Symbol Technologies LA5127C1 802.11b/g Compact Flash Radio Card User Manual LA 5127 User Guide FCC FINAL

Download:
Mirror Download [FCC.gov]
Document ID	759782
Application ID	2f5nvnL6kzUHN5IcMgMdRg==
Document Description	User manual rev
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.1kB (276236 bits)
Date Submitted	2007-02-15 00:00:00
Date Available	2007-02-15 00:00:00
Creation Date	2007-02-15 18:23:28
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-02-15 10:36:39
Document Title	Microsoft Word - LA-5127_User_Guide-FCC-FINAL.DOC
Document Creator	PScript5.dll Version 5.2
Document Author:	A00020946

LA-5127 Integration Guide
USA – FCC
15th Feb 2007
LA-5127 User Guide -FCC
Copyright 2006 Symbol Technologies, Inc.
Page 1 of 13
XXXXXXXXXX Rev X
Table of Contents
1.
2.
INTRODUCTION
1.1
BACKGROUND
1.2
PART NUMBERS
1.3
KEY FEATURES AND STANDARDS SUPPORTED
1.4
USER PROFILES
HARDWARE
2.1
WINCE CARD CONFIGURATION:
REGULATORY
4.1
FINAL PRODUCT COMPLIANCE
4.2
REGULATORY STANDARDS
4.3
REGULATORY APPROVALS
4.3.1
USA Release
4.4
REFERENCE ANTENNA (APPLICABLE TO CONNECTOR VERSION CARD)
4.5
RADIO CARD REGULATORY MARKINGS
4.6
NATIONAL COUNTRY REQUIREMENTS
4.6.1
4.7
United States of America
STATEMENTS REQUIRED FOR THE USER GUIDE
4.7.1
4.7.2
5.
Introduction
Card Dimensions
Operating Channels
Electrical Interface
WINCE SOFTWARE SUPPORT
3.1
4.
HARDWARE ENVIRONMENT
2.1.1
2.1.2
2.1.3
2.1.4
3.
General Statements
FCC Statements
APPENDIX 2: PRODUCT MECHANICAL INTERFACE DRAWING
10
10
10
12
LA-5127 User Guide – FCC
Copyright 2006 Symbol Technologies, Inc.
Page 2 of 13
XXXXXXXX Rev X
1. Introduction
1.1 Background
LA-5127 is the next generation CF client card for embedded solutions and is
intended for OEM customers.
1.2 Part Numbers
LA-5127 CF card will come in one SKU:
Part Number
LA-5127-1002
SKU
External Antenna Version
1.3 Key Features and Standards supported
LA-5127 CF Card supports all required modes of operation as an 802.11g Mobile
Unit (MU). In 802.11g mode, the radio supports three different modulation
modes: Legacy 1 and 2Mbps, Complimentary Code Keying (CCK), and
Orthogonal Frequency Division Multiplexing (OFDM). The radio supports the
following 12 data rates in 802.11b/g mode:
Data Rate (Mbps)
5.5
11
12
18
24
36
48
54
Modulation
DBPSK
DQPSK
CCK
OFDM with BPSK Carrier Modulation
OFDM with BPSK Carrier Modulation
CCK
OFDM with QPSK Carrier Modulation
OFDM with QPSK Carrier Modulation
OFDM with 16QAM Carrier Modulation
OFDM with 16QAM Carrier Modulation
OFDM with 64QAM Carrier Modulation
OFDM with 64QAM Carrier Modulation
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 3 of 13
XXXXXXXX Rev X
1.4 User Profiles
•
The LA-5127 product is optimized for embedded, mobile enterprise and industrial
applications where security, feature and technical service are required.
•
Mobile workers in healthcare, education, retail, manufacturing, hospitality and
other industries with 802.11b, and 802.11g wireless LAN access.
•
Corporate Symbol device users with Wi-Fi wireless LAN access at the office, or
with a subscription to a public wireless LAN.
2. Hardware
2.1 Hardware Environment
2.1.1 Introduction
LA-5127 CF card can be used in handheld mobile devices to provide wireless
network access. LA-5127 communicates using Radio Frequencies (RF) between
two or more users or between a user and the wired network. The module
implements the IEEE802.11g physical (RF) specification. The chipset used
provides for modulation, demodulation, spreading and despreading of the RF
signals.
2.1.2 Card Dimensions
LA-5127 is a modified type I CFA card. See Appendix 2 for Mechanical Interface
Drawing.
2.1.3 Operating Channels
Channel
Number
10
Countries
Channel
Frequency
(MHz)
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457
USA, Canada, EU, Japan
USA, Canada, EU, Japan
USA, Canada, EU, Japan
USA, Canada, EU, Japan
USA, Canada, EU, Japan
USA, Canada, EU, Japan
USA, Canada, EU, Japan
USA, Canada, EU, Japan
USA, Canada, EU, Japan
USA, Canada, EU, Japan
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 4 of 13
XXXXXXXX Rev X
11
12
13
14
2462
2467
2472
2484
USA, Canada, EU, Japan
EU, Japan
EU, Japan
Japan
Table 1. IEEE 802.11g Channels
2.1.4 Electrical Interface
The electrical interface for LA-5127 is PC16. The chipset used supports this
interface; therefore no external component is required. The host must support the
PC16 interface as well. The card uses only the 16-bit interface.
3. WinCE Software Support
Driver support for the 5127 radio is available for Windows CE Embedded 5.0.
3.1 WinCE Card Configuration:
Device configuration is made using a built-in Microsoft OS WLAN configuration
service (i.e. a utility) commonly known as Wireless Zero Configuration (WCZ).
WZC allows a wireless device to connect to an existing wireless network, change
wireless network connection settings, configure a new wireless network
connection, and specify preferred wireless networks. WZC will also notify the
user when new wireless networks are available. Once a desired wireless
network is selected, WZC will automatically configure the wireless card to match
the setting of the network and will attempt a network connection.
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 5 of 13
XXXXXXXX Rev X
4. Regulatory
Legal Disclaimer: This Guide may contain information on regulatory matters. The
information should be used with the understanding that Symbol is not engaged in
rendering any legal, regulatory or other professional opinion. Each country has
specific laws and regulations governing the use of radio communications. Please
consult the official code for each country of interest. Symbol does not warrant
the accuracy of the information contained herein and accepts no liability or
responsibility for any use or misuse of the information
Symbol’s wireless network devices are designed to be compliant with rules and
regulations in locations they are sold.
Any changes or modifications to Symbol Technologies equipment, not expressly
approved by Symbol Technologies, could void the user’s authority to operate the
equipment.
The OEM integrator must NOT provide information in the user guide of the
end product regarding how to install or remove this RF module.
4.1 Final Product Compliance
The model number used for Regulatory Approvals is LA-5127C1
The LA-5127 has been regulatory approved for OEM integrations which meet the
following conditions:
1. The radio integration is embedded
2. The antenna must be installed such that 20 cm is maintained between the
antenna and users
3. The ‘Type’ and ‘Gain’ of the antenna selected for the integration of the
external antenna must meet the requirements as detailed in section 8.
Used outside of these conditions will trigger re-approval. Symbol advises the use
of an accredited test laboratory for advice. Be prepared, the certification process
for your product may take from a few weeks to several months.
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 6 of 13
XXXXXXXX Rev X
AS THE INTEGRATOR, YOU ARE RESPONSIBLE TO DETERMINE WHAT
ADDITIONAL SPECIFIC REGULATORY REQUIREMENTS ARE REQUIRED
OF THE COUNTRY IN WHICH YOUR PRODUCT WILL BE MARKETED.
FINAL PRODUCT MAY REQUIRE NON-RADIO FREQUENCY APPROVALS
SUCH AS PRODUCT SAFETY, EMC, AND SAR.
4.2 Regulatory Standards
LA-5127 has been approved to comply with the standards listed below
Electrical Safety:
Certified to UL / cUL 60950-1, IEC / EN60950-1
RF
USA: FCC Part 15.247, 15.407
EMI/EMS:
North America: FCC Part 15
4.3 Regulatory Approvals
4.3.1 USA Release
USA – North
America
Federal Communications Commission (FCC), US Equipment
Authorization
4.4 Reference Antenna (applicable to connector version card)
A reference antenna has been used during the approval process for the
connector version radio card.
Specific details of the reference antenna used for testing is detailed in the table
below.
Important Note:
Use of an antenna which is the same ‘type’ (eg. Dipole) and has a gain equal to
or less that the reference antenna can be used without recertification.
Note: The Adapter cable must be considered as it is part of the system gain.
Use of an alternative antenna, different ‘type’ or same ‘type’ but higher gain will
invalidate the country approvals. Under this instant the OEM integrator is
responsible for re-evaluating the end product and obtaining separate approvals.
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 7 of 13
XXXXXXXX Rev X
Antenna Type:
Dipole
Antenna Characteristics:
Adapter cable:
FREQUENCY: 2400-2500MHz
CABLE LOSS: 0.9dB
OVERALL GAIN: (3dBi-0.9dB) = 2.1dB
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 8 of 13
XXXXXXXX Rev X
4.5 Radio Card Regulatory Markings
Regulatory markings are applied to the device signifying the radio (s) is approved
for use in the following countries: United States
4.6 National Country Requirements
NOTE:
The sections below assume that the conditions detailed in section 4.1 are met.
4.6.1 United States of America
The radio card is already approved under the requirements of the FCC.
End-product requirements with this module installed should include:
• FCC Part 15 (emissions class B)
Final product markings must include:
•
•
•
This product contains an approved Radio Module
Model: LA-5127C1
FCC ID: H9PLA5127C1
•
Important Notes
1. Co-location
The FCC approval EXCLUDES co-location with any other transmitter.
If the LA5127 is co-located with another transmitter (eg, Bluetooth Module), the
OEM is integrator is responsible for re-evaluating the end product and obtaining
a separate FCC authorization.
Symbol recommends the use of an accredited Laboratory to carry out the
necessary tasks.
2. Portable Use
The FCC approval of the module covers ‘mobile’ use.
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 9 of 13
XXXXXXXX Rev X
If the final product used in a manner where the antenna is closer than 20cm from
the user (portable use), the OEM is integrator is responsible for re-evaluating the
end product and obtaining a separate FCC authorization.
Symbol recommends the use of an accredited Laboratory to carry out the
necessary tasks.
3. Available Channels
For use in the USA the OEM must limit the available channels from Ch.1 - 11
4.7 Statements required for the User Guide
The following statements are required in the final product user guide.
Many on the statements are dependent on the application of the final product.
Symbol recommends that the OEM seeks the advice from an accredited test
laboratory.
4.7.1 General Statements
Any changes or modifications not expressly approved by  , could void the
user’s authority to operate the equipment.
4.7.2 FCC Statements
Co-located statement
To comply with FCC RF exposure compliance requirement, the antenna used for
this transmitter must not be co-located or operating in conjunction with any other
transmitter/antenna except those already approved in this filling.
Handheld Devices
To comply with FCC RF exposure requirements, this device must be operated in
the hand with a minimum separation distance of 20 cm or more from a person’s
body. Other operating configurations should be avoided.
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 10 of 13
XXXXXXXX Rev X
Remote and Standalone Antenna Configurations
To comply with FCC RF exposure requirements, antennas that are mounted
externally at remote locations or operating near users at stand-alone desktop of
similar configurations must operate with a minimum separation distance of 20 cm
from all persons.
Radio Frequency Interference Requirements – FCC
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
2.4GHz band operation
The available channels for 802.11 b/g operation in the US are Channels 1 to 11.
The range of channels is limited by firmware.
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 11 of 13
XXXXXXXX Rev X
5. Appendix 2: Product Mechanical Interface Drawing
The following drawings show the Product physical size and shape, LED indicator
and connector locations and pin assignments. PRELIMINARY USE ONLY
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 12 of 13
XXXXXXXX Rev X
LA-5127 CF card Integration Guide
Copyright 2004 Symbol Technologies, Inc.
Confidential Material – Disclosure Strictly Prohibited.
Page 13 of 13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Print high-res
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:02:15 10:36:39-08:00
Create Date                     : 2007:02:15 18:23:28Z
Metadata Date                   : 2007:02:15 10:36:39-08:00
Format                          : application/pdf
Title                           : Microsoft Word - LA-5127_User_Guide-FCC-FINAL.DOC
Creator                         : A00020946
Document ID                     : uuid:d625e191-5ef5-4508-8b44-2446650ee8d1
Instance ID                     : uuid:676b9466-964f-4079-b8e9-6656d72b366b
Page Count                      : 13
Author                          : A00020946

EXIF Metadata provided by EXIF.tools