Symbol Technologies TC75AH Touch Computer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2559990
Application ID	j+yl9/SoHjs6bit954FYsQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	108.05kB (1350648 bits)
Date Submitted	2015-03-19 00:00:00
Date Available	2015-09-15 00:00:00
Creation Date	2017-10-11 13:15:03
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-11 13:15:03
Document Title	TC75 Regulatory Guide [English] (P/N MN001704A01 Rev. A)
Document Creator	FrameMaker 12.0.4
Document Author:	Zebra Technologies Corporation

TC75
REGULATORY
GUIDE
Regulatory Information
This device is approved under Symbol Technologies, Inc., a Zebra
Technologies company.
This guide applies to the Model Number: TC75AH and TC75BH.
All Zebra devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as
required.
Local language translations are available at the following website:
http://www.zebra.com/support.
Any changes or modifications to Zebra equipment, not expressly
approved by Zebra, could void the user's authority to operate the
equipment.
CAUTION
Only use Zebra approved and UL Listed
accessories, battery packs and battery chargers.
Avertissement: Le dispositive fonctionnant dans la bande 5150 5250 MHz est réservé uniquement pour une utilisation à l'intérieur
afin de réduire les risques de brouillage préjudiciable aux systèmes
de satellites mobiles utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bands
5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars pourraient
causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
2.4 GHz
The available channels for 802.11 b/g operation in the US are
Channels 1 to 11. The range of channels is limited by firmware.
Health and Safety Recommendations
Ergonomic Recommendations
CAUTION
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be
dry before connecting to an external power
source.
Declared maximum operating temperature: 50°C.
UL Listed Products with GPS
Underwriters Laboratories Inc. (UL) has not tested the performance
or reliability of the Global Positioning System (GPS) hardware,
operating software or other aspects of this product. UL has only
tested for fire, shock or casualties as outlined in UL's Standard(s)
for Safety for Information Technology Equipment, UL60950-1. UL
Certification does not cover the performance or reliability of the
GPS hardware and GPS operating software. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR
RELIABILITY OF ANY GPS RELATED FUNCTIONS OF THIS
PRODUCT.
Bluetooth® Wireless Technology
We reserves the right to make changes to any product to improve
reliability, function, or design. We do not assume any product liability
arising out of, or in connection with, the application or use of any product,
circuit, or application described herein. No license is granted, either
expressly or by implication, estoppel, or otherwise under any patent right
or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which our products might be
used. An implied license exists only for equipment, circuits, and
subsystems contained in the products.
Warranty
For the complete hardware product warranty statement, go to: http://
www.zebra.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s
Technical or Systems Support. If there is a problem with the equipment,
they will contact the Global Support Center at: http://www.zebra.com/
support.
For the latest version of this guide go to: http://www.zebra.com/support.
This is an approved Bluetooth product. For more information or to
view the End Product Listing, please visit http://www.bluetooth.org/
tpg/listings.cfm.
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the
device signifying the radio(s) are approved for use in the following
countries: United States, Canada, Japan, China, S. Korea,
Australia, and Europe. Please refer to the Declaration of Conformity
(DoC) for details of other country markings. This is available at
http://www.zebra.com/doc.
Note: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
Operation of the device without regulatory approval is
illegal.
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (including safety systems).
Check with the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in the area
over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
Position your device within easy reach. Be able to access your
device without removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to
sound or lights to flash, on receipt of a call on public roads, is not
permitted.
IMPORTANT
Before installing or using, check state and local laws regarding
windshield mounting and use of equipment.
For Safe installation
• Do not put your phone in a location that obstructs the drivers
vision or interferes with the operation of the Vehicle.
• Do not cover an airbag.
Safety on the Road
This device incorporates the International Roaming feature
(IEEE802.11d) which will ensure the product operates on the
correct channels for the particular country of use.
Do not take notes or use the device while driving. Jotting down a “to
do” list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full
attention to driving. Check the laws and regulations on the use of
wireless devices in the areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice
good common sense and remember the following tips:
1. Get to know your wireless device and any features such as
speed dial and redial. If available, these features help you to
place your call without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice, and even heavy
traffic can be hazardous.
5 GHz Only
MN001704A01 Rev. A — February 2015
Reduce or eliminate repetitive motion
Maintain a neutral postures
Reduce or eliminate excessive force
Keep objects that are used frequently within easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures
Country Roaming
Frequency of Operation – IC
Zebra Technologies Corporation
Lincolnshire, IL, U.S.A.
http://www.zebra.com
Zebra and the Zebra head graphic are registered trademarks of ZIH
Corp. The Symbol logo is a registered trademark of Symbol
Technologies, Inc., a Zebra Technologies company.
© 2015 Symbol Technologies, Inc. All Rights Reserved.
•
•
•
•
•
•
•
•
•
•
•
In order to avoid or minimize the potential risk of
ergonomic injury follow the recommendations
below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your
company’s safety programs to prevent employee
injury.
The use in the UNII (Unlicensed National Information Infrastructure)
band 1 (5150-5250 MHz) is restricted to Indoor Use Only; any other
use will make the operation of this device illegal.
Industry Canada Statement
Caution: The device for the band 5150 - 5250 MHz is only for
indoor usage to reduce potential for harmful interference to coChannel mobile satellite systems. High power radars are allocated
as primary users (meaning they have priority) of 5250 - 5350 MHz
and 5650 - 5850 MHz and these radars could cause interference
and/or damage to LE-LAN devices.
4. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
5. Do not engage in stressful or emotional conversations that may
be distracting. Make people you are talking with aware you are
driving and suspend conversations that have the potential to
divert your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency
services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless
phone! The call can be made regardless of any security codes
and depending on a network, with or without a SIM card
inserted.
7. Use your wireless phone to help others in emergencies. If you
see an auto accident, crime in progress or other serious
emergency where lives are in danger, call the Emergency
Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local
emergency number, as you would want others to do for you.
8. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other special nonemergency wireless number.
“The wireless industry reminds you to use your device / phone
safely when driving.”
RF Exposure Guidelines
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions
supplied.
International
The device complies with internationally recognized standards
covering human exposure to electromagnetic fields from radio
devices. For information on “International” human exposure to
electromagnet fields refer to the Zebra Declaration of Conformity
(DoC) at http://www.zebra.com/doc. For further information on the
safety of RF energy from wireless devices - see http://
responsibility.zebra.com/index.php/downloads. Located under
Wireless Communications and Health.
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use only
Zebra tested and approved belt-clips, holsters, and similar
accessories to ensure EU Compliance.
US and Canada
Phones (placed to ear or used with headset)
Please observe all warning notices with regard to the usage of
wireless devices.
Potentially Hazardous Atmospheres – Vehicles Use
Co-located Statement
You are reminded of the need to observe restrictions on the use of
radio devices in fuel depots, chemical plants etc. and areas where
the air contains chemicals or particles (such as grain, dust, or metal
powders) and any other area where you would normally be advised
to turn off your vehicle engine.
To comply with FCC RF exposure compliance requirement, the
antenna used for this transmitter must not be co-located or
operating in conjunction with any other transmitter/antenna except
those already approved in this filing.
Safety in Aircraft
This device was tested for typical body-worn operation. Use only
Zebra tested and approved belt-clips, holsters, and similar
accessories to ensure FCC Compliance. The use of third-party beltclips, holsters, and similar accessories may not comply with FCC
RF exposure compliance requirements, and should be avoided
To satisfy US and Canadian RF exposure requirements, a
transmitting device must operate with a minimum separation
distance of 1.5 cm or more from a person's body.
Pour satisfaire aux exigences Américaines et Canadiennes
d'exposition aux radiofréquences, un dispositif de transmission doit
fonctionner avec une distance de séparation minimale de 1.5 cm ou
plus de corps d'une personne.
Switch off your wireless device whenever you are instructed to do
so by airport or airline staff. If your device offers a 'flight mode' or
similar feature, consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect
medical electrical equipment.
Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics or healthcare facilities.
These requests are designed to prevent possible interference with
sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm
(6 inches) be maintained between a handheld wireless device and a
pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with independent research
and recommendations by Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches)
from their pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimize the
potential for interference.
• If you have any reason to suspect that interference is taking
place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical
device, to determine if the operation of your wireless product may
interfere with the medical device.
Safety Information
Use only Zebra tested and approved belt-clips, holsters, and similar
accessories to ensure FCC Compliance. The use of third-party beltclips, holsters, and similar accessories may not comply with FCC
RF exposure compliance requirements, and should be avoided.
The FCC has granted an Equipment Authorization for these model
phones with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on these
model phones is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/ea/fccid.
Warnings for Use of Wireless Devices
Scanner Labeling
Handheld
Laser Devices
Class 2 laser scanners use a low power, visible light diode. As with
any very bright light source, such as the sun, the user should avoid
staring directly into the light beam. Momentary exposure to a Class
2 laser is not known to be harmful.
The following statement is required to comply with US and
international regulations.
CAUTION: Use of controls, adjustments or performance of
procedures other than those specified herein may result in
hazardous laser light exposure.
When batteries are stored over six (6) months, some irreversible
deterioration in overall battery quality may occur. Store batteries at
half of full charge in a dry, cool place, removed from the equipment
to prevent loss of capacity, rusting of metallic parts and electrolyte
leakage. When storing batteries for one year or longer, the charge
level should be verified at least once a year and charged to half of
full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is one year,
regardless if the battery was purchased separately or included as
part of the mobile computer. For more information on Zebra
batteries, please visit: www.zebra.com/batterybasics.
Battery Safety Guidelines
•
Labels read:
1. LASER/LED LIGHT - DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER/1M
LED PRODUCT.
2. CAUTION - CLASS 2 LASER, 1M LED LIGHT WHEN OPEN. DO
NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS.
3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED
JUNE 24, 2007, AND IEC 60825-1:2007 (Ed.1.2, 2.0), EN608251:2007 & IEC 62471:2006 (Ed.1.0); EN 62471:2008.
LED Devices
For LED devices which have been evaluated to IEC 62471 and
comply with the Exempt Risk Group, no product labeling
requirements apply. However, the following statement is required to
comply with US and international regulations:
LED Compliance Statement:
Classified as “EXEMPT RISK GROUP” according to IEC
62471:2006 and EN 62471:2008
Pulse duration: 1.7 ms
Power Supply
Use ONLY a UL LISTED ITE (IEC/EN 60950-1, LPS) power supply
with electrical ratings: Output 5.4 VDC, min 3.0 A, with a maximum
ambient temperature of at least 50 °C. Use of alternative power
supply will invalidate any approvals given to this unit and may be
dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection
Administration) requires dry battery producing
or importing firms in accordance with Article
15 of the Waste Disposal Act are required to
indicate the recycling marks on the batteries used in sales,
giveaway or promotion. Contact a qualified Taiwanese recycler for
proper battery disposal.
Battery Information
CAUTION
Risk of explosion if battery is replaced by an
incorrect type. Dispose of batteries according to
instructions.
Use only Zebra approved batteries. Accessories which have battery
charging capability are approved for use with the following battery
models:
• 82-171249-01 (3.7 VDC, 4500 mAh)
Zebra rechargeable battery packs are designed and constructed to
the highest standards within the industry.
However, there are limitations to how long a battery can operate or
be stored before needing replacement. Many factors affect the
actual life cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.
The area in which the units are charged should be clear of
debris and combustible materials or chemicals. Particular care
should be taken where the device is charged in a non
commercial environment.
• Follow battery usage, storage, and charging guidelines found in
the User Guide.
• Improper battery use may result in a fire, explosion, or other
hazard.
• To charge the mobile device battery, the battery and charger
temperatures must be between +32 ºF and +104 ºF (0 ºC and
+40 ºC).
• Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any questions
about the compatibility of a battery or a charger, contact Zebra
Support.
• For devices that utilize a USB port as a charging source, the
device shall only be connected to products that bear the USB-IF
logo or have completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform, puncture,
or shred.
• Severe impact from dropping any battery-operated device on a
hard surface could cause the battery to overheat.
• Do not short circuit a battery or allow metallic or conductive
objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects
into the battery, immerse or expose to water or other liquids, or
expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might
get very hot, such as in a parked vehicle or near a radiator or
other heat source. Do not place battery into a microwave oven
or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used rechargeable batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been
swallowed.
• In the event of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash
the affected area with large amounts of water and seek medical
advice.
• If you suspect damage to your equipment or battery, contact
Global Customer Support to arrange for inspection.
This device is marked HAC showing compliance with the applicable
requirements of IC CS-03-Part 5.
Use with Hearing Aids- FCC
When some wireless devices are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and wireless devices
also vary in the amount of interference they generate. In the event
of interference you may want to consult your hearing aid supplier to
discuss solutions.
The wireless telephone industry has developed ratings for some of
their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not all
phones have been rated. Zebra terminals that are rated have the
rating included on the Declaration of Conformity (DoC) at http://
www.zebra.com/doc
The ratings are not guarantees. Results will vary depending on the
user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
ANSI C63.19 rating system
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing device's telecoil (“T Switch”
or “Telephone Switch”) than unrated phones. T4 is the better/higher
of the two ratings. (Note that not all hearing devices have telecoils in
them.)
Hearing devices may also be measured for immunity to this type of
interference. Your hearing device manufacturer or hearing health
professional may help you find results for your hearing device. The
more immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
Hearing Aid Compatibility
This phone has been tested and rated for use with hearing aids for
some of the wireless technologies that it uses. However, there may
be some newer wireless technologies used in this phone that have
not been tested yet for use with hearing aids. It is important to try
the different features of this phone thoroughly and in different
locations, using your hearing aid or cochlear implant, to determine if
you hear any interfering noise. Consult your service provider or the
manufacturer of this phone for information on hearing aid
compatibility. If you have questions about return or exchange
policies, consult your service provider or phone retailer.
This phone has been tested to ANSI C63.19 and rated for use with
hearing aids as follows,
• TC75AH: M3/T3.
This device is marked HAC showing compliance with the applicable
requirements of the FCC.
This device is not HAC compliant during Voice Over IP / WLAN
(VOIP) calls.
Radio Frequency Interference RequirementsFCC
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
The use of 5 GHz WLAN's, for use in the US, have the following
restrictions:
• Notched Band 5.60 - 5.65 GHz.
Radio Frequency Interference Requirements Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
exposição da Taxa de Absorção Específica referente a campos
elétricos, magnéticos e eletromagnéticos de radiofrequência, de
acordo com as Resoluções n° 303/2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes de
exposição à radiofrequência quando posicionado pelo menos 1.5
centímetros de distância do corpo. Para maiores informações,
consulte o site da Anatel.
Radio Transmitters
Chile
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following
restrictions:
• Restricted Band 5.60 - 5.65 GHz
This device is in compliance with the NRC for Industry Canada
applicable to license-exempt radios. Use is allowed with the
following two conditions: (1) the device must not produce
interference, and (2) the device must accept any interference to the
radio, even if the interference is likely to compromise operation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes: (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
Label Marking: The Term “IC:” before the radio certification only
signifies that Industry Canada technical specifications were met.
Este equipo cumple con la Resolución No 403 de 2008, de la
Subsecretaria de telecomunicaciones, relativa a radiaciones
electromagnéticas.
Marking and European Economic Area (EEA)
The use of 2.4 GHz RLAN's, for use through the EEA, have the
following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Bluetooth® Wireless Technology for use through the EEA has the
following restrictions:
• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 - 2.4835 GHz.
Statement of Compliance
Zebra hereby, declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive
1999/5/EC and 2011/65/EU. A Declaration of Conformity may be
obtained from http://www.zebra.com/doc.
TURKISH WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur
Korea Warning Statement for Class B ITE
기 종별
사용자안내문
B 급 기기
이 기기는 가정용 (B 급 ) 전자파적합기기로서
( 가정용 방송통신 주로 가정에서 사용하는 것을 적으로 하며 ,
든 지역에서 사용할 수 있습니다 .
기자재 )
Other Countries
Australia
通过访问以下网址可下载当地语言支持的产品说明书
http://www.zebra.com/contact.
确认进网标贴和证书真伪可查询网址 : http://www.tenaa.com.cn/
Hong Kong
In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for
indoor operation only.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
South Korea
해당무선설비는 운용 중 전파혼신 가능성이 있음
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된
서비스는 할 수 없습니다 .
Taiwan
臺灣
低 率電波輻射性電機管理辦法
第十二條
經型式認證合格之低 率射頻電機，非經許可，公司 商號或
使用者均不得擅自變更頻率
大 率或變更原設計之特性及
能
第十四條
低 率射頻電機之使用不得影響飛航安 及干擾合法通信；經
發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續
使用
前項合法通信，指依電信規定作業之無線電通信
低 率射頻電機須忍受合法通信或工業 科學及醫療用電波輻
射性電機設備之干擾
在 5.25 - 5.35 秭赫頻帶 操作之無線資訊傳輸設備，限於室
使用
減少電磁波影響，請妥適使用
Use of 5 GHz RLAN's in Australia is restricted in the following band
5.60 - 5.65GHz.
型號 TC75AH: SAR 標準值 2.0W/kg
Brazil
Turkey
Regulatory declarations for TC75AH - BRAZIL
For more information consult the website www.anatel.gov.br
Declarações Regulamentares para TC75AH - Brazil
Nota: “A marca de certificação se aplica ao Transceptor, modelo
TC700H. Este equipamento opera em caráter secundário, isto é,
não tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.”
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br.
Este equipamento opera em caráter secundário, isto é, não tem
direito a proteção contra interferência prejudicial, mesmo de
estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
Este produto está homologado pela Anatel, de acordo com os
procedimentos regulamentados pela Resolução n°242/2000 e
atende aos requisitos técnicos aplicados, incluindo os limites de
Bu cihaz Türkçe karakterlerin tamamını ihtiva eden ETSI TS
123.038 V8.0.0 (veya sonraki sürümün kodu) ve ETSI TS 123.040
V8.1.0 (veya sonraki sürümün kodu) teknik özelliklerine uygundur.
送測產品實測值為 xxxW/kg
Ukraine
і
є
ящ
ч х
х іч
Thailand
คร อง ทรคมนาคม ละอ ป ร  นี
มี ความ อ คล อง าม  อ ํา น อง ทช .
я
х
я х
English: For EU Customers: All products at the end of their life
must be returned to Zebra for recycling. For information on how to
return product, please go to: http://www.zebra.com/weee.
Français: Clients de l'Union Européenne : Tous les produits en fin
de cycle de vie doivent être retournés à Zebra pour recyclage. Pour
de plus amples informations sur le retour de produits, consultez :
http://www.zebra.com/weee.
China
Д
я і
№1057, № 2008
ч х ч
Waste Electrical and Electronic
Equipment (WEEE)
ях.
Español: Para clientes en la Unión Europea: todos los productos
deberán entregarse a Zebra al final de su ciclo de vida para que
sean reciclados. Si desea más información sobre cómo devolver un
producto, visite: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am
Ende ihrer Lebensdauer zum Recycling an Zebra zurückgesandt
werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al
termine del rispettivo ciclo di vita devono essere restituiti a Zebra al
fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://www.zebra.com/
weee.
Português: Para clientes da UE: todos os produtos no fim de vida
devem ser devolvidos à Zebra para reciclagem. Para obter
informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het
einde van hun levensduur naar Zebra te worden teruggezonden
voor recycling. Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: Klตencต z obszaru กnตต Europejskตej: Produkty wycofane z
eksploatacjต naleźy zwrócตć do fตrmy Zebra w celu ตcด utylตzacjต.
Informacje na temat zwrotu produktów znajdują sตę na stronตe
ตnternetowej ดttp://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po
skonèení jejich životnosti vrátit spoleènosti Zebra k recyklaci.
Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes
tagastada taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni
saamiseks toote tagastamise kohta külastage palun aadressi: http://
www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a
Zebra vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson
el a http://www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Zebra za reciklažo. Za informacije o
vraèilu izdelka obišèite: http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin
livslängd måste returneras till Zebra för återvinning. Information om
hur du returnerar produkten finns på
http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on
palautettava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää
käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://
www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til
recirkulering, når de er udtjent. Læs oplysningerne om returnering
af produkter på: http://www.zebra.com/weee.
Ε
η
ά: Γ α π
Ε.Ε.: Ό α α π ο
α, ο
ο
ου , π π α π
φο α
Zebra γ α
α α
. Γα π
π
οφο
χ
π
οφ
π ο
ο , π
φ
υ
http://
www.zebra.com/weee ο ∆ α
υο.
α
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar talħajja ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għarriċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť
po uplynutí doby ich životnosti vrátené spoločnosti Zebra na
recykláciu. Bližšie informácie o vrátení výrobkov nájdete na: http://
www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją „Zebra“.
Daugiau informacijos, kaip grąžinti gaminį, rasite: http://
www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža
beigām ir jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu
informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet: http://
www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri
dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade
edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://
www.zebra.com/weee.
Software Support
Zebra wants to ensure that customers have the latest release of
entitled software at the time of product purchase.
To confirm that your Zebra device shipped with the latest release of
entitled software, visit: www.zebra.com/support. Check for the latest
software from Software Downloads > Product Line/Product > Go.
If your device does not have the latest entitled software release as
of your product purchase date, please e-mail a request to:
entitlementservices@zebra.com.
You must include the following essential device information with
your request:
• Model number
• Serial number
• Proof of purchase
• Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest
software release, you will receive an e-mail containing a link
directing you to a Zebra Web site to download the appropriate
software.
Symbol Technologies, Inc. End User License
Agreement
BY INSTALLING AND/OR USING THIS PRODUCT, YOU
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT,
UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF YOU
DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, SYMBOL
TECHNOLOGIES IS NOT WILLING TO LICENSE THE PRODUCT TO
YOU, AND YOU MUST NOT USE OR INSTALL THIS PRODUCT.
Grant of License. Symbol Technologies grants you (“Licensee” or “you”)
a personal, nonexclusive, nontransferable, nonassignable, no cost
license to use the software and documentation (“Product(s)”) subject to
the terms and conditions of this Agreement. You shall use the Products
only for your internal business purposes, exclusively to support Symbol
Technologies devices. Any use of the Products outside of the conditions
set forth herein is strictly prohibited and will be deemed a breach of this
Agreement resulting in immediate termination of your License. In the
event of a breach of this Agreement, Symbol Technologies will be
entitled to all available remedies at law or in equity (including immediate
injunctive relief and repossession of all Products unless Licensee is a
Federal agency of the United States Government).
You shall not distribute, sublicense, rent, loan, lease, export, re-export,
resell, ship or divert or cause to be exported, re-exported, resold,
shipped or diverted, directly or indirectly, the Products under this
Agreement. You shall not, and shall not permit others to: (i) modify,
translate, decompile, bootleg, reverse engineer, disassemble, or extract
the inner workings of the Products, (ii) copy the look-and-feel or
functionality of the Products; (iii) remove any proprietary notices, marks,
labels, or logos from the Products; (iv) rent or transfer all or some of the
Products to any other party without Symbol Technologies' prior written
consent; or (v) utilize any computer software or hardware which is
designed to defeat any copy protection device, should the Products be
equipped with such a protection device.
Title to all copies of Products will not pass to Licensee at any time and
remains vested exclusively in Symbol Technologies. All intellectual
property developed, originated, or prepared by Symbol Technologies in
connection with the Products remain vested exclusively in Symbol
Technologies, and this Agreement does not grant to Licensee any
intellectual property rights.
Portions of the Products are protected by United States patent and
copyright laws, international treaty provisions, and other applicable laws.
Therefore, you must treat the Products like any other copyrighted
material (e.g., a book or musical recording) except that you may make
one copy of the Product solely for back-up purposes. Unauthorized
duplication of the Products constitutes copyright infringement, and in the
United States is punishable in federal court by fine and imprisonment.
Disclaimer. SYMBOL TECHNOLOGIES MAKES, AND YOU RECEIVE,
NO WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED,
STATUTORY, OR IN ANY COMMUNICATION WITH YOU. SYMBOL
TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY WARRANTY
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILTY,
NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE.
THE PRODUCTS ARE PROVIDED “AS IS.” SYMBOL TECHNOLOGIES
DOES NOT WARRANT THAT THE PRODUCTS WILL MEET YOUR
REQUIREMENTS, OR THAT THE OPERATION OF THE PRODUCTS
WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT DEFECTS
IN THE PRODUCTS WILL BE CORRECTED. SYMBOL
TECHNOLOGIES MAKES NO WARRANTY WITH RESPECT TO THE
CORRECTNESS, ACCURACY, OR RELIABILITY OF THE PRODUCTS.
Some jurisdictions do not allow the exclusion of implied warranties, so
the above exclusion may not apply to you.
Limitation of Liability. THE TOTAL LIABILITY OF SYMBOL
TECHNOLOGIES UNDER THIS AGREEMENT FOR DAMAGES SHALL
NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS
LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL SYMBOL
TECHNOLOGIES BE LIABLE IN ANY WAY FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF
ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS
PROFITS, OR LIABILITY OR INJURY TO THIRD PERSONS,
WHETHER FORESEEABLE OR NOT, REGARDLESS OF WHETHER
SYMBOL TECHNOLOGIES HAS BEEN ADVISED OF THE
POSSIBLITY OF SUCH DAMAGES. Some jurisdictions do not permit
limitations of liability for incidental or consequential damages, so the
above exclusions may not apply to you. This Limitation of Liability
provision survives the termination of this Agreement and applies
notwithstanding any contrary provision in this Agreement. Licensee must
bring any action under this Agreement within one (1) year after the cause
of action arises.
Maintenance. Unless provided for in a separate agreement, Symbol
Technologies shall not be responsible for maintenance or field service of
the Products.
High Risk Activities. The Products are not fault-tolerant and are not
designed, manufactured or intended for use or resale as on-line control
software in hazardous environments requiring fail-safe performance,
such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines,
or weapons systems, in which the failure of the Products could lead
directly to death, personal injury, or severe physical or environmental
damage (“High Risk Activities”). Symbol Technologies and its suppliers
specifically disclaim any express or implied warranty of fitness for High
Risk Activities, and if you elect to use the Products in any High Risk
Activities, you agree to indemnify, defend, and hold Symbol Technologies
harmless from and against any and all costs, damages, and losses
related to that use.
U.S. Government. If you are acquiring the Products on behalf of any unit
or agency of the U.S. Government, the following shall apply. Use,
duplication, or disclosure of the Products is subject to the restrictions set
forth in subparagraphs (c) (1) and (2) of the Commercial Computer
Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if
applicable, unless being provided to the Department of Defense. If being
provided to the Department of Defense, use, duplication, or disclosure of
the Products is subject to the restricted rights set forth in subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may
not include a Restricted Rights notice, or other notice referring
specifically to the terms and conditions of this Agreement. The terms and
conditions of this Agreement shall each continue to apply, but only to the
extent that such terms and conditions are not inconsistent with the rights
provided to you under the aforementioned provisions of the FAR and
DFARS, as applicable to the particular procuring agency and
procurement transaction.
Governing Law. This Agreement shall be governed by the laws of the
United States of America to the extent that they apply and otherwise by
the laws of the State of New York without regard to its conflict of laws
provisions.
Compliance with Laws. Licensee will comply with all applicable laws and
regulations, including export laws and regulations of the United States.
Licensee will not, without the prior authorization of Symbol Technologies
and the appropriate governmental authority of the United States, in any
form export or re-export, sell or resell, ship or reship, or divert, through
direct or indirect means, any item or technical data or direct or indirect
products sold or otherwise furnished to any person within any territory for
which the United States Government or any of its agencies at the time of
the action, requires an export license or other governmental approval.
Violation of this provision will be a material breach of this Agreement,
permitting immediate termination by Symbol Technologies.
Third Party Software. The Products may contain one or more items of
Third-Party Software. The terms of this Agreement govern your use of
any Third-Party Software UNLESS A SEPARATE THIRD-PARTY
SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF
THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE
SEPARATE THIRD-PARTY LICENSE.
Open Source Software. The Products may contain one or more items of
Open Source Software. Open Source Software is software covered by a
publicly available license governed solely under Copyright law, whereas
the complete terms and obligations of such license attach to a licensee
solely through the act of copying, using and/or distribution of the licensed
software, such obligations often include one or more of attribution
obligations, distribution obligations, copyleft obligations, and intellectual
property encumbrances. The use of any Open Source Software is
subject to the terms and conditions of this Agreement as well as the
terms and conditions of the corresponding license of each Open Source
Software package. If there is a conflict between the terms and conditions
of this Agreement and the terms and conditions of the Open Source
Software license, the applicable Open Source Software license will take
precedence. Copies of the licenses for the included Open Source
Software, if any, as well as their attributions, acknowledgments, and
software information details, are provided in the electronic copy of this
Agreement, which is available in the Legal Notices or README file
associated with the Product. Symbol Technologies is required to
reproduce the software licenses, acknowledgments and copyright
notices as provided by the authors and owners, thus, all such information
is provided in its native language form, without modification or
translation.
Depending on the license terms of the specific Open Source Software,
source code may not be provided. Please reference and review the
entire Open Source Software information to identify which Open Source
Software packages have source code provided or available. For
instructions on how to obtain a copy of any source code made publicly
available by Symbol Technologies related to Open Source Software
distributed by Symbol Technologies, you may send your request
(including the Symbol Technologies Product name and version, along
with the Open Source Software specifics) in writing to: Symbol
Technologies, Inc., Open Source Software Management, One Motorola
Plaza Holtsville, NY USA.
To view additional information regarding licenses, acknowledgments and
required copyright notices for open source packages used in this Symbol
Technologies product, touch Settings > About phone > Legal
information > Open source licenses.
Service Information
If you have a problem using the equipment, contact your facility’s
Technical or Systems Support. If there is a problem with the equipment,
they will contact the Global Support Center at: http://www.zebra.com/
support.
For the latest version of this guide go to: http://www.zebra.com\support.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Author                          : Zebra Technologies Corporation
Create Date                     : 2007:11:13 15:03:37Z
Keywords                        : TC75, RG, Regulatory, Guide
Modify Date                     : 2015:02:24 15:38:51-05:00
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : FrameMaker 12.0.4
Metadata Date                   : 2015:02:24 15:38:51-05:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : TC75 Regulatory Guide [English] (P/N MN001704A01 Rev. A)
Creator                         : Zebra Technologies Corporation
Copyright                       : 2015
Document ID                     : uuid:9d0689dc-cd21-4610-b581-1da4dfc87767
Instance ID                     : uuid:b3224279-2513-4b73-9d27-59a4910de940
Page Mode                       : UseNone
Page Count                      : 2

EXIF Metadata provided by EXIF.tools