Symbol Technologies PDT7537 PCS GSM Handheld Terminal User Manual
Symbol Technologies Inc PCS GSM Handheld Terminal Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 260889 |
| Application ID | Brn6EIdAUwR1wX0aLNVR9w== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 74.74kB (934189 bits) |
| Date Submitted | 2002-08-02 00:00:00 |
| Date Available | 2002-08-02 00:00:00 |
| Creation Date | 2002-07-24 15:28:56 |
| Producing Software | Acrobat 5.0 Scan Plug-in for Windows |
| Document Lastmod | 2002-07-24 15:29:15 |
| Document Title | Users Manual |
| Document Creator | Acrobat 5.0 Scan Plug-in for Windows |
7500
PDT 7500 Series
0 19992000 5301301. TECHNOLOGIES, INC. All nghu marved.
Symbol mm; 311: light to make changes «o my product an lmpmve reliabilliy,
immiion oi design
Symbol does nm amnme any product lizblllly arising om of, DI in connmion with, [he
syphcalitm or use ofany pmducr, citcnif, or applloan'on dumbed hmm.
Nu limo; is granted, tithe: “pi-5,1; oi by iinphoouoh, moppol, or olherwiu nude!
my pmn: 1th 61 pmm, covering 01 mlmin; [0 my combination, Sysrtm, apparatus,
machine, material, melhod, or procus in which Symbol mam; might be 1.331, An
lmplizd hm only aim for equipment, circuits, and subsystem conuined in Symbol
producfi.
Symbol is a regmend animal; of Symbol Tachnologlu, Inc. other 17!»er nhmu
mentioned in (his mum] my be ludemnks or registered nadzmarks of Iheir
respective companie: and an Ileuby acknowledgad.
Symbol Technologies, Inc;
On; Symbol 01m
Holuvlllt. N.Y. 11742-1300
hup=//www,;ymbol.com
This piodm i; sound by on: oi mom of 0m following us. and 1016191 Pamm:
115.3663.“ No. 4,460,120; 4,496,331 ; 4,593,136; 4,603,261; 4,607,156; 4,651,750;
4,673,305; 4,736,095; 4,753,717; 4,316,660; 4,345,350; 4,396,016; 4,397,532;
4,323,231; 4,933,533; 4,992,717; 5,015,333; 5,017,765; 5,011,641; 5,019,135;
5,047,617; 5,103,461; 5,113 ,445; 5,130,520; 5,140,144; 5,142,550; 5149 ,950;
5157 ,637; 5,163,143; 5,163149; 5,130,904; 5,116,131. 5,219, 591, 5230, 033;
5,135,167; 5,143 ,655; 5, 147161; 5,250, 791 5, 250, 792; 5, 260, 553, 5,262,627;
5,261,613; 5,166 ,737; 5 ,;273,393 5,230,162; 5, 230, 163; 5,130,164; 5,130,493;
5,304,736; 5,304,733; 5,306,300; 5,311,146; 5,324,914; 5,337,361; 5,367,151;
5,373,143; 5,373,331; 5,396,053; 5,396,055; 5,399,346; 5,403,031; 5,410,139;
5,410,140; 5,412,193; 5,413,312; 5,410,411; 5,436,440; 5,444,131; 5,449,391;
5,449,393; 5,463,949; 5,471,041; 5,473,993; 5,479,000; 5,473,002; 5,479,441;
5,504,323 5,519,577; 5,523,621; 5,532,469; 5,543,610; 5,545,339; 5,551,592;
5,557,093; 5,573,310; 5,531,070; 5,539,679; 5,539,630; 5,603,102; 5,612,531;
5,619,013; 5,627,359; 5,637,352; 5,664,129; 5,663,303; 5,675,139; 5,693,929;
5,693,335; 5,705,300; 5,714,746; 5,723,351; 5,734,151- 5,734,153; 5,742,043;
5,745,794; 5,754,537; 5,762,516; 5,763,363; 5,767,500; 5,739,713; 5,739,731;
5,303,237; 5,311,735; 5,311,737; 5,315,311; 5,321,519, 5,311,520, 5,313,311;
5,323,050, 5,350,073; 5,361,615; 5,374,720; 5,375,415; 5,900,617; 5,902,939;
5,907,146; 5,912,450; 5,914,473; 5,917,173; 5,920,059; 5,923,025; 5,929,420;
5,945,653; 5,945,659; 5,946,194; 5,959,235; 6,001,913; 6,021,947; 6,047,391;
6,050,491; 6,053,413; 6,056,100; 6,065,673; 6,067,297; 6,063,190, 0305335;
0341534; 13344501; D359,433; 0361453; D363,700; D363,9lfl; 13370473;
n333,124; 13391250, D405,077; D406,531; 0414371; 11414,172, 13413543;
D423,463; D424,035.
Invmzlon No. 55,353; 61,539; 69,060; 69,137 trim-ll; No. 1,601,796; 1,907,375;
1,955,269 Uszn).
Bunyan 3mm 367,299;414231; 367,300; 367,193; UK 2,072,331; fiance 31703933;
luly1;138,713.
rev. 06100
Quick Reference
Introduction
The PDT 7500 Series portable data terminal puts the processing
power of a 486 PC in the user’s hand. The terminal uses a
rechargeable Lithium-Ion 1400 mAh smart battery, and
incorporates pen technology and bar code scanning capability in a
key-based terminal
The PDT 7500 ruggedized hand-held terminal combines:
' PC-srzndard architecture (32-bit 486 DXZ)
. Microsoft® MS-DOS 6.22 or Windost CE operating system
- Wireless communication capability using Symbol‘s wireless
LAN technology
. An optional integrared Wireless Wide Area Network
(WWAN) cellular radio (CDPD and GSM)
. Integrated laser or imager scanning capability (l- and 2-Di-
mensional)
0 25 -key, 36-key, or 49-kc'y keypad
- Touch screen
. rim-compliant interface for printing and communications
PDT 7500 Series
About This Guide
This guide provides information on the operation of (he PDT 75 00
Series terminal. Specifically, the following mpics are discussed:
' Parts of the PDT 7500 on page 3
' Installing New or Recharged Batteries on page 5
- Operating the PDT 7500 on page 7
- Using the PDT 7500 36-sz Keypad on page 10
- Using the PDT 7500 49-sz Keypad on page 11
- Using the PDT 7500 ZS-Key Keypad on page 13
' Using the Integrated Laser Scanner on page 14
' Using the Imager on page 16
0 Host Communications on page 17
- Using the Touch Screen on page 18
0 Troubleshooting on page 18.
Accessories
Each PDT 7500 requires one 1400 mAh Li-lon battery (p/n 21-
38602—06). The following optional accessories are available from
Symbol Technologies:
0 Additional Li-Ion battery
0 Stylus for performing pen functions
' Single-slot cradle
' Four-slot cradle
. Vehicle cradle
- IrDA compliant printer
0 UBC 2000 charging adapter
0 Null modem cable
0 Holster.
Quick Reference
Parts of the PDT 7500
Front View
WAN Antenna
(PDT 7szx only)
Scan LED
LCD
Comnwnlcadan LED
Thumb Rest
o,
‘qoo 9
0000}.-
PowerKyy
Scan Window
PDT 7500 Series
Parts of the PDT 7500 (continued)
Bottom View
0 O 0 “r“
IrDA Port _ Ccmmunlcadons
0 Port
Back View
Battery Latch
Quick Reference
Installing New or Recharged Batteries
Caution: To ensure proper terminal operation, use ONLY the
Symbol Li-Ion battery in the PDT 75004
To install a new or recharged Li-Ion
battery:
1. Hook the base of the new bar-
tery in the top of the battery
compartment, then press into
place
2. Slide the battery latch to secure
the battery.
K the battery latch is not closed, do not operate the terminal,
otherwise data may be lost.
Caution: Do not expose the battery to temperatures in excess of
140°F (60°C). Do not disassemble, incinerate, or short
circuit the battery.
Removing the Battery from the Terminal
To rerunve the Li-lon battery from the
terminal:
ll Suspend the terminal’s power.
2, Slide the battery release switch
towards the top of the terminal
until the lock releases.
PDT 7500 Series
3l Lift the battery up and out of the battery compartment
Charging the Battery in the Terminal
To charge the terminal’s battery, plate the PDT 75 00 in the cradle
or connect the synchronization/charging cable.
The tetminal’s charging LED |i turns yellow while charging, then
turns green when the battery is fully charged1 which takes 2-3
hours, Aflashing yellow LED indicates there may be a problem with
the battery
For instructions on setting up the cradle, refer to the Quick
Reference Guide that shipped with your cradle or to the PDT 7500
Series Product Reference Guide (72-39225-xx for DOS terminals,
or 72-41235-xx for Windows CE Terminals).
Charging the Spare Battery
The cradle also has a spare battery charging slot. To charge the
spare Ii-lon battery in the CRD 7500 cradle, place the battery into
the charging slot in the cradle. Charging begins automatically and
the charge LED on the cradle turns yellow. The charge LED turns
green upon successful completion of the charge cycle, which takes
approximately 4 hours. if the LED does not light, no battery is
present. If the LED blinks yellow, the battery is faulty.
You may also charge the battery in the UBC 2000 Battery Charger
See the Quick Reference Guide which came with the mac 2000 for
more information.
Quick Reference
LED Indication
For all charging methods, the terminal’s battery charging LED
indicates the battery charging status as follows:
Battery Charge srm Charge LED Indication
Battery absent/no charge power Off
Battery charging Yellow
Battery fully charged Green
Abnormal battery Flashing Yellow
Operating the PDT 7500
Powering the Terminal OnIOfi
Note: Before the terminal can be powered on, it must be ini-
tialized and the battery must be fully charged, Refer to
the PDT 7500 Series Product Reference Guide for your
terminal [or information on initializing the terminal.
Caution: Do not operate the terminal from an external power
source with a dead battery installed. This may cause a
terminal reboot and loss of data when the external pow-
er is removed, since the terminal cannot shut down
properly and enter its low power state.
To power on the terminal:
1. Make sure the terminal’s battery is fully diarged.
2. Press the PWR key
To suspend the rerminal’s operation, press the PWR key.
Turning the Backlight OnIOfl
To turn the bacldight on or off, press the blue FUNC key, then the
LAMP key,
PDT 7500 Series
Controlling the Screen Contrast
To lighten the screen contrast, press the blue FUNC key, then the
LIGHT key. To darken the screen contrast, press the FUNC key,
then the DARK Key.
Resetting the PDT 7500
If your PDT 7500 Series terminal stops responding to input from
buttons on the screen, you must reset it,
Performing a Warm Boot (DOS and Windows CE Terminals)
A warm boot restarts the terminal and saves all stored records and
entries.
Note: Files that remain open during a warm hoot may not be
retained,
To perform a warm boot, press and hold down the PWR key for 6
seconds, then release.
Performing a Cold Boot (DOS and Windows CE Terminals)
A cold boot restarts the terminal. In the Windows CE environment,
die registry and objects stored are reset to original settings.
To perform a cold boot, press and hold the PWR key for 15 seconds,
then release. On the DOS terminal, this value can be reconfigured
in Setup (see the Product Reference Guide for more information)
Performing a Hard Reset (Windows CE Terminals Only)
A hard reset also restarts the PDT 7500 Series terminal, but erases
all stored records and entries. Therefore, never perform a hard reset
unless a warm/cold hoot does not solve your problem.
Note: On the Windows CE terminal, you can restore any data
previously synchronized with your computer during the
next ActiveSync operan'oni See the Quick Reference
Guide which came with your cradle, or the PDT 75 00
Product Reference Guide for Windows CE for more in-
formation,
Quick Reference
To perform a hard reset:
1. Remove the battery for 20 minutes or longer.
2. Replace the battery in die terminal.
3, The calibration screen displays
Note: With a hard reset, formats preferences and other settings
are restored to their original factory defaults.
Calibratlng the Screen (Windows CE Terminals Only)
The first time you start your PDT 7500 terminal (and Whenever rhe
terminal is cold-booted), the calibration screen displays. This
section describes how to calibrate your terminal so the cursor on the
touch screen aligns with the tip of your stylus.
Note: If your terminal came loaded wirh another software ap-
pliearion, the calibration screen may not display.
To calibrate your PDT 7500 terminal:
1, If necessary, adjust the contrast on the PDT 7500 so the screen
is clear and readable. See “Controlling the Screen Contrast”
on page 8 for instructions.
2. As the screen instructs, carefully press and briefly hold the sty-
lus on the center of each target. Repeat as the target moves
around the screen.
Cunlulr‘ puss an enema hm am:
on mum at Ms W;
mom at new: ms 1mm me why;
4.
3. Tap the screen when prompted to accept new calibrations
PDT 7500 Series
Using the PDT 1500 36-Key Keypad
The 36—key keypad uses an alphanumeric keypad that produces the
26—characler alphabet (A-Z), numbers 40-9), and assorted
characters The keypad is color-coded to indicate which modifier
key (ALPHA, cm, FUNC, and Sim-T) (0 press to produce a
particular character or action.
San human
0 The default numeric keypad produces the numbers 0-9.
- Press ALPHA and the appropriate key to produce the alpha
characters A-Z.
- Press FUNC (blue) and the Corresponding numeric key to pro-
duce the function keys F1-F10.
- Press the cursor keys (4, p, A, v) to move die cursor left,
right, up and down on the screen.
- Press BKSP to erase information entered on the display, one
character at a time
- Press SPACE to enter a blank space.
' Press CLEAR to partially or completely escape from an appli-
cation level or screen. CLEAR also erases all entered data
from the screen.
10
Quick Reference
' Press ENTER after entering data or a command.
0 Press CTRL to perform the control function This key is un-
der application control.
- Press SHIFT and a key to produce various character keys; refer
to the PDT 75 00 Series Product Reference Guide for your ter-
minal or your application guide [or the keypad mapping,
Note: Key functions can be changed by an application Your
keypad may not function exactly as described above.
Using the PDT 1500 49-K3y Keypad
The 49-key keypad uses an alphanumeric keypad that produces the
26—character alphabet (A-Z), numbers (0-9}, and assorred
characters The keypad is color-coded to indicate which modifier
key (CTRL, FUNC, and SH]I~T) (0 press (0 produce a particular
character or action
. The default numeric keypad produces rhe numbers 0-9,
. The default alpha keyboard produces the lower-case alpha
characters a-zr
' Press FUNC and the corresponding numeric key to produce
the function keys F1-F10.
11
PDT 7500 Series
Press the cursor keys (4, }, A,V) to move the cursor left,
right, up and down on the screen.
Press BKSP to erase information entered on the display, one
character at a time
Press SPACE (in the FUNC state) to enter a blank space.
Press CLEAR to partially or completely escape from an appli-
cation level or screen, CLEAR also erases all entered data
from the screen.
Press ENTER after entering data or a command.
Press CTRL ro perform the control function This key is under
applicarion control.
Press SHIT-T and a key to produce various character keys; refer
to the PDT 75 00 Series Product Reference Guide [or your ter-
minal or your application guide for the keypad mappings
Note: Key functions can be changed by an application. Your
keypad may not function exactly as described above
12
Quick Reference
Using the PDT 1500 Hum Keypad
The 25-key keypad produces the numbers 0-9, function keys F1-
F10 and various action keys,
O The default numeric keypad produces the numbers 0-1
0 Press FUNC and the corresponding numeric key to produce
the function keys F1-F10
0 Press the cursor keys (4, b, A, v l to move the cursor left,
right, up and down on the screen
. Press BACK to erase information entered on the display, one
character at a timer
- Press CLEAR to partially or completely escape from an appli-
cation level or screen, CLEAR also erases all entered data
from the screen
- Press ENTER after entering data or a command,
' Refer to the PDT 7500 Series Product Reference Guide for
your terminal or your application guide for the keypad map—
Pms- ,
Note: Key functions can be changed by an application Your
keypad may not function exactly as described above.
13
PDT 7500 Series
Using the Integrated Laser Scanner
To use the laser scanner:
14
24
Verify the system is on The LED lights yellow if scanning is
enabled and the laser is on.
Aim the PDT 7500 scan window at the bar code and press the
scan buttons
Do not hold the PDT 7500 at a right angle to the bar code
You can tilt the 7500 up to 65° forward or backward and
achieve a successful decodes.
. Ensure that the scan beam crosses all bars and spaces on the
symbol, ns shown below.
Right Wrong
—llll|ll|lllll—
u|zsl§
Hold the scanner farther away for larger symbols, and closer
[or symbols with bars that are close (ogerhen
..zs
The LED turns from yellow to green for successful decodes.
The PDT 7500 may also beep on successful decode.
Scanning PDF4I7 Bar Codes
The PDF417 bar code symbol has multiple rows, but the raster
pattern also has multiple scanning rows. Two basic steps are
required as you scan:
14
Quick Reference
1. Point the scanner at the bar code and press the scan button
Slab Raster
2. As die raster pattern spreads, keep the pattern in the same hor-
izontal plane as the bar code.
->|3/4”|<— N +|31 "|<—
34 The terminal indicates a successful scan by changing the LED
from yellow to green, beeping one or more times, and/or dis-
playing the decoded bar code on the screen.
“Tall" PDF Bar Codes
If the PDF417 symbol is “tall,“ the vertical scan pattern may not be
high enough to cover it.
In this case, try a slow “up and down” scanning morionl With the
raster pattern open, try to move the scanner slowly down toward
the bottom of the symbol, keeping the beam horizontal to the rows,
and then slowly back upward toward the top
15
The scan beam does not have to be perfectly parallel with the top
and bottom ofthe symbol (up to at 4° tiltwill wotki
Using the lmager
To scan a symbol:
1. Press the scan button and center the symbol in any orientation
in (he aiming pattern The entire symbol must be within the
brackets.
Llnnr bar code PDF4|7 symbol
r "I 1—
NW/ \|ll
_l L _l
\ /
Aiming Pawn
2 Hold down the scan button until the image: beeps, indicating
the bar code is decoded
16
Quick Reference
Host Communications
The PDT 7500 Series terminal can communicate with a host PC
either directly through its communications port using in RS-232
serial cable or the cradle, or wirelessly via the Spectrum24® wireless
LANs. For more information on setting up and performing wireless
communications with your PDT 7540 Series terminal, refer to the
PDT 7500 Series Product Reference Guide.
Using the RS-232 Serial Cable
To connect the RS-Z32 serial cable for host communication:
14 Connect the 115-232 serial communication cable’s connector
to the adapter cable’s connector
24 Plug the adapter cable‘s suhminiuture connector into the serial
communication port on the bottom of the terminal.
3A Plug the other end of the RS-232 serial communication cable
into the host PC
44 Begin host communication as specified by your application
Using the Cradle
To communicate through the cradle:
L Make sure all connections between the cradle and the host
computer are secure. See the Quick Reference Guide that
shipped with your cradle for instructions on setting up the cra-
die
2. Power on the host computer, the cradle, and the terminal.
3. Insert the terminal into the cradle,
4 Begin host communications as specified by your applican’onr
Communicating with Printers
The PDT 7500 communicates with huh-compliant peripherals
through the erA interface in the base of the terminal, To print,
point the pm- 7500’s hon port at the erA port on the erA-
compliant printer a maximum distance of39 inches (1 meter) and
17
P D
7500
Series
run the application’s print function Printer communication can also
be established through an RS-232 cable connected directly to the
printer:
Using the Touch Screen
Some PDT 7500 terminals are equipped widi a Touch Screen, which
has software that allows the stylus to function as a mouse. An
optional stylus is available from Symbol for use with the terminal.
Further use of the stylus function is application-dependent Refer to
application documentation for more information.
Troubleshooting
Problem Cause Solution
PDT 7500 does Li-lon battery charge or replace the Li-Ion
not power on,
not charged
battery in (he PDT 7500,
System crash.
Hold PW'R key for 15 seconds.
DOS terminal users may change
this value in Setup.
Rechargeable Battery failed. Replace battery.
Li-Ion battery
did not charge. PDT 7500 re- Insert PDT 7500 in cradle and
moved from cla- begin diargingr The Li-Ion hat-
dlewhile battery nary requires 2-3 hours to re-
was charging. tharge fully,
Cannot sec PDT 7500 not Press the PW'R key.
characters on powered on,
display.
Contrast not ad— Press the blue FUNC key and
justed properly. then the Dad: or Light keys to
adjust contrast,
18
Q u c k R e f e r e n c e
Problem Cause Solution
Scanner does Scanner is not See your System Administrator.
not power on
when the scan
enabledl
button is
preswed.
Scanner does Bar code is un— Verify that the bar code is not
not decode a readable, defective, i,e,, smudged or in
bar code. ken.
Scan window is
dirty.
Clean scan window with a lens
time. Tissues for eyeglasses
work well. Do not use tissues
coated with lotion.
Scan code not
enabled.
See your System Administratol:
Fail to commu~
nicate with
erA printer.
Distance from
printer is more
than 1 meter (39
inches),
Bring the terminal closer to the
printer and attempt communi-
Cations again.
Obstruction in- Check the path to ensure no oh»
terfered with iecu were in the way.
communication.
Application is Primer supper! must be includ-
not enabled to ed with the appliean’on to run
run IrDA print» erA priming on the terminal.
ing, See your System Administrator
19
P D T 7 5 0 O S e r i e s
Prohleln Cause Sol-nim-
The aiming pat Bad cable cone Check rlaar the cable is connecr-
tern does not nection. ed properly.
appear when
the scan human
is pressed» Host power not Be sure the host system power is
on, on (ifexternzl power isn't used).
Laser aiming pa- mine the laser aiming parame-
rarneur not en- la is enabled.
ahleda
The hunger is Symbology dis- Check that the symbology is en»
having trouble abled, abled.
reading
symbolsl Damaged sym- Be sure the symbols aren’t dain-
bol. aged or coared widi (ms: or wa-
ter droplets,
Improperly Besurethe symbol iscompletely
aligned symbol within rlie aiming pamm.
Scanned dam is
displayed incor-
recdy or not at
all.
Improper corn-
munications set-
up.
Check Lint the communications
parameters lbaud, parity, stop
bits) are set properly for the
host.
20
Quick Reference
Serial Communication Port Pin-Outs
Pin Dcwlption
1 GND
2 DSR
3 RXD
4 crs
5 DCD
6 GND
7 PWROUT (05W
8 mmmsv;
9 DTR
10 Ring
11 m
12 RTS
13 Reserved
14 GND
15 PWRIN(+15V]
Ergonomic Recommendations
Cmuion: In order to avoid or minimlze iii: potentixl risk of ergonomic injury follow
lhe mommdaiions below. Consul! widl your local Heakil s: Safcfy Manage: to
ensure rim you no meeting with your mmpany’s safely ployamx m plcvcnl employee
inim
- Reduce or eliminate repetitive motion
- Maintain ; natural position
' Reduce or eliminate excessive force
- Keep obiecis iim are used fiequcmly wiiiiiii aw reach
- Perform mks a! coma my“:
' Reduce ox eliminate vibntion
- Mm or eliminate dim pressure
- Provide adiusublz workman»;
. Provide “1;un clumncc
- Provide i suitable working environment
. Improve work pmcedilm.
21
PDT 7500 QRG
Addendum
Introduction
This Addendum to the PDT 7500 Series Qulck Reference Gulde,
part number 7233588433 Revision A, provides G-1B Radio
regulatory Information for your PDT 7537.
Regulatory lniormatlon
Ail S/mbol devices are designed to be oornplianiwirh rules and regulations in
locations they are sold and will be labeled as required.
Any changes or modifications to Symbol Technologies equipment. not expressly
approved by Symbol Technologies, oouid void lire user‘s authority to operate the
equipment.
Rattle Frequency lnteriorence Requlrements
Note: Thls equipment has been tested and
round to comply wilh the lirnie Tor a Class a
digital devioe, pursuant to Pal115 of the Foo
33:9;22 gct'szm rules. These limits are designed to prwide
reasonable protection against harmful
FOR HOME OR omce use interierenoe in a residential insrallation. This
equlpmefli generates. uses, and can radiate
radio ireguernzy energy and, it not installed
and used in accordance with me instmciions. may cause hanniui inierierenee to radio
oomnruniearlons. However there is no guarantee that interference will not occur in a
particular installation, If lhis equipment does eeuse harrnlui interierenoe to radio or
letevlsion reception. which can be determined by turning lhe eguiprneni errand on,
the user is encouraged to try to correct the interference by one or more at lhe
ioilwving measures:
_ Reorient or relocate the receiving antenna
. increase the separation between the equipment and receiver
e Connect tire equipment into an ouliet on a cirouri dinerenl from that to which the
receiver is connected
. Consult the dealer or an experienoed rediorrv technician for help.
Radio Frequency Inhrferenee Requirements - Canada
This Class B dig’ial apparatus oomplies with canadian lessons.
eeteppareil nunrerique de la ciasee Best contorme a la nonne NMB~O03 du Canada.
This devloe oornpiies with RSS 210 or industry at Serenoe Canada. Operation is
subieot lo the followlng Mo oorrditions: (1) this device may not cause hamliiii
irrtarrererrca and (2) this device mus1 eeoept any interference received, lnoiudlng
interference me“ my cause undesired operation.
This Class a digital apparatus oomplies wiih Canadian ICES-003.
oei appareii numéiique de la ciaase B eetoorrfonna a la nonne NMMDS du Canada.
Label Marking: The Tenn 'tc:' beiore lire radio certification only signifies that industry
Canada technical speoifioations were met.
P D T 7 5 0 0 Q R G
A d d s n d u m
1 Marking and European Economlc Area (EEA)
( . RLAN's (ZAGHz) lor use lhmugh the EEA have ihe lollnwlng resiricttons:
- Maximum radiauad transmll power or 100 mw EIRP In the lrequency range
2.400 -2,4335 GHz
~ Franoe. equipment is remrlcted lo 24405 4.4535 GHz treoueney range
Belgium outside usage, the equipmenl is restricted to 2,460 ques GHz he-
quenw range
- Ilnly requires a user iioenee tor outside usage.
Laser Dew/Ices
A Symbol devices using lasers oompry with us zlcFR1040.1o. and
iEcszs-i:1993. EN60825~1:1994¢A11:1996. The iaserouasslficalion is
marked on one oltl-ie labels on lhe device.
class 1 Laser devices are not considered to be hazardous when used for their
lnleflded purpose. TM iolkming statement is required to wmply with us and
Intemaflcnal regulatlons:
Caution: Use oiwnhols, adjustments 0r perfume or procedures other than those
specified herein may resull in hazardous laser light exposure.
Class 2 laser scanners use a low vowen vlslble light diode. As with any very brlghl
Ilghl source. such as the sun, lhe use! should avoltl slarlng directly Illlto (he Ilghl
beam. Momeniery exposure to a class 2 laser is noi knawn to be harrnlul.
Power Supply
Note: Use only a Symanapprm/ed power supply 5044001005 uulpul rated
15 We and minimum 25 A. The power supptyls certified to EN50950
will! SELV ompuls,
Hlnwels: Benulzen Sie nil! eine Symbol Technologies genehmlgl Siromvevsor-
gung 5044001405 in den Ausgabs: 15 Vdc und minimum 2.5 A Dle
Slwmversnrgunq isl bescheinigl finch ENSUQSO mll SELV Ausgaben
FCC RF Exposure Guidelines
This deviae was tested tor lyplcal bodymmoperaiarevmn the holstarprwiang a
minimal spam 01 05 0m in!“ lhe hodyla “18 back 01 me lennmllernlemls. To
maintain oompliarroewith FOO RFeth-lre oompiianoe mullemenlsntsemlybeh-
dips, holsters, or simiiar aooeeemiestnat maintain a 05 an separetandimroe
betweenlhe users body andth em oftne Ierminal, imtudingihe antennai-he use
at Mmbellcllps. holsters, and similaraweswiae emu not ooniarn metalk
oomponenisin [ls assembly. The use or these awessolles that do not satiatytnesa
requiremem maynot oompiywith FCC RF exposure oorrptianoe mmmemsand
should be avoided
Quick Reference
Scanner Labeling
/ mum (mm
/ Mam-m m
Hump,” mum "ms,
“am-ms“ ‘
mat-Knew m Lwthmmumsw ‘AUTwoN
mun . mu 11 mm :
mm". w mrumvmmm mam-4
:7_ ‘ ’ 17“er
mm H mm mm“!
A A
mmrm Mum-m
melnuun‘mm.
mum-Mme“ swarms
.» mum “9
This label is loaned Inside lhe hungry comparvnent.
04mm - usm new Hutu om. Avon)
wt 1 m (mm.
AHENIVDN , um n: mm in ms o'wvmukf.
"a us REGARDER mus u mscnu.
msxcm - usflmcm. mm ABDICKUNE cfumn.
mm pm 5mm AUSSHZUI
ms nswcz emits mm mu m or M rcn
mes mum IS 5mm 10 m rmwnc m
commas u) ms DEWE! w now most mum
wmsurmmn M7 {73 ms nzwcr mm mm
M mnmxmt a c wmmmmuc wvmznm
M! w uust msmsn wmnw ms cuss A
mum Ammus mmlss mm mum" mum].
on APPAREII win-m1 Di u mssc A 55! swam
A u mm; uw-m um um
SIZE mum mum wwt m1 mam mrmnw
cwuzs wnm zwcmmom a: vow”:
“605254 1990 » A||,|~39S & IR 5254 we;
25
PDT
7500
Series
In numdznc: with Clans: 5' EC 0825 and EN6UBU, the following Information is
provided (0 (he user:
mum
um:
um
mm
mm
mm
mm
cw
mm
W;
mnummmlcr
mum
owemmm-w
mzmmm
mum“:
mum
simmlslum
mnumnm
Atmnmwu
mush murmur“
usenucm
Mum rims-mm!
Mummmnm
1.1mm x mm"):
Luz-mo
mflnwnmnA
mom z ummn
muss-mmm
Lumsmn
musliwmumnnmmm
mumlnscwuz
Minnow“ m mu
mommm om ummmm
Lmnom/n mums:
mm 1m ‘mn 1am
“hr-v4 znm
mm 1m an was 1m
Inmwmafixm
run»!
cum: mmonmnmcmix
mssn mam
mammuecbnom‘m
nun-mm
mm. mmoommm
mm: Lmusmsmxwxuxm
mmmmz
mm!
mum noomuunmwu
cum Luznfiwummlomowumew
moowomumwn
cm: nmmmnntuwh
cum Luzusix
mmmmfimnm
mmamucmn
mm mm|
mm ufimmmmm
mommm
26
Quick Reference
DECLARATION OF CONFORMITY
w-. mud rut-min, ht.
M ommmumwmmmmmmu
dad" awe-Av m mammiw m Inc M
sum-nu Luau. w;- u lulu c..-
;mm maze. m- - nun; cud
smumwmwwll when
to mm mm am Mm. s- m comoml‘iywih nu mm mm mm
all-i mm. 69am
mamm- l'iw-mbwfl"!
m m m Mmmbu nm
En lam: mg ml mm a n
warnmammnmm mmlmhuumhxrflmb’mw mmtmmnmn-M 97mm: in
mmiyh-numl-Hawmmnmmam 1m
mmnmmynuan-mpmufiunm-Mh vnmd-inlsimdmmmmn mm
mm men/w: M bun Mama m. m. mm: Wm Mwa mum Mas»:
mm Chum mun, u Ihhuy mu, mmmmn, KT|2 um
mama-mm» mes vn-wwuwlwmmcfin
7 2 «mm mm
m mmuv dam—film mum m In new. anu‘pmm an be m mil-Ma m
amp-mu nn Milan in-
smquuwl-u EMEA. syn-1 Phat, Mun-um w, mum", m u m ux
num- num-
1m»
om, newhwry am Mme-I a.»
may
Mu «mum
[w Mummy-w 1m;
27
PDT 7500 Series
DECLARATION OF CONFORMITY
Wu, Symbelvschnfiwln Inc.
undu- ma. numb mummy new. mm
Mumml mm. M- - mun-vi
spa-mum mm, w - mm on
mm. at mm mm s h mum-mm m. mm; film?“ mam
Wm mamas-mm
El! mm mwmmt)
m mm (am...- an)
an sum: as: M man-4, 11
W-Imwyd-d-umxumflnmmxmlummmmammdmalmnmmmmm’sin
mmww-mmuuqmnmmmm 1mm
mmmwwm. "Manama. 1015) mad-MM hmxlvofl
mm" 1mcmmmmmmummmummmwmmax
mt, amm- mu... ullnhuy vanm, It“: um
Idnmmhnnmx men mwbmamwnhncmyuctm
7 2 «mm m
mmmul Gum-Man "mm m- .m wubmulun a. mad: mm.»
mm on M w
synod hat-mind” Ema. syn-w mm, mm "mum Mm». m u m ux
mm. mm
(m...)
Dim Raw-way and mi
1. nu mm
(mm- dump-EM) (m)
28
Quick Reference
Note: The following End-User License Agreement applies only
to Windows CE versions of the PDT 7500 terminal,
END-USER uCENsE AGREEMENT FOR MlcEOSOET SOETWARE
MICROSOFT EXPORT SOFTWARE DEVELOPMENT m FOR WINDOWS CE
VERleN 2.11 lReferred to as the “Microeoit Expo“ SDK”)
IMPORTANT-READ CAREFULLY: 11m Mmroaofi End-User License Agreement
("EULA") is a legal agreement between yon (ti-her an individual or n elngleentiryl nnd
Mieroaoft Coxporariol'l {ox the Mieroeon win-1m prodner identified above, whieh
inelndee compnoer sofrwm and may include aeeoeinred media, primed materials, and
“aniline" or electronic documentation l-sOl-TWAEE PRODUCF'L By installing,
copying, or omen-vise using rhe SOFTWARE PRODUCT, yon ayce lo be bound by he
rerme ofthix Em liyon do nor nsree ro rhe terms this EM do nor inernll, copy
or use the SOFTWARE PRODUCT.
SOFTWARE PRODUCT news!
The somwlRE PRODUCT ii protected by copyright laws and internnnonal
copyxighl ueariee, he well as omer inrdleeinnl properry laws and rrenriee. The
SOFTWARE PRODUCT is licensed, not sold.
hurodnerion: The SOFTWARE PRODucr war confignud for yon by a license: of
Mieroroft Windows CE Plariorm Enilder v. 1.11.
For purpom oirhis EULA, the licensee ofMieroeoit Windows CE Platform Builder v.
1.11 is referred eo ne me “Plzrfurm Dzvzlopcx". The SOFrWARE PRODUCT as
delivered to yon hy ihe Platform Developer eontmnr eoitwrre ond doenmentotion from
Microsoft Coxpoulion and may also eonrnin software and doenmeniaoon from he
Plnriorm Developer The eoftvvnre ond doenmenrnnnn from rhe Plarforrn Developer
(“Plzfioxm Developer Componehm and the rernu nnder which yon eon lue eneh
eoieware nnd dnermrrarrnn'on ore set forth helow in a separate end-list! license
agreement provided (0 yon directly {mm the Pin-form Developer (the “Platform
Developer EULA“). Reiereneer to SOFTWARE PRODUCT in this EULA m for the
Micmsoh Expon SDK nnd do nor inelnde Plufuxm Developer CDmponenu.
The Mieroeoit Expo" le< and the Plarform Developer Components my only hnve
been delivered to you in randem with the Platform Developer-s product for Windows
CE developed in accordnnoe wirh rhe Microsoft Windows CE Plarlorni Builder, version
1.11 (‘Pmducl for Windowr CE"). If you uceived me Mieroeoir Export SDK llndn
any other eirernnenanm, yon may not nu the Mievoaoft Export SDK.
L GRANT OF LTCENSE, This EULA gronnr yon rhe following hmired, non-ex-
elusive righn:
a. SOFTWARE PRODUCT. You may inernll and nee rhe ennloeed sOl-T-
WAEE PRODUCT on in single oompnrer for lhe sole pnrpoeer of develop-
ing and neen'ng your software applieoeion for lue with the Prodnet ior
Windovve CE vvieh whinh rhe SOFI'WARE PRODUCT was delivered (“AP
pliernnn for Windowe cm.
b. Sample Code. Yon mny modify rhe eomple ronree eode loeaoed in \Win-
dowe CE ToolelWCEzl llrSDk>Eamplee (where “SDK' is the name ofthe
29
PDT 7500 Series
Plariorrn Developer), (“Sample Code“) to develop, and mt yonr Applica-
rioo for Windows en. You nnay also reprodnce and disrribnre the Sample
Code in obiesrcode form, nloog wirh nny modificmnns yon nuke ro rbe
Sample Code, provided rhar yon comply with rhe Disrribno'on Peanre-
menrs described below. For pnrposes ofrhis secrion, ~rnodilicarions‘ shau
mean enhzmmlems to the hrncrionnliry of rhe Sample Code.
e. Disnibno'on neonirenneno. You may copy and redisrribnoe rhe simple
Code and/or noy modifications yon make icolleeriyely “REDISTRJBU'F
ABLE comm"; zsdescribtd nboye, provided rim in) yon distrib-
nre rhe unlsmlwrulb COMPONENTS only in eoninnco'on wirh,
nod as a pnrr oi, yonr Application for Windows ere (M yonr Application
(or Windows CE adds signifieanr and prinrary inncrionalicy to the REDIS-
TRLBUTABLE COMPONENTS; (c) rhe mlsrmumu coma
NENTS only opernre in conrnncrior. wirli Microeofe Winduws cs; id; yon
do nor permit inrrher redisoibnrion oi rhe REDISTRIBUTABLE cowo-
NENTS by your end-“Sn customers; iel yon do nor use Mitmsofi‘s narne,
logo, or rradernarlo no market yonr Applrcnrion ior Windovvr ere (I) yon
inclnde n valid copyrigbr norice on yonr Application for Windows ex; and
lg] yon hereby agree ro indemnify, hold linrrnlees, and defend Mierosoh
irorn and againre any claim: or lawsuits, inclnding morneye- fees, rhnr
arise or resnlr imm rise us: or dirrribnrioo oiyonr Application for Win-
dows cs. Contact Microsoh (or rhe applicable roy-lries dne and orher I.i-
censing cerrnr for all orher uses nnd/or disrribnrion nf ebe
REDISTRIBU'A‘ABLE COMPONENTS
d. Microsoie reeervrs all righer oor expressly grnored ro yon.
COPYRIGHT All (itle, inclnding but not linnioed lo copyriglns. in and lo rhe
SOFI’WARE mower and any copies thereof are owned by Mierosoie or in
suppliers. All rirle and inrelleernal properry rigirs in and to the conrenr which
rnay be aceeered ihrongh nse oflhe SOFTWARE mower is rhe property of
«he respective comm! owner and may be prooeered by applicable copyright or
orber inreuecrnnl properry laws and rrearies.1'bo EULA granrs yon no righrs ro
nee nub comm. All rights not expresrly granred are reserved by Microsoir,
Therefore, you mils! rreu rhe sorer mower like any orber eopyrighr-
ed niarerinl, exczpt rbnr yml my eirher in» rnalre one copy of rine SOFI'WARE
mower rolely lor backup or archival pnrposes, or lb; inmll elre sorr-
WARE mower on a single eornpnrer. provided yon keep «he original solely
for badenp or ardiival purposs. You may nor copy rbe pximed marerials ac-
companying the sel-Twm mower.
DESCRE’HON or OTHER luci-rrs AND umrrmONs.
n. Lirnieneionr on Revereeliogirieeriog, Decompilarion, and Disosrernbly. You
my nor reveroe- engineer. decomoile, or dlszssnnble rire scl-TWAim
mower. exoepr nnd only no he exeene rim such nco'yiey in expressly
per-mined by applicable law norwirhsranding rbis lirnirarion,
b. No Snpporr. Microsoir does nut provide snpporr for be sci-mm
mower. snpporr, in nny, my be aynrlnble irorn rhe Plnrforrn Develop-
er.
c. Rental. You may not rent, lease or lend Kllt SOFTWARE PRODUCT.
30
Quick Reference
d, Sol-ems Trnnsfen Yon my nor rrnnrfer any ofymn' rights nnder rhis
EULA
e. Terenrnarion, wirhonr prejudice ro any oriser tights, Microsoft may «ermi—
nnre rhis EULA iiyml lnil ro cnmply wim rhe rerrne nnd sondieions oirhis
EULA. ln snoh evtm‘e yon inner desrroy all coyies ofthe SOFTWARE
PRODUCT and all ours oomponenr pins.
4, EXPORT RESTRICTIONS. Yon agree rhar yon will nor exporr or re-enporr rhe
scl-TWARE PRODUCT, any parr theme or any proeerr or serviee rhar is me
direer peodncr of die SOFTWARE PRODUCT (the foregoing colleerively re
ferred ro nr me -Resrriered Componems"), to any eonnrry, penon or eneiry enh-
ice! ro us. exporr resrrierions, You specifically agree nor oo exporr or reenporr
any of rhe Resrriored Componenrs m ro nny oonnrry ro which rlre US. has on-
bugoed or rem-icoed me expon of goods or services, whidl enrrenrly inelnde,
hur are nor neoessnrrly lirnirod ro Cuba, lran, lraq, lihya, North Koxea, Sudan
and Syria, or ro nny nnrional or nny rnoh connrry, wheuvcx locared, who inlendr
w rransmir or rranapon rlre Rearmed Componenrs hack to well connrry; (ii) ro
any enriry who yon lrnow or hnve reason ro lrnow will nrilire rhe Resniered
Componenrs in me design, developmsne or producnon of nnslenr, ohernionl or
hiologioal weapons; or (iii) io any ennry who yon know or have reason ro know
has heen prolnhired imm pnliclpztmg in us. enporr rrnnraorions by any feder-
al zgmcy of die “as, governmenn Yon warranr and repreoenr rhar neimrr me
BXA nor any orlrer US. federal agency has snspended, revoked or denied your
exporr privileges.
5. us. GOVERNMENT RIGHTS. All SOFTWARE pRonucr provided rn me
U. Governmentpmuznno solieirariom issued on ornfeerneoernher l, 1995
is provided with me eonrnreroial rights and mniorions described chew/hm
herein. All sommui PRODUCT provided ro rhe U.sl coverinnenr pnrsnnnr
m solieirariom issned prior In December 1, 1995 is provided wish REsTRlcr-
ED RIGHTS ns provided for in EAR, 4x CFR sun-14 UUNE 1937) or PAR,
45 CFR zsz.zz7-7ou locr 1988), ns applioahle.
MISCELLANEOUS
llyon aeonrred «his produce in rlre Unroed Sea-es, this EULA isgovemed hy rise lawr of
rhe Sm: or thingtonr
Ii yon noonired ehis prodnor in Cannda, rhir EULA is governed by rhe hws of rne
Province oronrarro, Canada Each ofrhe panies hereeo irrevocably atom ro riie
jnrisdierion of rhe oonrrs of rhe Province of 011in and further agrees ro commence
any litigation rhnr mny anne herennder in rhe eonrrs loomed in rile Judicial Disrrior of
York, Province of Onrarro,
lf rhis prodner was aeonrred oursrde she Unired Sum, loeal law may apply.
N0 WARRANTIES, Miorosolr expressly disdain-u any warranry for rhe sor-TWARE
PRODUCT. Th: SOFTWARE PRODUCT and any related domnmnurion is provided
~as is- wiriionr warraney or eondirion of any kind, ehher express or implied, including.
wrrlionr lirnrrarron, rile implied warranrres or eondrnons ol merelianrahiliry, (mien lot
a panicnlar pnrpose, or non infringement. The enrire risk arising our of use or
performance ofthe soFrWARE PRODUCT remains wnll yon,
31
PDT 7500 Series
No LIABIJJTY FOR DAMAGES. In no event shall Microsoft or its suppliers be liable
for any damages whauuvtr (including, wifllout liinimion, damages for loss of
business profits) bmess interruption, loss of business lniormaxlon, or any 1)!th
puunizry loss; arising oul of lloa use mi of ability to usa this Micmsofi pnoousl, mu
il Microsoft has been advised of [he possil, ity ohuch damagtsa Btcauxe some uaus/
jurisdictions do not allow the exclusion or limitation of liability for consequnuial or
incidgmzl dun-lugs, m Above limimlion may no upply to you,
Si vous avzz ncquis vous produlk Microsoft nu CANADA, la gainnns limité: smnuu
vous coumne:
GARANTIE umrés
EXCLUSION DE GARANTIES, Miomsoii isnonos enrlértmenk a route gananxls your
1: LOGlClEL. Le LOGICLELer nouns anus dosunneuianon s'y rappon'znl son! foumu
a comm: ktls . inns aucun: guam’i: quglle qn'zlle sou, “puss: ou lmpllcibe, y
compris, niais n: at limilam p43 aux gaianxias implidm de la qualiré nianshanda,
o'ndapiaiion i un usage puriculiu ou d'abseuoe do viola-ion des anoiis des tiers. Lo
risque mu] découlnm d: l‘ulilisninn on d: h pufonrunu du LOGICIEL est eulre vos
rnnins.
ABSENCE DE mpommim POUR us DOMMAGES, Microsoft ou sex
foumiseun no pom-mm em menus xesponsablu an uncut ckconmnu do (out
dommlg: quel qu'il sou iy compris ninn non dc moo limintiv: 1:1 damngls onans
ouiudixem causé: pail: pem dz béuéficescommexciaux, l'lll mnpfion des afiaim, la
pm: d'informzrion commercial: on ion-s auru pen: pécum no; n'sulnani dc
I'uriliszriou on as l'imposxibiliné d'utilisatlou de ce piouuii, a cs, mains si in mciété
Miuosoiu a éllé avisée dc l'euouinali do Ids dominagia. Pam: qua exuins enaia/
Juridictions u: minimum pas l'extluxion on in limiunon dc (espousubllité nslniiuo zux
donunagss indirect: ou cansécmifi, la limitation ci-dtsslu pent M pas s'appliquer A
Von: 55mi-
Ln yrésemt Convention en régi: on [as lois do lo pnovm fl‘Onnrlo, Cnnadn.
Chacunz des panics a la prélmte rewmuit ixrévocablmlent la compétence dos
uibunaux dc la province d'Onlaxio cl consul! a insriruu loll! lilige qui pom-flit
découler de lo yxésmte nuprés dies tribullxux situés dnns It dimlct judiclnixe dc York,
province d'olniaiio,
32
Quick Reference
Warranty
Symbol Toebnologier, lnc, (“Symbol'i mruulamure us hardware prndm m aoeonlauoe will.
indmr‘yexnndnd prurieeo Symbol wxmms marlora period olrwelye ilzi months irom dare of
shipment, produou wil| be lue from dam in maberialeano wnrkmzmhlp.
11m walnmy ix providtd m the original mrr only and la uol uamlerableeo any rlnrl parry lr shall
run will no my product ii) wiueii bar been repaired or llukd unlme done or approved by Symbol,
in; winch has uor been momma in aoooroanre with znyapcnn'ng or handlllu humliammpplkd
by Symbol which has boon rubipaeel be ununul physic-l oreipomeal 5m“, misube, tbnsze power
shomgr‘ nrmrnoe maxidalk or in; lamb“ bean nerd orberrban maenoroanre mlhdzplodnfl
vpefiking and handling him-unions. Prevenriye maimenanee is eire roeponribilny oi eusromer and is
nor ooyered under this mrrmzy.
Wm nem- auo alumna having a symbol renal uumben will any a ”airy limirro warramy. Non
serialized ioemr will any a 30-day Ilmlled warren-y.
Wurrnnry Coverage ond Pmcadun
Dunn; me warranry period, Symbol will repair or replaoe deiemiye plodllcu rammed m Symbole
manuloauring planr in due us. For wananry rervioe m Norm Amman, all (h: Symbol supporr
Cmul or 1-800-653-5350 humuloml cuuomm mould Corina! are local Symbol off-<9 or rappor-
oenrer liwarranry saryioe isreouireo, Symbol will iaue a Rznml Maierial Audionrauon Number
deiuu mun be an”: n m original or comparable packzsi'lsyshiwingami innurnoe charge!
pkpzid. symbol will rbip me repaired or replareroeur prooner lrenylnauo manna: plqnid m Norrb
Amerir... sbipmu from me Us or omer [cc-lions will be made boll, Symbol‘x mlnuhcml’in:
planr.
symbol will nu ma! nfmbnhcd para arin dimulinn 2nd will own all pan! remand lrorn
repaired prooueu. oruomerwnl pay fol die kphctmzm product in me I! door nor rerurn riie
replmd ymdncl ro Symbol wimin 3 day: oi reoeipz ol ibe replroemeue produa. The procree lor
(ct-ml and customtr‘x chime; will be in mrdana wide Symbvl‘s minnpe Poliey in elm an die
rim of ebr exchange.
eurnuner rerrpo iull reoponaibrliry ior in rolrmre and oar. including ilae appropnare badmp
mereol.
Repel! or lcphczmnl of a product during warranry wlll nor mud (ht angillzl warranry rerm.
Symbul‘s Curiomer soryioe omnin-iml olfere an anay ohm plans, ruei. ae await, depor, or
phone wppon, marean be implzmznlcd oo mlwxmlur': rppeiol opennionul requiremenn and m
avxlhble ara mlmamixl diaeoum ourin. warramy periol
Geneml
Encepr for live warrano‘rr meal above, symbol airelaime all warramiee, “pm or implioo, on
produebe iurnirhpo bereundu. ineluain, without limuauon implied w nonrier nlmzkfixnublll
firms: in: a p.n-icularpnrpoee.1be nareo cxpm mnlnnu mm in olau obl‘ganona or uabrlmrr
on pan of symbol [or dlmys, ineiuoine wirbom Iimiun'un, epeeial, indium or oonrpquenrial
dun-ogre "ism; our ol or in ram-«Zion wirli me use or performance oldie produce.
S¢Ikr‘s liabiliry lor dumps to buyer or orbere resuliin; fmm die uee of any proouer, mail in no way
eoepeel (he pukfin: priee fluid mommy: in ineuneer o mury to pencils or Mme
some eiarre (nr yurnorruorni do not allow me exduxinn M limnarioo ol inrirlemal or eooerouennal
darlings, so the moulding mluriou or limirarson may nor apply ro you
Tmmmwumwh C <0168® maoeoroaruewiebmeciarrnprodurr
roouiremeure specified in the mm Dirperiye,1999/5/llc
The eouiprnenr ir imznded lor use mrouyiour me Europnn Communiry, bui in aumoruurion lor
ure m Flam: u rmich ar (allow:
. PAN European Flequency xao Am , “an GH:
- Rmricled annency king: lor uoe Franoe; 2.44: - use GHz
33
Service Information
Beioxe you use the unit, in mm! be configured m opens: in your fadliry's netwoxk and
run your ayplicalions.
lfyml hxv: . problun running your 1111110! 115ng your equipment, tonmctymn
ladlity'x Technical or Syuenn Suppon. H mm 1: a problem wnh (he equipment, they
will Contact the Symbnl 5nppon Cum;
United States 1-800653-5350 Canadi 905-629»7226
Unwed ngdom 0800 323 2424 Ash/Pzdflc 337-6588
Australia 1-800-671-906 Aumn 1-505-5794
Dmmzlk 7020-1718 Finland 5 5407 580
Fume 0140-96-52-21 Germany 607449020
ltzly 2484441 Mexico 575201835
Nnhexlands 315471700 Norway 66810600
Somh Ame: 114405668 Spain 94420-39439
Sweden 84452900
Lalin America Sales Suppon 1-8006470178 Inside US
46614834275 Outside US
Enmpe/md-Eannimibnmx 0pmlion5 Comm local dimibnmx or cnll
444 208 945 7364)
IHIIIIIHIIHIIlII IIIIH |1|| lllllllll
mum;
Rethon A — Seytember 1000
Symbol Technologies, Inc. One Symbol Plaza Holtsville, NY 11742-1300
smemem of Compliance for radio devices imegmed Into ienninais
Symbol Technologies, Inc.. hereby, dedslss Ina! this device is in compliance with (he
enemisl requirements and other relevant provisions Of Directlves 1399/5/EC, 391
336/EEC and 73/23/EEC. Declaraiiori of Coniormiiias may be obtained from hum/I
wwm.symboi.eomldod
Siaiement of Compliance for lion-radlo dovlcos
Symbol Technologies, I . hereby declares mums device is in wmpiianee wiin all
«in applicable Dirocn'vos. mas/EEC. nae/EEC, A Deolaraiion of conformiiy may
be obtained imm Mtpzllwwwlsymbnlxomldnc/
other Countries
All 24an Radio Devices:
~ Mexloo - Restilcl Frequemy Range to A50 - 2.4535 GHx.
. ismei - Resmct Frequency Range io. 2.410 » 2.457 em.
~ sn Larika - Restrict Fiequency Ranga in: 2.400 - 2.430 GHx.
|HI|I|I|i|I|I|III I|||I|I|i||H|||i|
72-5781Bv01
Rowlilon A — Jun. 2002
Symbol Technologies, Inc. One Symbol Plaza Hoitsviiie, NY 11742-1300
unp:/Mww.symisoicom/manuais
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2002:07:24 15:29:15-03:00 Create Date : 2002:07:24 15:28:56-03:00 Creator : Acrobat 5.0 Scan Plug-in for Windows Page Count : 36 Mod Date : 2002:07:24 15:29:15-03:00 Creation Date : 2002:07:24 15:28:56-03:00 Producer : Acrobat 5.0 Scan Plug-in for Windows Metadata Date : 2002:07:24 15:29:15-03:00EXIF Metadata provided by EXIF.tools