Sysgration AXM-939M Wireless 2.4GHz Optical Mouse User Manual HQXAXM 939M

Sysgration Ltd. Wireless 2.4GHz Optical Mouse HQXAXM 939M

Manual

2.4G Wireless Mouse Users’ Guide Installation 1  . Wireless Mouse with cursor   1 batterie AA   Guida per l’utente   1X guida alla garanzia   Installation 2(setting up your wireless mouse) 1.  lnstalling the battery,if the mouse is on,slide the on/off switch located on the side of mouse to the”off position. 2.  lnsert the supplied battery,making sure the positive(+)and negative(-)ends of the battery match the polarity indicators the battery compartment 3.  slide the battery cover back into position until it clicks into place 4.  turn on the presenter   Note: FCC statement: This equipment has been tested and found to comply with the limits for a Class B   digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to   provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not   installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that   interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by   turning the equipment off and on. The user is encouraged to try to correct    the interference by one of the following measures: Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the   receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved   by the party responsible for compliance could void the user’s authority to operate this   equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC rules. Operation is subject to the following   two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that    may cause undesired operation.   Caution! The manufacturer is not responsible for any radio or TV interference caused by   unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Navigation menu