TAI CHIUN DEVELOPING MT-BT09 BLUETOOTH HEADSET User Manual
TAI CHIUN DEVELOPING CO.,LTD. BLUETOOTH HEADSET
USERS MANUAL
TM
1. Notice Before Using
2. Package Contents List
3. Product Introduction
4. Charging the Headset
5. Power On/Off
6. Pairing the Headsset with a Bluetooth Device
7. Wearing the Headset
8. Answering Calls
9. Refusing Calls
10. Ending Calls
11. Voice Dialing
12. Redialing
13. Mute
14. Transferring Calls
15. Maintaining Calls
16. Ending Call #1 and Answering Call #2
17. Conferece Calls
18. Adjusting the Volume
19. Safety Instructions
20. Specifications
21. Diagnosing Problems
22. Headset Storage
23. Q & A
24. Declaration of Conformity
25. Extreme Noise Cancellation
1. Notice Before Using
Thank you for purchasing the Motor Trend Bluetooth
Headset MT-BT09.please check the contents of this package
to verify the items listed in the Package Contents List below
has been included in your package.Be sure and read this User
Guide before you use the Headset.The MT-BT09 has been
developed using Bluetooth wireless technology and is capable
of connecting with Bluetooth devices designed with Audio
Gateway and PDAs .Desktop and notebook computers can be
connected and paired with the Headset using a USB Bluetooth
Dongle.Before using the Headset please verify your Bluetooth
Divice (phone,PDA) complies with Bluetooth V1.1/V1.2/
V2.0 and supports the Bluetooth Headset or Handsfree profile.
Index
2. Package Contents List
Please inspect this package and refer to the package contents
List below to verify all items were included in this package:
Item Name Quantity
Ø MT-BT09 Bluetooth Headset…………….1
Ø User Guide………………………………..1
Ø Warranty Card…………………………….1
Ø Travel Charger ………………………….1
INPUT: AC100-240V,50/60Hz,
OUTPUT
：
DC 5.1V,120mA
Ø Car Charger………………………………1
If you find any items were not included please contact your
retailer where You purchased this product.
3. Product Introduction
Function (Answering/Ending/On/Off) Button #3
LED Indicator Light
Receiver / Speaker
Microphone
Power Interface / Adapter for charging the Unit
Ear Hook
Decrease Volume key (-) 1
Increase Volume key(+)2
Note:
Before using the Headset for the first time,be sure and fully
Charge the unit at least 4 hours,preferably overnight (8-10
hours).
4．Charging the Headset
The MT-BT09 comes with a built in Lithium Polymer battery .You must charge the
battery fully before using the headset for first time.
Simply plug in provided USB cable to charging socket then to USB Car Charger
Adaptor/Notebook Computer/Desktop Computer. Headset will start charging. The red
indicator of headset will turn off.
a. Charge the headset until the red light on the headset turn off.
b. The headset will be full charged in approximately 1 house.
c. Remove the USB cable from the charging socket.
Note:
● For first time use, make sure to fully charge the Headset at least
4 hours,preferably overnight(8-10 hours).
● If Headset has not been used for more than 21 days,when
recharging it please charge unit at least 4 hours,preferably
overnight (8-10 hours) as the battery will need a full charge and
be aware the LED Indicator Light may take several hours to
show recharging is complete.
● While charging the unit, please do not use the Headset.
● Please use the original charger include with the Headset to
charge/recharge the unit.
● When the LED indicator Light flashes red during usage or while on
Standby,the battery is low and you should recharge the unit as
Soon as possible.
● Please recharge the Headset in room temperatures of no less than
+14℉(-10℃) to +113℉ (+45℃).
5. Power On/Off
a. To turn the unit on,Press and hold the function button for 2-3
seconds.the power Will turn on after the LED indicator Light
flashes the blue light 3 times.
b. To turn the unit off, press and hold the function button for
2-3 seconds until the red indicator Light flash 3 times.
Note:
● While turning the Headset on, you will hear a “Du Du” sound
from the receiver. The blue indicator light will flash 5 times,
then 2 times,and after repeating this for 5 cycles,the indicator light
will flash the blue light every 3 seconds until the unit adjusts
into Standby mode.
● While the Headset is turned on ,it will automatically search for
the paired device. Under the “ON” mode and within the effective
range of 30 feet from the Headset, the indicator will flash the
blue light to indicate that it entered the connecting mode.
● When turning the Headset off, you will hear one “Bi” sound followed
by two “Du” sounds, then the indicator will shut off after
flashing the red light a few times.
6. Pairing the Headset with a Bluetooth Device
Before you use the Headset the first time ,you must pair the unit with a
Bluetooth device i.e. cellular phone.To set up the pairing;
a. Insure your mobile phone is Bluetooth capable.
b. Make sure the Headset is turned off.
c. Press and hold the function button for 5 seconds until the
Indicator Light flashes alternation“Red –Blue – Red –
Blue”to enter the pairing mode.
d. On your mobile device start the Bluetooth search function.Refer
to the mobile device manufacturer’s instructions regarding
pairing the device to the MT-BT09 Bluetooth Headset.
e. When your mobile device is in the stage of searching a new
Bluetooth device, it should locate and pair with the MT-BT09.
f. On your mobile device,please choose and confirm the MT-BT09
as your Bluetooth paired device.
g. Key in the Headset Passcode- “0000”and press “YES”. If the
Pairing is successful, the indicator light on the Headset will
Flash the blue light only,For some mobile phones,after
pairing you may have to select and confirm MT-BT09
pairing each time you turn on the phone.Please read your
phone manufacturer’s instructions regarding Bluetooth
devices.
h. The Headset should now be in standby mode – ready to send and
receive calls.
Note:
If the pairing is not successful the first time, the Headset will return to
The Standby mode, please repeat the pairing process and refer to the mobile
Devece’s manufacturer’s instructions for additional information.
a. While pairing, it is better to keep the distance between the
Mobile device and the Headset to approximately 3 inches to 1
foot and make sure no metal objects are between them.
b. While pairing the Headset with other Bluetooth device, when
the device asks for the Passcode, key in “0000”- the Headset
passcode.For more details,refer to the mobile device’s
manufacturer’s instructions for additional information.
c. Should one of the following occur,the paired devices should
remain paired:
1. The power for or of the devices is off.
2. The service for one of the devices is off.
3. One of the devices is re-switched on.
7. Wearing the Headset
According to your preference, adjust the headset on your left
or right ear.
8. Answering Calls
a. When a call is received, wait until you hear the ringing
from your Headset receiver to press the Function button to
answer the call.
b. if the mobile device is ringing first, wait until the Headset is
ringing, then press the Function button.
c. While answering the calls, the blue Indicator light flashes 4
times each second.
d. If the mobile device is ringing and your Headset is off,turn the
Headset on first, then press the Function button to answer the
call.
e. If your mobile device has“automatic answer”feature and it
already set up to answer using this function,while the call is
coming in,your Headset can receive the call automatically
without Pressing the function button.
Note:
● For some mobile phones, the ringing sound of the Headset may be
the same as the ringing sound of the phone i.e.Nokia.
● For some mobile phones, the ringing sound of the Headset is
different than the phone i.e.Motorola.
9. Refusing calls
To refuse a call,wait to hear from your receiver, then press and hold
the function button for 2-3 seconds until you hear the “Du”sound to
refuse the call.If you have the mobile device set to automatically
answer calls,refusing call as described here will not apply.
10. Ending Calls
a. When the call is complete, press the function button to end the
call.
b. You can also wait until your caller hangs up and the call will be
disconnected automatically.
11. Voice dialing
a. If your mobile phone supports voice dialing ,you can use this
function with your Headset also.
b. Under the standby or connecting mode, press the Function Button
on the Headset and follow the mobile devices’s manufacturer’s
instructions to proceed with Voice Dialing.
Note:
● The activation of Voice Dialing will depend on the design of your
mobile device.
● The working range of the Bluetooth Headset is approximately 15
feet indoors and 15 – 30 feet outdoors.
12. Redialing
a. If your mobile device supports the Redialing feature, you can
also use this function with your Headset.
b. Under the Standby or Connecting mode, press the Decrease
Volume key(-) of the Headset for 2-3 seconds until you
Hear the “Du” sound to redial the last call.
13. Mute
a. During a phone conversation, press the Decrease Volume Key
(-) and Increase Volume Key(+) at the same time until you
hear the“Du” sound to begin the Mute function of the
Headset.
b. While in Mute mode ,you will hear an intermittent“DU”soud.
c. To cancel the Mute mode,press either Decrease Volume Key
(-)or the Increase Volume Key(+)to end this function.
14. Transferring Calls
a. When you are answering a call with the Headset, press the
Increase Volume Key(+) for 2-3 seconds until you hear one
“Du” sound, then the call will be transferred to the mobile
device.
b. When answering a call with the mobile device, press The
Function button on the mobile device to transfer the call to
the Headset. For some mobile devices, the devices LCD will
show the transferring sign.
Note:
To activate this function, your mobile device must support the
Handsfree mode. For more details, please check your mobile device’s
manufacturer’s instructions for additional information.
15. Maintaining calls
a. When you are answering a call with the Headset, press the
Decrease volume key(-) for 2-3 seconds until you hear one
“Du” sound, then the call will be maintained. If there is an
Incoming call during the initial call,the Headset will answer
it automatically.
b. Press the Decrease volume key(-)for 2-3 seconds until you
Hear one “Du” sound to end the Maintaining Call function.
c. You can also do this to renew the call.
Note:
● To activate this function, please make sure your wireless carrier
provides this service.
● To activate this function, please refer to the instructions of your
mobile device’s manufacturer’s instructions for additional
information and to verify this function is supported.
16. Ending Call #1 and Answering Call #2
While you are answering Call #1 from your Headset, you will be
alerted to the 2nd incoming call by a“Du Du” sound.To answer Call
#2,press and hold the Decrease volume Key(-) for 2-3 seconds until
you hear one “Du” sound followed by the music, Call #1 will be ended
and Call #2 will be answered automatically.
Note:
● To activate this function, please make sure your wireless carrier
provides this service.
● To activate this function, please refer to the instructions of your
mobile device’s manufacturer’s instructions for additional
information and to verify this function is supported .
17. Conference Calls
a. To establish a conference from the Headset,after answering Call#1,
you will hear the“Du Du”sound to alert you to incoming Call
#2,Press the Decrease Volume Key(-) for 2-3 seconds until you
you hear one “Du” sound, Call #1 will be maintained and Call #2 will
be answered automatically.
b. To Conference the calls,while you are answering Call #2,press the increase
volume key (+)for 2-3 seconds until you hear one
“Du” sound, Call #1 will be renewed and you and the 2 callers
can then talk together.
Note:
● To activate this function, please make sure your wireless carrier
provides this service.
● To activate this function, please refer to the instructions of your
mobile device’s manufacturer’s instructions for additional
information and to verify this function is supported.
● Be aware ,while in Conference mode,you will not be able to
disengage and continue the call with either Call #1 or Call #2
alone
● When the Conference Calling mode has not been activated,you can
press the Decrease Volume Key(-)for 2-3 seconds to toggle
between the 2 calls individually.
● If Call #1 is maintained and Call #2 is also on the line, quickly press
the Function button on the Headset to end Call #2 and return to
Call #1.
18. Adjusting the Volume
During a call, you may adjust the Headset’s volume
a. To increase the volume, press the Increase Volume Key(+).
b. To decrease the volume, press the Decrease Volume Key(-).
Note:
You will hear the “Du Du” sound while adjusting the volume to the
highest and lowest settings.
19. Safety Instructions
a. Read the Headset manual carefully and use the headset
correctly at all time by following the instructions.
b. THIS IS NOT A TOY .Keep the Headset away from
children and avoid children chewing on the Headset
or it’s components or accidentally swallowing any
pieces.
c. To clean the Headset,wipe it with a soft,dry static-free
cleaning cloth.
d. NEVER use cleaning liquids,solvents,or sprays to clean
the Headset.
e. Do not clean the Headset while charging.
f. Do not dissemble the Headset,If you encounter any
problems,contact the retailer immediately.
URGENT HANDLING
● If you enconter a problem, turn the Headset off
immediately.
● If the inside component(s) break, please contact the retailer
for a repair Center and instructions for immediate service
and support.
20.Specification
Product Model NO. MT-BT09
Standard Convention/Signal Output Bluetooth V2.0,Class Ⅱ
Frequency Band 2.4GHz-2.4835GHz,ISM Band
Talk/Standby Time Up to 8 hours / Up to 250 hours
Supporting Profile Headset & Handsfree
Connection Peer to Peer
Data Encryption 128 bits encrypted
Power Capacity Rechargeable Li- Polymer
Power Supply 5V DC, 100-240V AC adapter
Operation Temperature -10 - 55℃
Facility Saving Temperature -20 – 60℃
Operation Moisture 10% - 90%(non-concrete status)
Weight 41 g (battery included)
Size 150x140x47mm
Safety Regulation CE,FCC,BQB
21. Diagnosing Problems
a. If the Headset LED Indicator Light is flashing red – the battery is
low and recharge the unit immediately.
b. If,after recharging for 20 minutes, the Headset does not turn
on: For initial use, the power will be on after charging the
Headset at least for 40 minutes.The manufacturer’s recommended initial
charging time is no less than 4 hours,preferably overnight
(8-10 hours).
c. If the Headset does not show the recharging sign: The battery is
completely depleted or the Headset has not been used for 21
days, when charging, the red indicator light will be lit after a
few minutes.
d. You hear no sound coming from the Headset:
★ Make sure the Headset is turn on.
★ Make sure the Headset has been paired with a Bluetooth
enabled device.
★ Make sure the distance between the Headset and the paired
Bluetooth device is no more than 30 feet.
★ Make sure the mobile device has a strong signal as indicated
. by the mobile devices LCD screen icon.
★ Some Bluetooth mobile phones support only one Headset.
In this case,if you pair the MT-BT09 Headset with the
Deivce,the other Bluetooth Headsets may be deactivated.
Likewise,if you pair other Bluetooth headsets with this type
of mobile device,the MT-BT09 Headset may become
deactivated.
22. Headset Storage
Ø Use of accessories other than the manufacturer’s originally
supplied accessories may cause the Headset to malfunction or
fail,In addition,product damage,electrical conflicts with
non-manufacturer chargers may occur resulting in the
cancellation of the product warranty.
Ø Do not disassemble the Headset for any reason,This may damage
The Headset accidentally and void the manufacturer’s warranty.
Ø Please store the Headset away from dust,heat and areas where it
might accidentally fall or other damage may occur.
Ø Use a clean,soft static-free cloth to clean the Headset’s surfaces.
Ø You can put the Headset in a pocket while not in use.
Ø Do not let children play with the Headset as it may cause damage
to the unit and avoid any danger to young children.
Ø Avoid storing the Headset and chargers in extreme temperatures.
Travel Charger
1. The Travel Charger is designed for indoor use and not to be used
outdoors.
2. Connect the Travel Charger with the appropriate power supply.
3. Do not unplug the Travel Charger from the electrical outlet by the
Cord.Use the wall plug to pull the charger from the electrical
Outlet.
Battery
1. New battery:For first time use ,charge the battery at least 4 hours,
Preferably overnight(8-10 hours).
2. Only manufacturer authorized personnel can perform battery
replacement.
3. Under normal usage,the built in battery should be viable for up to
24 months or longer depending on usage.
4. The battery must be recharged in room temperatures of no less than
+14℉(-10℃) to +113℉ (+45℃) to remain under warranty and
to maximize the life of the battery.
5. Using the Headset in normal room temperatures enables the battery
to maximize its life.
6. When used in colder weather,the Headset’s battery life may
decrease.
7. Recharge the Headset at least every two months whether it is used
Or not.
23. Q & A
Q: Why does the fully charged headset under the “ON”mode not work
with my Bluetooth mobile device?
A: You must activate the Bluetooth function of the mobile device and
complete the device pairing process between the device and the
Headset.
Q: Can the MT-BT09 work with any mobile device?
A: No,only Bluetooth enabled mobile devices and phones.
Q: How far is the working distance between the Headset and the mobile
Device?
A: The MT-BT09 is certified by BQB, is compatible and compliant with
Bluetooth V2.0,ClassⅡ，the longest working distance between
the devices is 30 feet.please be aware,this distance may be
effected by interference with surrounding i.e.metal surfaces and
the capability of the Bluetooth mobile device(s)that the Headset
is paired with.
Q: Why does my Bluetooth mobile device find many Bluetooth devices
While searching for the new Bluetooth Headset?
A: Most of today’s mobile phones allow for more than one Bluetooth
device within a given (working)range.When searching for a new
device i.e.Headset,the mobile device or phone’s LCD shoule
recognize and display the MT-BT09 or some“Unknowm Device”.
Please select and confirm the MT-BT09.
Q: Why can’t my mobile device ot phone find the MT-BT09?
A: Check to make sure you are in “pairing”mode on the mobile device
or phone.If in this mode and still unable to locate the Headset,
please refer to your mobile device’s manufacturer’s instructions
for additional information.
Q: Must I pair the Headset every time I use it?
A: No. The paired devices should remain paired regardless of turning
the power off,reopening the devices or charging the respective
devices’batteries.
Q: Why is the voice from the Headset not clear?
A: Possibly for one or both of the following reasons:
1. Your location has an insufficient signal.you must move to a
Better signal area or location.
2. The working range between the Headset and the mobile phone
Has been exceeded.Please make sure the headset and mobile
Phone are within the working range of 30 feet and there is no
Obvious interfering factors between them.
Q: What can I do if the voice from the Headset is not clear?
A: Make sure your mobile phone is in a location with a better
Signal and increase the volume of the phone or Headset.
Q: Why is the Headset suddenly not working?
A: (1) The Headset battery may need recharging.When the battery is
Low,the Headset flashes the red Indicator Light,please recharge
It as soon as possible.
(2) The Bluetooth function of your mobile device or phone
“crashes”.To renew this feature,turn off the Bluetooth
function on the phone,turn it back on and “re-pair”it with the
Headset,You may need to perform this more than once to
Re-sync the device with the Headset after this type of
interruption.
Q: Why is the voice Dialing function of the Headset not switched on?
A: (1) You may need to re-record the “voice tag”.
(2) Some mobile device devices and phones do not support the Voice
Dialing feature.Please refer to your mobile device’s
manufacture’s instructions for additional information.
24. Declaration of Conformity
The MT-BT09 is FCC certified and complies with Part 15 of the FCC
rules,It is built from new housing,extended from HCB08.
European CD 0678:
The MT-BT09 has been manufactured in accordance with the European
R&TTE directive.It complies with the European Low Voltage
Directive 73/72/EEC and the European EMC Directive 89/336/EEC.
BQB Qualification:
The MT-BT09 Bluetooth Headset,a BQB Qualified Bluetooth product
is listed as qualified End Product in accordance to Section 6.2.4 of the
PRD.
25.Extreme Noise Cancellation
Physical Layer Hardware Engine DSP
Access code correlation
Audio transcoding
Digital enhancements have been made to the chip mono coder decoder
to reduce wind noise.
LEGAL NOTICE:Powermate,Inc.is an authorized licensee of Motor
Trend
™
Magazine.Motor Trend is a trademark of PRIMEDIA Specialty
Group,Inc.and is used with permission. 2007 PRIMEDIA Specialty
Group,Inc.all rights reserved.
Powercam Inc.- 1987-2007 all rights reserved,U.S.& International
patens,trademarks,copyrights and registrations issued and pending.
NOTES
FCC Information
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received; including interference that may cause undesired operation.
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user authority to operate the
equipment.
Tested to comply with FCC standard. FOR HOME OR OFFICE USE.
Warning :
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. & This device and its antenna(s) must not be
co-located or conjunction with any other antenna or transmitter.