Symbol Technologies RD11440 RF ID Reader User Manual

Symbol Technologies Inc RF ID Reader

Manual rev

© 2006 SYMBOL TECHNOLOGIES, INC. All rights reserved.Symbol reserves the right to make changes to any product to improve reliability, function, or design.Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Symbol products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Symbol products.Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.Symbol Technologies, Inc.One Symbol PlazaHoltsville, N.Y. 11742-1300http://www.symbol.comReference DocumentsSupporting documents are available for viewing/download from the Symbol documentation web site:http://www.symbol.com/manualsSoftware updates, SDKs, development support and related documents are available from the Symbol Devzone web site:http://devzone.symbol.comPatentsThis product is covered by one or more of the patents listed on the web site:http://www.symbol.com/patentsWarrantyFor the complete Symbol hardware product warranty statement, go to:http://www.symbol.com/warranty Service InformationBefore using the unit, it must be configured to operate in the facility network and run the required applications. If a problem occurs using the equipment, contact the facility Technical or Systems Support representative. If there is a problem with the equipment, they will contact the Symbol Support Center:For the latest version of this guide and other supporting documentation, go to: http://www.symbol.com/manualsUnited States 1-800-653-53501-631-738-2400Canada 905-629-7226United Kingdom 0800 328 2424 Asia/Pacific +65-6796-9600Australia 1-800-672-906 Austria/Österreich 01-5055794-0Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580France 01-40-96-52-21 Germany/Deutschland 6074-49020Italy/Italia 2-484441 Mexico/México 5-520-1835Netherlands/Nederland 315-271700 Norway/Norge +47 2232 4375South Africa 11-809 5311 Spain/España Inside Spain 91 324 40 00Sweden/Sverige 08 445 29 00 Outside Spain +34 91 324 40 00Latin America Sales Support1-800-347-0178 Inside US+1-954-255-2610 Outside USEurope/Mid-East Distributor OperationsContact local distributor or call+44 118 945 736072-XXXXX-01Revision A — XXX 2006RFID ReaderQuick Reference GuideXR400 / XR480IntroductionThis QRG (Quick Reference Guide) provides information for the XR Series RFID Readers. The QRG includes LED definitions, port descriptions, and mounting information. For details, refer to the XR Series RFID Reader Integrator Guide P/N 72E-71773-XX, available at: http://www.symbol.com/manualsProduct DescriptionThe Symbol XR Series RFID Readers are intelligent, multi-protocol UHF RFID readers with RFID read performance that provides real-time, seamless EPC-compliant tags processing.Features:• UHF Generation 2 support (EPC Class 0 and Class 1 supported only in XR400)• Intel XScale® processor with Windows® CE • Support for custom or third-party applications• Feature set for event and tag management.Firmware UpdatesThe XR SeriesXR Series RFID Readers are shipped with the current firmware version. To install the latest upgrade refer to the XR Series Integrator Guide P/N 72E-71773-XX, available from: http://www.symbol.com/manualsNote: Ensure that power is not interrupted during a firmware upgrade.LED DefinitionsLEDs indicate reader status as described in the following table.Physical Connections PortsMountingFor installation instructions refer to the XR Series Integrator Guide P/N 72E-71773-XX, available from: http://www.symbol.com/manuals. 1. Position the XR reader on the wall or shelf, ensuring a minimum clearance of five inches on all sides. Orient the XR reader vertically with the ports at the bottom and ensure that all connected cables hang straight down.2. Mark the hole locations using the mounting tabs as a guide. Remove the XR400 and drill four mounting holes at the marked locations. 3. Reposition the XR reader over the mounting holes and secure using fasteners appropriate for the surface material.LED IndicationGreen Reader is powered on.Red Error condition or non-operational mode, e.g., boot-up.Yellow Successful tag read.USB Client10/100BaseT Ethernet GPIOPowerLEDsAntenna (Reverse TNC) USB Host RS232MountingTabs Mounting TabsReset ButtonPort DescriptionAntenna (Reverse TNC) XR400/XR480 - Supports up to eight antennas (four transmit, four receive).XR480 - Supports up to eight transceiver antennas.10/100BaseT Ethernet Insert a standard RJ45 Ethernet cable for connection to an Ethernet network. Insert a cross-connect Ethernet cable for connection to a local PC.USB Client For future expansion.USB Host Support for USB Flash drives, USB screen.RS232 For serial console only.GPIO Insert a DB15 serial cable for connection to an external device.Power Connect the Symbol approved power supply (see Power Supply for the Symbol approved power supply). The power supply uses an AC adapter that varies depending on the country. Maximum power consumption: 24 VDC, 1.2 A.
Regulatory InformationAll Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Regulatory information is available from: http://www.symbol.com/manualsAny changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the authority to operate the equipment.Antennas: Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations. Country Approvals Regulatory markings are applied to the device signifying the radio(s) are approved for use in the following countries: United States.Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is available at: http://www2.symbol.com/doc.Operation of the device without regulatory approval is illegal.Health and Safety Recommendations Warnings for Use of Wireless DevicesPlease observe all warning notices with regard to the usage of wireless devices.Potentially Hazardous Atmospheres-Fixed InstallationsYou are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders). RF Exposure GuidelinesSafety InformationReducing RF Exposure - Use Properly It is advisable to use the device only in the normal operating position. Remote and Standalone Antenna ConfigurationsTo comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 79 cm from all persons.Power Supply Use only a Symbol approved power supply, output rated 24 Vdc and minimum 3 Amps. The power supply is certified to UL60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous.Radio Frequency Interference Requirements - FCC Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Navigation menu