TCL Technoly Electronics BD00004 Blu-ray Disc Player User Manual
TCL Technoly Electronics (Huizhou) Co., Ltd. Blu-ray Disc Player
Contents
- 1. VBR140_User manual_Part1_REV1
- 2. VBR140_User manual_Part2_REV1
- 3. VBR140_Quick Start Guide
VBR140_User manual_Part1_REV1
4, -w J . BLQ RAYTM PLAYER WITH WIRELESS INTERNET APPS VBR140 USER MANUAL . r I] ENERGY STAR This product qualifies for ENERGY STAR in the “iaclury default" setting and this is the setting in which power savings will be achieved Changing the factory delault picture settings or enabling olner features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating Important Safety Instructions Your BIu-ray Player is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your BIu-ray Player from being damaged, the following instructions should be observed for the installation, use, and maintenance of your BIu-ray Player. Read the following safety instructions before operating your BIu-ray Player. Keep these instructions in a safe place for future reference. To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your BIu-ray Player. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus Gncluding amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified bythemanufacturer, or sold with theapparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injuiy from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. Unplug the power cord before cleaning your BIu-ray Player. When moving your BIu-ray Player from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your EIu-ray Player to avoid causing fire, electric shock, or component damage. A distance of at least three feet should be maintained between your BIu-ray Player and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your BIu-ray Player close to smoke. Operating your BIu-ray Player close to smoke or moisture may cause fire or electric shock. Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your BIu-ray Player and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your BIu-ray Player in a bookcase or cabinet unless proper ventilation is provided. Never push any object into the slots and openings on your BIu-ray Player cabinet. Do not place any objects on the top of your BIu-ray Player. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your BIu-ray Player. Your BIu-ray Player should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home, consult your dealer or local power company. Do not apply pressure orthrow objects at your BIu-ray Player. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer. When connected to a power outlet, power is always flowing into your BIu-ray Player. To totally disconnect power, unplug the power cord. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your BIu-ray Player that may be of sufficient magnitude to constitute a risk of electric shock to persons Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket should be installed near your BIu-ray Player and easily accessible. Only power of the marked voltage can be used for your BIu-ray Player. Any other voltage than the specified voltage may cause fire or electric shock Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms. Unplug your BIu-ray Player during a lightning storm or when it will not be used for long period of time This will protect your BIu-ray Player from damage dueto power surges. Do not attempt to repair or service your BIu-ray Player yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel. WARNING: Keep your BIu-ray Player away from moisture. Do not expose your BIu-ray Player to rain or moisture. If water penetrates into your BIu-ray Player, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock. Do not use your BIu-ray Player if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repairyour BIu-ray Player yourself. Avoid using dropped or damaged appliances. If your BIu-ray Playe' is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair Continued use of your BIu-ray Player may cause fire or electric shock. Do not install your BIu-ray Player in an area with heavy dust or high humidity. Operating your BIu-ray Player in environments with heavy dust or high humidity may cause fire or electric shock. Follow instructions for moving your BIu-ray Player. Ensure that the power cord and any other cables are unplugged before movmg your BIu-ray Player. When unplugging your BIu-ray Player, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your BIu-ray Player will not be used for an extended period of time, unplug the power cord. To reduce risk of electric shock, do not touch the connector with wet hands. Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like. If any of the following occurs contact the dealer: - The power cord fails or frays. - Liquid sprays or any object drops into your BIu-ray Player. - Your BIu-ray Player is exposed to rain or other moisture - Your BIu-ray Player is dropped or damaged in any way. - The performance of your BIu-ray Player changes substantially. This apparatus shall not be exposed to dripping or splashing and no objects fill with liquids, such as vases, shall be placed on the apparatus. The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. The Iightningflash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. Caution This BD player has a laser system. Please note that hazardous radiation leakage may be caused if the player is misused in anyway. Do not defeat the safety interlocks. Do not open the case of the player. The laser light will become V|sibIe when the case is opened CLASS 1 Laser Product Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Important Safety Information forViewing 3D Content You may experience discomfor1 while watching 3D content. You may feel symptoms of eye strain, Vision fatigue, color or depth distortion, motion sickness, nausea, dizziness, disorientation, or other discomforts. If you experience any of these symptoms, stop watching and take a break for at least thirty minutes before resuming If the symptoms are severe or continue even after you have stopped watching 3D content, consult a physician. Take care to monitor children ‘s watching of 3D content. Children Gncluding teenagers) may be more at risk of experiencing discomfort while watching 3D content and less likely to report symptoms. Monitor children’s 3D content viewing and watch for signs of discomfort. Some Viewers may be susceptible to epileptic seizures or strokes when viewing 3D images, even if those conditions have not been previously diagnosed. If you or anyone in your family has a history of seizures or strokes, or if you have any other reason to think you or someone under your supervision may be susceptible to epileptic seizures or strokes, consult a physician before watching 3D content Even if you do not experience any of the above symptions, take regular breaks from watching 3D content. Before the first-time setup, take a few moments to familiarize yoursetf with the Rear Pane] various controls and connections. This will make the setup process much faster and your experience with the player much more enjoyable! Front Panel [ml Sin]. Um, Luann-l |’l.|'/"|’r||rs<' 1mm list; rnmm-zr 'I|>l|\;:|| hum.” Anlnmm Ann” nul Front Panel norm lmtlxlill I\||\I|u um Disc Drawer: Insert the disc hereto a . _ pl y _ Rear Panel Eject: Press to open or close the drsc drawer. Play/Pause: Press ‘0 play 0" pause dlSC- PowerCord: Connect to an electrical outlet. 5‘0P= Press to Stop disc playback. Ethemer. Connect to your router or modern with an Power/Standby: Touch to turn the player on/off, ethernet cable, USB: Connect USE thumb drive to play music or HDMI: Connect to yourTV or home audio system with photos. an HDMI cable. Wi-Fi Antenna: When communicating with a home network, the orange light flashes. Do not attempt to disconnect or otherwise tamper with the Vlfi-Fi Antenna. Optical Digital Connect to a home audio system with an optical Audio Out: (SPDIF) cable. Coaxial Audo Out: Connect to a home audio system with a coaxial (RCA) cable. Open/Close Play Prein oue Pew: ncl Setup Stop OK Helm n V Button PIP Info TV Res: Search A-B Power App Launcher Next Play/Fame Fast Forward DlS( Menu Arrow Popupr’Tltle Menu App Shortcuts VlZlO TV Volume Audio Angle Cancel Repeat Battery Compartment Remote - Front Remote Control Open/Close: Open or close the disc drawer. Power: App Launchers: Previous: Play/Pause: Next: Rewind: Stop: Fast Forward: Setup: Disc Menu: 0K: Arrow: Retum: Popup/Titie Menu: App Shortcuts: V Button: Turn Player on or off. Quick launch App on button. Go to the previous chapter or track. Start or pause playback. Go to the next chapter or track. Reverse playback. Press repeatedly to increase speed. Stop playback. Advance playback. Press repeatedly to increase speed. Open setup menu. Open disc menu. Select highlighted menu item. Navigate menu. Go back to the previous menu screen. Open title menu while movie plays. Control Internet Apps and disc functions (press Red button to exit Apps), Return to the Player home screen. VIZ|0 TV Volume: Increase. decrease, or mute volume on e VIZIO TV. PIP: Info: Enable picture-in-picturef Open disc info window. Subtitle: Change subtitle trackf Au dio: TV R as: Angl e: Repeat: A-B: Search: Cancel: QWERTY Keypad: Change audio trackf Change the |eso|ufion output of the Player to match the resolution of your TV. Select viewing anglef Repeat playback of track* Create a playback Ioop* Find specific title, chapter, or time.x Clear entered numbers/letters. Use to enter numbers and letters. Hold down the ALT button to type a blue letter, number, or symbol. ‘Compatible Blu-ray or DVD discs only. [ IMPORTANT: Do not cover this area.This is the transmitter. J QWERTY Keypad App Shortcuts Remote — Back Replacing the Batteries 1. Remove the battery cover by pressing gently on the remote and pushing the cover away as shown. 2. Insert two AAA batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment 3. Replace the battery cover. ~ Use only good quality batteries. ~ Inserting the batteries incorrectly may result in cracking or leakage that may cause a fire or result in injuiy. ~ Dispose of old or dead batteries in accordance with local hazardous waste regulations. ~ Keep batteries away from children and pets. Inspecting the Package Contents Before installing your new player, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. When you have completed your inspection install the player. Bin—lav Player Humutfi with [minim Olluzk btzu I [étlllle Package Contents Connecting the Player to an EIectricai Outlet Your player must be connected to a power source in order to work. Connect the power cord to an electrical outlet as shown below‘ Connecting Power Cord Connecting the Player to Your TV Your BIu-ray playeris easily connected to yourTV. Before you begin theinstallation, ensure yourTV has an available HDMI port. HDMI Cable Connecting the BIu-ray To connect the player to the TV: Ensure both the TV and the player are off. 2. Connect the player and the TV using an HDMI cable (sold separately). Ensure each end of the cable is securely connected. 3. Turn the TV on. 4. Turn the player on by pressing the Power button on the remote, or by touching the Power control on the front of the player. 5. When you are ready to use the player, set the TVs input to the proper HDMI input. (Devices differ; see your TV’s user manual for details on how to change the input source.) Connecting the Player to Your Home Audio System 3. Your player has two digital audio ports: coaxial and optical. If your home audio system is equipped with one of these ports, you can connect it to your player so you can enjoy theater-style surround sound. 4. 5. Rememb You still need to connect the player to your teIeV|s|on to view deo. See Connecting the Player to YourTVon page 4. To connect the player to your home audio system: 1. Ensure both your home audio system and the player are off. 2. Connect the player to the home audio system. Use the best available connection. See the Home Audio Connection Chart below. OPTICAL Better Sound E Up to 5.1 Channels Coaxial (‘RtAl Cable Upliual isi‘DlF) viable Turn the player on by pressing the Power button on the remote, or by touching the Power control on the front of the player. Turn your home audio system on. When you are ready to use the player, set your home audio systems input to the player’s connection. (Devices differ; see your audio systems user manual for details on how to change the input.) If the player is correctly connected, you will hear audio from your home audio system speakers when a disc is played. uality sound, connect your player to yo r hom audio system u ng an HDMI cable. See the next page for @ OPTICAL in’JAXlAL e =_—1= 0 COAXIAL Home Audio Connection Chart Connecting the Player to Your TV and Home Audio System with HDMI Your player can output high-definition digital audio via the HDMI port, enabling you enjoy up of 7.1 channels of surround sound using yourhome audio system. To connect the player to your home audio system with HDMI: 1. Ensure both your home audio system and the player are off. 2. Connect the player to the home audio system and TV as shown in the the HDMI Connection Chart below. 3. Turn the player on by pressing the Power button on the remote, or by touching the Power control on the front of the player. 4. Turn your TV and home audio system on. 5. When you are ready to use the player, set your home audio systems input to the player’s connection. Set your TV’s input to the proper HDMI connection. Home Audio Receiver VIZIO BIu-ray Player lellr Best Sound HDMI and Video Up to 7.1 Channels HDMI IN HDMI Connection Chart Setting Up Your Network Connection Connecting to AWired Network To connect to awired network: Your player is network-ready, and can be connected to your home network using the FtJ45 (ethernet) connector on the back panel 1. Ensure you have: 0 An ethernet cable long enough to connect the player to your router or modem Once you have connected to your home network and the Internet, you can use Internet Apps to deliver popular online content to your player. 0 A router or modem with an available ethernet port For the most reliable network performance, a wired connection is . Ahigh-speed internet connection recommended. 2. Connect your ethernet cable to the router and to the ethernet port on the back of the T\/. Ethernet cables are available from many retailers in lengths of up to 50 feet 3. Turn on the player and your TV. The player detects the ethernet connection. Router / Modem ViZIO Btu-ray Player |_|_u Ethernet Cable Setting Up Your Network Connection Connecting to a Wireless Network & Be sure there is no Ethernet cable connected to the BIu-ray Player. To connect to a wireless network: 1. Ensure you have: 0 A router broadcasting a high-speed wireless signal (802.11n recommended) 0 A high-speed internet connection Press the Power button on the remote to turn the player on. Turn the TV on and and select the input to which the BIu-ray player is connected. Use the Left/Right Arrow buttons on the remote to highlight Settings. then press OK. Use the Left/Right Arrow buttons on the remote to highlight Network. A drop-down menu appears. Use the UpIDown Arrow buttons on the remote to highlight Wireless, then press OK. Use the UpIDown Allow buttons on the remote to highlight Network List, then press OK. The Network List window is displayed. Highlight your network name, then press OK. If your network is password-protected, enter your password using the buttons on the remote, then select Done. When finished, highlight Connect and press OK. Yourplayer is connected to the network. Connecting to a Wireless Network with WiFi Protected Setup (WPS) & Be sure there is no Ethernet cable connected to the BIu-ray Player. Wi-Fi Protected Setup is an easy way to connect the Player to your home wireless network. To connect using WPS: 1. Ensure you have: 0 A router with a WPS button, broadcasting a high-speed wireless signal (802.11n recommended) 0 A high-speed internet connection Press the Power button on the remote to turn the player on. Turn the TV on and and select the input to which the BIu-ray player is connected Use the Left/Right Arrow buttons on the remote to highlight Settings, then press OK. Use the Left/Right Arrow buttons on the remote to highlight Network. A drop-down menu appears. Use the UpIDown Anow buttons on the remote to highlight Wireless, then press OK. Use the UpIDown Arrow buttons on the remote to highlight WiFi Protected Setup (WPS), then press OK. Press the WiFi Protected Setup button on your router. The Player is detected and connected to your home network. In this chapter. you will learn how to: P|aying 3 Disc 0 Navigate the On-Screen Menu u Pla 3 Disc Your player can play several kinds of discs. Use this table to ensure your disc is y compatible with the player: 0 View USB Media Type of Disc Logo Navigating the On—Screen Menu ‘JlZ’C Use Arrow and 0K Buttons On—Screen Menu To highlight an icon or menu setting. press the Arrow buttons on the remote. The highlighted icon or menu setting will glow light blue. To select an icon or menu setting, highlight the icon or menu setting and press OK button on the remote. To go back to a previous screen, press the RETURN button. To play a disc: 1. 10 Press the Eject button on the remote or touch the Eject control on the front of the player. The disc tray opens. Insert your disc Place the disc, label side up. into the disc tray. Press the Eject button on the remote or touch the Eject control on the front of the player. The disc tray closes. Using the Arrow buttons on the remote, highlight Play Disc and press SELECT. The disc plays. Basic Playback Functions When playing a disc, you can use buttons on the remote to manipulate the playback in several ways: I"I awl‘ul ise Pl evmn |s ‘ ’ Next Revulnrl 4 ' Fasl liulwal d sum Bas|c Playback Buttons Previous: Skip to last chapter or track. Next: Skip to next chapter or track. Rewind: Reverse playback. Press repeatedly to increase the speed. Speeds are x2, x4, x8, x16, x32, x64, and x128. Press Play! Pause to resume normal playback Play/Pause: Pause playback. Press again to resume normal playback. Fast Forward: Increase speed of playback. Press repeatedly to increase the speed. Speeds are x2, x4, x8, x16, x32, x64, and x128. Press Play/Pause to resume normal playback. Stop: Halt playback Your player can access special content from discs that support BD-Live. This special content varies, but sometimes includes games, movie trailers, and director commentaries. Advanced Playback Functions Viewing BD_|_ive Content Your player also features advanced playback functions. To use BD-Live, you need: Sill'mld 0 A working internet connection. See Setting Up Your Network Audio Connection on page 7. - A BIu-ray disc that contains BD-Live content. Repeal ° A USB thumb drive with 1GB of available memory connected to the player's USB port. A—IS For more details on viewing BD-Live content. see Changing the BD-Live Settings on page 21. Advanced piayback Viewing USB Media - Video and Audio Your player features a USB port where you can connect and share a USBthumb PIP: Enable pictui'e-in-picture (Supported discs only.) drive containing your photos and music Info: Display the Info Bar. Press again to close the Info Bar. TV Res: Change the output resolution. Press repeatedly to cycle The player sUPPOrte the following file Wines: through available resolutions. Angle: Some video discs are recorded using multiple camera Madla Type Flle Types angles. Press to change viewing angle. (Supported discs l .' . _ on y) . _ _ Audio mp3 Subtitle: Open subtitle menu. Press again to close. See Changing the 330 Subtitle Language on page 20. (Supported discs only.) Audio: Open audio menu. Press again to close. See Adjusting the _ Audio Settings on page 17. (Supported discs only.) Images JPEQ .png of the desired segment, and again at the end. Segmem will A-B: Loop a segment of audio or Video. Press at the beginring loop until the REPEAT button is pressed. (Supported discs only.) Repeat: Change repeat mode (Supported discs only): ' All - Repeat all tracks in order. Random - Repeat all tracks randomly ' Track - Repeat the currently playing track. - Off — Resume normal playback. 11 Playing USB Photos and Audio 3. Use the Arrow buttons on the remote To play USB media. you must first save your music or images onto a USB thumb “J hlghlrght Medra. then press (Mm SELECT. Remember: 0 The USB thumb drive must be formatted as FAT32. - Files on the USB thumb drive must end in a supported file extension amps. rpg. etc). 0 The player will not play media from external hard drives or mp3 players, 4' Use the UP, Down Arrow buttons to highlight the media type you want to To play your USB media: play. then press SELECT. 1. Turn the player off. Connect your USB thumb drive to the USB port on the front of the player. 5 Use the Arrow and SELECT buttons on the remote to locate your media file in the file browser Highlight the file and press SELECT. The media file begins to play. Do not remove the USB thumb drive while the player is on. Doing so may damage the drive. 2. Press the Power button on the remote or press the Power button on the front or the player to turn it on. 12 3. Press the Power button on the remote or press the Power button on the front of the player to turn it on. 4. Use the Arrow buttons on the remote to highlight Media, then press SELECT. 5. Use the Up/Down Arrow buttons to highlight Pictures, then press SELECT. 6. Use the Arrow and SELECT buttons on the remote to locate your photo folder in the file browser. Highlight Start Slide Show and press SELECT. The slide show begins to play. 14 UlZlC Adjusting the Slide Show Settings The slide show settings can be adjusted to make your presentations more exciting, To adjust the settings 1. Highlight Settings in the Pictures file browser screen and press SELECT. 2. Adjust the settings: 0 Slide Show Effects . Change the transition between slides. Choose from Horizontal Scroll, Fade, Shutter, and None - S ide Show Delay — This setting adjusts the amount of time each slide is displayed. Choose from 1. 2, 5. 10, 15, and 30 seconds. Ifyou want no delay between slides. choose No Delay. 3. When you have adjusted the settings, highlight 0K and press SELECT The Settings menu closes. 4. Start your slide show by highlighting Start Slide Show and press SELECT. Your player is preset to work with most setups out of the box, but if you would like to adjust any of the player’s settings, you can use the on-screen menu to do so. The Settings menu is divided into these parts: 0 Display 0 Audio 0 Lan guage 0 B D- Live ' Quick Setu p 0 Parental 0 System 0 Netvv ork 0 Info Adjusting the Display Settings From the Display menu, you can adjust the way the player displays your video. To access the Display menu: 1. Turn on the player and your TV. Use the Arrow buttons on the remote to highlight Settings and press OK. The Settings menu is displayed. 2. Use the Arrow buttons on the remote to highlight Display and press OK. The DispIay drop-down menu is displayed. Your current settings are displayed to the right of each menu option. Changing the Display Resolution For the best viewing experience, you should adjust the player’s settings so that it outputs video in a resolution supported by your TV. To change the display resolution: 1. From the Display menu, use the Up! Down Arrow buttons on the remote to highlight Resolution and press OK. fl. mom The Resolution menu is displayed. Using the Arrow buttons, highlight the highest resolutton your TV can display, then press OK. i“ If your TV is connected to the player using HDMI, select HDMI Auto. The player will detect the best dispIay resolution automatically. & If you choose a resolution unsupported by the your TV, you will see an error message. The resolution will revert to its previous setting. & Only HDMI connections can display 1080p video. Adjusting the Aspect Ratio If video displayed from the player appears distorted or otherwise incon’ect, you may need to adjust the aspect ratio of the player to match that of your TV. (Devices differ; see your TV’s user manual to determine its aspect ratio.) To adjust the aspect ratio: 1. From the Display menu, use the Up! Down Arrow buttons on the remote to highlight TV Aspect and press OK. Please (house 1 new TV Aspect. 16-9 WIij 3 The TV Aspect menu is displayed. 15:9 Mum" N7 41} Pan amt Scan 4:3 Letterbox 2. Highlight the aspect ratio that most I closely matches that of your TV and press OK: 0 16:9 Wide - Use this setting if you have a “widescreen" television. When using this setting, video formatted in 4:3 will be stretched horizontally to fit the screen. 0 16:9 Pillarbox - Use this setting if you have a “widescreen" television. When using this setting, video formatted in 4:3 will be displayed in the center of the screen. Vertical bars will be displayed on the left and right edges of the picture. 0 4:3 Pan and Scan - Use this setting if you have a “traditional” screen (nearly square). When using this setting, movies in widescreen fomat Wl|| be centered and the left and right edges of the picture may be cut off. 0 4:3 Letterbox - Use this setting if you have a “traditional" screen (nearly square). When using this setting, movies in widescreen fomat will be fully displayed, with black bars on the top and bottom of the picture. 16 Activating Film Mode Movies are recorded on film at a rate of 24 pictures, or frames, per second. Many of the movies on BIu-ray discs are formatted at this frame rate (24 frames/second). However, not all TVs l:an display this format. If the player is connected to your TVvia HDMI and is capable of displaying 24 frames/second, you can activate Film Mode for a better viewing experience To activate/deactivate Film Mode: 1. From the Display menu, use the Up! Down Arrow buttons on the remote to highlight Film Mode and press OK. mm mam .\ new film uueumpzm The F|Im Mode menu is displayed. 2. H|ghl|ght On or Off and press OK. Adjusting the Deep Color Setting The player is capable of outputting 36-bit color over HDMI. For the best viewing experience, the deep color setting should be adjusted to match your TVs display capabilities. To adjust the Deep Color setting: 1. From the Display menu, use the Up! Down Arrow buttons on the remote to highlight Deep Color and press OK. Please choose a new Deep (blur. v. an 3 The Deep Color menu is displayed. um Wide 2. Highlight the highest color setting that your TV can display. (Devices differ; see your TV’s user manual for details.)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2012:02:29 18:06:22+08:00 Create Date : 2012:02:29 18:06:19+08:00 Metadata Date : 2012:02:29 18:06:22+08:00 Creator Tool : Acrobat 编辑器 9.0 Format : application/pdf Title : 未标题 Document ID : uuid:70705bb7-ecf7-4b98-93d4-ef895d3f709b Instance ID : uuid:43e06f66-0ce6-4c7a-84b2-9c579ff312c1 Producer : Adobe Acrobat 9.5.0 Has XFA : No Page Count : 20 Creator : Acrobat 编辑器 9.0EXIF Metadata provided by EXIF.tools