Sysgration PC97010-38 User Manual 8
Sysgration Ltd. 8
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 80757 |
| Application ID | aK5SlwAMSulBBbHxd5ZmVA== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 5.04kB (63015 bits) |
| Date Submitted | 2000-01-12 00:00:00 |
| Date Available | 1998-09-30 00:00:00 |
| Creation Date | 2001-04-30 15:14:13 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-04-30 15:14:15 |
| Document Title | 8 |
** USERfS MANUAL xx FCC ID : HQXPC97010-38 Federal Communications Commission (FCC) Statement This equip-ent has been tested and found to conply with the li-its for a Class B digital device, pursuant to part 15 of the FCC Rules. These lilits are designed to provide reasonable protection against harnful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. any cause harlful interference to radio collunicfltions. However. there is no guarantee that interference will not occur in a particular installation. If this equip-ent does cause harlful interference to radio or television reception, which can be detereined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or lore of the following measures! -— Reorient or relocate the receiving antenna. -- Increase the separation between the equiplent and receiver. —- Connect the eqhipuent into an outlet on a circuit different fro: that to which the receiver is connected. -~ Consult the dealer or an experienced radio/TV technician for help. Warning: A shielded-type power cord is required in order to meet FCC emission lilits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect 1/0 devices to this equip-ent. You are cautioned that changes or lodifications not expressly approved by the party responsible for conpliance could void your authority to operate the equiplent. xawmmannumxxmxawmcu “ Getting started * **$xx******t#a********x To install the mouse, you need the following items ready for use. Computer -------- Pentium compatible and higher Disk ------------ A floppy disk or including a fixed disk Windows --------- Windows 95 (most OEM-B,zill with USRE X) and Windows98 Memory ---------- 8M RAM or above USB port ----- For USE mouse use Monitor card »—- IBM Color Graphics Adapter,lBM Enhanced Graphics Adapter With Enhanced Color Monitor or other compatibles t*>¢x*x*****x**>fi******w* * Installation * **********X****#******* Installing a USB mouse driver under Windows 95 a) Start Windows 95 b) Connect USB mouse into USB port on PC 5) Add New Hardware Wizard dialog is appeared on ilie sereen.Please press the ”ENTER“key on keyboard or click "NEXT” button on screen if another mouse has already installed. d) Please put the USB mouse driver diskette into floppy driver A and press the “ENTER" or click "NEXT" button e) "USB Mouse" message is appeared on the dinlogl’ressing the "ENTER" or click "NEXT" button to complete the installation. ***x*txxt*********** * Maintaenance * *x***m*x«*********** The mouse’s ball‘ the rollers against which the ball presses, and the mouse housing will all become dirty With time. These parts should be cleaned regularly with a lintfree cloth l Turn offthe computer. 2 Turn the mouse upsidedown and remove the ball cover. 3 Remove the ball itself, and wipe offthe ball, the rollers, and the housing with a cloth that has been wetted with water or a mild soap solution You may wish to use a swab instead ot'a cloth to clean the rollers 4, Replace the ball and the cover. ********x**#****a***** * Trouble shooting * *****************x**** Ifthe screen cursor doesn‘t move in response to the mouse. do the followmg * Check the communications interface. Do you have the mouse hooked to the right p0rt(USB port)” Is the connection firm? You may want to tighten the connector. * Verify that you have loaded the mouse driver. Load the mouse driver by changing to the MOUSE directory * Verify that the mouse is operating in the proper mode, There are application programs which require a particular operating mmlc * Check the settings in a particular graphical user intuvtht‘c such as Windows to verify that they will allow the mouse to be used
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:04:30 15:14:13 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:04:30 15:14:15-04:00 Page Count : 4EXIF Metadata provided by EXIF.tools