Synergy Technologies SB1017HC Smart Bracelet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3894232
Application ID	1ofoGJhztUq76kUg0WHV6g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.57kB (544607 bits)
Date Submitted	2018-06-20 00:00:00
Date Available	2018-06-20 00:00:00
Creation Date	2018-06-12 19:36:11
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-06-12 19:37:20
Document Title	Microsoft Word - SB1017HC user manual 20180309.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	toby855

Version: 2018‐03‐09
User Manual
Model: SB1017HC
1. Quick start guide
1.1 Overview
1.
2.
3.
4.
Screen
Touch key
Heart rate
Charging POGO PIN
Please connect the Metal pins of the USB cable with the metal point on the back
of the bracelet until the charging icon appears on the screen
1.2 Install Orunning APP on phone
Download：Search for Orunning APP on Google Play or APPLE APP Store, or scan
the following QR code for the installation.
Android
iOS
1.3 Connect bracelet with mobile phone
1. Enable Bluetooth on your smart phone.
2. Open “Orunning” on your smart phone, set your profile on Settings.
3. Tap “Connect device” on Settings.
4. Select bracelet icon to connect
5. Follow the steps, search your device name and connect it.
1.4 Unbind bracelet with mobile phone
1. Open “Orunning” on your smart phone
2. Tap “Disconnect device” on Settings.
3. Forget your device on your smart phone Bluetooth settings
1.5 Operation Introduction
 You can raise hand /press the touch key to light the screen.
 Press the touch key to switch main menu interface.
 Long press the touch key to enter sub‐menus.
2. Functions
2. 1 Watch face
Long press the touch button for 3 seconds to switch the clock face and press the
touch button to select.
2.2 Pedometer
The bracelet will record your daily activity automatically.
Press touch key: switch between steps, calories and distance interface
After sync with Orunning APP, you can check your sport data on your smart phone.
2.3 Heart rate
Start testing by switching to the heart rate interface with a touch screen.
After sync with Orunning, you can check your heart rate data on your smart
phone.
2.4 Message
Press the touch screen key to switch to the message interface.
Long press the touch screen to enter the view.
Including incoming call, SMS, QQ and Wechat, Whatsapp, message notification
2.5 Multi‐Sport
Long press the touch screen button to enter into different sport mode (Walking,
Running, Hiking, Biking, Swimming). Please choose one mode, then go to sport,
the bracelet will record the data of the sport.
After exercise, you can press the touch screen to save this record in the bracelet.
PS：If sport time less than 1min, the data will not be saved.
2. 6 More
Long press the touch screen key to enter the functional interface.
There is a "about" and "shut down" interface.
2.6.1 About
Long press the touch button, you can check your bracelet's BT Mac address, device
name and firmware vision.
2.6.2 Power Off
Long press touch button on this interface to turn off the bracelet.
2.6.3 Find Phone
After the bracelet connected to Orunning, "Find phone" will appear on the
submenu. Long press the touch key, your android phone will ring. If you use
iphone, you must open Orunning APP to activate this function.
2.7 Sedentary Reminder
Please go to APP Orunning‐ Setting‐ Advanced setting‐Sedentary, set the Time
interval, start time, end time and Threshold, the bracelet will screen on and
vibrate to remind you when time is up if you do not meet the Threshold.
2.8 Alarm
You can set five alarms on Orunning. When alarm is on, its icon will be animated
and the bracelet will vibrate.
2.9 Gesture control
You can set the Gesture control style on Orunning.
 Raising hand: while raising your hand, the screen will be lighted up.

Turning wrist: while rotating your wrist, the screen will be lighted up.
2.10 Caring
Please observe the following to care for your device:
 Liquids: Don’t expose your product to extreme humidity, sweat, or other
liquids.
 Drying: Don’t try to dry your product using a microwave oven, conventional
oven, or dryer.
 Extreme heat or cold: Avoid temperatures below ‐10°C (14°F) or above 60°C
(140°F).
 For battery powered accessories, do not recharge your accessory in
temperatures below 0°C (32°F) or above 45°C (113°F).
 Dust and dirt: Don’t expose your product to dust, dirt, sand, food, or similar
materials.
 Cleaning: To clean your product, use only a dry soft cloth. Don’t use alcohol or
other cleaning solutions
 To help protect your product, always make sure that all connector and
compartment covers are closed and secure, and avoid carrying it with hard
objects such as keys or coins.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : toby855
Create Date                     : 2018:06:12 19:36:11+08:00
Modify Date                     : 2018:06:12 19:37:20+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Title                           : Microsoft Word - SB1017HC user manual 20180309.docx
Creator                         : toby855
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:06:12 19:37:20+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:b892dae9-0e21-4edf-83d6-ba16d0c15f77
Instance ID                     : uuid:beff8dff-3eaf-4409-92df-5c1f9410ad0f
Page Count                      : 8

EXIF Metadata provided by EXIF.tools