Symbol Technologies LS4071ITA LS 4071 Scanner User Manual LS 4071 QRG

Symbol Technologies Inc LS 4071 Scanner LS 4071 QRG

Contents

manual 2

RS 2200/3200 Series LS 4071 Scanner Quick Reference
Quick Reference © 1997 SYMBOL TECHNOLOGIES, INC. All rights reserved.Symbol reserves the right to make changes to any product to improve reliability, function, or design.Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Symbol products might be used. An implied license only exists for equipment, circuits, and subsystems contained in Symbol products.Symbol Technologies, Inc.One Symbol PlazaHoltsville, NY 11742-1300http://www.symbol.com This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,360,798; 4,369,361; 4,387,297; 4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,262,627; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,321,246; 5,367,151; 5,373,148; 5,378,882; 5,377,361; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,578,810; 5,589,680; D305,885; D341,584; D344,501; D359,483; D362,435; D363,700; D363,918; D370,478.Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan).European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713.
1 Introduction The LS 4071 is a high performance scanner that lets you scan a bar code and transmit it to a base station up to 10 feet (3 meters) away, without a physical cable to limit your movement. Instead, the scanner communicates with the base station through a low power radio transmission. Scanning Made Easy To install the scanner or change the different programmable parameters of the LS 4071, see the Product Reference Guide . If you are using a Synapse cable, select the host type by scanning the appropriate bar code packed with the cable. If you are not using a Synapse cable, scan one of the bar codes beginning on page 6.If you need assistance, contact the technical person in charge of scanning at your site, or Symbol Technologies.
Quick Reference 2 Ready, Test, Scan Ready Make sure connections are secure, and the battery pack is charged. The battery must be charged before the scanner’s initial use, and after each day’s use. Placing the scanner in its base station between uses will help maintain the battery’s charge.Be sure the scanner is “paired” to the base station by scanning the Pairing bar code on the base. Test Aim the scanner away from you and press the trigger. When you press the trigger, the scanning beam is energized for approximately 3.0 seconds (default). Scan Make sure the symbol you want to scan is within the scanning range. See the LS 4071 Product Reference Guide . Also, be certain the scanner is within range of the base station: 10 feet (3 meters).The scanner has read the symbol when:• The yellow LED on the rear of the scanner turns green for a short period of time after the scanning beam turns off.The data has been successfully sent to the base station when:• You hear a short, high tone beep from the base (if default beeper settings are selected).• The yellow LED on the base blinks.
3 Aiming Scan the Entire Symbol • Your scan beam must cross every bar and space on the symbol.• The larger the symbol, the farther away you should hold the scanner.• Hold the scanner closer for symbols with bars that are close together.• A short, high tone beep from the base indicates a good decode. Right Wrong0123456789 0123456789
Quick Reference 4 Hold at an angle Do not hold the scanner directly over the bar code. Laser light reflecting directly back into the scanner from the bar code is known as specular reflection. This strong light can “blind” the scanner and make decoding difficult. The area where specular reflection occurs is known as a “dead zone”.You can tilt the scanner up to 65 ° forward or back and still achieve a successful decode. Simple practice quickly shows what tolerances to work within.65°MaxShaded area representsdead zone (±2°)Bar CodeScanBeamScanBeam65°Max
5 What Does The Beep Mean? When you hear 1 beep (short high tone) it means data has been decoded successfully. If any other beeps are heard, contact the technical person in charge of scanning. What If... If the scanner is not operating according to your needs, contact the technical person in charge of scanning. If there is no one in charge of scanning, call the Symbol Support Center at 1-800-653-5350.
Quick Reference 6 Host Types When using an RL475 system, select one of the bar codes below to communicate with an IBM 468X/9X host. Port 5BPort 9BPort 17 Note: To properly communicate with 468X/9X terminals, the driver corresponding to the port being used must be loaded and enabled when you are configuring your terminal system. See your terminal’s operating manual for details.
7 Host Types RS-232C Host Types Three RS-232C hosts are set up with their own parameter default settings. Selecting the ICL, Fujitsu or Nixdorf RS-232C terminal sets the defaults listed on the following page. These defaults take precedence over Standard RS-232 defaults. So, if you’ve selected Fujitsu RS-232C, then select the Standard RS-232 defaults, the Fujitsu defaults still take precedence. To return to the factory set defaults, scan the SET ALL DEFAULTS bar code below. See the table on the following page for terminal specific defaults. SET ALL DEFAULTS
Quick Reference 8 Host Types Parameter Standard ICL FUJITSU NIXDORFMode A/Mode BTransmit Code ID No Yes Yes Yes Data Transmission Format Data as is Data/Suffix Data/Suffix Data/Suffix Suffix CR/LF CR CR CR Baud Rate 9600 9600 9600 9600 Parity None Even None Odd Hardware Handshaking None RTS/CTSOption 3 None RTS/CTSOption 3 Software Handshaking None None None None Serial Response Time-out 2 Sec. 9.9 Sec. 2 Sec. 9.9 Sec. Stop Bit Select One One One One ASCII Format 8-Bit 8-Bit 8-Bit 8-Bit Beep On <BEL> Disabled Disabled Disabled Disabled RTS Line State Low High Low *Low = No data to send*In the Nixdorf Mode B, if CTS is Low, transmission of scan data is disabled. When CTS is High, bar code data is transmitted to the host.
9 Host Types When using an RL474 system, select one of the bar codes below to communicate with an RS-232C host. STANDARD RS-232CICL RS-232CNIXDORF RS-232C Mode ANIXDORF RS-232C Mode BFUJITSU RS-232C
Quick Reference 10 Regulatory Information Scanner LabelingCOMPLIES WITH US DHHS 21CFR1040. 10 SUBCHAPTER J AND IEC 825-1 : 1993/EN60825-1 1994 VORSICHT! LASERSTRAHLUNG TRITT AUS, WENN DECKEL (CODER KLAPPE) GEDEFFNET IST! MICHT IN DEN STRAHL BLICKEN!ATTENTION - LUMIÈRE LASER EN CAS D'OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAUDANGER - LASER LIGHT WHEN OPEN. AVOID DIRECT EYE EXPOSURELASER LIGHT -DO NOT STARE INTO BEAM680 nm LASER1.0 MILLIWATT MAX OUTPUTCLASS II LASER PRODUCT PATENT NO. XXXXXXXXXXXXXXXXXXXC A U T I O NACHTUNG LASERSTRAHL LASERKLASSE 2 NICHT IN DEN STRAHLBLICKEN,. LUMIERE LASER NE PAS REGARDER DANS LE FAISCEAUAPPARIEL A LASER DE CLASSE 2. CAUTION - LASER LIGHT. DO NOTSTARE INTO BEAM. IEC CLASS 2 LASER PRODUCT 680 nm, 1.0 mw LASERCOMPLIES WITH US DHHS 21CFR1040. 10 SUBCHAPTER J AND IEC 825-1 : 1993/EN60825-1:1994CAUTION – LASER LIGHT WHEN OPEN. DO NOT STARE INTO BEAMATTENTION – LUMIÈRE LASER EN CAS D'OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU IE C C L A S S 1 L A S E R P R O D U C TT I M E B A S I S : 1 0 0 SA P P A R I E L L A S E R D E C L A S S E IB A S E D E T E M P S : 1 0 0 SK L A S S E 1 L A S E R G E R A T E Z E I T B A S I S : 1 0 0 S PATENT NO. XXXXXXXXXXXXXXXXXXXor
11 Regulatory Information Class I Symbol U.S. Federal (FDA)/IEC825/EN60825 Class 1 laser products use low power visible or IR lasers. Class 1 laser devices are not considered to be hazardous when used for their intended purpose. To comply with U. S. Federal and International regulations, the following statement is required: Caution Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous visible or invisible laser light exposure. This advisory statement also applies to all other FDA/IEC825/EN60825 classes of laser products.
Quick Reference 12 Regulatory Information In accordance with Clause 5, IEC 0825 and EN60825, the follow-ing information is provided to the user: ENGLISH CLASS 1 CLASS 1 LASER PRODUCTCLASS 2 LASER LIGHTDO NOT STARE INTO BEAMCLASS 2 LASER PRODUCT DANISH KLASSE 1 KLASSE 1 LASERPRODUKTKLASSE 2 LASERLYFSE IKKE IND I STRÅLENKLASSE 2 LASERPRODUKT DUTCH KLASSE 1 KLASSE-1 LASERPRODUKTKLASSE 2 LASERLICHTNIET IN STRAAL STARENKLASSE-2 LASERPRODUKT FINNISH LUOKKA 1 LUOKKA 1 LASERTUOTELUOKKA 2 LASERVALOÄLÄ TUIJOTA SÄDETTÄLUOKKA 2 LASERTUOTE FRENCH CLASSE 1 PRODUIT LASER DE CLASSE 1CLASSE 2 LUMIERE LASERNE PAS REGARDER LE RAYON FIXEMENTPRODUIT LASER DE CLASSE 2
13 Regulatory Information GERMAN KLASSE 1 LASERPRODUKT DER KLASSE 1KLASSE 2 LASERSTRAHLENNICHT DIREKT IN DEN LASERSTRAHL SCHAUENLASERPRODUKT DER KLASSE 2 HEBREWITALIAN CLASSE 1 PRODOTTO AL LASER DI CLASSE 1CLASSE 2 LUCE LASERNON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 NORWEGIAN KLASSE 1 LASERPRODUKT, KLASSE 1KLASSE 2 LASERLYS IKKE STIRR INN I LYSSTRÅLENLASERPRODUKT, KLASSE 2 PORTUGUESE CLASSE 1 PRODUTO LASER DA CLASSE 1CLASSE 2 LUZ DE LASER NÃO FIXAR O RAIO LUMINOSOPRODUTO LASER DA CLASSE 2 SPANISH CLASE 1 PRODUCTO LASER DE LA CLASE 1CLASE 2 LUZ LASERNO MIRE FIJAMENTE EL HAZPRODUCTO LASER DE LA CLASE 2 SWEDISH KLASS 1 LASERPRODUKT KLASS 1KLASS 2 LASERLJUS STIRRA INTE MOT STRÅLENLASERPRODUKT KLASS 2RNV 1 numr khhzr rnv 1rnv 2 tur khhzrthi kvchy tk ,ul vzronumr khhzr rnv 2
Warranty Information For Warranty & Service Information, Call:1-800-653-5350 Outside North America, contact you local Symbol representative Symbol products are warranted against defects in workmanship and materials for a period of one year (unless specified otherwise) from the date of shipment, provided that the product remains unmodified and is operated under normal and proper conditions.This warranty is limited to repair or replacement at Symbol’s option, with reasonable promptness after being returned to Symbol by a carrier selected and paid for by the customer. These provisions do not prolong the original warranty term for any product which has been repaired or replaced by Symbol.This warranty applies to the original owner and does not extend to any product which has been subject to misuse, neglect, accidental damage, unauthorized repair or tampering. Preventive maintenance activities are not covered by warranty.70-19478-01Revision B - February 1997

Navigation menu