Sysgration AXM-Q0 Wireless 2.4GHz Optical Mouse User Manual

Sysgration Ltd. Wireless 2.4GHz Optical Mouse Users Manual

Manual

2.4G Wireless Mouse Users’ Guide Installation 1.    Plug the receiver into a USB port on your computer. 2.    Insert battery into the mouse.   3.   This mouse provides factory default ID and so the link will be set up after a while. 4.    Click the mouse key and her response will be read on the monitor.    Trouble Shooting 1.  No connection between the mouse and the receiver.   Re-insert the receiver. Try to insert receiver to another USB port on your computer. 2.    No any response on the mouse. Take out the battery from the mouse and reinstall it with correct orientation. Try a new battery if necessary.    Note: FCC statement: This equipment has been tested and found to comply with the limits for a Class B   digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to   provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not   installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that   interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by   turning the equipment off and on. The user is encouraged to try to correct    the interference by one of the following measures: Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the   receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved   by the party responsible for compliance could void the user’s authority to operate this   equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following   two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that    may cause undesired operation.   Caution! The manufacturer is not responsible for any radio or TV interference caused by   unauthorized  modifications  to  this  equipment.  Such  modifications  could  void  the user authority to operate the equipment.  Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu