Sysgration TA84 Voice Dongle User Manual TA84 user Manuel en

Sysgration Ltd. Voice Dongle TA84 user Manuel en

Users Manual

Download: Sysgration TA84 Voice Dongle User Manual TA84 user Manuel en
Mirror Download [FCC.gov]Sysgration TA84 Voice Dongle User Manual TA84 user Manuel en
Document ID2765031
Application ID4vSrHdkXDM8jHwLUquMKww==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.29kB (266067 bits)
Date Submitted2015-09-28 00:00:00
Date Available2015-09-28 00:00:00
Creation Date2015-09-23 18:05:38
Producing SoftwareGPL Ghostscript 9.04
Document Lastmod2015-09-25 17:21:52
Document TitleTA84 user Manuel_en
Document CreatorPDFCreator Version 1.2.3
Document Author: vickychang

Voice Dongle
User Manual
TA84
Table of Contents
1. VOICE DONGLE SPECIFICATION ......................................................................................... 3
2. INSTALLATION STEPS .............................................................................................................. 3
3. VOICE DONGLE SETTING ....................................................................................................... 4
4. WARRANTY POLICY ................................................................................................................. 5
1. Voice Dongle Specification
Operating Voltage
Operating Humidity
Operating Current
Storage Temperature
Operating Temperature
Sound Pressure (min.)
Operating Frequency
Transmission Power
Weight
Operating Voltage
95 % MAX
<900 mA at DC 5V
-40℃ to 85 ℃
-20℃ to 85 ℃
80dB@30cm
2.4GHz
4 dBm MAX
10 ± 1 g
5V
2. Installation Steps
3. Voice Dongle Setting
iOS version
Pic 1
Android version
Pic 2
Pic 1
Pic 2
Pic 3
Pic 4
Pic 3
Pic 4
Voice Dongle Setting:
1. Press the red voice dongle button for 1.5 seconds. When you hear “beep,” you will go into the
Bluetooth pairing mode (LED : flicker of Red and Blue light ). (Pic 2)
2. Enter menu ->click
>click ”Dongle” function ->click
>click “TPMS_Dongle_sn” (random serial number),
“TPMS_Dongle_sn Connected” will be shown in blue color. (Pic 3)
3. iOS version: The APP will automatically download the
the settings when you hear “Setup
completed.” You can start using after “Voice dongle Setting OK” is displayed.
Android version: Please click write. The APP will automatically download the settings when
you hear “Setup completed.” When “Dongle Setting OK” is displayed, you can start using.
Mute/ Un-Mute:
Mute: Press the red button to mute. Press the red button again or wait 10 minutes for
the mute function to cancel automatically.
4. Warranty Policy
Thank you for buying this product and giving us support. From the date of purchase, we
provide a one-year warranty for the product, protecting the client’s interest by providing product
quality assurance. During the warranty period, under normal operation and in the event of a faulty
product, the company is willing to repair the faulty product or have it replaced, enabling you to
get the guarantee and demonstrating the company's responsible attitude toward products. But the
product warranty must meet the following conditions:
1. Defective products need to be provided to local dealer to confirm purchase date and cause of
defect.
2. Products must be operated correctly, as indicated in the user manual.
3. Product has not been disassembled by yourself.
4. The main cause of product failure is due to manufacture issues.
Disclaimer:
This product is only to be used as precautionary warning and provides to user as a convenient
secondary safety equipment. Please follow the standard installation procedures or ask a qualified
tire shop to install the product. If the tire has been damaged or traffic accident resulting from
improper driving behavior occurs, the company will not be responsible for any civil or criminal
liabilities.
Other relevant latest information of SYSGRATION TPMS is available at our website
(http://www.sysgration.com/ ) and our Facebook Page (http://www.facebook.com/sysgration) for latest
information.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate this equipment. (Example use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the
radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm
from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2015:09:23 18:05:38+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Modify Date                     : 2015:09:25 17:21:52+08:00
Metadata Date                   : 2015:09:25 17:21:52+08:00
Format                          : application/pdf
Description                     : 
Creator                         : vickychang
Title                           : TA84 user Manuel_en
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:11ee5512-cd0c-43be-846d-4b1cff743879
Instance ID                     : uuid:d580b7df-c10e-44b6-83f2-c35ac34a63db
Subject                         : 
Author                          : vickychang
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HQXTA84

Navigation menu