Symbol Technologies PDT8056 Body worn PC with wireless comms User Manual

Symbol Technologies Inc Body worn PC with wireless comms

Quick Reference guide

Download: Symbol Technologies PDT8056 Body worn PC with wireless comms User Manual
Mirror Download [FCC.gov]Symbol Technologies PDT8056 Body worn PC with wireless comms User Manual
Document ID316699
Application IDEK2MbypNDwoQUft15YmsYw==
Document DescriptionQuick Reference guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize68.07kB (850837 bits)
Date Submitted2003-04-09 00:00:00
Date Available2003-04-09 00:00:00
Creation Date1998-04-30 11:22:54
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-03-24 09:56:14
Document TitleUntitled Document
Document CreatorFrameMaker 7.0

se
lU
na
nt
er
rI
Fo
nl
P D T
8 0 X X
W W A N
lU
se
nl
© 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability,
function, or design.
Symbol does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Symbol products might be used. An
implied license only exists for equipment, circuits, and subsystems contained in Symbol
products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc.
Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Fo
rI
nt
er
na
Patents
This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;
4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281;
4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461;
5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149;
5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791;
5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163;
5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361; 5,367,151;
5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140;
5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949;
5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621;
5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679;
5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803;
5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153;
5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731;
5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050;
5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146;
5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659;
5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098; 6,047,892;
6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482;
6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265;
6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681;
6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061;
6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587;
6,340,114; 6,340,115; 6,340,119; 6,348,773; 6,380,949; 6,394,355; D305,885; D341,584;
D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250;
D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035;
D430,158; D430,159; D431,562; D436,104.
Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796;
1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK
2,072,832; France 81/03938; Italy 1,138,713
rev. 06/02
Q u i c k
R e f e r e n c e
Introduction
na
lU
se
nl
Congratulations on your purchase of Symbol Technologies’ PDT
8000 WAN Terminal! Its unique combination of features make this
product superior for use in a wide range of applications. These
features include:
• Microsoft® Windows® Pocket PC 2002 operating system
• RF communication via a wide area network (PDT 8037/
8056) or Symbol’s Spectrum24® wireless
network (PDT 8056)
• USB Client
• 1-Dimensional barcode scanning capability
• 3.9 inch 1/4 VGA Color LCD
• Touch screen
• Printing support
• IrDA-compliant interface for printing and communications.
About This Guide
Fo
rI
nt
er
This guide describes how to set up and use the terminal. Within
this guide, the term PDT 8000 refers to the Spectrum24/WAN and
WAN only versions of the terminal.
Specific topics covered include:
• Accessories on page 3
• Parts of the Terminal on page 4
• Installing the SIM Card on page 6
• Inserting a Compact Flash Storage Card (PDT 8037 only) on
page 7
• Removing a Compact Flash Storage Card on page 7
• Inserting an MMC/SD Storage Card on page 8
• Removing an MMC/SD Storage Card on page 8
• Installing Batteries on page 9
• Charging the Battery on page 10
• Starting the Terminal on page 12
• Adjusting the Backlight on page 14
• Using a Headset on page 14
W W A N
se
nl
Using the Keyboard on page 15
Using the Stylus on page 16
Today Screen on page 17
Navigation Bar and Command Bar on page 18
Input Methods on page 19
Scanning with the Terminal on page 22
Resetting Your Terminal on page 22
Host Communications on page 23
LED Indicators on page 24
Maintaining the Terminal on page 25
Troubleshooting on page 26
Regulatory Information on page 33
Service Information on backcover.
lU
•
•
•
•
•
•
•
•
•
•
•
•
•
8 0 X X
P D T
Fo
rI
nt
er
na
The PDT 8000 Series Product Reference Guide (p/n 72-58169-xx)
details the applications available for the terminal. For the latest
version of this guide go to: http://www.symbol.com/manuals.
Q u i c k
R e f e r e n c e
Accessories
Fo
rI
nt
er
na
lU
se
nl
Each terminal requires one 7.4 volt 1130 mAh prismatic lithium-ion
battery. The following optional accessories are available from
Symbol Technologies:
• Additional lithium-ion battery (p/n 21-54882-01)
• Stylus for performing pen functions (11-55475-05)
• Cables:
- Snap-On DEX cable (p/n CBL-8000-100-DEX)
- Snap-On Autocharger (p/n VCA8000-01)
- Snap-On Printer cable (p/n CBL-8000-100-INT1, CBL8000-100-CTC, CBL-8000-100-PAX, CBL-8000-100ON1)
- Serial Charging Cable (p/n 25-55853-01)
- USB Charging Cable (p/n 25-59272-01)
- Power Supply with cables (p/n CBL-8000-100U)
• Snap-On Modem Module (p/n MDM8000-xxx)
• Magnetic Stripe Reader (p/n MSR 8000)
• Single-Slot Serial Cradle (p/n CRD8000-1000S)
• Single-Slot Modem Cradle (p/n CRD8000-1000M)
• Four-Slot Charging Cradle (p/n CHS8000-4000C,
CHS8000-4000B)
• Four-Slot USB-to-Ethernet Cradle (p/n CRD8000-4000E)
• Vehicle Cradle (p/n VCD 8000-R000)
• Holster (p/n 11-57530-02).
P D T
8 0 X X
W W A N
Parts of the Terminal
nl
Scan
LED
Ruggedized End Cap
(PDT 8056 only)
Charge
LED
se
Microphone
Speaker
rI
nt
er
na
lU
TFT LCD
(color)
Power
Button
Fo
PDT 8037
Front View
Top View
1-D Exit
Window
Audio Jack
PDT 8056
Q u i c k
R e f e r e n c e
Parts of the Terminal (continued)
Side View
IrDA Port
nl
Back View
Scan
Button
lU
se
Scan
Button
Battery
Door
Bottom View
Fo
rI
nt
er
Stylus
na
Handstrap
Serial & USB
Charge Port
P D T
8 0 X X
W W A N
Installing the SIM Card
se
nl
1. Slide the latches on the battery door up and lift the battery
door away from the terminal. If the battery is installed, remove it (see Installing Batteries on page 9).
2. Slide the metal clip on the SIM cardholder door to the left to release the
SIM cardholder.
na
lU
3. Lift the cardholder door to an upright
position
nt
er
4. Insert the card between the cardholder
body and the metal clip; be sure the
beveled corner of the SIM card is on
the top left.
rI
SIM Card
Contact Area
Fo
5. Close the cardholder door (with the
contact area of the card facing down).
6. Slide the metal clip to the right to lock it
in place.
7. Reinsert the battery and replace the
battery door (see Installing Batteries on
page 9).
Q u i c k
R e f e r e n c e
Inserting a Compact Flash Storage Card
(PDT 8037 only)
lU
se
nl
The PDT 8037 has a slot for a compact flash storage card which
includes a compartment door that prevents the card from coming
out if the terminal is dropped. To insert a compact flash card:
1. Unscrew and remove the compact flash storage card compartment door on the top of the terminal.
nt
er
na
2. Insert a new compact flash storage card into the compartment. Ensure it is fully inserted for proper operation.
3. Screw the compartment door back on.
rI
Removing a Compact Flash Storage Card
Fo
1. Unscrew and remove the compact flash storage card compartment door on the top of the terminal.
2. Use the stylus to press the flash card release button inside
the flash card compartment. The card pops out.
P D T
8 0 X X
W W A N
Inserting an MMC/SD Storage Card
se
nl
The terminal has a slot for an MMC/SD storage card which
includes a compartment door that prevents the card from coming
out if the terminal is dropped. To insert an MMC/SD storage card:
1. Unscrew and remove the card compartment door on the top
of the terminal.
PDT8056
lU
PDT8037
nt
er
na
2. Insert a new MMC/SD storage card, with the card label facing down, into the compartment. Ensure it is fully inserted for
proper operation.
3. Screw the compartment door back on.
rI
Removing an MMC/SD Storage Card
Fo
1. Unscrew and remove the card compartment door on the top
of the terminal.
2. Using the stylus, push against the MMC/SD storage card to
activate it’s spring release mechanism. The card pops out.
Q u i c k
R e f e r e n c e
Installing Batteries
nl
1. Remove the battery door.
se
2. Slide the latches on both sides of the battery down, to ensure
they are in the unlock position. Insert the battery into the
compartment.
nt
er
na
lU
Battery
Latches
Fo
rI
3. Lock the battery into place by sliding the latches on the battery up.
4. Replace the battery door.
Caution:
Do not expose the battery to temperatures in excess of
140°F (60°C). Do not disassemble, incinerate, or short
circuit the battery.
P D T
8 0 X X
W W A N
Charging the Battery
Charging the Main Battery and Memory Backup Battery
lU
se
nl
Before using your terminal for the first time, charge the lithium-ion
battery in the terminal for approximately four hours, using the
Serial Charging Cable or any other appropriate accessory.
Your terminal is equipped with a memory backup battery which
automatically charges from the fully-charged lithium-ion battery.
This backup battery retains data in memory when the terminal’s
battery is removed, and can take up to 20 hours to charge when
you first use your terminal.
Note: If you remove your lithium-ion battery before the backup battery is fully charged, data may be lost. For this
reason, DO NOT remove the battery before the backup
battery is fully charged, which can take up to 20 hours.
Fo
rI
nt
er
na
Charging the Battery Using the Serial Charging Cable
Serial Charging
Cable
10
Q u i c k
R e f e r e n c e
nl
The terminal charge LED blinks amber to indicate that the terminal
battery is charging and turns solid amber when charging is
complete. The battery fully charges in less than four hours. See
LED Indicators on page 24 for other indications.
lU
se
Charging the Battery Using the USB Charging Cable
rI
nt
er
na
USB Charging
Cable
Fo
The terminal charge LED blinks amber to indicate that the terminal
battery is charging and turns solid amber when charging is
complete. The battery fully charges in less than four hours. See
LED Indicators on page 24 for other indications.
Charging the Battery Using a Cradle
You can charge the main battery using the CRD 8000-1000S,
CRD 8000-1000M, CHS 8000-4000C/B, CRD 8000-4000E or
VCD 8000-R000. For more information, see the setup instructions
in the respective Quick Reference Guides.
11
P D T
W W A N
You can also charge the battery using the MDM 8000,
VCA 8000-01 or MSR 8000. For more information, see
the setup instructions in the respective Quick Reference Guides.
nl
Note:
8 0 X X
Charging the Spare Battery
You can also use a UBC Adaptor (p/n 21-32665-33) to
charge spare batteries. Refer to the UBC 2000 Universal Battery Charge Product Guide for more information.
na
Starting the Terminal
lU
Note:
se
You can charge a spare battery using the CRD 8000-1000S, CRD
8000-1000M, CHS 8000-4000B, CRD 8000-4000E or VCD 8000R000. For more information, see the setup instructions in the
respective Quick Reference Guides.
nt
er
Press the red power button to turn the terminal on. If the terminal
does not power on see Troubleshooting on page 26.
Fo
rI
Power
Button
As the terminal initializes its unique Flash File system, the Symbol
splash screen displays for about 60 seconds. When the Welcome
screen appears, tap anywhere on the screen to continue to the
Align screen. Note that these screens also appear every time you
perform a hard reset.
12
Q u i c k
R e f e r e n c e
Aligning the Screen
nt
er
na
lU
se
nl
To align your terminal so the cursor on the touch screen aligns with
the tip of your stylus:
1. If necessary, adjust the contrast on the terminal so the
screen is readable (see Adjusting the Backlight on page 14).
2. Remove the stylus from the handstrap of the terminal.
3. Tap the center of each target that appears on the Calibration
screen with the tip of the stylus.
rI
4. Follow the directions on the screen which explains how to
use the stylus and pop-up menus, and allows you to set your
city and time zone.
Fo
Note:
To align your screen at anytime, press Shift + 2 to
launch the calibration screen.
Initiating a Network Connection
Before using the terminal, set up the Spectrum24, GPRS (General
Packet Radio Service) or GSM (Global System for Mobile
Communication) network connection. Refer to the PDT 8000
Series Product Reference Guide for setup instructions.
13
P D T
8 0 X X
W W A N
Adjusting the Backlight
Description
nl
Keys
Use the key combinations below to adjust the backlight.
Turn backlight on or off.
Shift + Left Arrow
Decrease backlight (decrease brightness)
Shift + Right Arrow
Increase backlight (increase brightness)
se
Shift + App Key 2 or
Shift + App Key 3
Using a Headset
Fo
rI
nt
er
na
lU
Your terminal is equipped with an audio connector which can be
connected to a headset. To use the headset, plug the headset jack
into the audio connector on the top of the terminal.
Symbol recommends a 2.5mm jack headset, p/n 50-11300-050.
Note:
PDT8037
PDT8056
GSM audio is only available through the headset. For
GSM information, refer to the PDT 8000 Series Product Reference Guide.
For more detailed headset information, refer to the PDT 8000
Series Product Reference Guide.
14
Q u i c k
R e f e r e n c e
Using the Keyboard
Key functions can be changed by an application. Your
keyboard may not function exactly as described. For
more detailed keyboard information, refer to the PDT
8000 Series Product Reference Guide.
nl
Note:
Page-up &
Down Keys
Enter/Yes
Key
Backspace
Key
Bottom Key
Previous
Key
rI
Shift Key
Top Key
Tab Key
Fo
Right
Arrow Key
App
Key 3
nt
er
Clear Key
na
Power Key
App
Key 2
App
Key 1
lU
Left Arrow
Key
se
The keyboard uses a numeric keypad that produces the numbers
(0-9) and assorted functions. The keyboard is color-coded to
indicate particular actions that are produced when the modifier
(Shift) key is pressed. The keyboard default is numeric, producing
numbers.
Next Key
No Key
Key
Action
App Key 1
Launches application assigned to Button 1. Refer to the PDT
8000 Series Product Reference Guide for more information on
assigning applications to button.
App Key 2
Press the App Key 2 key to launch the Inbox application.
Also see Adjusting the Backlight on page 14.
15
P D T
8 0 X X
Key
W W A N
Action
Launches application assigned to Button 3. Refer to the PDT
8000 Series Product Reference Guide for more information on
assigning applications to button.
Also see Adjusting the Backlight on page 14.
Backspace
Press Shift + 7 to erase information entered on the display, one
character at a time.
nl
App Key 3
Press Shift + 9. Action is application dependent.
Clear
Press Shift + 1. Action is application dependent.
Enter/Yes
Press Enter after entering data or a command.
se
Bottom
See Adjusting the Backlight on page 14.
Action is application dependent.
No
Press Shift + 0. Action is application dependent.
Page-up and
Down
Press Shift + Up Arrow. Action is application dependent.
Press Shift + Down Arrow. Action is application dependent.
Power
Press Power to suspend/resume the terminal.
See Starting the Terminal on page 12.
Previous
Action is application dependent.
nt
er
na
lU
Left Arrow
Next
Right Arrow
See Adjusting the Backlight on page 14.
Shift
Press Shift, then another key to produce the function above
that key (shown in blue). See individual key descriptions in this
table for additional Shift key usage.
Tab
rI
Top
Press Tab to move from field to field.
Press Shift + 3. Action is application dependent.
Fo
Using the Stylus
The stylus selects items and enters information. The stylus
functions as a mouse.
• Tap: Touch the screen once with the stylus to open items and
select options.
• Drag: Hold the stylus on the screen and drag across the
screen to select text and images. Drag in a list to select multiple items.
• Tap-and-hold: Tap and hold the stylus on an item to see a
16
Q u i c k
R e f e r e n c e
list of actions available for that item. On the pop-up menu
that appears, tap the action you want to perform.
nl
Today Screen
When you turn on your terminal for the first time each day (or after
4 hours of inactivity), the Today screen appears. You can also
display it by tapping Start - Today. On the Today screen, you can
see important information for the day.
Tap to change volume
or mute all sounds.
se
Tap to switch
to a program.
lU
Tap to change date and time.
Your day at a glance.
Fo
rI
nt
er
na
Tap to open an item.
Tap to create
a new item.
Note:
Tap to view connection status.
Today screen may vary depending on your terminal
configuration.
The Today Screen is customizable. Tap Start - Settings - Today.
Use the Appearance tab to customize the background and the
17
P D T
8 0 X X
W W A N
Items tab to change the list and order of items that appear on the
screen.
nl
Navigation Bar and Command Bar
The navigation bar at the top of the screen displays the active
program and current time, and allows you to switch to programs
and close screens. The command bar at the bottom of the screen
contains menus and buttons to perform tasks in programs.
Tap to switch
to a program.
se
Tap to change the volume
or mute the device.
na
lU
Tap to quickly select a program
you have recently used.
Tap to see additional programs.
Tap to customize the device.
Fo
rI
nt
er
Tap to select a program.
New button.
Input panel button.
Menu Buttons.
names.
The Start Menu is customizable. Tap Start - Settings - Menus. Use
the Start Menu tab to check what items should appear on the
menu.
18
Q u i c k
R e f e r e n c e
Input Methods
nl
Enter information in any program by typing with the keyboard, or
use the input panel to type with the soft keyboard, write using
Block Recognizer, Letter Recognizer or Transcriber. In any case,
the characters appear as typed text on the screen.
To show or hide the input panel, tap the Input Panel button. Tap the
arrow next to this button to view input methods.
se
Select input method settings.
lU
Select an input method.
Tap to see your choices.
na
Input Panel button.
nt
er
When you use the input panel, your terminal anticipates the word
you are typing or writing and displays it above the input panel.
When you tap the displayed word, it is inserted into your text at the
insertion point. The more you use your terminal, the more words it
learns to anticipate.
rI
Using the Soft Keyboard
1. Tap the arrow next to the Input Panel button, then Keyboard.
Fo
Tap here if this is
the right word.
2. On the soft keyboard, tap the keys with your stylus.
19
P D T
8 0 X X
W W A N
se
nl
Using the Block Recognizer
1. Tap the arrow next to the Input Panel button, then Block Recognizer.
lU
2. Write a letter in the left side of the box, or a number in the
right side, using special character strokes.
na
When you write a letter, it is converted to typed text on the screen.
For instructions on entering Block Recognizer characters, with
Block Recognizer open, tap the question mark next to the writing
area, or see Block Recognizer Characters on page 21.
Fo
rI
nt
er
Using the Letter Recognizer
1. Tap the arrow next to the Input Panel button, then Letter Recognizer.
2. Write letters or numbers in the writing area, just as you would
on paper. Write capital letters in the left side of the box, numbers in the right side, and lower case letters in the center.
When you write a letter, it is converted to typed text on the screen.
For instructions on using Letter Recognizer, with Letter
Recognizer open, tap the question mark next to the writing area.
20
R e f e r e n c e
nl
Using the Transcriber
1. Tap the arrow next to the Input Panel button, then
Transcriber.
Q u i c k
se
2. Write anywhere on the screen. What you write on the screen
will be converted to text.
Fo
rI
nt
er
na
lU
Block Recognizer Characters
The following chart is a partial display of the characters you can
write while using the Block Recognizer (the dot on each character
is the starting point for writing).
21
P D T
8 0 X X
W W A N
Scanning with the Terminal
nl
The terminal has an integrated scanner which collects data by
scanning bar codes. Refer to the PDT 8000 Series Product
Reference Guide for information on configuring your terminal for
scanning.
nt
er
na
lU
se
To scan bar codes with the terminal:
1. Launch the terminal’s scanning application.
The scanning application is part of the Windows CE Software
Developer’s Kit for Symbol Terminals, available at
http://devzone.symbol.com.
2. Aim the scanner at the bar code, as shown below (PDT 8056
shown).
3. Press the scan trigger. Ensure the red scan beam covers the
entire bar code. The green scan LED lights and a beep
sounds to indicate a successful decode.
rI
Resetting Your Terminal
If your terminal stops responding to input, reset it.
Fo
Performing a Soft Reset
A soft reset restarts the terminal and retains all stored records and
entries.
Caution:
Files open during a soft reset may not be retained.
DO NOT perform a soft reset if the terminal is suspended. Press the Power button to wake the terminal.
22
Q u i c k
R e f e r e n c e
To perform a soft reset press and hold the power key (for
approximately ten seconds) and release it as soon as the screen
changes and the terminal begins to reboot.
nl
Performing a Hard Reset
na
Remove the battery door.
Press and release Power Key + Scan Button.
Replace the battery door.
As the terminal reboots, the Symbol splash screen displays
for about 60 seconds.
5. Realign the screen as described on page 13.
nt
er
1.
2.
3.
4.
lU
se
A hard reset also restarts your terminal, but erases all stored
records and entries in RAM. Therefore, never perform a hard reset
unless a soft reset does not solve your problem.
Note: With a hard reset, formats, preferences, date and time,
and other settings are restored to their factory default
settings.
You can restore any data previously synchronized with
your computer during the next ActiveSync operation.
Refer to the PDT 8000 Series Product Reference
Guide.
rI
Host Communications
Fo
The terminal can communicate with a host computer either directly
through its serial port, USB port, IrDA port, or wirelessly via the
wide area network or the Spectrum24® wireless LAN. For more
information on setting up and performing communications with
your terminal, refer to the PDT 8000 Series Product Reference
Guide.
Using the Accessories
The terminal can communicate with a host computer using the
Serial Charging Cable, the USB Charging Cable, the Single-Slot
Serial Cradle, the Single-Slot Modem Cradle, the Four-Slot USB23
P D T
8 0 X X
W W A N
to-Ethernet Cradle, the Vehicle Cradle or the Snap-On-Modem.
For more information, see the communication instructions in the
PDT 8000 Series Product Reference Guide.
nl
Communicating with Printers
se
To print from a standard printer:
1. Attach the appropriate snap-on-printer cable to the serial
port in the bottom of the terminal.
2. Attach the other end of the cable to the Data Communications Connector on the printer.
3. Run the application’s print function.
The terminal must have software configured to communicate with the printer you are using.
nt
er
Note:
na
lU
To print from an IrDA-compliant printer:
1. Point the IrDA port on the side of the terminal at the IrDA port
on the printer, at a maximum distance of 39 inches.
2. Run the application’s print function.
LED Indicators
LED
Indicator
Charge LED - Amber
rI
Off
Not connected to charger.
Terminal is charging.
Fast blinking amber
Error in charging.
Solid amber
Charging is complete.
Fo
Slow blinking amber
Scan LED
Off
Not scanning.
Solid red
Laser enabled. Scanning in process.
Solid green
Successful decode.
24
Q u i c k
R e f e r e n c e
Maintaining the Terminal
Do not scratch the screen. Use the supplied stylus or plastictipped pens intended for use with a touch-sensitive screen.
Never use a pen or pencil or other sharp object on the
screen.
Although your terminal is water and dust resistant, do not expose it to rain or moisture for an extended period of time.
The touch-sensitive screen of your terminal contains glass.
Do not drop your terminal or subject it to strong impact.
Protect your terminal from temperature extremes. Do not
leave it on the dashboard of a car on a hot day, and keep it
away from heat sources.
Do not store or use your terminal in any location that is extremely dusty, damp or wet.
If the surface of the terminal screen becomes soiled, clean it
with a soft cloth moistened with a diluted window-cleaning
solution.
•
•
na
•
se
•
lU
•
nl
•
Using the holster
Fo
rI
nt
er
An optional holster, to store the terminal when
not in use, is available through Symbol. Hook
the holster on to your belt and insert the
terminal, with the display facing you, as shown.
25
P D T
8 0 X X
W W A N
Solution
Battery not installed
properly.
Ensure battery is installed properly.
See Installing Batteries on page 9.
System crash.
Perform a hard reset. See Resetting
Your Terminal on page 22.
Battery failed.
Replace battery. If your terminal still
does not operate, try a soft reset, then
a hard reset; see Resetting Your
Terminal on page 22.
nl
Charge or replace the lithium-ion
battery in the terminal.
se
Rechargeable
lithium-ion battery
did not charge.
Cause
Lithium-ion battery
not charged.
lU
Problem
Terminal does not
turn on.
Troubleshooting
Insert terminal in cradle and begin
charging. The lithium-ion battery
requires up to four hours to recharge
fully.
Cannot see
characters on
display.
Terminal not
powered on.
Press the Power key.
During data
communication,
no data was
transmitted, or
transmitted data
was incomplete.
Terminal removed
from cradle during
communications.
Replace the terminal in the cradle and
re-transmit.
Incorrect cable
configuration.
See your System Administrator.
Communication
software was
incorrectly installed
or configured.
Perform setup as described in the
PDT 8000 Series Product Reference
Guide.
Volume setting is
low or turned off.
Check the System Volume slider in the
Sounds & Notifications properties
dialog box (under Start - Settings) to
ensure the volume is set to an
adequate level.
rI
nt
er
na
Terminal removed
from cradle while
battery was
charging.
Fo
No sound is
audible.
26
Q u i c k
Solution
Terminal is inactive.
Your terminal turns off after a period of
inactivity. This period can be set from
one to five minutes, in one-minute
intervals. Check the Power dialog box
(in the System tab under Start/
Settings), and change the setting if
you need a longer delay before the
automatic shutoff feature activates.
Terminal doesn’t
recognize my
handwriting.
Character strokes
written incorrectly
with the stylus.
For your terminal to recognize
handwriting input with the stylus,
characters must be written a certain
way. See the PDT 8000 Series
Product Reference Guide for
information about how to write
character strokes.
se
nl
Cause
Terminal turns
itself off.
lU
Problem
R e f e r e n c e
Make the character strokes in the
lower character entry area on the
screen — not on the display part of the
screen.
Lower-case and
upper-case letters,
and numbers written
on the wrong parts
of the LCD screen.
Ensure you are writing letters and
numbers in the correct part of the LCD
screen. See Using the Block
Recognizer on page 20 or Using the
Letter Recognizer on page 20
depending on what input method you
are using.
Terminal does not
respond to a hard
reset.
Battery door is
attached.
You must remove the battery door
before performing a hard reset.
Battery is not
charged.
Charge the terminal. See Charging
the Battery on page 10.
Tapping the
screen buttons or
icons does not
activate the
corresponding
feature.
LCD screen not
aligned correctly.
Align the screen. See Aligning the
Screen on page 13.
Fo
rI
nt
er
na
Character strokes
written on the wrong
part of the LCD
screen.
27
P D T
Cause
Solution
Delete unused memos and records.
You can save these records on your
computer.
Memory allocation
too low.
Adjust the memory allocation. Select
Start, then Settings, and select the
System tab. Tap Memory and adjust
the slider.
Too many
applications
installed on the
terminal.
If you have installed additional
applications on your terminal, remove
them to recover memory. Select Start,
then Settings, and select the System
tab. Tap Remove Programs, select
the unused program and tap Remove.
se
nl
Too many files
stored on the
terminal.
Distance from
printer is between 5
inches and 39
inches.
Bring the terminal closer to the printer
or move it further away and attempt
communications again.
na
Fail to
communicate with
IrDA printer.
W W A N
lU
Problem
A message
appears stating
that your
terminal’s
memory is full.
8 0 X X
Check the path to ensure no objects
were in the way.
Application is not
enabled to run IrDA
printing.
Printer support must be included with
the application to run IrDA printing on
the terminal. See your System
Administrator.
Not enough free
memory available
for receiving data.
Your terminal requires at least twice
the amount of memory available as
the data you are receiving. For
example, if you are receiving a 30K
application, you must have at least
60K free.
Terminals too close
together or too far
apart.
Confirm that the terminals are at least
5 inches and at most 39 inches apart.
Also ensure that there is a clear path
between the two devices.
Insufficient room
lighting.
Adjust the room lighting or move to a
different location.
nt
er
Obstruction
interfered with
communication.
Fo
rI
When receiving
beamed data an
out of memory
message
appears.
Beamed data
does not transmit.
28
Q u i c k
Cause
Solution
Verify that the unit is loaded with a
scanning application. See your
System Administrator.
Unreadable bar
code.
Ensure the symbol is not defaced.
Distance between
exit window and bar
code is incorrect.
Ensure you are within proper scanning
range.
Terminal is not
programmed for the
bar code.
Ensure the terminal is programmed to
accept the type of bar code you are
scanning.
Terminal is not
programmed to
generate a beep.
If you are expecting a beep on a good
decode and don’t hear one, check that
the application is set to generate a
beep on good decode.
Battery is low.
If the scanner stops emitting a laser
beam when you press the trigger,
check your battery level.
Note: If the scanner is still not reading
symbols, contact your distributor or
Symbol Technologies.
nl
Scanning
application is not
loaded.
Fo
rI
nt
er
na
lU
se
Problem
Your terminal
does not accept
scan input.
R e f e r e n c e
29
P D T
8 0 X X
W W A N
END-USER LICENSE AGREEMENT
nt
er
na
lU
se
nl
MICROSOFT WINDOWS FOR POCKET PC
DATA EXCHANGE COMPONENT: MICROSOFT ACTIVESYNC, VERSION 3.1
IMPORTANT-READ CAREFULLY: This End-User License Agreement (“EULA”) is a
legal agreement between you (either an individual or a single entity) and the
manufacturer (“Manufacturer”) of the special purpose computing device (“SYSTEM”)
with which you acquired the Microsoft software product(s) identified above
(“SOFTWARE”). The SOFTWARE includes computer software, the associated
media, any printed materials, and any “online” or electronic documentation. Any
software provided along with the SOFTWARE that is associated with a separate enduser license agreement is licensed to you under the terms of that license agreement.
By installing, copying, downloading, accessing, or otherwise using the SOFTWARE,
you agree to be bound by the terms of this EULA. If you do not agree to the terms of
this EULA, Manufacturer and Microsoft Licensing, Inc. (“MS”) are unwilling to license
the SOFTWARE to you. In such event, you may not use or copy the SOFTWARE, and
you should promptly contact Manufacturer for instructions on return of the unused
product(s) in accordance with Manufacturer's return policies.
SOFTWARE LICENSE
The SOFTWARE is protected by copyright laws and international copyright treaties,
as well as other intellectual property laws and treaties. The SOFTWARE is licensed,
not sold.
1. GRANT OF LICENSE. SOFTWARE includes software already installed on the
SYSTEM (“SYSTEM Software”) and, if included in the SYSTEM package, software contained on the CD-ROM disc labeled “Desktop Software for Microsoft
Windows CE Microsoft ActiveSync 3.1” (“Desktop Software”). This EULA grants
you the following rights to the SOFTWARE:
• SYSTEM Software. You may use the SYSTEM Software as installed on the
SYSTEM.
Fo
rI
• Desktop Software. If Desktop Software is included with your SYSTEM, you
may install and use the Data Exchange component identified above on one (1)
or more computers to exchange information with one (1) or more computing
devices that contain a compatible version of the Microsoft Windows CE operating system. For other software component(s) contained in the Desktop Software, you may install and use such components only in accordance with the
terms of the printed or online end-user license agreement(s) provided with such
component(s). In the absence of an end user license agreement for particular
component(s) of the Desktop Software, you may install and use only one (1)
copy of such component(s) on the SYSTEM or a single computer with which
you use the SYSTEM.
• Backup Copy. If Manufacturer has not included a backup copy of the SYSTEM
Software with the SYSTEM, you may make a single backup copy of the SYSTEM Software. You may use the backup copy solely for archival purposes.
• Microsoft Outlook 2000. The following terms apply to your use of Microsoft
Outlook 2000 (i) regardless of the information contained in the “Software Installation and Use” section of the online EULA you may install one (1) copy of
Microsoft Outlook 2000 on one (1) computer to use, exchange data, share data,
30
Q u i c k
R e f e r e n c e
access, and interact with the SYSTEM, and (ii) the EULA is between Manufacturer (as defined above) and the end user-not between the PC Manufacturer
and end user.
nl
2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
• Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or
handwriting recognition component(s), you should understand that speech and
handwriting recognition are inherently statistical processes; that recognition
errors are inherent in the processes; that it is your responsibility to provide for
handling such errors and to monitor the recognition processes and correct any
errors. Neither Manufacturer nor its suppliers shall be liable for any damages
arising out of errors in the speech and handwriting recognition processes.
se
• Limitations on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE,
except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
lU
• Single SYSTEM. The SYSTEM Software is licensed with the SYSTEM as a
single integrated product. The SYSTEM Software installed in read-only memory
(“ROM”) of the SYSTEM may only be used as part of the SYSTEM.
na
• Single EULA. The package for the SYSTEM may contain multiple versions of
this EULA, such as multiple translations and/or multiple media versions (e.g., in
the user documentation and in the software). Even if you receive multiple versions of the EULA, you are licensed to use only one (1) copy of the SYSTEM
Software.
nt
er
• Rental. You may not rent or lease the SOFTWARE.
rI
• Software Transfer. You may permanently transfer all of your rights under this
EULA only as part of a sale or transfer of the SYSTEM, provided you retain no
copies, you transfer all of the SOFTWARE (including all component parts, the
media and printed materials, any upgrades or backup copies, this EULA and, if
applicable, the Certificate(s) of Authenticity), and the recipient agrees to the
terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include
all prior versions of the SOFTWARE.
Fo
• Termination. Without prejudice to any other rights, Manufacturer or MS may
terminate this EULA if you fail to comply with the terms and conditions of this
EULA. In such event, you must destroy all copies of the SOFTWARE and all of
its component parts.
3. UPGRADES AND RECOVERY MEDIA.
• SYSTEM Software. If the SYSTEM Software is provided by Manufacturer separate from the SYSTEM on media such as a ROM chip, CD-ROM disc(s) or via
Web download or other, means, and is labeled “For Upgrade Purposes Only” or
“For Recovery Purposes Only,” you may install one copy of such SYSTEM Software onto the SYSTEM as a replacement copy for the existing SYSTEM Software and use it in accordance with Section 1 of this EULA.
• Desktop Software. If any Desktop Software component(s) is provided by Manufacturer separate from the SYSTEM on CD-ROM disc(s) or via Web download
31
P D T
8 0 X X
W W A N
or other means, and labeled “For Upgrade Purposes Only” or “For Recovery
Purposes Only”, you may (i) install and use one copy of such component(s) on
the computer(s) you use to exchange data with the SYSTEM as a replacement
copy for the existing Desktop Software component(s).
Fo
rI
nt
er
na
lU
se
nl
4. COPYRIGHT. All title and intellectual property rights in and to the SOFTWARE (including, but not limited to, any images, photographs, animations, video, audio,
music, text, and “applets” incorporated into the SOFTWARE), the accompanying
printed materials, and any copies of the SOFTWARE, are owned by MS or its suppliers (including Microsoft Corporation). You may not copy the printed materials
accompanying the SOFTWARE. All title and intellectual property rights in and to
the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright
or other intellectual property laws and treaties. This EULA grants you no rights to
use such content. All rights not specifically granted under this EULA are reserved
by MS and its suppliers (including, Microsoft Corporation).
5. EXPORT RESTRICTIONS. You agree that you will not export or re-export the
SOFTWARE to any country, person, or entity subject to U.S. export restrictions.
You specifically agree not to export or re export the SOFTWARE: (i) to any country
to which the U.S. has embargoed or restricted the export of goods or services,
which as of May 1999 include, but are not necessarily limited to, Cuba, Iran, Iraq,
Libya, North Korea, Sudan, Syria, and the Federal Republic of Yugoslavia (including Serbia, but not Montenegro), or to any national of any such country, wherever
located, who intends to transmit or transport the products back to such country;
(ii) to any person or entity who you know or have reason to know will utilize the
SOFTWARE or portion thereof in the design, development, or production of nuclear, chemical, or biological weapons; or (iii) to any person or entity who has been
prohibited from participating in U.S. export transactions by any federal agency of
the U.S. government.
6. NOTE ON JAVA SUPPORT. The SOFTWARE may contain support for programs
written in Java. Java technology is not fault tolerant and is not designed, manufactured, or intended for use or resale as online control equipment in hazardous
environments requiring fail-safe performance, such as in the operation of nuclear
facilities, aircraft navigation or communication systems, air traffic control, direct
life support machines, or weapons systems, in which the failure of Java technology could lead directly to death, personal injury, or severe physical or environmental damage. Sun Microsystems, Inc. has contractually obligated Microsoft
Corporation to make this disclaimer.
7. PRODUCT SUPPORT. Product support for the SOFTWARE is not provided by
MS, its parent corporation, Microsoft Corporation, or their affiliates or subsidiaries.
For product support, please refer to Manufacturer's support number provided in
the documentation for the SYSTEM. Should you have any questions concerning
this EULA, or if you desire to contact Manufacturer for any other reason, please
refer to the address provided in the documentation for the SYSTEM.
FOR THE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO
YOUR PARTICULAR JURISDICTION, PLEASE REFERTO YOUR WARRANTY
BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE
SOFTWARE PRINTED MATERIALS.
32
Q u i c k
R e f e r e n c e
Regulatory Information
nl
All Symbol devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
Any changes or modifications to Symbol Technologies equipment, not expressly
approved by Symbol Technologies, could void the user’s authority to operate the
equipment.
Ergonomic Recommendations
na
lU
se
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to ensure
that you are adhering to your company’s safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Laser Devices
Fo
rI
nt
er
Symbol devices using lasers comply with US 21CFR1040.10, and IEC8251:1993, EN60825-1:1994+A11:1996. The laser classification is marked on
one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose. The following statement is required to comply with US and
international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
33
P D T
8 0 X X
W W A N
Fo
rI
nt
er
PDT 8056
na
lU
se
nl
Scanner Labeling
34
PDT 8037
Q u i c k
R e f e r e n c e
HEBREW
CLASS 1 LASER PRODUCT
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
se
ENGLISH
CLASS 1
CLASS 2
NORWEGIAN / NORSK
KLASSE 1
LASERPRODUKT, KLASSE 1
KLASSE 2
LASERLYS IKKE STIRR INN I LYSSTRÅLEN
LASERPRODUKT, KLASSE 2
na
FINNISH / SUOMI
LUOKKA 1
LUOKKA 1 LASERTUOTE
LUOKKA 2
LASERVALO
ÄLÄ TUIJOTA SÄDETTÄ
LUOKKA 2 LASERTUOTE
ITALIAN / ITALIANO
CLASSE 1
PRODOTTO AL LASER DI CLASSE 1
CLASSE 2
LUCE LASER
NON FISSARE IL RAGGIOPRODOTTO
AL LASER DI CLASSE 2
lU
DANISH / DANSK
KLASSE 1
KLASSE 1 LASERPRODUKT
KLASSE 2
LASERLYF
SE IKKE IND I STRÅLEN
KLASSE 2 LASERPRODUKT
DUTCH / NEDERLANDS
KLASSE 1
KLASSE-1 LASERPRODUKT
KLASSE 2
LASERLICHT
NIET IN STRAAL STAREN
KLASSE-2 LASERPRODUKT
nl
In accordance with Clause 5, IEC 825 and EN60825, the following information is
provided to the user:
PORTUGUESE / PORTUGUÊS
CLASSE 1
PRODUTO LASER DA CLASSE 1
CLASSE 2
LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
PRODUTO LASER DA CLASSE 2
SPANISH / ESPAÑOL
CLASE 1
PRODUCTO LASER DE LA CLASE 1
CLASE 2
LUZ LASER
NO MIRE FIJAMENTE EL HAZ
PRODUCTO LASER DE LA CLASE 2
GERMAN / DEUTCH
KLASSE 1
LASERPRODUKT DER KLASSE 1
KLASSE 2
LASERSTRAHLEN
NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN
LASERPRODUKT DER KLASSE 2
SWEDISH / SVENSKA
KLASS 1
LASERPRODUKT KLASS 1
KLASS 2
LASERLJUS STIRRA INTE MOT STRÅLEN
LASERPRODUKT KLASS 2
Fo
rI
nt
er
FRENCH / FRANÇAIS
CLASSE 1
PRODUIT LASER DE CLASSE 1
CLASSE 2
LUMIERE LASER
NE PAS REGARDER LE RAYON FIXEMENT
PRODUIT LASER DE CLASSE 2
35
P D T
8 0 X X
W W A N
Power Supply
Use only a Symbol-approved power supply 50-14001-005 output rated
15VDC and minimum 2.5A. The power supply is certified to EN60950
with SELV outputs.
Note:
FCC RF Exposure Guidelines
nl
Hinweis: Benutzen Sie nur eine Symbol Technologies genehmigt
Stromversorgung 50-14001-005 in den Ausgabe: 15VDC und
minimum 2.5A. Die Stromversorgung ist bescheinigt nach EN60950
mit SELV Ausgaben
lU
se
This device was tested for typical body-worn operations. The use of thirdparty belt-clips, holsters, and similar accessories should not contain metallic
components in its assembly. The use of these accessories that do not satisfy these
requirements may not comply with FCC RF exposure compliance requirements, and
should be avoided.
GSM Regulatory Warnings
na
Emergency Calls
The Worldwide GSM standard provides a single uniform number, 112, to dial in cases
of emergency. Provided that your phone has found a network you will be able to make
an emergency call. The call can be made regardless of any security codes and
depending on a network, with or without a SIM card inserted.
nt
er
Safety Information
The device complies with Internationally recognized standards covering Specific
Absorption Rate (SAR) related to human exposure to electromagnetic fields from
mobile phones.
It is advisable to use the device only in the normal operating position.
rI
Safety on the Road
Drivers are advised not to use the handset while their vehicle is in motion, except in
emergencies. Use the hands-free facility to speak only if it does not divert your
attention from the traffic.
Fo
Safety on Aircraft
You are required to switch off mobile phones when on board an aircraft or at any other
time when instructed to do so by a member of the crew.
Pacemakers
It is recommended by pacemaker manufacturers that a minimum of 15cm (6 inches)
be maintained between a handheld wireless phone and a pacemaker to avoid any
possible interference with the pacemaker. These recommendations are consistent
with independent research and recommendations by Wireless Technology Research.
Persons with Pacemakers:
• Should always keep the device more than 15cm (6 inches) from their pacemaker when turned on
36
Q u i c k
R e f e r e n c e
nl
• Should not carry the device in a breast pocket
• Should use the ear furthest from the pacemaker to minimize the potential for
interference.
• If you have any reason to suspect that interference is taking place, turn off your
device immediately.
Hearing Aids
The device may interfere with some hearing aids. In the event of interference you may
want to consult your hearing aid supplier to discuss solutions.
lU
se
Other Medical Devices
The device transmits radio frequency energy and has the potential to interfere with
inadequately protected medical devices. Consult your physician or the manufacturer
of the device to see if the particular device has sufficient protection.
It is good practice to turn off the device within a hospital or other medical facility where
sensitive medical equipment is in use. In some countries, this is a legal requirement
applying to all mobile phones and related equipment.
na
Effect on Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles (including safety systems). Check with the manufacturer
or its representative regarding your vehicle. You should also consult the manufacturer
of any equipment that has been added to your vehicle.
Warning Notices
Please observe all warning notices with regard to the usage of mobile phones.
nt
er
Potentially Hazardous Atmospheres
You are advised not to use this device at a refuelling point. You are reminded of the
need to observe restrictions on the use of radio devices in fuel depots, chemical
plants etc.
Radio Frequency Interference Requirements
rI
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
FOR HOME OR OFFICE USE
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Fo
Tested to comply
with FCC Standards
37
P D T
8 0 X X
W W A N
Radio Frequency Interference Requirements - FCC
nl
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Radio Frequency Interference Requirements - Canada
lU
se
Devices with integrated radios
This device complies with RSS 210 of Industry & Science Canada. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Label Marking: The Term "IC:" before the radio certification only signifies that Industry
Canada technical specifications were met.
Marking and European Economic Area (EEA)
RLAN's (2.4GHz) for use through the EEA have the following restrictions:
nt
er
na
• Maximum radiated transmit power of 100 mW EIRP in the frequency range
2.400 -2.4835 GHz
• France, equipment is restricted to 2.4465 -2.4835 GHz frequency range
• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range
• Italy requires a user license for outside usage.
Fo
rI
Other Countries
All 2.4GHz Radio Devices:
• Mexico - Restrict Frequency Range to: 2.450 - 2.4835 GHz.
• Israel - Restrict Frequency Range to: 2.418 - 2.457 GHz.
• Sri Lanka - Restrict Frequency Range to: 2.400 - 2.430 GHz.
38
Q u i c k
R e f e r e n c e
Radio Modules
nl
The PDT8000 WAN terminals contain approved radio modules. These modules are
identified below:
• PDT8057
Symbol Compact Flash RLAN (11Mbps DSSS) radio card, Type: LA-4137
Motorola Triband GSM GPRS module (G18), Type: MT3-411A21
• PDT8037
Motorola Triband GSM GPRS module (G18), Type: MT3-411A21
Statement of Compliance
Fo
rI
nt
er
na
lU
se
Symbol Technologies, Inc., hereby, declares that this device is in compliance with the
essential requirements and other relevant provisions of Directives 1999/5/EC.
Declaration of Conformities may be obtained from http://www2.symbol.com/doc/
39
8 0 X X
W W A N
Fo
rI
nt
er
na
lU
se
nl
P D T
40
Q u i c k
R e f e r e n c e
Warranty
nl
(A) Warranty Symbol Technologies (hereafter “Seller”) hardware Products are warranted against defects in
workmanship and materials for a period of twelve (12) months from the date of shipment, unless otherwise
provided by Seller in writing, provided the Product remains unmodified and is operated under normal and
proper conditions. Warranty provisions and durations on software, integrated installed systems, Product
modified or designed to meet specific customer specifications (“Custom Products”), remanufactured
products, and reconditioned or upgraded products, shall be as provided in the applicable Product
specification in effect at the time of purchase or in the accompanying software license.
(B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold by Seller for use in the service
and maintenance of Products) are warranted against defects in workmanship and materials for a period of
thirty (30) days from the date of shipment. Spare parts may be new or originate from returned units under the
conditions set forth in subsection D below.
se
(C) Repair of Symbol-branded hardware For repairs on Symbol-branded hardware Products under this
Agreement, including repairs covered by warranty, the repair services provided are warranted against
defects in workmanship and materials on the repaired component of the Product for a period of thirty (30)
days from the shipment date of the repaired Product, or until the end of the original warranty period,
whichever is longer.
nt
er
na
lU
(D) Product Service Products may be serviced or manufactured with parts, components, or subassemblies
that originate from returned products and that have been tested as meeting applicable specifications for
equivalent new material and Products. The sole obligation of Seller for defective hardware Products is limited
to repair or replacement (at Seller’s option) on a “return to service depot” basis with prior Seller authorization.
Customer is responsible for shipment to the Seller and assumes all costs and risks associated with this
transportation; return shipment to the Customer will be at Seller's expense. Customer shall be responsible
for return shipment charges for product returned where Seller determines there is no defect (“No Defect
Found”), or for product returned that Seller determines is not eligible for warranty repair. No charge will be
made to Buyer for replacement parts for warranty repairs. Seller is not responsible for any damage to or loss
of any software programs, data or removable data storage media, or the restoration or reinstallation of any
software programs or data other than the software, if any, installed by Seller during manufacture of the
Product.
(E) Original Warranty Period Except for the warranty applying solely to the repaired component arising from
a repair service as provided in Section C above, the aforementioned provisions do not extend the original
warranty period of any Product that had either been repaired or replaced by Seller.
Fo
rI
(F) Warranty Provisions The above warranty provisions shall not apply to any Product (i) which has been
repaired, tampered with, altered or modified, except by Seller’s authorized service personnel; (ii) in which the
defects or damage to the Product result from normal wear and tear, misuse, negligence, improper storage,
water or other liquids, battery leakage, use of parts or accessories not approved or supplied by Symbol, or
failure to perform operator handling and scheduled maintenance instructions supplied by Seller; (iii) which
has been subjected to unusual physical or electrical stress, abuse, or accident, or forces or exposure beyond
normal use within the specified operational and environmental parameters set forth in the applicable Product
specification; nor shall the above warranty provisions apply to any expendable or consumable items, such
as batteries, supplied with the Product.
EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS WARRANTIES STATED ABOVE,
SELLER DISCLAIMS ALL WARRANTIES ON PRODUCTS FURNISHED HEREUNDER INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. ANY
IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED
WARRANTY PERIOD. SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG
AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES, FOR
SUCH PRODUCTS, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT
APPLY.
The stated express warranties are in lieu of all obligations or liabilities on the part of Seller for damages,
including but not limited to, special, indirect or consequential damages arising out of or in connection with
the use or performance of the Product or service. Seller’s liability for damages to Buyer or others resulting
from the use of any Product or service furnished hereunder shall in no way exceed the purchase price of said
Product or the fair market value of said service, except in instances of injury to persons or property.
Service Information
1-800-653-5350
1-631-738-2400
Canada
United Kingdom
0800 328 2424
Asia/Pacific
905-629-7226
nl
United States1
Before you use the unit, it must be configured to operate in your facility’s network and
run your applications.
If you have a problem running your unit or using your equipment, contact your facility’s
Technical or Systems Support. If there is a problem with the equipment, they will
contact the Symbol Support Center:
+65-6796-9600
1-800-672-906
Austria/Österreich
1-505-5794-0
Denmark/Danmark
7020-1718
Finland/Suomi
9 5407 580
France
01-40-96-52-21
Germany/Deutchland
Italy/Italia
2-484441
Mexico/México
5-520-1835
Netherlands/Nederland
315-271700
Norway/Norge
+47 2232 4375
South Africa
11-8095311
Sweden/Sverige
84452900
lU
6074-49020
91 324 40 00
Inside Spain
+34 91 324 40 00
Outside Spain
1-800-347-0178 Inside US
+1-954-255-2610 Outside US
Contact local distributor or call
+44 118 945 7360
nt
er
Europe/Mid-East
Distributor Operations
Spain/España
na
Latin America
Sales Support
se
Australia
Customer support is available 24 hours a day, 7 days a week.
Fo
rI
For the latest version of this guide go to: http://www.symbol.com/manuals.
72-61492-01
Revision A — March 2003
Symbol Technologies, Inc. One Symbol Plaza, Holtsville, N.Y. 11742-1300

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2003:03:24 09:56:14Z
Create Date                     : 1998:04:30 11:22:54Z
Creator                         : FrameMaker 7.0
Page Count                      : 44
Creation Date                   : 1998:04:30 11:22:54Z
Mod Date                        : 2003:03:21 10:49:00Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2003:03:21 10:49:00Z
Title                           : Untitled Document
Page Mode                       : UseOutlines
EXIF Metadata provided by EXIF.tools
FCC ID Filing: H9PPDT8056

Navigation menu