Systems and Technology STAVL0746 INTELLITRAC User Manual USERS MANUAL

Systems & Technology Corp. INTELLITRAC USERS MANUAL

USERS MANUAL

   © Systems & Technology Corp. All rights reserved.   IInntteelllliiTTrraacc  XX11--PPRROO             UUsseerr’’ss  MMaannuuaall        Version: 1.0 Date:   Nov, 14 2006 Status:   Preliminary
   © Systems & Technology Corp. All rights reserved. General notes   With respect to any damages arising in operation with the described product or this document, S&T shall be liable according to the General Conditions on which the delivery of the described product and this document are based. This product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury. S&T customers using or selling this product for use in such applications do so at their own risk and agree to fully indemnify S&T for any damages resulting from illegal use or resale. Information in this document is subject to change without notice at any time.  Copyright notice  Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages.  © Systems & Technology Corp. All rights reserved
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved. TTaabbllee  OOff  CCoonntteennttss  1 Features ...................................................................................................................................1 2 System Requirements.............................................................................................................1 3 Product Contents....................................................................................................................1 4 Hardware Installation ............................................................................................................2 4.1 Install SIM card ............................................................................................................................2 4.2 Install Cables................................................................................................................................2 4.3 Mounting the unit .........................................................................................................................3 5 Software Installation ..............................................................................................................4 5.1 Configuration Software ................................................................................................................4 5.2 Firmware Download Software......................................................................................................5 6 Specifications...........................................................................................................................6 7 Electrical characteristics........................................................................................................6 7.1 Absolute maximum ratings...........................................................................................................6 7.2 Operating temperatures...............................................................................................................6 7.3 LED Indicators .............................................................................................................................7 8 About Systems & Technology Corporation..........................................................................8
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved.  - 1 - 11  FFeeaattuurreess  z  20 channels GPS receiver with high sensitivity up to –159dBm z  Tri-band GSM/GPRS (850 / 1800 / 1900 MHz) solution z  Intelligent real time tracking mode z  High capacity Li-Polymer backup battery z  Advanced power management z  Journey logging for thousands position z  Remote configuration and firmware upgrade  22  SSyysstteemm  RReeqquuiirreemmeennttss  The IntelliTrac X1-PRO configuration software is based on Microsoft Windows systems. Windows Systems:Win98/Me/2000/XP  33  PPrroodduucctt  CCoonntteennttss     IntelliTrac X1-PRO device  Power I/O Cable  Serial Cable    GPS Receiver  GSM/GPRS Antenna  Holding Bridles    CD (User manual & Software)
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved.  - 2 -  44  HHaarrddwwaarree  IInnssttaallllaattiioonn  4.1  Install SIM card Press the yellow button to enject the SIM card holder and insert the SIM card. If you would like to disable the PIN code, please use general GSM cellular phone to disable the PIN code in advance.   4.2 Install Cables z Install I/O cable The I/O cable is a 10-wires cable which include power and positive/negative inputs and outputs.  The I/O cable pins assignment shown below : Pin Number  Description 1  DC power source ( 8V ~ 30V ) 2  Ground 3  Input1 (ACC Positive trigger input) 4  Output1 5  Input2 (Positive trigger) 6  Output2 7  Input3 8  Output3 9  Input4
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved.  - 3 - 10  Output4 (Internal 2A Relay)  z Install GSM Antenna Connect the GSM antenna to the SMA connector with lable “GSM”.  z Install GPS Receiver Connect the GPS receiver to the Mini DIN connector with label “GPS”. Use a nylon cable tie to prevent unexpected come off.  z Install RF Receiver (Optional) Connect the RF receiver ti the 3 pins connector with label “RF”.  4.3  Mounting the unit For mounting the unit, bind to the body the holding bridles according the the schema below :
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved.  - 4 - 55  SSooffttwwaarree  IInnssttaallllaattiioonn  5.1 Configuration Software
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved.  - 5 - 5.2  Firmware Download Software
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved.  - 6 - 66  SSppeecciiffiiccaattiioonnss         77  EElleeccttrriiccaall  cchhaarraacctteerriissttiiccss  7.1  Absolute maximum ratings Absolute maximum rating for power supply and voltage on digital input pins of the IntelliTrac X1-PRO are list in following table: Parameter  Min  Max  Unit Supply Voltage  8  30  V Positive trigger Input Voltage  5  30  V Positive trigger Input current  35   uA Negative trigger Input Voltage  0  0.7  V Output current   400  mA Relay output current   2  A Power current consumption (Standby mode)  40  45  mA @ 12VDC Power current consumption (GPS Off mode)  24  26  mA @ 12VDC Power current consumption (Deep sleep mode) 15  15  mA @ 12VDC  7.2 Operating temperatures The operating temperature is listed in following table: Parameter  Min  Typ  Max  Unit Ambient temperature  -20  25  55  ℃ Restricted temperature*  -20 ~ -40  55 ~ 85  ℃ Storage Temperature  -40   85  ℃ *The IntelliTrac X1-PRO device can work, but the deviation from the specification may occur. Dimension  90mm x 70mm x 30mm Weight  250g Input Ports  4 Inputs (2 positive, 2 negative) Output Ports  4 Outputs (4 negative trigger) GPS Datum  WGS-84 GPS Frequency  L1, 1575.42MHz GPS Channel  20 GPS Tracking sensitivity  -159dBm typ. GPS Cold Start  40secs GPS Warm Start  25secs GPS Hot Start  3secs GPS Update Rate  1Hz GPS Accuracy  3m CEP (50%), 7m (90%) GPS Baud Rate  19200bps GSM/GPRS Frequency  Tri-Band 850/1800/1900MHz GPRS  Multi-slot class 10 SMS  PDU mode Data mode  CS Data Voice mode  HR/FR/EFR
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved.  - 7 - 7.3 LED Indicators PWR LED Status  Function Off  Power off 20 ms On / 2 secs Off  The device is running in power saving mode. 500ms On / 500ms Off    Reset procedure is in progress 20ms ON / 20ms Off  Upgrade firmware is in progress On  Power on  GPS LED Status  Function Off  The GPS is off or running in power saving mode. 1 sec On / 1 sec Off    No GPS satellites signal received On  GPS Ready  GSM LED Status  Function Off  The device is off or running in deep sleep mode. 600 ms On / 600ms Off  No SIM card inserted or no PIN entered, or network search in progress, or network login in progress. 90 ms On / 3 secs Off  Logged to network. 90 ms blinking 2 times /3secs Off  GPRS Network connected
 IntelliTrac X1-PRO User’s Manual   © Systems & Technology Corp. All rights reserved.  - 8 -  88  AAbboouutt  SSyysstteemmss  &&  TTeecchhnnoollooggyy  CCoorrppoorraattiioonn  IntelliTrac X Series AVL device is produced by Systems & Technology Corporation. The company is a key developer and supplier of advanced systems in the Automatic Vehicle Location (AVL), Digital Map and Car Navigation Systems.  If you need information on other maps solutions or products, please contact us at the phone and fax numbers listed below, or visit our web sites.    Contact Information for System & Technology Corp. S&T Web Site        http://www.systech.com.tw Technical Support Hotline  886-2-26981599 Technical Support E-mail  AVL@ms.systech.com.tw Main Phone     886-2-26981599 Main Fax     886-2-26981211   WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

Navigation menu