Symbol Technologies MC75A6 EDA (Enterprise Digital Assistant) User Manual MC75A User Guide

Download:
Mirror Download [FCC.gov]
Document ID	1295759
Application ID	K6WJreCQNKMevKRUn2KNDw==
Document Description	User manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	134.69kB (1683620 bits)
Date Submitted	2010-06-14 00:00:00
Date Available	2010-07-29 00:00:00
Creation Date	2017-11-09 05:14:45
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-09 05:14:45
Document Title	MC75A User Guide
Document Creator	FrameMaker 8.0
Document Author:	Motorola, Inc.

Using฀Bluetooth
6฀-฀3
Bluetooth฀Configuration
By default, the MC75A is configured to using the Microsoft Bluetooth stack. Refer to the MC75A Mobile Computer
Integrator Guide, Appendix B, for information on switching to the StoneStreet One Bluetooth stack.
Table 6-1 list the services supported by the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack.
Table฀6-1฀฀฀฀Bluetooth Services
Microsoft฀Bluetooth฀Stack
StoneStreet฀One฀Bluetooth฀Stack
OBEX Object Push Services
Hands-Free Audio Gateway Services
Hands-Free Audio Gateway Services
Serial Port Services
Serial Port Services
Personal Area Networking Services
Personal Area Networking Services
PBAP Services
IrMC Services
HID Client Services
A2DP/AVRCP Services
AF
Dial-Up Networking Services
OBEX Object Push Services
Dial-Up Networking Services
HID Client Services
A2DP/AVRCP Services
File Transfer Services
Headset Audio Gateway Services
Table 6-2 list the COM ports available for the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack.
Table฀6-2฀฀฀฀COM Ports
Microsoft฀Bluetooth฀Stack
COM5
COM9
StoneStreet฀One฀Bluetooth฀Stack
COM5
COM9
COM11
COM21
COM22
COM23
Bluetooth฀Power฀States
Cold฀Boot
With฀StoneStreet฀One฀Bluetooth฀Stack
Performing a cold boot on the MC75A turns off Bluetooth after initialization (which takes a few moments). It is
normal to see the Bluetooth icon appear and disappear (when using the Classic Home screen), as well as a wait
cursor, when initialization proceeds in all modes.
6฀-฀4
MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
With฀Microsoft฀Bluetooth฀Stack
Performing a cold boot retain the state of the Bluetooth radio prior to the cold boot.
Warm฀Boot
With฀StoneStreet฀One฀Bluetooth฀Stack
Performing a warm boot on the MC75A turns off Bluetooth.
With฀Microsoft฀Bluetooth฀Stack
Suspend
Performing a warm boot retain the state of the Bluetooth radio prior to the warm boot.
When there is an active Bluetooth connection, the Bluetooth radio goes into low power mode maintaining the active
connection. When there is no active connection, the Bluetooth radio turns off.
NOTE
If there is an active Bluetooth connection between the MC75A and another Bluetooth device, the MC75A will
not timeout. However, if the user presses the Power button on the MC75A, the MC75A will suspend (except
when on a call) and upon receiving data from a remote Bluetooth device, the MC75A will wake from suspend
mode. For example, headset redial or Bluetooth scanner sending data to the MC75A.
With฀Microsoft฀Bluetooth฀Stack
If there is an active Bluetooth connection between the MC75A and another Bluetooth device and there is no
data activity, the MC75A will timeout. However, if the user presses the Power button on the MC75A, the
MC75A will suspend (except when on a call) and upon receiving data from a remote Bluetooth device, the
MC75A will wake from suspend mode. For example, headset redial or Bluetooth scanner sending data to the
MC75A.
NOTE
AF
With฀StoneStreet฀One฀Bluetooth฀Stack
Resume
When the MC75A resumes, Bluetooth turns on if it was on prior to suspend.
Using฀Microsoft฀Bluetooth฀Stack
The following sections provide information on using the Microsoft Bluetooth stack.
Turning฀the฀Bluetooth฀Radio฀Mode฀On฀and฀Off
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the
radio is off, other Bluetooth devices cannot see or connect to the MC75A. Turn on the Bluetooth radio to exchange
information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity.
NOTE
To achieve the best battery life turn off radios not in use.
Enabling฀Bluetooth
To enable Bluetooth:
Using฀Bluetooth
1.
6฀-฀5
Tap Wireless Manager and then tap the Bluetooth bar or
Figure฀6-1฀฀฀฀Bluetooth Mode Tab
Check the Turn On Bluetooth checkbox.
3.
Tap OK.
Disabling฀Bluetooth
To disable Bluetooth:
1.
AF
2.
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
Tap Wireless Manager and then tap the Bluetooth bar or
Tap Start > Setting > Connections > Bluetooth icon > Mode tab.
Un-check the Turn On Bluetooth checkbox.
3.
Tap OK.
2.
Discovering฀Bluetooth฀Device(s)
The MC75A can receive information from discovered devices without bonding. However, once bonded, the MC75A
and a bonded device exchange information automatically when you turn the Bluetooth radio on. See Bonding with
Discovered Device(s) on page 6-32 for more information.
To find Bluetooth devices in the area:
1.
Ensure that Bluetooth is enabled on both devices.
2.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3.
Ensure that the two devices are within 30 feet (10 meters) of one another.
4.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
Figure฀6-2฀฀฀฀Bluetooth - Devices Tab
Tap Add new device. The MC75A begins searching for discoverable Bluetooth devices in the area.
AF
5.
MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Figure฀6-3฀฀฀฀Searching for Bluetooth Devices
6.
Select a device from the list.
6฀-฀6
Figure฀6-4฀฀฀฀Select a Bluetooth Device
7.
Tap Next. The Enter Passcode window appears.
NOTE
If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Figure฀6-5฀฀฀฀Enter Passcode
Enter the Passcode on the other device. The device is added to the Bluetooth list.
AF
8.
6฀-฀7
Using฀Bluetooth
Figure฀6-6฀฀฀฀Bluetooth Connection Confirmation
You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and
tap Next. If the device does not have a specific passcode, enter a passcode in the Passcode field and tap
Next. The Bluetooth radio tries to connect with the device.
9.
If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the
created passcode to establish a paired connection. (If you entered a passcode from the device, you shouldn’t
have to do anything on the other device.)
10. When the connection is complete, a list of matching and supported services on the device appears.
11. Select the services you want to use and tap Finish. The services on the new devices have to be selected or
else the pairing won’t include those services, even though the devices are paired. If services are not selected,
you will be continually reprompted for the passcode from the device.
12. The device appears in the list on the main window.
After the passcodes have been accepted on both sides, you have a trusted (“paired”) connection.
6฀-฀8
MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Available฀Services
NOTE
Some devices might not require a PIN. This depends upon the device’s authentication.
See the following sections for information on available services.
Object฀Push฀Services฀via฀Beam
NOTE
You can only send files to a remote device using the Beam function.
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the
MC75A and another Bluetooth enabled device:
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Programs > File Explorer.
4.
Navigate to the file to transfer.
5.
Tap and hold on the filename until the pop-up menu appears.
AF
1.
Figure฀6-7฀฀฀฀File Explorer Window
6.
Select Beam File. The MC75A searches for Bluetooth devices in the area.
7.
Tap Tap to send next to the Bluetooth device to send the file to. The MC75A communicates with the device
and send the file. When completed, Tap to send changes to Done.
6฀-฀9
Using฀Bluetooth
Figure฀6-8฀฀฀฀Beam File Window
To transfer a contact between the MC75A and another Bluetooth enabled device:
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Contacts
4.
Navigate to the contact to transfer.
5.
Tap and hold on the contact until the pop-up menu appears.
AF
1.
Figure฀6-9฀฀฀฀Contact Window
6.
Select Send Contact > Beam. The MC75A searches for Bluetooth devices in the area.
7.
Tap Tap to send next to the Bluetooth device to send the file to. The MC75A communicates with the device
and send the contact. When completed, Tap to send changes to Done.
Internet฀Sharing
Internet Sharing allows the user to connect a computer or laptop to the MC75A and use the MC75A as a modem to
connect to an office network or ISP.
To use MC75A as a modem using Bluetooth:
1.
Ensure that the device is not connected to the computer or laptop.
2.
On the MC75A, ensure that the Phone is on and a data connection is configured.
6฀-฀10 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
3.
Tap > Programs > Internet Sharing.
4.
In the PC Connection list, select Bluetooth PAN.
5.
In the Network Connection list, select the connection type.
Select the network connection that the device should use to connect to the Internet.
6.
Tap Connect.
7.
On the computer or laptop, setup a Bluetooth PAN with your device.
Select Start > Control Panel > Network Connections.
b.
Under Personal Area Network, select Bluetooth Network Connection.
c.
Right-click on Bluetooth Network Connection and select View Bluetooth network devices.
d.
In the Bluetooth Personal Area Network Devices window select your device.
e.
Click Connect. The computer connects to the device via Bluetooth.
If your computer is Bluetooth-enabled and you select Bluetooth as the PC connection, you must initiate and
complete the Bluetooth PAN partnership before Internet Sharing will work. For more information, refer to
Windows Help and Support.
AF
NOTE
a.
8.
To verify, on the PC or laptop, launch Internet Explorer and open a web site.
9.
To end dial-up networking, on the MC75A tap Disconnect.
Hands-free฀Services
To connect to a Bluetooth headset:
Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
NOTE
Only WAN audio is routed to the headset. System audio is still emitted through the MC75A speaker.
You can accept calls and re-dial using the Hands-free profile.
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Settings > Connections > Bluetooth icon.
4.
Tap New device. The MC75A searches for Bluetooth devices in the area.
5.
Select the headset name and tap Next. The Passcode window appears.
6.
Enter the headset’s passcode.
7.
Tap Next. The MC75A connects to the headset. Refer to the headset user manual for instructions on
communicating with a Bluetooth device.
NOTE
During an active connection, the MC75A cannot go into suspend mode when the Power Button is
pressed. A message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
Using฀Bluetooth 6฀-฀11
Figure฀6-10฀฀฀฀WWAN Bluetooth Audio Notification Dialog Box
Serial฀Port฀Services
Headset icon
AF
Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
4.
Tap Add new device. The MC75A begins searching for discoverable Bluetooth devices in the area.
5.
Select a device from the list.
6.
Tap Next. The Enter Passcode window appears.
NOTE
1.
If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
8.
In the device list, tap the serial device. The Partnership Settings window displays.
9.
Select the Serial Port checkbox.
7.
10. Tap Save.
11. Tap COM Ports tab.
12. Tap New Outgoing Port. The add device window appears.
13. Select the serial device in the list and then tap Next.
14. Select a COM port from the drop-down list.
15. Tap Finish.
NOTE
No connection is made at this point. An application must open the selected COM port to trigger Microsoft
Bluetooth stack to open the connection.
6฀-฀12 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
ActiveSync฀Using฀Serial฀Port฀Services
Use the wireless Bluetooth serial port connection for ActiveSync just as you would a physical serial cable
connection. You must configure the application that will use the connection to the correct serial port.
To set up a Bluetooth ActiveSync connection:
Before setting up a Bluetooth ActiveSync connection, configure the Bluetooth function of your device.
NOTE
For additional security, disable network bridging on the computer (specifically, bridging to a Remote NDIS
adapter) before connecting to the computer to pass though to the Internet or a network. For more information
on network bridging, see Windows Help on your computer.
The instructions below are for computers that support the Windows XP SP2 or later version operating system.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
On the computer, click Start > Settings > Control Panel.
4.
Double-click Bluetooth Devices.
5.
On the Options tab, select the Turn discovery on and Allow Bluetooth devices to connect to this
computer checkboxes.
AF
1.
Figure฀6-11฀฀฀฀Computer Bluetooth Devices Window
6.
On the COM Ports tab, click Add.
7.
Select the Incoming (device initiates the connection) option, then click OK.
Note the number of the COM port that was added.
8.
Click OK.
9.
Click Start > All Programs > Microsoft ActiveSync.
10. Click File > Connection Settings.
Figure฀6-12฀฀฀฀ActiveSync Connection Settings
Using฀Bluetooth 6฀-฀13
11. On the Allow connections to one of the following drop-down list, select the COM port with the number you
AF
noted earlier.
12. On the MC75A, tap Start > Programs > ActiveSync.
13. Tap Menu > Connect via Bluetooth.
Synchronization is automatically initiated. The ActiveSync icon appears on the lower right corner of the Today
screen.
If an Authentication is required, the Enter Passcode screen appears, type an alphanumeric passkey (PIN
code), then tap Next; enter the same passkey on the other device.
The passkey is recommended for enhanced security. Your passkey must be between 1 to 16 alphanumeric
characters.
If you do not want to use a passkey, tap Next.
14. To disconnect the ActiveSync connection, tap the ActiveSync icon on the Today screen.
15. Tap Disconnect.
Phone฀Book฀Access฀Profile฀Services
Phone Book Access profile (PBAP) is used to synchronize contacts between a remote device and the MC75A. To
establish an PBAP synchronization:
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap Start > Settings > Connection tab > Bluetooth icon > Devices tab.
4.
Tap Add New Device.The MC75A searches for a Bluetooth device, such as a Car Kit.
5.
Select a device from the list.
6.
Tap Next. The Enter Passcode window appears.
NOTE
7.
If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter Passcode
window does not appear.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
6฀-฀14 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
8.
A dialog box appears requesting if you want to transfer contacts to the car kit.
9.
Select Yes or No.
10. If Yes is selected, contacts from the MC75A are transferred to the car kit.
Dial-Up฀Networking฀Services
Dial-up networking allows the user to connect a PC or laptop to the MC75A and use the MC75A as a modem to
connect to an office network or ISP.
Before setting up dial-up networking, obtain dial-up information and other necessary settings (username, password
and domain name, if required) for the office network or ISP. To create a new Bluetooth connection:
Ensure the MC75A is discoverable and connectable.
2.
On the PC or laptop, set up Bluetooth according to the manufacturer’s instructions.
3.
On the PC or laptop Bluetooth software, search for the MC75A and select the Dial-up Networking service.
4.
Using dial-up software on the PC or laptop, connect to the MC75A.
5.
The MC75A phone function dials the ISP number and connects to the ISP.
6.
To verify, on the PC or laptop, launch Internet Explorer and open a web site.
AF
Connect฀to฀a฀HID฀Device
1.
The MC75A can connect to an Human Interface Device (HID) device such as a Bluetooth keyboard or mouse:
Ensure that Bluetooth is enabled on both devices.
2.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3.
Ensure that the two devices are within 30 feet (10 meters) of one another.
4.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
5.
Tap Add new device. The MC75A begins searching for discoverable Bluetooth devices in the area.
6.
Select a HID device from the list.
7.
Tap Next. The Enter Passcode window appears. Refer to the device’s User Manuals for more information.
1.
NOTE
8.
If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Tap Connect. The MC75A connects to the HID device.
A2DP/AVRCP฀Services
A2DP/AVRCP is used to connect to a high-quality stereo headset:
1.
Ensure that Bluetooth is enabled on both devices.
2.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3.
Ensure that the two devices are within 30 feet (10 meters) of one another.
4.
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
Using฀Bluetooth 6฀-฀15
5.
Tap Add new device. The MC75A begins searching for discoverable Bluetooth devices in the area.
6.
Select a stereo headset from the list.
7.
Tap Next. The Enter Passcode window appears. Refer to the device’s User Manuals for more information.
NOTE
8.
If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Tap Connect. The MC75A connects to the stereo headset.
For stereo headsets that can use hands-free services, connect to the hands-free service after connecting to the
A2DP service:
Tap Start > Settings > Connections tab > Bluetooth icon > Devices tab.
2.
Tap Add new device. The MC75A begins searching for discoverable Bluetooth devices in the area.
3.
Select a stereo headset from the list.
4.
Tap Next. The Enter Passcode window appears. Refer to the device’s User Manuals for more information.
If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Tap Connect. The MC75A connects to the stereo headset.
5.
AF
NOTE
1.
6฀-฀16 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Using฀StoneStreet฀One฀Bluetooth฀Stack
The following sections provide information on using the StoneStreet One Bluetooth stack.
Turning฀the฀Bluetooth฀Radio฀Mode฀On฀and฀Off
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When the
radio is off, other Bluetooth devices cannot see or connect to the MC75A. Turn on the Bluetooth radio to exchange
information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in close proximity.
To achieve the best battery life turn off radios not in use.
NOTE
Disabling฀Bluetooth
Enabling฀Bluetooth
AF
To disable Bluetooth, tap the Connection icon on the Status bar and select Wireless Manager in the Connectivity
dialog box. Tap the blue Bluetooth bar to turn off the Bluetooth radio.
To enable Bluetooth, tap the Connection icon on the Status bar and select Wireless Manager in the Connectivity
dialog box. Tap the blue Bluetooth bar to turn on the Bluetooth radio.
Modes
Wizard฀Mode
The BTExplorer application has two modes for managing Bluetooth connections: Wizard Mode and Explorer Mode.
The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth users. To
switch between modes, select View > Wizard Mode or View > Explorer Mode.
Wizard Mode provides a simple process for discovering and connecting to Bluetooth devices.
Switching between Wizard Mode and Explorer Mode closes all active connections.
NOTE
Wizard Mode shows the devices and services in a simple Favorites view created by following the step-by-step
wizard.
Explorer฀Mode
The Explorer Mode window is easy to navigate and provides greater control to users familiar with Bluetooth. The
menu bar provides quick access to the options and tools used to connect to devices. To access Explorer Mode, tap
View > Explorer Mode.
Figure฀6-13฀฀฀฀Explorer Mode Window
Using฀Bluetooth 6฀-฀17
You can also use the “tap and hold” technique to view available options. Scroll bars and view options are similar to
those on the Windows desktop. The tree structure lists the following sub-items:
AF
• Local Device - This device
• Remote Device - Other Bluetooth devices
• Trusted Devices - Bonded (paired) Bluetooth devices
• Untrusted Devices - Discovered devices that are not bonded
• Favorites - Selected services that are set as Favorite for quick access.
NOTE
Switching between Wizard Mode and Explorer Mode closes all active connections.
Discovering฀Bluetooth฀Device(s)
The MC75A can receive information from discovered devices without bonding. However, once bonded, the MC75A
and a bonded device exchange information automatically when you turn the Bluetooth radio on. See Bonding with
Discovered Device(s) on page 6-32 for more information.
To find Bluetooth devices in the area:
1.
Ensure that Bluetooth is enabled on both devices.
2.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3.
Ensure that the require profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more information.
4.
Ensure that the two devices are within 30 feet (10 meters) of one another.
5.
Tap Start > BTExplorer. The BTExplorer window appears.
NOTE
6.
If favorite connections have already been created, the Favorites screen displays. If no favorite connections
have been created, the New Connection Wizard screen displays.
Tap Menu > New Connection.The New Connection Wizard appears.
T
6฀-฀18 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Figure฀6-14฀฀฀฀BTExplorer Window
Select Explore Services on Remote Device or another from the drop-down list and tap Next.
NOTE
BTExplorer searches for Bluetooth devices in the area.
8.
If a device discovery action has not been previously performed, a device discovery is automatically initiated. If
a device discovery has previously been performed, the device discovery process is skipped, and the
previously found list of devices displays. To start a new device discovery, tap and hold in the window and select
Discover Devices from the pop-up menu.
AF
7.
Figure฀6-15฀฀฀฀Discover Devices Dialog Box
The discovered devices display in the Select Remote Device window.
Figure฀6-16฀฀฀฀Select Remote Device Window
Select a device from the list and tap Next. The MC75A searches for services on the selected Bluetooth device.
AF
9.
Using฀Bluetooth 6฀-฀19
Figure฀6-17฀฀฀฀Device Services
If the MC75A discovers a service but the service is not supported, the service icon is grayed-out.
NOTE
10. Select a service from the list and press Next. The Connection Favorite Options window appears.
Figure฀6-18฀฀฀฀Connection Favorite Options Window
11. In the Favorite Name text box, enter a name for this service that will appear in the Favorite window.
6฀-฀20 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
12. Tap Next. The Connection Summary window appears.
13. Tap Connect to add the service to the Favorite window and connect to the service.
Available฀Services
NOTE
AF
Figure฀6-19฀฀฀฀Favorites Window
Some devices might not require a PIN. This depends upon the device’s authentication.
See the following sections for information on available services.
File฀Transfer฀Services
Shared folders are a security risk.
NOTE
To transfer files between the MC75A and another Bluetooth enabled device:
1.
Ensure that OBEX File Transfer profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more
information.
If favorite connections have already been created, the Favorites screen displays. If no favorite connections
have been created, the New Connection Wizard screen displays.
NOTE
2.
Use the Connection Wizard to search for a Bluetooth device.
3.
Select the device and tap Next. The Select Remote Service window appears.
4.
Tap Next. The Connection Favorite Options window appears.
5.
Tap Next. The Connection Summary window appears.
6.
Tap Connect. The remote device’s accessible folders appear.
Figure฀6-20฀฀฀฀File Transfer Window
Double-tap the file to copy. The Save Remote File window appears.
AF
7.
Using฀Bluetooth 6฀-฀21
Figure฀6-21฀฀฀฀Save Remote File Window
Tap and hold on the file. A pop-up menu appears.
9.
Select the action to perform:
8.
• New - create a new file or folder on the remote device
• Delete - delete the selected file on the remote device.
• Get File - copy the file from the remote device to the MC75A.
• Put File - copy a file from the MC75A to the remote device.
Creating฀a฀New฀File฀or฀Folder
To create a new folder or file on the remote device:
1.
Tap and hold on the screen and select New > Folder or New > File. The Create New Folder or Create New
File window appears.
2.
Enter the name for the new folder or file.
3.
Tap OK to create the new folder or file on the remote device.
6฀-฀22 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Deleting฀a฀File
To delete a file from the remote device:
1.
Tap and hold on the file to delete and select Delete.
2.
In the Delete Remote Device File dialog box tap Yes.
Getting฀a฀File
To copy a file from a remote device:
Double-tap or tap and hold on the file and select Get. The Save Remote File window appears.
2.
Navigate to the directory to save the file.
3.
Tap Save. The file is transferred from the remote device to the MC75A.
Copying฀a฀File
AF
To copy a file to a remote device:
1.
1.
Tap Action > Put. The Send Local File window appears.
2.
Navigate to the directory to save the file and select a file.
3.
Tap Open. The file copies from the MC75A to the remote device.
Connecting฀to฀the฀Internet฀Using฀an฀Access฀Point
This section explains how to access a Bluetooth-enabled LAN access point (AP) for a network connection. Use
Internet Explorer to connect to a server.
Ensure the MC75A is discoverable and connectable. See Device Info Tab on page 6-34.
2.
Ensure that the Personal Area Networking profile is enabled on the MC75A. See Profiles Tab on page 6-45
for more information.
3.
Use the Connection Wizard to search for a Bluetooth AP.
NOTE
1.
If favorite connections have already been created, the Favorites screen displays. If no favorite connections
have been created, the New Connection Wizard screen displays.
4.
Select the Personal Area Network or Network Access service and select Connect from the pop-up menu.
The MC75A connects with the access point.
5.
Tap Start > Internet Explorer. The Internet Explorer window appears.
6.
In the address field, enter an internet address and tap the Enter button. The web page loads.
NOTE
Network Access profile is not supported.
Dial-Up฀Networking฀Services
Dial-up networking allows the user to connect a PC or laptop to the MC75A and use the MC75A as a modem to
connect to an office network or ISP.
Before setting up dial-up networking, obtain dial-up information and other necessary settings (username, password
and domain name, if required) for the office network or ISP. To create a new Bluetooth connection:
Using฀Bluetooth 6฀-฀23
Ensure the MC75A is discoverable and connectable. See Device Info Tab on page 6-34.
2.
Ensure that the Dial-Up Networking profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more
information.
3.
Tap Menu > Settings > Services tab.
4.
Tap Add button.
5.
Select Dial-up networking Service.
6.
Tap OK. The Edit Local Services window appears.
AF
1.
Figure฀6-22฀฀฀฀Edit Local Service Window
In the Local COM Port drop-down list, select DUN1 for GSM configurations or WMP9 for CDMA
configurations.
8.
Tap OK twice.
9.
On the PC or laptop, set up Bluetooth according to the manufacturer’s instructions.
7.
10. On the PC or laptop Bluetooth software, search for the MC75A and select the Dial-up Networking service.
11. Using dial-up software on the PC or laptop, connect to the MC75A.
12. The MC75A phone function dials the ISP number and connects to the ISP.
13. To verify, on the PC or laptop, launch Internet Explorer and open a web site.
Object฀Exchange฀Push฀Services
Object Exchange (OBEX) is a set of protocols that allows sharing objects such as Contacts or pictures using
Bluetooth.
To exchange contact information with another Bluetooth enabled device:
1.
Ensure the MC75A is discoverable and connectable. See Device Info Tab on page 6-34.
2.
Ensure that the OBEX Object Push profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more
information.
NOTE
3.
If favorite connections have already been created, the Favorites screen displays. If no favorite connections
have been created, the New Connection Wizard screen displays.
Use the Connection Wizard to search for a Bluetooth device.
6฀-฀24 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
4.
Select the device and tap Next.
5.
Select the OBEX Object Push service and select Connect. The OBEX Object Push window appears.
6.
In the Action drop-down list, select one of the following options: Send Contact Information, Swap Contact
Information, Fetch Contact Information, or Send a Picture.
Sending฀a฀Contact
To send a contact to another device:
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
AF
1.
Prior to sending and receiving contacts, a default contact must be set up before attempting to send a
contact.
NOTE
Figure฀6-23฀฀฀฀OBEX Object Push Window
2.
In the Action: drop-down list, select Send Contact Information.
3.
Tap
. The Select Contact Entry window appears.
Figure฀6-24฀฀฀฀Select Contact Entry Window
4.
Select a contact to send to the other device.
5.
Tap OK.
6.
Tap OK to send the contact to the other device and display a confirmation dialog box on the other device to
accept the contact. A Send Contact dialog appears.
Using฀Bluetooth 6฀-฀25
7.
Tap Ok.
Swapping฀Contacts
To swap contacts with another device:
NOTE
Prior to swapping contacts, a default contact must be set up before attempting to send a contact.
Ensure that the MC75A is connectable.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
AF
1.
Figure฀6-25฀฀฀฀OBEX Object Push Window
2.
In the Action: drop-down list, select Swap Contact Information.
3.
Tap
. The Select Contact Entry window appears.
Figure฀6-26฀฀฀฀Select Contact Entry Window
4.
Select a contact to send to the other device.
5.
Tap OK.
6.
Tap OK to swap contacts with the other device and display a confirmation dialog box on the other device to
accept the contact.
7.
Tap Ok.
6฀-฀26 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Fetching฀a฀Contact
To fetch a contact from another device:
NOTE
Prior to sending and receiving contacts, a default contact must be set up before attempting to send a contact.
Ensure that the MC75A is connectable.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
AF
1.
Figure฀6-27฀฀฀฀OBEX Object Push Window
2.
In the Action: drop-down list, select Fetch Contact information.
3.
Tap OK. The contact on the other device is copied.
Sending฀a฀Picture
To send a picture to another device:
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
1.
Figure฀6-28฀฀฀฀OBEX Object Push Window
2.
In the Action: drop-down list, select Send A Picture.
3.
Tap
. The Send Local Picture window appears.
Figure฀6-29฀฀฀฀Send Local Picture Window
Using฀Bluetooth 6฀-฀27
Navigate to the picture to send to the other device.
5.
Tap Open.
6.
Tap OK to send the picture to the other device and display a confirmation dialog box on the other device to
accept the picture. A Send Picture dialog appears.
7.
Tap Ok.
Headset฀Services
AF
4.
To connect to a Bluetooth headset:
Ensure the MC75A is connectable (required when automatic re-connect is initiated). See Device Info Tab on
page 6-34.
2.
Ensure that the Headset Audio Gateway service is enabled on the MC75A (required when automatic
re-connect is initiated). See Services Tab on page 6-34 for more information.
3.
Use the Connection Wizard to search for a Bluetooth headset.
4.
Select the device and tap Next.
1.
5.
Select the Headset service name and select Connect. A beep is heard in the headset. Refer to the headset
user manual for instructions on communicating with a Bluetooth device.
NOTE
When using a Bluetooth headset with Headset Services, you cannot accept or end a call from the headset.
You must accept or end a call on the MC75A.
6.
Press the call button on the headset to accept the connection. System audio is heard on the Bluetooth
headset..
7.
When a call is received on the MC75A, tap the Accept button on the MC75A to answer the call. If the call
button is pressed, the Bluetooth connection is disconnected.
NOTE
Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
6฀-฀28 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Hands-free฀Services
To connect to a Bluetooth headset:
NOTE
Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Only WAN audio is routed to the headset. System audio is still emitted through the MC75A speaker.
You can accept calls and re-dial using the Hands-free profile.
Hands-free profile does not support 3-way calling.
Ensure the MC75A is connectable (required when automatic re-connect is initiated). See Device Info Tab on
page 6-34.
2.
Ensure that the Hands Free profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more
information.
3.
Use the Connection Wizard to search for a Bluetooth hands-free headset.
4.
Select the hand-free device and tap Next.
5.
Select the Hands-free service name and select Connect. The MC75A connects to the headset. Refer to the
headset user manual for instructions on communicating with a Bluetooth device.
6.
During an active connection, the MC75A cannot go into suspend mode when the Power Button is pressed. A
message appears notifying the user.
AF
1.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
Headset icon
Figure฀6-30฀฀฀฀WWAN Bluetooth Audio Notification Dialog Box
Serial฀Port฀Services
Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
1.
Use the Connection Wizard to search for a Bluetooth serial device.
2.
Select the device and tap Next. The Connection Favorite Options window appears.
Using฀Bluetooth 6฀-฀29
3.
In the Local COM Port: drop-down list select a COM port.
4.
Tap Finish.
ActiveSync฀Using฀Serial฀Port฀Services
NOTE
By default, COM ports COM5, COM9, COM11, COM21, COM22 and COM23 are Bluetooth virtual ports. If an
application opens one of these ports, the Bluetooth driver activates and guides you through a Bluetooth
connection.
AF
Use the wireless Bluetooth serial port connection for ActiveSync just as you would a physical serial cable
connection. You must configure the application that will use the connection to the correct serial port.
Figure฀6-31฀฀฀฀ActiveSync Connection Settings Window on PC
To establish an ActiveSync connection:
Ensure that the Sync profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more information.
2.
Use the Connection Wizard to search for a Bluetooth device, such as a PC. In the drop-down list select
ActiveSync via Bluetooth.
3.
Select the device and tap Next. The Connection Favorite Options window appears.
1.
4.
Tap Connect. The Remote Service Connection window appears.
Figure฀6-32฀฀฀฀Remote Service Connection Window
5.
In the Service Type drop-down list, select Active Sync.
6฀-฀30 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
6.
Tap OK. The MC75A connects the PC and an ActiveSync session begins.
7.
Tap Finish. The Connection Favorite Options window appears.
8.
To end the session, tap the ActiveSync icon in the Favorite window and select Disconnect from the pop-up
window.
Personal฀Area฀Network฀Services
NOTE
This profile supports Ad-hoc and PAN User. Network Access Profile is not supported.
Connect two or more Bluetooth devices to share files, collaborate, or play multi-player games. To establish a
Personal Area Network connection:
Ensure that the Personal Area Networking profile is enabled on the MC75A. See Profiles Tab on page 6-45
for more information.
2.
Use the Connection Wizard to search for a Bluetooth device.
3.
Select the device and tap Next. The Connection Favorite Options window appears.
4.
Tap Next. The Connection Summary window appears.
5.
Tap Connect. The MC75A connects to the Bluetooth device.
AF
1.
IrMC฀Synchronization฀Services
IrMC Synchronization is used to synchronize PIM contacts between a remote device and the MC75A. To establish
an IrMC synchronization:
Ensure the MC75A is connectable (required when automatic re-connect is initiated). See Device Info Tab on
page 6-34.
2.
Ensure that the Sync profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more information.
3.
Tap Menu > Settings > Services tab.
4.
Tap Add button.
1.
5.
Select IrMC Synchronization.
6.
Tap OK. The Edit Local Services window appears.
7.
Tap OK twice.
8.
Use the Connection Wizard to search for a Bluetooth device, such as a Car Kit.
9.
Select the device and tap Next. The Connection Favorite Options window appears.
10. Tap and hold IrMA Synchronization and select Connect in the pop-up menu.
NOTE
To automatically transfer contact with a Car Kit, ensure that the IrMC Synchronization service is enabled on
the MC75A.
A2DP/AVRCP฀Services
A2DP/AVRCP is used to connect to a high-quality stereo headset:
Using฀Bluetooth 6฀-฀31
Ensure the MC75A is connectable (required when automatic re-connect is initiated). See Device Info Tab on
page 6-34.
2.
Ensure that the remote Bluetooth device is in discoverable mode. See the devices user manual for
instructions.
3.
Ensure that the A2DP/AVRCP profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more
information.
4.
Tap Menu > Settings > Services tab.
5.
Tap Add button.
6.
Select Advanced Audio Distribution Services.
7.
Tap OK. The Edit Local Services window appears.
8.
Tap OK twice.
9.
Tap Menu > New Connection.
1.
AF
10. Select Connect to High-Quality Audio from the drop-down list.
11. Tap Next.
12. Select the device and tap Next.
13. Enter the PIN Code for the remote device and then tap OK. The Connection Favorite Options window
appears.
14. Tap Next.
15. Tap Connect. The MC75A connects to the high-quality audio headset.
For stereo headsets that can use hands-free services, connect to the hands-free service after connecting to the
A2DP service:
Tap Menu > New Connection.
2.
Select Connect to Headset from the drop-down list.
3.
Tap Next.
4.
Select the stereo headset and tap Next.
5.
Select the Hands-Free unit service and then tap Next.
6.
Tap Next.
7.
Tap Connect.
1.
Connect฀to฀a฀HID฀Device
The MC75A can connect to an Human Interface Device (HID) device such as a Bluetooth keyboard:
1.
Ensure the MC75A is connectable (required when automatic re-connect is initiated). See Device Info Tab on
page 6-34.
2.
Ensure that the remote Bluetooth device is in discoverable mode. See the device user manual for instructions.
3.
Ensure that the HID Client profile is enabled on the MC75A. See Profiles Tab on page 6-45 for more
information.
6฀-฀32 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
4.
Tap Menu > New Connection.
5.
Select Explore Services on Remote Device from the drop-down list.
6.
Tap Next.
7.
Select the device and tap Next.
8.
Select the service and tap Next.
9.
The Connection Favorite Options window appears.
10. Tap Next.
Bonding฀with฀Discovered฀Device(s)
11. Tap Connect. The MC75A connects to the HID device.
AF
A bond is a relationship created between the MC75A and another Bluetooth device in order to exchange
information in a secure manner. Creating a bond involves entering the same PIN on the two devices. After creating
a bond and turning on the Bluetooth radios, the devices recognize the bond and can exchange information without
re-entering a PIN.
To bond with a discovered Bluetooth device:
NOTE
If favorite connections have already been created, the Favorites screen displays. If no favorite connections
have been created, the New Connection Wizard screen displays.
Tap Start > BTExplorer. The BTExplorer window appears.
2.
Tap Menu > New Connection. The New Connection Wizard window appears.
3.
In the drop-down list, select Pair with Remote Device.
4.
Tap Next. The Select Remote Device window appears.
Devices discovered previously are listed to save time. To start a new device discovery, tap and hold on the list
area and select Discover Devices from the pop-up menu.
NOTE
1.
Figure฀6-33฀฀฀฀Select Remote Device Window
5.
Select a device from the list and tap Next. The PIN Code Request window appears.
Figure฀6-34฀฀฀฀Connection Favorite Options Window
Using฀Bluetooth 6฀-฀33
In the PIN Code field, enter the PIN code.
7.
Tap OK. The Pairing Status window displays.
8.
Tap Finish. The devices are successfully paired. The device name moves to the Trusted Devices window.
Deleting฀a฀Bonded฀Device
AF
6.
To delete a device no longer needed:
Tap Start > BTExplorer. The BTExplorer window appears.
2.
Tap Menu > Trusted Devices. The Trusted Devices window appears.
3.
Tap and hold on the device select Delete Link Key in the pop-up menu.
4.
A confirmation dialog appears. Tap Yes.
1.
Accepting฀a฀Bond
When a remote device wants to bond with the MC75A, enter a PIN when requested to grant permission.
Ensure that the MC75A is set to discoverable and connectable. See Bluetooth Settings on page 6-34. When
prompted to bond with the remote device the PIN Code Request window appears.
1.
Figure฀6-35฀฀฀฀PIN Code Request Window
6฀-฀34 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
2.
In the PIN Code: text box, enter the same PIN entered on the device requesting the bond. The PIN must be
between 1 and 16 characters.
3.
In the Device Name: text box, edit the name of the device requesting the bond, if desired.
4.
Tap OK to create the bond. The MC75A can now exchange information with the other device.
Bluetooth฀Settings
Use the BTExplorer Settings window to configure the operation of the BTExplorer application. Tap Menu >
Settings. The BTExplorer Settings window appears.
Device฀Info฀Tab
AF
Use the Device Info tab to configure the MC75A’s Bluetooth connection modes.
Figure฀6-36฀฀฀฀BTExplorer Settings - Device Info Tab
Table฀6-3฀฀฀฀Device Info Tab Data
Item
Device Name
Description
Displays the name of the MC75A.
Select whether or not the MC75A is discoverable by other Bluetooth devices.
Connectable Mode
Select whether or not the MC75A is connectable by other Bluetooth devices.
Discoverable Mode
Services฀Tab
NOTE
Ensure that the MC75A is discoverable and connectable when remote devices use MC75A services.
Use the Services tab to add or delete Bluetooth services.
Figure฀6-37฀฀฀฀BTExplorer Settings - Services Tab
To add a service:
Tap Add. The Add Local Service window displays.
AF
1.
Using฀Bluetooth 6฀-฀35
Figure฀6-38฀฀฀฀Add Local Service Window
In the list, select a service to add.
2.
3.
Tap OK. The Edit Local Service window displays for the selected service.
4.
Select the appropriate information and then tap OK. See the following sections for information on the available
services.
Dial-Up฀Networking฀Service
Dial-up Networking allows other Bluetooth devices to access a dial-up modem.
T
6฀-฀36 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Figure฀6-39฀฀฀฀BTExplorer Settings - Dial-up Networking Information
Table฀6-4฀฀฀฀Dial-up Networking Information Data
Description
AF
Item
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None, Authenticate, or
Authenticate/Encrypt.
Local COM Port
Select the COM port.
Local Baud Rate
Select the communication baud rate.
Local Port Options
Select the port option.
File฀Transfer฀Service
File transfer allows other Bluetooth devices to browse files.
Figure฀6-40฀฀฀฀BTExplorer Settings - File Transfer Information
Table฀6-5฀฀฀฀File Transfer Information Data
Description
AF
Item
Using฀Bluetooth 6฀-฀37
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None, Authenticate,
or Authenticate/Encrypt.
Root Directory
Select the directory that other Bluetooth devices can access.
File Permissions
Select the file permissions for the selected directory. Check the appropriate box to
grant read access, write access, and delete access.
Hands-Free฀Audio฀Gateway฀Service
Hands-Free Service Audio Gateway allows connection to hands-free devices.
Figure฀6-41฀฀฀฀BTExplorer Settings - Hands-Free Audio Gateway
Table฀6-6฀฀฀฀Hands-Free Audio Gateway Data
item
Service Name
Description
Lists the name of the audio service.
6฀-฀38 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Headset฀Audio฀Gateway฀Service
AF
Figure฀6-42฀฀฀฀BTExplorer Settings - Headset Audio Gateway
Headset Service Audio Gateway allows connection to headset devices.
Table฀6-7฀฀฀฀Headset Audio Gateway Data
Item
Service Name
IrMC฀Synchronization฀Service
Description
Lists the name of the audio service.
The IrMC Synchronization service used to synchronize PIM contacts between a remote device and the MC75A.
Figure฀6-43฀฀฀฀BTExplorer Settings - IrMC Synchronization
Using฀Bluetooth 6฀-฀39
Table฀6-8฀฀฀฀IrMC Synchronization Data
Item
Description
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None, Authenticate, or
Authenticate/Encrypt.
Phonebook
Select the Phonebook checkbox to allow synchronization with the MC75A’s contacts.
Select Read, Write, Create and/or Delete to allow phonebook permissions.
OBEX฀Object฀Push฀Service
AF
OBEX Object Push allows other Bluetooth devices to push contacts, business cards, pictures, appointments, and
tasks to the MC75A.
Figure฀6-44฀฀฀฀BTExplorer Settings - OBEX Exchange Information
Table฀6-9฀฀฀฀OBEX Exchange Information Data
Item
Description
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None,
Authenticate, or Authenticate/Encrypt.
Do not allow clients to push objects
Disables clients from pushing objects to the MC75A.
Inbox Directory
Select a directory where another Bluetooth device can store files.
Personal฀Area฀Networking฀Service
Personal Area Networking hosts a Personal Area Network which allows communication with other Bluetooth
devices.
Figure฀6-45฀฀฀฀BTExplorer Settings - Personal Area Networking
Table฀6-10฀฀฀฀Personal Area Networking Data
Service Name
Service Security
Support Group Ad-Hoc
Networking
Serial฀Port฀Service
Description
AF
Item
6฀-฀40 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Displays the name of the service.
Select the type of security from the drop-down list. Options are None,
Authenticate, or Authenticate/Encrypt.
Select to enable Ad-Hoc networking.
Serial port allows other Bluetooth devices to access COM ports.
Figure฀6-46฀฀฀฀BTExplorer Settings - Serial Port Services
Using฀Bluetooth 6฀-฀41
Table฀6-11฀฀฀฀Serial Port Services Data
Item
Description
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None, Authenticate, or
Authenticate/Encrypt.
Local COM Port
Select the COM port.
Local Baud Rate
Select the communication baud rate.
Local Port Options
Select the port option.
Advanced฀Audio฀Distribution฀Service
Service Name
AF
Advanced Audio Distribution hosts connects from Bluetooth devices supporting high-quality stereo audio.
Figure฀6-47฀฀฀฀BTExplorer Settings - Advanced Audio Distribution
Table฀6-12฀฀฀฀Advanced Audio Distribution Data
Item
Service Name
Description
Lists the name of the audio service.
6฀-฀42 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Audio฀Video฀Remote฀Control฀Service
Audio Video Remote Control hosts connections from Bluetooth devices supporting audio remote-control
functionality.
AF
Figure฀6-48฀฀฀฀BTExplorer Settings - Audio Video Remote Control
Table฀6-13฀฀฀฀Audio Video Remote Control Data
Item
Service Name
Security฀Tab
Description
Lists the name of the audio service.
Security settings allows you to set global security policies for Bluetooth. Note that these settings are only active on
local Services that are set to Authenticate or Authenticate/Encryption. You can set authentication on local Services
under the Services tab.
To adjust the security settings for an individual service, select the Services tab first, then select the individual
service, then Properties.
Figure฀6-49฀฀฀฀BTExplorer Settings - Security Tab
NOTE
To use PIN Code, select Authenticate or Authenticate/Encrypt from the Service Security drop-down
list on each local service.
Using฀Bluetooth 6฀-฀43
Table฀6-14฀฀฀฀Security Tab Data
Item
Description
Select for automatic use of the PIN code entered in the PIN Code text box.
It is recommended not to use this automatic PIN code feature. See Security
on page 6-2 for more information.
PIN Code
Enter the PIN code.
Encrypt Link On All Outgoing
Connections
Select to enable or disable encryption on all outgoing connections to other
Bluetooth devices.
Discovery฀Tab
AF
Use the Discovery tab to set and modify discovered devices.
Use PIN Code (Incoming
Connection)
Figure฀6-50฀฀฀฀BTExplorer Settings - Discovery Tab
Table฀6-15฀฀฀฀Discovery Tab Data
Item
Description
Inquiry Length
Sets the amount of time the MC75A takes to discover Bluetooth devices in
the area.
Name Discovery Mode
Select either Automatic or Manual to automatically attempt to discover a
Bluetooth device's name after finding the device.
Discovered Devices - Delete
Devices
Deletes all discovered devices and link keys from memory.
Discovered Devices - Delete
Linked Keys
Removes all pairing from remote Bluetooth devices, and makes them all
un-trusted.
Virtual฀COM฀Port฀Tab
Virtual COM Port defines which COM ports BTExplorer attempts to use for virtual COM ports. Check the
appropriate checkbox to use the port as a virtual COM port. When finished, choose Apply to enforce changes, or
Revert to restore the original settings.
Figure฀6-51฀฀฀฀BTExplorer Settings - Virtual COM Port Tab
Table฀6-16฀฀฀฀Virtual COM Port Tab Data
COM5:Bluetooth
COM9:Bluetooth
COM11:Bluetooth
COM21:Bluetooth
COM22:Bluetooth
HID฀Tab
Enable or disable COM Port 5.
Enable or disable COM Port 9.
Enable or disable COM Port 11.
Enable or disable COM Port 21.
Enable or disable COM Port 22.
Enable or disable COM Port 23.
COM23:Bluetooth
Description
AF
Item
6฀-฀44 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Use the HID tab to select The Human Interface Device Profile programming interface defines the protocols and
procedures to be used to implement HID capabilities.
Provides support for devices such as mice, joysticks, keyboards.
Figure฀6-52฀฀฀฀BTExplorer Settings - HID Tab
Table฀6-17฀฀฀฀HID Tab Data
Enable Key Repeat
Delay
Rate
Profiles฀Tab
Description
AF
Item
Using฀Bluetooth 6฀-฀45
Enables key repeat functionality.
To increase key repeat delay, drag the Delay slider to the right. To decrease
key repeat delay, drag the Delay slider to the left.
To increase key repeat speed, drag the Rate slider to the left. To decrease
key repeat speed, drag the Rate slider to the right.
Use the Profile tab to load or remove Bluetooth services profiles. If a profile is not used, it can be removed to save
memory.
Figure฀6-53฀฀฀฀BTExplorer Settings - Profile Tab
1.
Tap a check box next to the profile to load (activate).
The Serial Port profile is always active and cannot be removed.
2.
Tap Select All to select all profiles or tap Deselect All to deselect all profiles.
3.
Tap Apply to activate the profiles and then Close to exit the application.
6฀-฀46 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Figure฀6-54฀฀฀฀BTExplorer Settings - System Parameters Tab
item
Page Timeout
Link Supervision Timeout
Description
Sets the amount of time the MC75A searches for a device before moving on
the next device.
Sets the amount of time that the MC75A will wait for a device to come back
into range after it has gone out of range. If the device does not come back
into range by the set time, the MC75A drops the connection.
Miscellaneous฀Tab
AF
Table฀6-18฀฀฀฀System Parameters Tab Data
System฀Parameters฀Tab
Figure฀6-55฀฀฀฀BTExplorer Settings - Miscellaneous Tab
Using฀Bluetooth 6฀-฀47
Table฀6-19฀฀฀฀Miscellaneous tab Data
Item
Description
Select the connection type to highlight when connected. In the Wizard Mode,
the only options are Favorites or None. In the Explorer Mode the options are
None, Tree View Only, List View Only, or Tree and List View.
Apply Text Style
Select the text style to apply to the connection text.
Apply Text Color
Select the text color to apply to the connection text.
AF
Highlight Connections
D
AF
6฀-฀48 MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Introduction
AF
Chapter฀7฀Accessories
MC75A accessories, listed below, provide a variety of product support capabilities.
Table฀7-1฀฀฀฀MC75A Accessories
Accessory
Cradles
CRD7X00-1000RR
Single Slot USB/Serial
Cradle
Part฀Number
Description
Charges the MC75A main battery and a spare battery.
Synchronizes the MC75A with a host computer through a
USB connection.
CRD7000-4000ER
Charges the MC75A main battery and connects the
MC75A with an Ethernet network.
Four Slot Charge Only
Cradle
CRD7X00-4000CR
Charges up to four MC75A devices.
VCD7000 Vehicle Cradle
VCD7X00-P000R
Installs in a vehicle and charges the MC75A main battery
and a spare battery. Provides serial data communication
between an MC75A and an external device.
Four Slot Battery Charger
SAC7X00-4000CR
Charges up to four MC75A spare batteries. Includes an
MC75A shim.
Serial Charging Cable
25-102776-01R
Provides power to the MC75A and serial communication
with a host computer.
USB Charging Cable
25-102775-01R
Provides power to the MC75A and USB communication
with a host computer.
Charge Only Cable
25-95214-02R
Provides power to the MC75A.
Auto Charge Cable
25-70979-01R
Charges the MC75A using a vehicle’s cigarette lighter.
Four Slot Ethernet Cradle
Chargers
Cables
7฀-฀2
MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Table฀7-1฀฀฀฀MC75A Accessories (Continued)
Accessory
Part฀Number
Description
DEX Cable
25-76793-01R
Connects the MC75A to a vending machine.
Modem Inverter Cables
25-70924-03R
Modem inverter cable.
O’Neil Printer Cable
25-91519-01R
Printer cable for O’Neil printers.
Zebra Printer Cable
25-91518-01R
Printer cable Zebra Road Warrior printers.
Zebra Printer Cable
25-91515-01R
Printer cable for Zebra QL printers.
Magnetic Stripe Reader
(MSR)
MSR7000-100R
Snaps on to the MC75A and adds magstripe read
capabilities.
Debit Card Reader
DCR7X00-100R
Allows easy data capture with the swipe of a magnetic
stripe card and personal identification number (PIN)
entry using a numeric keypad.
Snap-on Mobile Payment
Module with Chip and PIN
DCR7X00-200R
Allows easy data capture with magnetic stripe cards, EMV
compliant Chip and PIN cards and personal identification
number (PIN) entry using a numeric keypad.
Modem Dongle
MDM9000-100R
Provides modem connectivity.
Spare 3600 mAh
lithium-ion battery
BTRY-MC7XEAB00
Replacement 3600 mAh battery.
Spare 4800 mAh
lithium-ion battery
BTRY-MC7XEAB0H
Optional 4800 mAh battery.
AF
Miscellaneous
BTRY-KT-1R5X-MC7XR
Replacement 3600 mAh battery and battery door.
Battery Kit for 4800 mAh
battery
BTRY-KT-2R5X-MC7XR
Replacement 4800 mAh battery and battery door.
Headset
50-11300-050R
Use in noisy environments.
Belt Mounted Rigid Holster
SG-MC70011110-01R
Clips onto belt to hold the MC75A when not in use.
Fabric Holster
SG-MC7521215-01R
Soft holder for added protection.
Stylus
Stylus-00002-03R
Replacement stylus (3-pack).
Wall Mounting Kit
8710-050006-01R
Use for wall mounting the four slot cradles.
Screen Protector
KT-67525-01R
Package of 3 screen protectors.
Software
Enterprise Mobility Developer Kits (EMDKs), available at:
http://support.symbol.com.
Battery Kit for 3600 mAh
battery
Single฀Slot฀USB/Serial฀Cradle
This section describes how to use a Single Slot USB/Serial cradle with the MC75A. For USB communication setup
procedures refer to the MC75A Integrator Guide.
Accessories
7฀-฀3
The Single Slot USB/Serial Cradle:
• Provides 5.4 VDC power for operating the MC75A.
• Synchronizes information between the MC75A and a host computer. Refer to the MC75A Integrator Guide for
information on setting up a partnership between the MC75A and a host computer.
• Charges the MC75A’s battery.
• Charges a spare battery.
Charging฀the฀MC75A฀Battery
Connect the cradle to power. Insert the MC75A into the slot to begin charging.
AF
Charging/Battery Status
LED
Figure฀7-1฀฀฀฀MC75A Battery Charging
Charging฀the฀Spare฀Battery
Spare Battery
Figure฀7-2฀฀฀฀Spare Battery Charging
Spare Battery
Charging LED
7฀-฀4
MC75A฀Enterprise฀Digital฀Assistant฀User฀Guide
Battery฀Charging฀Indicators
The Single Slot USB/Serial Cradle charges the MC75A’s main battery and a spare battery simultaneously.
The MC75A’s charge LED indicates the status of the battery charging in the MC75A. See Table 1-2 on page 1-7 for
charging status indications.
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle. See
Table 7-2 for charging status indications.
The 3600 mAh battery fully charges in less than five hours and the 4800 mAh battery fully charges in less than
seven hours.
Charging฀Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC75A.
AF
To accomplish this, for small periods of time, the MC75A or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The MC75A or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See Table 1-2 on page 1-7 and Table 7-2.
Table฀7-2฀฀฀฀ Spare Battery LED Charging Indicators
Spare฀Battery฀LED
(on฀cradle)
Off
Battery is not charging; battery is not inserted correctly in the cradle;
cradle is not powered
Spare battery is charging.
Charging complete.
Slow Blinking Amber
Solid Amber
Indication
Fast Blinking Amber
Charging error.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Motorola, Inc.
Copyright                       : 2009
Create Date                     : 2010:02:22 09:24:37Z
Keywords                        : "MC75A, mobile computer, MC75A6, MC75A8, MC75A0"
Modify Date                     : 2010:02:23 08:22:41-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : FrameMaker 8.0
Metadata Date                   : 2010:02:23 08:22:41-05:00
Format                          : application/pdf
Description                     : MC75A
Title                           : MC75A User Guide
Creator                         : Motorola, Inc.
Subject                         : MC75A, mobile computer, MC75A6, MC75A8, MC75A0
Producer                        : Acrobat Distiller 9.3.0 (Windows)
Document ID                     : uuid:7687e713-73c9-4586-94b6-1d61fe621c6d
Instance ID                     : uuid:a591bf5f-2bfa-4540-ae20-c57732d4556a
Page Mode                       : UseOutlines
Page Count                      : 50

EXIF Metadata provided by EXIF.tools