Symbol Technologies MC55A0 ENTERPRISE DIGITAL ASSISTANT (EDA) User Manual 2

Symbol Technologies Inc ENTERPRISE DIGITAL ASSISTANT (EDA) Users Manual 2

Users Manual 2

123MC551221611581237910127343123432512343572688610910 91817131914152116202223134359222102Create a PartnershipInstall ActiveSync®Communicate with Host1 Scan/Action Button2 Up/Down Button3 Microphone4 Power Button5 I/O Connector 6 Keypad7 Scan/Action Button8 Touch Screen (with screen protector)9 Scan/Decode LED10 Charging/Battery Status LED11 Radio Status LED12 Phone Speaker13 Handstrap14 Battery15 Battery Latch16 Camera Flash (optional)17 Camera (optional)18 Exit Window (see Data Capture Options)19 Tether20 Scan/Action Button21 Action Button22 Stylus 23 Speaker1 Talk2 Navigation3 Soft Key4 Scan/Action Button5 End6 Orange Key7 Backlight8 Blue Key9 OK10 Start MenuNote 1: To reset the MC55, press and hold the Power button for five (5) seconds. FEATURESPHONE SETUPCOMMUNICATIONGETTING STARTED - BATTERY INSTALLATIONNumeric Keypad Alpha-Numeric Keypad PIM Keypad CHARGINGSIM Card Installation (MC5574 only)Quick Start GuideDownload ActiveSync® 4.5 or higher from http://www.microsoft.com and follow the instructions to install ActiveSync onto the host computer.Follow the on-screen ActiveSync instructions to establish a connection between the MC55 and the host computer.Blue Key Use this key to access function keys shown on the keypad in blue.>Orange KeyUse this key to access the secondary layer of characters and actions.>>>>>Press the Blue key once to activate this state temporarily, followed by another key. Press the Blue key twice to lock this state. Press the Blue key a third time to unlock.Press the Orange key once to activate this state temporarily, followed by another key. Press the Orange key twice to lock this state. Press the Orange key a third time to unlock.NotificationsCharging/Battery Status LED:Scan/Decode LED:Slow blinking amber: Battery chargingSolid amber: Fully chargedFast blinking amber: Charging errorRed: Scanning activeGreen: Good Decode Scan/DecodeCharging/Battery StatusRadio StatusRadio Status LED:Green: RF activeInsert the BatteryRemove the Battery1. Insert the battery, bottom first, into the battery compartment.2. Press down on the battery until the battery latch snaps into place.3. Replace the handstrap.1. Press the Power button.2. Remove handstrap.3. Slide battery latch to the right. The battery ejects slightly.4. Grasp the battery and lift from the MC55.Charge the MC55Charge the BatterySlow Blinking Amber = ChargingCharging/Battery Status LEDSolid Amber = Fully chargedFast Blinking Amber = Charging errorNote: The 2400 mAh battery charges in less than four hours and the 3600 mAh battery charges in less than six hours.Use the Four-slot Battery Charger to charge batteries separately.1. Remove battery pack.2. Lift rubber access door.3. Slide SIM card holder up to unlock.4. Lift card holder.5. Insert SIM card into SIM holder.NOTE :The proper position of the SIM card—the card connector (i.e., gold area) should be facing outward with the bevelled corner facing away.6. Lower the SIM card holder down.7. Slide SIM card holder down to lock into place.8. Close rubber access door.9. Reinstall battery pack.Enter Your PINAfter installing the SIM card activate your mobile service connection. In most cases, SIM cards are preset with a PIN (Personal Identity Number), provided by your service provider.1. Press the Power button to turn on the MC55.2. Tap Start > Phone.3. Enter the PIN from your service provider.4. Tap Enter.Turn On the Phone Function1. Launch the Wireless Manager application. • On the Today screen, tap the Wireless Manager icon. or • On the Today screen, tap the signal icon and select Wireless Manager.2. On the Wireless Manager screen, tap Phone to turn on the phone function. The signal icon (wireless off) changes to (not connected) and then to (searching) indicating the MC55 is searching for a mobile connection. This may take a few seconds. The signal icon then changes to once a good mobile connection is established.Turn Off the Phone Function1. Launch the Wireless Manager application. • On the Today screen, tap the Wireless Manager icon. or • On the Today screen, tap the signal icon and select Wireless Manager.2. On the Wireless Manager screen, tap Phone to turn off phone function. Note: Remove protective shipping film that covers the touch screen, exit window and camera window before using.Press the Orange key once to lock the keypad into Alpha state. Press the Orange key a second time to return to the normal state.Press the Blue key once to activate this state, followed by another key.Blue Key Use this key to access function keys shown on the keypad in blue.>Orange KeyUse this key to access the secondary layer of characters.>>4 (Note 1)Use the Single-slot cradles (USB or Ethernet/Modem/USB), Four-slot cradles (Charge Only or Ethernet) or cables to charge the battery in the MC55.You can also charge a spare batteryusing the Single-slot cradle.
AVOID EXTREME WRIST ANGLESAVOID EXTREME WRIST ANGLESAVOID EXTREME WRIST ANGLESMC5590 MC5574MC55A0MC55Laser ScanningAVOID EXTREMEWRIST ANGLESScreen ProtectorCharge Only CableMotorola recommends the continued use of a screen protectorto minimize wear and tear. Screen protectors enhancethe usability and durability of touch screen displays. Benefits include:• Protection from scratches and gouges• Durable writing and touch surface with tactile feel• Abrasion and chemical resistance• Glare reduction• Keeping the device’s screen looking like new• Quick and easy installation.Not using a screen protector can affect your warranty coverage.An initial screen protector is already applied to your MC55.Contact your local account manager or Motorola, Inc. for more informationand purchasing details. Part number: KT-67525-01R Screen Protector 3/pk.Quick Start GuideMOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2010 Motorola, Inc. All rights reserved.72-127603-02 Rev. A — October 2010AVOID EXTREME WRIST ANGLEShttp://www.motorola.com/MC55MicroSD Card InstallationACCESSORIESAuto Charge CableUSB/Charge CableFour-slot Battery ChargerSingle-slot USB CradleSingle-slot Ethernet/Modem/USB CradleVehicle HolderFour-slot Charge Only CradleFour-slot Ethernet CradleImagingCamera DecodeCamera Photo1. Launch a bar code reading application on the MC55.2. Position the MC55 toward the bar code.3. Press the Scan button.4. In the image window align the red target over the bar code. When the MC55 decodes the bar code the Scan/Decode LED light green and a beep sounds.5. Release the Scan button.More Information on the MC55Visit the Motorola Web site at http://www.motorola.com/mc55Setting up, using and troubleshooting the MC55MC55 User Guide and Integrator GuideSoftware UpgradesAvailable at: http://supportcentral.motorola.comAdditional SoftwareCheck Motorola web site for approved applications.http://www.motorola.com/mc55Connecting and synchronizing with the host computerActiveSync® Help on the host computer. To view help, start ActiveSync®,Click Help - Microsoft ActiveSync Help.ActiveSync software available at http://www.microsoft.com/windowsmobileInformation on using programs on the MC55Tap Start – Help within the specific program.Service and WarrantyMC55 Regulatory GuideAvailable with MC55 and at http://supportcentral.motorola.com1. Remove battery.2. Lift rubber access door.3. Slide SIM card holder up to unlock.4. Lift SIM card holder.5. Carefully lift microSD card holder.6. Insert microSD card into card holder.NOTE :Proper position of the microSD card — the card connector (i.e., gold contacts) should be facing out as shown.7. Close the microSD card holder.8. Close the SIM card holder.9. Slide the SIM card holder down to lock into place.10. Close rubber access door.11. Replace battery.1. Tap Start > Pictures & Videos > Camera.2. Point the MC55 at an object.3. Press the Enter button.4. Hold MC55 still until “Shutter Sound” is heard.SIM Card HoldermicroSD Card HolderRubber Access DoorMotorola, Inc. One Motorola Plaza Holtsville, New York 11742-1300, USADATA CAPTURE OPTIONSGPS Information• Acquiring satellite signals may take a few minutes. It is best to be outside and have a clear, unobstructed view of the sky.• Without a clear view, acquisition takes much longer and could result in the MC5574 being unable to compute the initial position quickly.• Obtain a satellite fix before moving.• Shutdown GPS application when not in use.When using the GPS feature of the MC5574:Vehicle CradleNOTE: Data Capture Options are dependent upon configurations. • Laser Scanning only • Laser Scanning and Camera • Imaging only • Imaging and CameraTrigger HandleMagnetic Stripe Reader

Navigation menu