symbol għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur: http://www.motorolasolutions.com/recycling/weee.Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Symbol te worden teruggezonden voor recycling. Raadpleeg http://www.motorolasolutions.com/recycling/weee voor meer informatie over het terugzenden van producten.Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Symbol para reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.motorolasolutions.com/recycling/weee.Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie returnate la Symbol pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi: http://www.motorolasolutions.com/recycling/weee.Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Symbol za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.motorolasolutions.com/recycling/weee.
Quick Reference Guide 27Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Symbol-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.motorolasolutions.com/recycling/weee.Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Symbol för återvinning. Information om hur du returnerar produkten finns på http://www.motorolasolutions.com/recycling/weee.Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Symbol'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://www.motorolasolutions.com/recycle/weeeTURKISH WEEE Statement of ComplianceEEE Yönetmeliğine UygundurChina RoHSThis table was created to comply with China RoHS requirements.O： 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。X： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。对销售之日的所售产品，本表表示，公司供应链的电子信息产品可能包含这些物质。注意：在所售产品中可能会也可能不会含有所有所列的部件。部件名称 (Parts) 有毒有害物质或元素 铅(Pb)汞(Hg)镉(Cd)六价铬(Cr6+)多溴联苯(PBB)多溴二苯醚(PBDE)金属部件 (Metal Parts)OOOOO O电路模块 (Circuit Modules)XOOOO O电缆及电缆组件 (Cables and Cable Assemblies)OOOOO O塑料和聚合物部件(Plastic and Polymeric Parts)OOOOO O光学和光学组件 (Optics and Optical Components)OOOOO O电池 (Batteries)OOOOO O•5
If you have a problem using the equipment, contact your facility’s technical or systems support. If there is a problem with the equipment, they will contact the Global Customer Support Center at: www.motorolasolutions.com/supportFor the latest version of this guide go to: www.motorolasolutions.com/supportWarrantyFor the complete hardware product warranty statement, go to: http://www.motorolasolutions.com/warranty.For Australia Only:This warranty is given by Motorola Solutions Australia Pty Limited (ABN 16 004 742 312) of Tally Ho Business Park, 10 Wesley Court. Burwood East, Victoria. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Motorola Solutions Australia’s limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Motorola Solutions Australia at 1800 457 439. You may also visit our website: http://www.motorolasolutions.com/Business/XA-EN/Pages/Contact_Us for the most updated warranty terms.Service InformationSymbol Technologies, Inc.One Motorola PlazaHoltsville, New York 11742, USA1-800-927-9626http://www.motorolasolutions.comSymbol® is a registered trademark, and The Enterprise Mobility Company is a trademark of Symbol Technologies, Inc. All other trademarks and service marks are proprietary to their respective owners. © 2014 Symbol Technologies, Inc. All Rights Reserved.MN000763A01 Revision A - July 2014

Navigation menu