TCL Technoly Electronics BDHTS001 BLU-RAY DISC RECEIVER User Manual

TCL Technoly Electronics (Huizhou) Co., Ltd. BLU-RAY DISC RECEIVER

XV-BD122W_User manual

Blu-ray Disc surround system
Système Home-Cinéma Blu-ray Disc
sistema surround de Blu-ray Disc
HTZ-BD52
HTZ-BD32
HTZ-BD92HW
HTZ-BD82HF
XV-BD422W
XV-BD122W
XV-BD922FSW
XV-BD822FSW
S-BD422W
S-BD122
S-BD922HW
S-BD822HF
S-BD922SW
Blu-ray Disc receiver
Système Home-Cinéma Blu-ray Disc
receptor de Blu-ray Disc
Speaker System
Enceintes acoustiques
Sistemas de parlantes
Subwoofer
Enceinte d’extrêmes graves
Altavoz de subgraves
ENGLISH
FRANÇAIS
ESPAÑOL
Register your product on
http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)
#
Protect your new investment
The details of your purchase will be on file for reference in the event of an
insurance claim such as loss or theft.
#
Improve product development
Your input helps us continue to design products that meet your needs.
#
Receive a free Pioneer newsletter
Registered customers can opt in to receive a monthly newsletter.
#
Receive free tips, updates and service bulletins on
your new product
http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1_A1_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower pot)
or expose it to dripping, splashing, rain or moisture.
D3-4-2-1-3_A1_En
WARNING
Before plugging in for the first time, read the following
section carefully.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the rear panel.
D3-4-2-1-4*_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 10 cm at top, 10 cm at rear, and 10 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
D3-4-2-1-7b*_A1_En
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007.
CLASS 1 LASER PRODUCT
D58-5-2-2a_A1_En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly.
After you have finished reading the instructions, put them away in a safe place for future reference.
When using this product, confirm the safety
information shown on the bottom of the unit.
D3-4-2-2-4_B1_En
Safety Information
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
Only use attachments/accessories specified by
the manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
D3-7-13-69_En
11)
12)
13)
14)
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product may expose you to chemicals listed on
proposition 65 known to the State of California and
other governmental entities to cause cancer and
birth defect or other reproductive harm.
D36-P5_B1_En
This Class B digital apparatus complies with
Canadian ICES-003.
D8-10-1-3_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left unused
for a long period of time (for example, when on
vacation).
D3-4-2-2-1a_A1_En
CAUTION
The 1STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
Condensation
If the player is moved suddenly from a cold place into a
warm room (in winter, for example) or if the
temperature in the room in which the player is installed
rises suddenly due to a heater, etc., water droplets
(condensation) may form inside (on operating parts and
the lens). When condensation is present, the player will
not operate properly and playback is not possible. Let
the player stand at room temperature for 1 or 2 hours
with the power turned on (the time depends on the
extent of condensation). The water droplets will
dissipate and playback will become possible.
Condensation can also occur in the summer if the
player is exposed to the direct wind from an
air-conditioner. If this happens, move the player to a
different place.
S005_A1_En
IMPORTANT NOTICE
THE MODEL NUMBER AND SERIAL NUMBER OF
THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS IN THE SPACE BELOW
FOR FUTURE REFERENCE.
MODEL NO.
SERIAL NO.
D36-AP9-2_A1_En
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a
safe level – a level that lets the sound come through
clearly without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time, your hearing
“comfort level” adapts to higher volumes of sound, so
what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by setting
your equipment at a safe level BEFORE your hearing
adapts.
ESTABLISH A SAFE LEVEL:
Set your volume control at a low setting.
Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Once you have established a comfortable sound
level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING
GUIDELINES:
Do not turn up the volume so high that you can’t
hear what’s around you.
Use caution or temporarily discontinue use in
potentially hazardous situations.
Do not use headphones while operating a motorized
vehicle; the use of headphones may create a traffic
hazard and is illegal in many areas.
S001a_A1_En
WARNING
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile
Configurations. The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
Canada IC warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Cautions on 3D Viewing
 If you should experience any fatigue or discomfort while viewing 3D images, stop viewing them.
 Children, particularly those under 6, may be more prone to sensitivity, so guardians should watch for
any signs of fatigue or discomfort.
 When viewing 3D images, rest periodically.
 ([WHQGHGYLHZLQJRI'LPDJHVZLWKRXWUHVWSHULRGVFRXOGFDXVHIDWLJXHRUGLVFRPIRUW
Notes on Copyrights
 %HFDXVH$$&6$GYDQFHG$FFHVV&RQWHQW
6\VWHPLVDSSURYHGDVFRQWHQWSURWHFWLRQ
V\VWHPIRU%OXUD\'LVFIRUPDWVLPLODUWRXVH
RI&66&RQWHQW6FUDPEOH6\VWHPIRU'9'
IRUPDWFHUWDLQUHVWULFWLRQVDUHLPSRVHGRQ
SOD\EDFNDQDORJVLJQDORXWSXWHWFRI$$&6
SURWHFWHGFRQWHQWV7KHRSHUDWLRQRIWKLV
SURGXFWDQGUHVWULFWLRQVRQWKLVSURGXFWPD\
YDU\GHSHQGLQJRQ\RXUWLPHRISXUFKDVH
DVWKRVHUHVWULFWLRQVPD\EHDGRSWHGDQG
RUFKDQJHGE\$$&6DIWHUWKHSURGXFWLRQRI
WKLVSURGXFW
 )XUWKHUPRUH%'5200DUNDQG%'DUH
DGGLWLRQDOO\XVHGDVFRQWHQWSURWHFWLRQ
V\VWHPVIRU%OXUD\'LVFIRUPDWZKLFK
LPSRVHVFHUWDLQUHVWULFWLRQVLQFOXGLQJ
SOD\EDFNUHVWULFWLRQVIRU%'5200DUN
DQGRU%'SURWHFWHGFRQWHQWV7RREWDLQ
DGGLWLRQDOLQIRUPDWLRQRQ$$&6%'520
0DUN%'RUWKLVSURGXFWSOHDVHFRQWDFW
DQDXWKRUL]HG&XVWRPHU6HUYLFH&HQWHU
 0DQ\%'520'9'GLVFVDUHHQFRGHGZLWK
FRS\SURWHFWLRQ%HFDXVHRIWKLV\RXVKRXOG
RQO\FRQQHFW\RXUSOD\HUGLUHFWO\WR\RXU79
QRWWRD9&5&RQQHFWLQJWRD9&5UHVXOWV
LQDGLVWRUWHGSLFWXUHIURPFRS\SURWHFWHG
GLVFV
 7KLVLWHPLQFRUSRUDWHVFRS\SURWHFWLRQ
WHFKQRORJ\WKDWLVSURWHFWHGE\86SDWHQWV
DQGRWKHULQWHOOHFWXDOSURSHUW\ULJKWVRI
5RYL&RUSRUDWLRQ5HYHUVHHQJLQHHULQJDQG
GLVDVVHPEO\DUHSURKLELWHG
 8QGHUWKH86&RS\ULJKWODZVDQG&RS\ULJKW
ODZVRIRWKHUFRXQWULHVXQDXWKRUL]HG
UHFRUGLQJXVHGLVSOD\GLVWULEXWLRQRU
UHYLVLRQRIWHOHYLVLRQSURJUDPVYLGHRWDSHV
%'520GLVFV'9'V&'VDQGRWKHU
PDWHULDOVPD\VXEMHFW\RXWRFLYLODQGRU
FULPLQDOOLDELOLW\
Important Notice for TV colour
system
7KHFRORXUV\VWHPRIWKLVSOD\HUGLIIHUV
DFFRUGLQJWRFXUUHQWO\SOD\LQJGLVFV
)RUH[DPSOHZKHQWKHSOD\HUSOD\VWKHGLVF
UHFRUGHGLQWKH176&FRORXUV\VWHPWKHLPDJH
LVRXWSXWDVDQ176&VLJQDO
2QO\WKHPXOWLV\VWHPFRORXU79FDQUHFHLYHDOO
VLJQDOVRXWSXWIURPWKHSOD\HU
 ,I\RXKDYHD3$/FRORXUV\VWHP79\RXZLOO
VHHMXVWGLVWRUWHGLPDJHVZKHQXVLQJGLVFV
RUYLGHRFRQWHQWVUHFRUGHGLQ176&
 7KHPXOWLV\VWHPFRORXU79FKDQJHVWKH
FRORXUV\VWHPDXWRPDWLFDOO\DFFRUGLQJWR
LQSXWVLJQDOV,QFDVHWKDWWKHFRORXUV\VWHP
LVQRWFKDQJHGDXWRPDWLFDOO\WXUQLWRIIDQG
WKHQRQWRVHHQRUPDOLPDJHVRQVFUHHQ
 (YHQLIWKHGLVFUHFRUGHGLQ176&FRORXU
V\VWHPDUHZHOOGLVSOD\HGRQ\RXU79WKHVH
PD\QRWEHUHFRUGHGFRUUHFWO\RQ\RXU
UHFRUGHU
Table of Contents
1 Before you start
8 Introduction
8 – Supplied accessories
8 – Accessories of speaker box (BCS-727)
8 – Accessories of speaker (BCS-323)
8 – Accessories of speaker (BCS-HW929)
9 – Accessories of speaker (BCS-HF828)
9 – Accessories of speaker (BCS-SB626)
9 – Accessories of speaker (BCS-FS525)
10 – Putting the batteries in the remote control
10 – Software update
11 – Types of discs/les that can be played
17 – Trademarks and licenses
18 Remote control
20 Front panel
21 Rear panel
21 – BCS-727/BCS-323
21 – BCS-HW929/BCS-HF828/BCS-SB626/BCS-
FS525
2 Connecting
22 Assemble the speakers
22 – Speaker setup for BCS-727
23 – Wall mounting the speaker for BCS-727
24 – Additional notes on speaker for BCS-727
24 – Positioning the system for BCS-727
25 – Speaker setup for BCS-323
25 – Wall mounting the speaker for BCS-323
26 – Additional notes on speaker for BCS-323
26 – Positioning the system for BCS-323
27 – Speaker setup for BCS-HW929
28 – Wall mounting the speaker for BCS-HW929
29 – Additional notes on speaker for BCS-
HW929
29 – Positioning the system for BCS-HW929
30 – Speaker setup for BCS-HF828
32 – Wall mounting the speakers for BCS-HF828
33 – Additional notes on speaker for BCS-HF828
33 – Positioning the system for BCS-HF828
34 – Speaker setup for BCS-SB626
35 – Wall mounting the speaker for BCS-SB626
36 – Additional notes on speaker placement for
BCS-SB626
36 – Positioning the system for BCS-SB626
37 – Speaker setup for BCS-FS525
39 – Wall mounting the speakers for BCS-FS525
40 – Additional notes on speaker placement for
BCS-FS525
41 – Positioning the system for BCS-FS525
42 Connecting to Your TV
42 – HDMI connection
43 – ARC (Audio Return Channel) function
43 – Video connection
44 Antenna connection
44 Connections with external device
44 – AUX connection
45 – PORTABLE IN connection
45 – OPTICAL IN 1/2 connection
46 – HDMI IN 1/2 connection
46 – Connecting optional Bluetooth® ADAPTER
47 Connecting to your Home Network
47 – Wired network connection
48 – Wireless network connection
48 – Wireless network setup
49 – WPS setup (Wi-Fi Protected Setup)
51 USB device connection
3 Getting Started
52 Making settings using the Setup Navigator
menu
53 Operating the TV with the player's remote
control
54 – TV preset code list
4 Playback
55 Playing discs or les
56 – Forward and reverse scanning
56 – Playing specic chapters, tracks or les
56 – Skipping content
56 – Playing in slow motion
56 – Step forward and step reverse
56 – Playing a specic section within a title or
track repeatedly (A-B Repeat)
56 – Playing repeatedly (Repeat Play)
1
2
3
4
5
6
7
8
9
10
57 – Playing in the desired order (Programmed
Play)
57 – Making bookmarks
57 – Zoom
58 – Playing photos as slideshows
58 – Switching the camera angles
58 – Switching the subtitles
59 – Switching the audio
59 – Switching the CD/SACD playback area
59 – Displaying the disc information
60 – Enjoying BONUSVIEW or BD-LIVE
61 – Playback functions
62 Using the TOOLS menu
62 – Playing from a specic time (Time Search)
63 – Playing a specic title, chapter, track or le
(Search)
63 – Playing specied range of discs, titles or
chapter (track/le) in random order
63 – Continuing playback from a specied
position (Continued Viewing Playback)
5 Playback from Home Media
Gallery
64 About Home Media Gallery
64 – About network playback
66 DLNA Search
66 Disc/USB playback
66 – Playing back image les
67 Playing in the desired order (Playlist)
67 – Adding tracks/les
67 – Playing the playlist
67 – Deleting tracks/les from the playlist
6 Playing the web contents
68 Available web contents
68 Playing the items
7 Other Operating
69 Recording Audio CD to a USB device
70 iPod/iPhone playback
70 – Connecting your TV
71 – Playing your iPod/iPhone
72 Radio Operations
72 – Listening to the radio
72 – Presetting the radio stations
72 – Deleting all the saved stations
72 – Improving poor FM reception
72 – Seeing information about a radio station
73 Bluetooth® ADAPTER for Wireless Enjoyment
of Music
73 – Wireless music play
73 – Listen to music on a Bluetooth wireless
technology enabled device
74 Karaoke
75 Sound
8 Advanced settings
76 Changing the settings
76 – Operating the initial setup screen
83 – Software updating
84 – Restoring all the settings to the factory
default settings
85 – Language code table and country/area
code table
9 Troubleshooting
86 – Picture
87 – Sound
87 – Playback
88 – Control function
88 – Network
89 – Others
10 Appendix
90 Specications
94 Maintenance
94 – Handling the unit
94 – Notes on discs
95 Important Information Relating to Network
Services
Before you start8
En
Before you start
1
Chapter 1
Before you start
Introduction
Supplied accessories
Video cable (1) Remote control (1)
Battery (2) FM antenna (1)
iPod cradle (1) Power cord
:DUUDQW\FDUG
2SHUDWLQJLQVWUXFWLRQV7KLVGRFXPHQW
Accessories of speaker box
(BCS-727)
Speaker cables (4) Non-skid pads (1)
Screws M4 x 16 (16)
(They are used to fix to the
base and lower cabinet.)
Screws M4 x 12 (8)
(They are used to fix the
upper and lower cabinet.)
Accessories of speaker
(BCS-323)
Non-skid pads (5) Screws M4x12
[Taping type] (5)
(These screws are used
to fix the speakers to the
stands.)
Accessories of speaker
(BCS-HW929)
Bracket (2)
Large non-skid pads (1)
Non-skid pads (1)
 :LUHVWD\V
Before you start 9
En
Before you start
1
Accessories of speaker
(BCS-HF828)
Base (2) Stand arm (2)
Bracket (2)
 Screw (Bind head)
(2)
 Screw (Flat head)
(4)
 Hexagonal nut (2)
 Seal (1)
Speaker cable (1) Large non-skid pads (1)
Accessories of speaker
(BCS-SB626)
Speaker cable (1) Screws (2)
Speaker stand bases (2) Small non-skid pads (1)
Accessories of speaker
(BCS-FS525)
Speaker cable (3) Small non-skid pads (1)
Large non-skid pads (1) Small screws (8)
Large screws (4) Speaker stand bases (2)
Large poles (2) Small poles (2)
WARNING
Store small parts out of the reach of
children and infants. If accidentally
swallowed, contact a doctor immediately.
Before you start10
En
Before you start
1
Putting the batteries in the
remote control
1. Open the rear cover.
Press lightly on
this part and slide
into the direction
of the arrow.
2. Insert the batteries (AAA/R03 x 2).
Insert as indicated by the / marks into
the battery compartment.
Insert the
negative ()
side first.
3. Close the rear cover.
Close securely (a click should be heard).
The batteries included with the player
have been provided to allow you to check
SURGXFWRSHUDWLRQDQGPD\QRWODVWORQJ:H
recommend using alkaline batteries that have
a longer life.
WARNING
 Do not use or store batteries in direct sunlight or
other excessively hot place, such as inside a car
or near a heater. This can cause batteries to leak,
overheat, explode or catch fire. It can also reduce
the life or performance of batteries.
Caution
 Do not use any batteries other than the ones
specified. Also, do not use a new battery together
with an old one.
 :KHQORDGLQJWKHEDWWHULHVLQWRWKHUHPRWHFRQWURO
set them in the proper direction, as indicated by
the polarity marks ( and ).
 Do not heat batteries, disassemble them, or throw
them into flames or water.
 Batteries may have different voltages, even if they
look similar. Do not use different kinds of batteries
together.
 To prevent leakage of battery fluid, remove the
batteries if you do not plan to use the remote
control for a long period of time (1 month or more).
If the fluid should leak, wipe it carefully off the
inside of the case, then insert new batteries. If a
battery should leak and the fluid should get on your
skin, flush it off with large quantities of water.
 :KHQGLVSRVLQJRIXVHGEDWWHULHVSOHDVHFRPSO\
with governmental regulations or environmental
public institution's rules that apply in your country/
area.
Software update
Product information on this player is provided
on the Pioneer website. Check this website for
update and service information on your Blu-ray
disc player.
IN Europe:
http://www.pioneer.eu/
IN U.K.:
http://www.pioneer.eu/
http://www.pioneer.co.uk/
IN Russia:
http://www.pioneer.eu/
http://www.pioneer-rus.ru/
IN Hong Kong:
http://www.pioneerhongkong.com.hk/
IN Singapore:
http://www.pioneer.com.sg/rmwaredownload
IN Australia:
http://www.pioneer.com.au/
Before you start 11
En
Before you start
1
Types of discs/les that can be played
Playable discs
Discs with the logo marks below indicated on the disc label, package or jacket can be played.
Caution
 Only the discs that have been finalized can be played.
Disc type Logo
Application format
BDMV BDAV DVD-
Video DVD VR CD-DA
DTS-CD
DATA-
DISC1
BD2
BD-ROM 
BD-R 
BD-RE 
DVD
DVD-ROM 
DVD-R2,3,4 67
'9'5:3,7 67
DVD+R2,3 
'9'5:3
CD
CD-DA
(Audio CD)8
CD-R3
&'5:3
CD-ROM 
1. Discs on which video, image or audio files are recorded. This player does not support multisession discs or multiborder
recording.
2 Including dual-layered discs.
3. Finalize them before playing them on this player.
4 DVD-R for Authoring discs (3.95 and 4.7 GB) cannot be played.
5. Including the AVCHD format.
6. Including the AVCREC format.
 9HUVLRQ'9'5:GLVFVFDQQRWEHSOD\HG
8. Including Video CDs.
Before you start12
En
Before you start
1
 "Blu-ray Disc", "Blu-ray" and "Blu-ray Disc" logo
are trademarks of Blu-ray Disc Association.
 is a trademark of DVD Format/Logo
Licensing Corporation.
Discs that cannot be played
 HD DVDs
 DVD-RAM discs
It is possible that some discs other than the
ones listed above may not be playable either.
Note
 Some discs cannot be played, even if one of the
logo marks on the previous page is indicated.
 To play 8 cm discs, set the disc in the 8 cm disc
depression in the center of the disc tray. No
adapter is necessary. 8 cm BD-ROMs cannot be
played.
About playback of unauthorized
copies
Cinavia Notice
This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-produced film and videos and
WKHLUVRXQGWUDFNV:KHQDSURKLELWHGXVHRIDQ
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138,
USA.
Copyright 2004-2010 Verance Corporation.
Cinavia™ is a Verance Corporation trademark.
Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under
license from Verance Corporation. All rights
reserved.
About audio formats
The following audio formats are supported on
this player:
 Dolby TrueHD
 Dolby Digital Plus
 Dolby Digital
 DTS-HD Master Audio
 DTS-HD High Resolution Audio
 DTS Digital Surround
 MPEG audio (AAC)
 Linear PCM
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 &
other U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-HD and
the Symbol together are registered trademarks &
DTS-HD Master Audio | Essential is a trademark
of DTS, Inc. Product includes software. © DTS,
Inc. All Rights Reserved.
Playing BDs
 BDs (BDMV) compatible with the formats
below can be played.
– Blu-ray Disc Read-Only (ROM) Format
Version 2
– Blu-ray Disc Recordable (R) Format
Version 2
– Blu-ray Disc Rewritable (RE) Format
Version 3
This player supports BD-ROM Profile 5.
"Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of Blu-ray Disc Association.
%21869,(:IXQFWLRQVVXFKDVSOD\EDFN
of secondary video (Picture-in-Picture) and
secondary audio can be used. The data
XVHGZLWKWKH%21869,(:IXQFWLRQVWKH
secondary video (Picture-in-Picture) and
secondary audio data) may be stored in the
storage. For details on secondary video and
secondary audio playback, refer to the disc's
instructions.
Before you start 13
En
Before you start
1
"BONUSVIEW" is trademark of Blu-ray Disc
Association.
BD-LIVE functions such as downloading
movie trailers or additional audio and
subtitle languages and playing on-line
games can be enjoyed over the Internet. The
data downloaded with the BD-LIVE function
(trailers, etc.) is stored in the storage. Refer
to the disc's instructions for details about
BD-LIVE functions.
"BD-LIVE" logo is trademark of Blu-ray Disc
Association.
:LWK%'520VLWLVSRVVLEOHWRXVH
BD-J (Java) applications to create highly
interactive titles, for example including
games.
Oracle and Java are registered trademarks of
Oracle and/or its affiliates. Other names may
be trademarks of their respective owners.
 BDs (BDAV) compatible with the formats
below can be played.
– Blu-ray Disc Recordable (R) Format
Version 1
– Blu-ray Disc Rewritable (RE) Format
Version 2
Playing DVDs
This label indicates playback compatibility with
DVD-RW discs recorded in VR format (Video
Recording format). However, for discs recorded
with a record-only-once encrypted program,
playback can only be achieved using a CPRM
compatible device.
The AVCHD is a high definition (HD) digital
video camera recorder format recording high-
definition onto certain media by using highly
efficient codec technologies.
"AVCHD" and the "AVCHD" logo are trademarks
of Panasonic Corporation and Sony Corporation.
About region numbers
Blu-ray Disc Player and BD-ROM or DVD-Video
discs are assigned region numbers according
to the region in which they are sold.
This player's region numbers are:
 BD-ROM:
– Europe, Australia and New Zealand
models: B
– Russia models: C
– Others: A
 DVD-Video:
– Europe models: 2
– Australia and New Zealand models: 4
– Russia models: 5
– Others: 3
Discs not including these numbers cannot be
played. Discs playable on this player are as
shown below.
 BDs:
– Europe, Australia and New Zealand
models: B (including B) and ALL
– Russia models: C (including C) and ALL
– Others: A (including A) and ALL
 DVDs:
– U.K. models: 2 (including 2) and ALL
– Australia and New Zealand models: 4
(including 4) and ALL
– Russia models: 5 (including 5) and ALL
– Others: 3 (including 3) and ALL
Before you start14
En
Before you start
1
Playing CDs
Regarding copy protected CDs: This player
is designed to conform to the specifications
of the Audio CD format. This player does not
support the playback or function of discs that
do not conform to these specifications.
DualDisc playback
A DualDisc is a two-sided disc, one side of
which contains DVD content - video, audio,
etc. - while the other side contains non-DVD
content such as digital audio material.
The DVD side of a DualDisc can be played on
this player.
The non-DVD, audio side of the disc is not
compatible with this player.
It is possible that when loading or ejecting
a DualDisc, the opposite side to that being
played will be scratched. Scratched discs may
not be playable.
For more detailed information on the DualDisc
specification, please refer to the disc
manufacturer or disc retailer.
Playing discs created on computers or
BD/DVD recorders
 It may not be possible to play discs recorded
using a computer due to the application
settings or computer's environment settings.
Record discs in a format playable on this
player. For details, contact the dealer.
 It may not be possible to play discs
recorded using a computer or a BD/DVD
recorder, if burn quality is not good due to
characteristics of the disc, scratches, dirt on
the disc, dirt on the recorder's lens, etc.
About video, audio, and image files
and folders
Audio and image files can be played on this
player when the folders on the disc or USB
device are created as described below.
Example of folder structure:
*
*
*
*
Root
001.jpg/001.mp3
xxx.jpg/xxx.mp3
01 Folder
XX Folder
Folder
001.jpg/001.mp3
xxx.jpg/xxx.mp3
001.jpg/001.mp3
xxx.jpg/xxx.mp3
001.jpg/001.mp3
xxx.jpg/xxx.mp3
* The number of folders and files within a
single folder (including the root directory) is
limited to a maximum of 256. Also, keep the
number of folder layers to a maximum of 5.
Note
 The file and folder names displayed on this player
may differ from those displayed on a computer.
Before you start 15
En
Before you start
1
Playable les
Video, image and audio files recorded on BDs,
DVDs, CDs or USB devices can be played.
Caution
 In DVD, only the one recorded by the ISO 9660 file
system can be played.
 Some files may not be playable.
 For some files, it may not be possible to use certain
functions during playback.
 It may not be possible to play some files, even if
they have the extension of a file playable on this
player.
 Files protected by DRM (Digital Rights
Management) cannot be played (not including
DivX VOD files).
Supported video file formats
 Real RMVB (Only for ASEAN and
Taiwan models)
Real RMVB logo is a trademark or a registered
trademark of RealNetworks, Inc.
 DivX Plus HD
DivX Certified® to play DivX® and DivX
PlusTM HD (H.264/MKV) video up to 1080p
HD including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an official
DivX Certified® device that plays DivX video.
Visit divx.com for more information and
software tools to convert your files into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order
to play purchased DivX Video-on-Demand
(VOD) movies. To obtain your registration
code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for
more information on how to complete your
registration.
DivX®, DivX Certified®, DivX PlusTM HD and
associated logos are trademarks of DivX, Inc.
and are used under license.
Note
 This DivX® Certified device must be registered
in order to play DivX Video-on-Demand (VOD)
content. First generate the DivX VOD registration
code for your device and submit it during the
registration process. Important: DivX VOD content
is protected by a DivX DRM (Digital Rights
Management) system that restricts playback to
registered DivX Certified devices. If you try to play
DivX VOD content not authorized for your device,
the message Authorization Error will be displayed
and your content will not be played. Learn more at
www.divx.com/vod.
– This player's DivX VOD registration code can
be checked at HOME MENU AInitial Setup A
Playback ADivX(R) VOD DRM ARegistration
Code (page 78).
– The number of views is restricted for some
'LY;92'ILOHV:KHQVXFKILOHVDUHSOD\HGRQ
this player, the remaining number of views is
displayed. Files for which the remaining number
of views has reached 0 cannot be played (This
DivX rental has expired is displayed). Files for
which the number of views is not restricted
can be played as many times as you like (the
remaining number of views is not displayed).
Before you start16
En
Before you start
1
Table of Playable Files
Playable files
(Extensions)
Playable media
File specifications
BD-R/RE/-R DL/
RE DL/-R LTH,
DVD-R/RW/-R DL/
+R/+RW/+R DL,
CD-R/RW
USB devices1Network2
MP3
(.mp3) 
Sampling frequencies: Up to 48 kHz
Bit rate: Up to 320 kbps
Audio type: MPEG-1 Audio Layer 3
:0$
(.wma) 
Sampling frequencies: Up to 48 kHz
Bit rate: Up to 192 kbps
$XGLRW\SH:0$YHUVLRQ
LPCM
(.wav) 
Sampling frequencies: Up to 192 kHz
Quantization bitrate: 16 bit
Channel: 2ch
FLAC
(.flac) 
Sampling frequencies: Up to 192 kHz
Quantization bitrate: 16 bit, 24 bit
Channel: 2ch
JPEG
(.jpg/.jpeg) 
Maximum resolution: 4 000 x 3 000 pixels
DivX
(.avi/.divx/.mkv) 
Supported versions: Through DivX® PLUS HD
Maximum resolution:
Up to 1 920 x 1 080 (DivX® PLUS HD)
Up to 1 280 x 720 (MKV)
MP4
(.mp4) 
Maximum resolution: Up to 1 920 x 1 080
Video: MPEG4, MPEG-4 AVC (level 4.1)
Audio: AAC, MP3
:09
(.wmv) 
Maximum resolution: Up to 1 280 x 720
9LGHR:09:09$39&
$XGLR:0$
AVI
(.avi) 
Maximum resolution: Up to 1 920 x 1 080
Video: MPEG4
Audio: MP3, AAC, AC-3
RMVB3
(.rm/.rmvb) 
Maximum resolution: Up to 1 280 x 720
Video: RealVideo®
Audio: RealAudio®, AAC
1. This unit supports FAT16, FAT32 and NTFS file systems.
2. A requirement for playing files as a DMP. For details, see page 64.
3. Only for ASEAN and Taiwan models.
Note
 Depending on the file structure and server capacity, it may not be possible to play certain files, even for files
indicated on the table of playable files above.
 Copyright-protected files and contents recorded from digital broadcasts (satellite, cable or digital terrestrial)
cannot be played via LAN.
 Files protected by DRM (Digital Rights Management) cannot be played.
 AVCHD contents cannot be played via LAN.
Before you start 17
En
Before you start
1
Trademarks and licenses
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide
patents issued & pending. DTS-HD, the
Symbol, & DTS-HD and the Symbol together
are registered trademarks & DTS-HD Master
Audio | Essential is a trademark of DTS, Inc.
Product includes software. © DTS, Inc. All
Rights Reserved.
DLNA®, the DLNA Logo and DLNA
CERTIFIED® are trademarks, service marks,
or certification marks of the Digital Living
Network Alliance.
7KH:L)L&(57,),('/RJRLVDFHUWLILFDWLRQ
PDUNRIWKH:L)L$OOLDQFH
7KH:L)L3URWHFWHG6HWXS0DUNLVD
WUDGHPDUNRIWKH:L)L$OOLDQFH
“x.v.Colour”, and are
trademarks of Sony Corporation.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod, or
iPhone, respectively, and has been certified
by the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards. Please
note that the use of this accessory with iPod
or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered
in the U.S. and other countries.
YouTube™ is a trademark of Google Inc.
3LFDVD:HE$OEXPVLVDWUDGHPDUNRI
Google Inc.
This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
Before you start18
En
Before you start
1
Remote control
1
2
3
4
5
6
7
 1        
1 (STANDBY/ON): Press to turn the power on
and off.
FUNCTION: Changes the input source or
function.
When switching while viewing the display window
on the player
1. The input source switches every time the
FUNCTION is pressed.
2. Select the desired input source and press
ENTER.
When switching while viewing the TV or monitor
1. Press FUNCTION to display the [Source Menu].
2. The input source switches every time the
FUNCTION is pressed. You can also use the
cursor /to switch the input source.
3. Select the desired input source and press
ENTER.
* The Source Menu screen can also be displayed
by [HOME MENU] A[Source Menu] and
pressing ENTER.
$ OPEN/CLOSE: Opens and closes the disc
tray.
 2        
TV Control Buttons: See page 53.
HOME MEDIA GALLERY: See page 64.
KARAOKE: Press to display the Karaoke
Settings screen.
RESOLUTION: Sets the output resolution for
HDMI (See page 77).
NET CONTENTS: Enhances the picture quality
of network video contents.
KEY LOCK: See page 19.
MIC VOLUME: Adjust mic volume.
DIMMER: Dims the light on the unit.
SLEEP: Sets a certain period of time after which
the unit will switch to off.
EXIT: See page 68.
 3        
VIRTUAL 3D SOUND: Switch VIRTUAL 3D
SOUND effects. (See page 75)
SOUND: Switches to Sound settings. (See page
75).
Before you start 19
En
Before you start
1
VOL +/- : Adjusts speaker volume.
SOUND RETRIEVER: Switches Sound Retriever
setting.
CD/SACD: See page 59.
'USB REC: Records an audio.
DISPLAY: Displays or exits On- Screen Display.
MUTE: Mute the unit.
 4        
TOP MENU: Press to display the top menu of
the BD-ROM or DVD-Video.
POPUP MENU/MENU: Press to display the BD-
ROM or DVD-Video menus.
/ / / (up/ down/ left/ right): Used to navigate
on-screen displays.
ENTER: Acknowledges menu selection.
HOME MENU: Displays or exits the [Home
Menu].
RETURN: Press to return to the previous
screen.
 5        
REPLAY: Press to jump back 10 seconds when
REPLAY is pressed during playback.
TOOLS: See page 62.
CONTINUED: Use to continue playback from a
specified position.
SKIP SEARCH: Press to skip 30 seconds ahead
when SKIP SEARCH is pressed during playback.
+/-//,0/./,: See page 56.
PLAY ( ): Starts playback.
REV/FWD ()*): See page 56.
PAUSE (!): Pauses playback.
STOP (#): Stops playback or recording.
 6        
0-9 numerical buttons: Selects numbered
options in a menu or inputs letters in the
keypad menu.
AUDIO: See page 59.
SUBTITLE: See page 58.
ANGLE: See page 58.
 7        
CLEAR: Press to clear the numeric number, etc.
REPEAT: See page 56.
A-B: See page 56.
Color buttons: Use these to navigate BD-ROM
menus.
PROGRAM: Registers FM radio stations.
BOOKMARK (RDS): Create a BOOKMARK (page
:KHQ)0781(5LVVHOHFWHGVZLWFKHV
RDS information (page 72).
ZOOM (PTY)::LOO]RRPLQRU]RRPRXW:KHQ
this button is pressed while the FM tuner is
selected, the PTY value will switch.
INDEX: Slideshow playback (page 58).
Keylock function
You can set the keylock to prevent accidental
operations.
This function allows TVs compatible with
control function with HDMI to also perform a
Key Lock on the player.
Press and hold KEYLOCK for more than 2
seconds.
 Each time you perform this operation, the
function is activated or deactivated.
 If you try to operate the player while the
keylock function is set, LOCK lights on the
front panel display.
Before you start20
En
Before you start
1
Front panel
1
2
3
4
57
89 6
1Disc tray
2Operation buttons
1 (STANDBY/ON)
Switches the unit ON or OFF.
Note
If the power does not turn OFF, pressing the
1(STANDBY/ON) button for more than 5 seconds
reboots the unit and the operation becomes
possible.
$ (OPEN/CLOSE)
FUNCTION
Changes the input source or function.
When switching while viewing the display
window using the button on the front panel
1. The input source switches every time the
FUNCTION is pressed.
2. Select the desired input source and press
" (PLAY/PAUSE).
# (STOP)
+, (SKIP)
- TUNE + (Radio tuning)
3MIC
4PORTABLE
5" (PLAY/PAUSE)
6USB port
7Volume control
8Remote control sensor
Point the remote control to this, then
operate it within approximately 7 m. The
player may have trouble capturing remote
control signals if there is a fluorescent light
nearby. If this happens, move the player
away from the fluorescent light.
9Display Window
Before you start 21
En
Before you start
1
Rear panel
BCS-727/BCS-323
1 2 3 46 7 8 a c59 b
BCS-HW929/BCS-HF828/BCS-SB626/BCS-FS525
1 2 3 46 7 a c59 b8
1AC IN
Plug into the power source.
2SPEAKERS connectors
3Cooling Fan
4VIDEO OUT
5AUX IN (L/R)
6ADAPTER PORT
7Antenna Connector
8iPod
Connect to the furnished iPod cradle.
9OPTICAL IN 1/2
aHDMI OUT
bHDMI IN 1/2
cLAN port
Connecting22
En
Connecting
2
Chapter 2
Connecting
Assemble the speakers
Speaker setup for BCS-727
Preparing the speakers
1. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
Caution
 These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
 Do not connect any speakers other than those
supplied to this system.
 Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
2. Attach the non-skid pads to the base of
each speaker.
3. Mount the front/surround speaker.
1Pass the speaker cable through the
cable hole on the side of the base.
2Insert the lower cabinet to the base so
that the cable hole is positioned at the
backside.
3Fix the base to the lower cabinet from
the underside, using the four screws
(M4 x 16).
Connecting 23
En
Connecting
2
4Insert the upper cabinet to the lower
cabinet.
5Fix the upper cabinet and the lower
cabinet from the backside of the speaker
using the two screws (M4 x 12).
Caution
 Be careful not to tighten screws excessively.
If excessive force is used to tighten screws, the
threads of screw and/or nut may be damaged.
Use a middle-sized manual screwdriver during
assembly. Do not use power screwdrivers or
oversized screwdrivers that may exert excessive
force on the screws and nuts. Confirm that no
foreign matter is stuck to the base or the lower
cabinet during assembly. If the unit is assembled
with foreign matter stuck between the base and
lower cabinet, the unit may not be assembled
securely, resulting in tipping or falling.
 Do not stand on the speaker stand base of the tall
speaker to push or swing the speaker. The speaker
may fall and break, or someone may be injured.
Pay special attention to children.
Wall mounting the speaker for
BCS-727
The center speaker have a mounting hole
which can be used to mount the speaker on
the wall.
Before mounting
Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
Make sure that the wall you intend to mount
the speakers on is strong enough to support
them. Do not mount on plywood or soft surface
walls.
Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
Caution
 If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
 Pioneer is not responsible for any accidents or
damage that result from improper installation.
5 mm to 7 mm
Mounting screw
(not supplied)
5 mm
10 mm
Connecting24
En
Connecting
2
Additional notes on speaker
for BCS-727
Install the main front left and right speakers at
an equal distance from the TV.
Precautions:
The center speaker supplied with this system
are magnetically shielded. However, depending
on the installation location, color distortion
may occur if the speaker is installed extremely
close to the screen of a television set. If this
case happens, turn the power switch of the
television set OFF, and turn it ON after 15 min.
to 30 min. If the problem persists, place the
speaker system away from the television set.
The subwoofer is not magnetically shielded and
so should not be placed near a TV or monitor.
Magnetic storage media (such as floppy discs
and tape or video cassettes) should also not be
kept close to the subwoofer.
Do not attach the subwoofer to a wall or
ceiling. They may fall off and cause injury.
Positioning the system for
BCS-727
The following illustration shows an example
of positioning the system. Note that the
illustrations in these instructions differ from
the actual unit for explanation purposes. For
the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (
A
).
A
Front left speaker (L)/
B
Front right speaker (R):
Place the front speakers to the sides of the
monitor or screen and as flush with the screen
surface as possible.
C
Center speaker:
Place the center speaker below or in front of
the monitor or screen.
D
Surround left speaker (L)/
E
Surround right speaker (R):
Place these speakers behind your listening
position, facing slightly inwards.
F
Subwoofer:
The position of the subwoofer is not so
critical, because low bass sounds are not
highly directional. But it is better to place the
subwoofer near the front speakers. Turn it
slightly toward the center of the room to reduce
the wall reflections.
G
Unit
Caution
 Be careful to make sure children do not put their
hands or any objects into the *subwoofer duct.
*subwoofer duct: A hole for plentiful bass sound
on subwoofer cabinet (enclosure).
 Place the centre speaker at a safe distance from
the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/or property
damage.
 The speakers contain magnet parts, so color
irregularity may occur on the TV screen (CRT) or
PC monitor screen. Please use the speakers away
from the TV screen (CRT) or PC monitor screen.
Connecting 25
En
Connecting
2
Speaker setup for BCS-323
Preparing the speakers
1. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
Caution
 These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
 Do not connect any speakers other than those
supplied to this system.
 Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
2. Attach the non-skid pads to the base of
each speaker.
Wall mounting the speaker for
BCS-323
All speakers have a mounting hole which can
be used to mount the speaker on the wall.
Before mounting
Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
Make sure that the wall you intend to mount
the speakers on is strong enough to support
them. Do not mount on plywood or soft surface
walls.
Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
Caution
 If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
 Pioneer is not responsible for any accidents or
damage that result from improper installation.
5 mm
10 mm
5 mm to 7 mm
Mounting screw
(not supplied)
This hole is used to x the
unit to the speaker stand.
Caution: Do not use this hole
to mount on walls or ceilings.
The speaker may fall resulting
in injury.
Connecting26
En
Connecting
2
Additional notes on speaker
for BCS-323
Install the main front left and right speakers at
an equal distance from the TV.
Precautions:
The center speaker supplied with this system
are magnetically shielded. However, depending
on the installation location, color distortion
may occur if the speaker is installed extremely
close to the screen of a television set. If this
case happens, turn the power switch of the
television set OFF, and turn it ON after 15 min.
to 30 min. If the problem persists, place the
speaker system away from the television set.
The subwoofer is not magnetically shielded and
so should not be placed near a TV or monitor.
Magnetic storage media (such as floppy discs
and tape or video cassettes) should also not be
kept close to the subwoofer.
Do not attach the subwoofer to a wall or
ceiling. They may fall off and cause injury.
Positioning the system for
BCS-323
The following illustration shows an example
of positioning the system. Note that the
illustrations in these instructions differ from
the actual unit for explanation purposes. For
the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (
A
).
A
Front left speaker (L)/
B
Front right speaker (R):
Place the front speakers to the sides of the
monitor or screen and as flush with the screen
surface as possible.
C
Center speaker:
Place the center speaker below or in front of
the monitor or screen.
D
Surround left speaker (L)/
E
Surround right speaker (R):
Place these speakers behind your listening
position, facing slightly inwards.
F
Subwoofer:
The position of the subwoofer is not so
critical, because low bass sounds are not
highly directional. But it is better to place the
subwoofer near the front speakers. Turn it
slightly toward the center of the room to reduce
the wall reflections.
G
Unit
Caution
 Be careful to make sure children do not put their
hands or any objects into the *subwoofer duct.
*subwoofer duct: A hole for plentiful bass sound
on subwoofer cabinet (enclosure).
 Place the centre speaker at a safe distance from
the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/or property
damage.
 The speakers contain magnet parts, so color
irregularity may occur on the TV screen (CRT) or
PC monitor screen. Please use the speakers away
from the TV screen (CRT) or PC monitor screen.
Connecting 27
En
Connecting
2
Speaker setup for BCS-HW929
Preparing the speakers
1. Attach the non-skid pads to the base of
each speaker.
For front speaker:
Use the supplied adhesive to attach six
pads to the base (bottom) of speaker.
Non-skid pad
(for front)
Non-skid pad
(for front)
Affix to
three locations
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
large non-skid pads
2. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
Caution
 Do not connect any speakers other than those
supplied to this system.
 Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
 Please connect the speaker cable of subwoofer
(purple) to orange of the player.
 These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
Connecting28
En
Connecting
2
Wall mounting the speaker for
BCS-HW929
Before mounting
 Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
Make sure that the wall you intend to mount
the speaker on is strong enough to support
them. Do not mount on plywood or soft
surface walls.
 Mounting screws are not supplied. Use
screws suitable for the wall material and
support the weight of the speaker.
Caution
 If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
 Pioneer is not responsible for any accidents or
damage that result from improper installation.
1 Remove the base plates.
The base plates are held in position by the
XVHRIVLGHGWDSH:KLOHKROGLQJWKHOHJLQ
place, strongly press the base plate in the
direction indicated by the arrow to remove
the base plate. Be careful not to damage
the front speaker while doing this.
Base plate
Leg
2. Using the two screws removed in step 1,
fasten the wall mounting fixtures to the
speaker.
3. Using the two screws removed in step 1,
fasten the wall mounting fixtures to the
speaker.
4. Affix the supplied wire stays to the top of the
unit as shown and collect the cable there.
5. Mount on wall.
Press until a “click” is
heard.
:DOO
mounting
screws
(available
commercially)*
 :DOOPRXQWLQJVFUHZVDUHQRWLQFOXGHG3XUFKDVH
appropriate screws taking into consideration the
type of wall and the weight of the speaker system.
Open two holes in the wall 818 mm apart.
6 mm to 8 mm
Connecting 29
En
Connecting
2
Additional notes on speaker
for BCS-HW929
Install the front speaker below the TV, in the
center position.
Precautions:
Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker
wire touches the back panel it may cause the
power to cut off as a safety measure.
The front speaker and subwoofer are not
magnetically shielded and so should not be
placed near a TV or monitor. Magnetic storage
media (such as floppy discs and tape or video
cassettes) should also not be kept close to the
front speaker and subwoofer.
Do not attach the subwoofer to a wall or
ceiling. They may fall off and cause injury.
Positioning the system for
BCS-HW929
B
C
D
A
Pioneer logo
A
Front speaker
The front speaker should be installed so as to
reflect sound off the television screen, thus
SURGXFLQJWKH6RXQG:LQJ·VFKDUDFWHULVWLF
EUHDGWKRIVRXQG:KHQLQVWDOOLQJWKHVSHDNHU
orient the unit so that front speaker’s top
edge is pointed up, then bring it closer to the
television screen so that the Pioneer logo
is oriented as shown in the accompanying
illustration.
B
Subwoofer:
The position of the subwoofer is not so
critical, because low bass sounds are not
highly directional. But it is better to place
the subwoofer near the front speaker. Turn it
slightly toward the center of the room to reduce
the wall reflections.
C
Unit
D
Listening position
Caution
 Be careful to make sure children do not put their
hands or any objects into the *subwoofer duct.
*subwoofer duct: A hole for plentiful bass sound
on subwoofer cabinet (enclosure).
 The speakers contain magnetic parts, so colour
irregularity may occur on the TV screen (CRT) or
PC monitor screen. Please use the speakers away
from the TV screen (CRT) or PC monitor screen.
 Do not stand on the speaker, nor hang it from
another object, since it may fall or be otherwise
damaged. Be especially careful if infants are
present, and do not allow them to hold to or lean
on the unit.
Connecting30
En
Connecting
2
Speaker setup for BCS-HF828
Preparing the speakers
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
large non-skid pads
Large non-skid-pads
For front speakers:
Assembling the speaker stands and securing
your front speakers.
For horizontal installation:
Caution
1. Align the rotation stop lug with the hole in
the base.
Rotation stop
lug
2. Fasten the speaker to the base use the
horizontal mounting screw from the back
side of the base.
Horizontal mount
screw
For vertical installation
Caution
1. Align the vertical mounting stay with the
hole in the base.
2. Fasten the vertical mount stay to the base
using the vertical mount bolt and hex nut.
Be sure the hex nut fits into the hexagonal
groove in the bottom of the base.
Vertical mount screw Vertical mount
hexnut
Connecting 31
En
Connecting
2
3. Affix the seal on the screw head.
Seal
4. Align the speaker’s rotation stop lug with
the hole in the vertical stay.
Rotation
stop lug
5. Fasten the speaker to the vertical stay, using
the vertical mount screw.
Vertical mount screw
6. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
Caution
 Do not connect any speakers other than those
supplied to this system.
 Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
 Please connect the speaker cable of subwoofer
(purple) to orange of the player.
 These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
Connecting32
En
Connecting
2
Wall mounting the speakers
for BCS-HF828
Before mounting
 Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
Make sure that the wall you intend to mount
the speakers on is strong enough to support
them. Do not mount on plywood or soft
surface walls.
 Mounting screws are not supplied. Use
screws suitable for the wall material and
support the weight of the speaker.
Caution
 If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
 Pioneer is not responsible for any accidents or
damage that result from improper installation.
1. Use the vertical mounting screw to fasten
the wall mounting fixture to the speaker
system.
2. Attach to wall.
 :DOOPRXQWLQJVFUHZVDUHQRWLQFOXGHG
Purchase appropriate screws taking into
consideration the type of wall and the
weight of the speaker system.
Open two holes in the wall 95 mm apart.
When mounting the unit on speaker stand
Use the accessory bracket when mounting the
unit on any speaker stand or base other than
those provided.
Use M5 screws for installation. Mounting
screws are not provided.
Follow the instructions accompanying your
selected speaker stand or base.
:DOOPRXQWLQJ
screws
(available
commercially)*
6 mm to 8 mm
Connecting 33
En
Connecting
2
Additional notes on speaker
for BCS-HF828
Install the main front left and right speakers at
equal distance from the TV.
Precautions:
Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker
wire touches the back panel it may cause the
power to cut off as a safety measure.
The front speakers and subwoofer are not
magnetically shielded and so should not be
placed near a TV or monitor. Magnetic storage
media (such as floppy discs and tape or video
cassettes) should also not be kept close to the
front speakers and subwoofer.
Do not attach the subwoofer to a wall or
ceiling. They may fall off and cause injury.
Positioning the system for
BCS-HF828
The following illustration shows an example
of positioning the system. Note that the
illustrations in these instructions differ from
the actual unit for explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (
A
).
A
BC
D
E
A
A
A
Front left speaker (L)/
B
Front right speaker (R):
Can be mounted vertically or horizontally.
C
Subwoofer:
The position of the subwoofer is not so
critical, because low bass sounds are not
highly directional. But it is better to place the
subwoofer near the front speakers. Turn it
slightly toward the center of the room to reduce
the wall reflections.
D
Unit
E
Listening position
Caution
 Be careful to make sure children do not put their
hands or any objects into the *subwoofer duct.
*subwoofer duct: A hole for plentiful bass sound
on subwoofer cabinet (enclosure).
 The speakers contain magnetic parts, so colour
irregularity may occur on the TV screen (CRT) or
PC monitor screen. Please use the speakers away
from the TV screen (CRT) or PC monitor screen.
Connecting42
En
Connecting
2
Connecting to Your TV
Make one of the following connections,
depending on the capabilities of your existing
equipment.
 HDMI connection (page 42)
 Video connection (page 43)
Note
 Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the player. Use only one of the connections
described in this manual.
 Please refer to the manuals of your TV, stereo
system or other devices as necessary to make the
best connections.
 Make sure the player is connected directly to the
TV. Tune the TV to the correct video input channel.
 Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
HDMI connection
If you have a HDMI TV or monitor, you can
connect it to this player using a HDMI cable
(High Speed HDMI™ Cable). Connect the
HDMI terminal on the player to the HDMI
terminal on a HDMI compatible TV or monitor.
Rear of the unit
TV
HDMI
cable
Set the TV’s source to HDMI (refer to TV’s
Operating Instructions).
Connecting the player and the TV using the
HDMI cable alone does not enable you to hear
the audio from the devise. Please also connect
by either the optical cable (page 45) or the
analog audio cable (page 44).
When connected to a DVI device
 It is not possible to connect DVI devices
(computer displays, for example) that are
not compatible with HDCP. HDCP is a
specification to protect audiovisual content
across the DVI/HDMI interface.
 No audio signals are output. Connect using
an audio cable, etc.
 This player is designed for connection with
+'0,FRPSDWLEOHGHYLFHV:KHQFRQQHFWHG
to a DVI device, it may not operate properly
depending on the DVI device.
Connecting 43
En
Connecting
2
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV
to send the audio stream to HDMI OUT of this
player.
To use this function:
- Your TV must support the ARC function.
- The setting method of ARC may differ
depending on the TV. For details about ARC
function, refer to your TV manual.
- You must use the HDMI cable (High Speed
HDMI™ Cable).
- You must connect with the HDMI IN of TV
that supports the ARC function using the
HDMI OUT on this player.
- You can connect only one Home Theater to
TV compatible with ARC.
- The ARC function does not warrant that the
function works in all cases even if the above
conditions are satisfied.
-:KHQ\RXXVHWKH$5&IXQFWLRQ&(&
(Consumer Electronics Control) may work. If
you do not want to use CEC, you can stop it
work by setting [HDMI Control O] on Home
Menu. In this case, it is needed to connect
TV and this player by an optical cable to send
the audio stream to this player. Power on the
unit when using CEC function. CEC does not
operate during Standby mode.
Video connection
Connect the VIDEO OUT terminal on the player
to the video in terminal on the TV using a video
cable. You can hear the sound through the
system’s speakers.
Rear of the unit
TV
Video cable
Connecting44
En
Connecting
2
Antenna connection
Connect the supplied antenna for listening to
the radio.
Rear of the unit
Note
 After connecting the FM wire antenna, keep it as
horizontal as possible. Be sure to fully extend the
FM wire antenna.
Connections with
external device
AUX connection
You can enjoy the sound from an external
component through the speakers of this
system.
Connect the analog audio output terminals of
your component into the AUX L/R (INPUT) on
this unit. And then select the [AUX] option by
pressing FUNCTION and ENTER.
To the audio output
terminals of your
component
(TV, VCR, etc.)
Rear of the unit
:KLWH
Red
Connecting 45
En
Connecting
2
PORTABLE IN connection
You can enjoy the sound from your portable
audio player through the speakers of this
system.
Connect the headphones (or line out ) terminal
of the portable audio player into the PORTABLE
socket of this unit. And then select the
[Portable In] option by pressing FUNCTION and
ENTER.
MP3 Player, etc...
OPTICAL IN 1/2 connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output terminal of your
component into the OPTICAL IN 1 or 2 terminal
on the unit. And then select the [Optical IN 1/2]
option by pressing FUNCTION and ENTER.
To the digital optical
output terminal of
your component
Rear of the unit
Connecting46
En
Connecting
2
HDMI IN 1/2 connection
You can enjoy the pictures and sound from
your component through this connection.
Connect the HDMI OUT terminal of your
component into the HDMI IN 1 or 2 terminal
on this unit. And then select the [HDMI IN 1/2]
option by pressing FUNCTION and ENTER.
To the HDMI OUT
terminal of your
component
(set-top box, digital
satellite receiver,
video game
machine, etc.)
Rear of the unit
Note
 You cannot change the video resolution in the
HDMI IN 1/2 mode. Change the video resolution of
the connected component.
 If the video output signal is abnormal when your
personal computer is connected to HDMI IN 1/2
terminal, change the resolution of your personal
computer to 576p, 720p, 1080i or 1080p.
 The video signal from the HDMI input cannot be
output from the component or composite video
outputs.
Connecting optional
Bluetooth® ADAPTER
:KHQWKHBluetooth ADAPTER (Pioneer Model
No. AS-BT100 or AS-BT200) is connected to
this unit, a product equipped with Bluetooth
wireless technology (portable cell phone,
digital music player, etc.) can be used to listen
to music wirelessly.
Connect a Bluetooth ADAPTER to the
ADAPTER PORT terminal on the rear panel.
*For instructions on playing the Bluetooth
wireless technology device, see Pairing the
Bluetooth ADAPTER and Bluetooth wireless
technology device on page 73.
Bluetooth® ADAPTER
Rear of the unit
Note
 Do not move the unit while the Bluetooth ADAPTER
is connected. Doing so could cause damage or
faulty contact.
Connecting 47
En
Connecting
2
Connecting to your
Home Network
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel or the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such
as BD-LIVE interactivity and Online content
services.
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not
subject to radio frequency interference.
Please refer to the documentation for your
network device for further instructions.
Connect the player’s LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable.
Note
 :KHQSOXJJLQJRUXQSOXJJLQJWKH/$1FDEOHKROG
WKHSOXJSRUWLRQRIWKHFDEOH:KHQXQSOXJJLQJ
do not pull on the LAN cable but unplug while
pressing down on the lock.
 Do not connect a modular phone cable to the LAN
port.
 Since there are various connection configurations,
please follow the specifications of your
telecommunication carrier or internet service
provider.
 If you want to access content from PCs or DLNA
servers, this player must be connected to the same
local area network with them via a router.
Rear of the unit
Router
Broadband
service
PC and/or DLNA certified server
Connecting48
En
Connecting
2
Wireless network connection
Another connection option is to use an
Access Point or a wireless router. The network
configuration and connection method may vary
depending on the equipment in use and the
network environment.
This player is equipped with an IEEE 802.11n
(Single band, 2.4 GHz band) wireless module,
which also supports the 802.11b/g standards.
For the best wireless performance, we
UHFRPPHQGXVLQJD,(((QFHUWLILHG:L
Fi network (access point or wireless router).
Wireless
Communication
PC and/or
DLNA certified server
Access Point or
:LUHOHVV5RXWHU
Broadband
service
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection
from this player to your home network’s router
or cable/DSL modem is always the best option.
If you do chose to use the wireless option, note
that performance can sometimes be affected
by other electronic devices in the home.
Wireless network setup
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Setup]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless
router is required before connecting the player
to the network.
Preparation
Before setting the wireless network, you need
to:
- connect the broadband internet to the
wireless home network.
- set the access point or wireless router.
- note the SSID and security code of the
network.
1. Select [Initial Setup] A[Network] A
[Interface] A[Wireless] and press ENTER.
2. Select [Initial Setup] A[Network] A
[Wireless Setting] A[Next Screen] and
press ENTER.
3. Select [Yes] and press ENTER to continue.
The new connection settings reset the
current network settings.
4. [Wireless Setting] menu is displayed.
Use / to select [Scan]. Then select [Next]
using the / and press ENTER.
5. The player scans the all available access
points or wireless routers within range and
display them as a list. Use / to select an
access point or wireless router on the list,
and then press ENTER.
If you have security on your access point
RUZLUHOHVVURXWHUYHULI\WKDWWKH:(3RU
:3$NH\WKDWZDVHQWHUHGLQWRWKHSOD\HU
matches the router’s information exactly.
You need to input the security code as
necessary.
6. Use the direction button, select the
password, the button upon the Clear can
change it to capital letter, lower case or
symbol. Press the Enter end it. Select the
Next button.
7. If it connects success, it will display
connection success and IP is obtained.
Connecting 49
En
Connecting
2
Note
y:(3VHFXULW\PRGHJHQHUDOO\KDYHNH\V
available on an access point or wireless
router’s setting. If your access point or wireless
URXWHUXVH:(3VHFXULW\HQWHUWKHVHFXULW\
code of the key “No.1” to connect on your home
network.
yAn Access Point is a device that allows you to
connect to your home network wirelessly.
[Scan] – The player scans the all available
access points or wireless routers within
range and display them as a list.
[Manual] – Your access point may not
be broadcasting its access point name
(SSID). Check your router settings through
your computer and either set your router
to broadcast SSID, or manually enter the
access point name (SSID) in [Manual].
[Auto] – If your access point or wireless
router that supports the Push Button
Configuration method, select this option
and press the Push Button on your access
point or wireless router within 120 counts.
You do not need to know the access point
name (SSID) and security code of your
access point or wireless router.
Note
yIf there is no DHCP server on the network and
you want to set the IP address manually, Please
refer to “Setting the IP address”. (Page 80)
WPS setup
(Wi-Fi Protected Setup)
WPS connection setting
:36LVDEEUHYLDWLRQRI:L)L3URWHFWHG6HWXS
$VWDQGDUGHVWDEOLVKHGE\WKH:L)L$OOLDQFH
industry group for a function allowing settings
UHODWHGWRLQWHUFRQQHFWLRQRI:36FRPSDWLEOH
wireless LAN devices and encryption to be
made with simple operations.
This unit supports push-button configuration
and PIN code configuration.
PBC (Push Button Conguration)
Connection settings are made automatically
VLPSO\E\SUHVVLQJWKH:36EXWWRQVRQWKH
:36FRPSDWLEOHZLUHOHVV/$1GHYLFH7KLVLV
the simplest way of making the settings, and
LVSRVVLEOHZKHQWKH:36FRPSDWLEOHZLUHOHVV
/$1GHYLFHLVHTXLSSHGZLWK:36EXWWRQ
PIN Input
Connection settings are made by inputting the
8-digit PIN code shown on the main display to
the access point to which you selected. Follow
the instructions shown in Connecting using
PIN code configuration on the right.
:KHQSHUIRUPLQJZLUHOHVVVHWWLQJVVHW
[Initial Setup] A[Network] A[Interface] to
[Wireless].
1. Press HOME MENU.
The HOME MENU screen is displayed.
2. Use cursor buttons to select [Initial
Setup] and press ENTER.
The Initial Setup screen is displayed.
3. Select [Initial Setup] A [Network] A
[Wireless Setting] A [Next Screen] and
press ENTER.
A confirmation screen is displayed.
4. Use / to select Yes, then press
ENTER.
The Wireless Setting screen is displayed.
5. Use / to select Auto, then press
ENTER.
The WPS Setting screen is displayed.
6. Use / to switch between [PBC] or
[PIN] screens.
:KHQFRQQHFWLQJXVLQJ3%&JRWRVWHS
:KHQFRQQHFWLQJXVLQJ3,1JRWRVWHS
Connecting50
En
Connecting
2
7. When connecting using PBC (Push
Button), on the [PBC] screen use /
to select NEXT, then press ENTER.
7KHQSUHVVWKH:36EXWWRQRQWKHDFFHVV
point within 120 seconds.
8. When connecting using PIN confirm
the PIN Code on the [PIN] screen. Use
cursor / to select NEXT, then press
ENTER.
9. Enter into the access point the PIN
Code that you confirmed in step 8
above.
The PIN Code input method differs
depending on the LAN device used. For
details, consult the operating instructions
accompanying your LAN device.
Notes on Network Connection:
 Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cord of the home
network router or cable modem. Then power
on and/or connect the power cord again.
 Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
 Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
 The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided by
our company, and our company is not
responsible for their functionality or
continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
 Some internet contents may require a higher
bandwidth connection.
 Even if the player is properly connected and
configured, some internet contents may
not operate properly because of internet
congestion, the quality or bandwidth of your
internet service, or problems at the provider
of the content.
 Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your broadband Internet connection.
 Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
 A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the player.
 You must use a Router to use xDSL service.
Connecting 51
En
Connecting
2
 ADSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in this
player or you may be limited to the number
of devices you can connect at the same time.
(If your ISP limits subscription to one device,
this player may not be allowed to connect
when a PC is already connected.)
 The use of a “Router” may not be allowed
or its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
 The wireless network operate at 2.4 GHz
radio frequencies that are also used by
other household devices such as cordless
telephone, Bluetooth®devices, microwave
oven, and can be affected by interference
from them.
 Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
 For the purpose of the better transmission,
placing the player from the access point as
close as possible.
 In some instances, placing the access point
or wireless router at least 0.45 m above the
floor may improve the reception.
 Move closer to the access point if possible
or re-orient the player so there is nothing
between it and the access point.
 The reception quality over wireless depends
on many factors such as type of the access
point, distance between the player and
access point, and the location of the player.
 Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
USB device connection
This player can play movie, music and photo
files contained in the USB device.
1. Insert a USB device to the USB port until it
fits into place.
Note
 This player supports USB device/external HDD
formatted in FAT16, FAT32 and NTFS when
accessing files (music, photo, movie). However, for
BD-LIVE and Audio CD recording, only FAT16 and
FAT32 formats are supported. Use the USB device/
external HDD formatted in either FAT16 or FAT32
when using BD-LIVE and Audio CD recording.
 The USB device can be used for the local storage
for enjoying BD-LIVE discs with Internet.
 This unit can support up to 8 partitions of the USB
device.
 Do not extract the USB device during operation
(play, etc.).
 A USB device which requires additional program
installation when you have connected it to a
computer, is not supported.
 USB device: USB device that supports USB1.1 and
USB2.0.
 Movie, music and photo files can be played. For
details of operations on each file, refer to relevant
pages.
 Regular back up is recommended to prevent data
loss.
 If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
 Some USB device may not work with this unit.
 Digital camera and mobile phone are not
supported.
 USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
 If more than one USB device is connected, the
number displayed for the USB device may change
depending on the type of device connected or
circumstance. To confirm USB device number, go
to [HOME MENU] A[Home Media Gallery].
Getting Started52
En
Getting Started
3
Capter 3
Getting Started
Making settings using
the Setup Navigator
menu
Be sure to perform these settings when using
the player in the following situations.
 :KHQ\RXXVHWKHSOD\HUIRUWKHILUVWWLPH
 After Initial Setup format.
 After updating the player’s software.
Caution
 Before turning on the power, check that the
connections between the player and other devices
are correct. Also, turn on the power of the devices
connected to the player before turning on the
player’s power.
 :KHQXVLQJD3LRQHHU)ODW6FUHHQ79RUIURQW
projector compatible with the Control function,
set Control to On on the connected device before
turning on the player’s power.
Note
 :KHQD3LRQHHU)ODW6FUHHQ79RUIURQWSURMHFWRU
compatible with the Control function is connected
to the player using an HDMI cable, the player is
automatically set to the optimum picture quality for
the connected device.
1. Turn on the TV’s power and switch the
input.
See the TV’s operating instructions for the
details of operating the TV.
2. Turn on the player’s power.
Press 1STANDBY/ON.
Check that the Setup Navigator menu is
displayed.
If the Setup Navigator menu is not
displayed
Press HOME MENU to display the
Home Menu, select Initial Setup ASetup
Navigator AStart, then press ENTER.
3. Start Setup Navigator.
Press ENTER.
ySetup Navigator starts.
4. Select the OSD language.
Use / to select, then press ENTER.
:KHQD3LRQHHU)ODW6FUHHQ79WKDW
is compatible with Control function is
connected to this player’s HDMI OUT
terminal, language settings are imported
from the Pioneer Flat Screen TV’s language
settings before Setup Navigator begins.
5. Select the appropriate output resolution
for the connected TV.
Use / to select, then press ENTER.
6. Select the appropriate aspect for the
connected TV.
Use / to select, then press ENTER.
7. Close the Setup Navigator menu.
Press ENTER.
ySetup Navigator finishes and the setting
is stored.
yPress RETURN to go back to the
previous screen.
Getting Started 53
En
Getting Started
3
Operating the TV with
the player's remote
control
:KHQWKHPDQXIDFWXUHUFRGHIRU\RXUEUDQG
of TV is set on the player's remote control, the
TV can be operated using the player's remote
control.
Caution
 For some models it may not be possible to operate
the TV with the player's remote control, even for TVs
of brands listed on the manufacturer code list.
 The setting may be restored to the default after the
batteries are replaced. If this happens, reset it.
1. Input the 2-digit manufacturer code.
Press the number buttons (0 to 9) to input
the code while pressing TV CONTROL 1.
Note
yThe factory default setting is 00 (PIONEER).
yIf you make a mistake when inputting the code,
release TV CONTROL 1 then start over from the
beginning.
y:KHQWKHUHDUHPXOWLSOHFRGHVIRUD
manufacturer, try inputting them in the
indicated order until the TV can be operated.
2. Check that the TV can be operated.
Operate the TV using TV CONTROL.
1 – Press to turn the TV's power on and off.
INPUT SELECT – Press to switch the TV's
input.
CH +/– –Press to select the TV channel.
VOL +/– –Press to adjust the volume.
Getting Started54
En
Getting Started
3
TV preset code list
Manufacturer Code(s)
PIONEER 00, 31, 32, 07, 36,
42, 51, 22
ACURA 44
ADMIRAL 31
AIWA 60
AKAI 32, 35, 42
AKURA 41
ALBA 07, 39, 41, 44
AMSTRAD 42, 44, 47
ANITECH 44
ASA 45
ASUKA 41
AUDIOGONIC 07, 36
BASIC LINE 41, 44
BAUR 31, 07, 42
BEKO 38
BEON 07
BLAUPUNKT 31
BLUE SKY 41
BLUE STAR 18
BPL 18
BRANDT 36
BTC 41
BUSH 07, 41, 42, 44, 47, 56
CASCADE 44
CATHAY 07
CENTURION 07
CGB 42
CIMLINE 44
CLARIVOX 07
CLATRONIC 38
CONDOR 38
CONTEC 44
CROSLEY 32
CROWN 38, 44
CRYSTAL 42
CYBERTRON 41
DAEWOO 07, 44, 56
DAINICHI 41
DANSAI 07
DAYTON 44
DECCA 07, 48
DIXI 07, 44
DUMONT 53
ELIN 07
ELITE 41
ELTA 44
EMERSON 42
ERRES 07
FERGUSON 07, 36, 51
FINLANDIA 35, 43, 54
FINLUX 32, 07, 45, 48, 53,
54
FIRSTLINE 40, 44
FISHER 32, 35, 38, 45
FORMENTI 32, 07, 42
FRONTECH 31, 42, 46
FRONTECH/PROTECH 32
FUJITSU 48
FUNAI 40, 46, 58
GBC 32, 42
GE 00, 01, 08, 07, 10, 11,
17, 02, 28, 18
GEC 07, 34, 48
GELOSO 32, 44
GENERAL 29
GENEXXA 31, 41
GOLDSTAR 10, 23, 21, 02,
07, 50
GOODMANS 07, 39, 47, 48,
56
GORENJE 38
GPM 41
GRAETZ 31, 42
GRANADA 07, 35, 42, 43,
48
GRADIENTE 30, 57
GRANDIN 18
GRUNDIG 31, 53
HANSEATIC 07, 42
HCM 18, 44
HINARI 07, 41, 44
HISAWA 18
HITACHI 31, 33, 34, 36, 42,
43, 54, 06, 10, 24, 25, 18
HUANYU 56
HYPSON 07, 18, 46
ICE 46, 47
IMPERIAL 38, 42
INDIANA 07
INGELEN 31
INTERFUNK 31, 32, 07, 42
INTERVISION 46, 49
ISUKAI 41
ITC 42
ITT 31, 32, 42
JEC 05
JVC 13, 23
KAISUI 18, 41, 44
KAPSCH 31
KENDO 42
KENNEDY 32, 42
KORPEL 07
KOYODA 44
LEYCO 07, 40, 46, 48
LIESENK&TTER 07
LOEWE 07
LUXOR 32, 42, 43
M-ELECTRONIC 31, 44, 45,
54, 56, 07, 36, 51
MAGNADYNE 32, 49
MAGNAFON 49
MAGNAVOX 07, 10, 03, 12,
29
MANESTH 39, 46
MARANTZ 07
MARK 07
MATSUI 07, 39, 40, 42, 44,
47, 48
MCMICHAEL 34
MEDIATOR 07
MEMOREX 44
METZ 31
MINERVA 31, 53
MITSUBISHI 09, 10, 02, 21,
31
MULTITECH 44, 49
NEC 59
NECKERMANN 31, 07
NEI 07, 42
NIKKAI 05, 07, 41, 46, 48
NOBLIKO 49
NOKIA 32, 42, 52
NORDMENDE 32, 36, 51,
52
OCEANIC 31, 32, 42
ORION 32, 07, 39, 40
OSAKI 41, 46, 48
OSO 41
OSUME 48
OTTO VERSAND 31, 32, 07,
42
PALLADIUM 38
PANAMA 46
PANASONIC 31, 07, 08, 42,
22
PATHO CINEMA 42
PAUSA 44
PHILCO 32, 42
PHILIPS 31, 07, 34, 56, 68
PHOENIX 32
PHONOLA 07
PROFEX 42, 44
PROTECH 07, 42, 44, 46, 49
QUELLE 31, 32, 07, 42, 45,
53
R-LINE 07
RADIOLA 07
RADIOSHACK 10, 23, 21,
02
RBM 53
RCA 01, 10, 15, 16, 17, 18,
61, 62, 09
REDIFFUSION 32, 42
REX 31, 46
ROADSTAR 41, 44, 46
SABA 31, 36, 42, 51
SAISHO 39, 44, 46
SALORA 31, 32, 42, 43
SAMBERS 49
SAMSUNG 07, 38, 44, 46,
69, 70
SANYO 35, 45, 48, 21, 14,
91
SBR 07, 34
SCHAUB LORENZ 42
SCHNEIDER 07, 41, 47
SEG 42, 46
SEI 32, 40, 49
SELECO 31, 42
SHARP 02, 19, 27, 67, 90
SIAREM 32, 49
SIEMENS 31
SINUDYNE 32, 39, 40, 49
SKANTIC 43
SOLAVOX 31
SONOKO 07, 44
SONOLOR 31, 35
SONTEC 07
SONY 04
SOUNDWAVE 07
STANDARD 41, 44
STERN 31
SUSUMU 41
SYSLINE 07
TANDY 31, 41, 48
TASHIKO 34
TATUNG 07, 48
TEC 42
TELEAVIA 36
TELEFUNKEN 36, 37, 52
TELETECH 44
TENSAI 40, 41
THOMSON 36, 51, 52, 63
THORN 31, 07, 42, 45, 48
TOMASHI 18
TOSHIBA 05, 02, 26, 21, 53
TOWADA 42
ULTRAVOX 32, 42, 49
UNIDEN 92
UNIVERSUM 31, 07, 38, 42,
45, 46, 54
VESTEL 07
VICTOR 13
VOXSON 31
WALTHAM 43
WATSON 07
WATT RADIO 32, 42, 49
WHITE WESTINGHOUSE 07
YOKO 07, 42, 46
ZENITH 03, 20
Playback 55
En
Playback
4
Chapter 4
Playback
Playing discs or les
This section describes the player's main
operations.
For the types of discs and files that can be
played, see page 11. Video, image and audio
files recorded on discs are played with the
Home Media Gallery (page 64).
1. Press 1 STANDBY/ON to turn on the
power.
Turn the TV's power on and switch its input
beforehand.
2. Press $ OPEN/CLOSE to open the disc
tray and load the disc.
Note
yLoad the disc with the printed side facing up.
ySeveral dozen seconds are required to read
the disc. Once reading is completed, the type
of disc is displayed on the player's front panel
display.
y:KHQD%'ZLWKXVDJHUHVWULFWLRQVVHWE\D%'
recorder is loaded, the PIN code input screen
appears. In this case, input your PIN code.
3. Press PLAY to play the disc.
yTo pause, press !PAUSE during playback.
yTo stop, press #STOP during playback.
Note
ySome discs start playing automatically when
the disc tray is closed.
yDVD-Video discs have parental lock features.
Input the password registered in the player's
settings to unlock the parental lock. For details,
see page 82.
If the disc menu is displayed
For some discs, the disc menu is displayed
automatically when playback starts. The
contents of the disc menu and the way to
operate depend on the disc.
Resuming playback from where it was
stopped (resume playback function)
y:KHQ#STOP is pressed during
playback, the point at which the disc
VWRSSHGLVVWRUHGLQWKHPHPRU\:KHQ
PLAY is pressed after that, playback
resumes from that point.
yTo cancel the resume playback function,
press #STOP while playback is stopped.
Note
yThe resume playback function is canceled
automatically in the following cases:
–:KHQWKHGLVFWUD\LVRSHQHG
–:KHQWKHILOHOLVWZLQGRZLVVZLWFKHG
–:KHQWKHSRZHULVWXUQHGRII)RU%'V
and DVDs this does not cancel the resume
playback function.)
y:KHQ\RXZDQWWRFRQWLQXHSOD\EDFNIURPD
position you specify to be played next time, see
Continuing playback from a specified position
(Continued Viewing Playback) on page 63.
yThe resume playback function cannot be used
for some discs.
Playback56
En
Playback
4
Forward and reverse scanning
During playback, press )REV or
*FWD.
yThe scanning speed switches each time
the button is pressed. The speed steps
depend on the disc or file (the speed is
displayed on the TV screen).
To resume normal playback
Press PLAY.
Playing specic chapters,
tracks or les
During playback, input the number
of the chapter/track/file you want to
select.
yUse the number buttons (0 to 9) to input
the number, then press ENTER.
yPress CLEAR to clear the values you have
input.
Skipping content
During playback, press + or ,.
y:KHQ, is pressed, the playback
skips ahead to the beginning of the next
chapter/track/file.
y:KHQ+ is pressed while a video or
audio file is playing, the playback skips
back to the beginning of the currently
playing chapter/track/file. Press twice to
skip back to the beginning of the previous
chapter/track/file.
y:KHQ+ is pressed while an image
file is playing, playback returns to the
previous file.
Playing in slow motion
While playback is paused, press and
hold -// or 0/..
yThe speed switches each time the button
is pressed (the speed is displayed on the
TV screen).
To resume normal playback
Press PLAY.
Step forward and step reverse
While playback is paused, press -//
or 0/..
yThe picture moves a step forward or
reverse each time the button is pressed.
To resume normal playback
Press PLAY.
Playing a specic section
within a title or track
repeatedly (A-B Repeat)
Use this procedure to play a specific section
within a title or track repeatedly.
1 During playback, press A-B to select the
starting point.
yA- is displayed on the TV screen.
2. During playback, press A-B to select the
ending point.
yA-B Repeat playback starts.
To cancel A-B Repeat play
yPress A-B during the A-B Repeat play.
Note
yA-B Repeat play is canceled in the following
cases:
–:KHQ\RXVHDUFKRXWVLGHRIWKHUHSHDW
range.
–:KHQ\RXVWDUWRWKHU5HSHDW3OD\RU
Random Play.
Playing repeatedly
(Repeat Play)
Use this procedure to play the currently playing
disc, title, chapter, track or file repeatedly.
During playback, press REPEAT.
yEach time you press REPEAT the type of
repeat modes changes as shown below.
BD
Current chapter A Current title
DVD
Current chapter A Current title A All
titles
CD/Video le/Audio le/Image le
Current track/file A All tracks/All files in
folder
Playback 57
En
Playback
4
To cancel Repeat Play
yPress REPEAT several times during
Repeat Play.
Note
yRepeat Play is canceled in the following cases:
–:KHQ\RXVHDUFKRXWVLGHWKHUHSHDWUDQJH
–:KHQ\RXVWDUWRWKHU5HSHDW3OD\RU
Random Play.
Playing in the desired order
(Programmed Play)
1 During playback, press PROGRAM.
yThe program screen is displayed.
2. Select the program number.
Use / to select, then press ENTER.
3. Select the title you want to play.
Use / to select, then press .
4. Select the chapter you want to play.
Use / to select, then press ENTER.
5. Press PLAY.
yPlayback starts.
Editing the program
1. Select the program number you want to
edit, then press ENTER.
2. Select title/chapter, then press ENTER.
Deleting the program
Select the program number you want to
delete, then press CLEAR.
yTo delete all the programs, press
RETURN.
Note
y:KHQ\RXXVHDXGLR&'VIRU3URJUDPPHG3OD\
enter the track number in step 3.
yThis function does not work with BDs.
Making bookmarks
You can make bookmarks on the video
currently playing and play back the scene later.
During playback, press BOOKMARK.
yThe bookmark is made.
yMaximum number of bookmarks are 12.
Playing the bookmarked scene
1. Press and hold BOOKMARK for a few
seconds.
yThe list of bookmarks is displayed.
2. Select the bookmark you want to play.
Use / to select, then press ENTER.
Deleting the bookmark
Select the bookmark you want to
delete, then press CLEAR.
yBookmarks may not be allowed to make
for some discs.
yBookmarks are canceled in the following
cases:
–:KHQWKHSOD\HUVSRZHUWXUQHGRII
–:KHQWKHGLVFWUD\LVRSHQHG
Zoom
During playback, press ZOOM.
yEach time you press ZOOM, the zoom
level changes as shown below.
Zoom 2x A Zoom 3x A Zoom 4x A
Zoom 1/2 A Zoom 1/3 A Zoom 1/4 A
Normal (not displayed)
Note
yThis function does not work with some discs.
Playback58
En
Playback
4
Playing photos as slideshows
This function plays the photos, switching them
automatically.
During playback, press INDEX.
yDisplay the thumbnail of image files. The
maximum number is 12 at once.
yIf you select one of the image and press
ENTER, slideshow will start from the
image you selected.
Rotating/inverting photos
:KHQDVOLGHVKRZLVSOD\LQJRUSDXVHGWKH
display switches as shown below when the /
/ / buttons are pressed.
button: Rotates 90° clockwise
button: Rotates 90° counterclockwise
button: Flips horizontally
button: Flips vertically
Switching the camera angles
For BD-ROM and DVD-Video discs on which
multiple angles are recorded, the angles can
be switched during playback.
During playback, press ANGLE.
yThe current angle and total number of
recorded angles are displayed on the TV
screen.
To switch the angles, press ANGLE again.
yThe angles can also be switched by
selecting Angle from the TOOLS menu.
yIf the angles are not switched when
ANGLE is pressed, switch them from the
disc menu screen.
Switching the subtitles
For discs or files on which multiple subtitles
are recorded, the subtitles can be switched
during playback.
Caution
yThe subtitles cannot be switched for discs
recorded by a DVD or BD recorder. Also refer to
the operating instructions for the device used
for recording.
During playback, press SUBTITLE.
yThe current subtitle and total number of
recorded subtitles are displayed on the
TV screen.
To switch the subtitle, press SUBTITLE
again.
yThe subtitles can also be switched by
selecting Subtitle from the TOOLS menu.
yIf the subtitles are not switched when
SUBTITLE is pressed, switch them from
the disc menu screen.
Turning the subtitles off
Press SUBTITLE several times or select
Subtitle from the TOOLS menu to
switch the setting to Off.
About displaying external subtitle
files while playing DivX media files
In addition to the subtitles recorded in DivX
media files, this player also supports the
display of external subtitle files. If a file has the
same name as that of a DivX media file aside
from the file extension and the extension is one
of the extensions listed below, the file is treated
as an external subtitle file. Note that DivX
media files and external subtitle files must be
located in the same folder.
Only one external subtitle file can be displayed
on this player. Use a computer, etc., to delete
any external subtitle files you do not want to
display from the disc.
Note
yDepending on the file, the external subtitles
may not be displayed properly.
Playback 59
En
Playback
4
Switching the audio
For discs or files on which multiple audio
streams/channels are recorded, audio streams/
channels can be switched during playback.
During playback, press AUDIO.
yThe current audio and total number of
recorded audio streams are displayed on
the TV screen. To switch the audio, press
AUDIO again.
yThe audio can also be switched by
selecting Audio from the TOOLS menu.
yIf the audio is not switched when AUDIO
is pressed, switch it from the disc menu
screen.
Switching the CD/SACD
playback area
1. Select the area you want to play.
In the stop mode, press CD/SACD. The
playback area switches on the front panel
display window each time the button is
pressed.
[CD AREA] A[SACD 2CH] A[SACD MCH]
A (back to beginning)
yDuring playback, press # twice to cancel
continuous play before selecting the
playback area.
2. Open the disc tray.
Press the $OPEN/CLOSE button.
3 Close the disc tray.
Press the $OPEN/CLOSE button. Once the
disc is loaded, the playback area switches.
Displaying the disc
information
Press DISPLAY.
The disc information appears on the TV screen.
To switch off the information display, press
DISPLAY again.
The information display differs between during
playback and when playback is stopped.
Playback60
En
Playback
4
Enjoying BONUSVIEW or
BD-LIVE
This player is compatible with BD-Video
%21869,(:DQG%'/,9(
:KHQXVLQJ%'9LGHRGLVFVFRPSDWLEOHZLWK
%21869,(:\RXFDQHQMR\VXFKIXQFWLRQV
as secondary video (picture in picture) (page
DQGVHFRQGDU\DXGLRSDJH:LWK%'
Video discs supporting BD-LIVE, special video
images and other data can be downloaded
from the Internet.
Data recorded on BD video and downloaded
from BD-LIVE is stored on the USB flash drive
(external memory). To enjoy these functions,
connect a USB flash drive (minimum 1 GB
capacity, 2 GB or greater recommended)
supporting USB 2.0 High Speed (480 Mbit/s) to
the USB port.
 :KHQ\RXLQVHUWRUUHPRYHD86%IODVK
drive, be sure to turn the player's power off.
 To recall data stored in the USB flash drive,
first insert the disc media that was being
used at the time the data was downloaded (if
a different disc is loaded, the data stored on
the USB flash drive cannot be played).
 If a USB flash drive containing other data
(previously recorded) is used, the video and
audio may not play back properly.
 Do not disconnect the USB flash drive while
playback is in progress.
 Some time may be required for the data to
load (read/write).
Caution
 ,WPD\QRWEHSRVVLEOHWRXVHWKH%21869,(:DQG
BD-LIVE functions if there is insufficient space on
the USB flash drive. In this case, refer to Erasing
data that has been added to BDs and application
data on page 81 for erasing the Virtual Package
data and the BD-LIVE data in the USB flash drive.
Note
 Operation of USB flash drives is not guaranteed.
 Playback of BD-LIVE function data differs
depending on the disc used. For details, consult
the user instructions supplied with the disc.
 To enjoy the BD-LIVE function, a network
connection and settings are required (pages 47
and 80).
 BD-LIVE is a function that provides for connection
to the Internet. Discs supporting the BD-LIVE
function may send ID codes identifying this player
and the disc to the contents provider via the
Internet.
Playback 61
En
Playback
4
Playback functions
The functions that can be used differ according to the type of disc and file. In some cases, some of
the functions cannot be used. Check the usable functions on the table below.
Function1
Disc/file type
BD-
ROM
BD-R
/-RE
DVD-
Video
DVD-R
/-RW
(VR
format)
AVCREC
AVCHD
Video
file
Image
file
Audio
file
Audio
CD
Forward and
reverse scanning23333333
44
Playing specific
titles, chapters or
tracks
  
Skipping content 
6
Slow motion play2,5 
7
Step forward and
step reverse2 
A-B Repeat play2
Repeat Play 
Zoom  
Angle8
Subtitle9  
Audio10   
Disc information 
1. Some functions may not work for some discs or files, even if indicated [] on the table.
2. For some discs, normal playback resumes automatically when the chapter switches.
3. No sound is produced during forward and reverse scanning.
4. Sound is produced during forward and reverse scanning.
 1RVRXQGLVRXWSXWGXULQJVORZPRWLRQSOD\EDFN
 ,WLVQRWSRVVLEOHWRVZLWFKWKHVSHHGGXULQJUHYHUVHVORZPRWLRQSOD\EDFN
6. Reverse slow motion playback is not possible.
7. Reverse step playback is not possible.
8. Angle mark is displayed for scenes at which multiple angles are recorded if Angle Mark is set to On (page 78).
 7KHW\SHVRIUHFRUGHGVXEWLWOHVGHSHQGRQWKHGLVFDQGILOH
 ,QVRPHFDVHVWKHVXEWLWOHPD\VZLWFKRUWKHVZLWFKLQJVFUHHQSURYLGHGRQWKHGLVFPD\EHGLVSOD\HG
immediately, without the current subtitle or the total number of subtitles recorded on the disc being displayed.
10. The types of recorded audio streams depend on the disc and file.
Playback62
En
Playback
4
Using the TOOLS menu
Various functions can be called out according
to the player's operating status.
1. Display the TOOLS menu.
Press TOOLS during playback.
2. Select and set the item.
Use / to select, then press ENTER.
Note
yItems that cannot be changed are displayed in
gray. The items that can be selected depend on
the player's status.
To change the setting of the selected
item
Use / to change.
To close the TOOLS menu
Press TOOLS.
TOOLS menu item list
Item Description
Title Display the title information for
the currently playing disc and total
number of titles on the disc. Also
select the title you want to play. (See
the following description.)
Chapter
(track/file)1Display the information for the
currently playing chapter (track/
file) and total number of chapters
in the disc. Also select the chapter
(track/file) you want to play. (See the
following description.)
Time Display the elapsed or remaining
time.
Also enter the time from which you
want to start playback. (See the
following description.)
Mode Switch the play mode (page 63).
Audio Switch the audio.
Angle Switch the BD-ROM/DVD-Video
disc's camera angle.
Subtitle Switch the subtitle language.
Code Page Switch the subtitle code page.
Second Video2Switch the BD-ROM's secondary
video (Picture-in-Picture).
Second Audio3Switch the BD-ROM's secondary
audio.
Bitrate Display the bitrate of the audio/video/
secondary video/secondary audio.
Still off Switch off the BD-ROM's still picture.
Item Description
Ins Search Skip forward 30 seconds.
Ins Replay Skip backward 10 seconds.
Slide Show Switch the playback speed while
playing the picture slide show.
Transition Change the style of the slide show
while playing the picture slide show.
1. One of these types of information is displayed,
depending on the type of disc.
2. Secondary video mark is displayed for scenes at
which secondary video is recorded if PIP Mark is
set to On (page 78).
3. Secondary audio mark is displayed for scenes at
which secondary audio is recorded if Secondary
Audio Mark is set to On (page 78).
Note
ySelectable items depend on the type of disc.
yThe types of recorded secondary audio streams
depend on the disc and file.
ySome discs do not include secondary audio/
secondary video.
yIn some cases, the secondary audio/secondary
video may switch or the switching screen
provided on the disc may be displayed
immediately, without the current secondary
audio/secondary video or the total number
of secondary audio/secondary video streams
recorded on the disc being displayed.
Playing from a specic time
(Time Search)
1. Select Time.
Use / to select, then press ENTER.
2. Input the time.
Use the number buttons (0 to 9) to input the
time.
yTo play from 45 minutes, input 0,0,4,5,0
and 0, then press ENTER.
yTo play from 1 hour 20 minutes, input 0,
1,2,0,0 and 0, then press ENTER.
yPress CLEAR to clear the values you have
input.
3. Starting playback from the specified
time.
Press ENTER.
Playback 63
En
Playback
4
Playing a specic title, chapter,
track or le (Search)
1. Select Title or Chapter (track/file).
Use / to select, then press ENTER.
2. Input the Title or Chapter (track/file)
number.
Use the number buttons (0 to 9) or / to
input the number.
yTo search for title 32, input 3 and 2, then
press ENTER.
yPress CLEAR to clear the values you have
input.
3. Starting playback from the specified
title, chapter or track.
Press ENTER.
Playing specied range of
discs, titles or chapter (track/
le) in random order
You can select from 2 types of random
playback.
1. Select Play Mode.
Use / to select, then press ENTER.
2. Select the playing mode.
Use / to select, then press ENTER.
Random play
The specified range of discs, titles or chapter
(track/file) is played in random order. The same
item may be played consecutively.
Shuffle play
The specified range of discs, titles or chapter
(track/file) is played in random order. Each item
is played once.
Continuing playback from a
specied position (Continued
Viewing Playback)
This function allows you to continue playback
from a position you specify to be played next
time, even after turning the power off.
Setting
 During playback, press CONTINUED
at the position from which you want to
start continued viewing playback.
The elapsed playing time at the specified
position is displayed on the TV screen.
Playing
1. Press PLAY to play the title for
which you have set continued viewing
playback.
The continued viewing playback
confirmation screen appears.
2. Use / to select Yes, then press
ENTER.
Playback starts from the specified position.
Note
yThe continued viewing playback setting is
canceled when $OPEN/CLOSE is pressed.
yContinued viewing playback may not work
properly with some discs.
Playback from Home Media Gallery64
En
Playback from Home Media Gallery
5
Chapter 5
Playback from Home
Media Gallery
About Home Media
Gallery
This player's Home Media Gallery function
allows you to display a list of input sources and
start playback. This chapter describes setup and
playback procedures required to enjoy these
IHDWXUHV:KHQ\RXSOD\WKHILOHVVWRUHGRQ\RXU
computer or the components on the network, it
is advisory that you also refer to the operation
manual supplied with your network component.
The input sources that can be played from
Home Media Gallery are as shown below.
 BD-R/RE (BDAV format) discs
 '9'55:95IRUPDWGLVFV
 Audio CDs (CD-DA, SACD and DTS CDs)
 DVD/CDs on which only data files of video,
image or audio files, etc. are recorded.
 USB device
 Files on the network servers (on the PCs or
components connected to the player via LAN
interface.)
Note
 The Home Media Gallery allows you to play files on
media servers connected to the same Local Area
Network (LAN) as the unit.
 The following files are allowed to be played from
Home Media Gallery:
–3&VUXQQLQJ0LFURVRIW:LQGRZV9LVWDRU;3
ZLWK:LQGRZV0HGLD3OD\HULQVWDOOHG
–3&VUXQQLQJ0LFURVRIW:LQGRZVZLWK
:LQGRZV0HGLD3OD\HULQVWDOOHG
– DLNA-compatible digital media servers (on PCs
or other components)
Files stored in a PC or DMS (Digital Media Server)
as described above can be played by Digital Media
Player (DMP). The player supports the use of such
DMP.
 To play back audio files stored on components
on the network, you must turn on the DHCP
server function of your router. In case your router
does not have the built-in DHCP server function,
it is necessary to set up the network manually.
Otherwise, you cannot play back files stored on
components on the network. See page 80.
About network playback
The network playback function of this unit uses
the following technologies:
Windows Media Player
6HH:LQGRZV0HGLD3OD\HU:LQGRZV0HGLD
Player 12 above for more on this.
Windows Media DRM
0LFURVRIW:LQGRZV0HGLD'LJLWDO5LJKWV
0DQDJHPHQW:0'50LVDSODWIRUPWR
protect and securely deliver content for
playback on computers, portable devices and
network devices. Home Media Gallery functions
DVD:0'50IRUQHWZRUNHGGHYLFHV
:0'50SURWHFWHGFRQWHQWFDQRQO\EHSOD\HG
RQPHGLDVHUYHUVVXSSRUWLQJ:0'50
&RQWHQWRZQHUVXVH:0'50WHFKQRORJ\WR
protect their intellectual property, including
FRS\ULJKWV7KLVGHYLFHXVHV:0'50VRIWZDUH
WRDFFHVV:0'50SURWHFWHGFRQWHQW,IWKH
:0'50VRIWZDUHIDLOVWRSURWHFWWKHFRQWHQW
content owners may ask Microsoft to revoke
WKHVRIWZDUHVDELOLW\WRXVH:0'50WRSOD\
or copy protected content. Revocation does
QRWDIIHFWXQSURWHFWHGFRQWHQW:KHQ\RX
download licenses for protected content, you
agree that Microsoft may include a revocation
list with the licenses. Content owners may
UHTXLUH\RXWRXSJUDGH:0'50WRDFFHVV
their content. If you decline an upgrade, you
will not be able to access content that requires
the upgrade. This product is protected by
certain intellectual property rights of Microsoft.
Playback from Home Media Gallery 65
En
Playback from Home Media Gallery
5
Use or distribution of such technology outside
of this product is prohibited without a license
from Microsoft.
DLNA
DLNA CERTIFIED® Audio Player
The Digital Living Network Alliance (DLNA)
is a cross-industry organization of consumer
electronics, computing industry and mobile
device companies. Digital Living provides
consumers with easy sharing of digital media
through a wired or wireless network in the
home.
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies
with DLNA Interoperability Guidelines v1.5.
:KHQD3&UXQQLQJ'/1$VHUYHUVRIWZDUHRUD
DLNA compatible device is connected to this
player, some setting changes of software or
other devices may be required. Please refer to
the operating instructions for the software or
device for more information.
DLNA®, the DLNA Logo and DLNA CERTIFIED®
are trademarks, service marks, or certification
marks of the Digital Living Network Alliance.
Content playable over a network
 Even when encoded in a compatible format,
some files may not play correctly.
 Some functions may not be supported
depending on the server type or version
used.
 Supported file formats vary by server. As
such, files not supported by your server
are not displayed on this unit. For more
information check with the manufacturer of
your server.
Disclaimer for Third Party Content
Access to content provided by third parties
requires a high speed Internet connection and
may also require account registration and a
paid subscription.
Third party content services may be changed,
suspended, interrupted, or discontinued at any
time without notice, and Pioneer disclaims any
liability in connection with such occurrences.
Pioneer does not represent or warrant that
content services will continue to be provided
or available for a particular period of time,
and any such warranty, express or implied, is
disclaimed.
About playback behavior over a
network
 Playback may stall when the PC is switched
off or any media files stored on it are deleted
while playing content.
 If there are problems within the network
environment (heavy network traffic, etc.)
content may not be displayed or played
properly (playback may be interrupted or
stalled). For best performance, a 10BASE-T/
100BASE-TX connection between the player
and the PC is recommended.
 If several clients are playing simultaneously,
as the case may be, playback is interrupted
or stalled.
 Depending on the security software installed
on a connected PC and the setting of such
software, network connection may be
blocked.
Pioneer is not responsible for any malfunction
of the player and/or the Home Media
Gallery features due to communication
errors/malfunctions associated with your
network connection and/or your PC, or other
connected equipment. Please contact your PC
manufacturer or Internet service provider.
Windows Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
Microsoft®, Windows®7, Windows®Vista,
Windows®XP, Windows®2000,
Windows®Millennium Edition, Windows®98, and
WindowsNT® are either registered trademarks
or trademarks of Microsoft Corporation in the
United States and/or other countries.
Playback from Home Media Gallery66
En
Playback from Home Media Gallery
5
DLNA Search
Playing back the files stored on the
components connected to the player via
network.
1. Press HOME MEDIA GALLERY to
display the Home Media Gallery.
The Home Media Gallery can also be
displayed by selecting Home Media Gallery
from Home Menu, then pressing ENTER.
2. Select DLNA Search.
Use / to select, then press ENTER.
3. Select the server which contains the file
you want to play.
4. Select the file you want to play.
Use / to select, then press ENTER.
Note
yThis player does not support DTCP-IP.
yRecorded files and contents that are protected
by digital copyright protection cannot be played
via LAN interface.
Disc/USB playback
1. Press HOME MEDIA GALLERY to
display the Home Media Gallery.
The Home Media Gallery can also be
displayed by selecting Home Media Gallery
from Home Menu, then pressing ENTER.
2. Select Disc or USB.
Use / to select, then press ENTER.
3. Select Photo/Music/Video/AVCHD.
Use / to select, then press ENTER.
yThis step is not for the discs that have
been recorded with BDAV/VR/AVCREC
format.
yTo play files in AVCHD format on a USB
device, create a folder named "AVCHD"
on the USB device, then copy the "BDMV"
folder containing which the files to be
played into the "AVCHD" folder.
4. Select the title/track or file you want to
play.
Use / to select, then press ENTER.
Playback starts from the selected title/track
or file.
yIf the file you want to play is in the folder,
select the folder that contains the file
first.
Playing back image les
About Slideshow
A display of the files on the disc or in the folder
switches automatically.
Note
 :KHQSOD\LQJDQDXGLR&'&''$6$&''76
CD), the Now Playing screen is displayed.
 Some BD-R/-RE discs have playback protection. To
cancel the protection, input the password set for
the disc.
 It may take a few seconds before playback starts.
This is normal.
 It may not be possible to play some files properly.
 The number of views may be restricted.
 Depending on the connected devices and
conditions, some time may be required for
playback to start and for the image to switch.
Playback from Home Media Gallery 67
En
Playback from Home Media Gallery
5
Playing in the desired
order (Playlist)
The discs that can add tracks and files to the
Playlist are as shown below.
 DVDs/CDs/USB devices on which audio files
are recorded
Adding tracks/les
Use this procedure to add tracks and files, and
create the Playlist.
1. Press HOME MEDIA GALLERY to
display the Home Media Gallery.
The Home Media Gallery can also be
displayed by selecting Home Media Gallery
from Home Menu, then pressing ENTER.
2. Select Disc or USB.
Load the disc beforehand.
Use / to select, then press ENTER.
3. Select the track/file to be added.
Use to select.
4. Press POP UP MENU to display the
POP UP MENU menu.
5. Select Add to Playlist to add to Playlist.
Use / to select, then press ENTER.
The track or file selected in step 3 is added
to the Playlist.
yTo add more tracks or files, repeat steps 3
to 5.
Playing the playlist
1. Press HOME MEDIA GALLERY to
display the Home Media Gallery.
The Home Media Gallery can also be
displayed by selecting Home Media Gallery
from Home Menu, then pressing ENTER.
2. Select Playlist.
Use / to select, then press ENTER.
3. Select the track/file to be played.
Use / to select, then press ENTER.
Playback starts from the selected track/
file and continues until the end of the list is
reached. Use +/, to play the previous
or next track/file. The Now Playing screen is
displayed.
Deleting tracks/les from the
playlist
1. Select the track/file to be deleted, then
press POP UP MENU to display the
POP UP MENU menu.
2. Use / to select Remove from Playlist,
then press ENTER.
Playing the web contents68
En
Playing the web contents
6
Chapter 6
Playing the web contents
You can enjoy some streaming contents on the
Internet with the player.
Available web contents
 YouTube (MPEG4 AVC H.264)
 Picasa
Note
About YouTube
 YouTube videos of the following sizes can be played.
– Standard quality (400 x 226 pixels, 200 kbps)
– Medium quality (480 x 360 pixels, 512 kbps)
– High quality (854 x 480 pixels, 900 kbps)
– HD (720p) (1280 x 720 pixels, 2 Mbps)
– HD (1080p) (1920 x 1080 pixels, 4 Mbps)
 This player supports the YouTube Leanback service.
The Youtube Leanback service is only available in
English for now.
Refer to YouTube Help at http://www.google.com/
support/youtube/ for further information.
 YouTube videos for mobile phones cannot be played.
 Some YouTube videos cannot be played.
About Picasa
 Picasa is available only in English. Refer to
instructions at http://picasa.google.com/support/
for details.
– Register your user name and password on the
3&EHIRUH\RXXVH3LFDVD:HE$OEXPV
–:KHQ\RXDFFHVV3LFDVDIURPWKLVSOD\HUIRUWKH
first time, select the New User icon and enter
your registered user name and password.
 Depending on the Internet connection environment,
it may not be possible to play web contents properly.
 To access to web contents, this player requires a
broadband Internet connection. A contract with
an Internet provider is required for a broadband
Internet connection.
 Access to content provided by third parties requires
a high speed Internet connection and may also
require account registration and a paid subscription.
Third party content services may be changed,
suspended, interrupted, or discontinued at any time
without notice, and Pioneer disclaims any liability in
connection with such occurrences.
Pioneer does not represent or warrant that content
services will continue to be provided or available for
a particular period of time, and any such warranty,
express or implied, is disclaimed.
 Disc playback and this function cannot be used at
the same time.
Playing the items
Caution
You must connect the player to the Internet
beforehand. See Connecting to the network through
LAN interface on page 47 for the details.
1. Display the selection screen.
The selection screen can be selected by
pressing HOME MENU then selecting
:HE&RQWHQWVA Desired web content.
2. Select the type of web contents.
Use / to select, then press ENTER.
3. Press / to select the item you want
to play, then press ENTER.
To stop playback, press EXIT. Playback of
the video stops and the Home Menu screen
reappears.
Other Operating 69
En
Other Operating
7
Chapter 7
Other Operating
Recording Audio CD to a
USB device
You can record audio CD to a USB device using
this player.
1. Insert an USB device into the USB port
on the front panel.
Note
yPlease connect only one USB device.
2. Open the disc tray and place an Audio
CD on the tray.
Press $OPEN/CLOSE.
3. Close disc tray.
:KHQ$OPEN/CLOSE is pressed, playback
will start automatically.
yIf playback does not start automatically,
press the PLAY on the remote or /!
(PLAY/PAUSE) on the device to start
playback.
4. Press USB REC during CD playback.
[CD RIP] will be displayed.
5. Select the song or the Track No. you
want to record.
If you are recording all the songs on the CD
use / / / to select [Select all] and press
ENTER.
If you are selecting a Track to record use
/ / / to select the Track No. and press
ENTER.
yIf there are more than one Track you want
to record, repeat the step for 5.
yIf you want to delete a selected Track use
/ / / to select [Select None] and
press ENTER.
6. Set the recording speed
Use / / / to select [Speed] and press
ENTER.
yThe recording speed will change each
time ENTER is pressed. The recording
speed will change as shown below.
Normal: when recording while listening
to the music.
Fast: will record at approx 4x speed. You
cannot listen to the music.
7. Start recording.
Use / / / to select [Start] and press
ENTER to start recording.
8. Exit CD recording display.
Use / / / to select [Cancel] then press
ENTER after recording has finished.
Note
 Use cursor / / / to select [Bitrate] then press
ENTER to change the Bitrate setting.
The set speed will change each time [Bitrate] is
pressed. The set value can be selected from those
shown below.
[64kps] A[96kbps] A [128kps] A[192kps] A
[256kps] A[320kps]
Other Operating70
En
Other Operating
7
iPod/iPhone playback
Merely by connecting your iPod/iPhone to
this unit, you can enjoy high-quality sound
from your iPod/iPhone. This unit can also be
connected to a television set, letting you view
images from your iPod/iPhone.
Playback and volume level setting for iPod/
iPhone music and images can be performed
from this unit or the iPod/iPhone itself.
 The iPod nano 6G cannot play back video,
but can play slide shows only.
 This system has been developed and tested
for the software version of iPod/iPhone
indicated on the website of Pioneer (http://
pioneer.jp/homeav/support/ios/eu/).
 Installing software versions other than
indicated on the website of Pioneer to your
iPod/iPhone may result in incompatibility
with this system.
 :KHQXVLQJDQL3RGL3KRQHQRWVXSSRUWHG
by this unit, use a commercially available
cable to connect the iPod/iPhone to the
PORTABLE IN connector of this unit.
 Before connecting the iPod, turn this unit
off and reduce the volume of this unit to its
minimum.
1. Connect the cradle so that the mark is
downwards. Put your iPod/iPhone on it.
Connect the iPod/iPhone firmly.
If you turn this unit on, your iPod/iPhone
is automatically turned on and recharging
starts.
Note
 Pioneer does not guarantee that this unit plays
iPod/iPhone models other than the ones specified.
 Some functions may be restricted depending on
the model or software version.
 iPod/iPhone is licensed for reproduction of non-
copyrighted materials or materials the user is
legally permitted to reproduce.
 Features such as the equalizer cannot be controlled
using this system, and we recommend switching
the equalizer off before connecting.
 Pioneer cannot under any circumstances accept
responsibility for any direct or indirect loss arising
from any inconvenience or loss of recorded
material resulting from iPod/iPhone failure.
 For detailed instructions on using the iPod/iPhone,
please refer to the manual supplied with the iPod/
iPhone.
Connecting your TV
To watch iPod/iPhone images on a television,
connect it using a composite video cable.
:KHQDQL3RGL3KRQHLVFRQQHFWHGWRWKLVXQLW
the TV output setting of the iPod/iPhone is
automatically set to ‘ON’.
Note
 Some iPod allow the TV output setting to be
changed while connected.
 :KHQWKHL3RGL3KRQHLVGLVFRQQHFWHGIURPWKLV
unit, the iPod/iPhone’s TV output setting returns to
its original state.
Other Operating 71
En
Other Operating
7
Playing your iPod/iPhone
Caution
 :KHQ\RXUL3RGL3KRQHLVFRQQHFWHGWRWKLVXQLW
and you wish to operate the iPod/iPhone directly,
be sure to hold the iPod/iPhone steady with the
other hand to prevent malfunctions due to faulty
contacts.
1. Connect your iPod/iPhone.
To connect your iPod/iPhone, see
Connecting your iPod/iPhone on page 70.
2. Press FUNCTION to select iPod as the
input source and press ENTER.
Button What it does
PLAY Starts normal playback.
! PAUSE Pauses playback.
# STOP Pauses playback.
+ PREV Press to skip to the start of the
current file, then previous files.
, NEXT Press to skip to the next file.
)Press to start fast reverse scanning.
*Press to start fast forward scanning.
MENU Use to access the iPod/iPhone menu.
/ /ENTER Use to control the iPod/iPhone
menu.
Important
 If this unit cannot play your iPod/iPhone,
perform the following troubleshooting
checks:
– Check whether the iPod/iPhone is
supported by this unit.
– Reconnect the iPod/iPhone to the unit. If
this doesn’t seem to work, try resetting
your iPod/iPhone.
– Check the iPod/iPhone software is
supported by this unit.
 If the iPod/iPhone cannot be operated, check
the following items:
– Is the iPod/iPhone connected correctly?
Reconnect the iPod/iPhone to the unit.
– Is the iPod/iPhone experiencing a
hangup? Try resetting the iPod/iPhone,
and reconnect it to the unit.
Note
 :KHQLQSXWLVVZLWFKHGIURPL3RGWRDQRWKHU
function, iPod/iPhone playback is temporarily
stopped.
Other Operating72
En
Other Operating
7
Radio Operations
Be sure that FM aerial is connected. (Refer to
the page 44)
Listening to the radio
1. Press FUNCTION until FM appears in the
display window and press ENTER.
The last received station is tuned in.
2. Scanning will start when either the * or
the ) button is pressed.
or
Press / repeatedly.
or
Press +,, on the front panel of the
player repeatedly.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL + or
VOL – on the remote control repeatedly.
Presetting the radio stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until FM appears in the
display window and press ENTER.
The last received station is tuned in.
2. Select the desired frequency by using / .
3. Press PROGRAM a preset number will flash
in the display window.
4. Press / to select the preset number you
want.
5. Press PROGRAM.
The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
7. You can select the stored station by
pressing / .
Deleting all the saved stations
1. Press and hold STOP for two seconds.
[ERASE ALL] will flash up on the display
window.
2. Press STOP to erase all of the saved radio
stations.
Improving poor FM reception
Press AUDIO on the remote control. This will
change the tuner from stereo to mono and
usually improve the reception.
Seeing information about a
radio station
The FM tuner is supplied with the RDS (Radio
Data System) facility. This shows information
about the radio station being listened to. Press
BOOKMARK (RDS) repeatedly to cycle through
the various data types:
PS (Programme Service Name)
The name of the channel will appear
in the display.
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or
News) will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast
station. This text may scroll across
the display.
You can search the radio stations by
programme type by pressing BOOKMARK
(RDS). The display will show the last PTY in use.
Press ZOOM (PTY) one or more times to select
your preferred programme type. Press and hold
/7KHWXQHUZLOOVHDUFKDXWRPDWLFDOO\:KHQ
a station is found the search will stop.
Other Operating 73
En
Other Operating
7
Bluetooth® ADAPTER for
Wireless Enjoyment of
Music
 Bluetooth wireless technology enabled
device: cell phone
 Bluetooth wireless technology enabled
device: Digital music player
 Device not equipped with Bluetooth wireless
technology: Digital music player + Bluetooth
audio transmitter (sold commercially)
Wireless music play
:KHQWKHBluetooth ADAPTER (Pioneer Model
No. AS-BT100 or AS-BT200) is connected to
this unit, a product equipped with Bluetooth
wireless technology (portable cell phone, digital
music player, etc.) can be used to listen to
music wirelessly. Also, by using a commercially
available transmitter supporting Bluetooth
wireless technology, you can listen to music on
a device not equipped with Bluetooth wireless
technology. The AS-BT100 and AS-BT200 model
supports SCMS-T contents protection, so music
can also be enjoyed on devices equipped with
SCMS-T type Bluetooth wireless technology.
 :LWKWKH$6%7VRPHIXQFWLRQVPD\QRW
be available on this unit.
 It must be necessary that the Bluetooth
wireless technology enabled device supports
A2DP profiles.
Note
 Pioneer does not guarantee proper connection and
operation of this unit with all Bluetooth wireless
technology enabled devices.
 About one minute is required between turning the
power on and completion of startup.
Listen to music on a Bluetooth
wireless technology enabled
device
Pairing of the unit and a Bluetooth
wireless technology enabled device.
(Initial registration)
Prior to starting pairing, make sure that the
Bluetooth function on your Bluetooth wireless
technology enabled device is turned on. Please
see the user manual of your Bluetooth wireless
technology enabled device for more details. The
pairing operation only needs to be performed
once, and then is not required again.
1. Press FUNCTION and change input to
BLUETOOTH and press ENTER.
After [BLUETOOTH] is displayed in the
unit's display window, [READY] will then be
displayed.
2. Operate the Bluetooth wireless
technology enabled device and perform
pairing.
:KHQDBluetooth wireless technology
enabled device searches for this unit, some
Bluetooth wireless technology enabled
devices will display a list of supported
devices on their display section. This unit
will be displayed as Bluetooth ADAPTER
[AS-BT100] or [AS-BT200].
3. Enter the PIN code.
Pin code: 0000
This unit cannot be set with any PIN code
other than 0000.
4. When the unit and a Bluetooth
wireless technology enabled device
are successfully paired, [SINK] will be
displayed in the unit's display window.
Note
yThe pairing method may differ depending
on the type of Bluetooth wireless technology
enabled device.
5. Playback music using the Bluetooth
wireless technology enabled device.
Please see the user manual of your
Bluetooth wireless technology enabled
device for details on how to playback music.
Other Operating74
En
Other Operating
7
Note
 This unit does not support AVRCP.
 This unit does not support Mono Headset Profile
(Hands Free Profile).
 ABluetooth wireless technology enabled device
cannot be operated by this unit.
 This unit cannot be used to listen to one seg
sounds on a Bluetooth wireless technology enabled
device. Music contents protected by SCMS-T
cannot be listened to.
 Only one Bluetooth wireless technology enabled
device may be paired with this unit; multiple
pairing is not possible.
 You may be unable to use the Bluetooth function,
depending on the type of Bluetooth wireless
technology enabled device.
 :KHQQRWFRQQHFWHGE\Bluetooth,[READY] will be
displayed in the unit's display window.
 Other electro-magnetic waves may cause
interference with the connection, causing the
sound to cut out.
 If medical equipment, microwaves, wireless
LAN routers etc. on the same frequency cause
malfunction to occur, the Bluetooth connection will
be lost.
 Even if the distance between the Bluetooth wireless
technology enabled device and the unit is less than
10 meters, if there are other obstacles in between
the two of them then you will be unable to connect
the Bluetooth wireless technology enabled device.
 If an obstacle comes between the Bluetooth
wireless technology enabled device and the unit to
interrupt communication, the Bluetooth connection
will be lost.
 If the Bluetooth wireless technology enabled device
and the unit move apart then sound quality will fall,
and if they move beyond the operating range the
Bluetooth connection will be lost.
 If the power to the unit is cut or the Bluetooth
wireless technology enabled device is moved
more than 10 meters from the unit, the Bluetooth
connection will be lost.
Karaoke
1. Press KARAOKE on the remote control.
Karaoke Setup under Initial Setup will be
displayed on the TV screen.
2. Turn the Karaoke Switch on.
Select [Karaoke Setup] A[Karaoke Switch]
A[On] using cursor and press ENTER.
3. Adjust microphone volume.
Select [Karaoke Setup] A[Microphone] A
[Mic Volume] using cursor and press ENTER.
Use / to adjust the microphone volume.
Press RETURN to finish.
4. Adjust microphone echo.
Select [Karaoke Setup] A[Microphone] A
[Mic Echo] using cursor and press ENTER.
Use cursor / to adjust the microphone
echo.
Press RETURN to finish.
5. Switch Vocal Cancel on or off.
Use cursor to select [Karaoke Setup] A
[Vocal Cancel] A[On] or [O] and press
ENTER.
Note
 Karaoke can only be used with disc playback or
USB playback.
 Depending on the song, Voice Cancel may not be
effective.
 :KHQLQVHUWLQJWKH0,&WHUPLQDOVXSSRUWWKH
top of the unit with your hand to prevent it from
moving.
Other Operating 75
En
Other Operating
7
Sound
Press SOUND on the remote control to display the sound select menu on the TV screen.
Use cursor button to make a selection, then press ENTER.
Setting Options Explanation
Sound Retriever Off $:0$RU03ILOHLVSOD\HGZLWKKLJKVRXQGTXDOLW\7KLVLVRQO\
valid for files with the extension “.wma” or “.mp3”.
The effect depends on the file. Try different settings, and choose the
one providing the best effect.
Low
High
Equalizer Add a variety of effects to the output sound. Select a mode that suits your personal tastes.
Original Enjoy a relaxing and natural sound.
News This mode is suited to the news.
Gaming This mode is suited to video games.
Movie This mode is suited to movies.
Music This mode is suited to music.
Surround Off
Virtual 3D Min Effect is minimum Virtual 3D Sound: Has the effect of
creating a 3D sound space.
Virtual 3D Mid Effect is moderate
Virtual 3D Max Effect is maximum
5 Speaker Mode1
(BCS-727/BCS-323)
The sound from the front speakers will also be output by the rear
speakers. This mode is valid in both 2 channel audio source and 5.1
channel audio source.
5 Speaker Mode2
(BCS-727/BCS-323)
The same sound will be output from the 5 speakers other than the
sub woofer. This mode is valid in both 2 channel audio source and
5.1 channel audio source.
Dolby PL II Movie
(BCS-727/BCS-323)
Dolby Pro Logic II enables you to play stereo source on 5.1-channel.
This mode is valid in 2 channel audio source.
Dolby PL II Music
(BCS-727/BCS-323)
6RXQG:LQJ0RGH
(BCS-HF828 Only)
Off HVT speakers make it possible to enjoy a broader-ranging sound.
On
Audio Sync Adjust the delay between image and sound. Use / to adjust.
Advanced settings76
En
Advanced settings
8
Chapter 8
Advanced settings
Changing the settings
Operating the initial setup
screen
1. When playback is stopped, display the
Home Menu screen.
Press HOME MENU.
2. Select and set Initial Setup.
Use / to select, then press ENTER.
3. Select the item and change the setting.
Use / / / to select, then press ENTER.
Closing the Initial Setup screen
Press HOME MENU or RETURN.
Note
 The items that can be selected depend on the player's status.
 In Options, the factory default settings are indicated in bold.
Setting Options Explanation
Display Setting
TV Screen 16:9 Full Select this when connecting to a wide (16:9) TV.
16:9 Normal Select this when connected to a wide (16:9) TV. 4:3 pictures are displayed
with vertical black bars along the sides.
4:3 Pan&Scan Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with the left and right sides of the image cut off to display
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
4:3 Letterbox Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with black bands at the top and bottom.
Video Adjust The quality of the playback picture can be adjusted according to the TV you are using (page 80).
Sharpness High Choose the level of sharpness.
Middle
Low
Video Mode Standard Choose the video output mode.
Vivid
Cinema
Custom
&7,&RORU7UDQVLHQW,PSURYHPHQW3URYLGHVLPDJHVZLWKFOHDUHUFRORUFRQWRXUV
Noise Reduction 0Choose the level of noise reduction.
1
2
3
Net Contents Mode O Select this to automatically correct compressed video files on the network, a
disc or a USB device and play them with a more natural picture quality.
On
Advanced settings 77
En
Advanced settings
8
Setting Options Explanation
Audio Output
DRC (Dynamic Range
Control)
O Select this to output audio signals without using the DRC function.
On Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Auto Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc. This only affects Dolby TrueHD signals.
7KLVDIIHFWVVXFKDXGLRVLJQDOVDV'ROE\'LJLWDO'ROE\7UXH+'DQG'ROE\'LJLWDO3OXV
'HSHQGLQJRQWKHGLVFWKHHIIHFWPD\EHZHDN
Speaker Setup Adjust the Trim (output level) and Delay (distance from viewers) of the speakers.
Please see "Adjust speaker settings" for more details (page 80).
Test Tone Output a test tone from the speakers.
HDMI
Color Space RGB Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422 Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform
black.
Resolution Auto Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
480I/576I Output the video signals from the HDMI OUT terminal with the selected
resolution.
The resolution can be changed by pressing RESOLUTION, but Auto cannot be
selected.
480P/576P
720P
1080I
1080P
HDMI Audio Out Bitstream Select this to output HDMI audio signals directly.
PCM Select this to output HDMI audio signals converted to 2-channel audio
signals.
Re encode :KHQD%'FRQWDLQLQJVHFRQGDU\DXGLRDQGLQWHUDFWLYHDXGLRLVSOD\HGWKH
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Off Select this when you do not want to output the audio signal from the HDMI
output terminal.
Control On Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 42.
Off Select this when you do not want to control the player with the remote
control of the connected AV device using an HDMI cable.
HDMI Deep Color 30bits Select this when outputting the video signals with 30-bit color.
36bits Select this when outputting the video signals with 36-bit color.
O Select this when outputting the video signals with normal 24-bit color.
HDMI 1080P 24Hz On Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Off Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
HDMI 3D Auto :LWK'GLVFVWKHGLVFLVSOD\HGZLWK'LPDJHV
Off 3D images are not played.
3D Notice Yes This sets whether or not to display the 3D notice when playing 3D images.
No
Advanced settings78
En
Advanced settings
8
Setting Options Explanation
Network
IP Setting Select this to set the IP address of the player and DNS server (page 80).
Proxy Server Only set the proxy server if so instructed by your Internet service provider (page 81).
Information Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Connection Test Select this to test the network connection (page 81).
Internet Connection Enable Select this when connecting to the Internet.
Disable Select this when not connecting to the Internet.
BD-Live Connection Permitted All discs are allowed to connect to BD-LIVE.
Partial Permitted Only discs whose safety has been confirmed are allowed to connect to BD-
LIVE.
Prohibited No disc is allowed to connect to BD-LIVE.
DLNA Enable Select this when connecting to DLNA server.
Disable Select this when not connecting to DLNA server.
Interface Ethernet Select when using a LAN cable to connect to the network.
:LUHOHVV Select when connecting wirelessly to the network.
:LUHOHVV6HWWLQJ Perform settings for a wireless network connection. (page 48).
Language
OSD available languages Choose a language for the on-screen displays from the listed languages.
Audio
* For some discs, it may
not be possible to change
to the selected language.
available languages Choose a language from the listed languages to set the default audio
language for BD-ROM and DVD-Video playback.
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.
Subtitle
* For some discs, it may
not be possible to change
to the selected language.
available languages Choose a language from the listed languages to set the default subtitle
language for BD-ROM and DVD-Video playback.
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.
Menu
* For some discs, it may
not be possible to change
to the selected language.
available languages Choose a language from the listed languages to set the default language for
BD-ROM and DVD-Video menus.
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.
Playback
Angle Mark On Select this to display the angle mark on the TV screen (page 58).
Off Select this if you do not want to display the angle mark on the TV screen.
PIP Mark On Select this to display the PIP mark on the TV screen.
Off Select this if you do not want to display the PIP mark on the TV screen.
Secondary Audio Mark On Select this to display the secondary audio mark on the TV screen (page 62).
Off Select this if you do not want to display the secondary audio mark on the TV
screen.
DivX(R) VOD DRM Registration Code Displays the player's registration code required to play DivX VOD files (page 15).
Internet Setting Permitted :HEFRQWHQWVFDQEHZDWFKHGZLWKRXWHQWHULQJWKHSDVVZRUG
Partial Permitted The password must be entered to watch web contents.
Prohibited No web contents can be watched.
Disc Auto Playback On Discs are played automatically after they are loaded.
Off Loaded discs do not start playing automatically.
Last Memory On Select this to save the point at which you last stopped playback, even after
the disc tray is opened or you switch to the standby mode.
Off Select this when you want to use only Continue Viewing Play (page 63).
PBC (Play Back Control) On Select this to play Video-CDs (version 2.0) compatible with PBC using the
disc menu.
Off Select this to play Video-CDs (version 2.0) compatible with PBC without using
the disc menu.
Setup Navigator Start making the settings using the Setup Navigator menu. For details, see page 52.
Advanced settings 79
En
Advanced settings
8
Setting Options Explanation
Security
Change Password Register (change) the password for parental lock settings or for unlocking to play DVD-Videos with
the parental lock feature (page 82).
Parental Control Change the player's parental lock level (page 82).
Country Code Change the Country/Area code (page 82).
Options
Screen Saver Off The screen saver is not activated.
1 min The screen saver will be activated if no operation has been performed for
more than one minute/two minutes/three minutes. Operating the remote
control can deactivate the screen saver.
2 min
3 min
Auto Power Off Off Select this if you do not want the power to turn off automatically.
10 min The power will be automatically turned off if no operation has been performed
for more than 10 minutes/20 minutes/30 minutes.
20 min
30 min
Quick Start On Select to shorten the required time to boot up.
O Select to perform normal bootup.
Update Disc Select the method of software updating. (page 83)
USB Storage
Network
Load Default Restore the settings to the factory default.
System Information Check the system version number.
Disc Auto Update On Display the software update screen when the disc with the player's update
file is loaded.
Off The software update screen must be displayed manually. (page 83)
BUDA BUDA Information Display and set up the BUDA data on the connected USB device.
BUDA Setup
Karaoke Setup
Karaoke Switch O Select when not using Karaoke.
On Select when using Karaoke.
Micphone Setup Mic Volume 1 Select to adjust the volume of your microphone.
Use / to perform the adjustment on the mic volume adjustment screen.
Mic Echo Select to adjust the level of microphone echo.
Use / to perform the adjustment on the mic echo adjustment screen.
Vocal Cancel O Select when you want Vocal Cancel off.
On Select when you want Vocal Cancel on.
Advanced settings80
En
Advanced settings
8
Adjusting the video
1. Select and set Display Setting A Video
Adjust A Next Screen.
Use / to select, then press ENTER.
2. Select the item and change the setting.
Use / to select the item, then use /
to change the setting. Once the setting is
completed, press RETURN to close the
settings screen.
Item Description
Brightness Select this to adjust the TV screen's
brightness.
Contrast Select this to adjust the TV screen's
contrast.
Hue Select this to adjust the color (green
and red) balance of the TV screen.
Saturation Select this to adjust the TV screen's
saturation.
Adjust speaker settings
1. Select and confirm Audio Output A
Speaker Setup A Next Screen
2. A picture of speakers will be shown on
the screen. Select the speaker using
cursor and press ENTER.
3. Use /to select Trim or Delay and
then press ENTER.
4. Use cursor /to adjust the setting,
then press ENTER.
Adjust speaker settings while listening
to a sound
1. Select and confirm Audio Output A
Test Tone A Next Screen.
2. A test tone will be output. The speakers
will switch automatically.
3. A picture of speakers will be shown
on the screen. Press ENTER when
the speaker you wish to adjust to is
focused.
4. Use /to select Trim or Delay and
then press ENTER.
5 Use /to adjust the setting, then press
ENTER.
Setting the IP address
1. Select and set Network A IP Setting A
Next Screen.
Use / to select, then press ENTER.
2. Set IP address.
Use / / / to set the IP address of the
player or DNS server, then press ENTER.
yAuto Set IP Address
On – The player's IP address is obtained
automatically. Select this when using
a broadband router or broadband
modem that has a DHCP (Dynamic Host
Configuration Protocol) server function.
This player's IP address will automatically
be allocated from the DHCP server.
O – The player's IP address must be set
manually. Use the number buttons (0 to
9) to input the IP address, subnet mask
and default gateway.
Note
yFor information on the DHCP server function,
refer to the operating instructions for the
network device.
yYou may need to contact your Internet service
provider or network administrator when
inputting the IP address manually.
Advanced settings 81
En
Advanced settings
8
Setting the proxy server
Only set the proxy server if so instructed by
your Internet service provider.
1. Select and set Network A Proxy Server
A Next Screen.
Use / to select, then press ENTER.
2. Select and set Use or Not use at Proxy
Server.
Use / to change, then press .
yUse – Select this when using a proxy
server.
yNot use – Select this when not using a
proxy server.
If you have selected Use, proceed to step 3.
3. Select and set Server Select Method.
Use / to change, then press .
yIP Address – Input the IP address.
yServer Name – Input the server name.
4. Input IP Address or Server Name.
Use the number buttons (0 to 9) to input the
number if you select IP address in step 3.
Use / to move the cursor.
:KHQ6HUYHU1DPHLVVHOHFWHGLQVWHS
use the number buttons (0 to 9) to launch
the software keyboard. Now use / / /
to select characters and items, then press
ENTER to input.
5. Input Port Number.
Press , then use the number buttons (0 to
9) to input the number.
6. Press ENTER to set.
Displaying the network settings
Select and set Network A Information
A Next Screen.
Use / to select, then press ENTER.
The MAC address, IP address, subnet mask,
default gateway and DNS server (primary
and secondary) settings are displayed.
:KHQAuto Set IP Address is set to On, the
values obtained automatically are displayed.
Note
y[0.0.0.0] is displayed when each IP address has
not been set.
Testing the network connection
Select and set Network A Connection
Test A Start.
Use / to select, then press ENTER.
[Network is OK.] is displayed once the
test is completed. If any other message is
displayed, check the connections and/or
settings (pages 47 and 80).
Changing to other language at
language setting
1. Select and set Language.
Use / to select, then press ENTER.
2. Select and set OSD, Audio, Subtitle or
Menu
Use / to select, then press ENTER.
3. Select and set the desired language.
Use / to select, then press ENTER.
Note
yIf a language not recorded on the BD/DVD
is set, one of the recorded languages is
automatically selected and played.
Erasing data that has been added to
BDs and application data
Use this procedure to erase data that has
been added to BDs (data downloaded with
the BD-LIVE function and data used with
WKH%21869,(:IXQFWLRQDQGDSSOLFDWLRQ
data.
Caution
ySome time is required to erase the data.
yDo not unplug the power cord while data is
being erased.
1. Select and set BUDA A BUDA Setup.
Use / to select, then press ENTER.
2. Select and set Fmt buda.
Press ENTER.
Advanced settings82
En
Advanced settings
8
Registering or Changing the password
Use this procedure to register or change
the code number required for the Parental
Lock settings.
About default password of this unit
The default password is [0000].
yThis unit might ask you to enter a
password when you change the
password.
yIf you reset this unit, your password is
simultaneously changed to the default
setting.
1. Select and set Security A Change
Password A Next Screen.
Use / to select, then press ENTER.
2. Input the password.
Use the number buttons (0 to 9) to input the
number, then press ENTER to set.
Use / to move the cursor.
3. Re-input the password.
Use the number buttons (0 to 9) to input the
number, then press ENTER to set.
Use / to move the cursor.
yTo change the password, input the
previously registered password, then
input the new password.
Note
y:HUHFRPPHQGPDNLQJDQRWHRIWKHSDVVZRUG
yIf you have forgotten the password, reset
the player to the factory default setting, then
register the password again (page 84).
Changing the Parental Lock level for
viewing DVDs/BD-ROMs
Some DVD-Video discs containing scenes
of violence, for example, have Parental Lock
levels (check the indications on the disc's
jacket or elsewhere). To restrict viewing
these discs, set the player's level to the level
lower than the discs.
1. Select and set Security A Parental
Control A Next Screen.
Use / to select, then press ENTER.
2. Input the password.
Use the number buttons (0 to 9) to input the
number, then press ENTER to set.
Use / to move the cursor.
3. Change the level.
Use / to change, then press ENTER to
set.
Note
yThe level can be set to Off or between Level1
DQG/HYHO:KHQVHWWR2IIYLHZLQJLVQRW
restricted.
Changing the Country/Area code
1. Select and set Security A Country
Code A Next Screen.
Use / tto select, then press ENTER.
2. Input the password.
Use the number buttons (0 to 9) to input the
number, then press ENTER to set.
Use / to move the cursor.
3. Change the country/area code.
Use / to change, then press ENTER to
set. Refer to page 85.
Advanced settings 83
En
Advanced settings
8
Software updating
The player's software can be updated using one
of the methods shown below.
 Connecting to the Internet.
 Using a disc.
 Using a USB flash drive.
Product information on this player is provided
on the Pioneer website. Check the website
shown on page 10 for update and service
information on your Blu-ray disc player.
Caution
 Do not unplug the power cord or remove the USB
flash drive/disc during software updating. Also,
do not press the reset button during updating.
Otherwise, the updating will be aborted and
malfunction may occur with the player.
 There are two processes for software updating,
downloading and updating. Both processes may
take a certain period of time.
 Other operations are defeated during software
updating. Furthermore, updating process cannot
be canceled.
Updating connecting to the Internet
Note
yDepending on the Internet connection
conditions, downloading may take a long time.
ySteps 1 to 5 are the operations performed by
the user (they are intended to download the
software from the Internet).
ySteps 6 to 8 are the operations performed
(automatically) by the player (they are intended
to update the software).
1. Connect to the Internet.
2. When playback is stopped, display the
Home Menu screen.
Press HOME MENU.
3. Select and set Initial Setup.
Use / to select, then press ENTER.
4. Select and set Options A Update A
Network A Start.
Use / to select, then press ENTER.
5. Select and set Start.
Press ENTER.
6. Downloading of the software start.
The software download status is displayed
on the screen.
yDepending on the Internet connection
conditions, software downloading may
take a certain period of time.
7. Updating starts.
ySoftware updating may take a certain
period of time.
8. Updating completes.
This unit automatically restarts.
Advanced settings84
En
Advanced settings
8
Updating using a USB flash drive/disc
Note
y:KHQDQXSGDWHILOHLVSURYLGHGRQWKH3LRQHHU
website, use your computer to download it
onto a USB flash drive or disc. Carefully read
the instructions on downloading update files
provided on the Pioneer website.
yStore the update file in the root directory of the
USB flash drive or disc. Do not store it within a
folder.
yDo not put any files other than the update file
on the USB flash drive or disc.
y7RXSGDWHXVLQJDGLVFXVHD&'5RU&'5:
disc.
yThe player supports USB flash drive formatted
LQ)$7:KHQIRUPDWWLQJD86%IODVK
drive on your computer, do so with the settings
below.
– File system: FAT32
– Allocation unit size: Default allocation size
yOnly store the most recent update file on the
USB flash drive or disc.
yDo not use a USB extension cable to connect
a USB flash drive to the player. Using a USB
extension cable may prevent the player from
performing correctly.
ySteps 1 to 5 are the operations performed by
the user.
ySteps 6 to 7 are the operations performed
(automatically) by the player (they are intended
to update the software).
1. Plug in the USB flash drive or load the
disc on which the update file is stored.
2. When playback is stopped, display the
Home Menu screen.
Press HOME MENU.
3. Select and set Initial Setup.
Use / to select, then press ENTER.
4. Select and set Options A Update A
Disc or USB Storage A Start.
Use / to select, then press ENTER.
5. Select and set Yes.
Use / / / to select Yes, then press
ENTER.
6. Updating starts.
ySoftware updating may take a certain
period of time.
7. Updating completes.
Restoring all the settings to
the factory default settings
1. Check that the player's power is turned
on.
2. When playback is stopped, display the
Home Menu screen.
Press HOME MENU.
3. Select and set Initial Setup.
Use / to select, then press ENTER.
4. Select and set Options A Load Default
A Next Screen.
Use / to select, then press ENTER.
5. Select and set OK.
Use / to select, then press ENTER.
Note
yAfter restoring all the settings to the factory
default settings, use Setup Navigator to reset
the player (page 52).
Advanced settings 85
En
Advanced settings
8
Language code table and country/area code table
Language code table
Language name, language code, input code
Abkhazian, ab/abk, 0102
Afar, aa/aar, 0101
Afrikaans, af/afr, 0106
Albanian, sq/sqi, 1917
Amharic, am/amh, 0113
Arabic, ar/ara, 0118
Armenian, hy/hye, 0825
Assamese, as/asm, 0119
Aymara, ay/aym, 0125
Azerbaijani, az/aze, 0126
Bashkir, ba/bak, 0201
Basque, eu/eus, 0521
Belarusian, be/bel, 0205
Bengali, bn/ben, 0214
Bihari, bh/bih, 0208
Bislama, bi/bis, 0209
Breton, br/bre, 0218
Bulgarian, bg/bul, 0207
Burmese, my/mya, 1325
Catalan, ca/cat, 0301
Central Khmer, km/khm, 1113
Chinese, zh/zho, 2608
Corsican, co/cos, 0315
Croatian, hr/hrv, 0818
Czech, cs/ces, 0319
Danish, da/dan, 0401
Dutch, nl/nld, 1412
Dzongkha, dz/dzo, 0426
English, en/eng, 0514
Esperanto, eo/epo, 0515
Estonian, et/est, 0520
Finnish, /n, 0609
Fijian, /j, 0610
Faroese, fo/fao, 0615
French, fr/fra, 0618
Galician, gl/glg, 0712
Georgian, ka/kat, 1101
German, de/deu, 0405
Greek, el/ell, 0512
Guarani, gn/grn, 0714
Gujarati, gu/guj, 0721
Hausa, ha/hau, 0801
Hebrew, iw/heb, 0923
Hindi, hi/hin, 0809
Hungarian, hu/hun, 0821
Icelandic, is/isl, 0919
Indonesian, in/ind, 0914
Interlingua, ia/ina, 0901
Interlingue, ie/ile, 0905
Inupiaq, ik/ipk, 0911
Irish, ga/gle, 0701
Italian, it/ita, 0920
Japanese, ja/jpn, 1001
Javanese, jw/jav, 1023
Kalaallisut, kl/kal, 1112
Kannada, kn/kan, 1114
Kashmiri, ks/kas, 1119
Kazakh, kk/kaz, 1111
Kinyarwanda, rw/kin, 1823
Kirghiz, ky/kir, 1125
Korean, ko/kor, 1115
Kurdish, ku/kur, 1121
Lao, lo/lao, 1215
Latin, la/lat, 1201
Latvian, lv/lav, 1222
Lingala, ln/lin, 1214
Lithuanian, lt/lit, 1220
Macedonian, mk/mkd, 1311
Malagasy, mg/mlg, 1307
Malay, ms/msa, 1319
Malayalam, ml/mal, 1312
Maltese, mt/mlt, 1320
Maori, mi/mri, 1309
Marathi, mr/mar, 1318
Mongolian, mn/mon, 1314
Moldavian, mo/mol, 1315
Nauru, na/nau, 1401
Nepali, ne/nep, 1405
Norwegian, no/nor, 1415
Occitan, oc/oci, 1503
Oriya, or/ori, 1518
Oromo, om/orm, 1513
Panjabi, pa/pan, 1601
Persian, fa/fas, 0601
Polish, pl/pol, 1612
Portuguese, pt/por, 1620
Pushto, ps/pus, 1619
Quechua, qu/que, 1721
Romanian, ro/ron, 1815
Romansch, rm/roh, 1813
Rundi, rn/run, 1814
Russian, ru/rus, 1821
Samoan, sm/smo, 1913
Sango, sg/sag, 1907
Sanskrit, sa/san, 1901
Scottish Gaelic, gd/gla, 0704
Serbian, sr/srp, 1918
Serbo-Croatian, sh/---, 1908
Shona, sn/sna, 1914
Sindhi, sd/snd, 1904
Sinhalese, si/sin, 1909
Slovak, sk/slk, 1911
Slovenian, sl/slv, 1912
Somali, so/som, 1915
Sotho, Southern, st/sot, 1920
Spanish, es/spa, 0519
Sundanese, su/sun, 1921
Swahili, sw/swa, 1923
Swati, ss/ssw, 1919
Swedish, sv/swe, 1922
Tagalog, tl/tgl, 2012
Tajik, tg/tgk, 2007
Tamil, ta/tam, 2001
Tatar, tt/tat, 2020
Telugu, te/tel, 2005
Thai, th/tha, 2008
Tibetan, bo/bod, 0215
Tigrinya, ti/tir, 2009
Tonga (Tonga Islands), to/ton, 2015
Tsonga, ts/tso, 2019
Tswana, tn/tsn, 2014
Turkmen, tk/tuk, 2011
Turkish, tr/tur, 2018
Twi, tw/twi, 2023
Ukrainian, uk/ukr, 2111
Urdu, ur/urd, 2118
Uzbek, uz/uzb, 2126
Vietnamese, vi/vie, 2209
Volapuk, vo/vol, 2215
:HOVKcy/cym, 0325
:HVWHUQ)ULVLDQfy/fry, 0625
:RORIwo/wol, 2315
Xhosa, xh/xho, 2408
Yiddish, ji/yid, 1009
Yoruba, yo/yor, 2515
Zulu, zu/zul, 2621
Country/area code table
Country/Area name, Country/Area code, input code
Anguilla, ai, 0109
Antigua and Barbuda, ag, 0107
Argentina, ar, 0118
Armenia, am, 0113
Australia, au, 0121
Austria, at, 0120
Azerbaijan, az, 0126
Bahamas, bs, 0219
Barbados, bb, 0202
Belarus, by, 0225
Belgium, be, 0205
Belize, bz, 0226
Bermuda, bm, 0213
Brazil, br, 0218
Bulgaria, bg, 0207
Canada, ca, 0301
Cayman Islands, ky, 1125
Chile, cl, 0312
China, cn, 0314
Colombia, co, 0315
Croatia, hr, 0818
Cyprus, cy, 0325
Czech Republic, cz, 0326
Denmark, dk, 0411
Dominica, dm, 0413
Dominican Republic, do, 0415
Estonia, ee, 0505
Finland, , 0609
France, fr, 0618
Georgia, ge, 0705
Germany, de, 0405
Greece, gr, 0718
Greenland, gl, 0712
Grenada, gd, 0704
Guyana, gy, 0725
Haiti, ht, 0820
Hong Kong, hk, 0811
Hungary, hu, 0821
Iceland, is, 0919
India, in, 0914
Indonesia, id, 0904
Ireland, ie, 0905
Israel, il, 0912
Italy, it, 0920
Jamaica, jm, 1013
Japan, jp, 1016
Kazakhstan, kz, 1126
Korea, Republic of, kr, 1118
Kyrgyzstan, kg, 1107
Latvia, lv, 1222
Liechtenstein, li, 1209
Lithuania, lt, 1220
Luxembourg, lu, 1221
Macedonia, the Former
Yugoslav Republic of, mk, 1311
Malaysia, my, 1325
Malta, mt, 1320
Mexico, mx, 1324
Moldova, Republic of, md, 1304
Monaco, mc, 1303
Montserrat, ms, 1319
Netherlands, nl, 1412
New Zealand, nz, 1426
Norway, no, 1415
Pakistan, pk, 1611
Peru, pe, 1605
Philippines, ph, 1608
Poland, pl, 1612
Portugal, pt, 1620
Puerto Rico, pr, 1618
Romania, ro, 1815
Russian Federation, ru, 1821
Saint Kitts and Nevis, kn, 1114
Saint Lucia, lc, 1203
Saint Vincent and the
Grenadines, vc, 2203
San Marino, sm, 1913
Singapore, sg, 1907
Slovakia, sk, 1911
Slovenia, si, 1909
Spain, es, 0519
Suriname, sr, 1918
Sweden, se, 1905
Switzerland, ch, 0308
Taiwan, Province of China, tw,
2023
Tajikistan, tj, 2010
Thailand, th, 2008
Trinidad and Tobago, tt, 2020
Tunisia, tn, 2014
Turkey, tr, 2018
Turkmenistan, tm, 2013
Turks and Caicos Islands, tc,
2003
Ukraine, ua, 2101
United Kingdom, gb, 0702
United States, us, 2119
Uruguay, uy, 2125
Uzbekistan, uz, 2126
Venezuela, ve, 2205
Virgin Islands, British, vg, 2207
Troubleshooting86
En
Troubleshooting
9
Chapter 9
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something
wrong with this component, check the points below. Sometimes the trouble may lie in another
component. Inspect the other components and electrical appliances being used. If the trouble
cannot be rectified even after checking the points below, ask your nearest Pioneer authorized
service center or your dealer to carry out repair work.
Picture
Problem Check Remedy
No picture is displayed
or the picture is not
displayed properly.
Is the video cable properly
connected?
yConnect the cable properly according to the connected devices (page
42).
yDisconnect the cable (video/audio cable or HDMI cable), then reinsert
it firmly and all the way in.
Is the video cable damaged? If the cable is damaged, replace it with a new one.
Is the input setting on the
connected TV right?
Read the operating instructions for the connected components and
switch to the proper input.
Is the output video resolution
properly set? Press RESOLUTION to switch the video resolution output from the HDMI
OUT terminal (page 18).
yIs the player connected with
an HDMI cable other than
a High Speed HDMI® cable
(with a Standard HDMI®
cable)?
yAre you using an HDMI cable
with a built-in equalizer?
1080p or Deep Color video signals may not be output properly,
depending on the HDMI cable being used or the player's settings. If you
wish to output the video signals with 1080p or Deep Color, connect the
TV using a High Speed HDMI® cable without a built-in equalizer, then
reset the player using the Setup Navigator (page 52).
Is a DVI device connected? The picture may not be displayed properly if a DVI device is connected.
Is Color Space properly set? Change the Color Space setting (page 77).
No picture is displayed
or picture is not output
in high definition when
playing BDs.
:LWKVRPHGLVFVLWPD\QRWEHSRVVLEOHWRRXWSXWWKHYLGHRVLJQDOVIURP
the VIDEO output terminal. In this case, connect using an HDMI cable
(page 42).
yPicture is disturbed
during playback.
yPicture is dark.
y7KLVSOD\HUVXSSRUWV5RYLDQDORJFRS\SURWHFWLRQWHFKQRORJ\:LWK
some TVs (such as with built-in video deck), the picture will not be
displayed properly when the copy protected DVD title is played. This is
not a malfunction.
yIf the player and TV are connected via a DVD recorder/video deck,
etc., the picture will not be displayed properly due to analog copy
protection. Connect the player and TV directly.
yPicture is stretched.
yPicture is cropped.
yAspect ratio cannot be
switched.
Is the TV's aspect ratio properly
set?
Read the operating instructions for the TV and set the TV's aspect ratio
properly.
Is TV Screen properly set? Set TV Screen properly (page 76).
:KHQYLGHRVLJQDOVZLWKDUHVROXWLRQRILSS
1080/24p, 1080/60i, 1080/60p or 720/60p are being output from the
HDMI OUT terminal, they may be output with an aspect ratio of 16:9
even if TV Screen is set to 4:3 Pan&Scan (page 76).
Picture is interrupted. The picture may be interrupted when the resolution of the recorded
video signal switches. Press RESOLUTION to select a setting other than
Auto (page 77).
Blu-ray 3D disc playback
does not output 3D views.
yConnect the player to your TV with HDMI cable (High Speed HDMI™
Cable).
yYour TV may not support “HDMI 3D mandatory format”.
Troubleshooting 87
En
Troubleshooting
9
Sound
Problem Check Remedy
yNo sound is output.
ySound is not output
properly.
yIs the disc played back in
slow motion?
yIs the disc played back in fast
forward or fast reverse?
No sound is output during slow motion play and forward and reverse
scanning.
Are the cables properly
connected?
yConnect the cable properly according to the connected devices
(page 42).
yInsert the cable firmly and all the way in.
Is the audio cable damaged? If the cable is damaged, replace it with a new one.
Is Audio Output properly set? Set Audio Output properly, according to the connected device
(page 77).
Are the connected components
properly set?
Read the operating instructions for the connected components and
check the volume, input, speaker settings, etc.
Multi-channel sound is
not output.
Is multi-channel sound
selected? Use the menu screen or AUDIO to switch the disc's sound to multi-
channel.
No sound from surround
or center speaker.
yCheck to confirm that the speakers are connected properly.
yCheck the volume setting in the Speaker Setup for Audio Menu menu
(page 77).
No sound from the sub-
woofer.
:KHQWKHDXGLRVLJQDOEHLQJSOD\HGKDVQREDVVFRPSRQHQWQRVRXQG
will come from the sub-woofer.
Check the volume setting in the Speaker Setup for Audio Menu (page 77).
Excessive noise during
radio reception.
yConnect an antenna and set to the best reception position.
ySet an FM antenna outside the house.
yTurn power off the electric devices that may be causing the noise or
move these devices away from this unit.
Playback
Problem Check Remedy
yDisc does not play.
yDisc tray opens
automatically.
Is the disc one that is playable
on this player?
Check whether the disc is one that can be played on this player
(page 11).
Is the file one that is playable
on this player?
yCheck whether the file is one that can be played on this player (page 15).
yCheck whether or not the file is damaged.
Is the disc scratched? It may not be possible to play scratched discs.
Is the disc dirty? Clean the disc (page 94).
Is there a piece of paper or
sticker attached to the disc?
The disc may be warped and unplayable.
Is the disc properly set in the
disc tray?
ySet the disc with the printed side facing up.
ySet the disc properly in the depression in the disc tray.
Is the region number correct? See page 13 for the region numbers of discs that can be played on this
player.
Picture freezes and the
front panel and remote
control buttons stop
working.
yPress (#)STOP to stop playback, then restart playback.
yIf the playback cannot be stopped, press 1STANDBY/ON on the
player's front panel to turn off the power, then turn the power back on.
yPress 1STANDBY/ON on the player for more than 5 seconds. The unit
reboots, and the operation becomes possible.
The subtitles cannot be
switched.
The subtitles cannot be switched for discs recorded on a DVD or BD
recorder.
After a disc is inserted,
Loading stays displayed
and playback does not
start.
Are there too many files
recorded on the disc?
:KHQDGLVFRQZKLFKILOHVDUHUHFRUGHGLVLQVHUWHGGHSHQGLQJRQWKH
number of files recorded on the disc, loading may take several dozen
minutes.
(#) is displayed in file
names, etc.
The characters that cannot be displayed on this player are displayed in
(#).
A message indicating low
memory appears while
playing a BD-ROM disc.
yConnect a USB device (page 51).
yErase the data stored on the connected USB device from BUDA Setup
(page 81).
Troubleshooting88
En
Troubleshooting
9
Control function
Problem Check Remedy
Control function does not
work.
Is the HDMI cable properly
connected? To use the Control function, connect the Flat Screen TV to the HDMI
OUT terminal (page 42).
Is the HDMI cable you are
using a High Speed HDMI®
Cable?
Use a High Speed HDMI® Cable. The Control function may not work
properly if an HDMI cable other than a High Speed HDMI® Cable is
used.
Is this player connected to the
TV using an HDMI cable to
watch the picture?
If video signals are being output from a terminal other than the HDMI
OUT terminal, the Control function does not work. Connect to the TV
using an HDMI cable (page 42).
Does the connected device
support the Control function?
yThe Control function will not work with devices of other brands that
do not support the Control function, even when connected using an
HDMI cable.
yThe Control function will not work if devices that do not support the
Control function are connected between the Control-compatible
device and the player.
ySee page 16.
yEven when connected to a Pioneer product compatible with the
Control function, some of the functions may not work.
Also refer to the operating instructions for the connected device.
Is Control set to On on the
connected device?
Set Control to On on the connected device. The Control function
operates when Control is set to On for all devices connected to the
HDMI OUT terminal.
Once connections and settings of all the devices are finished, be sure
to check that the player's picture is output to the Flat Screen TV. (Also,
check after changing the connected devices and connecting and/or
disconnecting HDMI cables.) If the player's picture is not being output
to the Flat Screen TV, the Control function may not work properly.
For details, refer to the operating instructions of the connected device.
Network
Problem Check Remedy
yBD-LIVE function
(connection to the
Internet) cannot be
used.
y"No valid id file found!"
is displayed when I try
to update the software.
Perform Connection Test (page 81). If "Networks is OK." is displayed,
check the proxy server settings (page 81). Also, there may be a problem
with the Internet connection. Contact your Internet service provider.
Software updating is slow. Depending on the Internet connection and other conditions, some time
may be required to update the software.
A message other than
"Networks is OK."
is displayed when
Connection Test is
performed.
Is "Network is FAILED."
displayed?
yCheck that this player and the Ethernet hub (or router with a hub
functionality) are properly connected.
yIf the IP address is obtained using the DHCP server function, check
the setting is correct at the Information (page 78). For details on the
DHCP server function, see the operating instructions for the Ethernet
hub (or router with a hub functionality).
ySet the IP address manually.
yCheck the operation and settings of the DHCP server function of the
Ethernet hub (or router with hub functionality). For details on the
DHCP server function, see the operating instructions for the Ethernet
hub (or router with a hub functionality).
yIf this player has been set manually, reset the IP address of this player
or other components.
Is the Ethernet hub (or router
with a hub functionality)
operating properly?
yCheck the settings and operation the Ethernet hub (or router with a
hub functionality). For details, see the operating instructions for the
Ethernet hub.
yReboot the Ethernet hub (or router with a hub functionality).
Troubleshooting 89
En
Troubleshooting
9
Others
Problem Check Remedy
Power does not
turned on.
Is the power cord properly
connected?
yPlug the power cord securely into the power outlet.
yUnplug the power cord, wait several seconds, then plug the power
cord back in.
Power turns OFF without
warning
Auto Power O is set. The display will move to screen saver mode in 5
minutes and will automatically power OFF in about 30 minutes.
The player's power turns
off automatically. Is Control set to On?The player's power may turn off together with the power of the TV
connected to the HDMI OUT terminal. If you do not want the player's
power to turn off when the TV's power is turned off, set Control to O
(page 77).
The player's power turns
on automatically. Is Control set to On?The player's power may turn on together with the power of the TV
connected to the HDMI OUT terminal. If you do not want the player's
power to turn on when the TV's power is turned on, set Control to O
(page 77).
Cannot be operated with
the remote control.
Are you operating the remote
control from a point too far
away from the player?
Operate from within 7 m of the remote control sensor.
Are the batteries dead? Replace the batteries (page 10).
Settings I have made have
been cleared.
yHave you disconnected the
power cord while the player's
power was on?
yHas there been a power
failure?
Always press 1STANDBY/ON on the player's front panel or 1STANDBY/
ONRQWKHUHPRWHFRQWUROFKHFNWKDW32:(52))KDVWXUQHGRIIIURP
the player's front panel display and wait for more than 10 seconds
before disconnecting the power cord. Be particularly careful when the
power cord is connected to the AC outlet on another device because
the player turns off in conjunction with the device.
USB (external storage)
device does not work with
this player properly.
Is the USB device properly
connected?
yTurn the player's power off, then turn the power back on.
yTurn the player's power off, then reconnect the external storage device
(page 51).
Is the USB device connected
via an extension cable?
Do not use an extension cable. The player may not work properly with it.
Is the external storage device
connected to the USB port via
a memory card reader or USB
hub?
External storage device may not work if connected to the USB port via a
memory card reader or USB hub.
Does the external storage
device contain multiple
partitions?
External storage devices may not be recognized if they contain multiple
partitions.
Some external storage devices may not operate.
Is the external storage device
write-protected?
Turn the player's power off, then disable the write-protection.
Is the external storage device's
file system FAT16 or FAT32?
Only external storage devices with a FAT16 or FAT32 file system can be
used.
Turn the player's power off, then turn the power back on.
Display window is dark Press the DIMMER on the remote and select the desired display
brightness.
Appendix90
En
Appendix
10
Chapter 10
Appendix
Specications
General for HTZ-BD52/HTZ-BD32
Power requirements AC 120 V, 50 Hz/60 Hz
Power consumption 190 W (In Standby mode: Less than 0.5 W)
Dimensions (W x H x D) Approx. 430 mm x 345 mm x 63 mm
Net Weight (Approx.) 3.4 kg
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 85 %
General for HTZ-BD92HW/HTZ-BD82HF
Power requirements AC 120 V, 50 Hz/60 Hz
Power consumption 105 W (In Standby mode: Less than 0.5 W)
Dimensions (W x H x D) Approx. 430 mm x 345 mm x 63 mm
Net Weight (Approx.) 3.3 kg
Operating temperature 5 °C to 35 °C
Operating humidity 5 % to 85 %
Inputs/Outputs
VIDEO OUT 9SSV\QFQHJDWLYH5&$MDFN[
+'0,,1287YLGHRDXGLR 19 pin (HDMI®/™ Connector)
ANALOG AUDIO IN 9UPVN+]G%5&$MDFN/5[
DIGITAL IN (OPTICAL) 9SS2SWLFDOMDFN[N+]N+]VDPSOLQJ
3257$%/(,1 9UPVPPVWHUHRMDFN
$'$37(53257 5 V, 100 mA
MIC 0LFMDFN[
USB 4 pin A Type x 2
Tuner
)07XQLQJ5DQJH 87.5 MHz to 108.0 MHz
Antenna input XQEDODQFHG
Appendix 91
En
Appendix
10
Amplier for HTZ-BD52/HTZ-BD32
3RZHURXWSXW5067+'
Total 1100 W
Front :ð
Center :
5HDU :ð
Sub-Woofer :
Amplier for HTZ-BD92HW/HTZ-BD82HF
3RZHURXWSXW5067+'
Total 550 W
Front :ð
Sub-Woofer :
System
Laser Semiconductor laser
Signal system Standard PAL/NTSC colour TV system
LAN port (WKHUQHWMDFN[%$6(7%$6(7;
Wireless LAN (internal
antenna)
Integrated IEEE 802.11n (2.4 GHz band) wireless networking
access, compatible with 802.11b/g Wi-Fi networks.
Bus Power Supply (USB) DC 5 V 500 mA
Speakers for HTZ-BD52
S-BD422
 )URQW/HIW5LJKW
Type 2 Way Net Dimensions
(W x H x D) 250 mm x 1110 mm x 250 mm
,PSHGDQFH5DWHG  Net Weight 3.5 kg
 6XUURXQGVSHDNHU/HIW5LJKW
Type 1 Way Net Dimensions
(W x H x D) 250 mm x 1110 mm x 250 mm
,PSHGDQFH5DWHG  Net Weight 3.4 kg
 Center speaker
Type 1 Way Net Dimensions
(W x H x D) 230 mm x 80 mm x 90 mm
,PSHGDQFH5DWHG  Net Weight 0.7 kg
 Subwoofer
Type 1 Way Net Dimensions
(W x H x D) 130.5 mm x 420 mm x 375 mm
,PSHGDQFH5DWHG  Net Weight 4.4 kg
Appendix92
En
Appendix
10
Speakers for HTZ-BD32
S-BD122
 )URQW6XUURXQGVSHDNHU/HIW5LJKW
Type 1 Way Net Dimensions
(W x H x D) 95 mm x 80 mm x 90 mm
,PSHGDQFH5DWHG  Net Weight 0.3 kg
 Center speaker
Type 1 Way Net Dimensions
(W x H x D) 230 mm x 80 mm x 90 mm
,PSHGDQFH5DWHG  Net Weight 0.7 kg
 Subwoofer
Type 1 Way Net Dimensions
(W x H x D) 130.5 mm x 420 mm x 375 mm
,PSHGDQFH5DWHG  Net Weight 4.4 kg
Speakers for HTZ-BD92HW
S-BD922HW
 Front speaker
Type 2 Way Net Dimensions
(W x H x D) 900 mm x 66 mm x 93 mm
,PSHGDQFH5DWHG  Net Weight 1.6 kg
S-BD922HW
 Subwoofer
Type 1 Way Net Dimensions
(W x H x D) 130.5 mm x 420 mm x 375 mm
,PSHGDQFH5DWHG  Net Weight 4.4 kg
Speakers for HTZ-BD82HF
S-BD822HF
 )URQWVSHDNHU/HIW5LJKW
Type 2 Way Net Dimensions
(W x H x D)
207 mm x 100 mm x 100 mm
(lengthwise putting)
100 mm x 225 mm x 100 mm
(side putting)
,PSHGDQFH5DWHG  Net Weight 0.4 kg
 Subwoofer
Type 1 Way Net Dimensions
(W x H x D) 130.5 mm x 420 mm x 375 mm
,PSHGDQFH5DWHG  Net Weight 4.4 kg
 'HVLJQDQGVSHFLILFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH
Appendix94
En
Appendix
10
Maintenance
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Keeping the exterior surfaces clean
 Do not use volatile liquids such as insecticide
spray near the unit.
 :LSLQJZLWKVWURQJSUHVVXUHPD\GDPDJH
the surface.
 Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might
damage the surface of the unit.
Maintaining the unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service center.
Notes on discs
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints
do not get on the surface. Never stick paper or
tape on the disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion.
Before playing, clean the disc with a clean
FORWK:LSHWKHGLVFIURPWKHFHQWHUWRRXW
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
Appendix 95
En
Appendix
10
Important Information
Relating to Network
Services
All information, data, documents,
communications, downloads, files, text,
images, photographs, graphics, videos,
webcasts, publications, tools, resources,
software, code, programs, applets, widgets,
applications, products and other content
(“Content”) and all services and offerings
(“Services”) provided or made available by
or through any third party (each a “Service
Provider”) is the sole responsibility of the
Service Provider from whom it originated.
The availability of and access to Content and
Services furnished by the Service Provider
through the PIONEER Device are subject
to change at any time, without prior notice,
including, but not limited to the suspension,
removal or cessation of all or any part of the
Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to
the Service Provider’s website for the most
up-to-date information. PIONEER is neither
responsible nor liable for customer service
related to the Content and Services. Any
question or request for service relating to the
Content or Services should be made directly to
the respective Content and Service Providers.
Please note that PIONEER is not responsible
for any Content or Services provided by the
Service Provider or any changes to, removal of,
or cessation of such Content or Services and
does not warrant or guaranty the availability of
or access to such Content or Services.
© 2012 PIONEER CORPORATION.
All rights reserved.
Nous vous remercions d’avoir acquis un produit Pioneer.
Veuillez lire attentivement ce mode d’emploi afin de connaître la manière d’utiliser l’appareil comme il convient.
Cela fait, conservez le mode d’emploi de façon à pouvoir vous y référer en cas de nécessité.
Ce point d’exclamation, placé dans un
triangle équilatéral, a pour but d’attirer
l’attention de l’utilisateur sur la présence,
dans les documents qui accompagnent
l’appareil, d’explications importantes du
point de vue de l’exploitation ou de
l’entretien.
Ce symbole de l’éclair, placé dans un
triangle équilatéral, a pour but d’attirer
l’attention de l’utilisateur sur la présence, à
l’intérieur du coffret de l’appareil, de
“tensions dangereuses” non isolées d’une
grandeur suffisante pour représenter un
risque d’électrocution pour les êtres
humains.
ATTENTION :
POUR ÉVITER TOUT RISQUE
D’ÉLECTROCUTION, NE PAS ENLEVER LE
COUVERCLE (NI LE PANNEAU ARRIÈRE).
AUCUNE PIÈCE RÉPARABLE PAR
L’UTILISATEUR NE SE TROUVE À
L’INTÉRIEUR. CONFIER TOUT ENTRETIEN À
UN PERSONNEL QUALIFIÉ UNIQUEMENT.
ATTENTION
DANGER D´ELECTROCUTION
NE PAS OUVRIR
IMPORTANT
D3-4-2-1-1_A1_Fr
ATTENTION
Cet appareil est un produit laser de Classe 1, classé
selon l’article IEC 60825-1:2007 relatif à la Sécurité
des produits laser.
APPAREIL À LASER DE CLASSE 1
D58-5-2-2a_A2_Fr
AVERTISSEMENT
Cet appareil n’est pas étanche. Pour éviter les risques
d’incendie et de décharge électrique, ne placez près de
lui un récipient rempli d’eau, tel qu’un vase ou un pot
de fleurs, et ne l’exposez pas à des gouttes d’eau, des
éclaboussures, de la pluie ou de l’humidité.
D3-4-2-1-3_A1_Fr
AVERTISSEMENT
Avant de brancher l’appareil pour la première, lisez
attentivement la section suivante.
La tension de l’alimentation électrique disponible
varie selon le pays ou la région. Assurez-vous que
la tension du secteur de la région où l’appareil sera
utilisé correspond à la tension requise (par ex. 230
V ou 120 V), indiquée sur le panneau arrière.
D3-4-2-1-4*_A1_Fr
PRÉCAUTION DE VENTILATION
Lors de l’installation de l’appareil, veillez à laisser un
espace suffisant autour de ses parois de manière à
améliorer la dissipation de chaleur (au moins 10 cm sur
le dessus, 10 cm à l’arrière et 10 cm de chaque côté).
AVERTISSEMENT
Les fentes et ouvertures du coffret sont prévues pour la
ventilation, pour assurer un fonctionnement stable de
l’appareil et pour éviter sa surchauffe. Pour éviter les
risques d’incendie, ne bouchez jamais les ouvertures et
ne les recouvrez pas d’objets, tels que journaux, nappes
ou rideaux, et n’utilisez pas l’appareil posé sur un tapis
épais ou un lit.
D3-4-2-1-7b*_A1_Fr
Milieu de fonctionnement
Température et humidité du milieu de fonctionnement :
De +5 °C à +35 °C (de +41 °F à +95 °F) ; Humidité
relative inférieure à 85 % (orifices de ventilation non
obstrués)
N’installez pas l’appareil dans un endroit mal ventilé ou
un lieu soumis à une forte humidité ou en plein soleil
(ou à une forte lumière artificielle). D3-4-2-1-7c*_A1_Fr
Lorsque vous utilisez ce produit, vérifiez les
informations concernant la sécurité sous l’appareil.
D3-4-2-2-4_B1_Fr
Consignes de sécurité
P1-4-2-2_Fr
Cet appareil numérique de la Classe B est conforme
à la norme NMB-003 du Canada.
D8-10-1-3_A1_Fr
Si la fiche d’alimentation secteur de cet appareil ne
convient pas à la prise secteur à utiliser, la fiche doit
être remplacée par une appropriée. Ce
remplacement et la fixation d’une fiche secteur sur le
cordon d’alimentation de cet appareil doivent être
effectués par un personnel de service qualifié. En cas
de branchement sur une prise secteur, la fiche de
coupure peut provoquer une sérieuse décharge
électrique. Assurez-vous qu’elle est éliminée
correctement après sa dépose.
L’appareil doit être déconnecté en débranchant sa
fiche secteur au niveau de la prise murale si vous
prévoyez une période prolongée de non utilisation
(par exemple avant un départ en vacances).
D3-4-2-2-1a_A1_Fr
ATTENTION
L’interrupteur 1STANDBY/ON de cet appareil ne
coupe pas complètement celui-ci de sa prise secteur.
Comme le cordon d’alimentation fait office de
dispositif de déconnexion du secteur, il devra être
débranché au niveau de la prise secteur pour que
l’appareil soit complètement hors tension. Par
conséquent, veillez à installer l’appareil de telle
manière que son cordon d’alimentation puisse être
facilement débranché de la prise secteur en cas
d’accident. Pour éviter tout risque d’incendie, le
cordon d’alimentation sera débranché au niveau de
la prise secteur si vous prévoyez une période
prolongée de non utilisation (par exemple avant un
départ en vacances).
D3-4-2-2-2a*_A1_Fr
NOTE IMPORTANTE SUR LE CABLE
D’ALIMENTATION
Tenir le câble d’alimentation par la fiche. Ne pas
débrancher la prise en tirant sur le câble et ne pas
toucher le câble avec les mains mouillées. Cela risque
de provoquer un court-circuit ou un choc électrique. Ne
pas poser l’appareil ou un meuble sur le câble. Ne pas
pincer le câble. Ne pas faire de noeud avec le câble ou
l’attacher à d’autres câbles. Les câbles d’alimentation
doivent être posés de façon à ne pas être écrasés. Un
câble abîmé peut provoquer un risque d’incendie ou un
choc électrique. Vérifier le câble d’alimentation de temps
en temps. Contacter le service après-vente PIONEER le
plus proche ou le revendeur pour un remplacement.
S002*_A1_Fr
Ce produit est destiné à une utilisation domestique
générale. Toute panne due à une utilisation autre qu'à
des fins privées (comme une utilisation à des fins
commerciales dans un restaurant, dans un autocar
ou sur un bateau) et qui nécessite une réparation
sera aux frais du client, même pendant la période de
garantie. K041_A1_Fr
AVERTISSEMENT
Pour éviter les risques d’incendie, ne placez aucune
flamme nue (telle qu’une bougie allumée) sur l’appareil.
D3-4-2-1-7a_A1_Fr
Condensation
Si vous transportez sans transition le lecteur d’un
endroit froid dans un pièce chaude (en hiver, par
exemple), ou si la température de la pièce où se trouve
le lecteur augmente rapidement, des gouttelettes d’eau
(condensation) peuvent se former à l’intérieur du
lecteur (sur les pièces et la lentille). En cas de
condensation, le lecteur ne fonctionne pas
correctement et la lecture n’est pas possible. Laissez le
lecteur en service pendant 1 ou 2 heures à la
température ambiante (pour que l’humidité ait le temps
de s’évaporer). Les gouttelettes d’eau se dissiperont et
la lecture sera de nouveau possible.
De la condensation peut aussi se former en été si le
lecteur est exposé à l’air d’un climatiseur. Dans ce cas,
éloignez le lecteur du climatiseur.
S005_A1_Fr
La protection de votre ouïe est entre vos
mains
Pour assurer le rendement optimal de votre matériel
et – plus important encore – la protection de votre ouïe,
réglez le volume à un niveau raisonnable. Pour ne pas
altérer votre sens de la perception, le son doit être clair
mais ne produire aucun vacarme et être exempt de
toute distorsion. Votre ouïe peut vous jouer des tours.
Avec le temps, votre système auditif peut en effet
s’adapter à des volumes supérieurs, et ce qui vous
semble un « niveau de confort normal » pourrait au
contraire être excessif et contribuer à endommager
votre ouïe de façon permanente. Le réglage de votre
matériel à un volume sécuritaire AVANT que votre ouïe
s’adapte vous permettra de mieux vous protéger.
CHOISISSEZ UN VOLUME SÉCURITAIRE:
Réglez d’abord le volume à un niveau inférieur.
Montez progressivement le volume jusqu’à un niveau
d’écoute confortable ; le son doit être clair et exempt
de distorsions.
Une fois que le son est à un niveau confortable, ne
touchez plus au bouton du volume.
N’OUBLIEZ PAS DE RESPECTER LES
DIRECTIVES SUIVANTES:
Lorsque vous montez le volume, assurez-vous de
pouvoir quand même entendre ce qui se passe
autour de vous.
Faites très attention ou cessez temporairement
l’utilisation dans les situations pouvant s’avérer
dangereuses.
N’utilisez pas des écouteurs ou un casque d’écoute
lorsque vous opérez un véhicule motorisé ; une telle
utilisation peut créer des dangers sur la route et est
illégale à de nombreux endroits.
S001a_A1_Fr
AVERTISSEMENT
Toutes transformations ou modifications non expressément autorisées par l'autorité responsable de
la conformité de l'appareil pourraient faire perdre à l'utilisateur son droit d'utiliser cet appareil.
REMARQUE : LE FABRICANT NE SAURA ÊTRE TENU RESPONSABLE DE TOUTE INTERFÉRENCE
NUISIBLE AUX COMMUNICATIONS RADIO ET/OU TÉLÉVISION PROVOQUÉE PAR TOUTE
MODIFICATION NON AUTORISÉE APPORTÉE À CET APPAREIL. DE TELLES MODIFICATIONS
POURRAIENT ANNULER LE DROIT DE L'UTILISATEUR D'UTILISER L'APPAREIL.
Avertissement FCC
Cet appareil est conforme à la section 15 de la réglementation FCC. Le fonctionnement est soumis
aux deux conditions suivantes : (1) cet appareil ne peut causer d'interférences nuisibles et (2) il doit
accepter toute interférence reçue, notamment celles pouvant entraîner un dysfonctionnement.
Déclaration de la FCC sur l'exposition aux rayonnements RF
Cet appareil est conforme aux réglementations de la FCC sur les limites d'exposition aux
rayonnements électromagnétiques établies pour un environnement non contrôlé. Cet appareil et
son ou ses antennes ne doivent pas être installés ou utilisés conjointement avec une autre antenne
ou un autre émetteur.
“Pour respecter les exigences d'exposition aux rayonnements RF de la FCC, cet accord n'est
applicable qu'aux configurations mobiles. Les antennes utilisées pour cet émetteur doivent être
installées de manière à offrir une distance de séparation d'au moins 20 cm de toutes personnes
et ne doivent pas être situées ni fonctionner en conjonction avec une autre antenne ou un autre
émetteur.”
Avertissement de l'agence Industrie Canada
TCet appareil est conforme aux normes RSS exemptes de licence d'Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne peut causer
d'interférences nuisibles et (2) il doit accepter toute interférence reçue, notamment celles pouvant
entraîner un dysfonctionnement de l'appareil.
Précautions concernant le visionnage en 3D
 Si vous ressentez une fatigue ou une gêne pendant le visionnage d’images en 3D, cessez de les
regarder.
 Les enfants, en particulier ceux de moins de 6 ans, sont plus sensibles à la fatigue et les personnes en
charge doivent surveiller tout signe de fatigue ou de gêne.
 Pendant le visionnage d’images en 3D, faites régulièrement des pauses.
 /HYLVLRQQDJHSURORQJpG·LPDJHVHQ'VDQVSDXVHSHXWFDXVHUGHODIDWLJXHHWXQLQFRQIRUW
Información de seguridad
Le damos las gracias por la adquisición de este producto Pioneer.
Lea a fondo estas instrucciones de utilización para que aprenda a utilizar correctamente su modelo.
Después de haber terminado de leer estas instrucciones, guárdelas en un lugar seguro para, en caso de ser necesario,
consultarlas en el futuro.
El punto exclamativo dentro un triángulo
equilátero convenido para avisar el usuário
de la presencia de importantes
instrucciones sobre el funcionamiento y la
manutención en la libreta que acompaña el
aparato.
La luz intermitente con el símbolo de punta
de flecha dentro un triángulo equilátero.
Está convenido para avisar el usuario de la
presencia de “voltaje peligrosa” no aislada
dentro el producto que podría constituir un
peligro de choque eléctrico para las
personas.
ATENCIÓN:
PARA PREVENIR EL PELIGRO DE CHOQUE
ELÉCTRICO NO REMOVER LA TAPA NI LAS
PARTES DENTRO NO UTILIZADAS,
LLAMAR UNA PERSONA CUALIFICADA.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANTE
D3-4-2-1-1_A1_Es
PRECAUCIÓN
Este aparato es un producto de láser de clase 1
clasificado como tal en Seguridad de productos de
láser, IEC 60825-1:2007.
PRODUCTO LASER CLASE 1
D58-5-2-2a_A1_Es
ADVERTENCIA
Este aparato no es impermeable. Para evitar el riesgo
de incendio y de descargas eléctricas, no ponga ningún
recipiente lleno de líquido (como pueda ser un vaso o
un florero) cerca del aparato ni lo exponga a goteo,
salpicaduras, lluvia o humedad.
D3-4-2-1-3_A1_Es
ADVERTENCIA
Antes de enchufar el aparato a la corriente, lea la sección
siguiente con mucha atención.
La tensión de la red eléctrica es distinta según el
país o región. Asegúrese de que la tensión de la
alimentación de la localidad donde se proponga
utilizar este aparato corresponda a la tensión
necesaria (es decir, 230 V ó 120 V) indicada en el
panel posterior.
D3-4-2-1-4*_A1_Es
PRECAUCIÓN PARA LA VENTILACIÓN
Cuando instale este aparato, asegúrese de dejar
espacio en torno al mismo para la ventilación con el fin
de mejorar la disipación de calor (por lo menos 10 cm
encima, 10 cm detrás, y 10 cm en cada lado).
ADVERTENCIA
Las ranuras y aberturas de la caja del aparato sirven
para su ventilación para poder asegurar un
funcionamiento fiable del aparato y para protegerlo
contra sobrecalentamiento. Para evitar el peligro de
incendio, las aberturas nunca deberán taparse ni
cubrirse con nada (como por ejemplo, periódicos,
manteles, cortinas) ni ponerse en funcionamiento el
aparato sobre una alfombra gruesas o una cama.
D3-4-2-1-7b*_A1_Es
Entorno de funcionamiento
Temperatura y humedad del entorno de funcionamiento
+5 °C a +35 °C; menos del 85 % de humedad relativa
(rejillas de refrigeración no obstruidas)
No instale este aparato en un lugar mal ventilado, ni en
lugares expuestos a alta humedad o a la luz directa del
sol (o de otra luz artificial potente).
D3-4-2-1-7c*_A1_Es
Cuando utilice este producto, confirme la
información de seguridad mostrada en la parte
inferior de la unidad.
D3-4-2-2-4_B1_Es
PRECAUCIÓN
El interruptor de la alimentación 1 STANDBY/ON de
este aparato no corta por completo toda la
alimentación de la toma de corriente de CA. Puesto
que el cable de alimentación hace las funciones de
dispositivo de desconexión de la corriente para el
aparato, para desconectar toda la alimentación del
aparato deberá desenchufar el cable de la toma de
corriente de CA. Por lo tanto, asegúrese de instalar
el aparato de modo que el cable de alimentación
pueda desenchufarse con facilidad de la toma de
corriente de CA en caso de un accidente. Para evitar
correr el peligro de incendio, el cable de
alimentación también deberá desenchufarse de la
toma de corriente de CA cuando no se tenga la
intención de utilizarlo durante mucho tiempo
seguido (por ejemplo, antes de irse de vacaciones).
D3-4-2-2-2a*_A1_Es
Si la clavija del cable de alimentación de CA de este
aparato no se adapta a la toma de corriente de CA
que usted desea utilizar, deberá cambiar la clavija por
otra que se adapte apropiadamente. El reemplazo y
montaje de una clavija del cable de alimentación de
CA sólo deberá realizarlos personal de servicio
técnico cualificado. Si se enchufa la clavija cortada a
una toma de corriente de CA, puede causar fuertes
descargas eléctricas. Asegúrese de que se tira de la
forma apropiada después de haberla extraído.
El aparato deberá desconectarse desenchufando la
clavija de la alimentación de la toma de corriente
cuando no se proponga utilizarlo durante mucho
tiempo (por ejemplo, antes de irse de vacaciones).
D3-4-2-2-1a_A1_Es
Entorno de funcionamiento
Temperatura y humedad del entorno de funcionamiento
+5 °C a +35 °C; menos del 85 % de humedad relativa
(rejillas de refrigeración no obstruidas)
No instale este aparato en un lugar mal ventilado, ni en
lugares expuestos a alta humedad o a la luz directa del
sol (o de otra luz artificial potente).
D3-4-2-1-7c*_A1_Es
Este producto es para tareas domésticas generales.
Cualquiera avería debida a otra utilización que tareas
domésticas (tales como el uso a largo plazo para
motivos de negocios en un restaurante o el uso en un
coche o un barco) y que necesita una reparación
hará que cobrarla incluso durante el período de
garantía.
K041_A1_Es
PRECAUCIONES CONCERNIENTES A LA
MANIPULACIÓN DEL CABLE DE
ALIMENTACIÓN
Tome el cable de alimentación por la clavija. No
extraiga la clavija tirando del cable. Nunca toque el
cable de alimentación cuando sus manos estén
mojadas, ya que esto podría causar cortocircuitos o
descargas eléctricas. No coloque la unidad, algún
mueble, etc., sobre el cable de alimentación.
Asegúrese de no hacer nudos en el cable ni de unirlo a
otros cables. Los cables de alimentación deberán ser
dispuestos de tal forma que la probabilidad de que
sean pisados sea mínima. Una cable de alimentación
dañado podrá causar incendios o descargas eléctricas.
Revise el cable de alimentación está dañado, solicite el
reemplazo del mismo al centro de servicio autorizado
PIONEER más cercano, o a su distribuidor.
S002*_A1_Es
ADVERTENCIA
Para evitar el peligro de incendio, no ponga nada con
fuego encendido (como pueda ser una vela) encima del
aparato. D3-4-2-1-7a_A1_Es
PRECAUCIÓN
Los cambios o modificaciones no aprobados expresamente por la parte responsable de la
conformidad del equipo podrían anular el derecho del usuario a hacerlo funcionar.
NOTA: EL FABRICANTE NO SE HACE RESPONSABLE DE NINGUNA INTERFERENCIA DE RADIO
O TELEVISIÓN CAUSADA POR MODIFICACIONES NO AUTORIZADAS REALIZADAS EN ESTE
EQUIPO. DICHAS MODIFICACIONES PODRÍAN ANULAR EL DERECHO DEL USUARIO A HACER
FUNCIONAR EL EQUIPO.
Advertencia de la Comisión Federal de Comunicaciones (CFC)
Este dispositivo cumple con la Sección 15 de las Normas de la Comisión Federal de
Comunicaciones (CFC). Su funcionamiento está sujeto a las dos condiciones siguientes: (1) que
no cause interferencias perjudiciales; y (2) que acepte cualquier interferencia recibida, incluyendo
interferencias que puedan causar un funcionamiento no deseado.
Declaración de cumplimiento con las disposiciones sobre exposición a la radiación de
radiofrecuencias establecidas por la Comisión Federal de Comunicaciones (CFC)
Este equipo cumple con los límites de exposición a la radiación de radiofrecuencias establecidos
por la CFC para un entorno no controlado. Este dispositivo y su antena no deberán colocarse ni
utilizarse junto con ninguna otra antena ni transmisor.
"Para cumplir con las disposiciones sobre exposición a la radiación establecidas por la CFC, esta
autorización solo será aplicable a las Configuraciones Móviles. Las antenas utilizadas para este
transmisor deberán instalarse a una distancia de por lo menos 20 cm con respecto a todas las
personas, no pudiendo situarse ni hacerse funcionar junto con otras antenas ni transmisores."
Advertencia del Departamento de Industria de Canadá
Este dispositivo cumple con las normas RSS de exención de licencia del Departamento de Industria
de Canadá. Su uso está sujeto al cumplimiento de las dos condiciones siguientes: (1) que no cause
interferencias; y (2) que acepte cualquier interferencia, incluyendo aquellas que puedan provocar
un funcionamiento no deseado de este dispositivo.
Advertencias para la visión 3D
 Si nota cualquier fatiga o malestar mientras está viendo imágenes 3D, deje de verlas.
 Los niños, particularmente los menores de 6 años, puede que sean más propensos a la sensibilidad, así
que las personas que los tengan a su cargo deberán observarlos por si muestran cualquier señal de
fatiga o malestar.
 Cuando esté viendo imágenes 3D, descanse periódicamente.
 /DYLVLyQSURORQJDGDGHLPiJHQHV'VLQQLQJ~QGHVFDQVRSRGUtDFDXVDUIDWLJDRPDOHVWDU
© 2012 PIONEER CORPORATION.
All rights reserved.
© 2012 PIONEER CORPORATION.
Tous droits de reproduction et de
traduction réservés.
Printed in China / Imprimé en Chine
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE.LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270
K002_B3_En
To register your product, find the nearest authorized service location, to
purchase replacement parts, operating instructions, or accessories,
please go to one of following URLs :
Pour enregistrer votre produit, trouver le service après-vente agréé le plus
proche et pour acheter des pièces de rechange, des modes d’emploi ou
des accessoires, reportez-vous aux URL suivantes :
In the USA/Aux Etats-Unis
http://www.pioneerelectronics.com
In Canada/Aux Canada
http://www.pioneerelectronics.ca
S018_B1_EnFr

Navigation menu