Sysgration WVOM713 Digital Wireless 7" Monitor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1700799
Application ID	U5C/WPt69NVBOMq+FWcejw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	393.27kB (4915930 bits)
Date Submitted	2012-05-18 00:00:00
Date Available	2012-05-18 00:00:00
Creation Date	2012-05-18 14:12:06
Producing Software	Corel PDF Engine Version 16.0.0.707
Document Lastmod	2012-05-18 14:12:06
Document Title	Untitled-1
Document Creator	CorelDRAW X6
Document Author:	USER

®
Observation Systems
WVOS713
7” DigitaIWireIess
Observation System
”WW“ WiSight'technobgy
WVOS713 Features:
High Performance Automotrve Grade 7" Color LCD Panel
3 Camera Input“ Wire\ess Inpul CameraS)
PAL/NTSC Compauble
DCAulc Source Swilchmg Triggers (Turn signal compatible)
BackMContrm Buttons
Built-mAudio Speaker
Manual/auto Day/mght Dismay Brightness Modes
Programmable Source Name OSD
Camera-Monitor Warnlngs!
1r Camera/monilor system aids in the use or, butdoss r|0| repleee
vehicle side/rear»view mirrors.
2. Objects in camera/monilorview are crusermen they appear.
When backing up, proceed cautiously and be prepared to stop.
WVOS71 3
Important! - Please Read This Manual Before Installing!
Congratulallons on your purchase of a Voyager wvosrl 3 LCD Observation Monitor
with wisight wtechnology with proper installation and use, yourwvcs7l 3 is
designed to provide you With years ortroubie—rree operate the unit Please read this
manual thoroughly beginning
All Voyager Observatlon products are strictly intended to be installed as supplement aid
to standard rear-View mirror systems that may already e>tist in your vehicle. Voyager
Observation products are not intended fur use as substitutes tor-view mirror devices,
Orrorany other standard motorvehicle equipment requlred be installed on vehicles
by law.
White Voyager observation products contribute to improwng the vehicle operator‘s tield
cryiew, these products are no substitute tor proper deiensive driving techniques and
Observance oitramc laws and motor vehicle salety regulations
Warnings'
RED PDWER WIRE MUST BE CONNECYED To AccEsson To AVOID CURRENT
DRAWIN THE KEY OFF PostTloN.
Installation Location
it is unlawful in mostlurlsdlctlons for a person to drive a motor vehicle equipped With a
television viewer or screen located at any pointiorward oithe back oithe drlver‘s seat or
in any location that is visible directly or indirectly to the driver while operating
the vehicle, The wvosrtaproduct is designed to be used primarily as a rear observation
devlce ln conjunctlon wlth closed clrcult camera in any Installatlons where the WVOS'HS
ls used In dlsplay televlslfln broadcasts or recorded vldeo, playback, lnstallatlorl lflcallnn
must adhere to local laws and regulations.
Tampering
To prevent electrical shock Do nororeu rne nomroa case There are potentially
harmiul voltages inside the monitor There are no user serviceable parts inside
If evldence nf tamperlng ls detected‘ the Warranty wlll be consldered vuld
Moisture
Whlle It wlll wlthsland short perlods of exposure to mnlsture‘ thls product does contaln
sensitive electronic components and exposure to moisture should be limited by the
user/installer This product is not designed tor where constant exposure to moisture or
immersion can be encountered. This unit should NEVER be cleaned With a power washer
or used where direct power washer spray may be encountered
Depth of view
uaJEcTs vieweo lN MomToRARE ctosee man ruevaeeeae
WVOS71 3
PACKING CONTENTS
SUN SHIELD
QTY. 1
LCD MONITOR
an 1
CABLE QTY. 1 “
Q Machine Screw
MAXBmm
QTY.4
{ibumwmmmgf 17
4" WIRE TIE
QTY. 1
wchswa
QTY. 1
WVOS71 3
CONTROLS AND OPERATION
12345678
1. POWER ONIOFF rPress cnce turns umt on
press again (urns unit a"
-When power apphed and uml is on only the red power button is backm.
-When umt Is Iumed an, a” mmuns are backhi
2. MENU
‘ -E8DH one W655 ‘ess than 1 SSDOHG enters brightness, COHVESL CD|0V
MENU or UM adjust mode in (”ms (see Fig. 1)
\ mme out ovosn menu S approx. 5 seconds 7mm Iast key pressed
smsumsss
% -- Iv I A mess TO ADJUST ameumgss
smumsss
nunnnnnnnnnnnnn
commsr
EB PRESS TO ADJUST CONTRAST
CONTRAST
nunnnnnnnnnnnnn
WVOS713
COLOR
m- v A PRESSTOADJUSTCOLOR
cow»:
nunnnnnnnnnnnnn
T‘NT
w... v A] PRESSTOADJUSTTINT
mm
unnnnnnnnnnnnnn
Flg 1 Erlgmness‘ cuntrast, cmur and um cuntrm
\ . Press menu butlon over 2 Seconds enlers Selup menu
new (See Pg 2)
Press agam before (me nut einS menu mode
"SETUP MENU—r PRESS To NAVIGATE uP/DOWN
1.NORMAL/MIRRDR
2.TRIGGERDELAY
lCAMERANAME
¢ SCALE MODE '
SADVANCED MENU PRESS TO SET uP EACH MENu
SELECT
1 NORMAL / MORROR
PRESS To Ewa SETUP MENU
7 PRESS TO NAVWGATE uP/DOWN
THROuGH MENU oPnoNS
womw m»:
cm worm/u Mumom
*. cw mmmwmm
cm; [mam MWRROR]
PRESS TO SELECT oPTwoN SEmNG
PRESS TO GO EACKTO
SETUP MENU
WVOS71 3
SELECT
2 TRLGGER DELAY
mm“ mwm THROUGH MENU OPTIONS
”mm L, :
07034
”R‘CCEM‘", K‘ PRESS To NAVTGATE uP/DOWN
i: macaw oSEc 0205 H... .
‘dcfm, PRESS To TOGGLE THROUGH
Q NUMBER SET
PRESS To GO BACK ToSETuP MENU
SELECT
SCAMERA NAME
JCAMERANAME u- v . PRESS TO NAVIGATE LAP/DOWN
i, cm THROUGH MENU OPTIONS
cm; [774
am: I T a
”DZ“, PRESS To SCROLL THROuGH
ALPHA—NUMBERWC CHARACTER SET
PRESS To SELEcT men UGHTED
CHARACTERAND MOVE To NExT
LETTER
PRESS To Go BACK To SETUP MENU
SELECT
A SCALE MODE
H... A PRESS To NAVTGATE UP/DOWN
THROUGH MENU OPTIONS
,f~
_vmumi+‘ PRESS TO SELECT oPTToN SETTTNG
L a ,
PRESS TO GO BACK To SETUP MENU
WVOS71 3
SELECT
SCALE / z/ 3 M
an 39
sh 50
SELECT
5. ADVANCED MENU
sAnvANchMEnu
”MSW/w Mm Raw.”
1 “mm [up 170le
3 wwwcomm
4 AuToPowER [ON am
5 cu SELGN [w om
SELECT
DAY’N G-F [DAV h G-{Y Aura;
mm G-(LEVEL [New
mm G raR GN' mm
T..- v A PRESS To SET uP EACH SCALE
J—
c-..
' MW“ PRESSTo SCROLLTHROUGH
' NuMeER To To 9)
PRESS TO MOVE To NExT NUMEER SET
PRESS To Go BACK To SETuP MENU
* PRESSTowAVTcATEuP/DOWN
‘-' v C 4 mouwwopws
4‘“ PRESS To SELECY oPTTcN SETTING
mu PRESS To Go BACKTO SETUP MENu
DAV! NIGHT CONTROL
~ PRESS To NAWGATE “mow
T..- v A‘
THROUGH MENU omws
PRESS To TossLE THROUGH AND
SET uP EACH LEVEL
PRESS To (30 BACK To ADVANCED
MENU
WVOS713
3. SELECT
sum
L4
4. UPIDOWN
E23
5. Day I Night
k it}
6, Volume +I-
VOLUME-l-
Primary Function Input Source Select
Pressing "SELECT" button sequences source input modes irom
cm to en: to one
Source D is indicated by OSD in top left corner
Secondam Function Menu Option Selection
-wniie in Menu mode, the "SELECT" button is used to select the
hlgnlighted function or option selling
Primag Function Brightness Contrast Color and Tint Control
Pressing "UP" button increases brightness, contrast. color
or tint level
-Pressing "DN" button decreases brightness, contrast, color
and lint level
Secondag Function Menu Navigation
sWniIe in Menu modes. the " up" and "on" buttons are used to move
cursor upward or downward
Primary Function DAYINIGHT Mode Setting
Pressing “DAY/NIGHT" button sequences day/night backlignt
compensation through “DAY“. "NiGHT" and “AUTO" modes
Primary Function Speaker Volume Control
-Pressing "-" button decreases speaker volume
-Pressing + button increases speaker volume.
Secondary Function Menu Option Settinq Selection
, While in certain Menu modes (i,e. Source Naming), the "-" and
"+" buttons adiust settings or naVigate through the available
menu settings
WVOS71 3
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGlN INSTALLATION:
Before drilllng be sure lhat no cable or wlring is on the other Slde Clamp all wires securely
to reduce the passibllity of them belng damaged durlng lnstallahon and use
Keep all cahles away from hot or movlng parts, and electncally noisy components.
Wiring Defi ns:
l Power connecllon Pinl POWER lN DC (9V~ 30V) -Red
Pin2 GROUND-Black
Pin3 CAMERA lTRlGGER-Blue
Fir|4 CAMERA ZTRlGGER-Bmwn
PINS CAMERA 3TRlGGERrGreen
PINE AUDlO/MUTE(AUDlO ON/OFFLWhIIe
Pln7 DAY/NIGHTTRIGGERrGray
l Camera1lnpuI: A-Pln Connecllon Iorcamera orcamera extenslon cable
I CameraZlnpul A—Pln Connectlon Iorcamera orcamera extenslon cable
- LCD panel: lS-Pin Large DlN cable conneclion to monlmr
General:
1. Choose lhe monitor, and camera locallons.
2 InsIalI all requlred cables in vehlcle Ail/4" (19mm) hole should be drllled for
passlng camera cables through vehicle walls‘ barriers etc
Install split grommets where applicable. lfaddltlonal cable prolecllon ls
requlred lnstall convoluted Iublng overihe cable,
3. Aftercable/wrnng has been routed and components ln place. lemperanly make all
system connections and perlorm a system function check llsystern does not
operate properly. seelhelmubleshooling sectlon.
4 Make sure all cables are routed away from hot or moving parts‘ and away Irom
sharp edges. Secure cables wllh wlre Iles.
WVOS71 3
TYPICAL SYSTEM CONNECTION
WVOS713
MONITOR
WVCMS1UB
13VP|N LARGED‘N
LQCK‘NG ClNNECTOR
(MALE)
CAMERAxZ R
47FIN FEMALE
TSVPUV LARGE D‘N
CAMERA CONNECTOR LOCKING CONNECTOR
(FEMALE)
(I [5 3KFUSE
cm cu GND(BLACK)ACC(RED)
rcwEn/rmGGEmeEFummnns
m , mks mLon uncmrflou
, ms "Wm WM)
A “m vmmslz (cm
5 mm mm 1 muy
. wmvfi magnum“ any
1 Guv mm mmm
WVOS713
PRODUCT SPECIFICATIONS
LCD PANEL SPECIFICATIONS
Site/Type
7“(Anang)TFT LCD
Brightness
500 cd/m‘
Contrast Ratio
300
ViewAngIes
To p
(@CR210)
Bottom
HONIQHIEI
RISE.15mS
Response Time
FaII‘ZO ms
Back Light Type
LED
Back Lighl Life
sz Humidity : 85"/o
20,000 Hours(m|n)
Operation Temperature Range: 20°C ~ +ss°c
Storage Temperature Range: ,35nc - +55°c
Operation Voltage Range :DC QV ~ 30V
CurrentDraw(typica|) :600mA @12vnc
Signal system :NTSC or PAL(Aqu detection)
Video Aspecl Ratio: 16 9
InputLevel: 1Vp»p 75m
Audio inputLevei: 150 mV(Max)
FroouotWeight: 1.
43 lbs / 650g
FroductDimensions: MonitorOnIyDimenslons
775WX525HX125Dmches
10
WVOS713
PAIRING PROCESS
ltyeur monitor is not receiwng a signal from the camera; the two may not be paired correctly.
‘l. Camera and monitor must be connected to 12 Volt DC power supply
2. Remove ”palr" button cover lrom the side or the camera (using a coin or
flat head screwdriver) Flgure A
3 Press and hold the "pair” outton on the back or the monitor tor 3 seconds
and release (Monitor will display “Please press rx pairing button")
4 Press and hold the “pair" button on the side orthe camera for 3 seconds
and release (you have 60 seconds to press this button.)
it done correctly, monitorWill display ”Palrlng successful". lf pairing is not
successlul the monitor will display “Palrlng failed” llyou receive this
message repeat steps 2 , 4.
TROUBLE SHOOTING
Monitor wlII nol turn on. — Check power cord connecllon at monitor
and 12VDC sockei
— Check fuse in clgaretle socket adapler.
Monitor displays “No signal". , Check tzvoc power at camera.
- Make sure antenna is tight and pointed
correctly.
, Make Sure monlicr ls set to AV1.
, Try manually pairing the system. See
Pairing Process for instructions
Intermittent reception. - Make sure antenna is tight and installed
vertically
Notice- The changes or modifications not expressly approved lay the party
responsible tor compliance could void the user's authority to operate
the equipment
IMPORTANT NOTE To comply with the FCC RF exposure compliance requlremenls,
the antennats)usedtortnistransmiltermustoeinstalled to
provide a separation distance olat leastzn cmlrom all persons and
must not be cu—lecaled or operating in ceniunclion with any other
antenna ortransmitter No changeto the antenna orthedeVice is
permitted.Anychange to the antenna orthe device could resultin the
device exceeding the RF exposure requirements and void user‘s
authority to operate the device
11
'0
electmIs
Furfimhuluhmmlxuvwflall
1—577 ins—nus
Munmwmqw

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 13
Create Date                     : 2012:05:18 14:12:06+08:00
Modify Date                     : 2012:05:18 14:12:06+08:00
Producer                        : Corel PDF Engine Version 16.0.0.707
Author                          : USER
Creator                         : CorelDRAW X6
Title                           : Untitled-1
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Trapped                         : False

EXIF Metadata provided by EXIF.tools