Sysgration APT-N9 Bluetooth Remote Control User Manual APT N8 User Guide

Sysgration Ltd. Bluetooth Remote Control APT N8 User Guide

Manual

Remote Controller User Guide Introduction Thank you for your purchase of the luetooth Media Remote for iPad. This remote uses Bluetooth technology which provides a seamless connection up to 32 feet (10m) away. This remote is iPad and Mac OS compatible. Its compact size is ideal for portability and travel. Contents • Bluetooth Media Remote • 1 x AAA Energizer® MAX® Batteries • User Guide System Requirements Hardware • iPod • iPhone • iPad • Mac Bluetooth enabled device Operating System • Mac OS X v10.4 or later Installing the Batteries 1 Remove the battery cover located on the bottom of the remote. 2 Insert the supplied battery, making sure that the positive (+) and negative (-) end matches the polarity indicators inside the battery compartment. Establishing the Connection 1. Turn on the remote by sliding the power button to the ON position. 2. Switch ON the Bluetooth function of your iPad. 3. Press the Connect button inside the battery compartment of your Bluetooth Media Remote to enable discovery mode. The low power indicator light will flash blue when the remote is in discovery mode. 4. Once the remote is listed as a found device in the bluetooth menu on the iPad, tap on the name and you will be prompted to enter a pass key as shown. “Bluetooth Media Remote” would
5. Use the number buttons in the battery compartment of your remote to enter the passkey shown on the pop up message, followed by the enter key. 6. Bluetooth Media Remote for iPad is now connected with your iPad and the blue light on the front of the remote will stop flashing. Keys and Functions
Buttons Definition (default) Button 1 2 3 4 5 Definition “0-9” buttons “ENTER” buttons ID buttons Volume- Prev-track buttons Button 6 7 8 9 10 Definition Next-track buttons Volume+ Play/Pause buttons s Home-Btn button Power button Bluetooth Connection: Mac 1. Go to the Bluetooth icon located on your desktop or in the system bar and click the icon to begin setup. Select “Turn Bluetooth On” to activate the
Bluetooth function on your Mac. 2. Scroll down the list and select “Set up Bluetooth Device...” 3. The Bluetooth Setup Assistant will begin. Please follow the on-screen instructions. 4. Select “Bluetooth Media Remote” and click continue to proceed with setup. Your remote will need to be in “discovery” mode to connect. 5. Press the Connect button on the back of your Bluetooth Media Remote to enable discovery mode. The low power indicator light will flash blue when the remote is in discovery mode. 6. Your computer will begin to search for the remote. Once the remote is found, it will show up in the list. Highlight “Bluetooth Media Remote” and press continue. 7. The remote will now begin pairing. Click continue to proceed. 8. Congratulations. Your Bluetooth Media Remote is setup and ready to use. You can choose to set up another device or click Quit to exit setup. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help.

Navigation menu