Syncomm Technology C2ETRUI24R IA2E DUPLEX CARDTYPE DIGITAL AUDIO TRANSCEIVER User Manual IA2E Wireless Card type V0
Syncomm Technology Corp. IA2E DUPLEX CARDTYPE DIGITAL AUDIO TRANSCEIVER IA2E Wireless Card type V0
Users Manual Revised
User Manual SYNIC-IA2E Product ďź IA2E Wireless Card type Dongle Model Name ďź C2ENSCTRUI00024R1 Version 0.1 Nov. 9 2009 Syncomm Technology Corp. 6F-15, No. 81, Shuei-Li Rd., Hsinchu City, Taiwan, R.O.C. Tel: +886-3-5169188 Fax: +886-3-5169111 http://www.syncomm.com.tw SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw page - 1 - INDEX 1. 2. 3. 4. Audio Play...................................................................................................................................................................2 ID Learn......................................................................................................................................................................3 Federal Communication Commission Interference Statement..................................................................................4 Revision History..........................................................................................................................................................5 This document is proprietary and confidential to Syncomm Technology Corp. SYNIC and Intelligent Wireless are trademarks of Syncomm Technology Corp. All other trademarks and registered trademarks are the property of their respective owners. SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA2E Wireless Cardtype Dongle User Manual page - 2 - 1. Audio Play a. With the TV turned off, insert the TX card into the TX Card Connection(Wireless) on the side of the main unit. b. Hold the TX card so that the slotted side faces to the front and insert the card into the port. c. The TX card enables communication between the main unit and the wireless receiver. *Do not insert any other card except the Cardtype dongle dedicated to the product. *If a different Cardtype dongle is used, the product may be damaged or the card may not be removed easily. *Do not insert the Cardtype dongle upside down or in the reverse direction. *Insert the Cardtype dongle when the TV is turned off. Inserting the card when it is turned on may cause a problem. SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA2E Wireless Cardtype Dongle User Manual page - 3 - 2. ID Learn a. Push ID_LEARN bottom to enter ID_LEARN mode when Cardtype dongle is at TX Card Connection Bottom b. ID Learn process would be finished within 15 secs. And Cardtype dongle would be back to audio_play mode automatically. * Do not turn off the TV or remove the Cardtype dongle from the TV during the ID Learn process SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA2E Wireless Cardtype Dongle User Manual page - 4 - 3. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA2E Wireless Cardtype Dongle User Manual page - 5 - 4. Revision History Date 2009/11/9 Revision 0.1 SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw Descriptions First release
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2009:11:09 09:40:20+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2009:11:09 09:54:26-05:00 Metadata Date : 2009:11:09 09:54:26-05:00 Format : application/pdf Creator : jamesmo Title : IA2E Wireless Card type User Manual_V0 Document ID : uuid:86a3f8d8-a8f6-4340-8b4f-c130ab70038e Instance ID : uuid:bbc28584-4172-47f2-b007-dd97774fec76 Page Count : 7 Author : jamesmoEXIF Metadata provided by EXIF.tools