TCT Mobile 368 HSPA+ AP User Manual One Touch Y280 USER GUIDE

1

U ser Manual

2

Safety

Safety Precautions

Precautions

Read the safety precautions carefully to ensure the correct and safe use of your

wireless device.

Do not switch on your device when the device use is prohibited or when

the device use may cause interference or danger.

Follow the rules or regulations in hospitals and health care facilities.

Switch off your device near medical apparatus.

Switch off your device in an aircraft. The device may cause interference

to control signals of the aircraft.

Switch off your device near high-precision electronic devices. The

device may affect the performance of these devices.

Do not attempt to disassemble your device or its accessories. Only

qualified personnel are allowed to service or repair the device.

Do not place your device or its accessories in containers with strong

electromagnetic field.

Do not place magnetic storage media near your device. Radiation from

the device may erase the information stored on them.

Do not put your device in a high-temperature place or use it in a place

with flammable gas such as a gas station.

Keep your device and its accessories away from children. Do not allow

children to use your device without guidance.

Use approved batteries and chargers only to avoid explosion.

Observe the laws or regulations on device use. Respect others

’

privacy

and legal rights when using your device.

It is recommended that the equipment only be used in the environment where

temperature is between -1 0

℃

and 50

℃

and humidity is between 10% to 90%. Keep

the equipment in the environment where temperature is between -10

℃

and 70

℃

or

humidity is between 10% to 90%.

3

Content

Safety

Safety Precautions

Precautions

................................................................................................................

2

1.

1. Overview

Overview

.............................................................................................................................

5

1.1

1.1 System

System

System Requirements

Requirements

...............................................................................................

5

1.2

1.2 Screen

Screen

Screen description

description

.....................................................................................................

5

1.3

1.3 Connect

Connect

Connect in

in

in Wi-Fi

Wi-Fi

Wi-Fi mode

mode

mode ..............................................................................................

..............................................................................................

.............................................................................................. 6

6

2.

2. Web

Web

Web UI

UI

UI configuration

configuration

configuration .......................................................................................................

.......................................................................................................

....................................................................................................... 6

6

2.1

2.1 login

login

login the

the

the configuration

configuration

configuration page

page

page ...................................................................................

...................................................................................

................................................................................... 6

6

2.2

2.2 Main

Main

Main page

page

.....................................................................................................................

7

3.

3. Quick

Quick

Quick Setup

Setup

........................................................................................................................

9

4.

4. Connection

Connection

.........................................................................................................................

9

4.1

4.1 Connection

Connection

Connection status

status

......................................................................................................

9

4.2

4.2 Profile

Profile

Profile management

management

.................................................................................................

10

4.3

4.3 Network

Network

Network .......................................................................................................................

.......................................................................................................................

....................................................................................................................... 10

10

4.4

4.4 PIN

PIN management

management

......................................................................................................

11

4.5

4.5 Connected

Connected

Connected Mode

Mode

.......................................................................................................

11

5.

5. SMS

SMS

....................................................................................................................................

11

6.

6. Settings

Settings

.............................................................................................................................

12

6.1

6.1 Wi-Fi

Wi-Fi

.............................................................................................................................

12

6.2

6.2 WPS

WPS

..............................................................................................................................

13

6.3

6.3 Router

Router

..........................................................................................................................

13

6.4

6.4 Language

Language

....................................................................................................................

14

6.5

6.5 System

System

System .........................................................................................................................

.........................................................................................................................

......................................................................................................................... 14

14

7.

7. Battery

Battery

Battery Charging

Charging

.............................................................................................................

15

4

8.

8. Warranty

Warranty

............................................................................................................................

15

9.

9. Q&A

Q&A

....................................................................................................................................

16

10.

10. Warning

Warning

Warning and

and

and Precautions

Precautions

...........................................................................................

20

5

1.

1. Overview

Overview

Th is device allows you to share a secure Mobile Broadband internet connection using

Wi-Fi. You can connect most Wi-Fi enabled devices to it (for example PCs, mobile

gaming devices, Smart phones, tablet ).Th is device should not be used in a confined

space where air flow is limited, for instance inside a jacket pocket or inside a hand bag

etc.

1.1

1.1 System

System

System Requirements

Requirements

To

use th is device you need a device with Wi-Fi capability (supporting Wi-Fi 802.11

b/g /n ) and a web browser.

1.

1. 2

2

2 Screen

Screen

Screen description

description

The description for the Screen as bellow :

Fig 1.1

Tab

1.1

Screen description:

1

1Network Signal( Dynamic graphical symbol )

2

2Network type (3G+/3G/2G)

3

3SMS status (Full, unread, incoming)

4

4Connection status(Connected and Disconnected )

5

Wi-Fi (Number of user s connected/

WPS connection )

6

6Battery level( Dynamic graphical symbol/In charge )

7

7Name of the network registered

8

8Roaming status

9

9Current volume used(MB/GB)

10

10 Dial mode(Manual/Automatic)

Category Icon Display

Signal Strength

From 1 signal to excellent signal

Network type

: Edge/GPRS : UMTS/HSDPA/HSUPA : HSPA+

SMS status

:SMS is available

:Unread SMS

:SMS is full

6

Note: the information is displayed for 20 seconds, then the screen powers off. A nd

you can short press WPS button to active it .

1.

1. 3

3

3 Connect

Connect

Connect in

in

in Wi-Fi

Wi-Fi

Wi-Fi mode

mode

Step

Step 1:

1:

1: Use the Wi-Fi manager on the Wi-Fi embedded device to select network

name (SSID).

◆From a Windows PC: Right-click Wireless

Wireless

Wireless network

network

network connection

connection

connection on the task bar,

and select View Available Networks. Choose

SSID

from the list of available networks.

◆From a Mac computer: Select System Preferences - > Airport. Choose

SSID

from the

dropdown menu.

◆From a n iOS device : Settings->Wi-Fi. Choose SSID from the available Network s .

◆From a n Android device : Settings->Wireless controls->Wi-Fi settings. Choose SSID

from the available Network s .

Step

Step 2:

2:

2: Enter the Wi-Fi key when prompted for a security key.

2.

2. Web

Web

Web UI

UI

UI configuration

configuration

2.

2. 1

1

1 login

login

login the

the

the configuration

configuration

configuration page

page

Open the browser, and then input the address http://192.168.1.1 . The page displayed

as bellow:

Connection Status

connected

Wi-Fi status

: Wi-Fi is active

:Number of Wi-Fi

user

:WPS is active

:WPS connected successfully

:WPS connected failed

Battery

: From 1 level to 4 level

:Low power

Dial mode

:automatic

:manual

Roaming

:on r oaming network

7

Fig 2 . 1

The default login password is admin

admin

admin .

2.

2. 2

2

2 Main

Main

Main page

page

A fter login successfully, the page displayed as bellow:

8

Fig 2 . 2

The icon description as bellow:

Tab

2.1

Category Icon Display

Signal Strength

From no signal to excellent

Connection

Status

Disconnect Connected

SMS

disable, enable, SMS is full, Unread

Battery

From lowest power to full power

Wi-Fi status

Wi-Fi is active

9

3

3 .

.

. Quick

Quick

Quick Setup

Setup

Admin

Admin Password

Password

Password :

Login

Login

Login Password

Password

Password : Set the password for login.

Wi-Fi

Wi-Fi Settings:

Settings:

SSID

SSID

SSID : Set the network name of this device .

Security

Security

Security : Configure the security mode for Wi-Fi connection.

Select an encryption mode in the list and set your password.

If you select "None", any Wi-Fi enabled device can connect to the device without

the password.

WEP

WEP : L ower security. Works with older Wi-Fi devices.

Recommended only if your devices don't support WPA or WPA2.

WPA

WPA : A strong security standard, supported by most Wi-Fi devices.

8 to 63 ASCII characters needed.

WPA2

WPA2 : A stronger, newer security standard. Limited to newer Wi-Fi devices.

8 to 63 ASCII characters needed.

4

4 .

.

. Connection

Connection

Y ou can move the mouse to "Connection" and click the items you want. I n this section,

the following item s are included :

Connection

Connection

Connection Status:

Status:

Status: current connection, WAN status, WLAN status;

Profile

Profile

Profile management:

management:

management: manage account settings, which includes your preferred

network connection as well as the Access Point Name (APN).

Network:

Network:

Network: choose and set up preferred network settings.

�

�PIN

PIN management:

management:

management: manage PIN, enable/disable/change/verify;

Connected

Connected

Connected device:

device:

device: display the device connected;

C

C

C onnection

onnection

onnection Mode

Mode

Mode : Set the dial mode of this device, default is Auto .

4

4 .1

.1

.1 Connection

Connection

Connection status

status

Current status



Active profile : Select the profile you want to use from the drop down box .



Usage: the usage for current connection;



Duration time: the duration for current connection;

WAN status



Network name: the 3G network you used;



Network type: GPRS/EDGE/UMTS/HSDPA/HSUPA/HSPA+;



Roaming: display whether you are in roaming network or not;



IP address : this is the IP address arranged for this device .

10

WLAN status



SSID : the network name of this device .



Security: the cipher type of the Wi-Fi used;



User: the users connected to this device and max capacity ;

4

4 .

.

. 2

2

2 Profile

Profile

Profile management

management

Add a new profile:

1, Click <New>;

2, Input the correct parameters you get from the operator;

Note: Profile Name/Number/APN is the mandatory to be filled.

3, Click <Save>;

Edit a profile:

1, Select the profile from the connection profile list;

2, Change the parameters;

3, Click <Save>;

Delete a profile:

1, Select the profile from the connection profile list;

2, Click <Delete>;

3, On the pop up dialog ” are you sure to delete this profile? ” ,click <OK>;

Note: the default profile can not be deleted.

Set as default:

1, Select the profile from the connection profile list;

2, Click <Set default>;

3, On the pop up dialog ” are you sure to set this profile as default? ” , click <OK>.

Note: Once set the profile as default,(D) will be added as a mark.

4

4 .

.

. 3

3

3 Network

Network



Network Mode:Automatic/3G only/2G only, default is automatic



Network Selection: Automatic/Manual, default is automatic

Select a Network Manually

1,Choose Manual in the network selection;

2,Click <Apply>;

3,Click <Refresh> to list the available network;

4,Choose the network and Click <Select> to register;

Note: For the Services,3G+ (HSPA+),3G( HSUPA/HSDPA/UMTS),2G(Edge/GPRS);

For the Status, Active( the network registered), Available( the network can be used).

11

4

4 .

.

. 4

4

4 PIN

PIN management

management

Enable PIN

1, When PIN is disable, click <Enable>, PIN input page is displayed;

2, Enter the PIN you want to set, only number is accepted;

3,Click <Apply>;

Disable PIN

1, When PIN is enable, click <Disable>, PIN input page is displayed;

2,Enter the correct PIN;

3,Click <Apply>;

Change PIN

1, When PIN is enable, click <Change PIN>,PIN input page is displayed;

2,Enter the Old PIN/New PIN/Confirm PIN;

3,Click <Apply>;

Note: when you entered wrong PIN 3 times, PUK is needed, you can get this key from

the operator.

4

4 .

.

. 5

5

5 Connected

Connected

Connected Mode

Mode

Manual

Manual : The device dials to connect to Internet by clicking "Connect" button in the

connection page.

Auto

Auto : The device dials automatically to connect to Internet when user turn it on.

Default is Auto

Auto

Auto .

5

5 .

.

. SMS

SMS

Y ou can move the mouse to " SMS " and click the items you want. I n this section, the

following item s are included :

Read

Read

Read :

:

:list the SMS received ;

�

�New

New

New :

:

:write the new SMS ;

Sent:

Sent:

Sent: list the SMS sent successfully .

Draft:

Draft:

Draft: save the SMS not sent or sent failed .

�

�SMS

SMS

SMS settings:

settings:

settings: set the SMS center number and the SMS saved location ;

Read

Read SMS

SMS

Left click the content of the SMS to read;

Sent

Sent SMS

SMS

12

1,Move the mouse to “ SMS ” ;

2,Left click “ Write SMS ” ;

3,Input the number and the content;

4,Click <Sent>;

F

F orward

orward

orward SMS

SMS

1,Left click the content of the SMS you want to forward;

2,Click <Forward>;

3,Input the number;

4,Click <Sent>;

Reply

Reply SMS

SMS

1,Left click the content of the SMS you want to reply;

2,Click <Reply>;

3,Input the content;

4,Click <Sent>;

Delete

Delete SMS

SMS

1,Left click the Mark of the SMS you want to delete;

2,Click <Delete>;

Delete

Delete all

all

all SMS

SMS

1,Click <Mark All>;

2, Click <Delete>;

SMS

SMS settings

settings

SMS Center Number : You can get it from your operator;

SMS Save Mode : the location SMS stored, default is SIM card;

6

6 .

.

. Settings

Settings

Y ou can move the mouse to " Settings " and click the items you want. I n this section,

the following item s are included :

Wi-Fi

Wi-Fi

Wi-Fi :

:

:set the parameters related to Wi-Fi ;

�

�WPS

WPS

WPS :

:

:set the method used for WPS ;

�

�Router

Router

Router :

:

:set the parameters related to router ;

�

�L

L

L anguage:

anguage:

anguage: set the language displayed on the web UI

�

�System:

System:

System: display the device information ,

,

,save & restore the configuration;

6.1

6.1 Wi-Fi

Wi-Fi

In this page, you can set the parameters of Wi-Fi.

13

802.11 Mode: selected the mode used, such as 802.11 b/802.11 g/802.11 n;



SSID: This is the name of Wi-Fi network , which was used to identify your Wi-Fi

network. The length of the SSID should be 1-32 characters including “ _ ” .



Wi-Fi Channel: Different domain has different channels (Channel 1~11 in FCC

(US)/IC (Canada); Channel 1~13 in ETSI (Europe); Channel 1~13 in MKK

(Japan)).



Max Number of Users: Set the maximum number of Wi-Fi users. The default and

maximum value is “ 10 ” .

6.2

6.2 WPS

WPS

WPS (Wi-Fi Protected Setup) provide a more intuitive way of wireless configuration

between your device and the wireless client. Please make sure that the client support

WPS .



PBC(Push Button Configuration):

1, Long press WPS button of this device until WPS show in the screen;

2, On the client (eg PC), select the Wi-Fi access utility which includes WPS

support (provided by PC vendor) and select the PBC.

3, Login web page(192.168.1.1),settings->WPS;

4, Enable PBC and click " ";

Note: If the WPS function start correctly, the info will display in the page as bellow:

"PBC operation successfully!", E lse displayed "PBC operation failed" to indicate

the problem happened during the WPS setup.

PIN:

1, Long press WPS/Wake Up button of this device until WPS show in the screen;

2, On the client (eg PC), select the Wi-Fi access utility which includes WPS

support (provided by PC vendor) and select the PIN method, then a 8 digits

PIN code will be generated;

3, Login web page(192.168.1.1),settings->WPS;

4, Enable PIN and entered the 8 digits PIN code;

5, Click <Apply>;

Note: If the WPS function start correctly, the info will display in the page as bellow:

"PIN submit successfully!", else displayed" PIN submit failed!" to indicate the problem

happened during the WPS setup.

6.3

6.3 Router

Router

This page gives you the following status information:

DHCP

14



Router IP Address: The router's IP address on the LAN. The default setting is

“ 192.168.1.1 ” .



Subnet Mask: The router's internal LAN subnet mask. The default setting is

“ 255.255.255.0 ” .



Host name: the name of the server.



DHCP Server: DHCP Server will automatically assign IP addresses to devices on

the network. The default setting is “ Enable ” .



DHCP IP Pool: Set a range of IP addresses available to access.



DHCP Lease Time: Amount of time that a Wi-Fi enabled device can use its

assigned IP address before it is required to renew the lease.

MAC

MAC Filtering

Filtering

MAC filtering is used to control specific MAC addresses to access.



Select “ Disable " : All terminal devices are allowed to access the network.



Select “ Enable ": Only devices in this list are allowed to access the network.

You can add , edit or delete the configuration .

Note: T he maximum allowed MAC list is 10.

6.4

6.4 Language

Language

Change language:

1,Choose the language, ;

2, Click <Apply>.

T he default language is English .

6.5

6.5 System

System

Reboot

Click <R eboot > to restart the device.

Reset

Reset the device to the original factory settings. you can also use the hardware reset

button on the bottom of the device, marked with R.

S

S ave

ave

ave the

the

the configuration

configuration

1,Click <Backup>;

2,Select the location to save current settings.

R

R estore

estore

estore the

the

the configuration

configuration

1,Click <Restore>;

2,Select a file saved previously to restore the settings.

15

7

7 .

.

. Battery

Battery

Battery Charging

Charging

There are two types of charging, one is via Main charger, the other is via PC USB

cable.

Charging rates depend on whether the device is connected to the 3G network ,

whether the Wi-Fi is transmitting, and whether the device is connected to the mains

charger or to a PC. And the mains charger is recommended as the main charging.

Main

Main charger:

charger:

When power off, it will take a maximum of 3 hours.

PC

PC USB

USB

USB Cable:

Cable:

When power off, it will take a maximum of 4 hours.

Note: In order to protect the battery, when low power is indicated, please do

charging;

8

8 .

.

. W

W

W arranty

arranty

•

The device is warranted against any deviation from technical specifications for a

period of twelve (12) months from the date specified on your original invoice

1

.

•

Under the terms of this warranty, you must immediately inform your vendor in

case of a conformity defect on th is device , and present a proof of purchase.

•

The vendor or repair center will decide whether to replace or repair this device , as

appropriate.

•Repaired or replaced this device are warranted ONE (1) month unless there are

statutory provisions to the contrary.

•

This warranty shall not apply to damage or defects to this device due to:

1) N ot following the instructions for use or installation,

2) N ot being compliant with technical and safety standards applicable in the

geographical area where th is device is used,

3) I mproper maintenance of sources of energy, and of the overall electric

installation,

1

The mandatory warranty period may vary if overriding statutory provisions are applicable in

your jurisdiction.

16

4) A ccidents or consequences of theft of the vehicle in which this device is

transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids,

inclement weather,

5) C onnecting to or integrating into this device any equipment not supplied or not

recommended by the manufacturer,

6) A ny servicing, modification or repair performed by individuals not authorised by

the manufacturer, the vendor or the approved maintenance centre,

7) U se of this device for a purpose other than that for which it was designed,

8 ) M alfunctions caused by external causes (e.g., radio interference from other

equipment, power voltage fluctuations),

9 ) F aulty connections resulting from unsatisfactory radio transmission or caused by

the absence of radio relay coverage.

•

Warranty is also excluded for this device on which markings or serial numbers

have been removed or altered.

•

This device is also warranted against hidden defects (defects inherent in the

design, manufacture, etc.).

•There are no other express warranties than this printed limited warranty,

expressed or implied, of any nature whatsoever.

•

In no event shall the manufacturer be liable for incidental or consequential

damages of any nature whatsoever, including but not limited to trading loss,

commercial loss, to the full extent those damages can be disclaimed by law. Some

countries/states do not allow the exclusion or limitation of incidental or

consequential damages, or limitation of the duration of implied warranties, so the

preceding limitations or exclusions may not apply to you.

9

9 .

.

. Q&A

Q&A

1. Q: How to turn on/ off t his device ?

A: Switch the button down to the “ ON ” to turn on the device.

Switch the button down to the “ OFF ” to turn off the device.

2 . Q: Which browser does the device support?

A: It supports Firefox, Saf a ri, IE 7 .0---- 10 .0,Opera; Chrome;

17

3 . Q: Which OS does the device support?

A: It supports windows Xp/Vista/7/8; Mac OS X10.5----10.8;

4. Q: How to connect to the device?

A: Open your wireless network connection list and select the relative SSID.

Windows: Right-click Wireless

Wireless

Wireless network

network

network connection

connection

connection on the task bar,

and select View Available Networks.

Mac: Pull down list from AirPort icon.

Select the SSID from the dropdown menu .

iOS: Settings->Wi-Fi. Choose

the SSID

from the available Network s .

Android: Settings->Wireless controls->Wi-Fi settings. Choose

SSID

from the

available Network s .

5. Q: How to do if I see the SSID but failed to connect?

A: <1, Check the password you entered is the right one;

<2, Touch “ WPS/Wake up ” key to light the screen to check the Wi-Fi

users connected, the maximum users permitted is 10 .

<3, Check if WPS security enabled on your PC? If so, check the device

to see if it is expecting a WPS action from your PC.

6. Q: How to do if No service displayed on the screen?

A: the possible reason are listed as bellow:

< 1. Unstable local signal.

< 2 . Hardware problem.

You may:

<1. If you are inside a building or near a structure that may be blocking

the signal, change the position or location of the device. For example,

try moving the device close to a window.

<2 . Check the hardware or use another device and retry.

<3 . Check the device Status Display for error messages or information.

7. Q: How to do if I forgot Wi-Fi Key?

18

A: You can reset the device to factory defaults by long press the master

reset button on the bottom of the device, marked with R.

8. Q: Why the SSID does not appear in the wireless network list ?

A: you can check the device as the suggestion bellow:

● Check the device Status Display for error messages or information.

● Refresh your network list on your computer.

Windows: Click Refresh Network List on the left side of the Wireless

Network Connection screen.

If that does not work you can try the following:

< 1. Open Network Connections.

< 2. Right-click Wireless Network Connection and select Properties.

< 3. Click the Wireless Networks tab.

< 4. Delete any unused wireless connections from the Preferred Networks list

and click OK.

< 5. Restart your computer.

Mac: Try rebooting your computer

9. Q: How to do if “ No SIM ” or “ SIM invalid ” d isplay ed on the screen ?

A: the possible reason as bellow:

<1,There is no SIM card inserted or inserted incorrectly.

<2,The SIM card is de-activated.

You may:

<1,Pull out and re-insert the SIM card. Be careful not to touch the contact

points when handling the SIM card.

<2,Contact your operator for advice

10. Q: How to do if “ PIN lock ” or “ PUK lock ” displayed on Screen ?

A: The SIM card is locked. Login Web page and Enter your PIN code or

PUK code you got from the operator.

Note: if you entered wrong PIN 3 times, then PUK is needed,

and if the wrong PUK entered 10 times, the SIM card will be locked forever.

11. Q: How to find out the network technology and provider currently in use?

A: <1, Touch “ WPS/Wake up ” to light the screen,

19

: Edge/GPRS : UMTS/HSDPA/HSUPA : HSPA+

<2,Login web browser, go to Connection->Connection Status

12. Q: How to connect to the 3G network?

A: Press and hold more than 2 seconds the connect button to connect or

login the web browser, go to Connection->Connection status, click "Connect"

13. Q: How to disconnect from the 3G network?

A: Press and hold more than 2 seconds the connect button to disconnect or

login the web browser, go to Connection->Connection status,

click "Disconnect"

14. Q: How to set a new PIN for my SIM card?

A: Login web browser, Go to Connection->PIN Management

15. Q: Where can I find information about Internet connectivity and Wi-Fi setup?

A: Login web browser, Go to Connection->Connection status

16. Q: How to check the volume and time i used before ?

A: Login web browser, Go to Connection-> Connection status ->Usage History

17. Q: How to search the network manually ?

A: Login web browser, Go to Connection->Network, choose manual for

network selection, click <Apply>,then click <Refresh>.

18. Q: How to check the model number and firmware versions of my device ?

A: Login web browser, go to Settings->System

19. Q: Can I backup and restore my configuration settings?

A: Login web browser, go to Settings->Advanced settings, click "Backup"

to backup and "Restore" to restore.

20. Q: H ow to set the device dials to connect internet automatically

when turn on the device ?

20

A: login web browser, and go to Connection->Connection mode->Auto

21. Q: H ow to change the SSID ?

A: login web browser, and go to Quick setup->Wi-Fi Settings->SSID

22. Q: H ow to change the login password ?

A: login web browser, and go to Quick setup->admin setup->login password

23. Q: H ow to change the Wi-Fi Key ?

A: login web UI, and go to Quick setup->Wi-Fi Settings ->Security

10

10 .

.

. Warning

Warning

Warning and

and

and Precautions

Precautions

Electronic

Electronic Device

Device

Turn off your device near high-precision electronic devices. The wireless device may

affect the performance of these devices. Such devices include hearing aids,

pacemakers, fire alarm system, automatic gates, and other automatic devices can be

affected. If you are using an electronic medical device, consult the device

manufacturer to confirm whether the radio wave affects the operation of this device.

Hospital

Pay attention to the following points in hospitals or health care facilities:



Do not take your wireless device into the operating room, intensive care unit, or

coronary care unit.

Do not use your wireless device at places for medical treatment where wireless

device use is prohibited.

Storage

Storage Environment

Environment



Do not place magnetic storage media such as magnetic cards and floppy disks

near the wireless device. Radiation from the wireless device may erase the

information stored on them.



Do not put your wireless device and other accessories in containers with strong

magnetic field, such as an induction cooker and a microwave oven. Otherwise,

circuit failure, fire, or explosion may occur.

21



Do not leave your wireless device in a very hot or cold place. Otherwise,

malfunction of the products, fire, or explosion may occur.



Do not subject your wireless device to serious collision or shock. Otherwise,

wireless device malfunction, overheat, fire, or explosion may occur.

Children

Children Safety

Safety

Put your wireless device in places beyond the reach of children. Do not allow

children to use the wireless device without guidance.



Do not allow children to put the device in mouth.



Do not allow children to touch the small fittings. Otherwise, suffocation or gullet

jam can be caused if children swallow the small fittings.

Operating

Operating Environment

Environment



The wireless device is not water-resistant. Keep it dry. Protect the wireless device

from water or vapor. Do not touch the wireless device with a wet hand. Otherwise,

short-circuit and malfunction of the product or electric shock may occur.



Do not use the wireless device in dusty, damp and dirty places or places with

magnetic field. Otherwise, malfunction of the circuit may occur.

On a thunder stormy day, do not use your wireless device outdoors.



The wireless device may interfere with nearby TV sets, radio and PCs.



In accordance with international standards for radio frequency and radiation, use

wireless device accessories approved by the manufacturer only.

Traffic

Traffic Safety

Safety

When driving, do not use the device .



When switched on, th is device emits electromagnetic waves that

can interfere with the vehicle ’ s electronic systems such as ABS anti-lock brakes

or airbags. To ensure that there is no problem , do not place th is device

on top of the dashboard or within an airbag deployment area.



Check with your car dealer or the car manufacturer to make sure that the

dashboard is adequately shielded from this device RF energy.

Conditions of Use

•

Switch th is device off before boarding an aircraft.

•

Switch th is device off when you are in health care facilities, except in

22

designated areas. As with many other types of equipment now in regular use,

th is device can interfere with other electrical or electronic devices,

or equipment-using radio frequencies.

•

Switch th is device off when you are near gas or flammable liquids. Strictly

obey all signs and instructions posted in a fuel depot, petrol station, chemical plant,

or in any potentially explosive atmosphere.

•

When th is device is switched on, it should be kept at least 15 cm from any

medical device such as a pacemaker, a hearing aid or insulin pump, etc.

•

Do not let children use th is device without supervision.

•

When replacing the cover, please note that th is device may contain

substances that could create an allergic reaction.

• Always handle th is device with care and keep it in a clean and dust-free place.

•

Do not open, dismantle or attempt to repair th is device yourself.

•

Do not drop, throw or bend th is device.

•

Do not paint it.

Collection Point:

This symbol on this device means that these products must be taken to

collection points at the end of their life:

Municipal waste disposal centers with specific bins for these items of equipment .

Collection bins at points of sale.

They will then be recycled, so that their components can be reused , and to prevent

substances being disposed of in the environment .

In European Union countries:

These collection points are accessible free of charge.

All products with this symbol must be brought to these collection points.

In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your

jurisdiction or your region has suitable recycling and collection facilities; instead they

are to be taken to collection points for recycling. In the United States, please visit

www.recyclewirelessphones.org for more information on recycling wireless products.

Protectiont o againsti s theft

This device is identified by an IMEI (modem serial number) shown on

the packaging label. We recommend that you note the number the first time

you use your this device by login web browser and go to "Settings" ->

"System" to get it.

RF Exposure Information and Statement

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types

Y580Y (FCC ID: RAD368) has also been tested against this SAR limit. The highest SAR

value reported under this standard during product certification for properly worn on the

body is 0.529 W/kg. This device was tested for typical body-worn operations with the

back of the handset kept 10mm from the body. To maintain compliance with FCC RF

exposure requirements, use accessories that maintain a 10mm separation distance between

the user's body and the back of the handset. The use of belt clips, holsters and similar

accessories should not contain metallic components in its assembly. The use of accessories

that do not satisfy these requirements may not comply with FCC RF exposure requirements,

and should be avoided.

This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: Changes or modifications made to this equipment not expressly approved by

TCT Mobile Limited may void the FCC authorization to operate this equipment.

23

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

24

TCT Mobile 368 HSPA+ AP User Manual One Touch Y280 USER GUIDE

TCT Mobile Limited HSPA+ AP One Touch Y280 USER GUIDE

User Manual

Navigation menu

Namespaces

Views

Navigation