TCL Technoly Electronics BDDMPBD87 BLU-RAY DISC PLAYER User Manual

TCL Technoly Electronics (Huizhou) Co., Ltd. BLU-RAY DISC PLAYER

UserManual.wiki >

TCL Technoly Electronics >

BDDMPBD87 User Manual >

DMP-BD87_User Manual_Part1

Contents

1. DMP-BD87_User Manual_Part1
2. DMP-BD87_User Manual_Part2

DMP-BD87_User Manual_Part1

VQT3V18Owner’s ManualBlu-ray DiscTM PlayerModel No. DMP-BD87DMP-BD77Dear customerThank you for purchasing this product.For optimum performance and safety, please read these instructions carefully.Please keep this manual for future reference.If you have any questions contactU.S.A. and Puerto Rico : 1-800-211-PANA(7262)Canada : 1-800-561-5505until 2012/01/5PPCDMP-BD87_77_VQT3V18_eng.book 1 ページ２０１１年１０月２４日　月曜日　午後２時４５分

2VQT3V18Getting startedIMPORTANT SAFETY INSTRUCTIONSRead these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11 Only use attachments/accessories specified by the manufacturer.12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13 Unplug this apparatus during lightning storms or when unused for long periods of time.14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.(Inside of product)The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.CAUTIONCAUTION : TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.NO USER-SERVICEABLE PARTSINSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.RISK OF ELECTRIC SHOCKDO NOT OPENTHE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:≥Reorient or relocate the receiving antenna.≥Increase the separation between the equipment and receiver.≥Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.≥Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Responsible Party:Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, NJ 07094Support Contact:Panasonic Consumer Electronics CompanyTelephone No.: 1-800-211-PANA (7262)DMP-BD87_77_VQT3V18_eng.book 2 ページ２０１１年１０月２４日　月曜日　午後２時４５分

3VQT3V18UnitTo reduce the risk of fire, electric shock or product damage,≥Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs.≥Do not expose this unit to rain, moisture, dripping or splashing.≥Do not place objects filled with liquids, such as vases, on this unit.≥Use only the recommended accessories.≥Do not remove covers.≥Do not repair this unit by yourself. Refer servicing to qualified service personnel.Unit≥This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.≥Do not place sources of naked flames, such as lighted candles, on this unit.PlacementTo reduce the risk of fire, electric shock or product damage,≥Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.≥Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.≥Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.BatteriesMishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.≥When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.≥Do not mix old and new batteries or different types at the same time.≥Do not heat or expose to flame.≥Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.≥Do not take apart or short circuit.≥Do not attempt to recharge alkaline or manganese batteries.≥Do not use batteries if the covering has been peeled off.Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.Table of contentsGetting startedIMPORTANT SAFETY INSTRUCTIONS. . . . 2Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 4Unit and media care. . . . . . . . . . . . . . . . . . . . 4Playable media . . . . . . . . . . . . . . . . . . . . . . . 5Control reference guide . . . . . . . . . . . . . . . . . 7Connections & SettingsSTEP 1 : Connecting to a TV. . . . . . . . . . . . . 8STEP 2 : Connecting to an amplifier/receiver. . . . . . . . . . . . . . . . . . . . . . 8STEP 3 : Connecting to the network . . . . . . . 9STEP 4 : Connecting to an AC power source. . . . . . . . . . . . . . . . . . . . . . 10STEP 5 : Settings . . . . . . . . . . . . . . . . . . . . 11PlaybackInserting or removing media . . . . . . . . . . . . 14HOME menu . . . . . . . . . . . . . . . . . . . . . . . . 14Multi-user mode . . . . . . . . . . . . . . . . . . . . . . 15Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Enjoying Network Service(Netflix, etc.) . . . . . . . . . . . . . . . . . . . . . . . 18DLNA feature . . . . . . . . . . . . . . . . . . . . . . . . 19VIERA LinkTM “HDAVI ControlTM” . . . . . . . . . . . . . . . . . . . 20SettingsOption menu . . . . . . . . . . . . . . . . . . . . . . . . 21Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . 23ReferenceTroubleshooting guide . . . . . . . . . . . . . . . . . 27Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 30Supplemental information . . . . . . . . . . . . . . 31Precautions of Wireless LAN connection. . . 32Specifications. . . . . . . . . . . . . . . . . . . . . . . . 33Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) 37Limited Warranty (Only for CANADA) . . . . . 38Referencia rápida en español (Spanish Quick Reference)[Para EE.UU. y Canadá] . . . . . . . . . . . . . . 39Index . . . . . . . . . . . . . . . . . . . . . . . Back coverWARNINGCAUTIONAbout descriptions in this Owner’s Manual≥Instructions for operations are generally described using the remote control.≥This Owner’s Manual is applicable to models DMP-BD87 and DMP-BD77. Unless otherwise indicated, illustrations in this Owner’s Manual are of DMP-BD87.[BD87] [BD77] : indicates features applicable to DMP-BD87 and DMP-BD77, respectively.About Firmware updates (>13)Getting startedConnections & SettingsPlaybackSettingsReferenceDMP-BD87_77_VQT3V18_eng.book 3 ページ２０１１年１０月２４日　月曜日　午後２時４５分

4VQT3V18AccessoriesCheck the supplied accessories before using this unit.1 Remote control (N2QAYB000734)2 Batteries for remote control≥Product numbers provided in this Owner’s Manual correct as of December 2011. These may be subject to change.∫Using the remote controlInsert so the poles (i and j) match those in the remote control.Point it at remote control signal sensor on this unit. (>7)Unit and media care∫Clean this unit with a soft, dry cloth≥Never use alcohol, paint thinner or benzine to clean this unit.≥Before using chemically treated cloth, carefully read the instructions that came with the cloth.∫This unit’s lens≥Use the lens cleaner (not supplied) to clean the unit’s lens.∫Clean discsWipe with a damp cloth and then wipe dry.∫Disc and card handling precautions≥Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.≥Do not attach labels or stickers to discs.≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.≥Clean any dust, water, or foreign matter from the terminals on the rear side of the card.≥Do not use the following discs:– Discs with exposed adhesive from removed stickers or labels (rented discs etc).– Discs that are badly warped or cracked.– Irregularly shaped discs, such as heart shapes.∫To dispose or transfer this unitThe unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (>27, “To return all settings to the factory preset.”)≥The operation history may be recorded in the memory of this unit.[For_Canada]The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.R6/LR6, AA(Alkaline or manganese batteries)DO DO NOTDMP-BD87_77_VQT3V18_eng.book 4 ページ２０１１年１０月２４日　月曜日　午後２時４５分

6VQT3V18∫Discs that cannot be played in this unitAny other disc that is not specifically supported or previously described.≥DVD-RAM≥Super Audio CD≥Photo CD≥DVD-Audio≥Video CD and Super Video CD≥WMA discs≥All types of DivX discs≥PAL discs≥HD DVD≥BD-Video discs recorded at a rate of 50 fields/sec∫Region management informationBD-VideoThis unit can play BD-Video discs supporting the region code “A”.DVD-VideoThis unit can play DVD-Video discs supporting the region number “1” or “ALL”.∫FinalizeDVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.∫BD-Video≥This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video.∫Music CD≥Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.≥The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.∫USB device≥This unit does not guarantee connection with all USB devices.≥This unit does not support USB device charging.≥[BD77] : When using Wireless LAN Adaptor DY-WL10, connect it to the rear terminal of this unit. (>9)≥FAT12, FAT16, FAT32 and NTFS file systems are supported.≥This unit supports USB 2.0 High Speed.≥This unit supports an HDD formatted in FAT32 and NTFS. If the HDD is not recognized the power to the HDD may not be supplied. Supply power from an external source.≥It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files were created.≥The producers of the disc can control how discs are played, so you may not always be able to control play as described in this Owner’s Manual. Read the disc’s instructions carefully.Example:241ALL1Example:DMP-BD87_77_VQT3V18_eng.book 6 ページ２０１１年１０月２４日　月曜日　午後２時４５分

7VQT3V18Control reference guide1 Turn the unit on and off2 TV operation buttonsYou can operate the Panasonic TV through the unit’s remote control. (Depending on the TV these buttons may not work.)[ÍTV POWER] : Turn the television on and off[AV] : Switch the input select[ijVOL] : Adjust the volume3 Select title numbers, etc./Enter numbers or characters4 Cancel5 Select audio (>16)6 Basic playback control buttons (>16)7 Show status messages (>17)8 Show Pop-up menu/Top menu (>17)9 Show Option menu (>21)10 Color buttons Used for various purposes depending on the display11 Transmit the remote control signal12 Open or close the disc tray (>14)13 Show NETFLIX screen14 Switch on/off Secondary Video (Picture-in-picture) (>22)15 Show Setup menu (>23)16 Exit the menu screen17 Show the selection screen of network features (>18)18 Show HOME menu (>14)19 [3,4,2,1] : Move the highlight for selection[OK] : Confirm the selection(;1) : Frame-by-frame (>16)20 Return to previous screen1POWER button (POWER Í/I) (>11)Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.2 Disc tray (>14)3 USB port (>14)4 Display (>31)5 Remote control signal sensorDistance: Within approx. 7 m (23 feet)Angle: Approx. 20e up and down, 30e left and right6 Stop (>16)7 Start play (>16)8 Open or close the disc tray (>14)Rear panel terminals (>8–9)12364578191092018161517141312111 82 3 4 6 75Getting startedDMP-BD87_77_VQT3V18_eng.book 7 ページ２０１１年１１月４日　金曜日　午前１０時４１分

9VQT3V18STEP 3 : Connecting to the networkThe following services can be used when this unit is connected to broadband.≥Firmware can be updated (>13)≥You can enjoy BD-Live (>17)≥You can enjoy Network Service (>18)≥You can access other devices (DLNA) (>19)For details about connection method, refer to the instructions supplied with the connected equipment.–[BD87] : This unit can be connected to a Wireless router wirelessly.–[BD77] : Connect the Wireless LAN Adaptor DY-WL5 (optional).≥For up to date compatibility information on your Wireless router refer tohttp://panasonic.jp/support/global/cs/(This site is in English only.)For additional information about this unit refer to http://www.panasonic.com/consumer/support (For U.S.A.)≥The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.≥Precautions of Wireless LAN connection (>32)≥[BD77]– Only the Wireless LAN Adaptor DY-WL5 (optional) can be used.– Read the operating instructions for the Wireless LAN Adaptor DY-WL5 (optional) thoroughly when using it.– To simultaneously connect the Wireless LAN Adaptor DY-WL5 (optional) and a LAN cable, use the extension cable supplied with the DY-WL5.≥Use category 5 or above straight LAN cables (STP) when connectiong to peripheral devices.≥Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.Wireless LAN connectionLAN cable connectionWireless router, etc. Internet[BD87][BD77]LAN CableInternetBroadband router, etc.Connections & SettingsDMP-BD87_77_VQT3V18_eng.book 9 ページ２０１１年１１月４日　金曜日　午前１０時４１分

10 VQT3V18STEP 4 : Connecting to an AC power source≥This unit consumes a small amount of AC power (>33) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.઒AC power supply cord (supplied)To a household AC outletDMP-BD87_77_VQT3V18_eng.book 10 ページ２０１１年１０月２４日　月曜日　午後２時４５分

11VQT3V18STEP 5 : SettingsAfter connecting your new player for the first time and pressing [Í], a screen for the basic settings will appear.PreparationTurn on the television and select the appropriate video input on the television.1Press [Í].Setup screen appears.2Follow the on-screen instructions and make the settings.≥You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. (>25)≥If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then setting information on the TV such as “On-screen Language” is acquired by this unit.After completing “Easy Setting”, you can perform “Network Easy Setting”.Select “Wired”.Follow the on-screen instructions to make your connection settings.Preparation≥Obtain your network name (>12, SSID).≥If your wireless connection is encrypted please be sure that you know your encryption key.≥[BD77] : If “Wireless LAN Adaptor is not connected.” is displayed, check that the Wireless LAN Adaptor is fully inserted. Alternatively, disconnect and reconnect it. If there is still no change in the display, consult your dealer for advice.1Select “Wireless”.2Select “Search for wireless network” or “WPS (PUSH button method)” , then follow the on-screen instructions and make the settings.∫“WPS (PUSH button method)”If you are using a Wireless router that supports WPS (Wi-Fi Protected Setup), you can easily perform the settings.Easy SettingNetwork Easy SettingWired connectionWireless connectionOKRETURNNetwork Easy SettingWiredWirelessSelect a connection mode. Current setting : Wired LAN cable connection: Connect a LAN cable to the unit and select "Wired."Wireless LAN connection: Select "Wireless."Wireless SettingsSelect a connection method.Please refer to the operating instructions of your wireless access point about connection methods.Search for wireless networkWPS (PUSH button method)Connections & SettingsDMP-BD87_77_VQT3V18_eng.book 11 ページ２０１１年１０月２４日　月曜日　午後２時４５分

12 VQT3V18∫“Search for wireless network”The available wireless networks will be displayed.1Select your network name.≥If your network name is not displayed search again by pressing the [R] button on the remote control. Stealth SSID will not be displayed, in this case enter manually.When your wireless network is encrypted2Select “Encryption Key”.3Enter your encryption key.To enter SSID manuallyIf your SSID is not displayed in step 1, follow these steps.1 To display SSID input screen :Press [HOME] > select “Setup” > select “Player Settings” > select “Network” > select “Network Settings” > select “Wireless Settings” > select “Connection Setting” > select “Manual setting” 2 Select “SSID” and enter your SSID.≥If your wireless network is encrypted, go to step 2.≥Refer to the operating instructions of the hub or router.≥WPS (Wi-Fi Protected Setup) is a standard that facilitates settings relating to the connection and security of wireless LAN devices. To see whether your Wireless router supports WPS, check the Wireless router operating instructions.≥You can perform this setup anytime by selecting “Network Easy Setting” in the Setup menu. (>24)≥You can redo these settings individually using “Network Settings”. (>24)≥Do not use this unit to connect to any wireless network for which you do not have usage rights.During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.≥After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router.≥Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.* An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.OKRETURN Search againSUBMENUWireless SettingsReceptionSelect a wireless network for connection.Network name (SSID)XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXRGBYWireless SettingsEnter the encryption key of the wireless network.Encryption KeySetSOCC_369#“2580‘147*;GNU@,FMT.-ELSZ_DKRY~CJQX:BIPW/AHOVSPACESymbols StandardCharactersOtherCharactersEncryption Key (Touch Pad Mode)ShiftInput ModeDeleteFinishTENTATIVEWireless SettingsEnter your network name (SSID) to connect.SSIDSetDMP-BD87_77_VQT3V18_eng.book 12 ページ２０１１年１０月２４日　月曜日　午後２時４５分

13VQT3V18If you have more than one Panasonic player/recorder and the remote control operates both products at once, you willneed to change the remote control code to prevent this occurrence. (>26, “Remote Control Code”)Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.When a new firmware version is available, the following message is displayed.To update the firmwarePress [HOME] > select “Setup” > select “Player Settings” > select “System Settings” > select “Firmware Update” > select “Update Now”DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.≥If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.http://panasonic.jp/support/global/cs/(This site is in English only.)To show the firmware version on this unit. (>26, “System Information”)≥Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.≥If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. (>26)Reprogramming the remote controlFirmware updatesNew firmware is available.Please update firmware in Setup.The firmware was updated.Current Version: x.xxRETURNOKConnections & SettingsDMP-BD87_77_VQT3V18_eng.book 13 ページ２０１１年１０月２４日　月曜日　午後２時４５分

14 VQT3V18PlaybackInserting or removing media≥When inserting a media, ensure that it is facing the right way up.≥If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.CAUTIONDo not place objects in front of the unit. The disc tray may collide with objects when it is opened, and this may cause malfunction.HOME menuMajor functions of this unit can be operated from the HOME menu.PreparationTurn on the television and select the appropriate video input on the television.1Press [Í] to turn on the unit.2Press [OK] or [3,4,2,1] to select the item.≥If there are any other items, repeat this step.Videos/Photos/MusicNetworkSetupTo show the HOME menuPress [HOME].≥Items to be displayed may vary with the media.≥Where necessary, set “Mixed Data Disc Option” when using a disc with both data files (MP3, JPEG, MKV) and Video. (>26)SD CARDCALLTENTATIVEDisc Play back the contents. (>16)≥When multiple contents are recorded, select the types of contents or the title.USBInternet ContentDisplays the Home screen of Network Service. (>18)Home NetworkDLNA Client (>19)Media Renderer (>19)Player Settings (>23)USB Management (>17)Wallpaper Changes the screen background of HOME menu.VideosMusicPhotos SetupNetworkHOMEBlu-ray Disc PlayerUSER1 2 AddUSER1DMP-BD87_77_VQT3V18_eng.book 14 ページ２０１１年１０月２４日　月曜日　午後２時４５分

15VQT3V18Multi-user modeUp to 4 people can be registered as the users and the settings of wallpaper, and picture and audio quality etc. are saved respectively.Each member of your family can use the unit with their own settings.AThe user name and icon currently selected.BRegister a new user and switch the users with color buttons.1Press [HOME].2Press a color button that indicates new user registration.3Select an item and change the settings according to the indications.Following items can be set.4Select “Confirm Settings (TENTATIVE)”.To change the registered user informationSelect “Edit User Information” from Setup menu. (>26)∫Using color buttonsPress the color buttons in the Home menu to switch to the user corresponding to the button.Registering a new userEnter Nickname(TENTATIVE) Register a user name.Select Icon(TENTATIVE)Register a user icon. Images in recording media can be registered.Select Wallpaper(TENTATIVE)Rgister a screen background of the Home menu.VideosMusicPhotos SetupNetworkHOMEBlu-ray Disc PlayerUSER1 2 AddUSER1ABSwitching the userPlaybackDMP-BD87_77_VQT3V18_eng.book 15 ページ２０１１年１０月２４日　月曜日　午後２時４５分

16 VQT3V18Playback1Insert the media.Playback starts depending on the media.2Select the item to play.Repeat this procedure if necessary.≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫STOP] when you have finished playback to protect the unit’s motor, your television screen and so on.≥MKV : Successive play is not possible.≥It is not possible to playback AVCHD and MPEG2 video which have been dragged and dropped, copied and pasted to the media.≥Still pictures displayed as “ ” cannot be played back with this unit.≥To save on electricity, the power is turned off automatically if there is no button operation for about 30 minutes when not playing back (such as when paused, displaying the menu, displaying still pictures, etc.). (Compatible with ENERGY STAR)These functions may not work depending on the media and contents.Press [∫STOP].The stopped position is memorized.Resume play functionPress [1PLAY] to restart from this position.≥The position is cleared if the tray is opened or you press [∫STOP] several times to display “STOP” on the unit’s display.≥On BD-Video discs including BD-J, the resume play function does not work.Press [;PAUSE].≥Press [;PAUSE] again or [1PLAY] to restart play.SearchWhile playing, press [SEARCH6] or [SEARCH5].≥Music and MP3: The speed is fixed to a single step.Slow-motionWhile paused, press [SEARCH6] or [SEARCH5].≥BD-Video and AVCHD: [SEARCH5] only.The speed increases up to 5 steps.≥Press [1PLAY] to revert to normal playback speed.While playing or paused, press [:] or [9].Skip to the title, chapter or track.While paused, press [2] (2;) or [1] (;1).≥Press and hold to change in succession forward or backward.≥Press [1PLAY] to revert to normal playback speed.≥BD-Video and AVCHD: [1] (;1) only.Press [AUDIO].You can change the audio channel number or soundtrack language, etc.Operations during playbackStopPauseSearch/Slow-motionSkipFrame-by-frameChanging audioDMP-BD87_77_VQT3V18_eng.book 16 ページ２０１１年１０月２４日　月曜日　午後２時４５分

17VQT3V18Press [POP-UP MENU/TOP MENU].≥Press [3,4,2,1] to select the item and press [OK].While playing, press [STATUS].The status messages give you information about what is currently being played. Each time you press [STATUS], the display information may change or will disappear from the screen.≥Depending on media and contents, the display may change or may not appear.e.g.BD-VideoAT: Title, C: Chapter, PL: PlaylistBB: Elapsed time in the titleCC: Current positionDD: Total timee.g.JpegWith “BD-Live” featuring discs, you can enjoy bonus contents that use Internet access.For this BD-Live function, insertion of a USB device is necessary along with Internet connection.1Perform network connection and settings. (>9, 11)2Insert a USB memory with 1 GB or more free space.≥The USB device is used as the local storage.3Insert the disc.∫Deleting data on the USB deviceSelect “USB Management” in the Home menu (>14) .≥The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.≥“BD-Live Internet Access” may need to be changed for certain discs (>25).≥During search/slow-motion or frame-by-frame, only the primary video is displayed.Displaying menus and playback informationShow top menu/pop-up menuShow the status messagesPlayBD-VideoT1 C1 0:05.140:20.52AC DB Date 11/12/2007 Size 500 x 375ManufacturerEquipment1 / 26Enjoying BD-LivePlaybackDMP-BD87_77_VQT3V18_eng.book 17 ページ２０１１年１０月２４日　月曜日　午後２時４５分

18 VQT3V18Enjoying Network Service(Netflix, etc.)You can enjoy Network Service.* Images are for illustration purposes, contents may change without notice.Preparation≥Network connection (>9)≥Network setting (>11)1Press [NETWORK].≥NETFLIX can be accessed directly by pressing [NETFLIX] button.2Press [1] to select “Internet Content”.3Select the item.To exit from Network ServicePress [EXIT], [HOME] or [POP-UP MENU/TOP MENU].≥When playing content in the media, Network Service cannot be accessed by pressing [NETWORK].≥In the following cases, settings are possible using “Internet Content Settings” (>24)– When restricting the use of Network Service.– When the audio is distorted.– When wrong time is displayed≥If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended.≥Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use Network Service function. (>13)≥Network Service home screen is subject to change without notice.≥The services through Network Service are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.≥All features of websites or content of the service may not be available.≥Some content may be inappropriate for some viewers.≥Some content may only be available for specific countries and may be presented in specific languages.Network ServiceSettings*TENTATIVENetwork Service provides a variety of selected Internet services such as the followings.≥Online movie rental service≥Video browsing serviceInternetDMP-BD87_77_VQT3V18_eng.book 18 ページ２０１１年１０月２４日　月曜日　午後２時４５分

19VQT3V18DLNA featureYou can share photos, videos and music stored in the DLNA Certified media server (PC with windows7 installed, smartphone, etc) connected to your home network, and enjoy the contents with this player.Preparation1Perform network connection (>9) and network settings (>11) of this unit. 2Perform Home Network settings of the connected equipment.3Add the contents and folder to the libraries of the Windows Media® Player or the smartphone, etc.≥Playlist of Windows Media® Player can play back only the contents that are stored in the libraries.1Press [HOME].2Select “Network”.3Select “Home Network”.4Select “DLNA Client”.≥This list can be updated by pressing [R] on the remote control.5Select the equipment.6Select the item to play.≥You may be able to use convenient functions depending on the content by pressing [OPTION].≥Control Panel is displayed once the playback starts. Press [OK] if the Control Panel is not displayed, and press [RETURN] to hide the Control Panel.To exit from Home NetworkPress [EXIT], [HOME] or [POP-UP MENU/TOP MENU].You can use the smartphone, etc. as the Digital Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit).Possible applications:* DMC compatible software should be installed.PreparationPerform steps 1 to 3. (>left )4Perform the “Remote Device Settings”. (>25)≥You can register up to 16 equipment.1Press [HOME].2Select “Network”.3Select “Home Network”.4Select “Media Renderer”.5Operate the DMC compatible equipment.To exit from Media Renderer screenPress [HOME].≥Ensure that the router for your home network has adequate security system to prevent unauthorized access.≥Depending on the contents and the connected equipment, playback may not be possible.≥Items displayed in gray on the display cannot be played back by this unit.≥This unit can be played back via connected equipment only when controlled using DMC.≥Depending on the performance of the connected PC, video frames may be dropped during playback, or video may not be played back at all.Playing back contents on the DLNA serverPlayerServer઒Using the Digital Media ControllerFor more details, refer to the following website and the operating instructions for each item of equipment.http://panasonic.jp/support/global/cs/(This site is in English only.)RendererRendererServerServer+Controller*Controller*TENTATIVETENTATIVEPlaybackDMP-BD87_77_VQT3V18_eng.book 19 ページ２０１１年１０月２４日　月曜日　午後２時４５分

20 VQT3V18VIERA LinkTM “HDAVI ControlTM” Preparation1Set “VIERA Link” to “On” (>26). (The default setting is “On”.)2Set the “HDAVI Control” operations on the connected equipment (e.g., TV).3Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the “HDAVI Control” function works properly.Also when the connection or settings are changed, repeat this procedure.When play starts on the unit, the TV will automatically switch the input channel and display the corresponding action.Additionally when the TV is off, the TV will automatically turn on.All connected equipment compatible with “HDAVI Control”, including this unit, automatically turns off when you switch the television off.≥This unit supports “HDAVI Control 1” function.This standard is compatible with Panasonic’s conventional HDAVI equipment.≥VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.≥Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.Automatic input switchingPower on linkWhat is VIERA Link “HDAVI Control”?VIERA LinkTM is a new name for EZ SyncTM.VIERA Link “HDAVI Control” is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or amplifier/receiver under “HDAVI Control”.You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.Power off linkDMP-BD87_77_VQT3V18_eng.book 20 ページ２０１１年１０月２４日　月曜日　午後２時４５分