Sysgration AXM-208I WIRELESS OPTICAL MOUSE User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	589608
Application ID	szFzJMSxPaFgCmbBS0LxfA==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.75kB (321905 bits)
Date Submitted	2005-10-07 00:00:00
Date Available	2005-10-07 00:00:00
Creation Date	2005-09-27 13:53:20
Producing Software	Adobe Acrobat 6.02 Image Conversion Plug-in
Document Lastmod	2005-09-27 13:53:35
Document Title	USERS MANUAL
Document Creator	Adobe Acrobat 6.02

AXM-208l
User's Guide
@@
1.Connecting with Computer:
A. Pull the slide switch on the bottom of the mouse
outwards and the the receiver holder would spring open
B. Take out the receiver and close the receiver holder.
Tips: When the receiver holder
opens, the mouse led would light
up. It would only fade off when the "
receiver is put back into the holder
and the holder is closed.
C. Plug the receiver into PC's USB
Port. Under Win2000 or higher,
wait for OS to detect the RF device
Under Wings or lower, installation
of driver for the device is
necessary.
2. Inserting Batteries:
A. Press both sides of the rubberized mouse body
with your fingers and the battery
door would open.
Tips: Put your fingers as close to
the gap between the battery door
and the rubberized mouse body as
possible. It would be easier to open
to open the door.
B. Insert two AAA batteries into the
compartment and make sure they
are correct in polarity as the signs
shown on the compartment
MMM
C. Close the battery door.
l 0 change the wireless connec-
n channel:
When you wish to change the Wireless connection
between the mouse and the reciever
A Pressthe ID button on the bottom
ofthe mouse.The led on it starts
blinking
BPress the ID button on thetop
ofthe receiver if the led on it
starts blinking,lD Link is OK.
Warnlngl ID linking should be completed within 10
seconds or connection would befailed.
6.Power Saving Mo
A.Suspend Mode:
Keep mouse stationary for 10 minutes, mouse will
be automatically set to Suspend Mode Press left
button to wake up the mouse again.
B.Power OffMode:
When you wishto setthe mouse to power off
mode, press mouse lDfor3 seconds.
The Optical Led Will flash once
andthenfade out showing Mouse
poweris already offPressID
switch for waking up again.
Trouble Shooting:
A. When the mouse doesn't respond, check the battery
power. and make sure battery power is full.
B. Checkthe battery pole ifthe optical Led is still off
after inserting new batteries.
C. If battery power is full and led is normal, yet mouse
still won't work, do ID Linking once again to set up
connection again.
D. Ask for maintenance solution from your retailer and
engineer if upper trouble shooting would not work.
Personally taking apart mouse structure after
trouble happened is prohibited.
FCC NOTE
mmmwsucmmmwssc.wvm
mmecmmrrsmuweec.
mmmmwhmmdmmw
“Momma
Donmuk Eml- Fm Franco
Gummy Grue- Hungary inland
ihty LIM- uthumlu umboum
mit- Main Poland Portugal
stunni- U .K_ Spai- mud-n
mum
(Elmo FCC ID: HOXAXM-208I —@
This equipmenthas been tested and complywiththe limits
fora classBdigitaliievice,pursuantto PartlSoithe FCC
Rules These limits are designedto provide reasonable
protection. This equipment generates, uses and can
radiatedradio frequencyenergy and,ifnotinstalled and
usedin accordance withtheinstructionsmay cause
harmful intererence to radio communications, However,
thereis no guaranteethat interference willnotoccurina
particularinstallztionifthis equipmentdoes cause
harmful interlerenceto radio ortelevision reception.which
can be determined byturning the equipment off and on,the
user is encouragedtotryto correctthe interference by one
ormore orthefollowing measures:
' Reorientorrelocatethe receiving antenna.
" Increasethe separation between the equipment and
receiver.
' Connect the equipment into an outlet on a circuit
differentfromthatto whichthe receiver is connected.
' Consultthe dealeror an experiencedradio/TVtechnician
for help.
Changes ormodifications notexpressly approvedtythe
partyresponsible for compliance could voidthe user’s
authorityto operatethe equipment. The antenna(s)
usedforlhistransmittermustnotbe co»locatedoroperating
in conjunction with any other antenna or transmitter

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:adc39073-7ffd-44cc-9942-d8ea7d19ebf5
Modify Date                     : 2005:09:27 13:53:35-04:00
Create Date                     : 2005:09:27 13:53:20-04:00
Metadata Date                   : 2005:09:27 13:53:35-04:00
Document ID                     : uuid:5ddb8c36-977b-428d-859f-bd56cf3ab8f1
Format                          : application/pdf
Creator                         : Adobe Acrobat 6.02
Producer                        : Adobe Acrobat 6.02 Image Conversion Plug-in

EXIF Metadata provided by EXIF.tools