System Level Solutions PI0NL02000100 Nebulae Module V2 User Manual
System Level Solutions (India) Pvt. Ltd. Nebulae Module V2
15_PI0NL02000100 UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3939898 |
| Application ID | 0vb8ybpRCC4WljAyBnBSNA== |
| Document Description | 15_PI0NL02000100 UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 62.61kB (782566 bits) |
| Date Submitted | 2018-07-26 00:00:00 |
| Date Available | 2018-07-26 00:00:00 |
| Creation Date | 2018-06-15 12:58:40 |
| Producing Software | Acrobat Elements 10.0.0 (Windows) |
| Document Lastmod | 2018-06-15 13:06:07 |
| Document Title | untitled |
| Document Creator | FrameMaker 10.0.2 |
Nebulae Module V2 Datasheet System Level Solutions, Inc. (USA) 14100 Murphy Avenue San Martin, CA 95046 (408) 852 - 0067 http://www.slscorp.com Module Version: 1C Document Version: 1.4 Document Date: June 2018 Copyright ©2018, System Level Solutions, Inc. (SLS) All rights reserved. SLS, an Embedded systems company, the stylized SLS logo, specific device designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of SLS in India and other countries. All other products or service names are the property of their respective holders. SLS products are protected under numerous U.S. and foreign patents and pending applications, mask working rights, and copyrights. SLS reserves the right to make changes to any products and services at any time without notice. SLS assumes no responsibility or liability arising out of the application or use of any information, products, or service described herein except as expressly agreed to in writing by SLS. SLS customers are advised to obtain the latest version of specifications before relying on any published information and before orders for products or services. ds_nebulaemodule_v2_1.4 System Level Solutions June 2018 ii Nebulae Module V2 Datasheet About this Manual Revision History Table below shows the revision history of Nebulae Module V2’s datasheet. Version 1.4 How to Find Information • • • • How to Contact SLS Date June 2018 Description • • 1.3 April 2018 • Update Figure 1.1 and Table 1.1 in Chapter 1 1.2 November 2017 • • Updated Table 1.1 in Chapter 1 October 2017 Update Figure 1.1 and 1.2 in Chapter 1 1.0 March 2017 First publication The Adobe Acrobat Find feature allows you to search the contents of a PDF file. Use Ctrl + F to open the Find dialog box. Use Shift + Ctrl + N to open to the Go To Page dialog box. Bookmarks serve as an additional table of contents. Thumbnail icons, which provide miniature preview of each page, provides a link to the pages. Numerous links shown in Navy Blue color allow you to jump to related information. For the most up-to-date information about SLS products, go to the SLS worldwide website at http://www.slscorp.com. For additional information about SLS products, consult the source shown below Product literature services, SLS literature services, Non-technical customer services, Technical support. Nebulae Module V2 Datasheet Updated Table 2.1 in Chapter 2 1.1 Information Type iii Update Table 1.1 in Chapter 1 Added Annexure A: FCC Statement and Annexure B: Module Statement E-mail support@slscorp.com System Level Solutions June 2018 Typographic Conventions This datasheet uses the typographic conventions as shown below: Visual Cue Meaning Bold Type with Initial Capital letters All headings and Sub headings Titles in a document are displayed in bold type with initial capital letters; Example: General Description, Features. Bold Type with Italic Letters All Definitions, Figure and Table Headings are displayed in Italics. Examples: Figure 1-1. Nebulae Module V2, Table 1-1. Nebulae Module V2 Specifications. 1., 2. Numbered steps are used in a list of items, when the sequence of items is important. such as steps listed in procedure. • Bullets are used in a list of items when the sequence of items is not important. The hand points to special information that requires special attention The caution indicates required information that needs special consideration and understanding and should be read prior to starting or continuing with the procedure or process. The warning indicates information that should be read prior to starting or continuing the procedure or processes. The feet direct you to more information on a particular topic. System Level Solutions June 2018 iv Nebulae Module V2 Datasheet Contents About this Manual.............................................................................................................. iii Revision History ......................................................................................................................................iii How to Find Information .........................................................................................................................iii How to Contact SLS ................................................................................................................................iii Typographic Conventions ........................................................................................................................iv 1. Overview .................................................................................................................................... 1 General Description ..................................................................................................................................1 Benefits .....................................................................................................................................................1 Specifications ............................................................................................................................................3 2. Pin-Out Information .................................................................................................................. 6 3. Package Information................................................................................................................. 8 Annexure A: FCC Statement .......................................................................................................... 9 Annexure B: Module Statement .................................................................................................. 11 Nebulae Module V2 Datasheet System Level Solutions June 2018 1. Overview General Description The Nebulae Module V2 provides a means for any electronic device to implement low cost wireless connectivity. This module inter operates with either Zigbee or 6LoWPAN devices depending on the programmed stack. Nebulae Module V2 is ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. The Nebulae Module V2, built around the NXP JN5169 SoC (system on a chip) radio IC, integrates an 802.15.4 radio along with a powerful programmable 32-bit RISC CPU. The architecture isolates the wireless software without sacrificing RF performance or security for applications. Quickly and efficiently create customized applications with the Nebulae Module V2. Benefits System Level Solutions June 2018 The main benefits of the Nebulae Module V2 are: Customizable Zigbee and 6LoWPAN applications with a programmable CPU A rich set of hardware peripherals such as GPIO, UART, SPI, I2C, ADC, and PWM A great choice for battery oriented applications with various sleep modes • Sleep with IO wake up • RAM Retention • Low Power mode • Deep Sleep mode Provides an OTA (Over the Air) Firmware update mechanism Supports Mesh networking for both Zigbee and 6LoWPAN Supports deployment of a dense network with 6LoWPAN Nebulae Module V2 Datasheet Benefits Figure 1-1. shows the Nebulae Module V2. Figure 1-1. Nebulae Module V2 Figure 1-2. shows Nebulae Module V2 application example. Nebulae Module V2 Datasheet System Level Solutions June 2018 Overview Figure 1-2. Nebulae Module V2 Application Example Specifications Table 1-1 describes specifications of the Nebulae Module V2. Table 1-1. Nebulae Module V2 Specifications Performance Data Rate Up to 250Kbps Range 80 Meters Line of Sight (LoS) TX Current Consumption 23.3mA@ +10dBm; 19.6mA@ +8.5dBm; 14mA @ +3dBm RX Current Consumption 15mA@ +10dBm; 13mA@ 0dBm RX Sensitivity -96 dBm System Level Solutions June 2018 Nebulae Module V2 Datasheet Specifications Table 1-1. Nebulae Module V2 Specifications Features Serial Interface SPI 1 SPI 3 Selects I2C 1 Interface 2 Wire UART 2 UART Configuration Method API local and from cloud Frequency Band ISM 2.4 GHz Interference Immunity DSSS (Direct Sequence Spread Spectrum) ADC Inputs Up to 6-input 10-bit Digital IO Up to 20 Antenna Options U.FL Connector Size (LxWxH in mm) 21.99 x 34 x 3.05 PWM Up to 5 PWM 4 Timers 1 Counter Modes Active Sleep Deep Sleep CPU Processing 1 MHz – 2.5mA 0.6 uA 50 nA 32 MHz – 7.8 mA Memory 512 kB Flash 32 kB RAM 4 kB EEPROM Clock/ Speed 1 MHz to 32 MHz CPU 32 Bit RISC Programmability Networking and Security Protocol 6LoWPAN Zigbee Encryption AES 128 Bit Reliable Packet Delivery Retries, Acknowledgements IDs PAN ID Address IPv6 Address to all nodes Channels 16 Power Requirement Supply Voltage 2.0V to 3.6V DC Temperature -40 ºC to 125 ºC Module Software Stack Zigbee Nebulae Module V2 Datasheet Zigbee Pro Stack System Level Solutions June 2018 Overview Table 1-1. Nebulae Module V2 Specifications 6LoWPAN Nebulae 6LoWPAN Stack Features : Three tier security Time synchronization Self healing Remote firmware update IPv6 enabled full IP networking Smart network management Easy network installation and deployment Supports dense network with flexible routing Power management, long battery life Design to withstand failure Highly scalable network Module Accessories Model TLB-2400-3.0BQ Manufacturer Shenzhen Gerbole Elec. Technology Co., Ltd. Gain 3dBi Type Whip-Tilt Connection Type RP-SMA Frequency Range 2400 +/-100 Module to Antenna Connection Type U.FL to RP-SMA Cable System Level Solutions June 2018 Nebulae Module V2 Datasheet 2. Pin-Out Information Table 2-1 shows the Nebulae Module V2 Pin-Out. Table 2-1. Nebulae Module V2 Pin-Out Pin No # Signal Name Direction Default State Description GND Ground VCC Power supply DIO11/PWM1/TXD1 Bidirectional Output DIO6/ UART 0 transmit data output DIO9/TIM0CAP/32KXTALIN/RXD1/ 32KIN(1) Bidirectional Input DIO7/ RXD0 - UART 0 receive data input DIO16/SPISMOSI/SIF_CLK/COMP1P Bidirectional DIO16/ COMP1P comparator plus input RESET_N Input Reset input DIO8/TIM0CK_GT/PC1/PWM4 Bidirectional Output DIO8/RX signal strength indicator DIO6/TXD0/JTAG_TDO/PWM2 Bidirectional DIO11/ PWM1 output DIO19/SPISEL0 Bidirectional DIO19/ SPI - bus master select output 0 10 DIO7/RXD0/JTAG_TDI/PWM3 Bidirectional Input DIO9/Pin sleep control line 11 GND Ground 12 DIO3/RFTX/TIM0CAP/ADC6 Output Output DIO3 13 GND Ground 14 DIO15/SIF_D/RXD0/RXD1/JTAG_TDI/ SPISEL2/SPISCLK Input Input DIO15/ SPI - bus slave clock input 15 DIO14/SIF_CLK/TXD0/TXD1/ JTAG_TDO/SPISEL1/SPISSEL Input Input DIO14/ SPI - bus slave select input 16 DIO12/PWM2/CTS0/JTAG_TCK/ADO/ SPISMOSI Input Input DIO12/ SPI - bus slave master out, slave in input 17 DIO13/PWM3/RTS0/JTAG_TMS/ADE/ SPISMISO Output Output DIO13/ SPI - bus slave master in slave out output 18 Reserved Disabled Do not connect System Level Solutions June 2018 Nebulae Module V2 Datasheet Pin-Out Information Table 2-1. Nebulae Module V2 Pin-Out Pin No # Signal Name Direction Default State Description 19 Reserved Disabled Do not connect 20 Reserved Disabled Do not connect 21 Reserved Disabled Do not connect 22 GND Ground 23 DIO18/SPIMOSI Bidirectional DIO18/ SPI - bus master out slave in output 24 DIO17/SPISMISO/SIF_D/COMP1M/ PWM4 Bidirectional DIO17/ comparator minus input 25 DIO4/CTS0/JTAG_TCK/TIM0OUT/ PC0 Bidirectional Output DIO4/ UART 0 clear to send input 26 DIO10/TIM0OUT/32KXTALOUT Bidirectional Output DIO10/Device status indicator 27 VREF Input Analog peripheral reference voltage/ ADC input 2 28 DO0/SPICLK/PWM2 Bidirectional Output DO0/ SPI - bus master clock output 29 DIO5/RTS0/JTAG_TMS/PWM1/PC1 Bidirectional Input DIO5/ UART 0 request to send output 30 DIO0/ADO/SPISEL1/ADC3 Bidirectional DIO0/ ADC input : ADC3 31 DIO1/ADE/SPISEL2/ADC4/PC0 Bidirectional DIO1/ ADC input : ADC4 32 DIO2/RFRX/TIM0CK_GT/ADC5 Bidirectional DIO2/ ADC input : ADC5 33 ADC1 Bidirectional Input ADC input 34 DO1/SPIMISO/PWM3 Bidirectional DO1/ SPI - bus master in, slave out input 35 GND Ground 36 RF_IO Bidirectional RF antenna 37 Reserved Disabled Do not connect Note: (1) Default: Pull down System Level Solutions June 2018 Nebulae Module V2 Datasheet 3. Package Information Figure 3-1. shows Physical Dimensions of the Nebulae Module V2. Figure 3-1. Nebulae Module V2 Physical Dimensions System Level Solutions June 2018 Nebulae Module V2 Datasheet Annexure A: FCC Statement (OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF Module. For 15 B (§15.107 and if applicable §15.107) compliance, the host manufacturer is required to show compliance with 15 while the module is installed and operating. Furthermore the module should be transmitting and the evaluation should confirm that the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the integrator has to apply the appropriate equipment authorization (e.g. Verification) for the new host device per definition in §15.101. Integrator is reminded to assure that these installation instructions will not be made available to the end-user of the final host device. The final host device, into which this RF Module is “integrated” has to be labelled with an auxilliary label stating the FCC ID of the RF Module, such as “Contains FCC ID:2AO93PI0NL02000100” “This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.” Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be System Level Solutions June 2018 Nebulae Module V2 Datasheet determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 10 Nebulae Module V2 Datasheet System Level Solutions June 2018 Annexure B: Module Statement The single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of § 15.212(a)(1) as summarized below. 3). The radio elements have the radio frequency circuitry shielded. 4). The module has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. 5). The module contains power supply regulation on the module. 6). The module contains a permanently attached antenna. 7). The module demonstrates compliance in a stand-alone configuration. 8). The module is labeled with its permanently affixed FCC ID label 9). The module complies with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. 10). The module complies with RF exposure requirements. This transmitter/module must not be collocated or operating in conjunction with any other antenna or transmitter. System Level Solutions June 2018 11 Nebulae Module V2 Datasheet
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2018:06:15 12:58:40Z Creator : FrameMaker 10.0.2 Modify Date : 2018:06:15 13:06:07+05:30 Language : en Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Elements 10.0.0 (Windows) Creator Tool : FrameMaker 10.0.2 Metadata Date : 2018:06:15 13:06:07+05:30 Format : application/pdf Title : untitled Document ID : uuid:9b24bcf0-648e-4692-a269-3e0a797c5094 Instance ID : uuid:960fa42d-fee9-46e7-9f81-5cd2830683df Page Mode : UseOutlines Page Count : 16EXIF Metadata provided by EXIF.tools