T Heng Mechanical and Eletrical 1300 pH meter pH ORP meter Conductivity meter Do meter User Manual

T-Heng Mechanical & Eletrical Co., Ltd. pH meter pH ORP meter Conductivity meter Do meter

User Manual

Download: T Heng Mechanical and Eletrical 1300 pH meter pH ORP meter Conductivity meter Do meter User Manual
Mirror Download [FCC.gov]T Heng Mechanical and Eletrical 1300 pH meter pH ORP meter Conductivity meter Do meter User Manual
Document ID3288962
Application IDUG7B7hiAgwMTqEN/aeG3MQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize125.35kB (1566826 bits)
Date Submitted2017-02-20 00:00:00
Date Available2017-02-20 00:00:00
Creation Date2013-01-22 09:04:52
Producing SoftwareAdobe PDF Library 9.9
Document Lastmod2017-02-18 09:47:19
Document TitleUser Manual
Document CreatorAdobe InDesign CS5.5 (7.5.2)

pH meter pH ORP meter Conductivity meter Do meter
1300
T-Heng Mechanical & Electrical Co. Ltd.
Tel: (+86) 010-60251782 Fax: (+86) 010-60252017
Web: www.t-heng.com
pH meter pH ORP meter Conductivity meter Do meter 1300
T-HENG
ALL RIGHTS RESERVED
Printed in the CHINA
The contents of this manual may not be reproduced or
transmitted in any form or by any means electronic,
mechanical, or other means that do not yet exist or
may be developed, including photocopying, recording,
or any information storage and retrieval system without
T-HENG
T-Heng Mechanical & Electrical Co. Ltd.
Tel: (+86) 010-60251782 Fax: (+86) 010-60252017
Web: www.t-heng.com
TABLE OF CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
POWER SUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
LCD DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
MATERIALS SUPPLIED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SETUP MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CALIBRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MEASUREMENT PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
OPTIONAL ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
INTRODUCTION
The T-HENG Advanced Rugged pH ORP Meter(Model 1300) is the most waterproof,
rugged and reliable pH ORP meter on the market. It is fully waterproof,
including probe connections, when used with the Advanced Rugged probe.
As with all Advanced Rugged meters, pH ORP Meter model 1300 is fully shockproof, floats,
and features a double injection molded case with an integral protective soft grip outer layer,
high end antishock, LED backlight display, and is powered by the latest environmentally
friendly, long lasting, rechargeable Lithium Ion battery. The meter is highly accurate and stable,
very intuitive and includes all of the functions required by most users. T-HENG guarantees you
will not find any meters more rugged and reliable than Advanced Rugged Series.
FEATURES
• Floats
• Shockproof
• IP67 Waterproof
• Protective soft grip outer layer
• Rechargeable Lithium Ion battery
• Also accepts standard BNC probes
• Multi-line display LCD screen
• Reads pH and mV (ORP)
• Automatic or manual temperature compensation
• Automatic buffer recognition
• Celsius or Fahrenheit selectable
• 99 data points for analysis
• Calibration point review
• Internal clock and calendar
• Maximum, minimum and average
• Hold function
• Low battery indicator
• Backlight
MATERIALS SUPPLIED
• Meter
• Dual pH/ATC Probe
• 1 Lithium 1450 mAh 7.4 V Battery
• DC Power Adapter
• Instruction Manual
• Hard Carrying Case
LCD DISPLAY
Name
Ready
Electrode Durability Icon
Scale Unit
Measuring Results
ATC/MTC
Temperature Scale
Temperature Value
Battery Icon
Description
Displayed when measuring results are stable
Current electrode durability
Current measurement scale unit
Current measurement value
Automatic/Manual Temperature Compensation indicator
Current temperature measurement unit
Current temperature measurement value
Current battery power level
LCD DISPLAY
Probe Life Icon:
More than 90% life remaining
More than 85 –90% life remaining
More than 80 -85% life remaining
Less than 80% life remaining
Battery Power Icon:
Battery voltage is more than 7.7V shows full.
Battery voltage between 7.2V and 7.7V shows 2 cells.
Battery voltage between 6.6V and 7.2V shows 1 cell.
Battery voltage less than 6.6V shows 0 cells and flashes.
Display showing battery charging from
less than 6.6V to fully charged.
POWER SUPPLY
This meter is powered by one Li-Ion (Lithium 7.4 V, 1450 mAh) battery. The DC power
adapter will charge the battery. This meter includes a charge protection function and will
automatically stop charging when the battery is full with the meter turned off or on. A
complete re-charge takes approximately 8 hours.
KEYPAD
Name
Power/Backlight/Low Battery
Setup
MI↑
MR↓
Max/Min/Ave
Range/Temp
Hold/Exit
CAL
1st Function
Power on/off
Setting parameters
Store data
Recall data
Max/Min/Ave
Switch measuring scale
Hold
Calibration
2nd Function
Backlight on/off
Confirm setting
↑
↓
Set temperature value
Exit
SETUP MODE
The Setup Mode allows you to customize the following meter preferences and defaults:
• Temperature Units
• Clock Setting
• Restore Factory Defaults
• View Calibration Data
• View Probe Parameters
1. Press POWER for 1 second to turn the meter on before performing any setup
function.
Temperature Units
1. Press SETUP to enter the Setup Mode.
2. Press SETUP to enter the Set Temperature screen.
3. The unit °C or °F will flash on the LCD.
4. Press ↑ or ↓ to select the Celsius or Fahrenheit temperature unit.
5. Press SETUP to save and return to Normal Mode.
6. Press EXIT to return to Normal Mode without saving the selection.
Real Time Clock
1. Press SETUP to enter the Setup Mode.
2. Press ↑ or ↓ to select the Set Clock screen.
3. Press SETUP to set the year. The value will flash on the LCD.
4. Press ↑ to increase the value by 1. Hold down ↑ to continually increase the value.
Press ↓ to decrease the value by 1. Hold down ↓ to continually decrease the value.
Press SETUP to save and the meter automatically moves to the month setting.
5. Repeat step 4 to adjust the month, day, hour, and minute.
6. Press EXIT to return to Normal Mode without saving.
Note...
This procedure adjusts the meter’s internal clock. The internal clock will function when
the meter is turned off but only when the battery is installed.
SETUP MODE
Restore Factory Settings
1. Press SETUP to enter the Setup Mode.
2. Press ↑ or ↓ to select the Restore Factory Settings screen.
3. Press SETUP to confirm selection. “NO” will flash on the LCD.
4. Press ↑ or ↓ to select “YES” or “NO.”
5. When “YES” is displayed, press SETUP to confirm and all parameters will restore to
factory settings (except the clock) and the meter returns to Normal Mode.
6. Press EXIT to return to Normal Mode without saving.
View Calibration Data
1. Press SETUP to enter the Setup Mode.
2. Press ↑ or ↓ to select the View CAL Data screen.
3. Press SETUP to enter the mode.
4. Press ↓ to view the previous calibration point. Press ↑ to view the next calibration
point. The date and time is on cyclical display.
5. Press EXIT to return to Normal Mode.
View Probe Parameters
1. Press SETUP to enter the Setup Mode.
2. Press ↑ or ↓ to select the View Probe Parameters screen.
10
SETUP MODE
Note...
If the meter is not calibrated, the screen will show:
Press SETUP or EXIT to return to Normal Mode.
CALIBRATION
Calibration should be performed whenever the probe has been out of use for 48 hours or
longer. To prepare for calibration:
1. Immerse the pH probe in standard buffer solution for 30 minutes or longer.
Calibrate With Temperature Sensor/ATC pH Probe
1. Press CAL for 2 seconds to enter Calibration Mode.
2. The meter will automatically recognize the NIST standard calibration buffer. The value
and “Finished” will display on the LCD when the procedure is complete.
3. Press EXIT to return to Normal Mode.
4. Repeat Steps 1-2 to calibrate other points.
Note...
All other keys will be inoperable while using the calibration function.
11
CALIBRATION
Calibrate Without Temperature Sensor/MTC pH Probe
1. Press CAL for 2 seconds to enter Temperature Setup Mode. The temperature value
will flash on the LCD.
2. Press ↑ to increase the value. Hold down ↑ to continually increase the value.
Press ↓ to decrease the value. Hold down ↓ to continually decrease the value.
For °C, the range is 0 ~ 60.0°C; for °F, the range is 32 ~ 140.0°F.
Press SETUP and the meter will automatically recognize the NIST standard
calibration buffer. The value and “Finished” will display on the LCD when the
procedure is complete.
Repeat Step 2 to calibrate other points.
3. Press EXIT to return to Normal Mode.
12
MEASUREMENT
PROCEDURES
Turning the Unit On/Off
1. Press POWER to turn the meter on.
2. Press and hold POWER for 2 seconds to turn the meter off.
Backlight
1. With the meter on press POWER to turn the backlight on/off.
Scale Selection
1. Press RANGE to switch between the pH and mV scales.
Setting the MTC Temperature
Do NOT connect the temperature sensor or non-ATC probe while setting the
temperature.
1. From Normal Mode, press RANGE for 2 seconds to enter Set Temperature Mode.
The temperature value will flash on the LCD.
2. Press ↑ to increase the value. Press and hold ↑ to increase the value continuously.
Press ↓ to decrease the value. Press and hold ↓ to decrease the value continuously.
For °C, the range is 0 ~ 60.0°C; for °F, the range is 32 ~ 140.0°F.
3. Press SETUP to save and the meter returns to Normal Mode.
4. Press EXIT to return to Normal Mode without saving.
Saving to Memory
1. Press MI to save the current value and view the data point number. There
are 99 data points available.
13
MEASUREMENT
PROCEDURES
Recall Memory
1. Press RANGE to select the scale (pH or mV) for recall.
2. Press MR to enter Recall Mode and view the last measured value. The date and time
are on cyclical display.
3. Press ↑ or ↓ to scroll saved data points.
4. Press EXIT to return to Normal Mode.
Clear Memory
1. Press MI and MR simultaneously for 2 seconds to clear all memory. The meter will
return to Normal Mode.
Maximum, Minimum, and Average
1. Press RANGE to select the scale.
2. Press MAX/MIN/AVE, the maximum recorded value will appear on the LCD. The date
and time is on cyclical display.
3. Press MAX/MIN/AVE, the minimum recorded value will appear on the LCD. The date
and time is on cyclical display.
4. Press MAX/MIN/AVE, the average recorded value will appear on the LCD. The date
and time is on cyclical display.
5. Press MAX/MIN/AVE to return to Normal Mode.
Hold
1. Press HOLD to hold the value.
2. Press HOLD to release the hold value.
Note...
When in Hold Mode, all other functions will be disabled except turning the meter off,
backlight function, saving, and exiting Hold Mode.
14
OPTIONAL
ACCESSORIES
9202 Standard pH Probe (non-ATC)
9301 Advanced Rugged ORP Probe
9204 Standard pH Probe (ATC)
9201 Advanced Rugged ATC pH Probe
8201 pH 4.01 Buffer Solution - 1 bottles of 25ml
8202 pH 6.86 Buffer Solution - 1 bottles of 25ml
8203 pH 9.18 Buffer Solution - 1 bottles of 25ml
8200 Deionized Water - 1 bottles of 25ml
15
SPECIFICATIONS
Power Button Indicator Light
Power Off
Power On
Low Battery
Charging Battery
Light off
Green light for 5 seconds, then light off
Red light flashes every 5 seconds
Blue light on
Mode
Range
pH
0 ~ 14 pH
Resolution
Accuracy
Input
±0.01 pH
±0.02 pH
BNC Connector
Calibration
Memory
pH Slope Range
Temperature
Compensation
Operating
Temperature
Battery
Battery Life
Up to 5 points
Up to 99 data points
75% ~ 110%
Temperature
32 ~ 140°F
(0 ~ 60°C)
0.1°F (0.1°C)
±0.9°F (±1.0°C)
Temperature Probe
Connector
mV
-1999 ~ 1999 mV
0.1 mV
±0.3 mV
BNC Connector
Automatic (ATC) or manual (MTC) from 32 ~ 140°F or 0 ~ 60°C
32 ~ 122°F (0 ~ 50°C)
Lithium battery 7.4 V (1450 mA/h)
> 200 hours
16
T-Heng Mechanical & Electrical Co.,Ltd.
Revised 09/01/2014
17
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Create Date                     : 2013:01:22 09:04:52-07:00
Metadata Date                   : 2017:02:18 09:47:19+08:00
Modify Date                     : 2017:02:18 09:47:19+08:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5.2)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 5135 bytes, use -b option to extract), (Binary data 5532 bytes, use -b option to extract)
Thumbnail Width                 : 204
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5241 bytes, use -b option to extract)
Instance ID                     : uuid:07e1a4a5-cb99-4092-9b7e-6053200bb6c0
Document ID                     : xmp.did:3A66AC24672068118A6DD38B70A64686
Original Document ID            : xmp.did:F77F117407206811871FFE3D488AD683
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F77F117407206811871FFE3D488AD683, xmp.iid:F87F117407206811871FFE3D488AD683, xmp.iid:F97F117407206811871FFE3D488AD683, xmp.iid:FA7F117407206811871FFE3D488AD683, xmp.iid:FB7F117407206811871FFE3D488AD683, xmp.iid:FC7F117407206811871FFE3D488AD683, xmp.iid:FD7F117407206811871FFE3D488AD683, xmp.iid:FE7F117407206811871FFE3D488AD683, xmp.iid:F77F1174072068118A6D9699CF3EFF9B, xmp.iid:F87F1174072068118A6D9699CF3EFF9B, xmp.iid:F97F1174072068118A6D9699CF3EFF9B, xmp.iid:FA7F1174072068118A6D9699CF3EFF9B, xmp.iid:FB7F1174072068118A6D9699CF3EFF9B, xmp.iid:FC7F1174072068118A6D9699CF3EFF9B, xmp.iid:FD7F1174072068118A6D9699CF3EFF9B, xmp.iid:FE7F1174072068118A6D9699CF3EFF9B, xmp.iid:FF7F1174072068118A6D9699CF3EFF9B, xmp.iid:00801174072068118A6D9699CF3EFF9B, xmp.iid:329DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:339DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:349DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:359DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:369DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:379DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:389DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:399DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:3A9DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:3B9DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:3C9DDB1F1A2068118A6D9699CF3EFF9B, xmp.iid:D6FAD9237A2068118A6D9699CF3EFF9B, xmp.iid:D7FAD9237A2068118A6D9699CF3EFF9B, xmp.iid:D8FAD9237A2068118A6D9699CF3EFF9B, xmp.iid:D9FAD9237A2068118A6D9699CF3EFF9B, xmp.iid:01801174072068118A6DD38B70A64686, xmp.iid:02801174072068118A6DD38B70A64686, xmp.iid:03801174072068118A6DD38B70A64686, xmp.iid:04801174072068118A6DD38B70A64686, xmp.iid:06801174072068118A6DD38B70A64686, xmp.iid:08801174072068118A6DD38B70A64686, xmp.iid:09801174072068118A6DD38B70A64686, xmp.iid:0255EAB9572068118A6DD38B70A64686, xmp.iid:0555EAB9572068118A6DD38B70A64686, xmp.iid:0755EAB9572068118A6DD38B70A64686, xmp.iid:0855EAB9572068118A6DD38B70A64686, xmp.iid:0955EAB9572068118A6DD38B70A64686, xmp.iid:0A55EAB9572068118A6DD38B70A64686, xmp.iid:0C55EAB9572068118A6DD38B70A64686, xmp.iid:3266AC24672068118A6DD38B70A64686, xmp.iid:3366AC24672068118A6DD38B70A64686, xmp.iid:3466AC24672068118A6DD38B70A64686, xmp.iid:3566AC24672068118A6DD38B70A64686, xmp.iid:3666AC24672068118A6DD38B70A64686, xmp.iid:3766AC24672068118A6DD38B70A64686, xmp.iid:3966AC24672068118A6DD38B70A64686, xmp.iid:3A66AC24672068118A6DD38B70A64686, xmp.iid:3B66AC24672068118A6DD38B70A64686, xmp.iid:3C66AC24672068118A6DD38B70A64686, xmp.iid:2E3C6916272168118A6DD38B70A64686, xmp.iid:F77F11740720681188C6D656D2B9166D, xmp.iid:F87F11740720681188C6D656D2B9166D, xmp.iid:83C692B3C47DE1119FDAE9E4FE741797, xmp.iid:84C692B3C47DE1119FDAE9E4FE741797, xmp.iid:88C692B3C47DE1119FDAE9E4FE741797, xmp.iid:1CA037E17B7EE111A324ABFED6DD92A5, xmp.iid:1DA037E17B7EE111A324ABFED6DD92A5, xmp.iid:1FA037E17B7EE111A324ABFED6DD92A5, xmp.iid:67EE84A6837EE111A214DD58CBE7F95D, xmp.iid:68EE84A6837EE111A214DD58CBE7F95D, xmp.iid:6BEE84A6837EE111A214DD58CBE7F95D, xmp.iid:B3A12E9B7E94E11188A2D35233EC43EA, xmp.iid:64300DD00F96E111B71EE047BF94C11A, xmp.iid:65300DD00F96E111B71EE047BF94C11A, xmp.iid:F6D19B652699E111A6B1EFE1DCBA00DB, xmp.iid:F7D19B652699E111A6B1EFE1DCBA00DB, xmp.iid:047580E1EA99E111889CB571C34852CE, xmp.iid:DE330315C49EE111BE6DC994F4E19A74, xmp.iid:5E17A1B7D09EE111BE6DC994F4E19A74, xmp.iid:5F17A1B7D09EE111BE6DC994F4E19A74, xmp.iid:4D514DEE25A5E111B4F9EDA4771B94E6, xmp.iid:4E514DEE25A5E111B4F9EDA4771B94E6, xmp.iid:50514DEE25A5E111B4F9EDA4771B94E6, xmp.iid:82BD7BD189AEE111AABF971502563FA5, xmp.iid:84BD7BD189AEE111AABF971502563FA5, xmp.iid:8CF11FD4AB64E2118E6FFF2AB2186C54, xmp.iid:8DF11FD4AB64E2118E6FFF2AB2186C54, xmp.iid:31B1EE96AC64E2118E6FFF2AB2186C54
History When                    : 2012:03:05 12:09:34-07:00, 2012:03:05 12:18:12-07:00, 2012:03:05 12:18:12-07:00, 2012:03:05 12:31:08-07:00, 2012:03:05 12:36:08-07:00, 2012:03:05 12:37:35-07:00, 2012:03:05 12:38:31-07:00, 2012:03:05 12:41:50-07:00, 2012:03:07 15:13:27-07:00, 2012:03:07 15:25:42-07:00, 2012:03:07 15:41:45-07:00, 2012:03:07 15:52:49-07:00, 2012:03:07 16:16:16-07:00, 2012:03:07 16:32:41-07:00, 2012:03:07 16:39:40-07:00, 2012:03:07 16:51:29-07:00, 2012:03:07 16:52:31-07:00, 2012:03:07 17:26:36-07:00, 2012:03:07 17:27:06-07:00, 2012:03:07 17:45:50-07:00, 2012:03:07 17:56:55-07:00, 2012:03:07 18:02:28-07:00, 2012:03:07 18:04:01-07:00, 2012:03:07 18:22:45-07:00, 2012:03:07 18:28:17-07:00, 2012:03:08 12:50:27-07:00, 2012:03:08 12:50:59-07:00, 2012:03:08 12:59:36-07:00, 2012:03:08 13:00:52-07:00, 2012:03:08 13:04:33-07:00, 2012:03:09 10:20:59-07:00, 2012:03:09 10:38:48-07:00, 2012:03:09 10:47:54-07:00, 2012:03:12 14:07:35-07:00, 2012:03:12 14:09:17-07:00, 2012:03:12 14:09:17-07:00, 2012:03:12 14:27:20-07:00, 2012:03:12 15:48-07:00, 2012:03:12 15:56:11-07:00, 2012:03:14 12:05:23-07:00, 2012:03:14 14:07:46-07:00, 2012:03:14 14:27:45-07:00, 2012:03:14 14:31:05-07:00, 2012:03:14 14:36:51-07:00, 2012:03:14 14:58:42-07:00, 2012:03:14 15:01:30-07:00, 2012:03:14 16:29:10-07:00, 2012:03:14 16:36-07:00, 2012:03:14 16:47:53-07:00, 2012:03:14 16:51:14-07:00, 2012:03:14 16:56:09-07:00, 2012:03:15 11:35:16-07:00, 2012:03:15 11:37-07:00, 2012:03:19 03:38:45-07:00, 2012:03:19 03:38:46-07:00, 2012:03:19 10:44:10-07:00, 2012:03:19 10:52:57-07:00, 2012:03:19 18:12:33-07:00, 2012:03:21 10:09:26-07:00, 2012:03:21 10:10:47-07:00, 2012:04:03 12:50:02-07:00, 2012:04:03 12:50:02-07:00, 2012:04:03 12:52:16-07:00, 2012:04:04 10:34:18-07:00, 2012:04:04 10:47:52-07:00, 2012:04:04 10:48:17-07:00, 2012:04:04 12:15:35-07:00, 2012:04:04 12:16:19-07:00, 2012:04:04 12:24:38-07:00, 2012:05:02 10:49:53-07:00, 2012:05:04 15:43:51-07:00, 2012:05:04 15:45:22-07:00, 2012:05:08 08:56:39-07:00, 2012:05:08 08:57:06-07:00, 2012:05:09 08:23:51-07:00, 2012:05:15 12:40:37-07:00, 2012:05:15 13:59:34-07:00, 2012:05:15 14:04:26-07:00, 2012:05:23 15:23:45-07:00, 2012:05:23 15:23:55-07:00, 2012:05:23 16:01:08-07:00, 2012:06:04 14:12:03-07:00, 2012:06:04 16:57:44-07:00, 2013:01:22 08:53:13-07:00, 2013:01:22 08:56:09-07:00, 2013:01:22 09:03:27-07:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:3966AC24672068118A6DD38B70A64686
Derived From Document ID        : xmp.did:03801174072068118A6DD38B70A64686
Derived From Original Document ID: xmp.did:F77F117407206811871FFE3D488AD683
Derived From Rendition Class    : default
Doc Change Count                : 6927
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 215.900000
Max Page Size H                 : 279.400000
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT
Font Family                     : Arial, Arial
Font Face                       : Regular, Bold
Font Type                       : Open Type, Open Type
Font Version                    : Version 5.20, Version 5.20
Font Composite                  : False, False
Font File Name                  : arial.ttf, arialbd.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Page Count                      : 18
Creator                         : Adobe InDesign CS5.5 (7.5.2)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AK5U-1300

Navigation menu