TCL Technoly Electronics OH00003 Atlas User Manual 0920

TCL Technoly Electronics (Huizhou) Co., Ltd. Atlas 0920

User Manual-0920

Download: TCL Technoly Electronics OH00003 Atlas User Manual  0920
Mirror Download [FCC.gov]TCL Technoly Electronics OH00003 Atlas User Manual  0920
Document ID3147761
Application IDmBI2pobrhcIZkBXGqsuX5w==
Document DescriptionUser Manual-0920
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize44.07kB (550826 bits)
Date Submitted2016-09-27 00:00:00
Date Available2016-09-28 00:00:00
Creation Date2016-09-22 15:50:20
Producing SoftwareAdobe Acrobat Pro 9.0.0
Document Lastmod2016-09-22 15:50:36
Document TitleUser Manual-0920
Document CreatorAdobe Acrobat Pro 9.0.0

Download the TrackR app
Compatible devices
Turn on Bluetooth®
Connect to home Wi-Fi
For continually updated instructions on
how to set up your atlas devices,
please go to:
Search the App Store®
or Google Play® for “TrackR.”
iPhone® 5 & later, iPad® 3rd Gen.
& later and Android® 4.4 & later.
Make sure your phone’s
Bluetooth is turned ON.
Your Wi-Fi should be on a
2.4GHz wireless network.
5GHz is not currently
supported.
www.TheTrackR.com/atlasSetup
SAFETY INSTRUCTIONS
• Do not use this product near water
or expose the product to dripping
or splashing of any liquid
• Clean only with a dry cloth
• Do not install near any heat sources
such as radiators, heat registers, stoves
or other apparatus that produce heat
• Only use attachments and accessories
specified by the manufacturer
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance of 20cm
between the radiator and your body.
FCC AND IC INFORMATION
QUICK START GUIDE
FCC STATEMENT
IC STATEMENT
1. This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
1. This device complies with Industry Canada’s
license-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
2. Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
2. Changes or modifications not expressly approved
• Reorient or relocate the receiving antenna.
by the party responsible for compliance could void
• Increase the separation between the equipment
the user’s authority to operate the equipment.
and receiver.
NOTE: This equipment has been tested and found
• Connect the equipment into an outlet on a
to comply with the limits for a Class B digital device,
circuit different from that to which the receiver is
pursuant to Part 15 of the FCC Rules. These limits
connected.
are designed to provide reasonable protection against
• Consult the dealer or an experienced radio/TV
harmful interference in a residential installation.
technician for help.
1. Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes:
(1) L’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
2. Les changements ou modifications non
expressément approuvés par la partie responsable
de la conformité pourraient annuler l’autorisation de
l’utilisateur à utiliser l’équipement.
Please visit:
www.TheTrackR.com/atlasSetup
Email: Support@TheTrackR.com


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:09:22 15:50:20+08:00
Creator                         : Adobe Acrobat Pro 9.0.0
Modify Date                     : 2016:09:22 15:50:36+08:00
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2016:09:22 15:50:36+08:00
Creator Tool                    : Adobe Acrobat Pro 9.0.0
Format                          : application/pdf
Document ID                     : uuid:8d7dfe91-db5e-4a42-a901-beda462d1411
Instance ID                     : uuid:06a299f4-fc4c-4ffa-83dc-84a614f827f7
Producer                        : Adobe Acrobat Pro 9.0.0
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ZVAOH00003

Navigation menu