Sysgration AXM-607G 2.4G Wireless Mouse User Manual 2 4 f7 mouse MANUAL

Sysgration Ltd. 2.4G Wireless Mouse 2 4 f7 mouse MANUAL

user manual

   2.4G    wireless Mouse Users’ guide     Installation 1.    Plug the receiver into a USB port of your computer. 2.    Insert battery into mouse.   3.   Press the ID button on the top of the receiver,When    the led is on ,it starts blinking . 4.    Press the ID button on the bottom of the mouse .   If blinking is successful,the led on the receiver gliters . 5.    Click the mouse key to get connected with the receiver.   Trouble Shooting 1.    Check  receiver  connection;  try  to  inserting  receiver  to  another  USB  port on your computer. 2.    No Connection between the mouse    and the Receiver.    Re-insert the Receiver.   take out the battery from the    mouse    and reinstall it.     Note: FCC statement: This equipment has been tested and found to comply with the limits for a Class B   digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to   provide  reasonable  protection  against  harmful  interference  in  a  residential installation. This equipment generates, uses and can radiate radio frequency energy and if not   installed and used in accordance with the instructions, may cause harmful   interference to radio communications. However, there is no guarantee that   interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by   turning the equipment off and on. The user is encouraged to try to correct    the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the   receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved   by the party responsible for compliance could void the user’s authority to operate this   equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC rules. Operation is subject to the following   two conditions: (1) This device may not cause harmful interference, and (2)  This  device  must  accept  any  interference  received,  including interference that    may cause undesired operation.   Caution! The manufacturer is not responsible for any radio or TV interference caused by   unauthorized  modifications  to  this  equipment.  Such  modifications  could  void  the userauthority to operate the equipment.

Navigation menu