TCL Technoly Electronics MS00008 HOME AUDIO SYSTEM User Manual 010COV indb
TCL Technoly Electronics (Huizhou) Co., Ltd. HOME AUDIO SYSTEM 010COV indb
User manual_rev1
4-539-415-11(1) Home Audio System Operating Instructions Getting Started Disc Tuner USB Device BLUETOOTH Device Other Operations Additional Information MHC-ECL99BT/MHC-ECL77BT MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. Notice for the customers in the USA Owner’s Record The model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) 8) 9) The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. CAUTION The use of optical instruments with this product will increase eye hazard. 10) Except for customers in the USA and Canada 11) This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipover. 13) Un lig lo 14) Re pe th an or sp ap ex no dr The fo only t manu Othe FCC te NOTE This e found a Clas Part 15 are de protec in a re equip radiat not in with t interfe 2GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- USA rd call is 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. water. with rces This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. ding ype rd ety. into n for tlet. ng y at and he es m tip- The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Properly shielded and grounded cables and connectors must be used for connection to host computers and/ or peripherals in order to meet FCC emission limits. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). 3GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) For customers in Canada This equipment complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this equipment may not cause interference, and (2) this equipment must accept any interference, including interference that may cause undesired operation of the equipment. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other European countries with separate collection systems) This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these products and batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives. This product has been manufactured by or on behalf of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. Inquiries related to product compliance based on European Union legislation shall be addressed to the authorized representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses provided in the separate service or guarantee documents. Note A Dua which one si the ot mater Comp this p Music prote This p discs t (CD) s discs techn record amon do no may n Hom used on CD musi statio BLUE Hereby, Sony Corp., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. For details, please access the following URL: http://www.compliance.sony.de/ 4GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- ns h an ould ff the will able Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies he ry attery nt for more g of act old where ry. This product is designed to play back discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. ing Home Audio System is designed to be used for playing back music sources on CDs or USB devices, transferring music to USB devices, listening to radio stations, and listening to music on BLUETOOTH devices. d by 7-1 apan. nce mbH, art, tee es 9/5/ ing 5GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Table of Contents Guide to parts and controls ...... 7 Other Operations Using an optional audio component .............................. 26 Adjusting the sound ................ 26 Changing the display .............. 27 Using the timers ...................... 27 Getting Started Hooking up the system securely .................................... 10 Inserting batteries .................... 11 Setting the clock ....................... 11 About the power management ............................ 11 Additional Information Disc Playing a CD/MP3 disc .............12 Tuner Listening to the radio .............. 14 USB Device Before using the USB device ....15 Transferring music from a disc ........................................ 16 Playing a file .............................17 BLUETOOTH Device About the BLUETOOTH wireless technology.................20 Listening to music wirelessly on a BLUETOOTH device ..........20 Setting the BLUETOOTH audio codecs ...................................... 24 Setting the BLUETOOTH standby mode ......................... 24 Turning on or off the BLUETOOTH signal ............ 25 Using “SongPal” via BLUETOOTH ............................. 25 6GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Information about compatible devices ..................................... 29 Troubleshooting ...................... 29 Messages ................................. 34 Precautions .............................. 34 Specifications........................... 36 License and Trademark Notice ....................................... 39 Guide to parts and controls This manual mainly explains operations using the remote control, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit For North American, European, Russian and Australian models For Mideastern, African and Latin American models About the child lock function You can lock the buttons except (on/standby) on the unit to prevent them from being operated by mistake. Hold down (stop) on the unit until “LOCK ON” or “LOCK OFF” appears on the display. The buttons except on the unit will be locked or unlocked. 7GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Remote control TUNING+/TUNING– button Press to tune to the desired station. (go backward)/ (go forward) button Press to select a track or file. (rewind)/ (fast forward) button Press to find a point in a track or file. Remote control: PRESET+/PRESET– button Press to select a preset radio station. +/ – (select folder) button (page 12, 17) Press to select a folder. Unit: PRESET+/PRESET– button Press to select a preset radio station. Remote control: /// button Press to select an item. (on/standby) button Press to turn on or off the system. OPEN/CLOSE button Press to open or close the disc tray. MEGA BASS button (page 26) Press to create a more dynamic sound. Unit: VOLUME control Turn to adjust the volume. Remote control sensor (N-Mark) (page 22) Near Field Communication (NFC) touchpoint indication. REC TO USB button (page 16) Press to transfer music from a disc to the connected optional USB device. Unit: ENTER button Remote control: button Press to enter/confirm the settings. B (p fu U (p ef U Remote control: VOLUME +*/– button Press to adjust the volume. (USB) port Connect an optional USB device. AUDIO IN jack (for North American, European, Russian and Australian models) AUDIO IN L/R jacks (for Mideastern, African and Latin American models) Connect an external audio component. FU P 8GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- BLUETOOTH (page 21) Press to select the BLUETOOTH function. Hold down to activate BLUETOOTH pairing in the BLUETOOTH function. rd) or ESET– tton Unit: BLUETOOTH indicator (page 20) Remote control: CD button Press to select the CD function. Remote control: USB button Press to select the USB function. Remote control: AUDIO IN button Press to select the audio in function. Remote control: TUNER button Press to select the tuner function. tton Unit: EQ button Remote control: EQ +/EQ – button (page 26) Press to select the preset sound effect. (stop) button Press to stop playback. Press to stop transfer during music transfer. Unit: (play/pause) button Press to start or pause playback. – Remote control: (play)* button Press to start playback. ce. and Remote control: (pause) button Press to pause playback. FUNCTION button Press to select the function. REPEAT/FM MODE button Press to activate repeat playback mode (page 12, 17). Press to select the FM reception mode (monaural or stereo) (page 14). OPTIONS button Press to enter or exit the option menus. CLEAR button (page 19) Press to delete the last step from the program list. RETURN button Press to return to the previous display. TUNER MEMORY button (page 14) Press to preset the radio station. TUNER MEMORY NUMBER button (page 14) Press to tune to a preset radio station. DISPLAY button (page 27) Press to change the information on the display. SLEEP button (page 27) Press to set the Sleep Timer. TIMER MENU button (page 11, 27) Press to set the clock and the Play Timer. * The VOLUME + and buttons on the remote control have a tactile dot. Use the tactile dot as a reference when operating the system. PLAY MODE/TUNING MODE button Press to select the play mode of a CD, MP3 disc or USB device (page 12, 17). Press to select the tuning mode (page 14). 9GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Atta Getting Started Hooking up the system securely For MHC-ECL77BT For North American model (North and A Attac to the and s slippi Whe Make and n remov outlet Inse To subwoofer To left speaker To right speaker Speaker cord (Red/) Speaker cord (Black/) FM lead antenna (Extend it horizontally.) AM loop antenna (except for North American model) To wall outlet SUBWOOFER (MHC-ECL99BT only) ANTENNA Connect the subwoofer cord to the SUBWOOFER jack. Place the subwoofer vertically to obtain a better bass reproduction. Also, position the subwoofer: on a solid floor where resonance is unlikely to occur. at least a few centimeters away from the wall. away from the center of the room or place a bookshelf against a wall, to avoid generating a standing wave. When inserting the connector of antenna, make sure to insert it in the correct orientation. Find a location and orientation that provide good reception when you set up the antenna. Keep the antenna away from the speaker cords and the power cord to avoid picking up noise. Insert (supp show Notes With for a If yo long avoi corro Power Connect the power cord to a wall outlet. FRONT SPEAKERS (MHCECL99BT)/SPEAKERS (MHCECL77BT) Connect the speaker cords. 10 GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- the at u set d to (North American, European, Russian and Australian models only) Attach the supplied speaker pads to the bottom of the front speakers and subwoofer to prevent them from slipping. Setting the clock Press to turn on the system. Press TIMER MENU to select the clock set mode. If “SELECT” appears, press / repeatedly to select “CLOCK,” and then press (ENTER). When carrying this system Press / repeatedly to set the hour, then press . Use the same procedure to set the minutes. Notes Make sure that there is no disc loaded and no USB device is connected, and remove the power cord from the wall outlet. The clock settings are lost when you disconnect the power cord or if a power failure occurs. When setting the clock, select a function other than the audio in function beforehand. Inserting batteries To display the clock when the system off Insert an R6 (size AA) battery (supplied), matching the polarity shown below. Getting Started th Attaching the speaker pads Press DISPLAY. The clock is displayed for a few seconds. About the power management Notes on using the remote control With normal use, the battery should last for about six months. If you do not use the remote control for a long period of time, remove the battery to avoid damage from battery leakage and corrosion. By default, this system is set to turn off automatically in about 15 minutes when there is no operation, and no audio signal is detected (BLUETOOTH standby mode). For details, see “Setting the BLUETOOTH standby mode” (page 24). 11GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) 1) Disc 2) Playing a CD/MP3 disc Select the CD function. Press CD. Place a disc. Press OPEN/CLOSE on the unit to open the disc tray, then place a disc with the label side up in the disc tray. Press OPEN/CLOSE on the unit to close the disc tray. Start playback. Press (play). Other operations To Press Pause playback . To resume play, press . Stop playback . To resume play, press . To cancel resume play, press again. Select a folder on an MP3 disc +/ – repeatedly. Select a track or file /. Find a point in a track or file Hold down / during playback, and release the button at the desired point. 3) Crea (Pro Do not save other types of files or unnecessary folders on a disc that has MP3 files. Folders that have no MP3 files are skipped. MP3 files are played back in the order that they are recorded onto the disc. The system can only play MP3 files that have a file extension of “.mp3.” Even when file name has the correct file extension, if the actual file differs, playing this file may generate a loud noise by which the system may malfunction. The maximum number of: folders is 256 (including the root folder). MP3 files is 999. folder levels (the tree structure of files) is 8. Compatibility with all MP3 encoding/ writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all. PLAY MODE/TUNING MODE repeatedly while the player is stopped. You can select normal play (“FLDR” for all MP3 files in the folder on the disc), shuffle play (“SHUF” or “FLDRSHUF” for folder shuffle), or program play (“PROGRAM”). Se Pre rep ap sto Se nu Pre th ap Se tra nu sp rep fo file Note on playing multisession discs The system can play back continuous sessions on a disc when they are recorded in the same session format as the first session. When a session recorded in a different session format is encountered, that session and the ones following it cannot be played back. Note that even if the sessions are recorded in the same format, some sessions may not play back. Se Pre Notes on playing MP3 discs Select Repeat REPEAT/FM MODE Play repeatedly until “REP ONE1),” “REP FLDR2)” or “REP ALL3)” appears. Change the play mode “REP ONE”: Repeats the current track or file. “REP FLDR” (MP3 disc only): Repeats the current folder. “REP ALL”: Repeats all tracks or files. Pr fil Pre or Re pr fil or To tra Th yo op To pre 12GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- k or the as Creating your own program (Program Play) Press CD. To delete the last step from the program list Press CLEAR when playback is stopped. Select the desired track or file number. Press / repeatedly until the desired track or file number appears. Disc file aying Select the play mode. Press PLAY MODE/TUNING MODE. Press PLAY MODE/TUNING MODE repeatedly until “PROGRAM” appears while the player is stopped. ipped. er that hat Select the CD function. To cancel Program Play older). files) Selected track or file number nd ed. ot play When programming MP3 files in a specific folder, press +/ – repeatedly to select the desired folder, and then select the desired file. ded d, that ot be ions Total playing time of the selected track (CD-DA disc only) Program the selected track or file. Press or file. to enter the selected track Repeat steps 3 through 4 to program additional tracks or files, up to a total of 64 tracks or files. To play your program of tracks or files, press . The program is cleared when you perform one of the following operations: changing the function. turning off the system. disconnecting the power cord. opening the disc tray. To play the same program again, press . 13GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Presetting radio stations Tuner Listening to the radio Select the tuner function. Tune to the desired station. Press PRESET+/PRESET– repeatedly to select the desired preset number. For North American model Press TUNER MEMORY to select the tuner memory mode. Press TUNER (or FUNCTION on the unit repeatedly) to select the FM function. For other models Press TUNER (or FUNCTION on the unit) repeatedly to select the FM or AM function. If another station is already assigned to the selected preset number, the station is replaced by the new station. Perform tuning. For automatic scanning Press PLAY MODE/TUNING MODE repeatedly until “AUTO” appears, and then press TUNING+/TUNING–. Scanning stops automatically when a station is found. Hint Repeat steps 1 through 4 to store other stations. For North American model You can preset up to 20 FM stations. For manual tuning To reduce static noise on a weak FM stereo station, press REPEAT/FM MODE repeatedly until “MONO” appears to turn off stereo reception. You will lose stereo effect, but reception will improve. to store the station. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. If the scanning does not stop, press to stop scanning, then perform manual tuning (below). Press PLAY MODE/TUNING MODE repeatedly until “MANUAL” appears, and then press TUNING+/TUNING– repeatedly to tune to the desired station. When you tune to a station that provides RDS services, the station name appears on the display (European model only). Press For other models You can preset up to 20 FM and 10 AM stations. To tune to a preset radio station If you registered a radio station to a preset number 1 to 4, the radio station will be tuned in by just pressing the TUNER MEMORY NUMBER (1 to 4) when the tuner function is selected. If you registered a radio station to a preset number 5 or higher, press PLAY MODE/TUNING MODE repeatedly until “PRESET” appears then press PRESET+/PRESET– repeatedly to select the desired preset number. 14GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) USB Device Before using the USB device For compatible USB devices, see “Information about compatible devices” (page 29). (You can use your Apple devices with this system via BLUETOOTH connection only.) To use the system as a battery charger You can use the system as a battery charger for USB devices that have a rechargeable function. Connect the USB device to the (USB) port. The charging begins when the USB device is connected to the (USB) port. For details, see the user’s guide of your USB device. Notes USB Device When USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. See the operation manual supplied with the USB device to be connected for details on the operation method. It may take a long time before “SEARCH” appears depending on the type of USB device connected. Do not connect the system and the USB device through a USB hub. When the USB device is inserted, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. Compatibility with all encoding/writing software cannot be guaranteed. If audio files on the USB device were originally encoded with incompatible software, those files may produce noise or interrupted audio, or may not play at all. This system does not necessarily support all the functions provided in a connected USB device. Do not remove the USB device during transferring or erase operations. Doing so may corrupt the data on the device or damage the device itself. 15GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Transferring music from a disc Select the CD function. Note Transferring starts, then “USB REC” appears on the display. Do not remove the USB device until transferring is completed. When transferring is completed, “COMPLETE” appears on the display and audio files in MP3 format will be created. You can transfer music from a disc (CD-DA disc or MP3 disc) by using the following transfer modes of this system. CD SYNC transfer: Transfer all the CDDA tracks from the CD-DA disc. MP3 folder transfer: Transfer MP3 files in a specific folder from the MP3 disc. REC1 transfer: Transfer a currently playing track or MP3 file from the disc. Press To stop transfer Press . Folder and file generation rules Load a disc you want to transfer. When first transferring to a USB device, a folder (“CDDA001*,” “MP3_REC1” or “CD_REC1”) is created directly below the “ROOT” (in case of MP3 folder transfer, a folder that has the same name as the transferring source is created below the “ROOT”). Folders and files are generated as follows. Prepare for transferring. CD SYNC transfer Press CD. Connect the USB device to the (USB) port. Proceed to step 5 in case of CD SYNC transfer. Transferring Folder source name CD-DA “CDDA001”* For MP3 folder transfer To transfer MP3 files in a specific folder, press +/ – repeatedly to select the folder you want. Then start playback and press once. Make sure the elapsed playing time has stopped on the display. Press REC TO USB on the unit. “READY” appears on the display. Note The tra use on limit re holder File name “TRACK001”* MP3 folder transfer Transferring Folder File name source name MP3 Same as the transferring source For REC1 transfer Press / to select the track or MP3 file you want to transfer, then start playback. To transfer an MP3 file in a specific folder, press +/ – repeatedly to select the folder you want, then press / to select the MP3 file you want to transfer. Then start playback. If yo repe is au CD-T the c not s Tran th tra th on fo re If a f to tra devi num over Do n or un trans REC1 transfer Transferring Folder source name “MP3_REC1” MP3 CD-DA “CD_REC1” File name Same as the transferring source “TRACK001”* * Folder and file numbers are assigned serially thereafter. 16GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- Notes REC” until d, splay will es Note on copyright-protected content The transferred music is limited to private use only. Use of the music beyond this limit requires permission of the copyright holders. Playing a file The audio formats that can be played back on this system are MP3/WMA*. * Files with DRM (Digital Rights Management) copyright protection cannot be played back on this system. Files downloaded from an online music store may not be played back on this system. Select the USB function. Press USB. Connect the USB device to the (USB) port. Start playback. Press . Other operations To Press Pause playback . To resume play, press . Stop playback . To resume play, press 1). To cancel resume play, press again. me 001”* me me s the ring Select a folder +/ USB Device ed e of has T”). If you start transferring in shuffle play or repeat play mode, the selected play mode is automatically changed to normal play. CD-TEXT information is not transferred in the created MP3 files. This system does not support the CD-TEXT standard. Transferring stops automatically if: the USB device runs out of space during transferring. the number of audio files and folders on the USB device reaches the limit for the number that the system can recognize. If a folder or file that you are trying to transfer already exists on the USB device with the same name, a sequential number is added after the name without overwriting the original folder or file. Do not use buttons on the remote control or unit during transferring to prevent transferring from stopping. – repeatedly. Select a file /. Find a point in a file Hold down / during playback, and release the button at the desired point. Select Repeat REPEAT/FM MODE Play repeatedly until “REP ONE2),” “REP FLDR3)” or “REP ALL4)” appears. Change the play mode 001”* PLAY MODE/TUNING MODE repeatedly while the USB device is stopped. You can select normal play (“FLDR” for all files in the folder on the USB device), shuffle play (“SHUF” or “FLDRSHUF” for folder shuffle), or program play (“PROGRAM”). 17GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) 1) 2) 3) 4) When playing a VBR MP3/WMA file, the system may resume playback from a different point. “REP ONE”: Repeats the current file. “REP FLDR”: Repeats the current folder. “REP ALL”: Repeats all files on a USB device. To erase audio files or folders from the USB device 1 Select the USB function. Press USB. 2 Connect the USB device to the (USB) port. Notes This system cannot play audio files on the USB device in the following cases; when the number of audio files in a folder exceeds 999. when the total number of audio files on a USB device exceeds 999. when the number of folders on a USB device exceeds 256 (including the “ROOT” folder and empty folders). These numbers may vary depending on the file and folder structure. Do not save other types of files or unnecessary folders on a USB device that has audio files. The system can play back to a depth of 8 folders only. Files and folders are displayed in the order of their creation on the USB device. Folders that have no audio files are skipped. The audio formats that you can listen to with this system are as follows: MP3: file extension “.mp3” WMA: file extension “.wma” Note that even when file name has the correct file extension, if the actual file differs, the system may produce noise or may malfunction. Crea (Pro Pre +/ – repeatedly to select the audio file or folder you want to erase, then start playback. Se Pre de 5 Press / repeatedly to select “ERASE,” then press Se Pre rep ap sto 3 Press / or 4 Press OPTIONS. Se 6 Press / to select “FOLDER” or “FILE,” then press . “ERASE??” flashes on the display. 7 Press “COMPLETE” appears on the display. file de de Pr Pre Re pr to To pr Th yo op To pre To ca Press To de progr Press stopp 18GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- om Creating your own program (Program Play) Select the USB function. Press USB. Select the play mode. Press PLAY MODE/TUNING MODE repeatedly until “PROGRAM” appears while the player is stopped. file hen Select the desired file number. Press / repeatedly until the desired file number appears. or Selected file number When programming MP3/WMA files in a specific folder, press +/ – repeatedly to select the desired folder, and then select the desired file. USB Device ay. Program the selected file. Press to enter the selected file. Repeat steps 3 through 4 to program additional files, up to a total of 64 files. To play your program of files, press . The program is cleared when you perform one of the following operations: changing the function. turning off the system. disconnecting the power cord. To play the same program again, press . To cancel Program Play Press PLAY MODE/TUNING MODE. To delete the last step from the program list Press CLEAR when playback is stopped. 19GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) BLUETOOTH Device About the BLUETOOTH wireless technology BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices. BLUETOOTH wireless technology operates within a range of about 10 meters (33 feet). Supported BLUETOOTH version, profiles and codecs Supported BLUETOOTH version: BLUETOOTH Standard version 3.0 Listening to music wirelessly on a BLUETOOTH device You can listen to music from your BLUETOOTH device over a wireless connection. About the BLUETOOTH indicator The BLUETOOTH indicator lights up or flashes in blue to show the BLUETOOTH status. System status Indicator status Supported BLUETOOTH profiles: A2DP (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) SPP (Serial Port Profile) BLUETOOTH standby Flashes slowly BLUETOOTH pairing Flashes quickly BLUETOOTH connecting Flashes Supported BLUETOOTH codecs: SBC (Sub Band Codec) AAC (Advanced Audio Coding) (except for North American model) BLUETOOTH connection is established Lights up Pair BLU Pairin BLUET each pairin does If you smart proce Pl th Pr th If t se no sy au If t est co BL Ho 5s “PA Pe on Fo ins de Se th BL Fo “S “S If p BL 20GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- s or Pairing this system with a BLUETOOTH device When pairing is completed and the BLUETOOTH connection is established, “BT AUDIO” appears on the display. Depending on the BLUETOOTH device, connection may start automatically after pairing is completed. Pairing is an operation where BLUETOOTH devices register with each other beforehand. Once a pairing operation is performed, it does not need to be performed again. If your device is an NFC-compatible smartphone, the manual pairing procedure is not necessary. Place the BLUETOOTH device within 1 meter (3 feet) from the system. Press BLUETOOTH to select the BLUETOOTH function. Note If the BLUETOOTH connection is established, terminate the BLUETOOTH connection. See “To terminate the BLUETOOTH connection” (page 23). Notes You can pair up to 8 BLUETOOTH devices. If the 9th BLUETOOTH device is paired, the oldest paired device will be deleted. “Passkey” may be called “Passcode,” “PIN code,” “PIN number” or “Password,” etc., depending on the device. The pairing standby status of the system is canceled after about 5 minutes. If pairing is not successful, repeat from step 1. If you want to pair with another BLUETOOTH device, repeat steps 1 to 6. To cancel the pairing operation Press BLUETOOTH. Hold down BLUETOOTH for 5 seconds or more. BLUETOOTH Device If the BLUETOOTH function is selected when the system has no pairing information, the system enters the pairing mode automatically. Perform the BLUETOOTH connection on the BLUETOOTH device. “PAIRING” flashes on the display. Perform the pairing procedure on the BLUETOOTH device. For details, refer to the operating instructions of your BLUETOOTH device. Select the model number of the unit on the display of the BLUETOOTH device. For example, select “SONY:MHC-ECL99BT” or “SONY:MHC-ECL77BT.” If passkey is required on the BLUETOOTH device, enter “0000”. 21GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Connecting a smartphone with one touch (NFC) When you touch the system with an NFC-compatible smartphone, the system automatically: turns on in the BLUETOOTH function. completes pairing. completes the BLUETOOTH connection. Start the “NFC Easy Connect” app on the smartphone. Make sure that the application screen is displayed. Touch the smartphone to the N-Mark on the system until the smartphone vibrates. To pla incom NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the designated touchpoint on the NFCcompatible devices. Complete the connection by following the instructions displayed on the smartphone. When the BLUETOOTH connection is established, the BLUETOOTH indicator stops flashing and remains light up. “BT AUDIO” appears on the display. You can switch the sound source from the smartphone to another NFC-compatible BLUETOOTH device. For details, refer to the operating instructions of your BLUETOOTH device. Download and install the “NFC Easy Connect” app. Download the free Android™ app from Google Play™ by searching for “NFC Easy Connect” or access it by using the two-dimensional code below. Data communication fees may be charged. Two-dimensional code* for direct access * Use a two-dimensional code reader app. You c by co BLUET Check music The BLU Pair What is “NFC”? Liste BLU Hint If pairing and the BLUETOOTH connection fail, do the following. Relaunch “NFC Easy Connect” and move the smartphone slowly over the N-Mark. Remove the case from the smartphone if using a commercially available smartphone case. Notes The App may not be available in some countries and/or regions. Depending on your smartphone, you can use the NFC function without installing the app. In this case, the operations and specifications may differ. For details, refer to the operating instructions of your smartphone. Pr th “B Es BL Th de au Pe co de co Pr De de Note Whe any will c BLUE you If yo devi conn disco Compatible smartphones Smartphones with a built-in NFC function (OS: Android 2.3.3 or later, excluding Android 3.x) 22GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- ect” the til layed Listening to music on a BLUETOOTH device You can operate a BLUETOOTH device by connecting the system and the BLUETOOTH device using AVRCP. Check the following before playing music: The BLUETOOTH function of the BLUETOOTH device is turned on. Pairing has been completed. To terminate the BLUETOOTH connection For NFC-incompatible BLUETOOTH devices 1 Press OPTIONS. Press BLUETOOTH to select the BLUETOOTH function. 2 Press / repeatedly to select “DISCONCT,” then press “BT AUDIO” appears on the display. Establish connection with the BLUETOOTH device. The last connected BLUETOOTH device will be connected automatically. Perform the BLUETOOTH connection from the BLUETOOTH device if the device is not connected. ng For NFC-compatible smartphones Touch the smartphone to the N-Mark on the system again. Erasing all the pairing registration information Press . Depending on the BLUETOOTH device, you may need to press twice. you may need to start playback of an audio source on the BLUETOOTH device. Notes Depending on the BLUETOOTH device, the BLUETOOTH connection may be terminated automatically when you stop playback. BLUETOOTH Device ce er move Mark. one Touch the smartphone to the N-Mark on the system to establish the BLUETOOTH connection. Start playback of an audio source on the smartphone. For details on playback, refer to the operating instructions of your smartphone. To play music on an NFCincompatible BLUETOOTH device tion ion To play music on an NFC-compatible smartphone To erase all the pairing registration information, the system should be reset to the factory settings. See “To reset the system to factory settings” (page 33). When the system is not connected to any BLUETOOTH device, the system will connect from the last connected BLUETOOTH device automatically when you press . If you try to connect another BLUETOOTH device to the system, the current connected BLUETOOTH device will be disconnected. 23GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Setting the BLUETOOTH audio codecs Setting the BLUETOOTH standby mode Turn BLU The BLUETOOTH standby mode enables the system to turn off automatically in about 15 minutes when there is no operation, no audio signal is detected, and the automatic standby function (page 33) is turned on. By default, this mode is enabled. You c from in all BLUET BLUET defau (except for North American model) You can select the BLUETOOTH audio codecs when the connected BLUETOOTH device supports Advanced Audio Coding (AAC). Press OPTIONS. Press / repeatedly to select “ON” or “OFF,” then press . Press / repeatedly to select “BT AAC,” then press . ON: Select this setting if the BLUETOOTH device supports Advanced Audio Coding (AAC). OFF: Select this setting if the BLUETOOTH device only supports Sub Band Codec (SBC). Press OPTIONS. Press / repeatedly to select “ON” or “OFF,” then press . When the BLUETOOTH standby mode is set to on, the system waits for a BLUETOOTH connection even when the system has been turned off. When a BLUETOOTH connection is established, the system turns on automatically. Notes You can enjoy high quality sound if the AAC is selected. In case you cannot listen to AAC sound from your device, select “OFF.” If you change this setting while the system is connected to a BLUETOOTH device, the BLUETOOTH device will be disconnected. To connect to the BLUETOOTH device, perform the BLUETOOTH connection again. Press / repeatedly to select “BT:STBY,” then press . Hint Disable the BLUETOOTH standby mode to reduce the power consumption in standby mode (eco mode). Use th this o Hold abou “BT O displa Note You oper to of Pa Se Se Us Whe off, t conn BLUE 24GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- H dio atic elect elect e to ndby Using “SongPal” via BLUETOOTH (except for North American model) You can connect to the system from a paired BLUETOOTH device in all functions when the system’s BLUETOOTH signal is set to on. The BLUETOOTH signal is turned on by default. Use the buttons on the unit to perform this operation. About App A dedicated app for this model is available on both Google Play and App Store. Search for “SongPal” and download the free app to find out more about the convenient features. Hold down EQ and ENTER for about 5 seconds. “BT ON” or “BT OFF” appears on the display. Notes You cannot perform the following operations when BLUETOOTH signal is set to off: Pairing with BLUETOOTH device Setting the BLUETOOTH audio codecs Setting the BLUETOOTH standby mode Using “SongPal” via BLUETOOTH When the BLUETOOTH signal is set to off, this system cannot be detected and connection cannot be established from BLUETOOTH device. BLUETOOTH Device waits even ned ection s on Turning on or off the BLUETOOTH signal 25GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Other Operations Using an optional audio component Prepare the sound source. Connect an optional audio component to the AUDIO IN jack(s) on the unit using an audio analog cord (not supplied). Press VOLUME – repeatedly until “VOL MIN” appears on the display. Adjusting the sound Cha To Press To Adjust the volume VOLUME +/–. Generate a more dynamic sound MEGA BASS. Chang inform on th displa Set the sound EQ +/EQ – repeatedly effect until desired sound effect is displayed. Select the audio in function. Press AUDIO IN. * For e such albu The s displa Displ mode Powe mode Start playback. Start playback of the connected component and adjust the volume. Note The system may enter standby mode automatically if the volume level of the connected component is too low. Adjust the component’s volume accordingly. See “To turn off the automatic standby function” (page 33). Notes Char appe The to US re The el fil ra fo ei th 26GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- dly Changing the display Using the timers To Press Change information on the display* DISPLAY repeatedly when the system is on. The system offers two timer functions. If you use both timers, the Sleep Timer has priority. * For example, you can view information, such as track number, file/folder name, album name and artist name. The system offers the following display mode. Display mode When the system is off Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. Press SLEEP repeatedly. If you select “AUTO,” the system automatically turns off after the current disc or USB device stops, or within 100 minutes. Play Timer: Power Saving The display is turned mode off to conserve power. The clock continues to operate. You can wake up to a CD, FM reception, AM reception (except for North American model) or USB device at a preset time. Make sure you have set the clock. Notes on the display information Prepare the sound source, and then press VOLUME +/– to adjust the volume. Select the timer set mode. Press TIMER MENU. If the clock is not set, the system will be in clock set mode. In that case, set the clock. Set the play timer. Other Operations Characters that cannot be displayed appear as “_”. The following are not displayed; total playing time for an MP3 disc and a USB device. remaining playing time for an MP3/ WMA file. The following are not displayed correctly; elapsed playing time of an MP3/WMA file encoded using VBR (variable bit rate). folder and file names that do not follow either the ISO9660 Level 1/Level 2 in the expansion format. Prepare the sound source. Press / repeatedly to select “PLAY SET,” then press . Set the time to start playback. Follow the same procedure as in step 4 to set the time to stop playback. Select the sound source. Press / repeatedly to set the hour, then press . Follow the same procedure to set the minutes. Press / repeatedly until the desired sound source appears, then press . 27GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) 7 Turn off the system. Press . The system automatically turns on before the preset time. If the system is on at the preset time, the Play Timer will not be activated. Do not operate the system from the time the system turns on until the playback starts. To check the setting 1 Press TIMER MENU. 2 Press / repeatedly to select “SELECT,” and then press 3 Press / repeatedly to select “PLAY SEL,” and then press To cancel the timer Repeat the same procedure as in “To check the setting” until “OFF” appears in step 3, and then press . To change the setting Start over from step 1 of “Using the timers.” Hint The Play Timer setting remains as long as the setting is not canceled manually. 28GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Additional Information Information about compatible devices About supported USB devices This system supports USB Mass Storage Class only. This system supports FAT formatted USB devices only (except exFAT). Some USB devices may not work with this system. Troubleshooting Make sure the power cord and speaker cords are correctly and firmly connected. Find your problem in the checklist below, and take the indicated corrective action. About BLUETOOTH communication for iPhone and iPod touch Made for iPhone 5s iPhone 5c iPhone 5 iPhone 4s iPhone 4 iPod touch (5th generation) iPod touch (4th generation) If the issue persists, contact your nearest Sony dealer. If “PROTECT” appears on the display If “OVER CURRENT” appears on the display A problem has been detected with the level of electrical current from the (USB) port. Turn off the system and remove the USB device from the (USB) port. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. Additional Information Immediately unplug the power cord, and check the following items after “PROTECT” disappears. Are you using only the supplied speakers? Is anything blocking the ventilation holes of the system? After you have checked these above items and found no problems, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. 29GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) General The system does not turn on. Is the power cord plugged in? The system has entered standby mode unexpectedly. This is not a malfunction. The system enters standby mode automatically in about 15 minutes when there is no operation or audio signal output. See “Setting the BLUETOOTH standby mode” (page 24) and “To turn off the automatic standby function” (page 33). The clock setting or the Play Timer operation has been canceled unexpectedly. If about a minute elapses with no operation, the clock setting or Play Timer setting is canceled automatically. Perform the operation again from the beginning. There is no sound. Check the speaker connections. Are you using only the supplied speakers? Is anything blocking the ventilation holes of the system? The specified station may have temporarily stopped broadcast. Sound comes from one channel, or the left and right volumes are unbalanced. Place the speakers as symmetrically as possible. Connect only the supplied speakers. There is severe hum or noise. Move the system away from sources of noise. Connect the system to a different wall outlet. Install a noise filter (available separately) to the power cord. The remote control does not function. Remove any obstacles between the remote control and the remote control sensor on the unit, and position the unit away from fluorescent lights. Point the remote control at the system’s sensor. Move the remote control closer to the system. Except , no buttons on the unit work, and “LOCK ON” appears on the display. The child lock function has been enabled. To disable the child lock, hold down on the unit until “LOCK OFF” appears on the display. A disc cannot be ejected and “LOCKED” appears on the display. Contact your Sony dealer or local authorized Sony service facility. CD/MP3 disc The sound skips, or the disc will not play. Wipe the disc clean, and replace it. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. Playback does not start from the first track. Set the play mode to normal play mode. Starting playback takes more time than usual. The following discs can increase the time it takes to start playback; a disc recorded with a complicated tree structure. a disc recorded in multisession mode. a disc that has not been finalized (a disc to which data can be added). a disc that has many folders. USB d The c charg Mak con The U prope If yo USB may com Th Fi P Th Th A There The corr reco There soun Turn the The or t hav crea or t dat The the with dev “SEAR exten befor The tim Th th Th co Th Th fr 30GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- ction. ote to nit n the ck, play. y. al not he ate to first ay me e the cated zed The connected USB device cannot be charged. Make sure the USB device is connected securely. The USB device does not work properly. If you connect an unsupported USB device, the following problems may occur. See “Information about compatible devices” (page 29). The USB device is not recognized. File or folder names are not displayed on this system. Playback is not possible. The sound skips. There is noise. A distorted sound is output. There is no sound. The USB device is not connected correctly. Turn off the system, then reconnect the USB device. There is noise, skipping, or distorted sound. Turn off the system, then reconnect the USB device. The music data itself contains noise, or the sound is distorted. Noise may have been entered during music creation process using this system or the computer. Create the music data again. The bit rate used when encoding the files was low. Send files encoded with higher bit rates to the USB device. “SEARCH” is displayed for an extended time, or it takes a long time before playback starts. The reading process can take a long time in the following cases. There are many folders or files on the USB device. The file structure is extremely complex. The memory capacity is excessive. The internal memory is fragmented. Erroneous display Characters that cannot be displayed appear as “_“. The USB device is not recognized. Turn off the system and reconnect the USB device, then turn on the system. See “Information about compatible devices” (page 29). Transferring results in an error. See “Information about compatible devices” (page 29). The USB device is not formatted correctly. Refer to the operating instructions of the USB device on how to format. Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again. The USB device was disconnected or the power was turned off during transferring. Delete the partially transferred file, and perform transferring again. If this does not fix the problem, the USB device may be broken. Refer to the operating instructions of the USB device on how to deal with this problem. Audio files or folders on the USB device cannot be erased. Check if the USB device is writeprotected. The USB device was disconnected or the power was turned off during the erase operation. Delete the partially-erased file. If this does not fix the problem, the USB device may be broken. Refer to operating instructions of the USB device on how to deal with this problem. Additional Information e it. away top USB device 31GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Playback does not start. Turn off the system and reconnect the USB device, then turn on the system. See “Information about compatible devices” (page 29). Press to start playback. Playback does not start from the first track. Set the play mode to normal play mode. Files cannot be played back. The audio files may have inappropriate file extensions. The file extensions supported by this system are as follows: MP3: file extension “.mp3” WMA: file extension “.wma” USB storage devices formatted with file systems other than FAT16 or FAT32 are unsupported.* If you use a partitioned USB storage device, only files on the first partition can be played back. Files that are encrypted or protected by passwords, etc. cannot be played back. * This system supports FAT16 and FAT32, but some USB storage devices may not support all of these FAT. For details, see the operation manual of each USB storage device or contact the manufacturer. Tuner There is severe hum or noise, or stations cannot be received. Connect the antenna properly. Try another place and orientation for better antenna reception. Keep the antenna away from the speaker cords and the power cord to avoid picking up noise. Turn off nearby electrical equipment. BLUETOOTH device Pairing cannot be performed. Move the BLUETOOTH device closer to the system. Pairing may not be possible if other BLUETOOTH devices are present around the system. In this case, turn off the other BLUETOOTH devices. Make sure to enter the correct passkey when selecting the model number (this system) on the BLUETOOTH device. Connection is not possible. The BLUETOOTH device you attempted to connect does not support the A2DP profile, and cannot be connected with the system. Enable the BLUETOOTH function of the BLUETOOTH device. Establish a connection from the BLUETOOTH device. The pairing registration information has been erased. Perform the pairing operation again. Erase the pairing registration information of the BLUETOOTH device by resetting the system to factory settings (page 33) and perform the pairing operation again (page 21). The sound skips or fluctuates, or the connection is lost. The system and the BLUETOOTH device are too far apart. If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. There disto If th syst rem If th elec aw dev mov Turn con To ch (exce Europ The A 9 kHz Use b AM tu 1 Tu 2 Ho un ap All era To res settin If the prope settin 1 Di po sy 2 Ho un All as reg an de The sound of your BLUETOOTH device cannot be heard on this system. Increase the volume on your BLUETOOTH device first, then adjust the volume using VOLUME +/–. 32GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- oser ther turn es. del There is severe hum, noise or distorted sound. If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. Turn down the volume of the connected BLUETOOTH device. To change the AM tuning interval (except for North American, European and Russian models) The AM tuning interval is preset to 9 kHz or 10 kHz by factory default. n of Use buttons on the unit to change the AM tuning interval. 1 Tune to any AM station. tion gain the he evice, rates as TH arby, until “530” (10 kHz) or “531” (9 kHz) appears on the display. All the AM preset stations are erased. This system is equipped with an automatic standby function. With this function, the system enters standby mode automatically in about 15 minutes when there is no operation and no audio signal is detected. By default, the automatic standby function is turned on. Hold down while the system is on, until “AUTO STANDBY OFF” appears. To turn on the function, repeat the procedure until “AUTO STANDBY ON” appears. Notes The automatic standby function is invalid for the tuner function. The system may not enter standby mode automatically in the following cases: when an audio signal is detected. during playback of audio tracks or files. while the preset Play Timer or Sleep Timer is in process. To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. 1 Disconnect and reconnect the power cord, and then turn on the system. Additional Information to 2 Hold down MEGA BASS on the unit To turn off the automatic standby function 2 Hold down and EQ on the unit until “RESET” appears. All user-configured settings, such as preset radio stations, the pairing registration information, timer, and the clock are reset to factory default settings. evice djust 33GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) Messages Precautions DISC ERR Discs that this system CAN play You have loaded a disc that cannot be played. Audio CD CD-R/CD-RW (audio data/MP3 files) ERROR Discs that this system CANNOT play You cannot transfer music to the USB device because the USB device is write-protected or the memory of the USB device is full. CD-ROM CD-R/CD-RW other than those recorded in music CD format, conforming to ISO9660 Level 1/Level 2 CD-R/CD-RW recorded in multisession that have not ended by “closing the session” CD-R/CD-RW of poor recording quality, CD-R/CD-RW that have scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Discs containing files other than MPEG 1 Audio Layer-3 (MP3) files Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched FULL You tried to program more than 64 tracks or files (steps). NO FILE There are no playable files on the CD-R/CD-RW discs or on the USB device. NO STEP All of the programmed steps have been erased. NO USB No USB device is connected or an unsupported USB device is connected. PLAY SET You tried to select the timer when the Play Timer is not set. PLS STOP You pressed PLAY MODE/TUNING MODE during playback. SELECT You pressed TIMER MENU during timer operation. TIME NG The Play Timer start and end times are set to the same time. Notes on discs Before playing, wipe the disc with a cleaning cloth from the center outward to the edge. Do not clean discs with solvents, such as benzine, thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave them in a car parked in direct sunlight. On pl Do n posit hot, adeq vibra Be c spea spec oil, p the s If the cold very on th caus situa syste the m On he Heat is no Do n used beca hot. Do n On th This sp shield sets m In this 30 min If the speak Clean Clean moiste Do no scouri benzin On safety Completely disconnect the power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. The AC power cord can be changed only by a qualified service facility. 34GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- ay ded in 9660 on ty, are an rectly EG 1 mple, r, or ard to h as ailable d for ht ect rd ains) if nded e unit, cord into have fore only On BLUETOOTH Communication BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions. When a person, metal object, wall or other obstruction is between the devices with a BLUETOOTH connection Locations where a wireless LAN is installed Around microwave ovens that are in use Locations where other electromagnetic waves occur BLUETOOTH devices and wireless LAN (IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your BLUETOOTH device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies: Try connecting this system and BLUETOOTH device when you are at least 10 meters (33 feet) away from the wireless LAN equipment. Turn off the power to the wireless LAN equipment when using your BLUETOOTH device within 10 meters (33 feet). The radio waves broadcast by this system may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this system and BLUETOOTH device in the following locations: In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gases may be present Near automatic doors or fire alarms This system supports security functions that comply with the BLUETOOTH specification as a means of ensuring security during communication using BLUETOOTH technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using BLUETOOTH technology. Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using BLUETOOTH technology. BLUETOOTH communication is not necessarily guaranteed with all BLUETOOTH devices that have the same profile as this system. On heat buildup Heat buildup on the unit during operation is normal and is not cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Do not obstruct the ventilation holes. On the speaker system This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. Additional Information eals seal nk On placement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. 35GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) BLUETOOTH devices connected with this system must comply with the BLUETOOTH specification prescribed by the Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the BLUETOOTH specification, there may be cases where the characteristics or specifications of the BLUETOOTH device make it impossible to connect, or may result in different control methods, display or operation. Noise may occur or the audio may cut off depending on the BLUETOOTH device connected with this system, the communications environment, or surrounding conditions. Specifications Main unit AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (The United States model only) With 3 ohms loads, both channels driven, from 120 10,000 Hz; rated 30 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milliwatts to rated output. Amplifier section MHC-ECL99BT U.S. model: Front speaker: Output power (reference): 235 W + 235 W (per channel at 3 ohms, 1 kHz) Subwoofer: Output power (reference): 230 W (at 3 ohms, 100 Hz) Other models: Front speaker: Power output (rated): 60 W + 60 W (at 3 ohms, 1 kHz, 1% THD) Output power (reference): 235 W + 235 W (per channel at 3 ohms, 1 kHz) Subwoofer: Output power (reference): 230 W (at 3 ohms, 100 Hz) Input Midea mode Other Outpu CD pla System system Laser MHC-ECL77BT U.S. model: Output power (reference): 235 W + 235 W (per channel at 3 ohms, 1 kHz) Brazilian model: Output power (reference): 160 W + 160 W (per channel at 3 ohms, 1 kHz) Other models: Power output (rated): 60 W + 60 W (at 3 ohms, 1 kHz, 1% THD) Output power (reference): 235 W + 235 W (per channel at 3 ohms, 1 kHz) 36GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- ONIC nels ated from Tuner section Mideastern, African and Latin American models: AUDIO IN L/R: Sensitivity 800 mV, impedance 10 kilohms Other models: AUDIO IN (stereo mini jack): Sensitivity 800 mV, impedance 10 kilohms FM stereo North American model: FM superheterodyne tuner Other models: FM/AM superheterodyne tuner Antenna: FM lead antenna AM loop antenna (except for North American model) FM tuner section: Tuning range: North American and Brazilian models: 87.5 MHz – 108.0 MHz (100 kHz step) Other models: 87.5 MHz – 108.0 MHz (50 kHz step) AM tuner section (except for North American model): Tuning range: European and Russian models: 531 kHz – 1,602 kHz (9 kHz step) African and Mideastern models: 531 kHz – 1,602 kHz (9 kHz step) 530 kHz – 1,610 kHz (10 kHz step) Other models: 531 kHz – 1,710 kHz (9 kHz step) 530 kHz – 1,710 kHz (10 kHz step) Outputs FRONT SPEAKERS (MHC-ECL99BT)/ SPEAKERS (MHC-ECL77BT): Accepts impedance of 3 ohms SUBWOOFER (MHC-ECL99BT only): Accepts impedance of 3 ohms CD player section System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44.6μW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. 1% USB section (USB) port: Type A, maximum current 1.5 A Additional Information Input 1% 37GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) BLUETOOTH section Communication system: BLUETOOTH Standard version 3.0 Output: BLUETOOTH Standard Power Class 2 Maximum communication range: Line of sight approx. 10 m (33 feet)1) Frequency band: 2.4 GHz band (2.4000 GHz – 2.4835 GHz) Modulation method: FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles2): A2DP (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) SPP (Serial Port Profile) Supported codecs: SBC (Sub Band Codec) AAC (Advanced Audio Coding)3) 1) 2) 3) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc. BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. Except for North American model Supported audio formats Supported bit rate: MP3 (MPEG 1 Audio Layer-3): 32 kbps 320 kbps, VBR WMA*: 32 kbps 192 kbps, VBR Sampling frequencies: MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz WMA*: 44.1 kHz * USB devices only Speaker Front speaker North American, European, Russian and Australian models: SS-EC719iP Other models: SS-ECL77BT Speaker system: 2-way speaker system, Bass reflex Speaker units: Woofer: 160 mm (6 1/2 in), cone type Tweeter: 40 mm (1 1/2 in), horn type Rated impedance: 3 ohms Dimensions (W/H/D): North American, European, Russian and Australian models: Approx. 230 mm × 300 mm × 205 mm (9 in × 11 3/4 in × 8 1/8 in) Other models: Approx. 230 mm × 304 mm × 205 mm (9 in × 12 in × 8 1/8 in) Mass: Approx. 2.5 kg (5 lb 8 1/8 oz) net per speaker Quantity: 2 pieces Subwoofer for MHC-ECL99BT only North American, European, Russian and Australian models: SS-WG919iP Other models: SS-WEC99BT Speaker system: Subwoofer system, Bass reflex Speaker unit: 200 mm (8 in), cone type Rated impedance: 3 ohms Dimensions (W/H/D): North American, European, Russian and Australian models: Approx. 280 mm × 300 mm × 290 mm (11 in × 11 3/4 in × 11 3/8 in) Other models: Approx. 280 mm × 304 mm × 290 mm (11 in × 12 in × 11 3/8 in) Mass: Approx. 5.0 kg (11 lb 3/8 oz) net per speaker Quantity: 1 piece Gene Powe Powe Stand Powe Dimen protru × × Mass Quant Suppl Desig chang 38GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) MHC- General and em, e type type ssian 9 in × m× × et , Bass ype ssian 11 in m× × et per Supplied accessories: Remote control (1) R6 (size AA) battery (1) FM lead antenna (1) AM loop antenna (1) (except for North American model) Speaker pads MHC-ECL99BT (12)/ MHC-ECL77BT (8) (North American, European, Russian and Australian models only) Design and specifications are subject to change without notice. License and Trademark Notice MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Android™ is a trademark of Google Inc. Google Play™ is a trademark of Google Inc. iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. All other trademarks and registered trademarks are of their respective holders. In this manual, TM and ® marks are not specified. Additional Information and Power requirements: North American model: AC 120 V, 60 Hz Mexican and Brazilian models: AC 120 V – 240 V, 60 Hz Other models: AC 120 V 240 V, 50/60 Hz Power consumption: MHC-ECL99BT: 90 W MHC-ECL77BT: 75 W Standby power consumption (at the Power Saving mode): When BLUETOOTH standby mode is set to off: 0.5 W (eco mode) When BLUETOOTH standby mode is set to on: 4 W (all wireless network ports on) Dimensions (W/H/D, including largest protrusions) (excl. speakers): MHC-ECL99BT: Approx. 193 mm × 300 mm × 260 mm (7 5/8 in × 11 3/4 in × 10 1/4 in) MHC-ECL77BT: Approx. 193 mm × 300 mm × 260 mm (7 5/8 in × 11 3/4 in × 10 1/4 in) Mass (excl. speakers): MHC-ECL99BT: Approx. 3.1 kg (6 lb 13 3/8 oz) MHC-ECL77BT: Approx. 3.1 kg (6 lb 13 3/8 oz) Quantity of the main unit: 1 piece 39GB MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1) ©2014 Sony Corporation Printed in China MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : 3.1-701 Trapped : False Producer : Acrobat Distiller 10.1.5 (Windows) Creator Tool : Adobe InDesign CS5.5 (7.5.3) Modify Date : 2014:05:20 08:51:22+08:00 Create Date : 2014:05:14 11:02:34+09:00 Metadata Date : 2014:05:20 08:51:22+08:00 Format : application/pdf Title : 010COV.indb Creator : idea_2f GTS PDFX Conformance : PDF/X-1a:2001 GTS PDFX Version : PDF/X-1:2001 Version ID : 1 Document ID : uuid:900ba2af-f39c-4188-aaad-743158217d95 Instance ID : uuid:9f96fd8c-2d2c-48b2-8bf1-33c4424f0b66 Has XFA : No Page Count : 40 Author : idea_2fEXIF Metadata provided by EXIF.tools