Sysgration AXM-700A Sysgration, Easy Line User Manual AXM 700A Manual

Download:
Mirror Download [FCC.gov]
Document ID	1041304
Application ID	9L7OnQdZOveinnS4Zc/j+g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	85.49kB (1068575 bits)
Date Submitted	2008-12-09 00:00:00
Date Available	2008-12-09 00:00:00
Creation Date	2008-11-20 18:03:34
Producing Software	AFPL Ghostscript 8.14
Document Lastmod	2008-12-03 17:11:09
Document Title	AXM-700A Manual
Document Creator	PDFCreator Version 0.8.0
Document Author:	jsyeh

Wireless Optical Mouse AXM-700A User Manual
AXM-700A User Manual
1. Connecting with Computer:
This Wireless Optical mouse supports you
Plug and Play function.
Plug the receiver into USB port of the PC.
Under Win2000 or higher ,
OS will detect the RF device
automatically.
Under Win98 or lower,
please insert Win98 CD or
download Win98 driver from
Microsoft web-site and
install the driver first.
Insert the batteries into the mouse and
move it for a while, then it starts working .
2. Inserting Batteries:
A. Find a button at the
middle top of the mouse
and press with your left
finger.
B. Drag the battery cover backwards with
your right thumb and finger and open it.
6. Trouble shooting:
A. When mouse doesn’t respond to any
movement, check the battery power status. It
would not work when voltage of each
battery is lower than 1.0Vdc.
B. Check the battery pole for incorrect
orientation, if the optical Led is still
unlighted after inserting batteries.
C. When failure of channel connection is
suspected, try procedure of change channel
as mention above.
D. Ask for maintenance solution from
your retailer and engineer when upper
troubleshooting methods fail. Personally
taking apart of this unit is prohibited.
C. Insert 2 AAA
batteries into the
compartment with correct
orientation.
D.
Slide the battery
cover to the front of the
compartment till it is
locked.
3. Change Connection:
When your environment happens to be
severely interfered by neighboring
wireless devices, you may
change connection channel.
A. Press the Connect button
on the receiver dongle and
the led on it starts blinking
B. Press the Connect
button on the bottom of the
mouse. When the Led
blinking turns faster,
the new connection is OK.
This device complies with part 15 of the
FCC Rules. Operation is subject to the following
two conditions: (1) This device may
not cause harmful interference, and (2) this
device must accept any interference received,
including interference that may
cause undesired operation.
Note: Pressing of the two Connect buttons
should be within 10 seconds to get
connection successful.
4. Power Saving:
A. For battery saving purpose, when the
mouse is kept stationary for 8 minutes, it
will automatically enter Sleeping Mode.
B. Click any of the buttons once and the
mouse will wakeup immediately.
5 Power Off and Power Off mode:
A. When there is occasion that you will
not use the mouse for a period of time, be
sure to slide the power switch to the OFF
position.
B. Or if you press the connect button on
the bottom of the mouse for 3 seconds, the
optical Led will flash once and the mouse
will get into power off mode.
B. To resume mouse’s power, press the
channel button once again.
FCC Note :
This equipment has been tested and comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection. This equipment
generates, uses and can radiated radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation if
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
The antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2008:11:20 18:03:34Z
Creator Tool                    : PDFCreator Version 0.8.0
Modify Date                     : 2008:12:03 17:11:09+08:00
Metadata Date                   : 2008:12:03 17:11:09+08:00
Format                          : application/pdf
Description                     : 
Creator                         : jsyeh
Title                           : AXM-700A Manual
Keywords                        : 
Producer                        : AFPL Ghostscript 8.14
Document ID                     : uuid:269be50c-4237-435c-be56-7608bf1c08c8
Instance ID                     : uuid:37c322fb-2b50-4c61-8b85-c21ba786aef2
Has XFA                         : No
Page Count                      : 1
Subject                         : 
Author                          : jsyeh

EXIF Metadata provided by EXIF.tools