Systems and Technology STAVL0915 INTELLITRAC User Manual AVLP08002 UM
Systems & Technology Corp. INTELLITRAC AVLP08002 UM
Users Manual
IntelliTrac A Series User Guide Version: Date: Status: v1.0 Feb. 27, 2009 Preliminary Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. General notes With respect to any damages arising in operation with the described product or this document, S&T shall be liable according to the General Conditions on which the delivery of the described product and this document are based. This product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury. S&T customers using or selling this product for use in such applications do so at their own risk and agree to fully indemnify S&T for any damages resulting from illegal use or resale. Information in this document is subject to change without notice at any time. Copyright notice Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. © Systems & Technology Corp. All rights reserved Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. IntelliTrac A Series User Guide Table Of Contents 1. Introduction.............................................................................................................................1 1.1 1.2 1.3 1.4 2. Basic Operations .....................................................................................................................5 2.1 2.2 2.3 2.4 2.5 2.6 3. 4. Scope 1 About IntelliTrac A1 ...................................................................................................................... 2 Hardware Architecture ................................................................................................................. 3 Related Documents ..................................................................................................................... 4 Hardware Installation ................................................................................................................... 5 Connectors Pins Assignment ....................................................................................................... 7 Device Configurations.................................................................................................................. 8 Communication Settings ............................................................................................................ 12 GPS Tracking Configurations..................................................................................................... 14 Firmware Upgrade ..................................................................................................................... 16 Technical Specification for IntelliTrac A1 .........................................................................17 About Systems & Technology Corporation........................................................................18 Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. IntelliTrac A Series User Guide 1. Introduction Thank you for your purchasing IntelliTrac A1 GPS Vehicle Tracking device. The benefits are: Improve Safety Ensure Security Good efficiency on Fleet management and Dispatch solution Asset and resource management Economic operation and improving productivity Keep the Journey record for future analysis or accident report Where is the Car? When it will arrive? What is its speed now? If you add the CAN-Bus Option, You will get the following features: Reduce Vehicle maintenance cost Schedule maintenance Vehicle performance information 1.1 ‧ Engine coolant temperature ‧ Air intake temperature ‧ Oil pressure ‧ OBD II/EOBD Data collection ‧ Vehicle monitor data statistics ‧ Idle time (Engine is ON, Speed is Zero) ‧ Odometer reading ‧ Fuel economy ‧ Oxygen sensor status ‧ Catalyst status ‧ Vehicle out of tune ‧ Speed, Calculation load, Throttle position ‧ Remote Diagnostics --- Trouble code reporting Scope The purpose of this document is to describe how to getting started with the IntelliTrac A Series devices. The document contains basic device configuration. For advanced users, please refer to the IntelliTrac A Series Protocol Document for detailed information. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -1- IntelliTrac A Series User Guide 1.2 About IntelliTrac A1 The IntelliTrac A1 GPS Unit wirelessly transmits location, peripheral, and vehicle control data to a control center. Location data, including speed, direction, mileage, and altitude, is provided by an onboard GPS receiver. Wireless transmission is achieved using an onboard GSM/GPRS module. A microcontroller is used to poll location and command data at regular intervals, derive actions based on location, peripheral, and control data, and execute those actions. One of the best feature of A series AVL is that they can transit data on ASCII mode ( Intellitrac X series compatible mode ) or Binary mode. Peripheral data indicates the status of the various peripherals that are connected to and/or controlled by the unit. Peripherals include, but not limited to, door locks/un-locks , starter interrupt, ignition, battery, engine and panic button. Firmware on the device applies intelligent filtering to overcome coverage limitations for both GPS and GSM/GPRS networks. Motion sensor is used to control the status of the unit, either sleep, idle, or full power, there by controlling the amount of current the unit consumes. Backup battery and tamper sensing GPS Antennas are primarily used to indicate loss of Main Power and loss of GPS antenna connectivity. Device supports Over-the-air firmware upgrade to deliver added functionality without physically touching the device once installed. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -2- IntelliTrac A Series User Guide 1.3 Hardware Architecture The IntelliTrac A1 hardware includes Micro-controller, GPS receiver, GSM/GPRS modem, G-Force sensor, Audio interface, I/Os interface and CAN bus interface. * The options can be used to connect to CCD Camera, fuel sensor, Altimeter, SAE J1939, Bluetooth and Zigbee. z User can use PC HyperTerminal connect to the Diagnostic / setting port to configure the AVL. z The G-Sensor is used for car accident. Car tow-away warning and power management. z Audio interface offer hands free phone call. z GPIO can be used to connect to any customer monitoring points (door switch, anti-thief) or Actuators. z A/D Input is used to connect the analog signal sensor into the AVL. Like the fuel or temperature sensor. z OPTIONAL CAN-Bus Interface can be used for Emission Related monitoring of the vehicle. Fleet management and vehicle Diagnostic. z OPTIONAL I2 C Bus. SPI Bus can be used for sophisticated peripherals to hook up to the AVL. z RS232 Expansion port 1-2. Dedicated for A3. It can be used to add on RS232 I/O peripherals. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -3- IntelliTrac A Series User Guide z RTOS OPTION: We will have A1, A3 professional version with Real Time operation system in JUN.2009.. 1.4 Related Documents [1] IntelliTrac A Series Protocol Document Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -4- IntelliTrac A Series User Guide 2. Basic Operations 2.1 Hardware Installation (1) SIM Card Installation Press yellow button to eject the SIM card holder. Put the SIM card on the SIM card holder. Insert the SIM card holder to the device correctly. (2) GPS Antenna Installation Connect the GPS antenna to the right-down corner SMA connector. Recommended mating torque for the SMA connector is 7-10 inch pounds (80-110 N.cm). Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -5- IntelliTrac A Series User Guide (3) GSM Antenna Installation Connect the GSM antenna to the right-up corner SMA connector. Recommended mating torque for the SMA connector is 7-10 inch pounds (80-110 N.cm). (4) Power and RS-232 Cable Installation Connect 4-wires power cable to the device and plug on a DC power supply (8~30V). Connect 8-wires cable to the device. The D-SUB can be connected to the COM port of PC. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -6- IntelliTrac A Series User Guide 2.2 Connectors Pins Assignment PWR Connector Pin# Signal Name B+ GND Ignition Output1 Description Power supply input Signal ground Ignition(ACC) Input Open-Collector Output1 IO - Electrical Characteristic VI = DC8V to 30V, Inormal = 70mA @ 12V Description Positive Trigger input3 Positive Trigger input4 Negative Trigger input1 Negative Trigger input2 Analog input Signal ground Open-Collector Output2 Open-Collector Output3 CAN High CAN Low IO - Electrical Characteristic VIHmin = 7.0V, VILmax = 6.0V VIHmin = 7.0V, VILmax = 6.0V VIHmax = 30V, VILmax = 0.7V VIHmax = 30V, VILmax = 0.7V VI = DC0V to 30V Description Supply voltage output Signal ground RS232 Data output RS232 Data input Audio output Audio output Microphone Input Microphone Input IO - Electrical Characteristic Vo = 5.0V, Imax = 300mA VIHmin = 7.0V, VILmax = 6.0V Imax = 300mA I/O Connector Pin# 10 Signal Name Input3 Input4 Input1 Input2 Analog Input GND Output2 Output3 CANH CANL Imax = 300mA Imax = 300mA VI = 2.75V to 4.5V VI = 0.5V to 2.25V SERIAL Connector Pin# Signal Name Vout GND TX RX SPK+ SPKMIC+ MIC- VOmax = 3.7Vpp RI ≈ 50kΩ differential VImax = 1.03Vpp Connectors pin definition Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -7- IntelliTrac A Series User Guide 2.3 Device Configurations For the first installation, some basic parameters should be set before installation. The device parameters can be set through RS-232 port by using HyperTerminal program. Please see below for the HyperTerminal settings: (1) Open HyperTerminal (2) Choose correct COM port (3) Baud RateÆ57600bps, Data BitsÆ8, ParityÆNone, Stop BitsÆ1, Flow ControlÆNone Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -8- IntelliTrac A Series User Guide (4) Choose [File]Æ[Properties] and click [ASCII Setup…] (5) Checked below ASCII Sending options Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. -9- IntelliTrac A Series User Guide (5) Connect D-Sub connector to your PC and power on the device. The device startup message will be shown on the HyperTerminal. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 10 - IntelliTrac A Series User Guide (6) Type ATI command and press [Enter] key, the hardware and firmware version will be shown on the HyperTerminal. If the HyperTerminal is shown like below, that means connection between the device and PC is working properly. It is ready to send all configuration commands from now on. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 11 - IntelliTrac A Series User Guide 2.4 Communication Settings There are two communication modes for the IntelliTrac A series device to communicate to the control center. One is SMS, and the other is GPRS (TCP/UDP). The device should be set communication parameters before install the device to vehicle. (1) SMS Configuration Setting SMS control center phone number or short code by using AT$SMSDST command. For example, the SMS control center phone number is +886123456789, issue the AT$SMSDST command in HyperTerminal like below: AT$SMSDST=+886123456789 OK Then you can try to use cellular phone or SMS gateway to send a SMS message to the A1 device. Send a SMS message Æ "AT$MODID?" Device will response: $MODID=101000001 OK (Type AT&W command to save all command parameters into the non-volatile memory of the device.) AT&W OK This proves the mobile phone SMS connects successfully. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 12 - IntelliTrac A Series User Guide (2) GPRS Configuration Setting GPRS server using the following commands: AT$APN=internet,username,password (APN=internet, Username=username, Password=password) OK AT$HOSTS=1,60.148.19.10 (Server IP address = 60.148.19.10) OK AT$RETRY=5,10 (Message retry settings) OK AT$IPTYPE=1 (Using TCP/IP mode) OK AT$PORT=6000 (Host application port) OK AT$GPRSEN=1 (GPRS enable) OK AT$HB=60 (Heartbeat setting) OK (Type AT&W command to save all command parameters into the non-volatile memory of the device.) AT&W OK Please refer to IntelliTrac A Series Protocol Document for detailed command descriptions. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 13 - IntelliTrac A Series User Guide 2.5 GPS Tracking Configurations After the device communication settings are done. The remote GPS tracking function can be performed. The GPS tracking function can be set by using AT$PDSR command. For example, AT$PDSR=1,30,0,2,0,0,1,1 (Tracking through GPRS by time interval 30 seconds) OK For the simply testing GPRS, open the TCP Server A-Series software which is provided by S&T. It is a simple server software that can wait for device connection and data. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 14 - IntelliTrac A Series User Guide For advanced testing, open the IntelliTrac Tracer software and set communication port properly. The device will start to connect to the Tracer software and report GPS tracking locations. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 15 - IntelliTrac A Series User Guide 2.6 Firmware Upgrade The IntelliTrac A Series device firmware is updated through the serial interface. The firmware update of the device can be performed with the IntelliTrac A series firmware loader tool provided by S&T. It runs on Windows based PCs. Please see the following step-by-step upgrade procedure. (1) Connect the RS232 cable between device an PC. (2) Turn on the device. (3) Run AseriesLoader.exe, the following window is displayed. (4) Click […] button to open firmware file which provide by S&T (5) Click Write button and start firmware programming. (6) When the writing progress 100% is reached, the device LEDs will start to fast blinking. (7) Wait until device LEDs stop fast blinking. (8) Firmware update complete. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 16 - IntelliTrac A Series User Guide 3. Technical Specification for IntelliTrac A1 CHARACTERISTICS Dimensions ( L x W x H) Weight Radio Performance Frequency (MHz) Transmit Power GSM Functionality / GPRS GPRS Mode GPRS Coding Scheme Connector GSM Antenna SIM Interface GPS Functionality Receiver Sensitivity ( Tracking ) Antenna Type Connector GPS Protocol Onboard Components MCU Data Memory Motion Sensor Led Indicator 110.0 x 95.0 x 30.0mm 110gm Quad-Band 850/900/1800/1900MHz 1W/1800MHz,1900Mhz 2W/850MHz, 900MHz MultiSlot Class 10 , Mobile Station Class B CS1,CS2,CS3 and CS4 SMA External GSM Antenna Support SIM card 1.8V, 3V 12 Channels or above -159dBm External GPS Active Antenna , 3.3V SMA Female NMEA 0183 Ver3.0 32-bit Microcontroller 2MB flash 3-Axes Acceleration Sensor 3 , Green (Power status ) , Red ( GPS, GSM status ) Interface I/O I/O Connector Serial Data I/O Inputs Outputs Analog CAN Bus Voice Interface 3 connectors. 4pin, 10pin, and 8 pin RS-232 (Default 57600bps) 1 (Optional) Electrical Power Source DC 8V to 30V Power Consumption 70mA @ 12V (Full power mode) 15mA @ 12V (Low power mode) 6mA @ 12V (Very low power mode) Environment Operating Temperature -30oC to +80oC Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 17 - IntelliTrac A Series User Guide 4. About Systems & Technology Corporation IntelliTrac A-Series AVL device is produced by Systems & Technology Corporation. The company is a key developer and supplier of advanced systems in the Automatic Vehicle Location (AVL), Digital Map and Car Navigation Systems. If you need information on other maps solutions or products, please contact us at the phone and fax numbers listed below, or visit our web sites. Contact Information for System & Technology Corp. S&T Web Site Technical Support Hotline Technical Support E-mail Main Phone Main Fax http://www.systech.com.tw +886-2-2698-1599 AVL@ms.systech.com.tw +886-2-2698-1599 +886-2-2698-1211 Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 18 - IntelliTrac A Series User Guide FCC Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. 4RF Exposure Information This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. zThis device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Systems & Technology Corp. © 2008 This document contains confidential, restricted, and proprietary information. The document has been prepared for the exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in part, without the prior, written consent of an authorized officer of S&T. - 19 -
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2009:04:21 16:15:49+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2009:04:21 16:15:49+08:00 Format : application/pdf Title : Microsoft Word - AVLP08002-UM.doc Creator : May Document ID : uuid:aa1cec65-9765-4892-b714-488d86404cb4 Instance ID : uuid:9101890b-0e3c-4a61-ae6f-88b2c06b73e5 Page Count : 22 Author : MayEXIF Metadata provided by EXIF.tools