Symbol Technologies TC700H Touch Computer User Manual
Symbol Technologies Inc Touch Computer Users Manual
Users Manual
We reserves the right to make changes to any product to improve
reliability, function, or design. We do not assume any product liability
arising out of, or in connection with, the application or use of any product,
circuit, or application described herein. No license is granted, either
expressly or by implication, estoppel, or otherwise under any patent right
or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which our products might be
used. An implied license exists only for equipment, circuits, and
subsystems contained in the products.
Warranty
For the complete hardware product warranty statement, go to: http://
www.motorolasolutions.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s
Technical or Systems Support. If there is a problem with the equipment,
they will contact the Global Support Center at: http://
www.motorolasolutions.com/support.
For the latest version of this guide go to: http://
www.motorolasolutions.com/support.
TC70
REGULATORY
GUIDE
Symbol Technologies, Inc.
One Motorola Plaza
Holtsville, NY 11742-1300, U.S.A.
http://www.motorolasolutions.com
Symbol® is a registered trademark of Symbol Technologies, Inc. All
other trademarks and service marks are proprietary to their respective
owners.
© 2014 Symbol Technologies, Inc. All Rights Reserved.
MN000977A01 Rev. A — September 2014
Regulatory Information
This device is approved under Symbol Technologies, Inc.
This guide applies to the Model Number: TC700H.
All Symbol devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as
required.
Local language translations are available at the following website:
http://www.motorolasolutions.com/support.
Any changes or modifications to Symbol equipment, not expressly
approved by Symbol, could void the user's authority to operate the
equipment.
Declared maximum operating temperature: 50°C.
Bluetooth®Wireless Technology
This is an approved Bluetooth product. For more information or to
view the End Product Listing, please visit http://www.bluetooth.org/
tpg/listings.cfm.
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the
device signifying the radio(s) are approved for use in the following
countries: United States, Canada, Japan, China, S. Korea,
Australia, and Europe. Please refer to the Declaration of Conformity
(DoC) for details of other country markings. This is available at
http://www.motorolasolutions.com/doc.
Note: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
Country Roaming
This device incorporates the International Roaming feature
(IEEE802.11d) which will ensure the product operates on the
correct channels for the particular country of use.
Frequency of Operation – IC
Industry Canada Statement
Caution: The device for the band 5150 - 5250 MHz is only for
indoor usage to reduce potential for harmful interference to co-
Channel mobile satellite systems. High power radars are allocated
as primary users (meaning they have priority) of 5250 - 5350 MHz
and 5650 - 5850 MHz and these radars could cause interference
and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande 5150 -
5250 MHz est réservé uniquement pour une utilisation à l'intérieur
afin de réduire les risques de brouillage préjudiciable aux systèmes
de satellites mobiles utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bands
5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars pourraient
causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
2.4 GHz
The available channels for 802.11 b/g operation in the US are
Channels 1 to 11. The range of channels is limited by firmware.
Health and Safety Recommendations
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a neutral postures
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (including safety systems).
Check with the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the area
over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
Position your device within easy reach. Be able to access your
device without removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to
sound or lights to flash, on receipt of a call on public roads, is not
permitted.
IMPORTANT
Before installing or using, check state and local laws regarding
windshield mounting and use of equipment.
For Safe installation
• Do not put your phone in a location that obstructs the drivers
vision or interferes with the operation of the Vehicle.
• Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a “to
do” list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full
attention to driving. Check the laws and regulations on the use of
wireless devices in the areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice
good common sense and remember the following tips:
1. Get to know your wireless device and any features such as
speed dial and redial. If available, these features help you to
place your call without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
5. Do not engage in stressful or emotional conversations that may
be distracting. Make people you are talking with aware you are
driving and suspend conversations that have the potential to
divert your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency
services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless
phone! The call can be made regardless of any security codes
and depending on a network, with or without a SIM card
inserted.
7. Use your wireless phone to help others in emergencies. If you
see an auto accident, crime in progress or other serious
emergency where lives are in danger, call the Emergency
Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number, as you would want others to do for you.
8. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other special non-
emergency wireless number.
“The wireless industry reminds you to use your device / phone
safely when driving.”
Please observe all warning notices with regard to the usage of
wireless devices.
Potentially Hazardous Atmospheres – Vehicles Use
You are reminded of the need to observe restrictions on the use of
radio devices in fuel depots, chemical plants etc. and areas where
the air contains chemicals or particles (such as grain, dust, or metal
powders) and any other area where you would normally be advised
to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do
so by airport or airline staff. If your device offers a 'flight mode' or
similar feature, consult airline staff as to its use in flight.
Wireless devices transmit radio frequency energy and may affect
medical electrical equipment.
Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics or healthcare facilities.
These requests are designed to prevent possible interference with
sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm
(6 inches) be maintained between a handheld wireless device and a
pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with independent research
and recommendations by Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches)
from their pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimize the
potential for interference.
• If you have any reason to suspect that interference is taking
place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical
device, to determine if the operation of your wireless product may
interfere with the medical device.
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions
supplied.
International
The device complies with internationally recognized standards
covering human exposure to electromagnetic fields from radio
devices. For information on "International" human exposure to
electromagnet fields refer to the Symbol Declaration of Conformity
(DoC) at http://www.motorolasolutions.com/doc. For further
information on the safety of RF energy from wireless devices - see
http://responsibility.motorolasolutions.com/index.php/downloads.
Located under Wireless Communications and Health.
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use only
Symbol tested and approved belt-clips, holsters, and similar
accessories to ensure EU Compliance.
US and Canada
Use only Symbol tested and approved belt-clips, holsters, and
similar accessories to ensure FCC Compliance. The use of third-
party belt-clips, holsters, and similar accessories may not comply
with FCC RF exposure compliance requirements, and should be
avoided. The FCC has granted an Equipment Authorization for
these model phones with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR information
on these model phones is on file with the FCC and can be found
under the Display Grant section of http://www.fcc.gov/oet/ea/fccid.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the
antenna used for this transmitter must not be co-located or
operating in conjunction with any other transmitter/antenna except
those already approved in this filing.
To satisfy US and Canadian RF exposure requirements, a
transmitting device must operate with a minimum separation
distance of 1.5 cm or more from a person's body.
Pour satisfaire aux exigences Américaines et Canadiennes
d'exposition aux radiofréquences, un dispositif de transmission doit
fonctionner avec une distance de séparation minimale de 1.5 cm ou
plus de corps d'une personne.
Class 2 laser scanners use a low power, visible light diode. As with
any very bright light source, such as the sun, the user should avoid
staring directly into the light beam. Momentary exposure to a Class
2 laser is not known to be harmful.
The following statement is required to comply with US and
international regulations.
CAUTION: Use of controls, adjustments or performance of
procedures other than those specified herein may result in
hazardous laser light exposure.
Scanner Labeling
Labels read:
1. LASER/LED LIGHT - DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER/1M
LED PRODUCT.
2. CAUTION - CLASS 2 LASER, 1M LED LIGHT WHEN OPEN. DO
NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS.
3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED
JUNE 24, 2007, AND IEC 60825-1:2007 (Ed.1.2, 2.0), EN60825-
1:2007 & IEC 62471:2006 (Ed.1.0); EN 62471:2008.
LED Devices
For LED devices which have been evaluated to IEC 62471 and
comply with the Exempt Risk Group, no product labeling
requirements apply. However, the following statement is required to
comply with US and international regulations:
LED Compliance Statement:
Classified as “EXEMPT RISK GROUP” according to IEC
62471:2006 and EN 62471:2008
Pulse duration: 1.7 ms
Power Supply
Use ONLY a Symbol approved UL LISTED ITE (IEC/EN 60950-1,
LPS) power supply with electrical ratings: Output 5.4 VDC, min
3.0 A, with a maximum ambient temperature of at least 50 °C. Use
of alternative power supply will invalidate any approvals given to
this unit and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection
Administration) requires dry battery producing
or importing firms in accordance with Article
15 of the Waste Disposal Act are required to
indicate the recycling marks on the batteries used in sales,
giveaway or promotion. Contact a qualified Taiwanese recycler for
proper battery disposal.
Battery Information
Use only Symbol approved batteries. Accessories which have
battery charging capability are approved for use with the following
battery models:
• Symbol 82-171249-01 (3.7 VDC, 4500 mAh)
Symbol rechargeable battery packs are designed and constructed
to the highest standards within the industry.
However, there are limitations to how long a battery can operate or
be stored before needing replacement. Many factors affect the
actual life cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible
deterioration in overall battery quality may occur. Store batteries at
half of full charge in a dry, cool place, removed from the equipment
to prevent loss of capacity, rusting of metallic parts and electrolyte
leakage. When storing batteries for one year or longer, the charge
level should be verified at least once a year and charged to half of
full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Symbol batteries is one year,
regardless if the battery was purchased separately or included as
part of the mobile computer. For more information on Symbol
batteries, please visit: https://
atgsupportcentral.motorolasolutions.com/content/emb/docs/MSC/
batbasics1.pdf
Battery Safety Guidelines
• The area in which the units are charged should be clear of
debris and combustible materials or chemicals. Particular care
should be taken where the device is charged in a non
commercial environment.
• Follow battery usage, storage, and charging guidelines found in
the User Guide.
• Improper battery use may result in a fire, explosion, or other
hazard.
• To charge the mobile device battery, the battery and charger
temperatures must be between +32 ºF and +104 ºF (0 ºC and
+40 ºC).
• Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any questions
about the compatibility of a battery or a charger, contact Symbol
Support.
• For devices that utilize a USB port as a charging source, the
device shall only be connected to products that bear the USB-IF
logo or have completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform, puncture,
or shred.
• Severe impact from dropping any battery-operated device on a
hard surface could cause the battery to overheat.
• Do not short circuit a battery or allow metallic or conductive
objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects
into the battery, immerse or expose to water or other liquids, or
expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might
get very hot, such as in a parked vehicle or near a radiator or
other heat source. Do not place battery into a microwave oven
or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used re-
chargeable batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been
swallowed.
• In the event of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash
the affected area with large amounts of water and seek medical
advice.
• If you suspect damage to your equipment or battery, contact
Global Customer Support to arrange for inspection.
This device is marked HAC showing compliance with the applicable
requirements of IC CS-03-Part 5.
Radio Frequency Interference Requirements-
FCC
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
The use of 5 GHz WLAN's, for use in the US, have the following
restrictions:
• Notched Band 5.60 - 5.65 GHz.
Radio Frequency Interference Requirements -
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following
restrictions:
CAUTION Only use Symbol approved and UL Listed
accessories, battery packs and battery chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be
dry before connecting to an external power
source.
Operation of the device without regulatory approval is
illegal.
CAUTION In order to avoid or minimize the potential risk of
ergonomic injury follow the recommendations
below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your
company’s safety programs to prevent employee
injury.
Warnings for Use of Wireless Devices
Safety in Hospitals
RF Exposure Guidelines
Laser Devices
3
2
1
CAUTION Risk of explosion if battery is replaced by an
incorrect type. Dispose of batteries according to
instructions.
PRELIMINARY
• Restricted Band 5.60 - 5.65 GHz
This device is in compliance with the NRC for Industry Canada
applicable to license-exempt radios. Use is allowed with the
following two conditions: (1) the device must not produce
interference, and (2) the device must accept any interference to the
radio, even if the interference is likely to compromise operation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
Label Marking: The Term “IC:” before the radio certification only
signifies that Industry Canada technical specifications were met.
The use of 2.4 GHz RLAN's, for use through the EEA, have the
following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Bluetooth® Wireless Technology for use through the EEA has the
following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Statement of Compliance
Symbol hereby, declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive
1999/5/EC and 2011/65/EU. A Declaration of Conformity may be
obtained from http://www.motorolasolutions.com/doc.
TURKISH WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur
Korea Warning Statement for Class B ITE
Other Countries
Australia
Use of 5 GHz RLAN's in Australia is restricted in the following band
5.60 - 5.65GHz.
Brazil
Regulatory declarations for TC700H - BRAZIL
For more information consult the website www.anatel.gov.br
Declarações Regulamentares para TC700H - Brazil
Nota: “A marca de certificação se aplica ao Transceptor, modelo
TC700H. Este equipamento opera em caráter secundário, isto é,
não tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.”
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br.
Este equipamento opera em caráter secundário, isto é, não tem
direito a proteção contra interferência prejudicial, mesmo de
estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
Este produto está homologado pela Anatel, de acordo com os
procedimentos regulamentados pela Resolução n°242/2000 e
atende aos requisitos técnicos aplicados, incluindo os limites de
exposição da Taxa de Absorção Específica referente a campos
elétricos, magnéticos e eletromagnéticos de radiofrequência, de
acordo com as Resoluções n° 303/2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes de
exposição à radiofrequência quando posicionado pelo menos 1.5
centímetros de distância do corpo. Para maiores informações,
consulte o site da Anatel.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la
Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.
China
忂彯孧斖ẍᶳ仹⛨⎗ᶳ弥⛘宕妨㓗㊩䘬ṏ⑩宜㖶Ḏ
http://www.motorolasolutions.com/CN-ZH/Pages/
Contact_Us#support_tab
Hong Kong
In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for
indoor operation only.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
South Korea
뼩鲮ꓩꟹ鱉끩끞닆놹볁뿱겕閵鱚ꫦ넩넽넁
뼩鲮ꓩꟹ鱉놹볁뿱겕閵鱚ꫦ넩넽냱ꕵꈑ넭ꐺ껽놹隱隵ꇝ鷑
ꟹ걙鱉뼕ꯍ꽻걪鱽鲙
Taiwan
咉䋲
վ࣏⦷䴫⌒䕫ሴᙗ䴫㇑⨶䗖⌅
ㅜॱҼọ
㏃රᔿ䂽䅹ਸṬѻվ࣏⦷ሴ乫䴫ˈ䶎㏃䁡ਟˈޜਨǃ୶㲏ᡆ
֯⭘㘵൷нᗇ㠚䆺ᴤ乫⦷ǃ࣐བྷ࣏⦷ᡆ䆺ᴤ䁝䀸ѻ⢩ᙗ৺
࣏㜭DŽ
ㅜॱഋọ
վ࣏⦷ሴ乫䴫ѻ֯⭘нᗇᖡ丯伋㡚ᆹޘ৺ᒢᬮਸ⌅䙊ؑ˗㏃
Ⲭ⨮ᴹᒢᬮ⨮䊑ᱲˈ៹・ণڌ⭘ˈі᭩ழ㠣❑ᒢᬮᱲᯩᗇ㒬㒼
֯⭘DŽ
ࡽ丵ਸ⌅䙊ؑˈᤷ䴫ؑ㾿ᇊᾝѻ❑㐊䴫䙊ؑDŽ
վ࣏⦷ሴ乫䴫丸ᗽਇਸ⌅䙊ؑᡆᐕᾝǃ、ᆨ৺䟛Ⱳ⭘䴫⌒䕫
ሴᙗ䴫䁝ۉѻᒢᬮDŽ
൘ 〝䎛乫ᑦޗѻ❑㐊䋷䀺ۣ䕨䁝ۉˈ䲀ᯬᇔ
ޗ֯⭘DŽ
Ukraine
Дане обладнання відповідає вимогам технічного регламенту
№1057, № 2008 на обмеження щодо використання деяких
небезпечних речовин в електричних та електронних пристроях.
Thailand
ࡳ࠻࡚ࡻࡤ࠾ࡵࡎ࡚࠻ࡘࡐࡩ࠻ࡘࡴࡧࡤࡒ࠸࡚ࡊࡿࡐࡼ
ࡘ࠻࡞ࡩࡘࡡࡤࡋ࠻ࡼࡤ࠾ࡌࡩࡘ࠹ࡼࡤ࠸ࡪࡢࡐࡋ࠹ࡤ࠾࠸ࡎࡁ
English: For EU Customers: All products at the end of their life
must be returned to Symbol for recycling. For information on how to
return product, please go to: http://www.motorolasolutions.com/
recycling/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin
de cycle de vie doivent être retournés à Symbol pour recyclage.
Pour de plus amples informations sur le retour de produits,
consultez : http://www.motorolasolutions.com/recycling/weee.
Español: Para clientes en la Unión Europea: todos los productos
deberán entregarse a Symbol al final de su ciclo de vida para que
sean reciclados. Si desea más información sobre cómo devolver un
producto, visite: http://www.motorolasolutions.com/recycling/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am
Ende ihrer Lebensdauer zum Recycling an Symbol zurückgesandt
werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.motorolasolutions.com/recycling/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al
termine del rispettivo ciclo di vita devono essere restituiti a Symbol
al fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://
www.motorolasolutions.com/recycling/weee.
Português: Para clientes da UE: todos os produtos no fim de vida
devem ser devolvidos à Symbol para reciclagem. Para obter
informações sobre como devolver o produto, visite:
http://www.motorolasolutions.com/recycling/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het
einde van hun levensduur naar Symbol te worden teruggezonden
voor recycling. Raadpleeg http://www.motorolasolutions.com/
recycling/weee voor meer informatie over het terugzenden van
producten.
Polski: .OLHQFL]REV]DUX8QLL(XURSHMVNLHM3URGXNW\Z\FRIDQH]
HNVSORDWDFMLQDOHļ\]ZUµFLÉGRILUP\ SymbolZFHOXLFKXW\OL]DFML
,QIRUPDFMHQDWHPDW]ZURWXSURGXNWµZ]QDMGXMÇVLÛQDVWURQLH
LQWHUQHWRZHMKWWSZZZPRWRURODVROXWLRQVFRPUHF\FOLQJZHHH
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po
skonèení jejich životnosti vrátit spoleènosti Symbol k recyklaci.
Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.motorolasolutions.com/recycling/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Symbol'ile. Lisainformatsiooni
saamiseks toote tagastamise kohta külastage palun aadressi: http://
www.motorolasolutions.com/recycling/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a
Symbol vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson
el a http://www.motorolasolutions.com/recycling/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Symbol za reciklažo. Za informacije o
vraèilu izdelka obišèite: http://www.motorolasolutions.com/
recycling/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin
livslängd måste returneras till Symbol för återvinning. Information
om hur du returnerar produkten finns på
http://www.motorolasolutions.com/recycling/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Symbol-yhtiöön, kun tuotetta ei enää
käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://
www.motorolasolutions.com/recycling/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til
recirkulering, når de er udtjent. Læs oplysningerne om returnering
af produkter på: http://www.motorolasolutions.com/recycling/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της
διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Symbol για
ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://
www.motorolasolutions.com/recycling/weee στο Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-
ħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Symbol għar-
riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.motorolasolutions.com/recycling/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť
po uplynutí doby ich životnosti vrátené spoločnosti Symbol na
recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://
www.motorolasolutions.com/recycling/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Symbol“.
Daugiau informacijos, kaip grąžinti gaminį, rasite: http://
www.motorolasolutions.com/recycling/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža
beigām ir jānogādā atpakaļ Symbol otrreizējai pārstrādei. Lai iegūtu
informāciju par produktu nogādāšanu Symbol, lūdzu, skatiet: http://
www.motorolasolutions.com/recycling/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri
dönüştürme için Symbol'ya iade edilmelidir. Ürünlerin nasıl iade
edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://
www.motorolasolutions.com/recycling/weee.
Software Support
Symbol wants to ensure that customers have the latest release of
entitled software at the time of product purchase.
To confirm that your Symbol Solutions device shipped with the latest
release of entitled software, visit: www.motorolasolutions.com/
support. Check for the latest software from Software Downloads >
Product Line/Product > Go.
If your device does not have the latest entitled software release as
of your product purchase date, please e-mail a request to:
entitlementservices@motorolasolutions.com.
You must include the following essential device information with
your request:
• Model number
• Serial number
• Proof of purchase
• Title of the software download you are requesting.
If it is determined by Symbol that your device is entitled to the latest
software release, you will receive an e-mail containing a link
directing you to a Symbol Web site to download the appropriate
software.
Symbol Technologies, Inc. End User License
Agreement
BY INSTALLING AND/OR USING THIS PRODUCT, YOU
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT,
UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU
DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, SYMBOL
TECHNOLOGIES IS NOT WILLING TO LICENSE THE PRODUCT TO
YOU, AND YOU MUST NOT USE OR INSTALL THIS PRODUCT.
Grant of License. Symbol Technologies grants you (“Licensee” or “you”)
a personal, nonexclusive, nontransferable, nonassignable, no cost
license to use the software and documentation (“Product(s)”) subject to
the terms and conditions of this Agreement. You shall use the Products
only for your internal business purposes, exclusively to support Symbol
Technologies devices. Any use of the Products outside of the conditions
set forth herein is strictly prohibited and will be deemed a breach of this
Agreement resulting in immediate termination of your License. In the
event of a breach of this Agreement, Symbol Technologies will be
entitled to all available remedies at law or in equity (including immediate
injunctive relief and repossession of all Products unless Licensee is a
Federal agency of the United States Government).
You shall not distribute, sublicense, rent, loan, lease, export, re-export,
resell, ship or divert or cause to be exported, re-exported, resold,
shipped or diverted, directly or indirectly, the Products under this
Agreement. You shall not, and shall not permit others to: (i) modify,
translate, decompile, bootleg, reverse engineer, disassemble, or extract
the inner workings of the Products, (ii) copy the look-and-feel or
functionality of the Products; (iii) remove any proprietary notices, marks,
labels, or logos from the Products; (iv) rent or transfer all or some of the
Products to any other party without Symbol Technologies' prior written
consent; or (v) utilize any computer software or hardware which is
designed to defeat any copy protection device, should the Products be
equipped with such a protection device.
Title to all copies of Products will not pass to Licensee at any time and
remains vested exclusively in Symbol Technologies. All intellectual
property developed, originated, or prepared by Symbol Technologies in
connection with the Products remain vested exclusively in Symbol
Technologies, and this Agreement does not grant to Licensee any
intellectual property rights.
Portions of the Products are protected by United States patent and
copyright laws, international treaty provisions, and other applicable laws.
Therefore, you must treat the Products like any other copyrighted
material (e.g., a book or musical recording) except that you may make
one copy of the Product solely for back-up purposes. Unauthorized
duplication of the Products constitutes copyright infringement, and in the
United States is punishable in federal court by fine and imprisonment.
Disclaimer. SYMBOL TECHNOLOGIES MAKES, AND YOU RECEIVE,
NO WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED,
STATUTORY, OR IN ANY COMMUNICATION WITH YOU. SYMBOL
TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY WARRANTY
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY,
NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.
THE PRODUCTS ARE PROVIDED “AS IS.” SYMBOL TECHNOLOGIES
DOES NOT WARRANT THAT THE PRODUCTS WILL MEET YOUR
REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS
WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS
IN THE PRODUCTS WILL BE CORRECTED. SYMBOL
TECHNOLOGIES MAKES NO WARRANTY WITH RESPECT TO THE
CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS.
Some jurisdictions do not allow the exclusion of implied warranties, so
the above exclusion may not apply to you.
Limitation of Liability. THE TOTAL LIABILITY OF SYMBOL
TECHNOLOGIES UNDER THIS AGREEMENT FOR DAMAGES SHALL
NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS
LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL SYMBOL
TECHNOLOGIES BE LIABLE IN ANY WAY FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF
ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS
PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS,
WHETHER FORESEEABLE OR NOT, REGARDLESS OF WHETHER
SYMBOL TECHNOLOGIES HAS BEEN ADVISED OF THE
POSSIBLITY OF SUCH DAMAGES. Some jurisdictions do not permit
limitations of liability for incidental or consequential damages, so the
above exclusions may not apply to you. This Limitation of Liability
provision survives the termination of this Agreement and applies
notwithstanding any contrary provision in this Agreement. Licensee must
bring any action under this Agreement within one (1) year after the cause
of action arises.
Maintenance. Unless provided for in a separate agreement, Symbol
Technologies shall not be responsible for maintenance or field service of
the Products.
High Risk Activities. The Products are not fault-tolerant and are not
designed, manufactured or intended for use or resale as on-line control
software in hazardous environments requiring fail-safe performance,
such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines,
or weapons systems, in which the failure of the Products could lead
directly to death, personal injury, or severe physical or environmental
damage (“High Risk Activities”). Symbol Technologies and its suppliers
specifically disclaim any express or implied warranty of fitness for High
Risk Activities, and if you elect to use the Products in any High Risk
Activities, you agree to indemnify, defend, and hold Symbol Technologies
harmless from and against any and all costs, damages, and losses
related to that use.
U.S. Government. If you are acquiring the Products on behalf of any unit
or agency of the U.S. Government, the following shall apply. Use,
duplication, or disclosure of the Products is subject to the restrictions set
forth in subparagraphs (c) (1) and (2) of the Commercial Computer
Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if
applicable, unless being provided to the Department of Defense. If being
provided to the Department of Defense, use, duplication, or disclosure of
the Products is subject to the restricted rights set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may
not include a Restricted Rights notice, or other notice referring
specifically to the terms and conditions of this Agreement. The terms and
conditions of this Agreement shall each continue to apply, but only to the
extent that such terms and conditions are not inconsistent with the rights
provided to you under the aforementioned provisions of the FAR and
DFARS, as applicable to the particular procuring agency and
procurement transaction.
Governing Law. This Agreement shall be governed by the laws of the
United States of America to the extent that they apply and otherwise by
the laws of the State of New York without regard to its conflict of laws
provisions.
Compliance with Laws. Licensee will comply with all applicable laws and
regulations, including export laws and regulations of the United States.
Licensee will not, without the prior authorization of Symbol Technologies
and the appropriate governmental authority of the United States, in any
form export or re-export, sell or resell, ship or reship, or divert, through
direct or indirect means, any item or technical data or direct or indirect
products sold or otherwise furnished to any person within any territory for
which the United States Government or any of its agencies at the time of
the action, requires an export license or other governmental approval.
Violation of this provision will be a material breach of this Agreement,
permitting immediate termination by Symbol Technologies.
Third Party Software. The Products may contain one or more items of
Third-Party Software. The terms of this Agreement govern your use of
any Third-Party Software UNLESS A SEPARATE THIRD-PARTY
SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF
THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE
SEPARATE THIRD-PARTY LICENSE.
Open Source Software. The Products may contain one or more items of
Open Source Software. Open Source Software is software covered by a
publicly available license governed solely under Copyright law, whereas
the complete terms and obligations of such license attach to a licensee
solely through the act of copying, using and/or distribution of the licensed
software, such obligations often include one or more of attribution
obligations, distribution obligations, copyleft obligations, and intellectual
property encumbrances. The use of any Open Source Software is
subject to the terms and conditions of this Agreement as well as the
terms and conditions of the corresponding license of each Open Source
Software package. If there is a conflict between the terms and conditions
of this Agreement and the terms and conditions of the Open Source
Software license, the applicable Open Source Software license will take
precedence. Copies of the licenses for the included Open Source
Software, if any, as well as their attributions, acknowledgements, and
software information details, are provided in the electronic copy of this
Agreement, which is available in the Legal Notices or README file
associated with the Product. Symbol Technologies is required to
reproduce the software licenses, acknowledgments and copyright
notices as provided by the authors and owners, thus, all such information
is provided in its native language form, without modification or
translation.
Depending on the license terms of the specific Open Source Software,
source code may not be provided. Please reference and review the
entire Open Source Software information to identify which Open Source
Software packages have source code provided or available. For
instructions on how to obtain a copy of any source code made publicly
available by Symbol Technologies related to Open Source Software
distributed by Symbol Technologies, you may send your request
(including the Symbol Technologies Product name and version, along
with the Open Source Software specifics) in writing to: Symbol
Technologies, Inc., Open Source Software Management, One Motorola
Plaza Holtsville, NY USA.
To view additional information regarding licenses, acknowledgments and
required copyright notices for open source packages used in this Symbol
Technologies product, touch Settings > About phone > Legal
information > Open source licenses.
Service Information
If you have a problem using the equipment, contact your facility’s
Technical or Systems Support. If there is a problem with the equipment,
they will contact the Global Support Center at: http://
www.motorolasolutions.com/support.
For the latest version of this guide go to: http://
supportcentral.motorolasolutions.com.
CMM Disclosure
Marking and European Economic Area (EEA)
韥눺ꙹ ꩡ끞녅껽驩ꓭ
i ἽGὤὤ
O ᴴ㥉㟝 ⵝ㋕䋩㐔
ὤ㣄㣠 P
㢨 ὤὤ⏈ ᴴ㥉㟝 Oi Ἵ P 㤸㣄䑀㤵䚝ὤὤ⦐㉐
㨰⦐ ᴴ㥉㜄㉐ ㇠㟝䚌⏈ ᶷ㡸 ⯝㤵㡰⦐ 䚌⮤ S
⯜☔G㫴㜡㜄㉐G㇠㟝䚔G㍌G㢼㏩⏼␘ .
Waste Electrical and Electronic
Equipment (WEEE)
䜞Ԭ〦
(Parts)
ᴿ∈ᴿᇩ⢟䍞ᡌݹ㍖
䫻
(Pb)
⊔
(Hg)
䭿
(Cd)
ޣԭ
䬢
(Cr
6+
)
ཐ⓪㚊
㤥
(PBB)
ཐ⓪ӂ㤥
䟐
(PBDE)
䠇ኔ䜞Ԭ
(Metal Parts)
OOO O O O
⭫䐥⁗ඍ
(Circuit Modules)
XOO O O O
⭫㔼⭫㔼㓺Ԭ
(Cables and Cable
Assemblies)
OOO O O O
ງᯏૂ㚐ਾ⢟䜞Ԭ
(Plastic and
Polymeric Parts)
OOO O O O
ݿᆜૂݿᆜ㓺Ԭ
(Optics and Optical
Components)
XOX O O O
⭫⊖
(Batteries)
XOO O O O
PRELIMINARY