Symbol Technologies TM1000 Trailer Monitoring Unit User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2332296
Application ID	hW3sLQfi6qIpJ0NK/EEhOw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.19kB (214823 bits)
Date Submitted	2014-07-22 00:00:00
Date Available	2015-01-18 00:00:00
Creation Date	2007-03-26 15:25:40
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2014-07-18 14:31:40
Document Title	untitled
Document Creator	FrameMaker 10.0.2

MN000908A01b.fm Page 1 Sunday, July 13, 2014 10:27 PM
TLA TRAILER MONITORING UNIT (TMU)
Regulatory Guide
Regulatory Information
This device is approved under Symbol Technologies, Inc.
This guide applies to Model Number: TM1000
All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and
will be labeled as required.
Any changes or modifications to Symbol equipment, not expressly approved by Symbol, could void the
user's authority to operate the equipment.
CAUTION
Only use Symbol approved and UL Listed accessories.
Declared maximum operating temperature: 50°C.
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the device signifying the radio(s) are approved for
use in the following countries: United States.
Operation of the device without regulatory approval is illegal.
Frequency of Operation - FCC
2.4 GHz Only. The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of
channels is limited by firmware.
Warning for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
For further information on the safety of RF energy from wireless devices, go to:
http://responsibility.motorolasolutions.com/index.php/downloads/.
Located under Wireless Communications and Health.
US
Co-located statement. To comply with FCC RF exposure compliance requirement, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other transmitter/antenna except
those already approved in this filling.
To satisfy US RF exposure requirements, a transmitting device must operate with a minimum separation
distance of 20 cm or more from a person's body. The minimum separation distance 20 cm must match the
distance established in the SAR Test report.
Laser Devices
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose.
For Class 1 devices replace the label with the following label as appropriate.
MN000908A01b.fm Page 2 Sunday, July 13, 2014 10:27 PM
Laser Warning Label-Class 1
(No Color Requirement)
- Class 1 Laser Product
- COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER
NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC 60825-1:2007 (Ed. 2.0); EN 60825-1:2007.
Caution - Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Radio Frequency Interference Requirements - FCC
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Service
If you have a problem using the equipment, contact your facility's Technical or Systems Support. If there is a
problem with the equipment, they will contact the Global Customer Support Center at:
http://www.motorolasolutions.com/support.
For detailed documentation and the latest version of this guide go to:
http://www.motorolasolutions.com/support.
© 2014 Symbol Technologies, Inc. All rights reserved.
Symbol Technologies reserves the right to make changes to any product to improve reliability, function, or
design. Symbol Technologies does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or
patent, covering or relating to any combination, system, apparatus, machine, material, method, or process
in which Symbol Technologies products might be used. An implied license exists only for equipment, circuits,
and subsystems contained in Symbol Technologies products.
Warranty
For the complete hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty.
Symbol Technologies, Inc.
One Motorola Plaza
Holtsville, New York 11742, USA
1-800-927-9626
http://www.motorolasolutions.com
Symbol® is a registered trademark, and The Enterprise Mobility Company is a trademark of Symbol
Technologies, Inc. All other trademarks and service marks are proprietary to their respective
owners. © 2014 Symbol Technologies, Inc. All Rights Reserved.
MN000908A01 Revision B — July 2014

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : FrameMaker 10.0.2
Modify Date                     : 2014:07:18 14:31:40+08:00
Create Date                     : 2007:03:26 15:25:40Z
Metadata Date                   : 2014:07:18 14:31:40+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:c40c942d-2a5b-4e37-bdc0-92470f674b31
Instance ID                     : uuid:f97d6fbf-dcaa-4f03-9864-63bdd5a0c863
Page Count                      : 2
Language                        : en
Creator                         : FrameMaker 10.0.2

EXIF Metadata provided by EXIF.tools